Effective Date: not available -Rev. 11/20/2012- Void After: Product: Stainless Steel Industrial/Commercial Sinks File No. 5531

Transcription

1 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the requirements of applicable codes and standards. This activity is coupled with periodic surveillance of the supplier's factory and warehouses as well as the assessment of the supplier's Quality Assurance System. This listing is subject to the conditions set forth in the characteristics below and is not to be construed as any recommendation, assurance or guarantee by IAPMO Research and Testing, Inc. of the product acceptance by Authorities Having Jurisdiction. The most updated information on this Certificate of Listing is available online at pld.iapmo.org Effective Date: not available -Rev. 11/20/ Kindred Road Midland, ON L4R 4K9 Canada Identification: Each fixture shall be permanently and legibly marked with the listee's name or trademark, or in the case of private labeling, the name or trademark of the additional company for whom the fixture was manufactured. The product shall also bear the cupc certification mark. Characteristics: Stainless steel plumbing fixture to be installed in accordance with the manufacturer's installation instructions and the requirements of the latest edition of the Uniform Plumbing Code. Fixtures may include laboratory, service, institutional, scullery, and sacrarium sinks. Products listed on this certificate have been tested by an IAPMO R&T recognized laboratory. This recognition has been granted based upon the laboratory's compliance to the applicable requirements of ISO/IEC Products are in compliance with the following code(s): Uniform Plumbing Code (UPC ) National Plumbing Code of Canada This listing period is based upon the last date of the month indicated on the Effective Date and Void After Date shown above. Any change in material, manufacturing process, marking or design without having first obtained the approval of the Product Certification Committee, or any evidence of non-compliance with applicable codes and standards or of inferior workmanship, may be deemed sufficient cause for revocation of this listing. Production of or reference to this form for advertising purposes may be made only by specific written permission of IAPMO Research and Testing, Inc. Any alteration of this certificate could be grounds for revocation of the listing. This document shall be reproduced in its entirety.

2 International Plumbing Code (IPC ) Products are in compliance with the following standard(s): ASME A /CSA B (R2013) including Update No. 2 dated March 2011

3 MODELS: HDDF1818-FM Drinking Fountain HDDF1818-RM ADA Drinking Fountain HDSB1418-FM Security Basin HDSB1318-RM - Security Basin AHDSB1918-RM ADA Security Basin AHDSB1918-FM ADA Security Basin HDPWB1518 Public Use Basin HDWSS1821-RM Service Sink HDWSS2021-FM - Service Sink HDFSS1821-RM Service Sink HDFSS2021-FM - Service Sink LABORATORY TYPE 316 OC6/316 RC5/316 SL2424/316 SL2424/316 SL2448/316 SL2448/316 DL2448/316 DL2448/316 TL2454/316 TL2454/316 TL2472/316 TL2472/316 ART36/316 ART/316-3C ART48/316 ART48/316-3C ART60/316 ART60/316-3C WHB1617/316 WHB1819/316 WHBS181910/316 LBD6410/316 LBSDBR6810/316P LBSDBL6810/316P SCULLERY SINKS SL2424 SL2424 SL2448 SL2448 SL2454 SL2454 TL2472 Page 3 of 9

4 TL2472 SSL2424 SSL2424R SSL2424L SSL2424LR SSL2430 SSL2436 SDL2430 SDL2436 SDL2442 SDL2442LR SDL2448 SDL2448LR STL2445 STL2454 STL2472 RSL2418 RSL2418R RSL2418L RSL2418LR RDL2436 RDL2436R RDL2436L RDL2436LR RTL2454 RTL2454R RTL2454L RTL2454LR WSL2424 WSL2424R WSL2424L WSL2424LR WSL2430 WSL2436 WDL2448 WDL2448R WDL2448L WDL2448LR WDL2460 WDL2472 WTL2445 WTL2454 WTL2472 WTL2472R WTL2472L WTL2472LR SURGICAL SCRUB UPS Page 4 of 9

5 SSU1 SSU2 SSU3 SSU SSU SSU INSTITUTIONAL SINKS ART36 ART36-3C ART48 ART48-3C ART48-3END ART60 ART60-3C AWHB1414-3MOD BCS6713 Cu-AS6405P-3 Cu-HWS1518P-3 Cu-HWS1616P-3 Cu-UCS4610P-3 FSS222210/316 FSS222210/316 FSSL223410/316 FSSO22210/316 FSSOL223410/316 FSSOR223410/316 FSSR223410/316 FWHB1819 HWS1414P HWS1420P HWS1518P PWS1633 WHB1616 WHB1617 WHB1617 WHB1617 WHB1819 WHB1819 WHB1819 WHB2221 WHBS WHBS161709/316-3 WHBS161709/316-7 WHBS WHBS WHBS WSS6713 Page 5 of 9

