TREWAVIS SURGICAL CATALOGUE

Transcription

1 TREWAVIS SURGICAL CATALOGUE Trewavis Surgical Instruments Pty Ltd 21 Michellan Court, Bayswater, Victoria 3153 Australia. p: (03) f: (03) e: Version 2.8

2 This page intentionally left blank

3 CONTENTS Section 1: Electrosurgery Single Use Forceps with Cables 1.1 Monopolar Forceps for Breast Surgery 1.2 Forceps - Tip Widths & Styles 1.3 Monopolar Coagulation Forceps 1.4 Bipolar Coagulation Forceps 1.9 Blade/Spatula Electrodes 1.15 Needle Electrodes 1.16 Ball Electrodes 1.17 Reusable Lletz/LEEP Electrodes 1.18 Single Use Sterile Lletz/LEEP Electrodes 1.19 Vaginal & Sims Speculae 1.20 ENT Electrodes 1.21 Tungsten Micro Dissection Electrodes 1.22 Specialty Electrodes 1.22 Laparoscopy Monopolar Electrodes 1.23 Arthroscopy Electrodes 1.24 Monopolar Leads 1.26 Monopolar Lead/Plug Adaptor 1.27 Bipolar Leads 1.30 Quivers 1.31 Section 2: Orthopaedics Kirschner Wires, Steinmann Pins & Ilyzarov Wires 2.1 Guide Wires, Switching Sticks & Cannulated Sleeves 2.2 Section 3: Retractors Keon Cohen Retractors 3.1 Keon Retractor 3.2 Fukuda Retractor 3.3 Hasson S Retractor 3.3 Fitzpatrick Retractors 3.3 Section 4: Miscellaneous Rectal Suction Biopsy Tool 4.1 Areola Marker 4.2 Double Instrument Holders 4.3 Instrument Repair Service 4.4 Shaft Replacement 4.5 Section 5: Legal Statements Conditions of Sale 5.1

4 Introduction Trewavis Surgical is a specialist manufacturer of reusable and single use sterile electrosurgical instruments and accessories, Kirschner Wires, Steinmann Pins, Retractors and a unique Rectal Biopsy Tool (SBT 100) used in paediatrics. Trewavis Surgical is an international supplier of these products. Reusable and single use electrosurgical instruments and accessories The Company manufactures a full range of bipolar and monopolar forceps, electrodes (general, arthroscopy, Lletz/LEEP, and specialty), laparoscopy probes/electrodes, electrode holders and leads. Non-Stick electrodes are also available. The reusable and single use electrosurgical instruments and accessories are compatible with most electrosurgical generators and systems currently being used throughout the world. Trewavis Surgical can manufacture electrosurgical devices to your specifications. Custom made products are non-returnable. Kirschner wires and Steinmann pins A full range of non-sterile bone wires and pins are manufactured, in implant grade stainless steel, to the highest international standards. Rectal Suction Biopsy Tool (SBT 100) This unique instrument has been designed to collect biopsy specimens to aid in the diagnosis of Hirschsprung's Disease in new-born and young children. It has been sold throughout the world since Instrument repairs Trewavis Surgical offers a fast, reliable and cost effective instrument repair and maintenance service. The company specialises in the reinsulation of electrosurgical devices using the highest quality insulation materials available. Quality assurance Trewavis Surgical offers an unsurpassed level of service and quality. Trewavis Surgical is ISO13485 certified, FDA GMP compliant and is an FDA registered manufacturer. The company holds TGA conformity assessment certificates. Trewavis Surgical s products conform to the requirements of the European Unions Directive 93/42/EEC on Medical Devices. The company s Authorised Representative in the EU is: Trewavis Surgical Instruments Pty Ltd United Kingdom Warranty All products of Trewavis Surgical are shipped free of defects in materials and workmanship. Trewavis Surgical will repair or replace, at its option, products which have been returned to it or its distributor within 30 days after shipment of the product to the original Purchaser, and which on examination discloses, to the Company's satisfaction, that the product is defective and was not the subject of misuse or modification from original specifications. A full Warranty Statement is included with the Instructions for Use packed with each product. Disclaimer Pictures in the catalogue are representational only.

5 SINGLE USE STERILE FORCEPS WITH CABLES BIPOLAR FORCEPS WITH 3 METRE CABLE FOR SINGLE USE PRODUCT NUMBER DESCRIPTION LENGTH TIP STYLE / WIDTH TSS300 Jewellers 115mm Straight Tip 0.5mm Tip TSS301 Adson 120mm Smooth Tip 1.0mm Tip TSS302 Adson 120mm Serrated Tip 1.0mm Tip TSS303 Straight 150mm Smooth Tip 2.0mm Tip TSS304 Bayonet 200mm Smooth Tip 1.5mm Tip TSS305 Bayonet 200mm Smooth Tip 2.0mm Tip TSS306 Straight 175mm Smooth Tip 0.7mm Tip TSS307 Adson 120mm Smooth Tip 0.5mm Tip MONOPOLAR FORCEPS WITH 3 METRE CABLE FOR SINGLE USE PRODUCT NUMBER DESCRIPTION LENGTH TIP STYLE / WIDTH TSS400 Adson 120mm Serrated Tip 1.0mm Tip TSS401 Straight 155mm Smooth Tip 1.0mm Tip TSS402 Bayonet 200mm Serrated Tip 1.0mm Tip TSS403 Bayonet 200mm Serrated, Angled Tip 1.0mm Tip 1.1

6 AUSTRALIAN MADE SPECIAL MONOPOLAR FORCEPS MONOPOLAR FORCEPS FOR BREAST SUGERY PRODUCT NUMBER DESCRIPTION MONOPOLAR FORCEPS 200mm length Forceps were developed originally by Trewavis Surgical as a custom made special for Breast Surgery, but can be adapted for use in various surgeries. This instrument can perform the actions of a forcep as well as a blade electrode. The forcep tips are Teflon coated and are designed so that when closed they replicate the action of a blade electrode. The advantages of using the in comparison to a switch pencil with blade electrode and monopolar forceps are: Ability to be able to cut and seal vessels with the one instrument Avoid tangling of cords between multiple instruments Time saving Allows Surgeon to react faster in comparison to using 2 instruments Reduce blood loss of the patient Lead to Suit: A 1.2

