2250 L-R Wall System. Optional Features Two color capability Project specific U-factors (See Thermal Charts)

Transcription

1 NOVEMER, EC - L-R Wall System FETURES Features Economical -/" sight line " infill system has " or -/" depth members /" infill system has -/" or -/" depth members Outside glazed SSG option for vertical mullions Thermal break via polymer glazing clip Permanodic TM anodized finishes in seven choices Painted finishes in standard and custom choices Optional Features Two color capability Project specific U-factors (See Thermal Charts) Product pplications Low-rise curtain wall applications of four stories or less Punched opening or ribbon window applications Integrated entrance framing allowing Kawneer entrances or other specialty entrances to be included Integrates with GLSSvent TM windows for curtain wall Kawneer Company, Inc., For specific product applications, Consult your Kawneer representative. DMDEN

2 L-R Wall System LNK PGE NOVEMER, EC - Kawneer Company, Inc., DMDEN

3 NOVEMER, EC - L-R Wall System INDEX rchitects Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified to expand design flexibility. Please contact your Kawneer representative for further assistance. PICTORIL VIEW... / SIZE DETILS (" SYSTEM)..., / SIZE DETILS (/" SYSTEM)..., NCHORING... WIND LOD CHRTS... - DEDLOD CHRTS... - THERML CHRTS... - Kawneer Company, Inc., LWS ND UILDING ND SFETY CODES GOVERNING THE DESIGN ND USE OF GLZED ENTRNCE, WINDOW, ND CURTIN WLL PRODUCTS VRY WIDELY. KWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURTIONS, OPERTING HRDWRE, OR GLZING MTERILS, ND SSUMES NO RESPONSIILITY THEREFOR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. The following metric (SI ) units are found in these details: m meter cm centimeter mm millimeter s second Pa pascal MPa megapascal DMDEN

4 L-R Wall System LNK PGE NOVEMER, EC - Kawneer Company, Inc., DMDEN

5 NOVEMER, EC - L-R Wall System PICTORIL VIEW Kawneer Company, Inc., DMDEN

6 L-R Wall System / SIZE DETILS (" SYSTEM) dditional information and CD details are available at www. NOVEMER, EC - ELEVTION IS NUMER KEYED TO DETILS -/" (.) " () -/" (.) " " () () -/" -/" (.) (.) -/" -/" (.) SSG MULLION (.) Structural Silicone Sealant (by Others)* Kawneer Company, Inc., -/" (.) SSG MULLIONS * INSTLLER NOTE: Installer is responsible for all required compatibility review and approvals with the Structural Silicone Manufacturer and the Insulated Glass Unit Manufacturers. DMDEN

7 NOVEMER, EC - L-R Wall System / SIZE DETILS (" SYSTEM) dditional information and CD details are available at www. SECTIONS RE NUMER KEYED TO ELEVTION ON PGE. -/" (.) -/" (.) /" (.) -/" (.) -/" (.) -/" -/" (.) (.) -/" (.) Kawneer Company, Inc., -/" (.) " () -/" (.) -/" (.) DMDEN

8 L-R Wall System / SIZE DETILS (/" SYSTEM) dditional information and CD details are available at www. NOVEMER, EC - ELEVTION IS NUMER KEYED TO DETILS -/" (.) -/" () -/" (.) -/" (.) -/" () -/" (.) -/" Structural Silicone Sealant (by Others)* (.) SSG MULLIONS Kawneer Company, Inc., * INSTLLER NOTE: Installer is responsible for all required compatibility review and approvals with the Structural Silicone Manufacturer and the Insulated Glass Unit Manufacturers. DMDEN

9 NOVEMER, EC - L-R Wall System / SIZE DETILS (/" SYSTEM) dditional information and CD details are available at www. SECTIONS RE NUMER KEYED TO ELEVTION ON PGE. -/" (.) " (.) -/" (.) " (.) Kawneer Company, Inc., -/" (.) -/" () -/" (.) /" (.) -/" (.) -/" (.) DMDEN

10 L-R Wall System NCHORING NOVEMER, EC - Kawneer Company, Inc., DMDEN

11 NOVEMER, EC - L-R Wall System WIND LOD / DED LOD CHRTS WIND LOD CHRTS Mullions are designed for deflection limitations in accordance with M TIR- of L/ up to '-" and L/ +/" above '-". These curves are for mullions WITH HORIZONTLS and are based on engineering calculations for stress and deflection. llowable wind load stress for LUMINUM, psi ( MPa), STEEL, psi ( MPa). Charted curves, in all cases are for the limiting value. Wind load charts contained herein are based upon nominal wind load utilized in allowable stress design. conversion from Load Resistance Factor Design (LRFD) is provided. To convert ultimate wind loads to nominal loads, multiply ultimate wind loads by a factor of. per SCE/SEI. / increase in allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact your Kawneer representative for additional information. DEDLOD CHRTS Horizontal or deadload limitations are based upon /" (.) maximum deflection at the center of an intermediate horizontal member. The accompanying charts are calculated for /" (.) and " (.) thick glass supported on two setting blocks placed at the loading points shown. Kawneer Company, Inc., DMDEN

