Integra MicroFrance. Integra ENT - Nose catalogue. Document for use in Europe, Middle-East and Africa only.

Transcription

1 Integra MicroFrance Integra ENT - Nose catalogue Document for use in Europe, Middle-East and Africa only.

2 Table of contents Table of contents Ordering and warranty informations Indications - Contraindications ii vi vii Elevator, raspatory 10 Curved elevator 10 Curved raspatory 10 Double elevator 10 Diagnosis 2 Air bag 2 Angled probe caustic holder 3 Blunt hook 3 Catheter probe 2 Cotton applicator 3 Diagnostic device 2 Electrode cautery 2 Screws speculum 2 Spring speculum 2 Speculum with handle 4 Adapter for cold light cable 5 Cold light cable 5 Self-retaining speculum 4 Self-retaining speculum with fiber optic 5 Speculum with handle left hand 4 Vienna speculum 4 Flexible tension arm 6 Articulated kneecap 6 Complete tension arm 6 Malleable blade 6 Self-retaining speculum 6 Speculum holder 6 Table clamp 6 Angled dissecting forceps 7 Serrated jaws, angled 7 Serrated jaws, bayonet 7 Spoon jaws, angled 7 Spoon jaws, bayonet 7 With teeth, angled 7 With teeth, bayonet 7 Angled forceps 8 Serrated jaws 8 Smooth jaws 8 Spoon jaws forceps 8 Syringe 9 Injection needles 9 Injection needles 9 Pushing syringe 9 Replacement tube 9 Silicon grey washer luer 9 Silicon white washer 9 Syringe luer-lock 9 Suction tube elevator 11 Bayonet tube 11 Curved self-retaining retractor 11 Malleable suction tube elevator 11 Malleable tube 11 Sharp with finger control 11 Smooth with finger control 11 Suction tube elevator with irrigation 11 Scalpel 12 Knife blade 12 Scalpel handle 12 Knives 13 Bayonet swivel knife 13 Button end angled knife 13 Straight knife 13 Curved raspatory 14 Curved raspatory, square tip 14 Sharp curved raspatory 15 Straight raspatory 15 Retractor 16 Blunt retractor 16 Double blunt retractor 18 Double retractor 16 Double retractor blunt with loop and ball 20 Knife guide and retracotr 20 Right angled double retractor 18 Round sharp hook 16 Sharp retractor 17 Sharp retractor, articulated 16 Z double retractor 18 Curette 21 Antrum angled curette 23 Antrum fenestrated curette 23 Curved self-retaining retractor 23 Double 22 Malleable curved 22 Spoon and blunt hook 22 Mallet 24 Chisel 25 Bayonet gouge 25 Gouge 25 Straight chisel 25 ii

3 Table of contents Osteotome 26 Curved osteotome 26 Straight osteotome 26 Guarded osteotome 27 Curved left 27 Curved rigth 27 Straight 27 Double guarded osteotome 28 Double guarded osteotome 28 Osteotole gouge 28 Fine osteotome 29 Curved chisel 29 Guarded osteotome curved left 29 Guarded osteotome curved right 29 Straight graduated osteotome 29 Straight guarded osteotome 29 Saw, Straight rasp 30 Bayonet saw 30 Diamond surface rasp straight 30 Downstroke rasp 30 Straight saw 30 Curved rasp 31 Bi-directional cutting 31 Cross-cutting 31 Cutting in line 31 Diamond curved rasp 31 Downward cutting 31 Upward cutting 31 Sure-grip tungsten rasp, 210 mm 32 Coarse grit 32 Fine grit 32 Nasal splint, cartilage template, crushing press 33 Cartilage crushing press 33 Cartilage template 33 Nasal splint 33 Caliper, Ruler, Lacrimal probe, bone forceps 34 Bone forceps 34 Caliper 34 Lacrimal probe 34 Ruler 34 Rongeur 35 Bone scissors, Bone rongeur 37 Bone rongeur 37 Bone scissors 37 Septum forceps 38 Small scissors, pointed 39 Long scissors, pointed 40 Small scissors, blunt 41 Long scissors, blunt 42 Small Metzenbaum scissors 43 Mayo scissors 44 Scissors, serrated blades 45 Scissors, serrated blades 46 Dural scissors, serrated straight blades 46 Straight scissors, serrated bayonet blades 46 Straight scissors, serrated blades 46 Wire cutting dural scissors 46 Fine dissecting forceps 47 Dissecting forceps serrated jaws 47 Dissecting forceps with teeth 47 Dissecting forceps with teeth and plateform 47 Forceps with horizontal teeth and plateform 47 Adson dissecting forceps 48 Medium dissecting forceps 49 Dissecting forceps, 180mm 51 Dissecting forceps, 200mm 52 Medium bipolar dissecting forceps 53 Medium monopolar dissecting forceps 54 Tungsten needle-holder 55 Fine haemostatic forceps 56 Medium haemostatic forceps 57 Strong haemostatic forceps 58 Suction tube with finger control 59 Micro suction tube - adapters 60 Angled suction tube 60 Curved suction tube 60 Luer-lock US Adapter 60 Suction tube adapter 60 Blunt suction tube 61 iii

4 Table of contents Nasal snare, trocar 62 Cup forceps 62 Drain 62 Guide for drain 62 Nasal snare 62 Snare stylet 62 Snare wire 62 Trocar and cannula 62 Dessi rhinnigation 63 Rhinoclean for scope sleeve 63 Scope sleeve 63 Sterile irrigation tubing 63 Displacer elevator, seeker, knot pusher 64 Displacer elevator 64 Double-ended seeker 64 Knife elevator 65 Angled elevator 65 Dacryocystorhinostomy 65 Dissector and knife 65 Knife, tip Sickle knife 65 Cup forceps, Straight jaws 190mm 66 Cup forceps, 45 jaws 67 Cup forceps, 90 jaws 68 Fine cup forceps, curved 69 Cup forceps curved down 70 Cup forceps curved up 71 Cup forceps pear jaws 72 Punch forceps 73 Fine punch forceps 76 Punch rongeur forceps 77 Micro scissors, serrated blades 78 Micro clip applier 79 Micro bipolar forceps 80 Micro bipolar forceps with suction 81 Lemoine, Klossek, Kennedy instruments 83 Drill 83 Hand drill 83 Kennedy Instruments 83 Klossek nail 83 Lemoine nail 83 Vaughan Instruments 84 Cleaning device for cutting punch circular 84 Cutting punch circular 84 Knife and suction tube 84 Suction tube 84 Thru-flow suction cup forceps 84 Parson Instruments 85 Blunt suction tube 85 Container 85 Double-ended probe 85 Double knife 85 Suction curette with finger control 85 Suction tube elevator with finger control 85 Duncavage Instruments 86 Angled elevator 86 Angled palpation probe 86 Angled suction tube elevator 86 Cup forceps 86 Suction tube 86 Through-cutting forceps 86 Levine orbital instrumentation 87 Forceps, serrated jaws 87 Knife and suction tube 87 Knife and suction tube 87 Loop 87 Micro instrument, double 87 Suction curette 87 Suction curette with finger control 87 with finger control 87 Wormald frontal instrumentation 88 Bending tool 88 Knot pusher 88 Loop 88 Malleable probe, double-ended 88 Sterilization case 88 Suction tube 88 Suction tube elevator 88 Micro monopolar instruments 82 Electrode pick 82 Hook 82 Lancet knife 82 Suction tube elevator 82 Suction tube with finger control 82 iv