7 FORCEPS - TIP WIDTHS FORCEPS - TIP STYLES Smooth Serrated 1 x 2 Teeth 1 x 2 Teeth Serrated 1.3

8 MONOPOLAR COAGULATION FORCEPS POTTS SMITH - STRAIGHT E Scale 1:1 PRODUCT NUMBER LEAD MOUNT TIP STYLE / WIDTH LENGTH LEAD TO SUIT E Screw Serrated 1.5mm 150mm (6 ) A F Screw Serrated 1.5mm 175mm (7 ) A G Screw Serrated 1.5mm 200mm (8 ) A I Screw Serrated 1.5mm 250mm (10 ) A E 2.5mm Pin Serrated 1.5mm 150mm (6 ) A F 2.5mm Pin Serrated 1.5mm 175mm (7 ) A G 2.5mm Pin Serrated 1.5mm 200mm (8 ) A I 2.5mm Pin Serrated 1.5mm 250mm (10 ) A E 4.76mm (3/16 ) Push/Pull Serrated 1.5mm 150mm (6 ) A F 4.76mm (3/16 ) Push/Pull Serrated 1.5mm 175mm (7 ) A G 4.76mm (3/16 ) Push/Pull Serrated 1.5mm 200mm (8 ) A I 4.76mm (3/16 ) Push/Pull Serrated 1.5mm 250mm (10 ) A E 4mm Push/Pull Serrated 1.5mm 150mm (6 ) B F 4mm Push/Pull Serrated 1.5mm 175mm (7 ) B G 4mm Push/Pull Serrated 1.5mm 200mm (8 ) B I 4mm Push/Pull Serrated 1.5mm 250mm (10 ) B E Screw 1 x 2 Teeth 150mm (6 ) A F Screw 1 x 2 Teeth 175mm (7 ) A G Screw 1 x 2 Teeth 200mm (8 ) A I Screw 1 x 2 Teeth 250mm (10 ) A E 2.5mm Pin 1 x 2 Teeth 150mm (6 ) A F 2.5mm Pin 1 x 2 Teeth 175mm (7 ) A G 2.5mm Pin 1 x 2 Teeth 200mm (8 ) A I 2.5mm Pin 1 x 2 Teeth 250mm (10 ) A E 4.76mm (3/16 ) Push/Pull 1 x 2 Teeth 150mm (6 ) A F 4.76mm (3/16 ) Push/Pull 1 x 2 Teeth 175mm (7 ) A G 4.76mm (3/16 ) Push/Pull 1 x 2 Teeth 200mm (8 ) A I 4.76mm (3/16 ) Push/Pull 1 x 2 Teeth 250mm (10 ) A E 4mm Push/Pull 1 x 2 Teeth 150mm (6 ) B F 4mm Push/Pull 1 x 2 Teeth 175mm (7 ) B G 4mm Push/Pull 1 x 2 Teeth 200mm (8 ) B I 4mm Push/Pull 1 x 2 Teeth 250mm (10 ) B Tip Width and Style Chart See Page

9 MONOPOLAR COAGULATION FORCEPS POTTS SMITH - BAYONET E Scale 1:1 PRODUCT NUMBER LEAD MOUNT TIP STYLE / WIDTH LENGTH LEAD TO SUIT E Screw Serrated 1.5mm 150mm (6 ) A F Screw Serrated 1.5mm 175mm (7 ) A G Screw Serrated 1.5mm 200mm (8 ) A H Screw Serrated 1.5mm 225mm (9 ) A E 2.5mm Pin Serrated 1.5mm 150mm (6 ) A F 2.5mm Pin Serrated 1.5mm 175mm (7 ) A G 2.5mm Pin Serrated 1.5mm 200mm (8 ) A H 2.5mm Pin Serrated 1.5mm 225mm (9 ) A E 4.76mm (3/16 ) Push/Pull Serrated 1.5mm 150mm (6 ) A F 4.76mm (3/16 ) Push/Pull Serrated 1.5mm 175mm (7 ) A G 4.76mm (3/16 ) Push/Pull Serrated 1.5mm 200mm (8 ) A H 4.76mm (3/16 ) Push/Pull Serrated 1.5mm 225mm (9 ) A E 4mm Push/Pull Serrated 1.5mm 150mm (6 ) B F 4mm Push/Pull Serrated 1.5mm 175mm (7 ) B G 4mm Push/Pull Serrated 1.5mm 200mm (8 ) B H 4mm Push/Pull Serrated 1.5mm 225mm (9 ) B E Scale 1:1 PRODUCT NUMBER LEAD MOUNT TIP STYLE / WIDTH LENGTH LEAD TO SUIT E Screw Angled, Serrated 1.5mm 150mm (6 ) A F Screw Angled, Serrated 1.5mm 175mm (7 ) A G Screw Angled, Serrated 1.5mm 200mm (8 ) A H Screw Angled, Serrated 1.5mm 225mm (9 ) A E 2.5mm Pin Angled, Serrated 1.5mm 150mm (6 ) A F 2.5mm Pin Angled, Serrated 1.5mm 175mm (7 ) A G 2.5mm Pin Angled, Serrated 1.5mm 200mm (8 ) A H 2.5mm Pin Angled, Serrated 1.5mm 225mm (9 ) A E 4.76mm (3/16 ) Push/Pull Angled, Serrated 1.5mm 150mm (6 ) A F 4.76mm (3/16 ) Push/Pull Angled, Serrated 1.5mm 175mm (7 ) A G 4.76mm (3/16 ) Push/Pull Angled, Serrated 1.5mm 200mm (8 ) A H 4.76mm (3/16 ) Push/Pull Angled, Serrated 1.5mm 225mm (9 ) A E 4mm Push/Pull Angled, Serrated 1.5mm 150mm (6 ) B F 4mm Push/Pull Angled, Serrated 1.5mm 175mm (7 ) B G 4mm Push/Pull Angled, Serrated 1.5mm 200mm (8 ) B H 4mm Push/Pull Angled, Serrated 1.5mm 225mm (9 ) B Tip Width and Style Chart See Page

10 MONOPOLAR COAGULATION FORCEPS ADSON A Scale 1:1 PRODUCT NUMBER LEAD MOUNT TIP STYLE / WIDTH LENGTH LEAD TO SUIT A Screw Serrated 1.5mm 125mm (5 ) A B Screw 1 x 2 Teeth 125mm (5 ) A C Screw Smooth 1.5mm 125mm (5 ) A A 2.5mm Pin Serrated 1.5mm 125mm (5 ) A B 2.5mm Pin 1 x 2 Teeth 125mm (5 ) A C 2.5mm Pin Smooth 1.5mm 125mm (5 ) A A 4.76mm (3/16 ) Push/Pull Serrated 1.5mm 125mm (5 ) A B 4.76mm (3/16 ) Push/Pull 1 x 2 Teeth 125mm (5 ) A C 4.76mm (3/16 ) Push/Pull Smooth 1.5mm 125mm (5 ) A A 4mm Push/Pull Serrated 1.5mm 125mm (5 ) B B 4mm Push/Pull 1 x 2 Teeth 125mm (5 ) B C 4mmPush/Pull Smooth 1.5mm 125mm (5 ) B Tip Width and Style Chart See Page

11 MONOPOLAR COAGULATION FORCEPS WAUGHS, McINDOES, GILLIES A A PRODUCT NUMBER DESCRIPTION LEAD MOUNT TIP STYLE LENGTH LEAD TO SUIT A Waughs 4.76mm (3/16 ) Push/Pull Serrated 175mm (7 ) A B Waughs 4.76mm (3/16 ) Push/Pull Serrated 200mm (8 ) A C Waughs 4.76mm (3/16 ) Push/Pull 1 x 2 Teeth Serrated 175mm (7 ) A D Waughs 4.76mm (3/16 ) Push/Pull 1 x 2 Teeth Serrated 200mm (8 ) A E McIndoes 4.76mm (3/16 ) Push/Pull Serrated 150mm (6 ) A F McIndoes 4.76mm (3/16 ) Push/Pull 1 x 2 Teeth Serrated 150mm (6 ) A G Gillies 4.76mm (3/16 ) Push/Pull Serrated 150mm (6 ) A H Gillies 4.76mm (3/16 ) Push/Pull 1 x 2 Teeth Serrated 150mm (6 ) A A Waughs 4mm Push/Pull Serrated 175mm (7 ) B B Waughs 4mm Push/Pull Serrated 200mm (8 ) B C Waughs 4mm Push/Pull 1 x 2 Teeth Serrated 175mm (7 ) B D Waughs 4mm Push/Pull 1 x 2 Teeth Serrated 200mm (8 ) B E McIndoes 4mm Push/Pull Serrated 150mm (6 ) B F McIndoes 4mm Push/Pull 1 x 2 Teeth Serrated 150mm (6 ) B G Gillies 4mm Push/Pull Serrated 150mm (6 ) B H Gillies 4mm Push/Pull 1 x 2 Teeth Serrated 150mm (6 ) B Tip Width and Style Chart See Page

