Store guidance develop customer s loyalty!

Transcription

1 CATEGORY & IN-STORE COMMUNICATION PROFILE FOR POSTERS Our profiles hold and support your posters, signs and poster sleeves from the thinnest paper to thick cardboard. Graphics can be changed in seconds with the re-usable snap open and snap close hinge function.» Store guidance develop customer s loyalty! Accessories are at the heart of every system. Most of our suspension accessories can be loaded from the bottom and provide the possibility of suspending flush or perpendicular to the overhead rails. It also means a secured process for the store personnel when changing the marketing message in the posters. 136

2 PROFILES FOR POSTERS PROFILES FOR POSTERS SNAP OPEN, SNAP CLOSE Our range includes an extensive number of possible display configurations so that you will always be able to find a solution to suit your specific needs. To save your time and money, we have made the system extremely easy to use. The signs and poster sleeves holds and supports your posters from the thinnest paper to 3 mm cardboard. Aluminium overhead rails with snap open end caps will allow you to side load new fixtures and poster profiles at any time. 137

3 CATEGORY & IN-STORE COMMUNICATION POSTER GRIPPERS GRIPPER-R- GRIPPER- Free hanging poster and sleeve snap-profile GRIPPER will hold and support your posters, signs and poster sleeves in an attractive and reliable way. Graphics are changed in seconds with the re-usable snap open and snap close hinge. Use the multi-purpose loop MPH for ceiling suspension. For heavier or longer installations combine in advance with MINI-TRAK. Holds plastic and paper graphics from 0.1 to 3.0 mm thickness (up to approximately 1.5 mm when GRIPPER is used inside MINI-TRAK). Standard lengths: 210, 297, 400, 420, 500, 594, 600, 700, 800, 841, 1000 and 1200 mm. Other lengths on request. Standard colours: Transparent, white and black. Number per carton: 50. MG- Poster and sleeve snap-profile for walls For horizontal or vertical wall mounting of your messages. Provided with 19 mm tape. Holds plastic and paper graphics from 0.1 to 3.0 mm thickness. Standard lengths: 210, 297, 420, 500, 594, 700, 841 and 1000 mm. Other lengths on request. Colours: Transparent, white and black. Number per carton: 50. Multiple poster snap profile for suspended use Graphics are changed in seconds with the re-usable snap-open and snap-close hinge. The snap fronts can be opened separately for each poster. Use the loop MPH for ceiling suspension. Fully compatible with MINI-TRAK, STAR-TRAK and AS-ARM solutions. Holds plastic and paper graphics from 0.1 to 3.0 mm thickness. Available in different combinations, for example 3xA6, 5xA6, 3xA5, 3xA4 and so on. etween every front there is an additional space of 5 mm. Colours: Transparent, white and black. Number per carton: 50. GSH Suction cup hook for the poster profiles GRIPPER-R and MGR Provided with tape for attachment to the slat back-side of the poster profiles. To be used with the Jegab suction cup Total width: 50 mm. Number per bag: 50. GWH Wall hook for the poster profiles GRIPPER-R and MGR Provided with tape for attachment to the slat backside of the poster profiles. Hole diameter: 6 mm. Total width: 50 mm. Number per bag:

4 PROFILES FOR POSTERS MPH Suspension loop for GRIPPER and MINI-TRAK This elegant loop clip will give the final touch when hanging your GRIPPER, MINI-TRAK or the aliminium frames LONDON. Click on or slide on attachment. The two way loop can be used for 0 and 90 suspension, or it can be used with ball cables. Maximum weight per loop: 2 kg with aluminium profiles, 1 kg with GRIPPER. Colours: Transparent, white and black. Number per bag: 20. MGR Multiple poster snap profile for walls and windows Graphics are changed in seconds with the re-usable snap-open and snap-close hinge. The snap fronts can be opened separately for each poster. Use the loops GWH and GSH for wall or window suspension. Holds plastic and paper graphics from 0.1 to 3.0 mm thickness. As standard, provided with 19 mm tape. When used with GWH or GSH, order the MGR poster profile without tape. Available in different combinations, for example 3xA6, 5xA6, 3xA5, 3xA4 and so on. etween every front there is an additional space of 5 mm. Colours: Transparent, white and black. Number per carton: 50. PROFILES FOR POSTERS 3034 Suspension loop for poster holder 3030 For ceiling or wall hanging of poster holder Number per bag: 100. Number per carton: Poster holder profile A poster gripper for thinner and lighter substrates. Use the 3034 loop for suspension. Colours: White and black, others on request. Number per carton: 50. PL-TP- Wall poster holder with tape Standard length: 1000 mm. Other lengths on request. Number per carton:

