Holedall Coupling Machines

Transcription

1 ry isconnect wivel oints oss hank/ lastic oupling achines ams securely attach couplings to hose. ive machines meet every hose service requirement. ams, are powerful finely engineered machines designed specifically to swage and internally expand couplings by hydraulic pressure. ince each ram generates all the hydraulic pressure required to attach the coupling, one person can easily operate the equipment. 5 on am pecially designed ram for internally expanded couplings only. ench mounted model (optional stand available), producing up to 0,000, for up to 5 tons of ram force. apable of expanding through steel fittings and ¾" through brass etroleum fittings. he motor is ½ h.p., 5 volt 60 cycle, single phase with foot pedal. 25 on am 00 on am sed for swaging fittings to hose from through 0" With optional accessories, this ram may be used for internally expanded couplings on hose from through. his machine is capable of producing up to 00 tons of ram force. A -/8 h.p., 5 volt, 60 cycle, single phase motor is standard with remote, (220/440 volt motors are available). ree standing model producing up to 0,000 of line pressure for up to 25 tons of ram force. apable of external swaging ¼" through hose and internal expanding through hose, with proper equipment. he motor is ½ h.p., 5 volt 60 cycle, single phase with foot pedal. igh speed pump kit option is available. 50 on am 350 on am ank ruck aint. & echnical ench mounted model (optional stand available), producing up to 0,000, for up to 50 tons of ram force. apable of external swaging through hose and internal expanding through hose, with proper equipment. A -/8 h.p., 5 volt, 60 cycle, single phase motor is standard with remote, (220/440 volt motors are available). sed for swaging and otary fittings. his ram is capable of producing up to 354 tons of ram force for swaging. A 50 lb. flange will fit through the bed plate. his ram has 3 of stroke. A 2.5 h.p., 230 volt, 60z, 3 phase motor is standard with remote. All ams require dies of the proper size to reduce the ferrule to the proper diameter for a good grip on the hose. ushers of the proper size must be used on the end of the am to push the fitting through the die. ie and pusher selection depends on the sizes and types of hoses being coupled. errule recommendations and a ie hart binder are available upon request. onsult your ixon representative for specific details

2 4 ecommended Working ressures couplings, regardless of coupling style, are never to be used for steam service at any pressure. fittings listed below are not to be used with cable reinforced high-pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in recommendations. n addition, nternally xpanded couplings are not to be used with plastic lined chemical hose. onsult ixon for recommendations on usage. couplings (xternally waged), to perform satisfactorily, must be applied properly in accordance with ixon's assembly procedures, using correct die and ferrule for that particular hose end. ixon's ie and errule ecommendation uide is to be used to select correct dies and ferrules. f you do not have the updated ie and errule ecommendation uide, consult the ixon factory. trict adherence to ferrule range (nternally xpanded) for each hose end to be assembled is essential for satisfactory performance. ote: service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting (reference chart below)*. edia being transported through the hose should be compatible with the stem material. ompatibility of ferrule material with the environment in which it will be used is recommended. onsult ompatibility hart on pages or the ixon factory for material compatibility. or applications other than the ones listed, please consult the ixon factory. xternally waged nternally xpanded ize -/ -3/8" -/ 2-/ 5" 8" 0" tandard,, ong tyle,,,000,000,000,000, ight uty otched otched hort,,,,, A * he assembly's (hose + coupling) maximum working pressure is the lesser of: ) he hose rated working pressure, or 2) he coupling rated working pressure ** or hoses which use X48-3 to X48-5 and X64-2 to X64-5, consult the ixon factory for working pressures. ee notes below for specific recommendations. *** maximum recommended working pressures, in, at 70 ambient temperature am and W X, XV, X tandard ecommended for use on most one and two wire braid reinforced hoses, fiber reinforced (braided or spiraled) with or without helical wire such as: oil suction and discharge hose, barge and dock loading and unloading hose as well as.. gas hose, anhydrous ammonia hose, acid chemical hose and high pressure air and water hose. ong tyle ecommended for use on hose as listed under standard fittings where additional retention is required due to higher working pressures or end pull. onsult maximum working pressure chart or call the ixon factory. ecommended for oyalflex 93 and 96 hose or hoses with similar construction, having helical wire for a given range. ight uty ecommended for use in the same applications as standard fittings above where lower working pressures are encountered. onsult maximum working pressure chart or consult the ixon factory. nternally xpanded ecommended for concrete placement, grout and plaster, food, dairy, pharmaceutical as well as other applications where increased flow capacity is important. onsult maximum working pressure chart or call the ixon factory for additional application and working pressure information low hief / nternally rimp xpanded X, X, X, A ry isconnect wivel oints oss hank/ lastic ank ruck aint. & echnical