5 Table of contents Wormald skull base instrumentation 89 Bending tool 89 Container 89 Forceps, curette jaws 89 Palpation probe 89 Scissors 89 Sterilization case 89 Suction basket 89 Suction curette 89 Suction tube 89 Suction tube elevator 89 Tungsten needle-holder 90 Vascular clamp 90 Stamm skull base instrumentation 91 Ball seeker 91 Bipolar cable 91 Bipolar forceps 91 Cup 92 Curette cup forceps 91 Elevator 91 Hook 91 Scissors 91 sterilization case 91 Suction tube 91 Sterilization case, tray, cup, Surgical oil 92 Stainless steel cup 92 Stainless steel tray 92 Sterilization case 92 Surgical instrument oil 92 PLastic sterilization case 93 Numerical index 94 v

6 Ordering and warranty informations Pricing : Prices stated in specific written quotations are firm for thirty days from the date given, and are otherwise subject to change without prior notice. Pricing terms stated on written agreements are governed by such agreements. Minimum Order Requirements : The minimum ordering amount is 250 (Integra reserves the right to apply 20 handling fees and transport fees for any order below 250). For partial unit orders, please contact the customer service to obtain a quote. Administrative fees : Administrative fees may be charged for any order. Ordering Procedure : A written purchase order is required for the purchase of Integra MicroFrance products. Acceptance of Orders : Orders are accepted upon approval by Integra Customer Service. Return Policy : Authorization from Customer Service must be obtained prior to returning product. Sterile product must be returned in unopened, undamaged cartons, packed to prevent damage. Non-sterile product must be returned in unused saleable condition in original package. No credit will be issued for special orders. A credit note will be issued for products returned less than ninety days from shipment date with a 20% restocking fee, provided that the product being returned is not damaged and it is possible to verify that the product has not been used or opened. Integra Limited Warranty Please refer to the warranty included in the packaging of each product to know the applicable warranty. Contact Customer service : France / International +33 (0) (0) (Fax) microfrance@integralife.com Benelux +32 (0) (0) (Fax) custsvcbenelux@integralife.com United Kingdom +44 (0) (0) (Fax) custsvcuk@integralife.com Germany +49 (0) (0) (Fax) custsvcgermany@integralife.com vi

7 Indications - Contraindications MicroFrance ENT Instrumentation INDICATIONS All the medical devices showed in this catalogue have indications for diagnosis and/or ENT surgery. Sizes are not contractual and are given for information purposes only. CONTRAINDICATIONS Do not use in indications other than the indications mentioned in the DFU or Labeling. Title and/or product family How to read the catalogue Consultation Detail view of the instrument Marquet Day Legent Instrument to a 1/1 scale except where mentioned otherwise Explanatory table see below Micro crochets mousse mm 150mm MCO805 2,0mm MCO950 0,8mm ,5mm MCO805A 2,5mm ,0mm Micro crochets mousse mm MCO807 1,0mm Porte-coton 140mm Sonde stylet 110mm ,5mm Document destiné a l Europe, au Moyen-Orient et à l Afrique. 3 Explanation of the table reference and complementary product description Title or subtitles global complementary description Product Ref.1 complementary description1 Product Ref.2 complementary description2 vii

8 Diagnosis Electrode cautery 125mm 7706MF 125mm 7882 Catheter probe Itard 160mm 7706MF 2,5mm Spring speculum, Screws speculum Palmer Palmer-Piquet Vacher 13mm 15mm mm mm mm mm mm mm 7746A (D) Petit 7746B (D) Grand (D) Distributed by Integra MicroFrance SAS (France) Diagnostic device Proetz 7881 Air bag Causse 7717C 2

9 Diagnosis Marquet Day Legent Micro blunt hook 90 Micro blunt hook 45 Cotton applicator Caustic holder 165mm 150mm 165mm 140mm 110mm MCO805 2mm MCO950 0,8mm ,5mm MCO807 1mm MCO805A 2,5mm mm ,5mm 3

10 Speculum with handle Hartmann 160mm 7898 Tieck-Halle Beckman Vienna 140mm MCO237 Self-retaining 130mm mm mm MCO233 4

11 55mm Speculum with handle Killian Rouvier Cottle 75mm 75mm MCEN2 CP CP CP mm 45mm 65mm CP CP CP mm 45mm 75mm CP mm CP624LF-75 75mm Speculum with fiber optic - Cold light cable 220cm - Adapters Wolf MCL171 (D)(1) MCL38N (D) Wolf MCL170 (D)(1) Storz MCL75 Storz MCL174 (D)(1) Storz MCL173 (D)(1) Olympus MCL197 (D)(1) (1) Not a MEDICAL DEVICE (D) Distributed by Integra MicroFrance SAS (France) 5

12 Flexible tension arm Tension arm Legent Darrouzet Table clamp Tension arm with MCO981, MCO982 et MCO983 Tension arm with MCO978S CEV984 CEV985 MCO980 MCO978 Working length 450 mm Working length 250/300mm Accessories for tension arm Self-retaining speculum Speculum holder Malleable blade Articulated kneecap Devèze MCO981D MCO978S MCO981 MCO982 MCO983 MCO983-4 Otologic Nasal 12x85mm 6

13 Angled dissecting forceps Gruenwald Lucae Lucae Politzer 120mm 200mm mm ,50x15mm ,25x15mm 150mm 7726MF 1,10x12mm 7727 curette 7728 with teeth ,50x14mm x14mm 7733 curette 7734 with teeth 160mm ,50x14mm 7

14 Angled forceps 100mm 100mm Scale 1/2 Lubet-Barbon Lubet-Barbon Smooth jaws 7749 Smooth jaws 7750 Rouvier 110mm 100mm Corgill-Hartman Serrated jaws 10mm MCEN18 Serrated jaws 1,7x4mm Spoon jaws forceps Brünings Spoon jaws Fenestrated spoon jaws B B B-2 7,5mm 9,5mm 7,5mm 9,5mm Luc Spoon jaws Fenestrated spoon jaws 7761BC C2 7761C1 7761C2 7761C3 7761BC1 7761BC2 7761BC3 7mm 9mm 11mm 7mm 9mm 11mm 8

15 Syringe Syringe Génia Injection needles (D) 50mm Ø 0,5mm Pack 12 Delivered with syringe 130mm 7779MF-5CC Silicon grey washer luer Replacement tube Silicon white washer 7779MF-2 Pack MF MF-1 Pack 6 Pushing syringe for disposable syringe luer-lock 12cc Pack 2 Chouard Injection needles 110mm bayonet shaft (D) Distributed by Integra MicroFrance SAS (France) 9

