Installation and Maintenance Instructions

Transcription

1 Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one () year from the date of purchase. During this one-year warranty period, if the product is found to be defective, T&S shall, at its options, repair and/or replace it. To obtain warranty service, products must be returned to... T&S Brass and Bronze Works, Inc. Attn: Warranty Repair Department Saddleback Cove Travelers Rest, SC 9690 Shipping, freight, insurance, and other transportation charges of the product to T&S and the return of repaired or replaced product to the purchaser are the responsibility of the purchaser. Repair and/or replacement shall be made within a reasonable time after receipt by T&S of the returned product. This warranty does not cover Items which have received secondary finishing or have been altered or modified after purchase, or for defects caused by physical abuse to or misuse of the product, or shipment of the products. Any express warranty not provided herein, and any remedy for Breach of Contract which might arise, is hereby excluded and disclaimed. Any implied warranties of merchantability or fitness for a particular purpose are limited to one year in duration. Under no circumstances shall T&S be liable for loss of use or any special consequential costs, expenses or damages. Some states do not allow limitations on how long and implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Specific rights under this warranty and other rights vary from state to state. P/N: Rev. Date: Drawn: TEH Checked: JRM 08-- Approved: JHB 08-- Installation and Maintenance Instructions BASE FAUCET B-00, B-0, B-0 and B-00 Deutsch: Installations- und Wartungsanleitungen Español: la Instalación y las Instrucciones de Mantenimiento Français: les Instructions d Installation et d Entretien

2 Exploded View

3 Base Faucet Assemblies Part Number Guide Asm, Faucet (Swivel) B-00-LN Asm, Faucet (Rigid) B-00-LN Faucet Body (Swivel) Faucet Body (Rigid) Asm, Coupling Flange 00AA Washer Asm, Cartridge Left Hand with Spring Checks Right Hand with Spring Checks Left Hand without Spring Checks Right Hand without Spring Checks Handle, Lever - Hot w/ Index & Screw 007- Handle, Lever - Cold w/ Index & Screw Index, Button Hot (Red) 006- Cold (Blue) Screw, Handle * Optional Supply Connector Kit B-00-K * Order separately Nozzle Assemblies 9 Asm, Nozzle Swing Nozzle, 6 09X Nozzle, 06X Nozzle, 8 06X 0 Asm, Gooseneck Nozzle (Rigid) 0X Asm, Gooseneck Nozzle (Swivel) X Swivel Piece Washer, Swivel Piece Repair Kit 0- Sleeve, Swivel O-Ring Nut, Swivel 7 Grease Tube 007-

4 Nozzle Installation: Note: Nozzles should be installed first. If installing Rigid Gooseneck. Apply teflon tape or pipe joint compound to threaded end of no.9.. Tighten no.9 firmly by hand into no.. 9 General Instructions Enlarged View Faucet Installation: 6. Shut off water supply and drain lines. Drill () two holes, approximately -/ [ cm] diameter in wall with 8 [0 cm]centers, where you are installing no.. 8 [0cm] If installing Swivel Nozzle:. Insert no.9 or no.0 into no. and rotate to front of sink.. Tighten no. firmly with a wrench.,,, 9 or 0 7. Apply teflon tape or pipe joint compound to water supply lines. 8. Connect no. to water supply lines by attaching no. with eccentric centers onto nipple supplied by others and tighten no. against wall. Make sure no. is in place. Nut behind wall to be supplied by others. Trim supply lines if necessary. wall For swivel repair or replacement of (o-ring) no. and (sleeves) no.:. Insert one no. onto no.. Install no. on no. and lubricate liberally with provided no.7. Install second no. onto no.. (See Enlarged View) water supply line (supplied by others) 9. Turn on water supply and check for leaks. nut