3 ry isconnect wivel oints oss hank/ lastic xternal wage oupling ystem he coupling system provides outstanding strength, durability and safety. he system is a method of attaching couplings to hose utilizing a progressive swage. he patented couplings include a stem and a specially engineered ferrule. he hydraulic swaging of the coupling to the hose is accomplished by pushing the ferrule through a die which reduces the ferrule, thus providing a 360 uninterrupted compression band around the hose. A hydraulic ram is the only piece of machinery necessary to accomplish the coupling. Available in five different sizes - 5, 25, 50, 00 and 350 ton - these rams will accommodate dies and pushers of various sizes so that hoses up to 0" in diameter may be coupled. his multi-purpose, high pressure coupling system requires no bolts and results in a clean coupling with no protrusions. he swaging operation is fast and hose of various lengths and different styles can be coupled. ase of operation, flexibility and economy make the method an unequalled assembly system. he coupling - the most adaptable coupling available. couplings provide long-lasting efficiency and safety. are available in stainless steel and carbon steel. are furnished with pipe thread, plain end, victaulic grooved or flanged ends. ixon stems and ferrules are specifically designed to be used together as a coupling system. ue to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with ixon products. treamlined, lightweight coupling consisting of ferrule and stem. o protrusions to snag on equipment. stem ferrule isplacement of hose carcass into flared portion of coupling traps and seals hose end. hose ank ruck aint. & echnical ross-section of holedall externally swaged assembly

4 xternal wage tems designed and machined for hydraulic suction line applications using A004 hydraulic hose arbs provide easy assembly and maximum gripping action. for higher working pressure applications use long style stems and ferrules 5" 8" 0" 5" 8" 0" tubular type arbon teel 36 tainless ong tyle arbon teel art # rice/ art # rice/ art # rice/ tubular type arbon teel 36 tainless ong tyle arbon teel art # rice/ art # rice/ art # rice/ $ $ $ $ ale ipe hreaded () nd eveled nd for $ $ " 8" 0" tubular type arbon teel 36 tainless ong tyle arbon teel art # rice/ art # rice/ art # rice/ investment cast design 36 tainless teel art # d nd (Victaulic) $ $ rice/ $ A ry isconnect wivel oints oss hank/ lastic 4 tubular type arbon teel from to art # rice/ -30/6-34/6 6W-80 $ /6-38/6 6W /6-42/6 6W /6-48/6 20W /6-56/6 20W /6 20W /6 2-40/6 32W /6 2-48/6 32W /6 2-56/6 32W pecial pusher required for and sizes: emale nd stem and ferrule - two piece design sizes stem and ferrule - one piece design - sizes 393 ank ruck aint. & echnical