16 Elevator, raspatory Howarth Cottle McKenty Sébileau Fleury Lempert Freer 160mm 190mm 180mm 160mm 185mm CP985 MCO305 MCO803 CP611 2mm mm 8,5mm 2,5mm 5mm 220mm 220mm 240mm 3mm CP625 CP626 CP627 10

17 Suction tube elevator Orsel 110mm MCEN39 3mm Guillen Orsel M A L L E A B L E M A L L E A B L E Rouvier Toriumi 180mm CP1102 3,5mm CP1103 blunt 170mm MCEN10 2,5mm 200mm SCP337A 3,5mm 190mm CP337 3mm 200mm CP mm Irrigation 230mm MCEN187 3,5mm 11

18 Scalpel Scalpel handles Knife blade Pack 25 SM63 (D) SM64 (D) SM65 (D) CP821B CP821C CP821D CP821E 100mm 130mm 150mm 190mm 120mm 160mm 200mm 150mm 120mm 130mm 1003IG (D) 1005I (D) 1003LI (D) CP IG (D) CP821C (D) Distributed by Integra MicroFrance SAS (France) Blades 11/15 23 SM63 (D) SM64 (D) SM65 (D) 12

19 Knives Ballenger Joseph Freer Cottle 200mm 160mm 150mm 135mm CP622-4 CP mm 13

20 Curved raspatory Heavy Farabeuf Fleury Sébileau Plester 195mm 150mm 170mm 150mm 180mm MCO979 CP825 MCO988 6,5mm 10mm 6,5mm 4mm 7,5mm 14

21 Curved raspatory Joseph Obwegeser Obwegeser-Tessier Sharp 180mm CP310D 5mm Straight 180mm CP344B 7mm 180mm CP344BT 7mm 180mm CP310E 4mm 180mm CP344C 11mm 180mm CP344CT 11mm 190mm CP344D 7mm 190mm CP344DT 7mm 190mm CP344E 7mm 190mm CP344ET 7mm 180mm CP310 5mm 180mm CP344A 5mm 180mm CP344AT 5mm 15

22 Retractor Army navy Farabeuf Desmarres Gillies Gillies Humby 140mm 140mm 180mm 145mm 145mm 110mm CP CP17 CP17-3 CP628 CP mm 12mm 3mm 2mm 5mm 7768 CP CP17-1 CP mm 2mm 3mm 210mm CP mm 16

23 Retractor Knapp Blair Guthrie Volkmann Senn-Miller 150mm 140mm 140mm 130mm 150mm 180mm 160mm CP CP335 CP609 8mm Sharp 2mm 3 sharp prongs blunt CP21A-3 blunt blunt prongs 17

24 Retractor Claoué Kilner Converse 80mm CP340 95mm CP mm CP341 Converse Jost 120mm 130mm 110mm 125mm CP338 CP CP803 18

25 Retractor Cottle 130mm Aufricht Fomon Joseph Cottle CP23-4 4mm CP23-6 6mm CP23-8 8mm CP23A-8 8mm CP mm 170mm 130mm 130mm 160mm 160mm CP CP

26 Retractor Cottle Neivert Cottle-Neivert Ragnell Dufourmentel 220mm 200mm 200mm 190mm 160mm 170mm CP CP632 CP947 20

27 Curette Volkmann 200mm ,5x3mm x3,5mm ,5x4mm x4,5mm 160mm CP302-4 CP302-5 CP mm 5mm 6mm x5,5mm CP mm 21

28 Curette Lima Frèche Jankowski Klossek 2,2mm 2mm M A L L E A B L E M A L L E A B L E 2,2mm 5mm 250mm 220mm 220mm 200mm 200mm 7774 MCEN104 MCEN109 MCEN106 MCEN107 4x6mm 6x8mm 4x6mm 22

29 Curette 190mm 190mm 190mm 180mm 180mm 190mm 190mm 190mm x5mm 7x11mm 2x5mm 2x5mm 2x5mm 2x5mm 3x9mm 7x10mm x11mm ,5x6mm backward cutting 9x13mm 23

30 Mallet Copper 180mm - 115g Lombard 185mm - 330g mm CP g nylon heads 180mm - 230g CP300 24

31 Chisel Jost Freer Fleury 180mm 160mm 150mm 150mm 130mm CP mm mm CP mm CP mm MCO mm CP mm MCO mm MCO mm MCO mm MCO mm 25

32 Osteotome Aiach Pollet-Pech Rubin Marchac 180mm Curved CP304B-2 Straight CP mm CP mm CP304B-4 CP mm CP304B-6 CP mm CP304B-8 CP mm CP304B-10 CP mm CP304B-12 CP mm 160mm 160mm 170mm 180mm CP317 CP CP304B-4 16mm 13mm 10mm 4mm mm mm 26

33 Guarded osteotome Tessier Jost Marchac Pech-Marchac Claoué Lindas Silver 180mm CP315D CP305L mm CP315G CP305R mm 180mm 180mm 180mm 180mm CP316 CP802 CP315 CP

34 Double guarded osteotome Parkès Mac-Indoe Cinelli Robin mm CP mm mm CP mm CP mm mm CP mm CP mm 180mm 180mm 155mm 160mm CP CP x10mm 14mm 10mm 14-16mm 28

35 Fine osteotome Cottle Cottle Cottle Cottle Becker Anderson-Neivert 10mm 20mm 30mm 20mm 30mm 200mm CP mm 200mm Left 40mm 40mm 50mm 50mm 60mm 70mm mm mm mm mm 190mm 195mm 195mm 190mm 200mm 200mm CP808-6 CP806 CP807 CP mm 6mm 6mm 5mm 2,5mm 4mm 29

36 Saw, Straight rasp Joseph Joseph Maltz Maltz 190mm mm Left 190mm 190mm 170mm 170mm 180mm CP301 CP301-1 CP810 36mm 38mm Right 10x45mm 8x35mm 8x30mm 30

37 Curved rasp Toriumi Belloc Bigot Fomon 160mm CP mm CP975A Aufricht 180mm CP809 8x30mm Diamond 200mm CP973 8x25mm 200mm CP974 8x25mm 200mm CP976 8x30mm 200mm 200mm 190mm 180mm CP1100 CP291 CP998-1 CP x8mm 4x15mm 8x12mm 8x30mm 31

38 Sure-grip tungsten rasp, 210 mm Becker Becker Rees Gorney CP CP1104 CP1105 CP301-4 CP301-5 CP x30mm 7x38mm 7x20mm 7x20mm 7x38mm 7x38mm 7x12mm 5/6 3/4 1/2 3/4 8x22mm 32

39 Nasal splint, cartilage template, crushing press Cartilage crushing press Jost CP x50mm CP814-1 Delivered with tool CP814-3 Nasal splint CP814-3 Aquaplast AQ1728 (D) 75x75mm - Pack 10 Scale 1/2 Cottle (D) Distributed by Integra MicroFrance SAS (France) Toriumi Cartilage template Cartilage template CP x90mm Scale 1/2 33

