PRICES GOOD THROUGH MAY 31, 2016

Transcription

1 SPRING PRICES GOOD THROUGH MAY 31, 2016 PAGE MAKITA 6 LXT Lithium-Ion Cordless Metal Cutting Kit PAGE SQWINCHER 68 Liquid Concentrate Electrolyte Drink DUPONT Tyvek Coveralls PAGE 47 CLEVELAND TWIST DRILL HP Spiral Point Universal Taps PAGE 11 WILLIAMS 6 & 12 Point Rugged-Case- System Tool Set PAGE 25 NORTON SAINT-GOBAIN Bear-Tex Hand Pads PAGE 11 PAGE 40 WELLS LAMONT Hi-Vis Cut Resistant Gloves STREAMLIGHT Magnetic Base AA Alkaline Work Lantern PAGE 65 RUST-OLEUM SpraySmart Paint Pouches PAGE 35 GUARDAIR Jet Guard Safety Air Gun PAGE 23 PAGE 53 OCCUNOMIX Miracool PVA Cooling Towel SIOUX 3/4 Inch Impact Wrenches PAGE 18 IN-HOUSE EXPERTS READY TO HELP OR VISIT

2

3 Milwaukee Electric Tool M18 FUEL 2-Tool Combo Kit 18 Volt - 1/2" Hammer Drill / Driver - 1/4" Impact Driver Milwaukee Electric Tool M18 FUEL 1/2" Hammer Drill/Driver Kit 1/2" Capacity The M18 FUEL 2-Tool Combo Kit is the highest performing Hammer Drill & Impact Driver Combo Kit on the market.þ Included is the M18 FUEL Hammer Drill ( ), the Most Powerful 18-volt cordless drill on the market. Delivering up to 1,200 in-lbs of torque and up to 2,000 RPM, it provides faster drilling speed under heavy load to increase productivity. Also included is the M18 FUEL 1/4 Hex Impact Driver ( ), the Most PowerfulImpact Driver in its class.þ At 1800 in-lbs of fastening torque, this impact drives screws faster but also provides greater control over power and speed thanks to its proprietary 4-mode DRIVE CONTROL.þ M18 FUEL features the most advanced cordless technology available; a POWERSTATE Brushless Motor, REDLINK PLUS Electronic Intelligence and REDLITHIUM Battery Technology, resulting in longer motor life, more run time and more power. (1) M18 FUEL 1/2" Hammer Drill/Driver (Bare Tool) ( ) (1) M18 FUEL 1/4" Hex Impact Driver (Bare Tool) ( ) (2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack ( ) (1) M18 & M12 Multi-Voltage Charger ( ) (2) Belt Clip (2) Bit Holder (1) Side Handle (1) Carrying Case HNA# Part# Volts UoM Price TA V Ea $ The M18 FUEL Hammer Drill is the Most Powerful 18-volt cordless drill on the market. The POWERSTATE Brushless Motor delivers up to 1,200 in-lbs of torque and up to 2,000 RPM, providing faster drilling speed under heavy load to increase productivity. At only 7.75 in length, it is the Most Compact drill in its class, reducing fatigue when used for extended periods of time and allowing access to tight work spaces. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The REDLITHIUM XC5.0 Battery Pack delivers more work per charge and more work over the life of the pack than the competitors. All-metal ratcheting locking chuck provides maximum grip, bit retention and durability. Kit Includes: Hammer Drill/Driver, 2-M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack, M18 & M12 Multi-Voltage Charger, Belt Clip, Bit Holder, Side Handle, Carrying Case. Drill Max. HNA# Part# Volts RPM Length UoM Price TQ. In.-Lb TA /0-2, " Ea $ Milwaukee Electric Tool M18 FUEL 1/4" Hex Bit Impact Driver Kit CP-Batteries Milwaukee Electric Tool M18 FUEL 1/2" Drill/Driver Kit 1/2" Capacity - Ratcheting Lock Most Powerful 18-volt cordless drill on the market. The POWERSTATE Brushless Motor delivers up to 1,200 in-lbs of torque and up to 2,000 RPM, providing faster drilling speed under heavy load to increase productivity. At only 7.50 in length, it is the Most Compact drill in its class, reducing fatigue when used for extended periods of time and allowing access to tight work spaces. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The REDLITHIUM XC5.0 Battery Pack delivers more work per charge and more work over the life of the pack than the competitors. The M18 FUEL Drill/Driver s all-metal ratcheting locking chuck provides maximum grip, bit retention and durability. Kit Includes: Drill/Driver, 2-M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack, M18 & M12 Multi-Voltage Charger, Belt Clip, Bit Holder, Side Handle, Carrying Case. HNA# Part# Volts RPM TA /0-2,000 Drill Max. TQ. In.-Lb Length UoM Price " Ea $ The M18 FUEL º Hex Impact Driver is the Most Powerful Tool in its Class. At 1800 in-lbs of fastening torque, this tool drives screws faster but also provides greater control over power and speed thanks to its proprietary 4-mode DRIVE CONTROL. The POWERSTATE Brushless Motor delivers up to 0-3,000 RPM with constant power output to drive screws faster. REDLINK PLUS Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM 2.0 Compact Batteries deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility by delivering RPM in Mode 1, RPM in Mode 2, and RPM in Mode 3. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. HNA# Part# Volts RPM Torque in.lb. UoM Price TA CT Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 1