5 ry isconnect wivel oints oss hank/ lastic ank ruck aint. & echnical xternal wage errules he selection of ferrules is very important to achieve the proper coupling-to-hose assembly. ferrules are plated carbon steel style ferrules are used with all standard length male stems style ferrules are extra long and are used with all long style stems 5" lated arbon ong tyle teel lated arbon tl. from to art # rice/ art # rice/ -44/6-48/6 20- $ $ /6-56/ / /6 2-8/ / /6 2-8/ /6 2-6/ /6 2-24/ /6 2-32/ /6 2-40/ /6 2-48/ /6 2-56/ /6 3-2/ /6 3-8/ /6 3-6/ /6 3-24/ /6 3-32/ /6 3-40/ /6 3-40/ /6 3-48/ /6 3-56/ / /6 4-8/ /6 4-39/6 64-Z Z /6 4-44/ /6 4-52/ /6 4-60/ /6 5-4/ /6 5-2/ /6 5-20/ / / /6 5-36/ /6 5-60/ /6 6-4/ /6 6-2/ /6 6-20/ /6 6-28/ /6 6-38/ /6 6-44/ requires special stem: $ requires special stem: $ " 0" lated arbon ong tyle teel lated arbon tl. from to art # rice/ art # rice/ 6-44/6 6-63/6 7" 7-4/6 7-5/6 7-2/6 7-3/6 7-20/6 7-2/6 7-28/6 7-29/6 7-36/6 7-37/6 7-44/6 7-45/6 7-52/6 7-53/6 7-60/6 7-6/6 8" 9" 9-9/6 9-20/6 9-24/6 9-25/6 9-32/6 9-33/6 9-40/6 9-4/6 9-48/6 9-49/6 9-56/6 9-57/6 0" 0-/6 0-4/6-32/6-44/6-45/6-60/6-6/6 2-2/6 2-3/6 2-28/6 2-29/6 2-44/6 2-45/6 2-60/6 96-Z Y $ Z Y or applications with hose ranges not listed, call the factory. $

6 xternal wage errules or use with oyal-lex thin wall hose. hese specially designed carbon steel ferrules have serrations on the outside and should be used with stem styles, and stems on page 393. arbon teel from to art # rice/ -58/6 2-2/6 W24 $ /6 2-34/6 W /6 3-38/6 W /6 4-42/6 W takes special stem; 64-42, $99.70 tainless xternal wage errules ight duty 304 stainless ferrules for use with standard length stems such as the series. onsult ixon for die recommendations. ee page 0-3 for specific pressure recommendations. 304 tainless teel from to art # rice/ -60/6 2-2/6 A2334 $ /6 2-22/6 A /6 A /6 2-54/6 A /6 3-46/6 A /6 3-54/6 A /6 4-47/6 A A ry isconnect wivel oints oss hank/ lastic 4 xternal wage otched tems and errules he largest advantage of the notched design is that the coupling can be removed from a damaged hose by cutting away the ferrule, without necessarily damaging the fitting. After inspection of the fitting to determine its suitability for reuse, it can be reinstalled into another hose by using a new ferrule. he notched system allows you to better manage your inventories. You can stock one stem and two ferrules, and cover the same hose range with less inventory. You must purchase a fitting and the matching ferrule to create an assembly. or hose outside diameters of 2-4/6 and below, the couplings are crimp only. or hose outside diameters of 2-5/6 and above, the couplings can be crimped or swaged. ee page 4 for cam and groove style notched fittings. ize ize nly use the shank with the ferrules. ue to differences in dimensions and tolerances for safety reasons, do not use other manufacturer's stems or ferrules with ixon products. at 70 * * ontact factory for pressure information ferrules arbon teel 304 tainless teel rom: o: art # rice/ art # rice/ -60/6 2-4/6 2-30/6 2-42/6 3-30/6 3-47/6 4-40/6 2-2/6 2-22/6 2-44/6 2-54/6 3-46/6 3-54/6 4-47/6 stems lated arbon teel 36 tainless teel art # rice/ art # rice/ A2334 A2370 A2709 A2885 A3760 A3885 A500 $ $ A2334 A2370 A2709 A2885 A3760 A3885 A $ $ ank ruck aint. & echnical