40 Caliper, Ruler, Lacrimal probe, bone forceps Caliper 20mm Ruler 90mm Bone forceps with teeth Lacrimal probe / / / / / /8 150mm mm CP mm /4 34

41 Rongeur Citelli mm Lempert 190mm mm Straight jaws Friedman 130mm ,5x5mm Curved jaws 35

42 Rongeur Beyer Jansen-Middleton CP380 CP mm 2mm Curved jaws CP380-3 CP CP mm 2mm 4mm 5mm Ruskin 2mm Straight jaws CP mm 4x20mm 36

43 Bone scissors, Bone rongeur Rowland 190mm Ruskin 160mm CP381 Gorney Caplan 200mm mm

44 Septum forceps Scale 1/2 Martin Waksham Asch Jaws large size Jaws small size 230mm mm mm

45 Small scissors, pointed Offret Streiff 105mm 105mm 105mm CP353 CP356 CP16-1 Curved blades CP16 Straight blades Joseph Joseph Fox 120mm 110mm 110mm CP354A Curved blades CP919A Curved blades CP358A Curved blades CP354 Straight blades CP919 Straight blades CP358 Straight blades 39

46 Long scissors, pointed Kilner-jost 120mm CP362 Curved Boetcher Brophy Joseph 180mm CP997 Curved 150mm CP367-1 CP367 Curved Straight 150mm CP355A CP355 Curved Straight 40

47 Small scissors, blunt Shea Stevens Bregeat 120mm CP637 Curved blades 115mm CP922B Curved blades 110mm CP363 Curved blades Stevens Stevens 110mm CP922A Curved blades 110mm CP922 Straight blades 41

48 Long scissors, blunt Ragnell Léger Reynolds 150mm CP Curved Joseph 130mm CP Curved 150mm CP365 Curved 160mm CP921 Curved 150mm CP355C Curved 42

49 Small Metzenbaum scissors Metzenbaum CP351-7 CP mm Curved blades Straight blades Fines blades Tungsten blades 150mm 150mm 150mm CP931-1 Curved blades CP351-3 Curved blades Curved blades CP931 Straight blades CP351-2 Straight blades Delicate blades 43

50 Mayo scissors Mayo Mayo-Stille CP352-1 CP352-3 Mayo 150mm 170mm Curved blades CP352-1 CP352-3 Straight blades CP352 CP mm Scissors, straight sharp blades Mayo-Stille 150mm 170mm Curved blades Straight blades

51 Scissors, serrated blades Becker-Converse 100mm CP1106 Serrated blades Converse 100mm CP348 Fomon Cottle Fomon Cottle-Pech Pellegrini 140mm CP mm CP612 Curved 150mm CP359 Serrated blades 140mm CP mm CP614 45

52 Scissors, serrated blades Heymann-Klossek 170mm CP615-2 Curved left 170mm CP615-3 Curved right 170mm CP615-1 Straight Bebee 180mm CP mm CP mm 713T Angled Wire cutting dural scissors Serrated tungsten blades 46

53 Fine dissecting forceps Dissecting forceps with teeth and plateform Castroviejo 110mm CP938-1 Horizontal teeth and plateform 110mm CP37 Oblique teeth and plateform Dissecting forceps serrated jaws Dissecting forceps with teeth 110mm 120mm 120mm 120mm 120mm 120mm CP332 CP A-12 CP A-12 CP400-1 Jaws 1mm Jaws 1,5mm Jaws 1mm Jaws 1,5mm Jaws 5x5 47

54 Adson dissecting forceps 150mm Adson CP Jaws 1,5mm serrated Adson CP Jaws 1,5mm With teeth Adson-Brown CP Jaws 7x7 120mm Adson-Tubiana Adson Adson-Brown M832 M833 CP604 CP CP606A CP Jaws 1mm Jaws 1mm Jaws 1,5mm Jaws 1,5mm Jaws 1mm Jaws 1,5mm Jaws 7x7 Jaws 7x7 Serrated with teeth serrated with teeth serrated with teeth Tungsten jaws Angled jaws 48

55 Medium dissecting forceps Mac-Indoe 140mm CP934 Oblique teeth Mac-Indoe 140mm CP934-1 serrated Debakey Barraya 150mm 140mm CP A-15 CP A-15 CP CP CP400 Jaws 1mm Jaws 1,5mm Jaws 1mm Jaws 1,5mm Jaws 1,5mm Jaws 3x4 Jaws 5x5 49

56 Medium dissecting forceps Cottle 110mm mm Précelle Barraya Claoué Mac-Indoe 150mm 150mm 150mm 160mm 160mm 170mm CP CP CP401 CP936 2mm 2mm 3x4 5x6 50

57 Dissecting forceps, 180mm Debakey Potts-Smith Barraya 1,5mm 1,5mm 1mm 1,5mm 3mm 1,5mm 6x6 7831A-18 CP CP A CP CP x2 1x2 1x2 3x4 51

58 Dissecting forceps, 200mm Gruenwald-Jansen Debakey 210mm 1mm 2mm 1,5mm 2mm A-20 CP A-20 1x2 52

59 Medium bipolar dissecting forceps Bipolar cables - 4,5 m Magnan CP393-2 Bowa Emc Lamidey Valleylab CP393-3 Erbe Storz Wolf CP393-4 Aesculap Berchtold Martin Adson 110mm 120mm 160mm 200mm CP392-1R CP604BR CP605BR CP392-2R CP392-8R CP392BI CP392BS Jaws 1x8mm Serrated Jaws Jaws with teeth Jaws 1x8mm Jaws 1x8mm Jaws 0,5x5mm Jaws 0,5x5mm 53

60 Medium monopolar dissecting forceps Monopolar cables - 4,5 m CP391E Erbe Storz Wolf CP391M Aesculap Berchtold Martin Erbe T Serie Lamidey CP391V Bowa Emc Lamidey Valleylab Adson 110mm 120mm 160mm CP390-1 CP604M CP605M CP390-2 CP390-8 Jaws 1x8mm Serrated jaws Jaws with teeth Jaws 1x8mm Jaws with teeth 54

61 Tungsten needle-holder Halsey Ryder 130mm 703T 704T Serrated Jaws Smooth jaws 130mm Jaws 1mm Crile-Wood Becker 703T Crile-Wood Mayo-Hégar 702T 150mm 714T 130mm CP1107 Diamond jaws 702T CP

62 Fine haemostatic forceps Hartmann-Mosquito Halsted-Mosquito 95mm Curved Straight without teeth 120mm Curved Straight without teeth Leriche Leriche Halsted 140mm Straight Without teeth 140mm 140mm Curved Straight With teeth With teeth 120mm P761-7 P761-8 Straight Curved With teeth 140mm Curved Without teeth P

63 Medium haemostatic forceps Crile 140mm - Without teeth Curved Straight Kelly 140mm - Without teeth Curved Straight P mm P762-4 Rochester-Péan Kocher P762-2 Kocher Kocher 170mm Straight without teeth Straight with teeth Straight without teeth 165mm 140mm 160mm P764-1 P mm 160mm 180mm P764-3 P764-7 P Curved without teeth P