5 CATEGORY & IN-STORE COMMUNICATION PHAL- PM-TP- Small wall poster holder with tape 9 mm high. With tape on the back. Number per carton: 50. Aluminium wall poster profile with locking rolls The integrated rolls will hold your paper posters safely locked in place inside this wall hanging profile. The posters are simply stuck in from underneath and locked in a second. Posters are released by lifting them upwards or up/ outwards movements. Supplied with 2 suspension holes and foam tape pads. Lengths: 500, 600, 700 and 1000 mm. Colours: Natural anodised aluminium and White RAL Colour End caps: lack. Number per box: 10 or 20. POSTER-SNAP Aluminium poster snap profile for wall use. Will give stable top and bottom support to your posters in paper, wovens, etc. Snap open, insert graphics, snap close. 1 set comes with foam tape on the back-side, 2 suspension hooks and 2 end caps. Lengths: 423, 603, 710, 844 and 1003 mm. Colour End-caps and Hooks: lack. Colour profile: Natural anodized aluminium. Number per unit: 1. MINI-LOOP-D Suspension hook for MINI-TRAK and MINI-SNAP A reliable and heavy duty suspension loop for these aluminum poster profiles. Delivered with 2 locking screws per loop. Loop height: 15 mm. Inserted length: 75 mm. Number per bag: 12. MINI-TRAK Free hanging aluminium poster profile This beautiful profile gives you an unmatched number of sign hanging solutions. MINI-TRAK is the stable support for the integratable poster holder GRIPPER, poster gripper rolls G-ROLL or for use with SIGN-LOCK for thicker substrates. Use MPH or MINI-JOIN for suspension and MINI-END as end-piece. Standard lengths: 503, 597, 703, 844, 1003 mm. Colours: Natural and champagne anodized aluminium, green RAL 6029, red RAL 3020, grey RAL 9007 and white RAL Dimensions: Height 29 mm, width 31 mm. Number per box:

6 PROFILES FOR POSTERS MINI-END End-cap for MINI-TRAK and MINI-SNAP A chic finish for these aluminium poster profiles. The end-cap can simply be opened by twisting around, and accessories are easily side loaded without taking the end-cap off. Standard colour: lack. Number per bag: 12. G-ROLL Poster gripper rolls for MINI-TRAK G-ROLLS will lock your paper posters safely and quickly inside MINI-TRAK. Posters are simply inserted from underneath and locked in seconds and are released by pushing one G-ROLL upwards and at the same time sliding the message sidewards/downwards. Colour: lack. For poster thickness up to appr. 0.5 mm. The 45 mm rolls are recommended for messages up to A5 portrait. Larger than A5 portrait use the 82 mm rolls. Number per bag: 45 mm rolls; 11 or 15. Number per bag: 82 mm rolls; 8 or 12. PROFILES FOR POSTERS SIGN-LOCK Heavy-duty slide-in clip for MINI-TRAK For practical and secure hanging of heavier and thicker substrates together with MINI-TRAK. Enter the clips through punched holes at the top edge of the graphic, and simply side load into the aluminum profile. Use a minimum distance between the upper hole edge and the top edge of signage of 4 mm. Holds substrates up to 3 mm thickness in MINI-TRAK. Dimensions: 2 mm wire and 13 mm total width. Number per bag: 20. POSTER SLEEVES DA-MR Double sided poster sleeve with metal rings Non reflective material. Available in A4, A3, A2 and 500x500 mm. Other sizes on request. Also available as DA-2H, with holes but without metal rings or as DA without holes. Number per unit:

7 CATEGORY & IN-STORE COMMUNICATION DA-SG Double sided poster sleeve with holes for SKYGRIP and SKY-CLIP This poster sleeve is specially designed to fit the drop and hang device SKYGRIP. Available in sizes A4, A3 and the following heights/widths: 500x350, 500x500 mm. Other sizes available on request. To hang sleeves wider than 500 mm with SKYGRIP, we recommend a combination with the poster holder GRIPPER. Number per carton: 10. D1 Poster sleeve with metal rings and opening front Available in sizes A4, A3 and the following heights/widths: 700x500 and 1000x700 mm. Customised sizes available on request. Number per carton: 10. HIGHLIGHT-S, HIGHLIGHT-D Magnetic sleeves for OH use Highlight is a range of poster holders especially designed to be used with the MGT-16 magnets from HL s Jegab assortment. The MGT-16 magnet is hold into a fixed and up-raised position, so that installations can be done by just holding the poster sleeves at the bottom line. In small sizes Highlight will be a good substitute to welded pockets. The advantage with Highlight compared to welded pockets is that it does always show the front to the consumers. Material: 0,5 0,7 mm, Transparent Packing: Depending on design and dimensions. AVANTI-WALL Convex wall or window poster sleeve Sizes: A4 and A3, other sizes on request. Non reflective material. Available with tape, foam tape or magnetic tape. Number per carton: 10. AVANTI-IVISION Double convex poster sleeve Available in sizes A4 and A3. Other sizes available on request. Please contact us for modifications with metal rings or to fit SKY-CLIP and SKYGRIP. Number per carton:

8 PROFILES FOR POSTERS D Wall or window poster sleeve with tape Standard sizes: A5 and A4. Customised sizes available on request. Number per carton: 10. WINDOWMOUNT Electrostatic poster holder for glass surfaces Electrostatic posterholder for glass. Ideal for frequently changed messages where adhesive tape would soon lose its ability to hold. Available in standard sizes from A7 to A1. Number per carton: 10. PROFILES FOR POSTERS POSTER FIXTURE ARMS AS-ARM-SCSW-KIT Window fixture kit with suction cups and hooks 9 mm aluminum tube with large suction cups for reliable use on glass doors and windows. Each suction cup has a tag for easy removal. The sign hanging hooks are integrated in the tube and can slide for width adaptation. Standard tube lengths: 400 and 780 mm. Others on request. Maximum graphic or poster sleeve weight: 1,2 kg. Tube colours: White or natural anodized aluminium. Each KIT comes fully assembled and ready to use, containing: Tube, 2 end-caps, 2 hanging hooks and 2 suction cups. Number per carton: 20 KIT. AS-ARM-SCSW-G-KIT Window fixture kit with suction cups and GRIPPER 9 mm aluminum tube with large suction cups for reliable use on glass doors and windows. Each suction cup has a tag for easy removal. The poster holder GRIPPER, which also holds plastic poster sleeves is integrated in the aluminum tube. Use 2 KIT per graphic when bottom fixation is requested. Available for poster widths: 297, 420, 500, 600, 700 and 840 mm. Other widths on request. Maximum graphic or poster sleeve weight: 1.2 kg. Tube colours: White or natural anodized aluminium. Each KIT comes fully assembled and ready to use, containing: Tube, 2 end-caps, 1 GRIPPER profile and 2 suction cups. Number per carton: 20 KIT. 143