7 ry isconnect wivel oints oss hank/ lastic ank ruck aint. & echnical 50# AA flange drilling available with carbon steel stem, ferrule and flange, or 36 stainless steel stem, flange and carbon steel ferrule available in other sizes, consult the factory for pricing 8" xternal wage langed Assemblies fixed flange floating flange arbon teel tainless teel arbon teel tainless teel from to art # rice/ art # rice/ art # rice/ art # rice/ 2-28/6 2-40/6 325 $ $ $ $ /6 2-48/ /6 2-56/ /6 3-40/ /6 3-48/ /6 3-56/ /6 4-44/ /6 4-52/ /6 4-60/ " 7-4/ /6 7-2/ /6 7-20/ /6 9-24/ /6 9-32/ /6 9-40/ xternal wage ni-ange ale plated carbon steel stem and ferrule lated arbon teel from to art # rice/ / 3/8" / 34/6 38/6 42/6 46/6 50/6 54/6 54/6 58/6 62/6-0/6-4/6-8/6-30/6-34/6-38/6-42/6 38/6 42/6 46/6 50/6 54/6 58/6 58/6 62/6-2/6-4/6-8/6-22/6-34/6-38/6-42/6-46/ $ esigned for smaller hose systems, these couplings may be used for hose 's of ¼" - and come complete with factory assembled stem and ferrule combination. can be swaged or crimped other hose 's available, consult the factory stainless steel stems are investment cast 36 stainless steel stem, plated carbon steel ferrule tainless/arbon teel from to art # rice/ -0/6-4/6 2 $ /6-8/ /6-22/ /6-34/ /6-38/ /6-42/ /6-46/ stainless steel stem, 304 stainless steel ferrule tainless teel from to art # rice/ / 58/6-6/6-3/6-30/6-38/6 62/6-2/6-22/6-38/6-46/ $

8 xternal wage igh ressure hese couplings are for services requiring a fitting which will withstand extremely high pressures (up to 3,000 at 70 ) and severe operating conditions, such as on small and medium size drilling rigs, used for slim hole, core drill, workover, seismograph, water well, blast or shot holes, etc. hese long, rugged fittings are machined from seamless pipe and tubing with specially designed serrations. he mating ferrules are machined from heavy wall material incorporating matching serrations. hese couplings are shipped with matching ferrules. lease provide hose when ordering for properly sized ferrule. ake sure both ends of the hose are measured for. ust be swaged with 50 on or 00 on am. An accurate hose must be provided to complete the part # and to ensure proper retention. he fittings are sold as a complete coupling, including stem and ferrule. A and sizes are interchangeable ale hread oupling nits ize A ize tem and errule omplete Assemblies nternal xpansion he ixon nternally xpanded are essential when maximum flow is important. nly one expansion tool is needed for each hose. ome recommended applications of these fittings are: concrete pump hose, plaster and grout hose, oil suction and discharge hose, multi-purpose heavy duty air hose, jetting hose, barge loading hose and bottom loading hose. enefits of nternal xpansion : maximum flow of media reduction of turbulence through hose excellent sealing and retention characteristics outperforms band clamps easy and consistent installation Zinc lated teel art # rice/ 32-* 40-* 48-* ale A hread oupling nits Zinc lated teel art # rice/ * * * $ nd onfigurations Available: male raised alifornia victaulic others available on request ixon stems and ferrules are specifically designed to be used together as a coupling system. ue to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with ixon products. A ry isconnect wivel oints oss hank/ lastic excellent hose retention errule tem ank ruck hose 4 ross-section of internally expanded assembly aint. & echnical

9 ry isconnect wivel oints oss hank/ lastic ank ruck aint. & echnical male pipe threaded end ize arbon teel art # rice/ X6 X20 X24 X32 X40 X48 X64 X96 $ nternal xpansion tems heavy duty raised end ize arbon teel art # rice/ X24 X32 X40 X48 X64 $ ize grooved end arbon teel art # XV20 XV24 XV32 XV40 XV48 XV64 utt Weld x eavy uty aised nd (alifornia tyle) eveled design for welding to chedule 40 pipe allows connection to a heavy duty raised end (alifornia style) hose fitting or similar style end. ength for X aised nd (alifornia tyle) tems rice/ $ rop-forged steel clamps for fast assembly when connecting heavy-duty raised end fittings used for concrete. hese clamps can be used to connect the ends of pipes or hoses which use the aised nd or alifornia style fittings listed above. hipped with double lipped gasket and safety pin. through are galvanized; and 5" are painted green. lamp should only be used with safety pin in place. 5" ize 5" alifornia style end arbon teel ength art # rice/ $ orged teel una- askets art # rice/ art # rice/ X50 $34.00 X50 $5.00 X X X X 5.00 X X X X X X