64 Strong haemostatic forceps Backauss Towel clamp 90mm mm Backauss-Roeder Towel clamp Martel Forceps with teeth "T" tip 130mm mm P Péan Péan Serrated jaws Terrier Serrated jaws Chaput P mm 130mm P P mm P Forceps 2x3 prongs 130mm Allis Forceps with teeth P mm 4x5 prongs mm 3x4 prongs mm 5x6 prongs 58

65 Suction tube with finger control Wertheimer Jankowski Lempert 1,5mm 2mm 2,5mm 3mm 3,5mm 4mm Working length 120mm Working length 120mm Working length 120mm Working length 110mm MCO ,5mm MCEN770J40 4mm MCO ,5mm CP mm MCO ,5mm MCEN770J30 3mm MCO mm CP mm MCO mm MCO mm MCO ,5mm MCO mm MCO ,5mm MCO mm 59

66 Micro suction tube - adapters Luer-lock US Adapter Suction tube adapter with finger control Benezeth MCO775-1 MCO772 Curved and angled suction tube MCO776 1mm MCO1B 1,2mm 1,5mm 1,8mm 2mm 2,5mm 3mm 3,5mm 4mm Curved suction tube Working length 100mm MCO mm MCO mm MCO ,2mm MCO ,5mm MCO ,8mm MCO ,5mm MCO mm MCO ,5mm MCO mm Angled suction tube Working length 140mm MCEN mm MCEN ,5mm 60

67 Blunt suction tube L 120mm "L" Working length MCEN770B25 MCEN770B30 2,5mm 3mm MCEN mm MCEN ,5mm MCEN mm MCEN ,5mm MCEN37D4 4mm L 110mm Malleable MCEN MCEN MCEN MCEN371D35 MCEN371D4 2mm 2,5mm 3mm 3,5mm 4mm L 110mm MCEN MCEN mm 3,5mm Jankowski L 95mm MCEN78J30 3mm n 1 MCEN78J40 4mm n 2 Short curvature Long curvature MCEN79J25 2,5mm n 3 MCEN79J30 3mm n 4 MCEN79J40 4mm n 5 Orsel L 115mm MCEN184 MCEN183 2,5mm 3mm MCEN186 2,5mm L 90mm Short curvature ,5mm mm mm Long curvature ,5mm mm mm 61

68 Nasal snare, trocar Trocar and cannula L 105mm Scale 2/3 "L" Working length Rouvier MCEN mm Ø4mm Albertini L 80mm mm Ø4mm Drain Albertini 7771AS10 (D) 200mm Pack 10 (D) Distributed by Integra MicroFrance SAS (France) Guide for drain L 200mm Albertini 7771B 255mm Nasal snare, snare wire, snare stylet Krause mm Snare wire - Pack Ø 0,30mm Ø 0,40mm Snare stylet Cup forceps L 140mm 210mm MCEN28 double-action jaws 2x5mm 62

69 Dessi rhinnigation Dessi Sterile irrigation tubing MCEN84S (D) Pack 20 MCEN80 (D) Distributed by Integra MicroFrance SAS (France) Scale 2/3 0 MCEN83-C 30 MCEN81-C 45 MCEN87C 70 MCEN82-C MCEN82-C L 150mm Scope sleeve, 4mm diameter "L" Working length Comeg MCEN81O L 140mm Olympus L 140mm 0 MCEN83O MCEN83OL L 125mm for scope WA96200A) 30 MCEN81O MCEN81O1 (WA96201A) MCEN81O2 for scope (WA96202A) 45 MCEN87O3 (WA96203A) MCEN87O4 (WA96204A) 70 MCEN82O MCEN82O5 (WA96205A) MCEN82O6 (WA96206A) 0 MCEN83-S 30 MCEN81-S 45 MCEN87-S 70 MCEN82-S MCEN83-S L 150mm Storz 0 MCEN83-W 25 MCEN81-W 30 MCEN81-W 45 MCEN87W 70 MCEN82-W MCEN83-W L 150mm Wolf 63

70 Displacer elevator, seeker, knot pusher Displacer elevator Double-ended seeker Goldman Pradès 190mm 220mm 190mm 200mm 190mm MCEN55 MCEN Ø 2,3mm Ø 1,2mm Ø 2,3-2,6mm 64

71 Knife elevator Herman Friedrich Rouvier Lérault Dacryocystorhinostomy mm 190mm 180mm 180mm 190mm 150mm MCEN MCEN44 MCEN50 MCEN x5mm 65

72 Cup forceps, Straight jaws 190mm Jankowski L 110mm Scale 2/3 "L" Working length MCEN62T1 MCEN62T2 MCEN62T3 3x8mm 5x11mm 6x11mm Weil-Blakesley Rouvier MCEN62T2 MCEN33 MCEN MCEN4 3x6mm 3x7mm 3mm 3,5mm 3x6mm L 110mm Klossek Aspiration mm L 110mm Rouvier MCEN3 2mm MCEN3 L 160mm Takahashi x10mm 3x10mm 4x10mm L 110mm Blakesley x5mm

73 Cup forceps, 45 jaws Scale 2/3 "L" Working length L 110mm Jankowski MCEN62A1 MCEN62A2 MCEN62A3 3x8mm 5x11mm 6x11mm Weil-Blakesley Rouvier MCEN62A2 MCEN34 MCEN91 MCEN91B 7762A A-2 MCEN5 MCEN5B 3x6mm 3x7mm 3x10mm 3mm 3,5mm 3x6mm 3x12mm L 110mm Aspiration Klossek 7762A-5 3mm 7762A-5 L 110mm Blakesley x5mm

74 Cup forceps, 90 jaws L 110mm Scale 2/3 "L" Working length Jankowski Weil-Blakesley MCEN62B1 MCEN62B2 MCEN62B3 7762B-1 3x8mm 5x11mm 6x11mm 3mm MCEN62B2 L 110mm Jankowski 7762A4 4x17mm 7762A4 L 125mm Dessi MCEN61 3mm MCEN61 68

75 Fine cup forceps, curved Scale 2/3 Rouvier L 130mm "L" Working length MCEN29 2x5mm 45 L 120mm MCEN29 MCEN35 MCEN36 2x4mm MCEN35 Peynègre-Bossard L 160mm MCEN53 2x4mm MCEN53 Peynègre L 140mm MCEN99 3x4mm MCEN99 69

76 Cup forceps curved down Scale 2/3 L 70mm "L" Working length Orsel MCEN68 3x4,5mm MCEN68 Heuwieser L 130mm L 130mm Skinner Horizontal opening Vertical opening mm

77 Cup forceps curved up Scale 2/3 "L" Working length L 130mm 70 Vertical opening mm 3mm Horizontal opening L 100mm Jankowski 70 Vertical opening MCEN350H 2x4mm Horizontal opening MCEN350V MCEN350H Jankowski L 90mm 100 Vertical opening MCEN360H 2x4mm Horizontal opening MCEN360V MCEN360V 71

