decorative columns and brackets range

Transcription

1 decorative columns and brackets range

2 02 From decorative styles that enhance or standard styles to discreetly blend in, the Holophane columns and brackets range has been exclusively designed to complement our extensive luminaire range. The entire range has been designed in accordance with EN40 to give you the confidence of design you would expect from Holophane. noah rohan With a decorative range that consists of four carefully crafted styles in three different heights (5m, 6m & 8 metres) you can be sure that combining these with the striking designs of our luminaires is unsurpassed in meeting modern lighting criteria.

3 03 decorative columns and brackets range isobel dominic

4 04 noah rohan

5 05 isobel dominic

6 06 noah isobel rohan Holophane decorative conical steel columns 8m 7m 6m 5m 4m 3m 2m 1m bracket isobel dominic isobel rohan luminaire QSM QSS vista junior seattle street

7 07 dominic Suitable for these Holophane luminaires: QSM petxina QSS vista seattle street urbandeco signature II vista junior denver pole noah noah dominic isobel rohan bracket vista signature II denver pole urbandeco petxina luminaire

8 08

9 ordering details 09

10 10 ordering Holophane decorative conical steel columns Code DPSDC VSTDC PETDC QSMDC QSSDC SLSDC VSJDC SIGDC UBDDC Denver Pole decorative conical steel column Vista decorative conical steel column Petxina decorative conical steel column QSM decorative conical steel column QSS decorative conical steel column Seattle Street decorative conical steel column Vista Junior decorative conical steel column Signature II decorative conical steel column Urbandeco decorative conical steel column Code Luminaire mounting height.5 5 metres.6 6 metres.8 8 metres Code Wind Zones as EN40 For extra heavy area wind zones (EN40 Rationalised Wind Zones) Code Brackets.1A Single head.2a Twin head Code Brackets.VAQ Isobel design 0 tilt.vcv Dominic design 5 tilt.vbb Rohan design 10 tilt.vll Noah design 5 tilt Code Options.FB1 Flange Base 5-8m noah isobel rohan dominic Orderings codes for the Holophane standard column range (conical steel, conical aluminium, tubular base and conical steel mid hinged) can be found in the appropriate Holophane product brochure, or alternatively visit

11 technical details for decorative and standard ranges 11

12 12 technical decorative conical steel columns and brackets ordering ø J I Ko Flange Plate B 400 A 300 F FB1 H ground level G C 150 x 75 cable entry E D The column dimensions for all decorative brackets are as above.

13 13 technical I Ko I Ko Rohan Twin (VBB) Rohan (VBB) J Ko I I I Isobel (VAQ) Noah (VLL) Dominic (VCV) Height (m) Nominal Height Total Height Base Diameter Root Diameter Planting Depth Column Length Door to Ground Door Outreach Length Mounting Diameter drawing ref A B C D E F G H I J Ko 5m (VAQ) x m (VBB) x b 10 5m (VLL) x m (VCV) x m (VAQ) x m (VBB) x m (VLL) x m (VCV) x m (VAQ) x m (VBB) x m (VLL) x m (VCV) x Uplift Angle 5-8m Poles Flange Plate FB1 Bolts M18 x 400 Flange Plate and J-Bolt information will be confirmed at time of order due to the necessity in ensuring the correct plate and J-Bolts are supplied.

14 14 technical standard columns conical aluminium Holophane products that are suitable B aeris large aeris medium denver pole petxina QSM QSS seattle flood Flange Plate 400 signature II urbandeco vista 300 A E vista junior FB H FB1 G F ground level x 75 cable entry D C Height (m) Nominal Height Top Diameter Root End Diameter Planting Depth Overall Length Door to Ground Door Opening Length drawing ref A B C D E F G H Door Opening Width Weight kg* Bending Moment Nm 3m std m std m std m std m std m hd m std * Exclusion TBC 3-6m Poles Flange Plate FB1 Bolts M18 x m Poles Flange Plate FB2 Bolts M18 x 330 Flange Plate and J-Bolt information will be confirmed at time of order due to the necessity in ensuring the correct plate and J-Bolts are supplied. std = Standard hd = Heavy Duty Column type to be confirmed at time of order as this is based on luminaire weight, windage and geographical location.