9 CATEGORY & IN-STORE COMMUNICATION MGT-90 Magnet for fixation of UF- fixing arms A 7 kg magnet to attach UF- profiles to vertical or horizontal surfaces. White housing and transparent clip. Also compatible with HL Frames. Number per bag: 10. UF- Frame aluminium profile Profile in aluminium, with tracks. Available in the standard colours: Natural anodised aluminium, white, red, blue, yellow and black. Can be used with all the different frame clips. Available in different lengths and in both straight and curved design with 50 mm radius. Can be used together with end cap , see chapter Jegab. LP-CL Clip on loop for UF- fixing arms Simplifies the suspending of poster grippers, poster sleeves or signs by hooks, S-hooks or rings. Compatible with HL Frames. Number per bag: 20. AC-CL-0025, AC-CL-0105 Multi grip clip for UF- fixing arms For attaching signs directly to UF-. Recommended sign thickness: 0,5-3 mm. Also compatible with HL Frames. Number per bag: 20. USSTOP-FL Telescopic L arm for posters or Frames With a flat foot. Ideal to create signage together with all types of on the floor exposed merchandise. To suspend posters up to 425 mm wide or Frames up to A2/A3L. Posters are suspended by using GRIPPER PIPER. To suspend Frames use S-CL. Height: mm. Foot dimensions: 290x365 mm. Color: Chrome plated. Number per carton: 5 144

10 PROFILES FOR POSTERS USSTOP-FT Telescopic T arm for posters or Frames With a flat foot. Ideal to create signage together with all types of on the floor exposed merchandise. To suspend 2 posters up to 425 mm wide or 2 Frames up to A2/A3L. Posters are suspended by using GRIPPER PIPER. To suspend Frames use S-CL. Height: mm. Foot dimensions: 290x365 mm. Color: Chrome plated. Number per carton: 5 USSTOP-PL Telescopic L arm for posters or Frames With a pallet-foot. Ideal to create signage together with all types of on the floor exposed merchandise. To suspend posters up to 425 mm wide or Frames up to A2/A3L. Posters are suspended by using GRIPPER PIPER. To suspend Frames use S-CL. Height: mm. Foot dimensions: 215 x 380 x 45 mm. Color: Chrome plated. Number per carton: 5 PROFILES FOR POSTERS USSTOP-PT Telescopic T arm for posters or Frames With a pallet-foot. Ideal to create signage together with all types of on the floor exposed merchandise. To suspend 2 posters up to 425 mm wide or 2 Frames up to A2/A3L. Posters are suspended by using GRIPPER PIPER. To suspend Frames use S-CL. Height: mm. Foot dimensions: 215 x 380 x 45 mm. Color: Chrome plated. Number per carton: 5 PIPER- GRIPPER adapter for the use with US STOP PIPER is simply clicked onto both GRIPPER and US STOP. The maximum PIPER length for use with US STOP is 297 mm, but this can be combined with a GRIPPER length of 420 mm to suspend A2 or A3 landcape posters. For more information about GRIPPER see Poster Grippers in this chapter. Length 297 mm, others on request. Number per unit: 25. AS-POP Telescopic Poster or Frame arm system The system is supplied in three easy to assemble parts for a maximum of customized options. 1. Feet (AS-MGT-FIX, FOT-ML, FOT-ML-Round, FOT-MLH-Outdoor, FOT-PL) 2. Telescopic rods (AP-ROD) 3. T or L arms with hooks, GRIPPER or FLUG (AP-ARM) 145

11 CATEGORY & IN-STORE COMMUNICATION AP-ARM-T, AP-ARM-L Arms for AS-POP Available as double T or single L arms. With GRIPPER for posters (G). With Sign Hooks for signage with holes (H). With FLUG to suspend Frames (F). Comes fully assembled and ready to use including end-caps. Color: Natural anodized aluminum and grey. Number per unit: 20/box AP-ARM-T-H A4, AP-ARM-T-H A3, AP-ARM-T-H A2, AP-ARM-T-G A4, AP-ARM-T-G A3, AP-ARM-T-G A2, AP-ARM-T-F A4, AP-ARM-T-F A3, AP-ARM-T-F A2, AP-ARM-L-H A4, AP-ARM-L-H A3, AP-ARM-L-G A4, AP-ARM-L-G A3, AP-ARM-L-F A4, AP-ARM-L-F A3 AP-ROD Telescopic rod for AS-POP Available in three adjustable lengths. After adjusting them to the length of choice, the rods can be locked in that position. Comes fully assembled and ready to use. Color: Natural anodized aluminum and grey. Number per unit: 20/box AP-ROD AP-ROD AP-ROD AS-MGT-FIX Magnet foot for AS-POP Stable construction and a very strong magnet for real straight installations. Number per unit: 10/box Color: Grey CANOPY SYSTEMS AND FIXTURES CAN-KIT-M-G Adjustable magnetic canopy fixture with snap profiles The strong magnet with fixed but various angles can be placed on horizontal, vertical or angled metal surfaces. With an integrated sign holder providing snap open and snap close mechanism for quick and easy message changes. Includes supporting back-strip with tape to ensure graphics do not curve. For card board or plastic signs up to 3,0 mm thickness. Standard available for sign heights 250 and 400 mm. Other heights on request. Allows contoured top design. Standard length back-strip: 800 mm for widths up to 1000 mm. Tube colours: White or natural anodized aluminium. Each fixture is supplied assembled and ready to use, containing: Magnet, 9 mm tube, end-cap, 1 GRIPPER profile. Use 1 left 1 right fixture 1 back-strip per canopy. Number per carton: 10 left and 10 right fixtures 10 back-strips = 10 canopy KIT. 146