5 Instrucciones Generales Instalación de la boquilla: Nota: Las boquillas deben de ser instaladas primero. Instalación de la boquilla rígida de cuello de cisne. Aplique al extremo con rosca de la parte No.9 cinta para rosca de tubería o compuesto de coyuntura.. Aprete firmemente a mano la 9 parte No.9 entre la parte No.. Dibujo Ampliado Instalación de la canilla: 6. Cierre la fuente principal de agua y desagüe las tuberias. Perfore () dos huecos apróximadamente de cm de díametro en la pared, con centros de 0 cm, donde la parte No. será instalada. 8 [0cm] Si esta instalando boquilla oscilar. Insarte la parte No.9 ó No.0 dentro de la parte No. y gire hacia el frente del lavatorio.. Con una llave aprete firmemente la parte No..,,, 9 o 0 7. Aplique cintas para rosca de tubería o compuesto de coyuntura a las lineas del surtido de agua. 8. Conecte la parte No. a las lineas del surtido de agua juntando la parte No. (con los lados excéntricos) en los tubos (surtidos por otros) y aprete la parte No. contra el pared. Asegúrese que la parte No. este situada. (La tuerca en el otro lado de la pared esta surtida por otros). Si es necesario corte las lineas de surtido. Para el reparo del eje giratorio o reemplazo de (argolla de goma) partes No. y (manga) No... Insarte la parte No. en la parte No.. Instale la parte No. en la parte No. y lubrique liberalmente con la parte No.7 surtida. Instale la segunda parte No. en la parte No.. (Vea el dibujo ampliado) mostrador Linea de surtido (surtidos por otros) tuerca 9. Abra la fuente de agua e inspeccione por filtraciones.

6 9 Instructions Générales L Installation De L Ajutage: Noter: Les ajutage devoir être installer au début. Si vous installer l ajutage col-de- cygne. Appliquer le ruban en Téflon ou le composé pour les tuyaux à l extrémité de N.9.. Resserrer N.9 fermement par le main dans N.. vue agrandie 8 [0cm] L Installation Du Robinet: 6. Fermer la réserve de l eau et égoutter la tuyauterie. Percer deux trous, avec un diamètre environs cm dans le mur avec les centres de 0 cm où vous installer N.. Si vous installer l ajutage pivotant. Insérer Nº.9 ou Nº.0 dans Nº. et le tourner jusqu à la face de l évier.. Resserrer Nº. fermement avec une clef. 9 et 0,,, Pour la réparation de l ajutage pivotant ou le remplacement de (l anneau o) Nº. et (les manches) Nº... Insérer un Nº. sur Nº.. Installer Nº. sur Nº. et lubrifier libéralement avec le Nº.7 fourni. Installer l autre Nº. sur Nº.. (Voir la vue agrandie). 7. Appliquer le ruban en Téflon ou le composé pour les joints des tuyaux les tuyaux qui fournir l eau. 8. Brancher N. aux tuyaux qui fournir l eau en vissant N. avec les centres excentriques sur le raccord (fournir par les autres) et resserrer Nº. contre le mur. Soyez certain que Nº. être à sa place. L écrou en arrière le mur, fournir par les autres. Couper un peu les tuyaux qui fournir l eau si nécessaire. Le garde-boue ou le mur Le tuyau qui fournir l eau (fournir par les autres) L écrou 9. Recommencer l eau et vérifier s il y a des fuites. 6

