BASE AND COVER 28 TAPE TYPING UNIT AND 28 TAPE TELETYPEWRITER LUBRICATION P BASE AND SECTION P AT&TCo Standard
|
|
- Osborn Conley
- 6 years ago
- Views:
Transcription
1 Aerican Te!ephone and Telegraph Copany Printed in U. S. A. BELL SYSTEM PRACTICES Teletypewriter and Data Stations SECTION P Issue 2, May, 1962 AT&TCo Standard 28 TAPE TYPING UNIT AND 28 TAPE TELETYPEWRITER BASE AND COVER LUBRICATION CONTENTS PAR. NO. 1. GENERAL LUBRICATION DETAILS A. 28 Tape Teletypewriter Base B. 28 Tape Typing Unit C. 28 Tape Teletypewriter Cover ASSOCIATED BELL SYSTEM PRACTICES GENERAL 1.01 This section contains the specific lubrication procedures for the 28 tape typing unit and the 28 tape teletypewriter base and cover. The inforation herein, together with that in the general lubrication section and the other lubrication sections referred to in this practice, provides for the coplete lubrication of the apparatus This section is reissued to reove certain lubrication inforation already contained in associated Bell Syste Practices and to bring the section.generally up to date. Since this revision includes a general rearrangeent of the aterial, arginal arrows ordinarily used to indicate changes have been oitted The apparatus should be lubricated before being placed in service, as specified in the section covering the preparation of teletypewriter apparatus for installation. After a few weeks in service, it should be relubricated to ake certain that all specified parts and areas have lubricant. Thereafter, because 28 TAPE TYPING UNIT AND 28 TAPE TELETYPE WRITER P BASE AND Page 1 COVER
2 of varying conditions at each station, the apparatus should be lubricated as often as specified by local instructions The lubricants to be used and their ethods of application are the sae as those in the general lubrication section Certain areas that receive lubricant are illustrated in Part 2 of this section. Instructions that accopany the drawings consist of an abbreviated direction (lubrication sybol), the specific area (e.g., pivot), and the part (e.g., key). The following are the lubrication sybols and their eaning as used in this section : Sybol 0 02 s G Apply 1 drop of oil Apply 2 drops of oil Saturate with oil Meaning Apply a thin fil of grease (see note) Note: In addition to the preceding directions and the general lubrication instructions, a thick coat of grease should be applied to all gears Tape Teletypewriter Base: Since this base is essentially the 28 typing reperforator base of the keyboard send-receive design with odifications to accoodate the 28 tape typing unit, ost of the lubrication procedures are the sae for both bases. These coon procedures are listed in Part 2 of this section, which also contains the lubrication directions peculiar to the 28 tape teletypewriter base Tape Typing Unit: Since this unit is essentially the 28 single-agnet typing reperforator without the tape perforating echanis and with a odification of the tape guide and tape-feed echaniss, ost of the lubrication procedures for the 28 tape typing unit are the sae as those for the siilar 28 typing reperforator. These coon procedures are listed in Part 2 of this section, which also contains those lubrication directions peculiar to the 28 tape typing unit Tape Teletypewriter Cover: The cover should be lubricated in accordance with the procedures shown in the applicable illustrations in Part 2 of this section. I I
3 LUBRICATION DETAILS A. 28 Tape Teletypewriter Base 2.01 The following echaniss should be lubricated as specified for the base of the keyboard send-receive design in the Bell Syste Practice containing the lubrication procedures for the 28 typing reperforator base (KSR and RO). (I) Spacebar Mechanis (2) Keylever Mechanis (3) Break Lever Mechanis (4) Codelever Mechanis (5) Codebar and Lockbar Mechaniss (6) Nonrepeat Lever Mechanis (7) Contact Box (8) Transfer Bail Mechanis (9) Transfer Lever Mechanis (10) Function Clutch Mechanis (11) Local Tape Feedout Mechanis (12) Shaft Mechanis (13) Universal Bail Latchlever (14) Locking Bail Mechanis (15) Codebar Bail Mechanis (16) Codelever Universal Bail Mechanis (17) Lockbar Latch Mechanis. (18) Electrical Line Break Mechanis (19) Tape-out Switch Mechanis (20) Character Counter Mechanis 2.02 In addition to the echaniss listed in 2.01, the parts illustrated in 2.03 to 2.05, inclusive, should be lubricated as indicated therein. 28 TAPE TYPING UNIT AND 28 TAPE TELETYPE WRITER P BASE AND PMe 3 COVER
4 2.03 Speed-shift Mechanis and Gears I r=r===l!==/ I G TEETH GEARS - - I SAT FELT WASHERS SPEED SHIFT MECHANISM!' f'=>i G TEETH GEARS G TEETH GEARS :j
5 Vl -o 0 Vl :r:..,., --< r- z A )> Cl 28 TAPE TYPING UNIT AND 28 TAPE TELETYPE WRITER P BASE AND "---: COVER 0 Vl -o 0 Vl..,., --<!:: z A )> Cl...