15 15 standard columns conical steel technical Holophane products that are suitable Flange Plate 400 B aeris large aeris medium caribe chalfont denver pole grosvenor gladiator petxina prismasphere QSM QSS seattle flood signature II urbandeco vista vista grande vista junior FB3 412 FB I A F H FB1 ground level C 150 x 50 cable entry G 500 E D Height (m) Nominal Height Top Diameter Base Diameter Root End Diameter Planting Depth Overall Length Door to Ground Door Opening Length Door Opening Width Weight kg* Bending Moment Nm drawing ref A B C D E F G H I 3m std m std m hd m std m hd m std m hd m std m hd m std m hd * Exclusion TBC 3-5m Poles Flange Plate FB1 Bolts M18 x m Poles Flange Plate FB2 Bolts M24 x m Poles Flange Plate FB4 Bolts M24 x 650 Flange Plate and J-Bolt information will be confirmed at time of order due to the necessity in ensuring the correct plate and J-Bolts are supplied. std = Standard hd = Heavy Duty Column type to be confirmed at time of order as this is based on luminaire weight, windage and geographical location.

16 16 technical standard columns stepped steel Holophane products that are suitable J I aeris large aeris medium ashbourne caribe chalfont denver pole dorchester Flange Plate 430 grosvenor K gladiator hallbrook module A E parkpack petxina FB2, FB3 prismasphere 260 predator small predator large QSM 200 QSS seattle flood signature II FB1 H G C sherington urbandeco ground level F vista vista grande 150 x 75 cable entry 500 D vista junior woburn B Height (m) Nominal Height Base Diameter* Base Height Planting Depth Overall Length Door to Ground Door Opening Length Door Opening Width Spigot Length* Spigot Diameter* Shaft Diameter* Weight kg* Bending Moment Nm drawing ref A B C D E F G H I J K 3m std TBC 4m std m hd m std m hd m std m hd m std m hd m std m hd m std * Exclusion TBC 3-6m Poles Flange Plate FB1 Bolts M18 x 330 6m Poles Flange Plate FB2 Bolts M24 x 400 8m Poles Flange Plate FB3 Bolts M24 x m Poles Flange Plate FB4 Bolts M24 x 650 Flange Plate and J-Bolt information will be confirmed at time of order due to the necessity in ensuring the correct plate and J-Bolts are supplied. std = Standard hd = Heavy Duty Column type to be confirmed at time of order as this is based on luminaire weight, windage and geographical location.

17 17 standard columns mid-hinged steel technical Holophane products that are suitable aeris large aeris medium caribe chalfont denver pole dorchester gladiator grosvenor module 600 parkpack petxina predator small predator large prismasphere QSM QSS seattle flood signature II urbandeco vista vista grande vista junior Flange Plate FB2 Height (m) Nominal Height Top Diameter Base Diameter Root End Diameter Planting Depth Overall Length Door to Ground Door Opening Length Door Opening Width Weight kg* Bending Moment Nm drawing ref A B C D E F G H I 4m std m hd m std m hd m std m hd m std m hd m std TBC 10m hd TBC TBC TBC * Exclusion TBC 4-5m Poles Flange Plate FB1 Bolts M18 x m Poles Flange Plate FB2 Bolts M24 x 400 Flange Plate and J-Bolt information will be confirmed at time of order due to the necessity in ensuring the correct plate and J-Bolts are supplied. std = Standard hd = Heavy Duty Column type to be confirmed at time of order as this is based on luminaire weight, windage and geographical location.

18 18 technical J-anchor bolts For foundation detail guidance refer to Holophane. For columns supplied with optional flange base Holophane offer three types of foundation bolts. Note: The material used for the bolts is equivalent to GR40 type steel, with yield strength 236 N/M2. HEL.FS1 HEL.FS2 HEL.FS3 HEL.FS4 M18 Bolts (FS1) x 330 mm long M24 Bolts (FS2) x 400 mm long M24 Bolts (FS3) x 650 mm long M27 Bolts (FS4) x 630 mm long 330 ± ± ± ± 2.FS1.FS2.FS3.FS4