12 PROFILES FOR POSTERS ESP1 Canopy rail for vertical surfaces A very easy to use and cost effective canopy sign support. Designed for use on vertical surfaces and providing an optimal reading angle of the message. Provided with 2 x 19 mm foam tape. Lengths: 1250, 1300 and 1325 mm. Color: White RAL Designed for use with 4,0 mm thick foamed PVC, such as Forex etc. Number per box: 24. ESP2 Canopy rail for horizontal surfaces A very easy to use and cost effective canopy sign support. Designed for use on horizontal surfaces and providing an optimal reading angle of the message. Provided with 2 x 19 mm foam tape. Lengths: 1250, 1300 and 1325 mm. Color: White RAL Designed for use with 4,0 mm thick foamed PVC, such as Forex etc. Number per box: 24. PROFILES FOR POSTERS INFORAIL-C Canopy or single sided freezer rail Creates 103 mm (99 mm with IDK-99) additional space for product and pricing information. Holds printed graphics directly or in combination with the Datastrip IDK-99. Signs and IDK-99 are easily front loaded. To be used with the INFO-END pieces.attachment by screws, foam tape, SGJ, most HL Frame fixtures (for example MGT-90) or just simply hung over an edge. INFORAIL-C-2H: With 2 holes through the front for screw attachment to walls ( 3 holes for length 2000 mm). INFORAIL-C-TF-S: With 12 mm foam tape for free standing use. INFORAIL-C-TF-W: With 12 mm foam tape for wall use. Colours: Natural anodized aluminium and white RAL Lengths: 661, 891, 991, 1321, 2000 and. Others on request. Inserted messages should have a height of 107 mm (for substrates up to 1,0 mm thickness) and a length 1,0 mm shorter than the chosen length of the aluminium profile. Number per carton: 6. INFO-END End cap for INFORAIL-C Stylish end-piece for INFORAIL-C. Standard colour: lack and silver/grey. Number per bag: 12 (6 left 6 right). IDK99 Datastrip for INFORAIL-C and CATRAIL Curved Datastrip with label height 99 mm to protect your messages and save time as signage changes can be implemented in seconds. The strip is side or front loaded into the INFORAIL-C or CATRAIL. Standard colour: Transparent. Number per carton:

13 CATEGORY & IN-STORE COMMUNICATION TPL-COVER Protecting message cover for INFORAIL-C and CATRAIL Protects your paper inlays. Supplied with a finger grip for easier opening. Can be provided with printed graphics. Lengths: 660, 890, 990, 1320 mm. Other lengths on request. Material: Transparent, 0,5 mm. Number per carton: 50. TPL-INFO In-fill strip for INFORAIL-C and CATRAIL To be printed with for example vertical segmentation or educational purchasing information. With a finger grip for easy removal from the INFORAIL. Lengths: 660, 890, 990 and Others on request. Material: White 0,5 mm. Number per carton: 50. CAN-KIT-IFTC Magnetic and double sided canopy profile For horizontal signage and segmentation. Extruded board with inside tracks for holding signs and information cards. Height: 105 mm. Available in customized lengths. Standard colours: Green, red and black. Number per box: 10. Contains: 1. IFTC-Height-colour-length. 2. IFTC-Height-colour-END (2x). 3. MGT-12K. (2x). ANNER STANDS XTEND anners stand size adjustable XTEND is a banner stand that is easy and quick to set-up without the need for any tools. Set-up or signage changes are easily done without any tools. For banners with 4 eyelets. anners sizes from 600x1600 mm up to 800x1800 mm (adjustable). Eyelet size: 10 mm inner diameter. Colour: White tubes and ocean blue details. Number per unit: 1 per non-woven bag/box 148

14 PROFILES FOR POSTERS PROFILES FOR POSTERS 149

15 CATEGORY & IN-STORE COMMUNICATION EFFECTIVE SIGNAGE Guiding consumers through out your shop lay-out by effective overhead signage will increase footfall in general. Enhanced excitement in the categories will consciously or unconsciously go beyond our rational perception and increase the number of actual purchases. In the overhead signage range you will find everything you need to hang posters, graphics and frames.» Help your consumer find their way around your store! In combination with the HL Skyline system an endless number of possibilities are available to combine frames and other products including poster holders, price cassettes and freezer systems. Hanging frames from the ceiling with HL Displays system Sky-Trak is quick and easy and the slim but sturdy structure allows optimum use of the space below. 150

16 OVERHEAD & FLOOR SIGNAGE OVERHEAD AND FLOOR SIGNAGE HIGH PERFORMANCES Our aluminium systems Catrail, Mini- Trak and Mini-Snap are the ideal overhead systems and by attaching additional features it will allow you to combine overhead signage with for example category guidance and pricing information. Integrated side tracks make the addition of extra features possible allowing you to slide in your graphics or the use of large data strips for easy changing and protection of your messages. 151