6 2.05 Speed-indicator Shaft, Speed-shift Linkage, and Gears 0 FLANGED SLEEVE SPEED SHIFT LINKAGE G TEETH GEARS" FELT WASHERS SPEED SHIFT LINKAGE 0 PIVOT POINTS SPEED SHIFT LINKAGE 0 BEARING POINT SPEED INDICATOR SHAFT & I I
7 w w B. 28 Tape Typing Unit 2.06 The following echaniss should be lubricated in accordance with the Bell Syste Practice containing the lubrication procedures for the 28 single-agnet typing reperforator. (1) Ribbon-feed Mechanis (2) Rotary-positioning Mechanis (3) Selecting Mechanis (4) Range Finder Mechanis (5) Transfer Mechanis (6) Pushbars (7) Main Shaft Mechanis (8) Function Box Mechanis (9) Axial-positioning Mechanis (10) Detent Asseblies (11) Printing Mechanis (12) Rocker Bail Mechanis (13) Function Ca-clutch Trip Mechanis (14) Main Shaft and Jack Shaft Mechaniss 2.07 In addition to the echaniss listed in 2.06, the tapefeed echanis should be lubricated as indicated in TAPE TYPING UNIT AND 28 TAPE TELETYPE WRITER P BASE AND Page 7 COVER
8 I I I I, )> ""0 rn s rn n :r )> z
9 .,.,.,. C. 28 Tape Teletypewriter Cover 2.09 Locking Mechaniss and Door Hinge and Latches ACCES5 DOOR LATCHES PIVOT POINTS ACCESS DOOR HINGE LATCHING SURFACES LOCKING MECHANISMS IN SUB-BASE PIVOT POINTS G LATCHING AND SLIDING SURFACES 28 TAPE TYPING UNIT AND 28 TAPE TELETYPE WRITER P34.5Q9 BASE AND Page 9 COVER
10 I I Page Pages 3. ASSOCIATED BELL SYSTEM PRACTICES 3.01 The following Bell Syste Practice provides additional inforation that ay be required in connection with this section. Subject Alphabetical Index of 28-type Equipent, Bell Syste Practices, and Associated 28 ASR Station Drawings Section P34.001
Development of a Meat Slicing Machine Using Locally Sourced Materials
International Journal of Engineering and Technology Volue No., February, 01 Developent of a Meat Slicing Machine Using Locally Sourced Materials Odior, A. O. Departent of Production Engineering, University
More information4137~- 4&2---e $ 1& ~/' ... ,., '23 ,...,, 1646' ( '2 ) 2'27
SINGER. 460/22 -Jl. ::-: : 18666 g- l!- 8'146'2-8230 6 ',,.,., 61 023 I : I - I., v 4137-4&2---e. _, 82215. 122.,.{J 8'12., 8227JI OO I.,,, ' *' -ocu 12'271, 1326U.. IG401S 140396--ii' $ 1&-46 ---/'.,
More informationLIEBHERR Mobile Crane LTM
LIEBHERR Mobile Crane echnical Data LIEBHERR Contact: Gerry Coughlin M: +64 27 272 6395 E: gerry@craneworksnz.co.nz W: craneworksnz.co.nz Freephone 0800 420 022 R1 = 4900 R = 33 Diensions 915 520 30 2545
More informationParts Lists. Parts List Index. Using the Parts Lists
Parts Lists Parts List Index PL 1.1 Covers (1 of 2).............. 7-2 PL 9.1 Frame and Size Sensor....... 7-22 PL 1.2 Covers (2 of 2).............. 7-4 PL 10.1 Electrical................. 7-24 PL 2.1 Tray
More informationHow to operate TC-38A
How to operate TC-38A 1. Installation 1 Support connection: Referring to the cover page of this INSTRUCTION MANUAL, fasten two small wrench bolts in backside by 6mm-wrench and fasten three large bolts
More informationRM 2125 Troubleshooting Guide
Problems, possible causes and corrective action Problem Cause Corrective Action 1) Thick and Thin Sections. a) Partial Sections b) Shorter Sections in ribbon c) Section thickness varies from one section
More informationSERVICE SHEET 34" WALK-BEHIND POWER TROWEL MODEL FT34 (THIS SERVICE SHEET APPLIES TO THE TROWELS WITH SERIAL NUMBER AND AFTER) WARNING
34" WALK-BEHIND POWER TROWEL (THIS APPLIES TO THE TROWELS WITH SERIAL NUMBER 0837 AND AFTER) WARNING To reduce the risk of injury, all operators and maintenance personnel must read and understand these
More informationSEWING; EMBROIDERING; TUFTING
XXXX D05 SEWING; EMBROIDERING; TUFTING XXXX SEWING (appliances for the tailoring trade A41H; sewing tables A47B 29/00; sewing in bookbinding B42B 2/00; sewing machines modified for knitting D04B 39/08)
More informationI N ST R UC T I ON MODELS 1612E, 1712E & 1712RE SLICERS. FORM Rev. B (10-97) 1712RE 701 S. RIDGE AVENUE TROY, OHIO 45374
I N ST R UC 1712E T I ON MODELS 1612E, 1712E & 1712RE SLICERS S ML-104546 ML-104547 ML-104548 1612E 1712E 1712RE 701 S. RIDGE AVENUE TROY, OHIO 45374 FORM 19238 Rev. B (10-97) TABLE OF CONTENTS GENERAL......................................................................