12 MONOPOLAR COAGULATION FORCEPS REMINGTON HOBBS - STRAIGHT A PRODUCT NUMBER LEAD MOUNT TIP STYLE LENGTH LEAD TO SUIT A Screw Serrated 250mm (10") A A 2.5mm Pin Serrated 250mm (10 ) A A 4.76mm (3/16 ) Push/Pull Serrated 250mm (10 ) A A 4mm Push/Pull Serrated 250mm (10 ) B REMINGTON HOBBS - ANGLED B PRODUCT NUMBER LEAD MOUNT TIP STYLE LENGTH LEAD TO SUIT B Screw Serrated 250mm (10 ) A B 2.5mm Pin Serrated 250mm (10 ) A B 4.76mm (3/16 ) Push/Pull Serrated 250mm (10 ) A B 4mm Push/Pull Serrated 250mm (10 ) B Tip Width and Style Chart See Page

13 BIPOLAR COAGULATION FORCEPS POTTS SMITH - STRAIGHT G PRODUCT NUMBER TIP STYLE / WIDTH DESCRIPTION LENGTH G Smooth 1.0mm Insulated 175mm (7 ) H Smooth 1.0mm Insulated 200mm (8 ) I Smooth 1.0mm Insulated 225mm (9 ) G Smooth 1.0mm Non-Insulated 175mm (7 ) H Smooth 1.0mm Non-Insulated 200mm (8 ) I Smooth 1.0mm Non-Insulated 225mm (9 ) POTTS SMITH - BAYONET G PRODUCT NUMBER TIP STYLE / WIDTH DESCRIPTION LENGTH G Smooth 1.0mm Insulated 175mm (7 ) H Smooth 1.0mm Insulated 200mm (8 ) I Smooth 1.0mm Insulated 225mm (9 ) G Smooth 1.0mm Non-Insulated 175mm (7 ) H Smooth 1.0mm Non-Insulated 200mm (8 ) I Smooth 1.0mm Non-Insulated 225mm (9 ) Tip Width and Style Chart See Page

14 BIPOLAR COAGULATION FORCEPS POTTS SMITH - BAYONET, ANGLED TIP G PRODUCT NUMBER TIP STYLE / WIDTH DESCRIPTION LENGTH G Smooth, Angled 1.0mm Insulated 175mm (7 ) H Smooth, Angled 1.0mm Insulated 200mm (8 ) I Smooth, Angled 1.0mm Insulated 225mm (9 ) G Smooth, Angled 1.0mm Non-Insulated 175mm (7 ) H Smooth, Angled 1.0mm Non-Insulated 200mm (8 ) I Smooth, Angled 1.0mm Non-Insulated 225mm (9 ) ADSON B Scale 1:1 PRODUCT NUMBER TIP STYLE / WIDTH DESCRIPTION LENGTH A Serrated 1.5mm Insulated 125mm (5 ) B 1 x 2 Teeth Insulated 125mm (5 ) C Smooth 1.5mm Insulated 125mm (5 ) A Serrated 1.5mm Non-Insulated 125mm (5 ) B 1 x 2 Teeth Non-Insulated 125mm (5 ) C Smooth 1.5mm Non-Insulated 125mm (5 ) Tip Width and Style Chart See Page

15 BIPOLAR COAGULATION FORCEPS STRAIGHT IRIS A PRODUCT NUMBER TIP STYLE DESCRIPTION LENGTH A Needle, Smooth Insulated 100mm (4 ) A Needle, Smooth Non-Insulated 100mm (4 ) CURVED IRIS B PRODUCT NUMBER TIP STYLE DESCRIPTION LENGTH B Needle, Smooth Insulated 100mm (4 ) B Needle, Smooth Non-Insulated 100mm (4 ) JEWELLERS C PRODUCT NUMBER TIP STYLE DESCRIPTION LENGTH C Needle, Smooth Insulated 100mm (4 ) C Needle, Smooth Non-Insulated 100mm (4 ) Tip Width and Style Chart See Page

16 BIPOLAR COAGULATION FORCEPS SEMKIN MICRO-STOPS A Scale 1:1 PRODUCT NUMBER TIP WIDTH / STYLE DESCRIPTION LENGTH A 0.7mm, Smooth Insulated 140mm (5½ ) B 0.7mm, Smooth Non-Insulated 140mm (5½ ) SEMKIN C Scale 1:1 PRODUCT NUMBER TIP WIDTH / STYLE DESCRIPTION LENGTH C 2.0mm, Smooth Insulated 150mm (6 ) HARDY MICRO-STOPS A PRODUCT NUMBER TIP STYLE DESCRIPTION LENGTH A 0.5mm, Smooth Insulated 210mm (8¼ ) B 0.5mm, Smooth Non-Insulated 210mm (8¼ ) Tip Width and Style Chart See Page

17 BIPOLAR COAGULATION FORCEPS GERALD - STRAIGHT A PRODUCT NUMBER TIP WIDTH / STYLE DESCRIPTION LENGTH A 1.0mm Smooth Insulated 175mm (7 ) B 1.0mm Smooth Non-Insulated 175mm (7 ) GERALD - BAYONET C PRODUCT NUMBER TIP WIDTH / STYLE DESCRIPTION LENGTH C 1.0mm Smooth Insulated 190mm (7½ ) D 1.0mm Smooth Non-Insulated 190mm (7½ ) SCOVILLE - GREENWOOD C PRODUCT NUMBER TIP WIDTH / STYLE DESCRIPTION LENGTH A 1.5mm, Smooth Insulated 195mm (7¾ ) B 1.5mm, Smooth Non-Insulated 195mm (7¾ ) C 2.0mm, Smooth Insulated 195mm (7¾ ) D 2.0mm, Smooth Non-Insulated 195mm (7¾ ) Tip Width and Style Chart See Page

18 BIPOLAR COAGULATION FORCEPS CUSHING - STRAIGHT A Scale 1:1 PRODUCT NUMBER TIP WIDTH / STYLE DESCRIPTION LENGTH A 0.7mm, Smooth Insulated 150mm (6 ) B 0.7mm, Smooth Non-Insulated 150mm (6 ) C 1.5mm, Smooth Insulated 175mm (7 ) D 1.5mm, Smooth Non-Insulated 175mm (7 ) CUSHING - BAYONET E PRODUCT NUMBER TIP WIDTH / STYLE DESCRIPTION LENGTH E 0.7mm, Smooth Insulated 190mm (7½ ) F 0.7mm, Smooth Non-Insulated 190mm (7½ ) G 2.0mm, Smooth Insulated 190mm (7½ ) H 2.0mm, Smooth Non-Insulated 190mm (7½ ) Tip Width and Style Chart See Page