10 4 errule lated arbon teel from to ize art # rice/ -24/6-28/6-7/ X6- $ /6-32/6 -/ X /6-36/6-9/ X /6-44/6 -/ X20-Z /6-48/6 - X /6-52/6-3/ X /6-56/6-7/8" X /6-60/6-5/ X /6 X /6 2-/ X /6-60/6-5/ X24-Z /6 X /6 2-/ X /6 2-8/6 2-/8" X /6 2-2/6 2-3/ X /6 2-6/6 2-/ X /6 2-20/6 2-5/6 X /6 2-24/6 2-3/8" X /6 2-36/6 2-9/ X32-Y /6 2-40/6 2- X32-Z /6 2-44/6 2-/ X /6 2-48/6 2- X /6 2-52/6 2-3/ X /6 2-56/6 2-7/8" X /6 2-60/6 2-5/ X /6 X /6 3-/ X /6 3-/ X /6 3-8/6 3-/8" X /6 3-2/6 3-3/ X /6 3-6/6 3-/ X /6 3-20/6 3-5/ X /6 3-24/6 3-3/8" X /6 3-28/6 3-7/ X /6 3-32/6 3-/ X nternal xpansion errules or hoses using ferrule sizes X48-3 thru X48-5 and X64-2 thru X64-5, consult the factory for working pressures errule lated arbon teel from to ize art # rice/ 3-32/6 3-36/6 3-9/ X48- $ /6 3-40/6 3- X /6 3-44/6 3-/ X48-V /6 3-48/6 3- X48-W /6 3-52/6 3-3/ X48-X /6 3-56/6 3-7/8" X48-Y /6 3-60/6 3-5/ X48-Z /6 X /6 4-/ X /6 4-8/6 4-/8" X /6 4-2/6 4-3/ X /6 4-6/6 4-/ X /6 4-40/6 4- X /6 4-44/6 4-/ X /6 4-48/6 4- X64-V /6 4-52/6 4-3/ X64-W /6 4-56/6 4-7/8" X64-X /6 4-60/6 4-5/ X64-Y /6 5" 5" X64-Z " 5-4/6 5-/ X /6 5-8/6 5-/8" X /6 5-2/6 5-3/ X /6 5-6/6 5-/ X /6 5-20/6 5-5/ X /6 6-44/6 6-/ X /6 6-48/6 6- X /6 6-50/6 6-25/3 X /6 6-52/6 6-3/ X /6 6-56/6 6-7/8" X /6 6-60/6 6-5/ X /6 7" 7" X96-7 7" 7-4/6 7-/ X /6 7-8/6 7-/8" X /6 7-2/6 7-3/ X /6 7-6/6 7-/ X96-7-6/6 7-20/6 7-5/ X /6 7-22/6 7-/3 X /6 7-24/6 7-3/8" X A ry isconnect wivel oints oss hank/ lastic ank ruck aint. & echnical