19 19 technical data EN40 guidelines

20 MERTHYR TYDFIL THE VALE OF GLAMORGAN BLAENAU GWENT CARDIFF SEFTON NEWPORT BLACKBURN WITH DARWEN KNOWSLEY HALTON NORTH SOMERSET WARRINGTON STOCKPORT CITY OF BRISTOL BATH AND NE SOMERSET CITY OF STOKE-ON- TRENT WOKINGHAM BRACKNELL FOREST MILTON KEYNES SLOUGH WINDSOR AND MAIDENHEAD CITY OF KINGSTON UPON HULL NORTH EAST LINCOLNSHIRE 20 EN40 EN40 Guidelines Products affected by EN40 Refer to Holophane Lighting columns for lanterns up to 20 metres. Post top mounted. Columns for side entry luminaires up to 18 metres. NA H-EILEANAN AN IAR HIGHLAND MORAY A B E R D E E N S H I R E ABERDEEN CITY SHETLAND ISLANDS Dashed lines are for clarification purposes only. ORKNEY ISLANDS ANGUS PERTH AND KINROSS DUNDEE CITY Parameters of EN40 Wind Speeds ARGYLL AND BUTE STIRLING CLACKMANNANSHIRE WEST DUNBARTONSHIRE EAST DUNBARTONSHIRE FIFE Sites Structural Strength NORTH LANARKSHIRE FALKIRK WEST LOTHIAN EAST 5 LOTHIAN MIDLOTHIAN The Sites Terrain Category I Sea sides. At the edge of a lake with a length exposed to the wind of at least 5km. Flat, even land without obstacles. Terrain Category II Fenced off cultivated land, some small agricultural buildings, houses or trees. Terrain Category III Industrial or sub-urban zones and forests. Terrain Category IV - Urban perimeters with at least 15% of the surface built on and/or on which the average of buildings exceed 15m. For simplicity, Holophane have grouped lighting columns for administrative areas designated in PD 6547 table A.1, for Light Wind Zones and Medium Wind Zones under one reference, LMZ. For Heavy Wind Zones the reference is HVZ and for Extra Heavy Wind Zones the reference is HEZ. FERMANAGH TYRONE DERRY / LONDONDERRY ARMAGH 1 INVERCLYDE 2 RENFREWSHIRE 3 EAST RENFREWSHIRE 4 GLASGOW CITY 5 EDINBURGH CITY 6 LIVERPOOL 7 BOLTON 8 SALFORD 9 TRAFFORD 10 ROCHDALE 11 MANCHESTER 12 TAMESIDE 13 OLDHAM 14 CITY OF WOLVERHAMPTON 15 WALSALL 16 SANDWELL 17 DUDLEY 18 BIRMINGHAM 19 SOLIHULL 20 COVENTRY ANTRIM DOWN NORTH AYRSHIRE PPEMBROKESHIRE SOUTH AYRSHIRE ISLE OF ANGLESEY EAST AYRSHIRE GWYNEDD CERE D IGION SWANSEA SOUTH LANARKSHIRE D U M F R I E S A N D G A L L OWAY CARMARTHENSHIRE CONWY NEATH PORT TALBOT DEVON BRID GEND POWYS RHONDDA, CYNON, TAFF BLACKPOOL DENBIGHSHIRE FLINTSHIRE CAERPHILLY WIRRAL TORFAEN SCOTTISH BORDERS CUMBRIA 6 WREXHAM MONMOUTHSHIRE LANCASHIRE BRADFORD LEEDS CALDERDALE WAKEFIELD 10 KIRKLEES 7 13 DONCASTER BARNSLEY ROTHERHAM ST HELENS TELFORD AND WREKIN WIGAN COUNTY OF HEREFORDSHIRE SOMERSET BURY CHESHIRE SHROPSHIRE NORTHUMBERLAND SOUTH GLOUCESTERSHIRE DORSET NEWCASTLE UPON TYNE GATESHEAD STOCKTON-ON-TEES STAFFORDSHIRE WORCESTERSHIRE DURHAM GLOUCESTERSHIRE POOLE DARLINGTON SHEFFIELD DERBYSHIRE CITY OF DERBY WILTSHIRE SWINDON CITY OF SOUTHAMPTON BOURNEMOUTH NORTH TYNESIDE SOUTH TYNESIDE SUNDERLAND WARWICKSHIRE HARTLEPOOL MIDDLESBROUGH NORTH YORKSHIRE ISLE OF WIGHT YORK CITY OF NOTTINGHAM CITY OF LEICESTER OXFORDSHIRE WEST BERKSHIRE NOTTINGHAMSHIRE LEICESTERSHIRE READING HAMPSHIRE REDCAR AND CLEVELAND EAST RIDING OF YORKSHIRE CITY OF PORTSMOUTH NORTH LINCOLNSHIRE RUTLAND NORTHAMPTONSHIRE BUCKINGHAMSHIRE LINCOLNSHIRE CITY OF PETERBOROUGH BEDFORDSHIRE LUTON SURREY WEST SUSSEX CAMBRIDGESHIRE HERTFORDSHIRE London CITY OF BRIGHTON & HOVE ESSEX THURROCK EAST SUSSEX NORFOLK MEDWAY KENT SUFFOLK SOUTHEND-ON-SEA CORNWALL CITY OF PLYMOUTH TORBAY km Boundaries revised to April 2001 Crown copyright 2001 ISLES OF SCILLY