19 BLADE/SPATULA ELECTRODES A Scale 1: E Scale 1: A Scale 1: A Scale 1:1 PRODUCT NUMBER A D E F G H I J A D E F G H I J A D E F G H I J DESCRIPTION 25mm (1 ) Blade on 50mm (2 ) shaft 25mm (1 ) Blade on 75mm (3 ) shaft 25mm (1 ) Blade on 100mm (4 ) shaft 25mm (1 ) Blade on 125mm (5 ) shaft 25mm (1 ) Blade on 150mm (6 ) shaft 25mm (1 ) Blade on 175mm (7 ) shaft 25mm (1 ) Blade on 200mm (8 ) shaft 25mm (1 ) Blade on 225mm (9 ) shaft 25mm (1 ) Angled Blade on 50mm (2 ) shaft 25mm (1 ) Angled Blade on 75mm (3 ) shaft 25mm (1 ) Angled Blade on 100mm (4 ) shaft 25mm (1 ) Angled Blade on 125mm (5 ) shaft 25mm (1 ) Angled Blade on 150mm (6 ) shaft 25mm (1 ) Angled Blade on 175mm (7 ) shaft 25mm (1 ) Angled Blade on 200mm (8 ) shaft 25mm (1 ) Angled Blade on 225mm (9 ) shaft 25mm (1 ) Spatula Blade on 50mm (2 ) shaft 25mm (1 ) Spatula Blade on 75mm (3 ) shaft 25mm (1 ) Spatula Blade on 100mm (4 ) shaft 25mm (1 ) Spatula Blade on 125mm (5 ) shaft 25mm (1 ) Spatula Blade on 150mm (6 ) shaft 25mm (1 ) Spatula Blade on 175mm (7 ) shaft 25mm (1 ) Spatula Blade on 200mm (8 ) shaft 25mm (1 ) Spatula Blade on 225mm (9 ) shaft Electrode shank diameter is standard 2.38mm (3/32 ) 1.15

20 NEEDLE ELECTRODES A Scale 1: E Scale 1:1 BULLET C Scale 1:1 PRODUCT NUMBER DESCRIPTION A 25mm (1 ) Fine Needle on 50mm (2 ) shaft D 25mm (1 ) Fine Needle on 75mm (3 ) shaft E 25mm (1 ) Fine Needle on 100mm (4 ) shaft F 25mm (1 ) Fine Needle on 125mm (5 ) shaft G 25mm (1 ) Fine Needle on 150mm (6 ) shaft H 25mm (1 ) Fine Needle on 175mm (7 ) shaft I 25mm (1 ) Fine Needle on 200mm (8 ) shaft J 25mm (1 ) Fine Needle on 225mm (9 ) shaft A 6mm (¼ ) Fine Needle on 50mm (2 ) shaft B 12mm (½ ) Fine Needle on 50mm (2 ) shaft C 12mm (½ ) Fine Needle Insulated Tip on 50mm (2 ) shaft A 6mm (¼ ) Bullet Point Needle (Heavy Duty) on 50mm (2 ) shaft B 12mm (½ ) Bullet Point Needle (Heavy Duty) on 50mm (2 ) shaft C 25mm (1 ) Bullet Point Needle (Heavy Duty) on 50mm (2 ) shaft Electrode shank diameter is standard 2.38mm (3/32 ) 1.16

21 BALL ELECTRODES A Scale 1: E Scale 1:1 PRODUCT NUMBER A E F G H D I J A E F G H I J A E F G H I J DESCRIPTION 3mm Ball on 50mm (2 ) shaft 3mm Ball on 100mm (4 ) shaft 3mm Ball on 125mm (5 ) shaft 3mm Ball on 150mm (6 ) shaft 3mm Ball on 175mm (7 ) shaft 3mm Ball on 190mm (7 ½ ) shaft (Angled Ball) 3mm Ball on 200mm (8 ) shaft 3mm Ball on 225mm (9 ) shaft 4mm Ball on 50mm (2 ) shaft 4mm Ball on 100mm (4 ) shaft 4mm Ball on 125mm (5 ) shaft 4mm Ball on 150mm (6 ) shaft 4mm Ball on 175mm (7 ) Shaft 4mm Ball on 200mm (8 ) shaft 4mm Ball on 225mm (9 ) shaft 5mm Ball on 50mm (2 ) shaft 5mm Ball on 100mm (4 ) shaft 5mm Ball on 125mm (5 ) shaft 5mm Ball on 150mm (6 ) shaft 5mm Ball on 175mm (7 ) shaft 5mm Ball on 200mm (8 ) shaft 5mm Ball on 225mm (9 ) shaft Electrode shank diameter is standard 2.38mm (3/32 ) 1.17

22 REUSABLE LLETZ/LEEP ELECTRODES Dimensional Example A 10mm 12mm 15mm 15mm 20mm B 10mm 8mm 10mm 15mm 12mm A 20mm 25mm 20mm 25mm 4mm Ball B 15mm 15mm 20mm 20mm PRODUCT NUMBER CROSS BAR LENGTH (A) LOOP HEIGHT (B) SHAFT LENGTH (C) WIRE/BALL TYPE & DIAMETER B 10mm 10mm 85mm Stainless Steel (0.3mm) C 20mm 15mm 85mm Stainless Steel (0.3mm) D 25mm 15mm 85mm Stainless Steel (0.3mm) E 4mm Ball 85mm Stainless Steel F 15mm 15mm 85mm Stainless Steel (0.3mm) H 25mm 20mm 85mm Stainless Steel (0.3mm) B 10mm 10mm 130mm Stainless Steel (0.3mm) C 20mm 15mm 130mm Stainless Steel (0.3mm) D 25mm 15mm 130mm Stainless Steel (0.3mm) E 4mm Ball 130mm Stainless Steel B 10mm 10mm 85mm Tungsten (0.2mm) C 20mm 15mm 85mm Tungsten (0.2mm) D 25mm 15mm 85mm Tungsten (0.2mm) B 10mm 10mm 130mm Tungsten (0.2mm) C 20mm 15mm 130mm Tungsten (0.2mm) D 25mm 15mm 130mm Tungsten (0.2mm) F 15mm 15mm 130mm Tungsten (0.2mm) G 20mm 20mm 130mm Tungsten (0.2mm) H 25mm 20mm 130mm Tungsten (0.2mm) B 12mm 8mm 100mm Stainless Steel (0.23mm) C 15mm 10mm 100mm Stainless Steel (0.23mm) D 20mm 12mm 100mm Stainless Steel (0.23mm) B 12mm 8mm 130mm Stainless Steel (0.23mm) C 15mm 10mm 130mm Stainless Steel (0.23mm) D 20mm 12mm 130mm Stainless Steel (0.23mm) B 12mm 8mm 100mm Tungsten (0.2mm) C 15mm 10mm 100mm Tungsten (0.2mm) D 20mm 12mm 100mm Tungsten (0.2mm) B 12mm 8mm 130mm Tungsten (0.2mm) C 15mm 10mm 130mm Tungsten (0.2mm) D 20mm 12mm 130mm Tungsten (0.2mm) Electrode shank diameter is standard 2.38mm (3/32 ), Ball Electrodes available with a non-stick coating. 1.18

23 SINGLE USE STERILE LLETZ/LEEP ELECTRODES LOOP ELECTRODES PRODUCT NUMBER CROSS BAR LENGTH LOOP HEIGHT TSS mm 10 mm TSS mm 10 mm TSS mm 8 mm TSS mm 12 mm TSS mm 15 mm TSS mm 20 mm BALL ELECTRODE PRODUCT NUMBER TSS012 BALL SIZE 5 mm Non Stick 1.19