78 Cup forceps pear jaws Jankowski L 90mm Scale 2/3 "L" Working length 80 MCEN960H 80 MCEN960H L 95mm 55 MCEN96 MCEN97 Right 55 Left MCEN96 L 130mm

79 Punch forceps Scale 2/3 Terrier L 100mm "L" Working length MCEN27-1 3x6mm Terrier MCEN27-2 2x4mm L 120mm MCEN27-1 MCEN27 4x7mm Terrier L 100mm MCEN27 MCEN27-3 2x4mm MCEN27-3 L 100mm MCEN27R 2,5x7mm L 100mm MCEN27R x3,5mm

80 Punch forceps Joséphine Terrier L 120mm Scale 2/3 "L" Working length MCEN960H Left opening MCEN38 Rouvier L 100mm MCEN49 4mm - 30 MCEN49 L 100mm ,5x5mm 3,5x5mm Left opening Right opening

81 Punch forceps Scale 2/3 "L" Working length L 100mm Blakesley mm ,5mm ,5mm Blakesley L 100mm mm ,5mm ,5mm Weil-Blakesley L 100mm ,5mm ,5mm mm L 100mm Weil-Blakesley ,5mm ,5mm mm

82 Fine punch forceps Struycken L 115mm Scale 2/3 "L" Working length MCEN65 1,5mm MCEN66 1,5mm L 110mm MCEN65 MCEN66 Struycken 90 L 90mm MCEN67 MCEN67 MCEN67-1 MCEN67-2 1,5mm Jaws right Jaws left Lusk L 125mm MCEN73 MCEN74 MCEN MCEN73 2,7mm Struycken L 100mm x15mm

83 Punch rongeur forceps Scale 2/3 "L" Working length Citelli-Peynègre MCEN98 L 130mm MCEN98 3mm Citelli-Frèche L 110mm MCEN12 MCEN12 4mm - 45 Hajek-Kofler L 150mm x7mm McKenty L 125mm x5,5mm

84 Micro scissors, serrated blades Jankowski L 110mm Scale 2/3 "L" Working length MCEN41J Ttitanium - 15mm MCEN41J MCEN42J MCEN42J1 Straight Curved left Curved right Dessi L 120mm MCEN41D3 MCEN41D3 10mm Peynègre L 100mm MCEN41-1 MCEN mm Rouvier 10mm L 100mm MCEN42 MCEN42 Curved left MCEN42-1 Curved right 78

85 Micro clip applier Scale 1/2 L 110mm "L" Working length MCEN21 MCEN21 Clip LT200 L 120mm MCEN21R MCEN21R Clip LT200 Wormald 45 L 180mm MCEN211 MCEN211 Clip LT200 MCEN211S Clip LT100 Wormald L 180mm MCEN212 Clip LT200 MCEN212S MCEN212S Clip LT100 Wormald 45 L 170mm MCEN213S MCEN213 Clip LT200 MCEN213S Clip LT100 79

86 Micro bipolar forceps Micro bipolar forceps standard Dessi L 120mm Scale 1/2 "L" Working length MCEN54 Dismantled micro bipolar forceps Dessi L 120mm Dismantled Insert Tube Handle MCEN54P MCEN54I MCEN54G MCEN54P Other compositions MCEN54H MCEN54G MCEN54P Handle + Tube + Insert MCEN54H MCEN54G CEV669BG Handles MCEN54I MCEN54G CEV669BG MCEN54G Tube CEV669BG MCEN54I Insert MCEN54H Insert Bipolar cables m CP393-2 Bowa Emc Lamidey Valleylab MCEN640 Container 270x160x35mm CP393-3 Erbe Storz Wolf CP393-4 Aesculap Berchtold Martin 80

87 Micro bipolar forceps with suction Scale 1/2 Wormald L 120mm "L" Working length MCEN64 Wormald L 170mm MCEN641 Wormald L 170mm MCEN643 MCEN644 Pack 5 Disposable suction tip, sterile Bipolar cables m CP393-2 Bowa Emc Lamidey Valleylab MCEN640 Container 270x160x35mm CP393-3 Erbe Storz Wolf CP393-4 Aesculap Berchtold Martin 81

88 Micro monopolar instruments Hook Frèche 90 L 70mm Scale 1/2 "L" Working length 200mm MCEN101 Herman 90-5mm L 125mm 245mm MCEN128 Suction tube elevator L 65mm Appelbaum Ø2mm 170mm MCEN730 Suction tube with finger control Frèche MCEN mm MCEN ,5mm MCEN mm L 145mm 200mm MCEN Lancet knife L 140mm Monopolar cables - 4,5 m Frèche 260mm MCEN105 CP391E Erbe Storz Wolf Pick L 110mm Rouvier 220mm MCEN11 L 110mm CP391M Aesculap Berchtold Martin Erbe T Serie Lamidey Rouvier 220mm MCEN102 suction CP391V Bowa Emc Lamidey Valleylab 82

89 Lemoine, Klossek, Kennedy instruments Drill with adjustable thrust Hand drill 7776 (D) Scale 1/ mm Ø 2mm "L" Working length Nails Lemoine 7778 L 15mm L 10mm (D) Distributed by Integra MicroFrance SAS (France) Scale 1/1 Klossek 7778K L 15mm 7778K1 L 10mm Kennedy instruments - 150mm Kennedy Scale 1/1 L 105mm Malleable Palpation probe MCSK1 Sharp knife MCSK2 Blunt hook - 90 MCSK3 Crochet mousse MCSK4 Curette - 1mm MCSK6 Suction tube - 2mm MCSK5 Container MCSK0SC 180x100x15mm - 200x100x25mm 83

90 Vaughan Instruments Knife and suction tube, suction tube L 105mm Scale 1/2 "L" Working length MCEN113 Knife and suction tube - 205mm Suction tube - 210mm MCEN111 MCEN112 MCEN120 MCEN113 4mm mm mm mm - 90 Thru-flow suction cup forceps L 120mm Suction tube with finger control, 170mm L 130mm Malleable MCEN115-8 MCEN114 2mm 45 MCEN115-6 MCEN115-8 MCEN mm 2,5mm 3mm Cleaning device Cutting punch circular 60 L 125mm MCEN110 Cleaning device for cutting punch circular 4 > 4mm 6 > 6mm MCEN117 4mm L 115mm 235mm MCEN117 MCEN116 4mm MCEN118 6mm 225mm MCEN116 84

91 Parson Instruments Scale 2/3 Blunt suction tube "L" Working length L 90mm 150mm MCEN766 MCEN767 Ø 3mm Ø 4mm L 110mm Suction curette with finger control 150mm - Ø 3,5mm MCEN768 MCEN769 Curette 90 Curette mm - Ø 3,5mm MCEN764 sharp MCEN765 blunt L 80mm Suction tube elevator with finger control Double knife 190mm L 50mm 12mm MCEN720 double knife 12mm L 50mm 240mm L 70mm 10mm MCEN760 10mm 240mm MCEN761 7mm L 70mm 7mm 195mm MCEN721 2,3mm Double-ended probe L 55mm 190mm MCEN723 L 55mm 2,3mm 245mm MCEN mm MCEN763 L 77mm L 75mm container Not shown 85