More informationINSTRUCTION MANUAL HYDM140
INSTRUCTION MANUAL HYDM140 INSTRUCTION MANUAL Clean-Cuts HYDM140 Hydraulic Hose Saw Table of Contents Introduction... 3 Old Method... 3 New Clean-Cuts Method... 3 Operation... 4 Operation Procedure...
More informationPARTS BOOK CATALOG SIDE HD FLAIL HEADS TRACTOR MID-MOUNT
PARTS BOOK CATALOG SIDE HD FLAIL HEADS TRACTOR MID-MOUNT DIAMOND MOWERS, Inc. 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE
More informationBerkeley Cast Iron Impeller B4EYRMBH BEARING FRAME MOUNT. Flanged Case, Packing Construction. Table I
Cast Iron Flanged, Packing Construction B4EYRMBH Page 0. Date March 4, 03 Supersedes /0/09 9 3 3 8 8 B/M B53 CW M L034.88" 3C 5 8 3B 80 A 3A 3 See Supplement B 9 3, See See Shaft (Not sold separately)
More information2,861,685 LITTER REMOVER FOR AUTOMATIC POULTRY FEEDER Filed May 24, 1954
Nov. 25, 1958 N. CORDIS 2,861,685 Filed May 24, 1954 3. Sheets-Sheet S BY INVENTOR Waf Cordis éesia. Séreo, A77OAVAY Nov. 25, 1958 N. CORDIs 2,861,685 Filed May 24, 1954 3. Sheets-Sheet 2 SEEEEEE-F5 4.
More informationUSER S OPERATING AND INSTRUCTION MANUAL
Grand Rapids, Michigan, U.S.A. 49504-5298 USER S OPERATING AND INSTRUCTION MANUAL MODEL 709 MINI SUPREME BREAD SLICER 0709S20000-CV INDEX SAFETY INSTRUCTIONS... 0709S20025 DEFINITIONS... GEN 931118 INSTALLATION
More informationEaton ET Hydraulic Hose Saw INSTRUCTION MANUAL
Eaton ET9200-10-220 Hydraulic Hose Saw INSTRUCTION MANUAL INSTRUCTION MANUAL Eaton ET9200-10-220 Hydraulic Hose Saw Table of Contents Introduction... 3 Old Method... 3 New Eaton Method... 3 Operation...
More information1612P MODEL 1612P SLICER MODEL EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO FORM (4-95)
1612P MODEL 1612P SLICER MODEL 1612P ML-104587 EXECUTIVE OFFICES 701 RIDGE AVENUE TROY, OHIO 45374-0001 FORM 19370 (4-95) Installation, Operation, and Care of MODEL 1612P SLICER SAVE THESE INSTRUCTIONS
More informationParts Catalog EVM/EVM2/EVM3 REPAIR PARTS CATALOG NO. M50206(V)
EVM/EVM2/EVM3 REPAIR PARTS CATALOG NO. ISSUED APRIL 2016 ORDERS Please use Part Numbers when ordering and include the machine Serial Number (found on the electrical data plate) to insure that you will
More informationThomas Scientific Swedesboro, NJ U.S.A.
Thomas Scientific Swedesboro, NJ 08085-0099 U.S.A. Wiley Laboratory Mill, Model 4 3375-E10 (115 V, 50/60 HZ) USE AND CARE OF CATALOG NUMBER: 3375-E10 Wiley Laboratory Mill, Model 4 (115 V, 50/60 HZ) UNPACKING
More informationMax 500+ Series. Quick Start Guide FREE RECIPES. System Settings Venting Methods Initial Test Run Smart Programs.