24 VAGINAL & SIMS SPECULAE GRAVES PRODUCT NUMBER STYLE FINISH SIZE PROCEDURE A Graves Insulated Small For LEEP procedure B Graves Insulated Medium For LEEP procedure C Graves Insulated Large For LEEP procedure D Graves Matt Small For Laser procedure E Graves Matt Medium For Laser procedure F Graves Matt Large For Laser procedure G Sims Insulated Small For LEEP procedure H Sims Insulated Medium For LEEP procedure I Sims Insulated Large For LEEP procedure SIMS 1.20

25 ENT ELECTRODES A Scale 1: B Scale 1: C PRODUCT NUMBER A B D F C E DESCRIPTION 25mm (1 ) Insulated Blade on 50mm (2 ) shaft, 2mm exposed tip 25mm (1 ) Insulated Blade on 50mm (2 ) shaft, 5mm exposed tip 25mm (1 ) Insulated Blade on 100mm (4 ) shaft, 2mm exposed tip 25mm (1 ) Insulated Blade on 125mm (5 ) shaft, 4mm exposed tip Abbey Sub-Mucous Resection Needle, (Adult Version) 3/16 push pull fitting, lead to suit: A Abbey Sub-Mucous Resection Needle (Paediatric Version) 3/16 push pull fitting, lead to suit: A Electrode shank diameter is standard 2.38mm (3/32 ) 1.21

26 TUNGSTEN MICRO DISSECTION NEEDLE ELECTRODES A Scale 1:1 PRODUCT NUMBER A B C D E DESCRIPTION 30mm Straight Needle, 3mm exposed tip 20mm Straight Needle, 3mm exposed tip 40mm Straight Needle, 3mm exposed tip 30mm Needle, 3mm exposed tip at 45 degree angle 112mm Straight Needle, 3mm exposed tip Electrode shank diameter is standard 2.38mm (3/32 ) SPECIALTY ELECTRODES B A PRODUCT NUMBER B A DESCRIPTION Hook Electrode - 5mm x 4mm length tip, 0.9mm diameter tip, 50mm shaft Benjamin Electrode - Electrode Monopolar angled sharp point, 140mm shaft Electrode shank diameter is standard 2.38mm (3/32 ) 1.22

27 LAPAROSCOPY MONOPOLAR ELECTRODES To suit 5mm diameter ports C 3/16 PUSH PULL E 4mm MALE BANANA G HANDLE WITH 4mm MALE BANANA LEAD FITTING 4mm PUSH PULL 3/16 (4.76mm) PUSH PULL 4mm MALE BANANA HANDLE WITH 4mm MALE BANANA LEAD To SUIT B A B B Working Length 340mm 420mm 340mm 420mm 340mm 420mm 340mm 420mm Light Hook A B C D E F G H Heavy Hook A B C D E F G H Spatula A B C D E F G H 10mm Needle A B C D E F G H Button A B C D E F G H LAPAROSCOPY CORSON NEEDLE ELECTRODE B PRODUCT NUMBER DESCRIPTION WORKING LENGTH LEAD FITTING LEAD TO SUIT B Corson Needle (4FR) 390mm 4mm Male Pin B 1.23

28 ARTHROSCOPY ELECTRODES Designed for knee, shoulder, hip, ankle, elbow, & wrist arthroscopy. Slim shaft construction allows enhanced access to confined spaces within the joint. Each electrode is fitted with an anti rotation collar & can be supplied in a selection of shaft lengths. Custom designs available upon request. Lat. Release, Angled Sickle Blade Spike, Angled 90 o Hockey Stick 90 o 1mm Ball, Straight 2mm Ball, Straight 3mm Ball, Straight Lat. Release, Straight 1mm Ball, Angled 2mm Ball, Angled 3mm Ball, Angled 4mm Ball, Angled 1.24

29 ARTHROSCOPY ELECTRODES Small Joint Arthroscopy Electrodes - 115mm Shaft Wrist - Ankle - Elbow Lateral Release Angled Blade Lateral Release Straight Spike Angled 90 o Hockey Stick Angled 90 o Ball 1 mm Straight Ball 1 mm Angled 30 o Ball 2 mm Straight Ball 2 mm Angled 30 o Ball 3 mm Straight Ball 3 mm Angled 30 o Sickle Straight Knee Arthroscopy Electrodes - 150mm Shaft Lateral Release Angled Blade Lateral Release Straight Spike Angled 90 o Hockey Stick Angled 90 o Ball 2 mm Straight Ball 2 mm Angled 30 o Ball 3 mm Straight Ball 3 mm Angled 30 o Ball 4 mm Straight Ball 4 mm Angled 30 o Ball 5 mm Straight Ball 5 mm Angled 30 o Sickle Straight Shoulder Arthroscopy Electrodes - 190mm Shaft Lateral Release Angled Blade Lateral Release Straight Spike Angled 90 o Hockey Stick Angled 90 o Ball 2 mm Straight Ball 2 mm Angled 30 o Ball 3 mm Straight Ball 3 mm Angled 30 o Ball 4 mm Straight Ball 4 mm Angled 30 o Sickle Straight Ball 2 mm Straight Lateral Release Straight Spike Angled 90 o Ball 3 mm Angled 30 o Hip Arthroscopy Electrodes - 250mm Shaft Ball 3 mm Straight Ball 3 mm Angled 30 o Scale 1:1 1.25

30 MONOPOLAR LEADS ESU Plug End Instrument Plug End Bovie jack (7.94mm / 5/16 ) fits the following ESUs: Bard Birtcher Bovie Bowa Concept Conmed/Aspenlab Eschmann Medtrex Neomed Valleylab A A B C D A B Screw Fitting Forceps, chuckhandles, lap probes with female screw fitting. 2.5mm Pin Fitting Forceps, chuckhandles, lap probes with 2.5mm female pin fitting. 4mm Male Banana Fitting Forceps, lap probes with 4mm female banana fitting. 4mm Recessed Male Banana Fitting Forceps, lap probes with 4mm female banana fitting 2mm Pin Fitting Wolf lap cholecystectomy hook electrodes. 4.76mm (3/16 ) Push/Pull Fitting Forceps, chuckhandles, lap probes, with 4.76mm (3/16 ) male push/pull fitting. 4mm Push/Pull Fitting Forceps, chuckhandles, lap probes, lap handles with solid 4mm male pin fitting. New moulded style E G I 4mm Female Banana Fitting Lap probes with 4mm male banana fitting. Light Weight 4mm Push/Pull Fitting Lap handles and instruments with 4mm male banana fitting. 2.8mm Push/Pull Fitting Cook, Microvasive, AcuSnare Snares. All leads have 3.1m (10 ) silicone cables. (Also available with 5m cables to order, change 6th digit of Product No. from 0 to 5 e.g A would become A for 5m cable.) 1.26

31 MONOPOLAR LEAD/PLUG ADAPTORS A Universal plug adaptor will accept all 2mm to 6mm monopolar foot-switching active accessories B Hand Switching to Foot Control adaptor. 1.27

32 Having trouble fitting your Bipolar Leads into your generators? Trewavis Surgical has the solution! Introducing a new range of Australian Made ESU Bipolar Adaptors to suit a variety of generator models. Bipolar Adaptors Remember Flying Leads are now prohibited for sale in Australia by the TGA. Product Number: C To suit: Conmed generators (ABC, 7550, Excalibur) Product Number: B Product Number: D To suit: Erbe generators (ICC80, ICC50) and Alcon Infiniti Trewavis Twin Pin Bipolar Lead To suit Valleylab or similar twin pin spacing. Product Number: I Fits bipolar pencils and USA-style two pin forceps - Trewavis Surgical, Valleylab, Conmed, Olsen, Kirwan & Codman. Product Number: E To suit: Alcon generators (Acurs) 1.28