92 Duncavage Instruments Angled palpation probe L 130mm Scale 2/3 "L" Working length MCEN mm Angled elevator L 130mm MCEN mm Suction tube L 130mm MCEN mm Ø 2mm Angled suction tube elevator L 130mm MCEN mm Ø 2mm Cup forceps L 125mm Curved down MCEN151 Vertical opening MCEN152 Horizontal opening Through-cutting forceps MCEN153 Vertical opening MCEN154 Horizontal opening MCEN153 86

93 Levine orbital instrumentation Scale 2/3 Loop, Knife, suction curette with finger control L 105mm "L" Working length Ø 2,3mm 210mm - Ø 3mm MCEN165 Loop Knife and suction tube Suction curette with finger control MCEN161 MCEN163 MCEN164 MCEN165 MCEN167 L 120mm Curved sickle knife, knife, loop with curved shaft 225mm MCEN168 Knife Sickle knife Loop 90 Curved 70 MCEN162 MCEN168 MCEN mm 225mm 250mm Perforator Double-ended perforator elevator 250mm MCEN171 Elevator Forceps, serrated jaws Container & rack MCOS10SC 385x256x128mm Photos for illustration purposes, unscaled L 115mm Forceps serrated Jaws 3x12mm MCEN169 MCEN169 87

94 Wormald frontal instrumentation Malleable probe double-ended, suction tube, suction tube elevator, loop L 90mm L 90mm Scale 2/3 "L" Working length Malleable Malleable malleable probe double-ended mm Straight Malleable with MCEN149W MCEN130 Malleable with MCEN149W Bending tool MCEN149W 150mm L 110mm Malleable 220mm MCEN131 Suction tube with finger control Suction tube elevator with finger control Blunt loop 220mm 215mm 215mm Ø2mm Mousse Ø2,3mm MCEN131 MCEN133 MCEN134 Knot pusher L 90mm 200mm MCEN135 Frontal sinus sterilization case Plastic sterilization case MCEN136SC 90x175x55mm - 270x160x35mm Photos for illustration purposes, unscaled 88

95 Wormald skull base instrumentation Scale 1/2 Palpation probe, suction tube, suction curette, suction basket, suction tube elevator "L" Working length Palpation probe - 270mm L 170mm Malleable 270mm MCEN139A 90 Straight MCEN139 MCEN139A Bending tool MCEN149W 150mm Suction tube with finger control L 170mm Malleable Suction curette with finger control Suction basket Suction tube elevator 280mm MCEN142 Ø 3,5mm Ø 2mm Ø 2,5mm Ø 2,5mm Ø 2,5mm Ø 2,5mm Ø2,5mm Ø2,5mm malleable malleable 4x5mm 5x6mm 4x5mm 5x6mm MCEN138 MCEN138S MCEN140 MCEN140A MCEN141 MCEN141A MCEN142 MCEN147 L 165mm Micro scissors, micro forceps, container Scissors Straight Curved left Curved right Angled up MCEN217R Woo Wormald Wormald Wormald Wormald Wormald Woo Wormald 260mm 230mm 230mm 230mm 230mm 230mm 260mm 230mm 5mm 8mm 5mm 8mm 5mm 8mm 5mm 8mm MCLW10 MCEN217S MCEN216L MCEN217L MCEN216R MCEN217R MCLW11 MCEN217U Forceps curette jaws - 230mm Container & rack MCEN x250x140mm Straight jaws jaws 45 1,5x3,5mm 1,5x3,5mm MCEN214 MCEN215 Photos for illustration purposes, unscaled 89

96 Wormald skull base instrumentation Tungsten needle-holder Scale 1/2 L 170mm "L" Working length MCEN218 Tungsten Vascular clamp L 170mm MCEN191 MCEN191 L 170mm MCEN192 L 165mm L 170mm MCEN193 MCEN190 MCEN193 MCEN194 MCEN195 Straight Straight 45 Curved 45 Curved 45 90

97 Stamm skull base instrumentation Scale 1/2 "L" Working length L 150mm Malleable Blunt suction tube 210mm MCEN349 L 140mm Ø 2mm Ø 1,5mm Ø 2mm MCEN347 MCEN348 MCEN mm MCEN350 MCEN350 angled down Suction tube, angulated, curved MCEN351 angled up Micro hook, ball seeker, elevator L 160mm 230mm MCEN345 Micro crochet Dissecteur boule Micro décolleur Ø 1,5mm Ø 3mm Ø 2mm Ø 4mm MCEN329 MCEN330 MCEN345 MCEN346 L 150mm Curette cup forceps, Scissors, bipolar forceps Cup forceps Straight MCEN328S angled up MCEN328U 280mm MCEN328U Ciseaux 5mm - Straight 5mm mm - Curved MCEN344S MCEN344U MCEN344V 280mm MCEN344U Bipolar forceps L 140mm 45-1x5mm bayonet jaws MCEN364 MCEN mm MCEN365 Bipolar cables - 4,5 m CP393-2 Bowa Emc Lamidey Valleylab CP393-3 Erbe Storz Wolf CP393-4 Aesculap Berchtold Martin Container & rack MCOS10SC 385x256x128mm Photos for illustration purposes, unscaled 91

98 Sterilization case, tray, cup, Surgical oil Cup (D) 60mm (D) 80mm Scale 1/ (D) 100mm (D) 120mm (D) 160mm Stainless steel tray (D) 240x180mm Scale 1/4 Surgical instrument oil MCO731 (D) Stainless steel sterilization case Scale 1/5 7874MF x105x45mm 220x100x40mm 7874MF x155x65mm 250x150x60mm 7874MF x205x85mm 340x200x80mm 7874MF x205x95mm - 400x200x90mm (D) Distributed by Integra MicroFrance SAS (France) 92

99 PLastic sterilization case Scale 1/5 Wormald Selesnick MCEN136SC 290x175x55mm 270x160x35mm x255x74mm Toriumi MCOS10SC 385x256x128mm x250x28mm x250x123mm x250x140mm x255x140mm 93

100 Numerical index IG (D) LI (D) IG (D) I (D) , T T T T T MF C MF A (D) B (D) B B BC BC BC C C C A A A A B , AS10 (D) B (D) K K MF MF MF MF-5CC A A A A A A A A (D) MF MF MF MF (D) (D) (D) (D) (D) (D) Distributed by Integra MicroFrance SAS (France) 94