Series Quick Guide 500+ FREE RECIPES Syste Settings Methods Initial Test Run Sart Progras www.instantpot.co Syste Settings WARNING Read all Iportant Safeguards outlined within the anual before using the
More informationPRODUCT MANUAL - M096
PRODUCT MANUAL - M096 MODEL 270 ELECTRIC CAN OPENER 1 I. LABELS L087--CAUTION 2 II. SPECIFICATIONS MODEL NO. 270 POWER 115 VOLT, 1.5 AMP, 50-60HZ REQUIREMENTS 230 VOLT, 0.8 AMP, 50-60 HZ NORMAL SPEED 200-250
More informationExploded views meat slicer: 800S. DEKO Holland bv B Arnhem The Netherlands
Exploded views meat slicer: 800S DEKO Holland bv. 6827 B Arnhem The Netherlands DEKO Holland bv. Recommended spare parts list Part no. Description 260-07/ 260-08/ 260-5 Switch 230 Volt / Switch 400 Volt
More informationNS 200 Series Hose Reel January 2011
Instructions Parts List Service Manual NS 200 Series Hose Reel January 2011 Suitable for dispensing, transfer and evacuation of lubricants, fuels, air & other automotive & industrial products. To be used
More informationAerospace. Light Weight and Flexible Qualified to Industry Standards. Fluid Conveyance
Aerospace Fluid Conveyance Aeroquip Brand Rubber Hose, & Assemblies for Aerospace Applications Light and Flexible Qualified to Industry Standards 303, 302A Medium Pressure Hose,, and Assemblies Construction:
More informationSpecial conveyor chains
Special conveyor chains I iwis offers an extensive progra of special chains for various industrial applications and requireents. While the plate chain is being used wherever sooth and reliable conveying
More informationOWNER S TECHNICAL MANUAL
OWNER S TECHNICAL MANUAL Heavy Duty Oil Hose Reel 504200 Description Open hose reel for air, water (high or low pressure), oil or grease, depending on model. Uncoil the hose to the desired length. It can
More informationFrame - Front fork 01 1 Ball ring set, complete - - - city 8000101 1 Ball ring set, complete - - - rac 8000034 1 2 Spacer SP3 - - - - 8000035 1 3 Spacer SP1,5 - - - city 8000194 1 Spacer SP10 - - - rac
More informationInternational standard flanges acc.to SAE, ISO, DIN, GOST
Gear Pump High Performance Version GP up to 31 cm 3 (1.89 inch 3 ) p max 3 bar ( PSI) Speed from to RPM Technical Features Operating pressure 8 bar, Peak pressure 3 bar High-strength quality aluminum alloys
More information4A1-114/114KR & 4A1-2 MANUAL TENSIONERS
M L. C O O N AL TO 4A1-114/114KR & 4A1-2 W W W.T R AD IT IO MANUAL TENSIONERS READ THESE INSTRUCTIONS CAREFULLY. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN SEVERE PERSONAL INJURY. GENERAL SAFETY
More informationWRANGLER 1710AB, 2010AB
WRANGLER 1710AB, 2010AB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271 WIRE
More informationParts Catalog T7/T71/T73 M40000/M40001/M40003
T7/T71/T73 M40000/M40001/M40003 REPAIR PARTS CATALOG NO. For machines starting with Serial No. T10001 ISSUED August 2010 ORDERS Please use Part Numbers when ordering and include the machine Serial Number
More informationEaton ET Hydraulic Hose Saw INSTRUCTION MANUAL
Eaton ET9100-07-110 Hydraulic Saw INSTRUCTION MANUAL INSTRUCTION MANUAL Eaton ET9100-07-110 Hydraulic Saw Table of Contents Introduction... 3 Old Method... 3 New Eaton Method... 3 Operation... 4 Operation
More informationMaintenance and care of the. German Red Clipper and its blades
BLADE SYSTEM One of the reasons for the superior cutting power of the German Red Clipper is its unique blade system: The pressure on the top blade can be adjusted according to the type of coat. If the
More informationApplication Tooling Specification
Order No. 200218-3100 FEATURES Application Tooling Specification A full cycle ratcheting hand tool ensures complete crimps Long handles for comfortable crimping with reduced crimping force and a safety
More informationInstruction for edge trimming knife sharpening of M-Type shoe sewing machines
Instruction for edge trimming knife sharpening of M-Type shoe sewing machines 1. Introduction This instruction is a supplement to the instruction for use of electric table sharpener; thus the scope of
More informationEVM - Liberator REPAIR PARTS CATALOG NO. M50206(K) FOR MACHINES STARTING WITH SERIAL NO ISSUED AUGUST Parts Catalog
EVM - Liberator REPAIR PARTS CATALOG NO. M50206(K) FOR MACHINES STARTING WITH SERIAL NO. 5100 ISSUED AUGUST 2003 ORDERS Please use part numbers when ordering and include the serial number of the machine
More informationCHANGING YOUR LANDSCAPE SINCE 1945 OWNER S MANUAL. Tow Hitch Replacement Kit For Rough Cut Trailcutters. Starting Serial # L
CHANGING YOUR LANDSCAPE SINCE 1945 OWNER S MANUAL Tow Hitch Replacement Kit For Rough Cut Trailcutters 21100 Starting Serial # L118-023001 Tools Required: Wrench/Socket Qty. Size (1) 1-1/8 (1) 1-1/16 (2)
More informationUrea/Adblue Hose Reel
www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose
More informationSpare Parts List 2006-03 PS-3300 TH IMPORTANT! - To assure product SAFETY and RELIABILITY, repairs, maintenance or adjustments should be performed by DOLMAR Service Centers, or other qualified service