33 STOP The Misconnection of Electrosurgical Bipolar Electrodes Bipolar Monopolar Return Misconnected Bipolar Electrode Cables Flying Leads as shown in Figure 1 and above are now prohibited. Figure 1. Flexible bipolar electrode cables can allow misconnection of bipolar leads into the monopolar jack, resulting in serious patient injury. Source: MDSR: Hazard [Health Devices Jan 1995;24(1):34-5] Trewavis Surgical has the solution! ESU Plug End Instrument Plug End Product Number: B Trewavis Twin Pin Bipolar Lead To suit Valleylab or similar twin pin spacing Product Number: I Fits bipolar pencils and USA-style two pin forceps - Trewavis Surgical, Valleylab, Conmed, Olsen, Kirwan & Codman. For more information call Trewavis Surgical or refer to TGA News Issue 56 (July 2008) 1.29

34 BIPOLAR LEADS ESU Plug End Instrument Plug End Valleylab Twin Pin B Fits bipolar pencils and USA-style two pin forceps - Trewavis Surgical, Valleylab, Conmed, Olsen, Kirwan, Codman. Valleylab Twin Pin I Same as B but with 45º angled plug Valleylab Twin Pin C Fits European flat pin forceps. Valleylab Twin Pin J Heavy Duty Silicon Cable Fits bipolar pencils and USA-style two pin forceps - Trewavis Surgical, Valleylab, Conmed, Olsen, Kirwan, Codman. With Safety Hood * Contact us for other lead options available. 1.30

35 QUIVERS PRODUCT NUMBER LENGTH DESCRIPTION BASE STYLE G 200mm (8 ) Standard Screw Base H 300mm (12 ) Laparoscopic Screw Base O 350mm (14 ½ ) Laparoscopic Screw Base I 350mm (14 ½ ) Telescope Warming Screw Base (No drain holes) J 200mm (8 ) Standard Clip On Base P 400mm (16 ) Laparoscopic Screw Base Q 450mm (18 ) Laparoscopic Screw Base R 500mm (20 ) Laparoscopic Screw Base S 600mm (24 ) Laparoscopic Screw Base Quivers have stainless steel holding ring. Replacement Screw bases available. * Contact us for longer lengths 1.31

36 This page intentionally left blank

37 KIRSCHNER WIRES LENGTH POINT STYLE WIRE DIAMETER 0.7mm 0.8mm 0.9mm 1.0mm 1.1mm 1.2mm 1.4mm 1.6mm 2.0mm 2.4mm 2.5mm 2.8mm MM INCH Trocar/Trocar A B C D E F T G Trocar/Blunt A B C D E F T G Diamond/Diamond A B C D E F T G Diamond/Drill Shank A B C D E F T G Trocar/Trocar A B C D E F T G H I J K Trocar/Blunt A B C D E F T G H I J K Diamond/Diamond A B C D E F T G H I J K Diamond/Drill Shank A B C D E F T G H I J K Trocar/Trocar C D E F T G H I J K Trocar/Blunt C D E F T G H I J K Trocar/3 Sided Shank C D E F T G H I J K Diamond/Diamond C D E F T G H I J K STEINMANN PINS LENGTH POINT STYLE PIN DIAMETER 3.0mm 3.2mm 3.5mm 4.0mm 4.5mm 5.0mm MM INCH Trocar/Trocar L M N O P Q Trocar/3 Sided Shank L M N O P Q Diamond/Diamond L M N O P Q Surgical Implant Grade Stainless Steel to ASTM F138/ISO Packed in see-through packs of 10 Non-Sterile Other styles and sizes on request Wires and pins available in bulk Threaded wires available > 1.6mm Diameter Pins passivied to ASTM F Diamond/Drill Shank L M N O P Q ILYZAROV WIRES (without olive) Trocar / Trocar LENGTH POINT STYLE WIRE DIAMETER 1.8mm 2.00mm MM INCH Single D Point X Y Trocar / 3 Sided Shank Diamond / Diamond Diamond / Drill Shank Diamond / 3 Sided Drill Shank Trocar 3 Sided Shank Diamond Drill Shank 2.1

38 GUIDE WIRES LENGTH POINT STYLE WIRE DIAMETER 1.0mm 1.1mm 1.2mm 1.4mm 1.6mm 2.0mm 2.4mm MM INCH Trocar/Blunt D E F T G H I Blunt/Blunt D E F T G H I Trocar/Blunt D E F T G H I Blunt/Blunt D E F T G H I Trocar/Blunt D E F T G H I Blunt/Blunt D E F T G H I Trocar/Blunt D E F T G H I Blunt/Blunt D E F T G H I Trocar/Blunt D E F T G H I Blunt/Blunt D E F T G H I Threaded Guide Wires are available on wires with trocar points 1.6mm diameter and above in thread lengths of 5, 10 & 15mm. To order these, add desired thread length to end of product REF above, e.g G15 has 15mm thread. SWITCHING STICKS LENGTH POINT STYLE WIRE DIAMETER 3.0mm 3.2mm 3.5mm 4.0mm 4.5mm 5.0mm MM INCH Bullet/Bullet L M N O P Q Bullet/Bullet L M N O P Q CANNULATED SLEEVES Cannulated Sleeves to suit guide wires are available upon request. Packed in see-through packs of 10 Non-Sterile 2.2

39 KEON COHEN HEAVY DUTY RETRACTORS (Modified Gelpi Retractor) A (Left Hand) B (Right Hand) Recommended for use in almost any situation where the spinal canal is to be explored. Also suitable for use in shoulder, knee and hip surgery. Extended Keon Cohen Retractors ( F, G, J, K, R, S) suitable for bariatric patients. PRODUCT NUMBER DESCRIPTION LENGTH OPENING WIDTH REACH / DEPTH A Left Hand Standard Reach 200mm up to 90mm 50mm B Right Hand Standard Reach 200mm up to 90mm 50mm F Left Hand Extended Reach 200mm up to 90mm 80mm G Right Hand Extended Reach 200mm up to 90mm 80mm H Left Hand Standard Reach with Bone Spike 200mm up to 90mm 50mm I Right Hand Standard Reach with Bone Spike 200mm up to 90mm 50mm J Left Hand Extended Reach with Bone Spike 200mm up to 90mm 80mm K Right Hand Extended Reach with Bone Spike 200mm up to 90mm 80mm R Left Hand Long Reach - Bariatric Version 200mm up to 90mm 100mm S Right Hand Long Reach - Bariatric Version 200mm up to 90mm 100mm 3.1

40 KEON RETRACTOR These heavy duty retractors are especially designed for use in Orthopaedic and Neurological Surgery. Heavy Duty, Strong Retractors Locking Nut allows excellent control of retraction Left and Right Models available; can be purchased separately Rounded Tines designed to cause minimal tissue damage Designed in Australia by Trewavis Surgical PRODUCT NUMBER T U DESCRIPTION Left Hand 4 x 5 Prong Right Hand 4 x 5 Prong 3.2