12 L-R Wall System SINGLE SPN WIND LOD CHRTS NOVEMER, EC - WITH HORIZONTLS llowable Stress Design Load LRFD Ultimate Design Load = PSF () PSF () = PSF () PSF () C = PSF () PSF () D = PSF () PSF () E = PSF () PSF () WITH HORIZONTLS MULLION HEIGHT IN FEET C D E MULLION CENTERS IN FEET Mullion I =. (. x ) S =. (. x ) Steel I =. (. x ) S =. (. x ) MULLION HEIGHT IN FEET C D E MULLION CENTERS IN FEET Mullion with Steel MULLION HEIGHT IN FEET C D E WITH HORIZONTLS MULLION CENTERS IN FEET Mullion I =.(. x ) S =.(. x ) Steel I =. (. x ) S =. (. x ) MULLION HEIGHT IN FEET WITH HORIZONTLS C D E MULLION CENTERS IN FEET Mullion with Steel Kawneer Company, Inc., DMDEN

13 NOVEMER, EC - L-R Wall System SINGLE SPN WIND LOD CHRTS MULLION HEIGHT IN FEET WITH HORIZONTLS C D E MULLION CENTERS IN FEET Mullion llowable Stress Design Load LRFD Ultimate Design Load = PSF () PSF () = PSF () PSF () C = PSF () PSF () D = PSF () PSF () E = PSF () PSF () I =. (. x ) S =. (. x ) Steel I =. (. x ) S =. (. x ) MULLION HEIGHT IN FEET WITH HORIZONTLS E D C MULLION CENTERS IN FEET Mullion with Steel Kawneer Company, Inc., MULLION HEIGHT IN FEET WITH HORIZONTLS C D E I =. (. x ) S =. (. x ) MULLION HEIGHT IN FEET WITHOUT HORIZONTLS C D E MULLION CENTERS IN FEET MULLION CENTERS IN FEET DMDEN

14 L-R Wall System SINGLE SPN WIND LOD CHRTS NOVEMER, EC - MULLION HEIGHT IN FEET C D E WITH HORIZONTLS MULLION CENTERS IN FEET llowable Stress Design Load LRFD Ultimate Design Load = PSF () PSF () = PSF () PSF () C = PSF () PSF () D = PSF () PSF () E = PSF () PSF () I =. (. x ) S =. (. x ) MULLION HEIGHT IN FEET WITHOUT HORIZONTLS C D E MULLION CENTERS IN FEET MULLION HEIGHT IN FEET WITH HORIZONTLS C D E I =. (. x ) S =. (. x ) MULLION HEIGHT IN FEET WITHOUT HORIZONTLS C D E Kawneer Company, Inc., MULLION CENTERS IN FEET MULLION CENTERS IN FEET DMDEN

15 NOVEMER, EC - L-R Wall System DEDLOD CHRTS = / POINT LODING = / POINT LODING GLSS HEIGHT IN FEET " GLSS I =. (. x ) S =. (. x ) GLSS HEIGHT IN FEET /" GLSS I =. (. x ) S =. (. x ) SPN IN FEET SPN IN FEET Kawneer Company, Inc., GLSS HEIGHT IN FEET " GLSS I =. (. x ) S =. (. x ) I =. (. x ) S =. (. x ) GLSS HEIGHT IN FEET /" GLSS SPN IN FEET SPN IN FEET DMDEN

16 L-R Wall System DEDLOD CHRTS NOVEMER, EC - = / POINT LODING = / POINT LODING " GLSS GLSS HEIGHT IN FEET SPN IN FEET " GLSS GLSS HEIGHT IN FEET with DPTER with DPTER Kawneer Company, Inc., SPN IN FEET DMDEN

17 NOVEMER, EC - L-R Wall System THERML CHRTS Project Specific U-Factor Example Calculation (ased on single bay of Curtain Wall/Window Wall) -/" '-" '-" '-" '-" '-" D.L.O. D.L.O. D.L.O. D.L.O. SPNDREL VISION VISION SPNDREL TYPICL -/" TYPICL '-" D.L.O. VISION Kawneer Company, Inc., Vision rea '-" Example Glass U-Factor =. tu/(ft x h x F) Vision rea Total rea (Vision) Percent of Vision Glass Spandrel rea Example Spandrel R-value Spandrel rea Total rea Spandrel Percent of Spandrel D.L.O. = ( + + ) =. ft = ' -/"(' -/" + ' -/" + ' -/") =. ft = (Vision rea Total rea) = (..) = % = (ft x h x F)/tu = ( + ) =. ft = ' -/"(' -/" + ' -/") =. ft = (Spandrel rea Total rea) = (..) = % DMDEN