101 Numerical index , (D)...9 A AQ1728 (D) C CEV669BG...80 CEV CEV CP CP CP CP CP CP CP CP21A CP CP CP CP CP23A CP CP CP CP , 31, 32 CP CP CP CP CP CP CP CP CP CP CP CP304B CP304B CP304B CP304B CP304B CP304B CP CP305L CP305R CP CP CP CP CP CP CP CP310D...15 CP310E...15 CP CP CP CP315D CP315G CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP344A...15 CP344AT...15 CP344B...15 CP344BT...15 CP344C...15 CP344CT...15 CP344D...15 CP344DT...15 CP344E...15 CP344ET...15 CP CP CP CP CP CP CP CP CP CP CP CP CP CP354A...39 CP CP355A...40 CP355C...42 CP CP CP358A...39 CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP391E...54, 82 CP391M...54, 82 CP391V...54, 82 CP392-1R CP392-2R CP392-8R CP392BI CP392BS CP , 80, 81, 91 CP , 80, 81, 91 CP , 80, 81, 91 CP , 51 CP CP CP CP CP CP CP CP CP CP604BR CP604M...54 CP CP CP605BR CP605M...54 CP CP CP606A...48 CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP624LF CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP821B CP821C CP821D CP821E CP CP CP CP CP CP CP CP CP919A...39 CP CP CP922A CP922B CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP975A...31 CP CP CP CP CP CP CP CP CP CP CP CP CP CP CP M M M MCEN MCEN MCEN MCEN5B MCEN MCEN MCEN MCEN MCEN MCEN21R...79 MCEN MCEN MCEN MCEN MCEN MCEN MCEN27R MCEN (D) Distributed by Integra MicroFrance SAS (France) 95

102 Numerical index MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN37D MCEN MCEN MCEN MCEN41D MCEN41J MCEN MCEN42J MCEN42J MCEN MCEN MCEN MCEN MCEN MCEN54G...80 MCEN54H...80 MCEN54I...80 MCEN54P...80 MCEN MCEN MCEN62A MCEN62A MCEN62A MCEN62B MCEN62B MCEN62B MCEN62T MCEN62T MCEN62T MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN78J MCEN78J MCEN79J MCEN79J MCEN79J MCEN MCEN81-C MCEN81O MCEN81O MCEN81O MCEN81-S MCEN81-W MCEN82-C MCEN82O MCEN82O MCEN82O MCEN82-S MCEN82-W MCEN83-C MCEN83O MCEN83OL MCEN83-S MCEN83-W MCEN84S (D) MCEN87C MCEN87O MCEN87O MCEN87-S MCEN87W MCEN MCEN MCEN91B MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN136SC...88, 93 MCEN MCEN138S...89 MCEN MCEN139A...89 MCEN MCEN140A...89 MCEN MCEN141A...89 MCEN MCEN MCEN MCEN149W...88, 89 MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN211S...79 MCEN MCEN212S...79 MCEN MCEN213S...79 MCEN MCEN MCEN216L...89 MCEN216R...89 MCEN217L...89 MCEN217R...89 MCEN217S...89 MCEN217U...89 MCEN MCEN328S MCEN328U MCEN MCEN MCEN344S MCEN344U MCEN344V MCEN MCEN MCEN MCEN MCEN MCEN MCEN350H...71 MCEN350V...71 MCEN MCEN360H...71 MCEN360V...71 MCEN MCEN MCEN371D MCEN371D MCEN , 81 MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN MCEN770B MCEN770B MCEN770J MCEN770J MCEN960H... 72, 74 MCL38N (D)... 5 MCL MCL170 (D)(1)... 5 MCL171 (D)(1)... 5 MCL173 (D)(1)... 5 MCL174 (D)(1)... 5 MCL197 (D)(1)... 5 MCLW MCLW MCO1B MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO731 (D)...92 MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO MCO805A... 3 MCO MCO MCO MCO978S...6 MCO MCO MCO MCO981D...6 (D) Distributed by Integra MicroFrance SAS (France) (1) Not a MEDICAL DEVICE 96

103 Numerical index MCO MCO MCO MCO MCOS10SC. 87, 91, 93 MCSK0SC...83 MCSK MCSK MCSK MCSK MCSK MCSK P P P P P P P P P P P P P P S SCP337A...11 SM63 (D) SM64 (D) SM65 (D) (D) Distributed by Integra MicroFrance SAS (France) 97

104 Integra MicroFrance Integra ENT - Nose catalogue Manufacturers : Integra MicroFrance SAS (France) Le Pavillon i Saint Aubin le Monial i France HEMODIA SAS 85, rue du Chêne Vert LABEGE i France Unimed SA Rue du Grand-Pré Lausanne i Suisse Medtronic Xomed 6743 Southpoint Drive N. Jacksonville Florida USA EC REP Marquat Génie Biomédical P.A. de la Haie Griselle 9 rue du 8 mai 1945 i B.P Boissy-St-Léger i France Swann Morton Ltd Penn Works i Owlerton Green i Sheffield South Yorkshire S6 2BJ i Royaume Uni Medtronic B.V. Earl Bakkenstraat PJ Heerlen The Netherlands Manufacturers with CE class I products only : Agencinox Zone Industrielle Aillant sur Tholon i France Chemische Fabrik Dr. Weigert GmbH & Co. Mühlenhagen D Hamburg i Allemagne Concorde Import Export B.P Levallois-Perret i France Medicon eg Gaensaecker 15 D Tuttlingen i Allemagne Qfix 440 Church Road Avondale i PA USA Sunoptic Technologies 6018 Bowdendale Avenue Jacksonville i Florida USA EC REP Medical devis & QA Services Ltd 76, Stockport Road i Timperley Cheshire i WA15 75N i Royaume Uni EC REP RMS - UK Limited 28 Trinity Road i Nailsea Sommerset BS48 4NU i Royaume Uni Availability of these products might vary from a given country or region to another, as a result of specific local regulatory approval or clearance requirements for sale in such country or region. n Please read carefully the instructions for use. n Non contractual document. The manufacturer reserves the right, without prior notice, to modify the products in order to improve their quality. n Warning: Applicable laws restrict these products to sale by or on the order of a physician. Additional information for EMEA Customers only : Products mentioned in this document are CE class I or IIa devices. Contact Integra should you need any additional information on devices classification. All the medical devices mentioned on this document are CE marked according to European council directive 93/42/EEC on medical devices and its relatives. References that are not medical devices are identified with the indication NOT A MEDICAL DEVICE. Products marked with the symbol (D) are distributed by Integra MicroFrance SAS (France) Date of last révision : 06/2015 For more information, please contact customer service : Europe, Middle-East, Africa France / International : +33 (0) i +33 (0) (Fax) i microfrance@integralife.com United Kingdom : +44 (0) i +44 (0) (Fax) i custsvcuk@integralife.com Germany : +49 (0) i +49 (0) (Fax) i custsvcgermany@integralife.com Benelux: +32 (0) i +32 (0) (Fax) i custsvcbenelux@integralife.com integralife.eu/contact Integra and the Integra logo are registered trademarks of Integra LifeSciences Corporation or its subsidiaries in the United States and/or other countries. MicroFrance is a trademark of Integra LifeSciences Corporation or its subsidiaries. All other trademarks and product names are the property of their respective owners Integra LifeSciences Corporation. All rights reserved. Printed in France EN