More informationVIH AEROSPACE INC. a division of VIH Aviation Group
VIH AEROSPACE INC. a division of VIH Aviation Group 1962 Canso Road North Saanich, BC Canada V8L 5V5 P. (250) 6563987 F. (250) 6566861 vih@vih.com INSTRUCTIONS FOR CONTINUED AIRWORTHINESS LED Nav / AntiCollision
More informationPARTS BOOK FLAIL HEADS 90 REAR 3PT HITCH MOUNT
PARTS BOOK FLAIL HEADS 90 REAR 3PT HITCH MOUNT 5.0.8 DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 5704 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE YOUR
More informationVTP-250 VTP-200 VTP-160
VERTICAL TOOL TURRETS VTP-250 VTP-200 VTP-160 INSTRUCTION MANUAL March 2009 Instruction Manual 1 Instruction Manual 2 Index 1. Principle of Working... 5 2. Instructions for fitment on the machine... 6
More informationTuf-Lite and Tuf-Lite II Fans 6000M Series Hub
Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32.8 or 10 Meter Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades
More informationAirworthiness Directive Schedule
Airworthiness Directive Schedule Aeroplane 31 May 2018 Notes: 1. This AD schedule is applicable to GA8 Airvan aircraft manufactured by GA8 Airvan Pty Ltd. (formally Gippsland Aeronautics Pty Ltd.) under
More informationYour Artificial Lift Experts. Oilfield Equipment. upcglobal.com
Your Artificial Lift Experts Oilfield Equipment upcglobal.com Your Artificial Lift Experts Oilfield Equipment upcglobal.com No. 142 Stringing-Up Link No. 14 Triangle C Link The Stringing-up link is used
More informationMechanism Design for Personalized Recommender Systems
Mechanis Design for Personalized Recoender Systes Qingpeng Cai Tsinghua University, China cqp14@ails.tsinghua. edu.cn Aris Filos-Ratsikas University of Oxford, UK Aris.Filos- Ratsikas@cs.ox.ac.uk Pingzhong
More informationSection Ton Ram Operating Instructions for 1-1/4" through 4" Standard & Long Holedall Swaged Couplings
100 Ton Ram Operating Instructions for 1-1/4" through 4" Standard & Long Holedall Swaged Couplings Dixon Valve & Coupling Company 800 High Street Chestertown, MD 21620 ph: 800 355 1991 fax: 800 283 4966
More informationTuf-Lite III Fans 4000KW Series Hub
Tuf-Lite III Fans 4000KW Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 11 through 20 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass
More informationCloze Control Installation Instructions I001 June 2016
Cloze Control Installation Instructions 99-22095-I001 June 2016 *Cloze Control shown here with no grease (Refer to page 8 for clarification on proper grease and application) Order replacement parts today,
More informationACTIMAC SPARE PARTS CATALOGUE ERSATZTEILKATALOG CATALOGUE PIECES DETACHEES CATALOGO PARTI RICAMBIO CATALOGO DE PIEZAS DE RECAMBIO CATALOGO PECAS
ACTIMAC SPARE PARTS CATALOGUE ERSATZTEILKATALOG CATALOGUE PIECES DETACHEES CATALOGO PARTI RICAMBIO CATALOGO DE PIEZAS DE RECAMBIO CATALOGO PECAS, DE REPOSICAO 5 0-05-20 2 5 9 25 2 6 22 2 2 0 5 9 20 5 2
More informationMAX Series 9514 OPERATOR S MANUAL
MAX Series 9514 OPERATOR S MANUAL Persons under age 18 are not permitted to operate or have accessibility to operate this equipment per U.S. Dept. Of Labor Employment Standards Administration Fact Sheet
More informationTuf-Lite and Tuf-Lite II Fans 6000 Series Hub
Tuf-Lite and Tuf-Lite II Fans 6000 Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32 and 33 Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades are made
More informationGT371 HEDGETRIMMER TYPE
GT371 HEDGETRIMMER TYPE 1 Introduction Exploded Drawing Bill Of Material Repair Instructions E13791 GT371-----A New Parts Wiring Diagram Main Menu 3 18 02-04 SEAN HOLDEN GT371 MANUFACTURING PLANT USTI
More informationExploded view slicer: 834 EPC
Exploded view slicer: 834 EPC DEKO Holland Simon Stevinweg 19 6827 BS Arnhem The Netherlands June 2010. Recommended spareparts list 834EPC Part no. Description Assembly 2301-5202 V-belt knife box 2301-5209
More informationLOCKS; KEYS; WINDOW OR DOOR FITTINGS; SAFES
XXXX E05B E05B E05 LOCKS; KEYS; WINDOW OR DOOR FITTINGS; SAFES Note(s) In this class, the following terms are used with the meanings indicated: wing is a general term for swingable, slidable, or otherwise
More informationREAD ME FIRST! IMPORTANT WARNING! ENG. Roof top tent
Roof top tent ENG TENT031 220 min READ ME FIRST! Thank you for purchasing a Front Runner Roof Top Tent. Before you start, take a moment to familiarize yourself with these Fitting Instructions and the components
More informationMarch 11, ,750,071 C. F. M. VAN BERKEL SLI CING MACHINE. Filed June 20, Sheets-Sheet 1
» March 11, 1930. C. F. M. VAN BERKEL SLI CING MACHINE 1,750,071 Filed June 20, 1927 2 Sheets-Sheet 1 March 11, 1930. c, F, M, VAN BERKEL 1,750,071 SLICING MACHINE Filed June 20, 1927 2 Sheets-Sheet 2
More informationPage 92
Page 92 Page 90 Page 91 Page 89 Page 94 Page 93 Page 88 Page 87 175 c c a a b 175 800 750 1 STAINLESS STEEL ANGLE FLOOR OUTSIDE SUBSTATION 1700 400 A A 100 100 1600 13 BOLT SEE DETAIL D ON R.C.C.