18 L-R Wall System THERML CHRTS NOVEMER, EC - Vision rea Chart COG U-factor % System U-factor vs Percent of Vision rea EXMPLE (NOT FOR DESIGN) Vision rea /Total rea (%) tu Ih ft F System U-factor ased on a single curtain wall bay of % vision glass and center of glass U-factor of.,system U-factor is equal to. tu/(h ft F) Spandrel rea Chart Spandrel R-value.... System U-factor vs Percent of Spandrel rea % EXMPLE (NOT FOR DESIGN) Spandrel rea /Total rea (%) ased on a single curtain wall bay of % spandrel and center of spandrel R-value of, system U-factor is equal to. tu/(h ft F).... tu Ih ft F System U-factor Kawneer Company, Inc., DMDEN

19 NOVEMER, EC - L-R Wall System THERML CHRTS Note: Values in parentheses are metric. COG = Center Of Glass. Charts are generated per M. System U-Factors for Vision Glass.. (.) COG U-factor. (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.) tu hr ft F (.) (.) (.) (.) (.) (.) (.) W m C System U-factor. Vision rea /Total rea (%) Kawneer Company, Inc., Spandrel R-Value. (.). (.). (.). (.). (.) System U-Factors for Spandrel Glass tu hr ft F (.) (.) (.) (.) (.) (.) (.) W m C System U-factor. (.).. (.). (.). Spandrel rea /Total rea (%) (.) DMDEN

20 L-R Wall System THERML CHRTS NOVEMER, EC - COG SHGC System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision rea System SHGC Vision rea /Total rea (%) Charts are generated per M. COG VT System Visible Transmittance (VT) vs Percent of Vision rea System VT Kawneer Company, Inc.,. Vision rea /Total rea (%) Charts are generated per M. DMDEN

21 NOVEMER, EC - L-R Wall System THERML PERFORMNCE MTRIX (NFRC SIZE) Thermal Transmittance (TU/hr ft F) FCTORS FOR CPTURED MULLIONS Glass U-Factor Overall U-Factor NOTE: For glass values that are not listed, linear interpolation is permitted.. U-Factors are determined in accordance with NFRC.. SHGC and VT values are determined in accordance with NFRC.. Glass properties are based on center of glass values and are obtained from your glass supplier.. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of, mm wide by, mm high (-/" by -/"). Kawneer Company, Inc., SHGC Matrix Visible Transmittance Glass SHGC Overall SHGC Glass VT Overall VT DMDEN

22 L-R Wall System THERML CHRTS NOVEMER, EC - Note: Values in parentheses are metric. COG = Center Of Glass. Charts are generated per M. System U-Factors for SSG Vision Glass.. (.) COG U-factor. (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.). (.) tu hr ft F (.) (.) (.) (.) (.) (.) (.) W m C System U-factor. Vision rea /Total rea (%) Spandrel R-Value. (.). (.). (.). (.). (.) System U-Factors for SSG Spandrel Glass tu hr ft F (.) (.) (.) (.) (.) (.) (.) W m C System U-factor Kawneer Company, Inc.,. (.).. (.). (.). Spandrel rea /Total rea (%) (.) DMDEN

23 NOVEMER, EC - L-R Wall System THERML CHRTS COG SHGC System Solar Heat Gain Coefficient (SHGC) vs Percent of SSG Vision rea Vision rea /Total rea (%) System SHGC Charts are generated per M. COG VT System Visible Transmittance (VT) vs Percent of SSG Vision rea. Kawneer Company, Inc., System VT. Vision rea /Total rea (%) Charts are generated per M. DMDEN

24 L-R Wall System THERML PERFORMNCE MTRIX (NFRC SIZE) NOVEMER, EC - Thermal Transmittance (TU/hr ft F) FCTORS FOR SSG MULLIONS Glass U-Factor Overall U-Factor NOTE: For glass values that are not listed, linear interpolation is permitted.. U-Factors are determined in accordance with NFRC.. SHGC and VT values are determined in accordance with NFRC.. Glass properties are based on center of glass values and are obtained from your glass supplier.. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of, mm wide by, mm high (-/" by -/"). SHGC Matrix Visible Transmittance Glass SHGC Overall SHGC Glass VT Overall VT Kawneer Company, Inc., DMDEN