21 21 EN40 EN40 Rationalised Wind Zones (PD6547) 2004 Light & medium areas Holophane code: Heavy areas Holophane code: Extra heavy areas Holophane code: Aberdeen Aberdeenshire Angus Antrim Argyll & Bute Armagh Bath & North East Somerset Bedfordshire Blackburn & Darwen Blackpool Blaenau Gwent Bournemouth Bracknell Forest Bridgend Brighton & Hove Bristol Buckinghamshire Caerphilly Carmarthenshire Cambridgeshire Cardiff Ceredigion Channel Islands Cheshire Clackmannanshire Conwy Cornwall Cumbria Darlington Denbighshire Derby Derbyshire Devon Dorset Down Dumfries & Galloway Dundee Durham East Ayrshire East Dunbartonshire East Lothian East Renfrewshire East Riding of Yorkshire East Sussex Edinburgh Essex Falkirk Fermanagh Fife Flintshire Glasgow Gloucestershire Greater London Greater Manchester Gwynedd Halton Hampshire Hartlepool Herefordshire Hertfordshire Highland Inverclyde Isle of Anglesey Isle of Man Isle of Wight Isles of Scilly Kent Kingston upon Hull Lancashire Leeds City Leicester Leicestershire Lincolnshire Londonderry Luton Medway Merseyside Merthyr Tydfil Mid Lothian Middlesbrough Milton Keynes Monmouthshire & Newport Moray Neath Port Talbot Norfolk North Ayrshire North East Lincs North Lanarkshire North Lincs North West Somerset North Yorkshire Northamptonshire Northumberland Nottingham Nottinghamshire Orkney Oxfordshire Pembrokeshire Perth & Kinross Peterborough Plymouth Poole Portsmouth Powys Reading Redcar & Cleveland Renfrewshire Rhondda Cynon Taff Rutland Scottish Borders Shropshire Slough Somerset South Ayrshire South Gloucester South Lanarkshire South Yorkshire Southampton Southend Staffordshire Stirling Stockton on Tees Stoke-on-Trent Suffolk Surrey Swansea Swindon Telford and Wrekin Thurrock Torbay Torfaen Tyne and Wear Tyrone Vale of Glamorgan Warrington Warwickshire & Coventry West Berkshire and Newbury West Dunbartonshire West Lothian West Midlands West Sussex West Yorkshire Western Isles Wiltshire Windsor & Maidenhead Wokingham Worcestershire Wrexham York

22 22 Disclaimer Holophane columns of 8m and above are suitable for Terrain Category II to IV, as specified in EN 40, whereas columns below 8m are suitable for location of Terrain Category III and IV only. While it is the purchasers responsibility to specify the Terrain Category for the location of the columns, it is considered that the Terrain Categories specified above, which are recommended in PD 6547 (guidance on the use of EN 40), will be suitable for the vast majority of lighting columns installed within the UK. It is of course possible that a small number of columns will be installed in more severe Terrain Categories than those above. Such locations include coastal sites (within 5Km of the coast), columns mounted on elevated locations such as bridges or installed on sites above 250m altitude. Locations with known local wind funnelling also need to be considered as a special case. Where special conditions exist or there are concerns that columns designed for the standard Terrain Categories detailed above may not be suitable, please contact your local Holophane Sales Engineering who will pass your specific site details to our Unique Solutions Department. The information required to ensure a suitable column is specified for your particular set of circumstances is. The addition of locally applied signs and banners can significantly increase the load on the column. In such cases, a higher specification column is likely to be required. Please give your local Holophane Engineer details of the additional loading you wish to apply, i.e. maximum area and mounting height. In the case of light strings (Christmas lights) the weight/m, distance of the span and the minimum centre sag dimension you will be installing. Under no circumstances should lighting columns be drilled or additional items welded to columns as this will locally reduce the strength of the column and may cause a significant safety hazard. Mounting height. Column type e.g. Conical Number and type of luminaire. Bracket type if appropriate Administrative area of installation. Altitude if above 250m. Details of site including any relevant or special conditions. Mounting method - direct embedment or flange base.

23

24 Holophane Europe Limited Bond Avenue, Bletchley, Milton Keynes MK1 1JG United Kingdom Telephone: +44 ( 0 ) UK Fax: +44 ( 0 ) International Fax: +44 ( 0 ) info@holophane.co.uk decorative columns and brackets range Publication No. CB 0314 UK