17 In-Line 3000 Mini CATEGORY & IN-STORE COMMUNICATION ORDERING GUIDE - SKYLINE OVERHEAD SYSTEMS SkyLine overhead systems based on MINI-TRAK - carries medium heavy loads: Needed in-going parts: Number of units: Mini-Trak Mini-End 2 Mini-Loop-D 2 In-Line 6000 Mini Needed in-going parts: Number of units: Mini-Trak Mini-End 2 Mini-Loop-D 2 Mini-Join-D 1 In-Line 9000 Mini Needed in-going parts: Number of units: Mini-Trak Mini-End 3 Mini-Loop-D 2 Mini-Join-D 2 Square 3000 x 3000 Mini Needed in-going parts: Number of units: Mini-Trak Mini-End 4 Mini-Loop-D 4 Mini-Join-D 4 Square 6000 x 3000 Mini Needed in-going parts: Number of units: Mini-Trak Mini-End 4 Mini-Loop-D 4 Mini-Join-D 2 Mini-Flex-D 6 Square 9000 x 3000 Mini Needed in-going parts: Number of units: Mini-Trak Mini-End 4 Mini-Loop-D 4 Mini-Join-D 4 Mini-Flex-D 8 152

18 OVERHEAD & FLOOR SIGNAGE SkyLine overhead systems based on STAR-TRAK - for heavy installations: In-Line 3000 Star Needed in-going parts: Number of units: Star-Trak Star-End 2 Star-Loop-D 2 In-Line 6000 Star Needed in-going parts: Number of units: Star-Trak Star-End 2 Star-Loop-D 2 Star-Join-D 1 OVERHEAD AND FLOOR SIGNAGE In-Line 9000 Star Needed in-going parts: Number of units: Star-Trak Star-End 2 Star-Loop-D 2 Star-Join-D 2 Mini-Flex-D 2 Square 3000 x 3000 Star Needed in-going parts: Number of units: Star-Trak Star-End 4 Star-Loop-D 4 Star-Join-D 4 Square 6000 x 3000 Star Needed in-going parts: Number of units: Star-Trak Star-End 4 Star-Loop-D 4 Star-Join-D 2 Star-Flex-D 6 Square 9000 x 3000 Star Needed in-going parts: Number of units: Star-Trak Star-End 4 Star-Loop-D 4 Star-Join-D 4 Star-Flex-D 8 153

19 CATEGORY & IN-STORE COMMUNICATION OVERHEAD RAIL SYSTEMS STAR-TRAK Heavy-duty aluminum overhead profile This elegant profile is the universal tool for creating smart, multi functional ceiling systems. A wide range of practical accessories are available for STAR-TRAK: connectors, frame fixtures, several sign and poster sleeve fixtures, integrated poster gripper profiles, poster gripper rolls and so on. Most accessories can be both side and bottom loaded. Standard lengths: 2 and 3 meters. Colours: Natural anodized aluminium and white RAL Please contact us for other lengths. Dimensions: Height 48 mm, width 31 mm. Number per box: 24. STAR-END End-cap for STAR-TRAK The STAR-END end-piece adds the finishing touches to STAR-TRAK. It can be opened simply by twisting round, all accessories are easily side loaded without taking the end-cap off. Standard colour: lack. Number per bag: 12. STAR-/CAT-LOOP Suspension loop for STAR-TRAK For heavy duty use. Each loop comes with 2 screws for securing to the top of STAR-TRAK. Inside loop height: 15 mm. Inserted length: 75 mm. Number per unit: 12. STAR-JOIN In-line connector with suspension loop for STAR-TRAK Use STAR-JOIN if you want to couple two STAR-TRAK s in a stable straight line. Suspension loop integrated. Each set contains: 1 locking profile with integrated loop, 2 screws and 1 anti-twist bar. Inside loop height: 15 mm Locking profile length: 75 mm. Anti twist bar length: 200 mm. Number per unit: 1 set. STAR-FLEX Corner, T and Cross connector for STAR-TRAK A user friendly connector to create L, T and X connections. STAR-FLEX creates whole ceiling systems without the need to cut the aluminium bars. Easily clicked on during the assembly process and securely locked with a screw. y releasing the screw, you can either unlock or remove the connection or just slide the entire rail into another position. Creates a distance of 22 mm between the two meeting aluminium profiles. Standard colour: lack. Number per bag:

20 OVERHEAD & FLOOR SIGNAGE MINI-TRAK Aluminium overhead and sign holder profile This well-engineered profile gives you an unrivalled number of sign hanging solutions. MINI-TRAK is a stable support for a wide range of accessories, containing frame, sign and poster sleeve fixtures, integrated poster gripper profiles, poster gripper rolls and so on. Most accessories can be both side and bottom loaded. Lengths: 503, 603, 703, 865, 1003, 1295, 1503, 2000 and. Colors: Natural anodised aluminium, White RAL 9010 and Red RAL3020. Please contact us for other lengths. Dimensions: Height 29 mm, width 21 mm. Number per box: 24. MINI-END End-cap for MINI-TRAK This stylish end-piece turns MINI-TRAK into a chic overhead rail. It can be opened simply by twisting round; accessories are easily side loaded without removing the end-cap. Standard colour: lack. Number per bag: 12. OVERHEAD AND FLOOR SIGNAGE MINI-LOOP Metal suspension loop for MINI-TRAK Delivered with 2 locking screws per loop. Inside loop height: 15 mm. Inserted length: 75 mm. Number per unit: 12. MINI-LOOP-D Suspension loop for MINI-TRAK MINI-LOOP-D is part of our stylish range of accessories for MINI-TRAK (see also MINI-JOIN-D and MINI-FLEX-D). Side loaded into MINI-TRAK. Colour: lack. Number per unit: 12. MINI-JOIN-D In-line connector with suspension loop for MINI-TRAK The MINI-JOIN-D enables a connection of two MINI-TRAK s in a stable straight line. This connector allows all suspension accessories to be used, and slided, right under the point of connection. A suspension loop is integrated. Total inserted length: 150 mm. The set includes two locking screws. Colour: lack. Number per unit: 1 connector set. 155