More informationJARVIS. Model 70 Airsnip Air Powered Scissors
Air Powered Scissors EQUIPMENT SELECTION... Ordering No. Airsnip Model 70... 4019009 Air Filter/Regulator/Lubricator.. 3022003 Balancer... 1350084 Power--Pak (250 PSI)... 4026016 TABLE OF CONTENTS... Page
More informationGT370 HEDGETRIMMER TYPE
GT370 HEDGETRIMMER TYPE 1 Introduction Exploded Drawing Bill Of Material Repair Instructions E13791 GT370-----A New Parts Wiring Diagram Main Menu 44 18 02-04 SEAN HOLDEN GT370 MANUFACTURING PLANT USTI
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationSE-Unimont The parts marked with an asterisk *) are wear parts, for which no liability based on any legal regulations whatsoever can be accepted
SE-Unimont 8-20 Pos. Ref.No. Description 01 5198883 WH 8300 Machine body 8-15 02 5198883 WH 8213 Lift guide 03 5198883 WH 8214 Trapezoid spindle TR 32 x 3 04 5198883 WH 8215 Fixing flange 05 5198883 WH
More informationSE-Unimont 8-15 Pos. Ref.No. description WH 8000 Machine body WH 8213 Lift guide WH 8214 Trapezoid spindle TR
SE-Unimont 8-15 Pos. Ref.No. description 01 5198883 WH 8000 Machine body 8-15 02 5198883 WH 8213 Lift guide 03 5198883 WH 8214 Trapezoid spindle TR 32 x 12 04 5198883 WH 8215 Fixing flange 05 5198883 WH
More informationNotes, Parts List & Drawings
Biomass Chopper/Cutter Notes, Parts List & Drawings Page 1 of 16 The Easy BioChop biomass chopper/cutter was designed to cut both wet and dry biomass and to accomplish a number of goals. The objectives
More informationLouvre Specifications
Louvre Specifications Louvre System Components 01. Louvre windows shall be Kool Vu as manufactured by Pty Ltd. 0. Louvre channel frame shall be in extruded architectural grade 0 T aluminium. New Clips
More informationaccidents which arise due to non-observance of these instructions and the safety information herein. CAUTION:
AUTO REWIND HOSE REEL Model: 7640 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This
More informationDiscount Schedule: C2. Subclass: DS0. Type 1 & 3R Double-Door Telephone Cabinet T-Handle Lock. Discount Schedule: C2.
T-Handles Illustration Sheet and Type 3R Double-Door Enclosure Padlock Handle Type 3R Padlock Handle 25350 Type 3R padlock handle Type 3R Padlock Handle is intended to be used as a replacement mechanism
More informationMaintenance Manual HYDRANT COUPLER F250 SERIES
Maintenance Manual HYDRANT COUPLER F250 SERIES NOTICE: PROPRIETARY INFORMATION OF WHITTAKER CONTROLS, INC., A BUSINESS UNIT OF MEGGITT PLC. THE INFORMATION CONTAINED IN THIS DOCUMENT IS DISCLOSED IN CONFIDENCE.
More informationHANDLES AND CONTROL CABLES
Worm Drive Transmission........................ 1 Single Speed Spur/Bevel Gear Transmission............. Single Speed Bevel Gear Transmission................ Three Speed Transmission.......................