7 Allgemeine Anleitungen Installation des Schwenkarms: Hinweis: Schwenkarme sind als erstes zu installieren. Falls der feststehende Gußauslauf installiert wird. Auf das Gewindeteil von Nr. 9 Teflonband oder Rohrkitt auftragen.. Nr. 9 fest mit der Hand in Nr. einschrauben. 9 Vergrößerte Ansicht Installation des Wasserhahns: 6. Wasser abdrehen und Wasserleitungen entleeren. Zwei Löcher mit einem Durchmesser von cm und einem Abstand von 0 cm in die Deckplatte bohren, in die Nr. installiert wird. [0 cm] Falls Schwenkarm installiert wird. Nr. 9 oder Nr. 0 in Nr. einfügen und auf dem Spültisch nach vorne drehen.. Nr. mit einem Schraubenschlüssel fest anziehen. 9 oder 0,,, Zum Reparieren des Schwenkarms oder Ersetzen von Nr. (O-Ring) und Nr. (Muffen):. Eine Nr. auf Nr. aufschieben. Nr. auf Nr. installieren und mit mitgelieferter Nr. 7 gut schmieren. Die zweite Nr. auf Nr. installieren. (Siehe vergrößerte Ansicht) 7. Teflonband oder Rohrkitt auf Wasserleitungsrohre auftragen. 8. Nr. an Wasserleitung anschließen, indem Nr. mit versetzer Mitte auf den Nippel. (nicht in der Lieferung enthalten) aufgeschraubt und gegen die Deckplatte festgezogen wird. (Mutter auf der gegenüberliegenden Deckplatte nicht in der Lieferung enthalten.) Falls erforderlich, Wasserleitungen entsprechend kürzen. wand Wasserleitungsrohr Mutter (nicht in der Lieferung enthalten) 9. Wasser andrehen und auf Dichtigkeit prüfen. 7

8 RELATED T&S BRASS PRODUCT LINE B-0-0 Surgical Sink Faucet with Built-in Stops B-0-0 Surgical Sink Faucet with Adjustable Inlet and Loose Key Stops T&S BRASS AND BRONZE WORKS, INC. A firm commitment to application-engineered plumbing products Saddleback Cove, P.O. Box 088 T & S Brass-Europe Travelers Rest, SC 9690 De Veenhoeve Phone: (86) 8-0 Oude Nieuwveenseweg 8 Fax: (86) 8-8 CW Nieuwveen tsbrass@tsbrass.com The Netherlands

9 Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one () year from the date of purchase. During this one-year warranty period, if the product is found to be defective, T&S shall, at its options, repair and/or replace it. To obtain warranty service, products must be returned to Installation and Maintenance Instructions T&S Brass and Bronze Works, Inc. Attn: Warranty Repair Department Saddleback Cove Travelers Rest, SC 9690 Shipping, freight, insurance, and other transportation charges of the product to T&S and the return of repaired or replaced product to the purchaser are the responsibility of the purchaser. Repair and/or replacement shall be made within a reasonable time after receipt by T&S of the returned product. This warranty does not cover Items which have received secondary finishing or have been altered or modified after purchase, or for defects caused by physical abuse to or misuse of the product, or shipment of the products. Any express warranty not provided herein, and any remedy for Breach of Contract which might arise, is hereby excluded and disclaimed. Any implied warranties of merchantability or fitness for a particular purpose are limited to one year in duration. Under no circumstances shall T&S be liable for loss of use or any special consequential costs, expenses or damages. Some states do not allow limitations on how long and implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. Specific rights under this warranty and other rights vary from state to state. P/N: Rev.9 Date: 0-- Drawn: TEH Checked: JRM 0-6- Approved: JHB 0-7- Pre-Rinse Spray Valve B-007 UK-007 B-007-C UK-0K B-007-J EB-007 B-0K EB-007-C B-0K-C EB-007-J B-0K-J EB-0K EB-0K-C EB-0K-J

10 Exploded View

11 PARTS KIT,, Grey Part Number Guide 6 PARTS FOR ANY GREY T&S SPRAY VALVE Ring, Hold Down #7 Washer Body, Spray Valve Grey Handle Nut, Handle Screw, Handle PARTS FOR ANY GREY BONNET ASSEMBLY,,,,,,,,,,,,,, Bonnet Assembly Stem Washer, Seat Washer, Bonnet Binding Bonnet Washer, Bonnet Brass Stem, Packing Spring, Bonnet Push Button Grease Pack GREY SPRAY VALVES B-007 (. GPM) Nipple Cup, Spray Ring, Sprayhead. GPM Sprayface Screw, Sprayface B-007-C (0.6 GPM) Assembly, B-007C Spray Nozzle 0.6 GPM Grey Shield (No Outline Around Lettering) 0.6 GPM Spray Nozzle (0.6 Stamped on Face) B-007-J (.07 GPM) Assembly, B-007-J Spray Nozzle.07 GPM Grey Shield (Square Outline).07 GPM Spray Nozzle (.07 Stamped on Face) Nozzle Holder # Parts included in B-0K # Parts included in B-0K-C # Parts included in B-0K-J