11 ry isconnect wivel oints oss hank/ lastic ank ruck aint. & echnical ¾" nternally xpanded ermanent - covill tyle internally expanded permanent coupling are recommended for discharge and suction service. ommonly used in the transfer of fuel to homes, airplanes, ships, etc. he working pressure of the 520- fitting varies with the size of the fitting, the size and construction of the hose and the media being conveyed. onsult the factory for recommendations. ixon stems and ferrules are specifically designed to be used together as a coupling system. oth the male and female have octagonal facets for tightening with a wrench. he female in and larger sizes has lugs for tightening. he stem is expanded to nominal of hose for a rigid, uniform, full-flow area. ale and female stems are machined from bar stock or solid brass forgings; ferrules are available in brass and stainless steel. are compact, light and streamlined to eliminate catching on curbs and shrubs. -/ -3/8" -/ 2-/ -3/8" stem has thread 2 requires special adapter, part # 523A 3 and parts have female thread from to art # rice/ -8/6 -/6 75AA $8.5-2/6-4/6 75A 8.5-5/6-7/ /6-20/ /6-26/6 AAA-A /6-29/6 AA-A /6-32/6 A-A /6-35/6 -A /6-38/6 -A /6-4/6 -A /6-44/6 -A /6-42/6 25AA-A /6-46/6 25A-A /6-50/6 25-A /6-54/6 25-A /6-58/6 25-A /6-62/ o not interchange with other manufacturer's fittings errules he 520 fittings are designed for internal expansion only. are pre-lubricated for assembly. and and electrically operated installation equipment is available. onsult factory for pricing and availability. male male female female victaulic groove art # rice/ art # rice/ art # rice/ art # rice/ art # rice/ 592 $ $ A $ A $ $ A A A A ote: he fittings on this page are intended for fuel delivery service. ee facing page for information on A 529 certification. A wide range of 520- ferrules permits a perfect assembly of a coupling to a corresponding size of hose within commercial tolerances regardless of wall thickness. liminates need for large stock of coupling bodies. onsult ixon for other hose 's. from to art # rice/ -47/6-50/ /8" -5/6-54/ /6-58/ /6-62/ /6-57/6 5AAA-A -58/6-62/6 5AA-A $ /6 2-3/6 2-2/6 2-6/6 5A-A 5-A /6 2-/6 5-A /6 2-4/6 5-A 2-5/6 2-9/6 5-A 2-20/6 2-24/ /6 2-28/ , and ferrules will be replaced by A ferrules on facing page as inventory is depleted from to art # rice/ 2-27/6 2-30/6 2AA $ /6 2-34/6 2A /6 2-38/ /6 2-42/ /6 2-46/ /6 2-50/ /6 2-54/ /6 3-/6 25A /6 3-6/ /6 3-/ /6 3-6/ /6 3-2/ /6 3-26/ /6 3-34/6 3AAA /6 3-39/6 3AA /6 3-45/6 3A /6 3-50/ /6 3-54/

12 4 A ertified ermanently Attached etroleum he following fittings have been tested and are compliant with A 529 6th edition. oupling procedures, ferrule recommendations and A test data are available upon request, please contact the factory. ize hread ype 520- series male thread Aluminum art # rice/ art # rice/ 522-A 5222-A 5232-A 5242-A 5252-A 5262-A 5282-A requires a special thrust plate $ A5242-A A5252-A A5262-A $ from to art # rice/ -24/6-26/6 AAA-A $ /6-29/6 AA-A /6-32/6 A-A /6-35/6 -A /6-38/6 -A /6-4/6 -A /6-44/6 -A /6-42/6 25AA-A /6-46/6 25A-A /6-50/6 25-A /6-54/6 25-A /6-58/6 25-A /6-62/6 25-A /6-57/6 5AAA-A /6-62/6 5AA-A /6 2-2/6 5A-A /6 2-6/6 5-A /6 2-/6 5-A /6 2-4/6 5-A /6 2-9/6 5-A 6.40 ize hread ype A 520- eries errules 520- series female thread art # 52-A- 522-A- 523-A- 524-A- 525-A- 526-A- 528-A- rice/ $ tainless teel Aluminum from to art # rice/ art # rice/ 2-3/6 2-34/6 2A-A $ AA-A $ /6 2-38/6 2-A A-A /6 2-42/6 2-A A-A /6 2-46/6 2-A A-A /6 2-50/6 2-A A-A /6 3-/6 25A-A AA-A /6 3-6/6 25-A A-A /6 3-/6 25-A A-A /6 3-6/6 25-A A-A /6 3-2/6 25-A A-A /6 3-39/6 3AA-A AAA-A /6 3-45/6 3A-A AA-A /6 3-50/6 3-A A-A /6 3-54/6 3-A A-A /6 3-59/6 3-A A-A /6 4-48/6 4-A /6 4-5/6 4-A /6 4-54/6 4-A /6 4-57/6 4-A /6 4-59/6 4-A /6 4-62/6 4-A /6 5" 4-A A ry isconnect wivel oints oss hank/ lastic ank ruck aint. & echnical