More informationSERIES 4030 BASE MOUNTED PUMP CENTERLINE DISCHARGE "L" DESIGNATION PARTS LIST 1 5/8" IMPELLER BORE /8" MECHANICAL SEAL NEW DESIGN
FILE NO.: 00.1 DAE: May 1, 01 UPEREDE: 00.1 DAE: December 1, 011 PAR LI ERIE 00 BAE MOUNED PUMP CENERLINE DICHARGE "L" DEIGNAION 1 /8" IMPELLER BORE -- 1/8" MECHANICAL EAL NEW DEIGN NEMA FRAME AIGNMEN
More informationDUPLEX STRAINERS BULLETIN NO KECKLEY COMPANY 3400 Cleveland Street P.O. Box 67 Skokie, Illinois 60076
Distributed By: M&M Control Service, Inc. www.mmcontrol.com/keckley.php 800-876-006 847-6-066 BULLETIN NO. 9400- DUPLEX STRAINERS Shown with Optional Differential Pressure Indicator KECKLEY COMPANY 400
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationLiberty Process Equipment, Inc.
AP - Operation & Assembly Speed, temperature, viscosity, suction lift, discharge pressure, abrasive content and corrosive action of the liquid be handled should all be considered in applying these pumps.
More informationFLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE
ZIP DEE Inc. 96 Crossen Ave. Elk Grove Village, IL 60007(847)437-0980 (800)338-2378 HEAD CASTING AWNING RAIL FLEX KEY ASSEMBLY..._ o GM1 Installation Instruction GMC Motorhome RAFTER ARM TUBE MAIN ARM
More informationType N550 Packing Removal/Replacement
Instruction Manual MCK-1155 Type N550 April 1981 Type N550 Packing Removal/Replacement! WARNING Only qualified servicemen should attempt to repair these valves. The skill required is similar to the complexity
More informationtechnical documentation
FritsJurgens Pivot Door System technical documentation FRITSJURGENS MPDS-S0 RVS F9000-SERIES 1 index 4 7 product description content of hinge package setting options 15 mm 11 14 technical drawings optional
More informationT&S BRASS AND BRONZE WORKS, INC.
Saddleback Cove / P.O. Box 088 Travelers Rest, SC 9690 BL-570-08 Travelers Rest, SC: 800-76-03 Simi Valley, CA: 800-3-050 Fax: 86-83-358 www.tsbrass.com 7 /" This Space for Architect/Engineer Approval
More informationAdvantage Plus TIM-3600 Series Reel
Read the following precautions and instructions before you begin assembly or using. Failure to comply with these instructions could result in personal injury or property damage. Keep these instructions
More informationOperation, Cleaning & Maintenance. For Aluminium Secondary
, Cleaning & Maintenance For Aluminium Secondary Contents Horizontal Sliders 3 Vertical Sliders - Non-Balanced 4 Vertical Sliders - Balanced 5 Vertical Sliders - Tilt Back 6-7 Lift Outs 8 Hinged Units
More informationT&S BRASS AND BRONZE WORKS, INC.
Saddleback Cove / P.O. Box 1088 Travelers Rest, SC 9690 B-0301 Travelers Rest, SC: 800-476-4103 Simi Valley, CA: 800-43-0150 Fax: 864-834-3518 www.tsbrass.com This Space for Architect/Engineer Approval
More informationFREEDOM BUTTON KIT INSTALLATION GUIDE STEP 1
FREEDOM BUTTON KIT INSTALLATION GUIDE Installation of the Freedom Button kit is very simple and similar to the installation of a standard rear takedown pin and bolt catch latch. Before installing your
More informationProfessional Mandoline Manual. Model: 90797
Professional Mandoline Manual Model: 90797 Introduction Your MIU France Stainless Steel Mandoline features a selection of blades with variable thickness adjustments which make it one of the most versatile
More informationNOTICE TO AERODROME LICENSE HOLDERS NOTAL 01/2019
Notice Nuber: 01/2019 Version: 01 Effective Date: 15/01/2019 Subject: AMENDMENT TO SEYCHELLES MANUAL OF AERODROME STANDARDS 1. INTRODUCTION 1.1. The objective of this NOTAL is to provide aerodroe operators
More informationPARTS MANUAL. For AST and ATU Model Tuckunder Liftgates
A N T H O N Y L I F T G A T E S, I N C. PARTS MANUAL For AST and ATU Model Tuckunder Liftgates MODELS AST-1500-SF AST-2000-SF AST-2500-SF AST-3000-SF ASTL-1800-SF ASTL-2500-SF ATU-1800-SF ATU-2500-SF ATU-3000-SF
More informationDUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE:
BULLETIN NO. 9400- DUPLEX STRAINERS 800-KECKLEY (800-2-9) 847/674-8422 FAX: 847/674-206 E-MAIL: SALES@KECKLEY.COM WEB SITE: WWW.KECKLEY.COM NO QUESTION. WE HAVE THE ANSWERS. Shown with Optional Differential
More informationSetting the standard for
