Schlegel Restrictors: heavy duty, standard and fall prevention compliance TRUSTED QUALITY & COMMITMENT

Schlegel Restrictors: heavy duty, standard and fall prevention compliance TRUSTED QUALITY & COMMITMENT

TM SafeGard fall prevention: market leading casement window restrictor It is critical in today s building projects to be able to safely and securely operate a window that prevents accidental falls through open windows. The Amesbury Truth SafeGard TM control device meets stringent safety requirements. It is tested and certified to meet the requirements of ASTM F2090-10. It is within AS 5203, BCA, National Construction Code (NCC) and the NSW strata properties legislation specifications as follows. Tested to withstand 250 newton force (AS 5203, NCC requirement) Tested to restrict less than 101.6mm in initial operation (AS 5203, NCC 125mm or less) Can be opened further for egress purposes in case of an emergency (NSW Strata legislation) Automatic re-latch to less than 101.6mm when fully closed The additional operation can be performed without the use of keys, tools or special knowledge. Specified and tested to address the risk of accidental falls by children five years old and younger Tested to 4000 cycles Reliable, easy to install and easy to operate The track self locates to the frame Made entirely of austenitic stainless steel with Delrin (plastic) cover and track For casement windows Protected under the terms of the Truth warranty Installation & Ordering Designed for factory installation as well as field application by trained personnel. Before installation please consult with local building codes. This device is not designed for awning applications Code Description 14151 WOCD ASSY, FIELD KIT Left Hand (SafeGard) 14152 WOCD ASSY, FIELD KIT Right Hand (SafeGard) Contents arm assy, track assy, template, instruction and std screw pack (4 screws), window label

www.schlegel.com 3

4 www.schlegel.com

www.schlegel.com 5

6 www.schlegel.com

Possible Fall Hazard www.schlegel.com 7

Amesbury Truth Control Devices: awning and casement Friction Adjustors This mechanism automatically stops the vent at a safety position as required by the user or required law. By tightening a screw in the sliding brass shoe a homeowner can easily adjust the tension required to open the window. A key may be used to release the window to its maximum opening for cleaning and ease of window assembly. Limit Devices When properly installed and operated, the limit device will help prevent damage to casement and awning windows under high winds in high-rise applications. Two different methods of disconnecting the limit device from the sash for cleaning purposes: either by inserting a key, or by operating the detach clip. A variety of track and arm lengths are available for this product. Please contact Schlegel. Support Arms Designed for use on top-hung windows. Two support arm models are available: - The first opens to full extension and automatically locks into place for ventilation or window maintenance. - The second is designed to extend only 38.1mm at first-position opening. A key can be inserted to release the arms to achieve its maximum open position for window maintenance. Code Description Track Length mm NS 37.36.00.100 Standard friction adjustor (ADJUSTER,FRICTION,255MM,STAN) 254 NS 37.42.00.100 Heavy duty friction adjustor (HD FRIC, FA33SS 12 W/.235 B) 304.8 NS 37.43.00.100 Heavy duty friction adjustor (HD FRIC, FA33SS 14 W/.235 B) 355.6 NS 37.26.00.200 Limit device with key release (LIMIT DEV,FA220SS, 5 TK 5 B) 127 NS 99.20.00.001 Limit device (LIMIT STOP, DEV W/SCREWS CB) NS 37.10.00.103 Support Arm 10 (88SS W/.235 BKTS) 254 *Bar length is always 50.8mm shorter than track length. Heavy Duty Friction Adjustors have different bracket heights. *Please contact Schlegel for more information 8 www.schlegel.com

www.schlegel.com 9

10 www.schlegel.com

www.schlegel.com 11

12 www.schlegel.com

It s better to be safe www.schlegel.com 13

Head Office: 44 Riverside Road Chipping Norton NSW 2170 Ph: +61 2 8707 2000 Fax: +61 2 8707 2070 Email: salesnsw@schlegel.com Victoria: Factory 16 / 2-4 Damian Court Dandenong VIC 3175 Ph: +61 3 9793 4100 Fax: +61 3 9793 4566 Email: salesvic@schlegel.com Queensland: 2 / 17 Lawrence Drive Nerang QLD 4211 Ph: +61 7 5527 3999 Fax: +61 7 5527 3393 Email: salesqld@schlegel.com Western Australia: 3 / 45 Truganina Road Malaga WA 6090 Ph: +61 8 9248 4500 Fax: +61 8 9248 4855 Email: saleswa@schlegel.com New Zealand: Burrett Business Park, 10d Burrett Ave Penrose, Auckland 1061 Ph: +64 9 478 4001 Fax: +64 9 478 4002 Email: salesnz@schlegel.com Care has been taken to ensure that the contents of this publication are accurate, but Schlegel and its subsidiary companies do not accept responsibility for errors or for information that is found to be misleading. Suggestions for, or description of, the end use or application of products or methods of working are for information only. All dimensions are in mm and are nominal. Schlegel reserve the right to change specification without prior notice. Schlegel s names and logos and all related trademarks (including SCHLEGEL, SCHLEGEL Red Square Logo, Red Square Logo, trade names, and other intellectual property are the property of Schlegel Acquisition Holdings Limited trading as Schlegel International and cannot be used without its express prior written permission. All rights reserved. Schlegel Acquisition Holdings Limited trading as Schlegel International 2016. www.schlegel.com Oct 16 V1 R