6 WT3103 WT400C WT500C WT600C WTS2025 WTS2031 WTS2036 WTS2048 WTS2060 WTS2072 WTS2096 WTS36-1 WTS36-3 WTS48-1 WTS48-3 WTS60-1 WTS60-3 WTS72 WTS72 SEWAGE SAMPLING STATION SSS1827 SSS1827SDSL SSS1827SDSR SSS1827DDS SACARIUM SINKS RS14/V16 SS9126 DRAINER BOARD SINKS LBSDBR6408P LBSDBL6408P LBSDBR6810P LBSDBL6810P LBDDBR6408P LBDDBL6408P LBDDBL6407 LBDDBR6407 LBSDBL6407 LBSDBR6407 Custom Part Nomenclature Guide The following guide lists iterations of custom produced product. Please note the maximum bowl size is: Front to Back is 24" Page 6 of 9

7 Left to Right is 93" Max Depth is 14". Drainboard Sinks LBSDBR - Ledge back single with drainboard on right side LBSDBL - Ledge back single with drainboard on left side LBSDBRL Ledge back Sinkg with left and righthand drainboard LBDDBR - Ledge back double with drainboard on right side LBDDBL - Ledge back double with drainboard on left side LBDDBRL Ledgeback double with left and right drainboards i.e. LBSDBR Scullery Sinks SL- Classic Series, single compartment SLDBR single compartment righthand drainboard SLDBL single compartment lefthand drainboard SLDBRL single compartment left and righthand drainboard LBSL single scullery sink with faucet ledge DL - Classic Series, double compartment DLDBR - double compartment righthand drainboard DLDBL double compartment lefthand drainboard DLDBRL double compartment left and righthand drainboad LBDL double scullery sink with ledgeback TL - Classic Series, triple compartment TLDBL triple compartment lefthand drainboard TLDBR triple compartment righthand drainboard TLDBRL- triple compartment with left and righthand drainboard LBTL triple compartment with faucet ledge SSL- S-Series, single compartment SDL - S-Series, double compartment STL -S-Series, triple compartment RSL- R-Series, single compartment RDL- R-Series, double compartment RTL- R-Series, triple compartment WSL- W-Series, single compartment WDL- W-Series, double compartment WTL- W-Series, triple compartment i.e. SLXXYYDD can be identified as SL Classroom Sinks LBLS - Ledge back & left, single compartment Page 7 of 9

8 ALBLS - Wheelchair accessible/ada compliant ledge back & left single compartment LBRS - Ledge back & right, single compartment ALBRS- Wheelchair accessible/ada compliant ledge back & right, single compartment LBLRS - Ledge back, left & right, single compartment ALBLRS - Wheelchair accessible/ada compliant, ledge back, left & right, single compartment LHS - Opposing ledges, left & right only, single compartment ALHS - Wheelchair accessible/ada compliant, opposing ledges, left & right only, single compartment LRS - Ledge right side only, single compartment ALRS - Wheelchair accessible/ada compliant, ledge right side only,single compartment i.e. LBRSXXYYDD can be identified as LBRS Drop-in Sinks S - Single sink without faucet ledge AS - Wheelchair accessible/ada compliant single sink without faucet ledge LBS - Ledge back single sink ALBS- Wheelchair accessible/ada compliant ledge back single sink D - Double sink without faucet ledge LBD - Ledge back double sink ALBD - Wheelchair accessible/ada compliant ledge back double sink T -Triple sink without faucet ledge LBT - Ledge back triple sink LBDC Combination Double Ledgeback Sink i.e. LBSXXYYDD can be identified as LBS Countertops i.e. T624602SL T Top 6 Alloy 6 for T316 4 for T Countertop OD Front to Back 60 Countertop OD Left to Right 2 Number of bowls S Splash L type L(legs) or W (wallmount) or C(coutnermount) Other UCS - Undermount single sink UCD - Undermount double sink UCT - SSU1 - Surgical scrub station single SSU2 - Surgical scrub station double Page 8 of 9

9 SSU3 - Surgical scrub station triple WHB - Wall hung hand wash basin FWHB - Pedestal hand wash basin WSS - Wall hung service sink BCS - Base cabinet service sink WTS - Wall trough sink WTSL Wall trough with Backledge FSS - Floor service/mop sink SSS - Sewage sampling sink RS/SS - Sacrarium sink i.e. UCSXXYYDD can be identified as UCS Suffix Guide /2" waste /2" waste /4" waste /2" waste with standpipe and guard /2" waste with overflow /4" waste with overflow /4" waste with overflow and strainer /316 Type 316 material - MW modified waste i.e. non-removable grid -APR shroud or apron -P 18 gauge material -HD 16 gauge material /1 1 hole /2 2 hole /3 3 hole /4 4 hole Page 9 of 9