21 CATEGORY & IN-STORE COMMUNICATION MINI-FLEX-D Angle adjustable L, T and X connector for MINI-TRAK A user friendly connector to create L, T and X connections. MINI-FLEX-D creates whole ceiling systems without the need to cut the aluminium bars. Easily clicked on or slid into the position of choice during the assembly process and securely locked with a metal key. The connector can be locked at 90 angles or used at an angle free of choice between 45 and -45. All accessories can be used right under the connection point. Comes complete with 1 locking key and 1 screw per connector. Creates a distance of 10 mm between the two meeting aluminium profiles when used in the locked 900 angled mode. Colour: lack. Number per bag: 12 connector sets. MICRO-TRAK OH rail extra small Elegant and discrete over-head rail to suspend lighter signage. Especially suited to be used above freezers, low gondolas or pallet isle lands. The MICRO-TRAK shares many of HL s other standard components for OH-rails. Can be suspended with MPH, MINI-LOOP and SKYGRIP. New special MICRO-TRAK accessories are; MICRO-END, MICRO-CORNER, MICRO-FLEX and STR-LINE-MICRO. MICRO-END MICRO-TRAK end-cap Side loaded black end-cap. No tools needed. Color : lack Packing : 48/unit MICRO-CORNER MICRO-TRAK L connector To make L corner connections. Assembling is done by simple side loading, no tools needed. Color : lack Packing : 48/bag MICRO-FLEX MICRO-TRAK T connector Creates T connections without the need of cutting the aluminum over-head rail. The bottom accessory track remains 100% available for the suspension of signage, also right under the point of connection. Due to the side loading and twist locking mechanisms, no tools are needed. Color : lack Packing : 48/bag 156

22 OVERHEAD & FLOOR SIGNAGE STR-LINE-MICRO MICRO-TRAK suspension rail Profile with holes for easy suspension of signage and Frames by hook accessories. Side loaded into the aluminum MICRO-TRAK. Dimensions : Holes Height 6 mm, Width 9 mm. cc between the holes: 18 mm. Length : 998 mm Color : Transparent. Packing : 48/box NINE-LINE Aluminium rail with holes This aluminum profile is a combination of the MICRO-TRAK and the STR-LINE- MICRO. Despite it s small dimensions it has a good vertical stiffness that keeps it straight even when loaded with a bit heavier weights. It is compatible with all MICRO-TRAK accessories. Can be suspended with MPH, MINI-LOOP and SKYGRIP. Dimensions : Holes 9 x 9 mm and 9 mm between the holes (cc 18 mm). Length : 2000 mm Color : Natural anodized aluminium Packing : 24/box OVERHEAD AND FLOOR SIGNAGE CATRAIL- Overhead signage rail in aluminum The outside of this rail is easily dressed up with category and sub-category signs. Also the Datastrip IDK-99 can be side loaded or frontclicked, and will provide an easy exchange of the graphics. The list of practical hanging accessories contains several hooks and loops, frame fixtures, heavy-duty sign fixtures, integrated poster gripper profiles and so on. Most accessories can be inserted directly from underneath. CATRAIL always has to be used with at least 2 x CAT-ASE. Standard lengths: 2 and 3 meters. For dress-up signage with a height of 107 mm. Standard colours: Natural anodized aluminium, green RAL 6029, red RAL 3020 and white RAL Dimensions: Height 106 mm, width 120 mm. Number per box: 12. CAT-END End-caps for the CATRAIL Sophisticated end-piece for CATRAIL. Colour: lack or silver/grey. Number per bag: 12. CATRAIL XL Large category tent for open freezers and category segmentation Total height for signage is 140 mm. Can also be used for 3x39mm or 2x52mm height datastrips. Standard lengths 2,5 and 3m. 157

23 CATEGORY & IN-STORE COMMUNICATION CAT-END XL End-cap for CATRAIL XL End-piece for CATRAIL XL. Standard colour: lack. CAT-ASE Aluminum top for CATRAIL CAT-ASE together with CAT-LOOP forms a reliable snap-on suspension for CATRAIL. Colour: Natural anodised aluminium. Dimensions: Lenghts 95 and 300 mm, width 91 mm. Other lengths on request. Number per box: 24. STAR-/CAT-LOOP Suspension loop for CATRAIL For heavy duty suspension of CATRAIL. To be used together with CAT-ASE. Delivered with 2 locking screws per loop. Loop height: 15 mm. Inserted length: 75 mm. Number per unit: 12/bag. CAT-JOIN In-line connector for CATRAIL Use CAT-JOIN if you want to couple two CATRAIL s in a stable straight line. Each set contains: 1 locking profile, 2 screws and 1 anti-twist bar. (For ceiling suspension of in-line connected CATRAIL s use CAT-ASE length 300 mm and CAT-LOOP.) Locking profile length: 75 mm. Anti twist bar length: 200 mm. Number per unit: 1 set. 158