13 ry isconnect wivel oints oss hank/ lastic ank ruck aint. & echnical eplacement Washers replacement washers for 520- series female internally expanded permanent couplings on pages 400 and ize ¾" ermanent for ump una art # rice/ $ he most economical and trouble-free couplings for gas pump hose. errations on the stem become imbedded in the hose eliminating wicking and leakage. he shell extends beyond the stem to prevent cutting of interior walls. apered ends of stem and shell protect hose when flexed. provide tamper-proof static connection which cannot be broken without completely damaging coupling and hose. internal expansion of stem to nominal of hose provides full flow road, firm grip of coupling extends hose life by making it possible for hose to withstand more flexings. and and electrically operated installation equipment are available. onsult factory for pricing and availability. aution: eattach static wire if required. ale -/3-9/6 -/6-3/6-7/3-7/6-25/6-29/6 -/ -9/ thrust plate required 005 oupling xpander achine hand operated, pull-through type expander for use in a fixed location for small production runs or as a portable repair type expander attaches sizes ¾" through of the 520- eries couplings, and all sizes of 570- and 580- eries couplings expander tooling sold separately hrome lated art # rice/ 574 $ art # rice/ $

14 4 ubl-rip e-attachable for urb ump wo-piece re-attachable coupling made of chrome-plated brass for pump hose. treamlined design prevents damage to hose and fits smartly on new pump equipment. Wide, flat surfaces of body threads protect inside of hose from breaking. apered surfaces of sleeve and body cradle hose, prevent one-point strain from flexing. is gripped on its full circumference in two places, insuring a rigid leakproof connection. couplings have standard male threads worn portion of hose can be removed and ubl-rip can be reapplied easy assembly: is held in position by sleeve as body is threaded home. nly a wrench is required to assemble the ubl-rip. aution: eattach static wire if required. ale ale octagonal shape -/ -/3 -/8" -3/6 -/ -3/8" -7/ -/ -/3 -/ -/8" -3/6 -/ -3/8" -7/ -/ - eries ubl-rip wivel eattachables hrome lated art # rice/ $ items will be discontinued when stock is depleted 2 octagonal shape ubl-rip eattachables hrome lated art # rice/ $ A ry isconnect wivel oints oss hank/ lastic ank ruck aint. & echnical

15 ry isconnect wivel oints oss hank/ lastic ank ruck aint. & echnical nternal xpansion (X) tyle lean-n-lace () compliant low hief internal expansion (X) fittings are only to be used with low hief stainless steel ferrules. low hief fittings are used in the food, dairy and beverage industries. the ferrule 's are designed in increments of / lamp nd tems ube Weld nd tem pecial xpansion lug for ompliant X 304 stainless steel from to art # rice/ -56/6-59/6 24X.937 $ /6-63/6 24X /6 24X /6 2-7/6 24X /6 2-/6 24X /6 2-5/6 24X /6 2-9/6 24X /6 2-3/6 32X /6 2-35/6 32X /6 2-39/6 32X /6 2-43/6 32X /6 2-47/6 32X /6 2-5/6 32X /6 2-55/6 32X /6 2-59/6 32X /6 40X /6 3-7/6 40X /6 3-/6 40X /6 3-5/6 40X /6 3-9/6 40X /6 3-23/6 40X /6 3-3/6 40X low hief errules see pages for sanitary style gaskets see pages for sanitary style clamps special plug is required to expand compliant fittings special adapter plate is required to expand compliant fittings 3A compliant when assembled by 3A authorized hose shop special plug is required to expand compliant fittings ize 304 tainless teel ize art # rice/ X32-3A $75.00 ize art # 304 tainless teel art # rice/ X24-3A X32-3A X48-3A X37 X87 X stainless steel from to art # rice/ 3-32/6 3-35/6 48X3.562 $ /6 3-39/6 48X /6 3-43/6 48X /6 3-47/6 48X /6 3-5/6 48X /6 3-55/6 48X /6 3-59/6 48X /6 3-63/6 48X /6 48X /6 4-7/6 48X /6 4-39/6 64X /6 4-43/6 64X /6 4-47/6 64X /6 4-5/6 64X /6 4-55/6 64X /6 4-59/6 64X and ferrules do not have serrations on the 2 consult the factory for working pressure $