41 FUKUDA RETRACTOR Used for retracting the humerus to expose the entire glenoid surface. PRODUCT NUMBER OVERALL LENGTH BLADE WIDTH OPENING D 215mm 32mm 26 x 42mm E 215mm 38mm 31 x 42mm HASSON S RECTRACTOR Small Large Used to facilitate the insertion of the Hasson obturator/cannula by retraction of the entry site. Sold in pairs PRODUCT NUMBER L M DESCRIPTION S Retractor Small S Retractor Large FITZPATRICK RECTRACTORS Used for Mouth Surgery PRODUCT NUMBER DESCRIPTION Set of 4 Retractors 3.3

42 This page intentionally left blank

43 RECTAL SUCTION BIOPSY TOOL (Includes Vacuum Gauge) This instrument has been specifically designed to provide rectal biopsy specimens for accurately establishing the presence of ganglion cells in the submucosal plexus. Replaceable Parts Operating Wire Cutter & Capsule (Set) Vacuum T Assembly 4.1

44 AREOLA MARKER (DOUBLE ENDED) A The ideal device for accurate nipple placement during breast reconstruction Made from high grade stainless steel for durability, ease of cleaning and sterilisation Serrated marking edges 20mm centre sighting hole 4.2

45 DOUBLE INSTRUMENT HOLDERS For Ring-Handled Instruments Designed to meet the new requirements of AS/NZS 4187:2003 Designed to suit Autoplas sterilization trays (will also fit other commonly used trays) 3 Sizes available 23.0cm Part No D 15.0cm Part No J 11.5cm Part No F At a glance, you can see that instruments are not on 1st ratchet Easy cleaning Dishwasher proof Instruments do not tangle, and large sets are easily handled by one person Spare Clips Part No E Part No H Part No G Part No I Single Clip to suit D and J Packet of 10 to suit D and J Single Clip to suit F Packet of 10 to suit F 4.3

46 INSTRUMENT REPAIR SERVICE Trewavis Surgical has one of the largest repair facilities in Australia with ISO certification. We have offered a trouble free repair and maintenance service for over 45 years. All work is fully guaranteed Repairs not proceeded with if an instrument deemed unsafe, or more economical to replace. Free Quote if required All types of Manufacturers Instruments repaired Price Competitive Our usual turnaround is 5-7 working days plus transit time, however if you have urgent repairs speak to us to arrange the repairs to suit your needs. All work is undertaken by highly skilled and trained personnel and all workmanship is fully guaranteed and price competitive. If you would like to try our services, please contact us on (03) Refer to our website for more details. 4.4

47 Are your Laparoscopic Needle Holders, Arthroscopy Punches or Graspers broken or worn out? Trewavis Surgical can now offer a total refurbishment that includes a brand new operating shaft, including jaws & cutting edges now for less than a quarter of the cost of a new instrument! Laparoscopic Needle Holder shaft 5mm Straight jaws, 300mm length Cigar Handle shaft Rotary 90 o Arthroscopy shaft Alligator Backbiter Duckbill Duckling Oval Punch Pitbull Scissors Scoop 4.5

