10ft Outdoor Kit 04 TK-ODK-04 The Zoom 10ft square tent with custom printed canopy & two printed half-walls creates a semi-enclosed space. Two 13ft Zoom straight banners with ground spikes & double-sided graphics elevates your brand over the crowd. Two counters, covered with stretch fitted fabric graphics, double as shipping cases. features and benefits: - Zoom Tent with custom printed canopy - 2 - Half wall hardware sets with printed graphics - 2 - Zoom 4 hardware with ground spike & double-sided graphics (straight) dimensions: Hardware Zoom Tent Assembled Unit: 115 w x 135.43 h (per side) 2921mm(w) x 3439.92mm(h) Half Wall Assembled Unit (each): 112 w x 31 h 2844.8mm(w) x 787.4mm(h) Zoom 4 Straight Assembled Unit: 40 w x 168.5 h x 31.5 d 1016mm(w) x 4280mm(h) x 800.1mm(d) OCE Case to Counter Assembled Unit (each): 38 l x 14 h x 11 approx. 965mm(l) x 356mm(w) x 279mm(h) - 2 - OCE shipping cases - 2 - OCE stretch wraps - Products and graphics included in each kit are limited to their own specific warranties; see individual instructions Graphic Refer to related graphic templates for more information Please be sure to include a 2 bleed around the perimeter We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications. Shipping Shipping dimensions: (First OCE) 17 l x 17 w x 66 h 431.8mm(l) x 431.8mm(w) x 1,676.4mm(h) Shipping weight: 72 lbs / 32.66 kg Shipping dimensions: (Second OCE) 17 l x 17 w x 63 h 431.8mm(l) x 431.8mm(w) x 1,600.2mm(h) Shipping weight: 42 lbs / 19.05 kg additional information: Graphic Material: Zoom Tent - 6.5oz Outdoor Canvas Half Walls - 6.5oz Outdoor Canvas Zoom 4-13oz Scrim Case to Counter - Power Stretch *Refer to individual product instructions for specific warranties *See second page for recommended packing 07/01/13
Packing Instructions OCE #1 Place the Zoom Tent frame inside the OCE Insert the Zoom Tent canopy along Place the Zoom Tent half wall graphic Insert the Zoom 4 straight graphic along 1 the side of the Zoom Tent frame 2 on top of the Zoom Tent canopy 3 the front of the Zoom Tent frame 4 OCE #2 Place the Zoom Tent half wall kit into the OCE along the back Place the Zoom 4 straight hardware side Insert OCE stretch wrap in front of 1 by side with the Zoom Tent half wall kit 2 the Zoom Tent half wall kit 3 Add filler paper 4
Zoom Tent Setup Remove from bag Extend frame to extended 1 Place feet on stable ground 2 size of 4 x 4 3 Lay canopy over top of frame 4 Align the canopy top over the frame corners and place Velcro on all 4 corners (none on top piece) Make sure canopy is flush 6 Lift inside pole in center to 5 extend frame completely 7 8 on hardware Secure top with tabs Lift the 2 adjacent outer legs and slide out the inner legs until the snap button locks into the hole in the outer leg 9 Repeat on opposite legs; Make sure to do two legs at a time. *Minimum of Spin winder in the center of the two people recommended. frame to completely tighten tent 11 Canopy kit assembled 12 10
Fullwall Setup Halfwall Setup Apply fullwall to top Velcro strip inside canopy 1 Secure to side poles with Velcro strips (x4 per pole) 2 Fullwall application is complete 3 Attach one halfwall bracket to one tent pole 1 Apply halfwall panel on provided halfwall pole 2 Attach second halfwall bracket to opposite tent pole 3 Attach each side of pole to pole collar; Secure with Velcro strip (x3) 4 Halfwall application is complete 5 90 day warranty 90 day warranty Optional set of four (22 lb ea.) steel weighted bases available *Caution: do NOT pack inside rolling bag or case* Optional set of 4 pegs and 3.5 meter guy ropes
SET-UP Feed the antenne through pocket Unfold the stand. 1 Assemble bungee pole. 2 Place antenne into top of pole. 3 that runs along side the graphic. 4 Once graphic is applied, place pole on stand. Secure graphic to pole by threading Attach bungee cord to the hook on 5 the bungee through the grommet. 6 pole to hold graphic in place. 7 unit is complete 8 ADDITIONAL BASE OPTIONS Ground Spike Vehicle Base Auger Base Donut Water Fillable Base Insert zoom pole and drive over pronged base. Push thumb into thumbholes on red handles to extend.
Case Conversion Assembly 1 2 3 4 Make sure case is set on the lowest notch Pull over stretch wrap graphic Make sure edges of the graphic match up with the edges of the case 5 Setup is complete