Owners Manual Setting the standard for Caravan & Trailer Jacks WARNING THIS PRODUCT IS ONLY TO BE USED WITH THE TRAIL-A-MATE ENGAGEMENT FITTING PLEASE FAMILIARISE YOURSELF WITH THIS MANUAL BEFORE USING
More informationWenger Corporation 2014 Printed in USA 05/14 Part #049B015-09
Assembly Instructions Tuba Tamer Contents Important User Information...........................2 Replacemant Parts List..............................3 Assembly.........................................4
More informationPIONEER LITE PATIO AWNING OWNER'S MANUAL
A Manual Crank Operated Awning RV OWNER'S MANUAL TABLE OF CONTENTS Introduction... 2 Operating the Awning... 3 To Open the Awning:... 3 Adjusting the Pitch... 4 Rain Release Setting... 4 Setting the Arms
More informationParts Catalog T7/T71/T73 M40000/M40001/M40003
T7/T71/T73 M40000/M40001/M40003 REPAIR PARTS CATALOG NO. M30202(R) For Machines with Serial No. T6183-T9031 ISSUED July 2009 ORDERS Please use Part Numbers when ordering and include the the machine Serial
More informationInstructions for Converting Range to Operate on Liquefied Petroleum Gas
INSTALLATION AND SERVICES MUST BE PERFORMED BY A QUALIFIED INSTALLER IMPORTANT: SAVE INSTRUCTION MANUAL FOR THE LOCAL INSPECTOR S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE This conversion
More informationSPIRAL SLICER Instruction Manual Model #5280 & 5280M. Part No Revised Feb. 2010
SPIRAL SLICER Instruction Manual Model #5280 & 5280M Part No. 82876 Revised Feb. 2010 SAFETY PRECAUTIONS INSTALLATION INSTRUCTIONS Inspection of Shipment: 5280 & 5280M SPIRAL SLICER Unpack all cartons
More informationref no part no name of parts note
- 1 - ref no part no name of parts note 1 SP-760001101 MACHINE FARME 2 SP-750005001 MAIN SHAFT BUSHING 3 SP-750006002 MAIN SHAFT BUSHING 4 SP-000018012 SCREW 5 SP-750013105 LOOPER SHAFT BUSHING 6 SP-750023005
More informationIMPORTANT NOTICE. Professional Mandoline Manual
IMPORTANT NOTICE PLEASE DO NOT RETURN TO STORE. If you have any problems with this unit, contact Consumer Relations for service. PHONE: 206-605-0555 Please read operating instructions before using this
More informationBEV-TENT COMPONENTS AGENTS. GAUTENG REB MARKETING-Nick Tel:- (011) Fax:- (011)
BEV-TENT COMPONENTS FACTORY KNYSNA Tel:- (044) 3823215 / 3824707 / 3823152 Fax:- (044) 3825709 Cel:- 0825543947 info@bgboats.co.za accounts@bgboats.co.za orders@bgboats.co.za - Ordering www.bev-tent.co.za
More informationProfessional Mandoline Manual. Model: 90757
Professional Mandoline Manual Model: 90757 Introduction Your MIU France Composite Mandoline features a selection of blades with variable thickness adjustments which make it one of the most versatile kitchen
More informationBacchus Marsh BACCHUS MARSH WORKS SIDING (31 M) BACCHUS MARSH (31 MILES 61 CHAINS 15 LINKS)
Bacchus Marsh BACCHUS MARSH WORKS SIDING (31 M) (31.05.1920) Opened. Points secured by two staff locks one rodded to catch, other rodded to safety points (WN 22/20 extracts, Staff lock register II) (06.09.1921)
More informationCloset and Specialty Hardware
Closet and Specialty Hardware Door & Mirror Hardware...100 Magnetic and Bullet Catches... 100 Sliding Door Pulls........................................ 100 Mirror Clips/Glass Clips, Fittings and Latches...
More information2,775,947 1/1957 Mosler. 109/47
USOO5915802A United States Patent (19) 11 Patent Number: 5,915,802 Siler (45) Date of Patent: Jun. 29, 1999 54 AUTOMATIC TELLER MACHINE (ATM) 3,002,800 10/1961. McMahan... 312/216 CASSETTE SECURITY SYSTEM
More informationKAWNEER 1786 RIM EXIT DEVICE
FEBRUARY, 2015 1 DOOR STILE Device C L 40" 41-9/32" Cylinder C L Bottom of door RIM EXIT DEVICE LOCATION DOGGING KEY EXIT DEVICE FILLER PLATE CYLINDER & CYLINDER RING HOUSING COVER CYLINDER INSTALLATION
More informationGraphite Ribbon/Filament Packing for Fisher Sliding Stem Valves
Instruction Manual Graphite Packing for Sliding-Stem Graphite Ribbon/Filament Packing for Fisher Sliding Stem Valves Contents Introduction... 1 Scope of Manual... 1 Description... 1 Storage and Startup...
More informationMIP-1495 MANUAL TENSIONER
MIP-1495 MANUAL TENSIONER Midwest Industrial Packaging! 3620 West Lake Avenue! Glenview, Illinois 60026 READ THESE INSTRUCTIONS CAREFULLY. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN SEVERE PERSONAL
More information