48 CONDITIONS OF SALE 1. INTERPRETATION In these conditions and in any contract to which these conditions apply:- (a) the Seller means Trewavis Surgical Instruments Pty. Limited. (ABN ) or such company as accepts the Buyer s order. (b) the Buyer means the person who buys or has agreed to buy the Goods. (c) the Goods means any item of whatsoever nature which is sold repaired or maintained by the Seller. 2. GENERAL These Conditions apply to every sale made or agreed to be made by the Seller and no variation or abrogation of the same shall be effective unless it is evidenced in writing signed on behalf of the Seller. 3. PRICE (a) Unless previously withdrawn the Sellers quotations are open for acceptance within the period stated therein or, when no period is so stated, within thirty days only after its date. (b) Unless otherwise stated in the quotation or invoice the price of the Goods is for delivery ex works and includes the cost of basic packaging. (c) The Seller shall be entitled without notice to the Buyer to adjust the price of the Goods, whether before or after acceptance of the Goods, in the event of and to take account of any increase in the cost to the Seller of supplying the Goods as a result of increases in costs of transport or insurance, or in rates of any applicable taxes in respect of the supply of the Goods or ingredients thereof including any duty, charge or levy in respect of the export or import of Goods, or changes in the classification or value of Goods or ingredients for customs purposes, or any changes in applicable exchange rates or in the event of delays by the Buyer in providing any information or licences required by the Seller for the production, supply, despatch or delivery of the Goods, or any other impost arising after the sale. (d) An administration and/or delivery charge may be payable by the Buyer in respect of all contracts deemed by the Seller to be of small value. 4. PAYMENT (a) Unless otherwise agreed by the parties in writing payment of the price of the Goods and any administration charge shall be made within 30 days of the date of the Seller s invoice. (b) Time for payment of the price of the Goods shall be of the essence of the contract and if the Buyer fails to pay the price when due the Seller may treat the contract as repudiated by the Buyer or may, until payment in full is made, suspend delivery of the Goods the subject of the contract and any Goods the subject of any other contract with the Buyer without incurring any liability whatsoever to the Buyer in respect thereof. In addition, but without prejudice to such rights of the Seller, the Buyer shall (if so required by the Seller) pay interest to the Seller on the outstanding amount of the price at the rate of 3 per cent per annum above the indicator Lending Rate of National Australia Bank Limited ruling from time to time until the price is paid in full. (c) Notwithstanding any rights to lien to which the Seller may otherwise be entitled, the Seller shall have a specific lien (including a right of sale) over the Goods the subject of the contract and any Goods the subject of any other contract with the Buyer until the price of the Goods has been paid. The Buyer shall not be entitled to make any deduction from the price of the Goods in respect of any set-off or counterclaim. 5. DELIVERY (a) Any time or date named or accepted by the Seller for completion, delivery, despatch, shipment or arrival of the Goods or for tender of any documents is an estimate only and does not constitute a condition of the contract or part of the description of the Goods. The Seller shall not be under any liability whatsoever for the consequences of any delay as a result of any cause outside its reasonable control and, in particular, but without prejudice to the generality of the foregoing the Seller shall be under no liability whatsoever for the consequences of any delay in completion, delivery, despatch, shipment or arrival of the Goods or in the tender of any documents caused (directly or indirectly) by acts of God, war, riots, strikes, lockouts, trade disputes, fires, breakdowns, mechanical failures, interruption of transport, government action or by any other cause whatsoever whether or not of a like nature to those specified above, outside the reasonable control of Seller and in any such event the time for completion, delivery, despatch, shipment or arrival of the Goods or tender of documents may be extended by the Seller (or the Seller may cancel the contract without any liability whatsoever on its part). Time for completion, delivery, despatch, shipment or arrival of the Goods or for the tender of any documents is not of the essence of the contract. (b) In the event of production of the Goods or any part thereof being hindered or impaired or ceasing for any cause whatsoever outside the reasonable control of the Seller, the Seller may notify the Buyer that it is unable to fulfil the contract and may cancel the contract without any liability whatsoever. (c) Unless otherwise stated in writing the Seller may make partial deliveries or deliveries by instalments in any amounts it may determine and each such partial delivery or delivery by instalment shall be deemed to be separate contracts and these Conditions shall apply to each partial delivery or delivery by instalment. (d) The Seller may deliver up to five per cent more or less of the amount specified for delivery, subject only to an appropriate adjustment to the price payable, in full satisfaction of the Sellers obligations pursuant to the particular contract. (e) Where the Buyer requests a particular method of delivery then the Buyer shall cover the cost of delivery by that method from the point of despatch of the goods by the Seller. Otherwise the Seller may select the method of delivery and the Buyer shall bear such delivery costs. Goods sent for repair are to be freight prepaid. (f) The Seller is not responsible for any loss or damage to goods in transit. The Seller shall render the Buyer such assistance as may be necessary to press claims on carriers providing that the Buyer shall have notified the Seller and the carriers in writing immediately loss or damage is discovered on receipt of goods. 6. FAILURE TO DELIVER The Buyer shall notify the Seller within 7 days of delivery of any shortfall in, loss or damage to Goods delivered. Failure to so notify shall disentitle the Buyer to any remedy in respect of the shortage, loss or damage. 7. TITLE (a) Goods supplied by the Seller to the Buyer shall be at the Buyer s risk immediately on delivery to the Buyer or into the Buyer s custody (whichever is the sooner) and the Buyer should insure the Goods thereafter against such risks as it thinks appropriate. (b) Property in the Goods supplied by the Seller to the Buyer will not pass to the Buyer until such time as the Goods the subject of this contract and all other Goods supplied by the Seller to the Buyer have been paid for in full. Until such time as the Goods have been paid for in full the Buyer shall store the Goods, including Goods into which the supplied Goods have been mixed in such a manner as to show clearly that they are the property of the seller and shall upon the Seller s demand deliver up such Goods to the Seller and in default of such delivery the Seller may by its servants and agents enter the Buyer s premises at any time without notice to repossess the Goods. (c) Until such time as the Goods have been paid for in full the Buyer is at liberty to sell the Goods, including Goods into which the supplied Goods have been mixed, in the ordinary course of its business, as agent for the Seller and shall account to the Seller for the proceeds thereof. (d) The Buyer and the Seller agree that the provisions of this clause apply notwithstanding any arrangement between the parties under which the Seller grants the purchaser credit. 8. WARRANTY All Trewavis Surgical products are warranteed to be free of defects in the materials and workmanship. If any products are identified by the Buyer as being defective upon receipt, and such goods are returned and accepted by Trewavis as defective, they will be repaired or replaced free of charge, or credited against future purchases. The warranty does not apply to damage and/or misuse or abuse of the product. Warranty is void if any product has been altered in any manner, and/or if repair was done by someone other than a qualified Trewavis Surgical service representative. This warranty is expressly limited to the terms and conditions as stated above and there is no other implied or expressed warranty or guarantee. 9. EXCLUSION OF LIABILITY (a) Except as provided in these terms and conditions, all express and implied warranties, guarantees and conditions under statute or general law as to merchantability, description, quality, suitability or fitness of the goods for any purpose or as to design, materials or workmanship or otherwise are hereby expressly excluded and the Seller shall not be liable for physical or financial injury, loss or damage or for consequential loss or damage of any kind arising out of the supply, or use of the Goods or arising out of the Seller s negligence or in any way whatsoever. (b)the Sellers liability, if any, for a breach of a condition or warranty implied by Division 2 or Part V of the Trade Practices Act 1974 (if applicable, other than Section 69) is hereby limited to:- (1) in the case of goods, any one or more of the following:- (i) the replacement of the goods or the supply of equivalent goods; (ii) the payment of the cost of replacing the goods or of acquiring equivalent goods; (2) in the case of services:- (i) the supplying of the services again; or (ii) the payment of the cost of having the services supplied again. (c) The Seller s liability, if any, under Section 74H of the Trade Practices Act 1975 (if applicable) is expressly limited to: (1) the cost of replacing the goods; or (2)the cost of obtaining equivalent goods; or (3) the cost of repairing the goods whichever cost shall be the lesser. (d) Nothing in these conditions shall be read or applied so as to exclude, restrict or modify any condition, warranty, guarantee, right or remedy implied by law (including the Trade Practices Act 1974) and which by law cannot be excluded, restricted or modified. Where the Seller is liable under any such legislation which is not able to be negatived by clause 8(a) or by any other of these terms and conditions the Seller's liability for defective goods is restricted as set out in sub-clauses 8(b) and (c) or to the fullest extent otherwise permitted by law. (e) Unless otherwise agreed in writing the only warranty provided by the Seller in respect of Goods not manufactured by it is that (if any) provided by the manufacturer of the Goods and the liability of the Seller pursuant to such warranty is limited to any amount receivable by the Seller from the manufacturer. 10. LICENCES, DUTIES, ETC. The payment of any taxes and the obtaining and maintenance in full force and effect of any necessary export or import licences, authorisations or consents in respect of the Goods is the sole responsibility of the Buyer and the Seller shall be under no liability whatsoever in respect of Goods exported or imported without any necessary licences, authorisations or consents. 11. HEALTH AND SAFETY It is the Buyers responsibility to ensure that all applicable health and safety regulations are observed and other appropriate steps taken in relation to the storage, handling and use of the Goods and where information is supplied to the Buyer on potential hazards relating to the Goods to bring such information to the attention of its employees, agents, subcontractors, visitors and customers. Without prejudice to the foregoing, it is also the Buyers responsibility to provide safe facilities for the reception of the Goods into storage. 12. REPAIRS Trewavis Surgical is not responsible for damage to goods sent to Trewavis Surgical for repair or examination, nor for accidental damage to glass or other apparatus or delicate instruments in the course of the repair. Time involved in preliminary examination of an article may be charged in the event of an order not being placed. Goods sent for repair are to be freight prepaid and clearly labelled with the senders name and address and details of the work required. 13. RETURN OF GOODS POLICY Goods received as a result of Trewavis Surgical s error may be returned for repair, replacement or credit. Returns are to be freight prepaid. Goods will be considered non-returnable if: (a) Goods are held longer than 90 days. (b) Discontinued products. (c) Non-stock items (i.e. custom designed). (d) Goods not in, or accompanied by, original packaging. (e) Goods not in saleable condition due to no fault of Trewavis Surgical. Loan stock will be invoiced if: (a)the Goods are not returned within 30 days of issue, or the period stated on the Loan Docket. (b)the Goods are not in saleable condition when received by the Seller. (c)the Goods are not in, or accompanied by, the original packaging. Goods returned for credit may be subject to a restocking fee of up to 20%. 14. INDUSTRIAL PROPERTY RIGHTS The Buyer shall not alter remove or in any way tamper with any of the trade or other marks or numbers of the Seller attached to or placed upon the Goods. 15. INDEMNITY The Buyer will indemnify the Seller against all damages, penalties, costs and expenses to which the Seller may become liable as a result of work done in accordance with the Buyer s specifications which involves the infringement of any letters patent or registered designs. 16. NOTICES Any notice to be given to the Buyer shall be deemed to be given upon its being posted or sent by facsimile or to the address of the Buyer set out in the contract or to the Buyers registered office or to the Buyers last known address. 17. ASSIGNMENT The Buyer may not assign or transfer or purport to assign or transfer any of its rights or obligations under or in connection with the contract to any other person whatsoever. 18. SUB-CONTRACTS The Seller reserves the right to sub-contract the performance of any contract or any part thereof to any other person party or person it may determine. 19. PROPER LAW AND JURISDICTION All contracts made between the Seller and the Buyer shall be governed by and construed in accordance with the laws of Victoria. The Buyer agrees to submit to the non-exclusive jurisdiction of the Victorian courts for all purposes of or in connection with such contracts. 20. HEADINGS The headings of these Conditions are provided for convenience only and shall have no effect on the interpretation thereof. 5.1