12 PARTS KIT,,6,7 Blue Part Number Guide 6 PARTS FOR ANY BLUE T&S SPRAY VALVE Ring, Hold Down #7 Washer Body, Spray Valve Blue Handle Nut, Handle Screw, Handle PARTS FOR ANY BLUE BONNET ASSEMBLY,,6,7,,6,7,,6,7,,6,7,,6,7,,6,7,,6, Bonnet Assembly Stem Washer, Seat Washer, Bonnet Binding Bonnet Washer, Bonnet Brass Quad Seal Spring, Bonnet Push Button Grease Pack BLUE SPRAY VALVES,7, EB-007 & UK-007 Only Nipple Cup, Spray Ring, Sprayhead Screw, Sprayface EB-007 (-6 GPM) -6 GPM Sprayface (No Wording on Face) UK-007 (. GPM). GPM Sprayface (Flow Rate on Face) EB-007-C (0.6 GPM) Assembly, EB-007C Spray Nozzle 0.6 GPM Blue Shield (No Outline Around Lettering) 0.6 GPM Spray Nozzle (0.6 Stamped on Face) EB-007-J (.07 GPM) Assembly, EB-007-J Spray Nozzle.07 GPM Blue Shield (Square Outline).07 GPM Spray Nozzle (.07 Stamped on Face) Nozzle Holder # Parts included in EB-0K # Parts included in EB-0K-C #6 Parts included in EB-0K-J #7 Parts included in UK-0K

13 To replace worn parts: General Instructions. Shut off water supply and drain lines. For ease of disassembly and reassembly, the handle grip can be removed from no... Unscrew no. and no.6 to remove no.. Unscrew and remove no. from no... Hold no.0 with pliers in one hand, and with screwdriver, carefully unscrew no. from no For EB-007/UK-007 & B-007 ONLY: To replace no.9, unscrew no. and disassemble. Make sure the groove side of no.9 fits over no.8, and no.0 rest on ridge side. See Figure A. 9. To replace no., unscrew handle grip from no. and replace with new no.. 0. Reassemble; turn on water check for leaks. Figure A handle grip. Apply no. over smooth portion of no.. Replace no., no., no.7, no.8 & no.9 with new parts. Dab no. onto valve side of no.9 before replacing apply no. here. For EB-007-C, EB-007-J, B-007-C & B-007-J ONLY: To replace no., slide no. off no., and slide a new no. back onto no.. No. will snap into groove on no.. See Figure B. * Verify the flow rate on no. matches spray tip inside no.. Figure B. Reassemble no. by inserting no. through all parts. Hold no.0 with pliers, and carefully screw no. into no.0 until screw feels tight. Do not use excessive force. 6. Reinsert no. in no. and tighten securely. 7. Reassemble no., no. and no.6 on no.. Caution: Turn off water supply at base faucet when not in use.

14 RELATED T&S BRASS PRODUCT LINE B-008 JeTSpray Spray Valve B-008-C JeTSpray Low Flow Spray Valve T&S BRASS AND BRONZE WORKS, INC. A fi rm commitment to application-engineered plumbing products Saddleback Cove, P.O. Box 088, T & S Brass-Europe Travelers Rest, SC 9690 De Veenhoeve Phone: (86) 8-0 Oude Nieuwveenseweg 8 Fax: (86) 8-8 CW Nieuwveen tsbrass@tsbrass.com The Netherlands