24 OVERHEAD & FLOOR SIGNAGE OVERHEAD RAIL ACCESSORIES SKYGRIP SKYGRIP-MGT Universal and twistable drop and hang device This easy-to-use hanger gives you an unrivalled number of reliable sign hanging solutions. Adjustments can be made using the SKYROD by simply lifting up or down while standing on the retail floor. The rail grip is compatible with most available overhead profiles on the market, as well as with ceiling grids. The sign grip can be twisted and locked into several positions with steps of 45 degrees. SKYGRIP directly holds poster sleeves (DA-SG) or signs, but also the poster holder GRIPPER or the aluminium poster profiles MINI-SNAP, MINI-TRAK and LONDON. To suspend HL Frames, use the FRAD-SG adapter. Handles maximum weight of 3 kg. For poster sleeves with 2 x 5 mm holes, cc 195 mm. Maximum distance from upper edge of the hole to upper sleeve edge 5 mm. Number per box: 20. Magnetic SKYGRIP Ceiling sign holder with a strong magnet. Easy-up and easy-down principle as it can be handled while standing on the floor by using the telescopic SKY-ROD. SKYGRIP-MGT holds sign and frames with the following configurations: For signage with weights up to 1 kg, but the maximum weight is very much depending on the steel thickness in the surface where it is placed. Colour: Transparent sign holder and metal magnet housing. Magnet foot diameter: 40 mm Number per box: 20/box OVERHEAD AND FLOOR SIGNAGE SKYROD Telescopic rod to handle SKYGRIP from the floor Using the telescopic SKYROD, overhead signage can be easily adjusted while standing on the retail floor. SKYROD is specially designed with an adapter to drop and hang the SKYGRIP. The telescopic pole is easily locked in different lengths by twisting the pipes. Length cm, 3 telescopic pipes. Colour: Natural anodized aluminium. Packing: 1/bag and 3 per outer carton box. GRIPPER Poster and sleeve snap-profile for overhead rails GRIPPER will hold and support your posters, signs and poster sleeves in an attractive and reliable way. Graphics are changed in seconds with the re-usable snap open and snap close hinge. Gripper is easily side loaded or clicked in from underneath with STAR-TRAK, MINI-TRAK, CATRAIL and SKYGRIP, and can be opened at any time for graphic change. GRIPPER used as a poster holder holds plastic and paper graphics from 0.1 to 3 mm thickness. GRIPPER used inside one of the aliminium profiles holds substrates up to approximately 1.5 mm thickness. Standard lengths: 210, 297, 400, 420, 500, 594, 600, 700, 800, 841, 1000 and 1200 mm. Other lengths on request. Standard colours: Transparent, white and black. Number per carton: 50. G-ROLL Rapid-up poster gripper rolls These easy-to-use G-ROLLS provide the quickest method to secure and exchange paper or thin cardboard messages when used with STAR-TRAK or MINI- TRAK. Inserting is locking, pushing one G-ROLL upwards is releasing by sliding the message side-wards/down-wards at the same time. Colour: lack. For poster thickness up to appr. 0.5 mm. The 45 mm rolls are recommended for messages up to A5 portrait. Larger than A5 portrait use the 82 mm rolls. Number per bag: 45 mm rolls; 11 or 15. Number per bag: 82 mm rolls; 8 or

25 CATEGORY & IN-STORE COMMUNICATION PIPE9 To hold fabric banners sewn with a fold The aluminium PIPE9 will secure your fabric banners inside STAR-TRAK, MINI-TRAK, CATRAIL, STR and STRS. Simply side-load into the aluminium overhead rails. Pipe diameter: 9 mm. Pipe lengths: 500, 700 and 1000 mm. Others on request. Colour: Natural anodized aluminium. Number per box: 24. MPH Multi-functional loop clip for overhead rails This loop is inserted or released directly from underneath the overhead rails STAR-TRAK, MINI-TRAK, CATRAIL, STR and STRS. The two way loop can be used for 0 and 90 suspension. Colours: Transparent, white and black. Number per bag: 20. STR-LINE-13 In-line loop profile for overhead rails To be inserted in the overhead rail STAR-TRAK, CATRAIL, STR and STRS. Simplifies the suspending of poster grippers, frames and poster sleeves by hooks. The holes are placed with cc 40 mm. Also available with tape on the base. Number per carton: 25. STRM-LINE-13 In-line loop profile for MINI-TRAK To be inserted into the overhead rail MINI-TRAK to simplify the suspension of poster grippers, frames and poster sleeves by hooks or the specially designed SKY-CLIP. Also available with tape on the base. The holes are placed with cc 40 mm. Number per carton:

26 OVERHEAD & FLOOR SIGNAGE SIGN-LOCK STR-HOOK Sliding heavy-duty clip for overhead rails To hang heavier or thicker substrates from STAR-TRAK, MINI-TRAK, CATRAIL, STR or STRS. The SIGN-LOCK clip provides a practical and secure solution. After entering the clips through punched holes at the top edge of the graphic, they are simple side loaded in the aluminium profiles. Holes in signage: Maximum distance of upper hole edge to top edge of signage: MINI-TRAK 4 mm, STR/STRS 6 mm, CAT-RAIL and STAR-TRAK 10 mm. Possible signage thickness for MINI-TRAK 3 mm: STAR-TRAK/STR/STRS/CATRAIL 6 mm. Dimensions: 2 mm wire and 13 mm total width. Number per bag: 20. Hook for overhead rails y twisting it 45 degrees this hook is inserted or released directly from underneath the overhead rails STAR-TRAK, MINI-TRAK and CATRAIL. The hook has two possible positions: 0 and 90 degrees to the overhead rail. The hook can also be attached to STR-LINE. Number per bag: 20. OVERHEAD AND FLOOR SIGNAGE STR-CL Frame clip for overhead rails y twisting it 45 degrees this clip is inserted or released directly from underneath the overhead rails STAR-TRAK, MINI-TRAK, CATRAIL, STR and STRS. The frame clip has two possible positions: 0 and 90 degrees to the overhead rail. Number per bag: 20. STR-LPX Extra large loop clip for overhead rails y twisting it 45 degrees this loop is inserted or released directly from underneath the overhead rails STAR-TRAK, MINI-TRAK, CATRAIL, STR and STRS. The loop has two possible positions: 0 and 90 degrees to the overhead rail. Number per bag:

27 CATEGORY & IN-STORE COMMUNICATION CEILING ATTACHMENTS SKY-CLIP Snap shut hook for suspension from STR-LINE This hook can be snap-locked to signage and poster sleeves provided with holes (DA-MG, DA-2H or DA-SG), so that handling is possible by holding the signage at the bottomline. Single use is possible as the SKY-CLIP always will return to a flush position. Click on the small super magnet MGT-16 for ceiling suspension from metal grids. For substrates with a thickness of 0,1 to 2,0 mm. Number per bag: 50. SKYCLIP-MEGA XL snap hook drop & hang Can be hooked onto MINI-TRAK and all other OH-rails with a maximum 25 mm diameter. This hook can also be used to suspend the GRIPPER poster holder. For signs with minimum 3,0 mm large holes. Can also be used with up to 14,0 mm metal eye-lets (outer dimension). ideally the upper hole edge should be 8,0 mm from the upper sign edge. Maximum substrate thickness 3,0 mm. Packing : 50/bag. Colour : Frosted transparent. AL-ROOFPIN Ceiling fixture Ceiling fixture for suspension from ceilings. Number per bag: 100. M2K Mobile button Attachment for light weight signs. Snaps on a T rail in the ceiling. Size: 37x27 mm. Maximum load: 2 kilo. Material: PVC. Colour: White. Number per bag: 100. Number per carton: , 7040, 7060 Mobile spiral Extendable spring for suspending displays from the ceiling max. length: 1200 mm, max. load: 0.5 kg max. length: 1400 mm, max. load: 1 kg max. length: 2500 mm, max. load: 2 kg. Number per bag: 7020: 100, 7040: 25, 7060: 25. Number per carton: 7020: , 7040: 5000, 7060:

28 OVERHEAD & FLOOR SIGNAGE 7065 Double hook For suspension and connection of signs. Available in lengths: 100, 150, 300, 500, 750 and 1000 mm. Wire 2.0 mm diameter. Number per package: 50. MRR Attachment point for lightweight signs Swivelling. With foam tape. Size: 30x30 mm. Maximum load: 0,8 kg. Colour: White. Number per bag: 100. OVERHEAD AND FLOOR SIGNAGE MGT-16 Small super magnet Max 1 kg. Diameter: 16 mm. Can be used with SKY-CLIP. Number per bag: 20. ST-HOOK 25 Small extra tight S shaped hook Dimensions: 3.0 mm wire, total height 25 mm. Number per bag: 50. S-HOOK 28 Small practical S shaped hook Dimensions: 2.0 mm wire, total height 28 mm. Number per bag:

29 CATEGORY & IN-STORE COMMUNICATION AL-WIRE- Wire suspension for over-head rails Standard lengths: 20 and 50 m. 20 or 50 locking mechanisms included. Number per carton: 10. CALEGLIDER Height adjustable cable suspension For quick and user friendly installations of Over Head systems. For releasing and adjusting - just push the top pin. To lock just let the top pin go. To be used with the cable AL-WIRE 1,0 mm. Approved for 20 kg. Number per bag: 50. AL-CHAIN 10K, AL-CHAIN 12K Suspension chain for 10 and 12 kg AL-CHAIN K10. Length is adjustable in 13 mm intervals. AL-CHAIN K12. Length is adjustable in 19 mm intervals. Number per unit: 1 roll of 30 meter. ALL-CHAIN 2K Suspension chain for 2 kg all diameter: 2.0 mm. Number per unit: 50 m per roll. ALL-CHAIN CONNECTOR 2K Connector to join two ALL-CHAINS Packing: 50/bag. 164

30 OVERHEAD & FLOOR SIGNAGE ALL-CHAIN END RING 2K End ring for suspension from ALL-CHAIN Number per bag: 50. CARINE HOOK 27 Openable hook Dimensions: 0.8 x 2.0 mm wire, total height 27 mm. Number per bag: 50. OVERHEAD AND FLOOR SIGNAGE FLOOR TALKERS WT-, WT-U Floortalker High wear protection and anti-slip quality material. The recommended time of application is up to 6 months, and removal without leaving glue residue is guaranteed up to 6 months. Maximum size rectangular (WT): 800x1300 mm. Maximum size contoured (WT-U): 700x1000 mm. Screen-printed graphics. Number per unit: Dependent on dimensions. 165