4 Milwaukee Electric Tool M18 FUEL 3/4" High-Torque Impact Wrench 18 Volt Milwaukee Electric Tool M18 FUEL 3/8" Compact Impact Wrench Kit 18 Volt - Friction Ring Superior performance: Delivers up to 750 ft-lbs of maximum fastening torque, up to 1,200 ft-lbs of nut-busting torque and up to 2X more runtime POWERSTATE Brushless Motor: Outpowers competitors yet runs cooler with no wearable components REDLINK PLUS Intelligence: allows the operator to choose between 2 fastening modes with Milwaukee s proprietary DRIVE CONTROL feature. Mode 1 delivers up to 375 ft-lbs of maximum fastening torque, and Mode 2 up to 750 ft-lbs maximum fastening torque REDLITHIUM XC 4.0 Battery Pack: Provides superior pack construction, electronics and performance to deliver 2X more runtime M18 FUEL 3/4" High-Torque Impact Wrench with Friction Ring ( ) (2) M18 REDLITHIUM XC 5.0AH Extended Capacity Battery Pack ( ) (1) M18 & M12 Multi-Voltage Charger ( ) (1) Carrying Case HNA# Part# Volts UoM Price AF V Ea $ Milwaukee Electric Tool M18 FUEL 1/2" Compact Impact Wrench 18 Volt - Pin Detent Kit POWERSTATE Brushless Motor delivers 220 ft-lbs. of fastening torque REDLINK PLUS Intelligence prevents damage to the tool and battery due to overloading or overheating REDLITHIUM Batteries deliver more work per charge and more work over the life of the battery 4-Mode DRIVE CONTROL provides greater control over output speed and power Utilizes a Pin Detent design for maximum socket retention (1) M18 FUEL 1/2" Compact Impact Wrench w/ Pin Detent (Bare Tool) ( ) (2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack ( ) (1) M18 & M12 Multi-Voltage Charger ( ) (1) Belt Clip (1) Carrying Case HNA# Part# Volts UoM Price TA V Ea $ POWERSTATE Brushless Motor delivers 210 ft-lbs. of fastening torque REDLINK PLUS Intelligence prevents damage to the tool and battery due to overloading or overheating REDLITHIUM Batteries deliver more work per charge and more work over the life of the battery 4-Mode DRIVE CONTROL provides greater control over output speed and power Utilizes a Friction Ring design to ensure quick & easy socket changes (1) M18 FUEL 3/8" Compact Impact Wrench w/ Friction Ring (Bare Tool) ( ) (2) M18 REDLITHIUM XC5.0 Extended Capacity Battery Pack ( ) (1) M18 & M12 Multi-Voltage Charger ( ) (1) Belt Clip (1) Carrying Case HNA# Part# Volts UoM Price TA V Ea $ Milwaukee Electric Tool M18 FUEL Deep Cut Band Saw Kit 18 Volt - Capacity 5'x5' The M18 FUEL Band Saw cuts faster than its corded counterparts, provides the same legendary durability of a Milwaukee corded band saw, and delivers up to 2X more run time than other cordless options. Utilizing a POWERSTATE Brushless motor and Constant Power Technology, the M18 FUEL Deep Cut Band Saw cuts faster than corded band saws. It also delivers the same legendary durability that has made Milwaukee Corded Deep Cut Band Saws. Equipped with Jobsite Armor Technology, the tool is better protected from drops and debris with a proprietary composite material and crush zone barriers to absorb impacts. REDLITHIUM XC4.0 Battery Technology provides up to 2X more run-time through superior pack construction, electronics, and more work per charge over the life of the battery than any competitive lithium-ion battery on the market. The M18 FUEL Deep Cut Band Saw features a tool-free locking adjustable shoe that can adjust from an extended shoe to no shoe in seconds. Other innovative features include a hang hook for easy storage in-between cuts, LED light to illuminate the cutting area, superior cut visibility, and a balanced body design that allows the tool to rest naturally and comfortably in the user s hands. Kit Includes: Deep Cut Band Saw, M18 REDLITHIUM XC 5.0AH Extended Capacity Battery, M18 & M12 Multi-Voltage Charger, Blade, Carrying Case. HNA# Part# Capacity RPM Blade Length UoM Price AM "x5" ⁷ ₈ x¾" 21" Ea $ x.020" 2 PRODUCTS ARE SUBJECT TO AVAILABILITY

5 DEWALT MAX* XR Lithium Ion Brushless Compact Hammerdrill & Impact Driver Combo Kit 20 Volt DEWALT MAX* XR Lithium Ion Brushless High Torque Impact Wrench Kit 20 Volt - 1/2 Inch Drive - Detent Anvil Up to 700 ft-lbs of max torque and 1200 ft-lbs of max breakaway torque Compact design of 8-13/16" in length and weighs only 7.2 lbs Multi-speed control for a variety of applications (0-400/ 1,200/ 1,900 RPM) 1/2" Anvil with detent pin (also available in hog ring) LED light with 20 second delay for increased visibility DEWALT brushless motor delivers up to 57% more run time over brushed XR Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs DCD796 20V MAX* 1/2" hammerdrill compact (7.5" front to back), lightweight (3.6 lb) design fits into tight areas DCF887 20V MAX* 1/4" impact driver compact (5.3" front to back) design fits into tight areas DCD796 features 3-Mode LED with with 20 minute trigger release delay in Spotlight Mode providing increased visibility in dark or confined spaces DCF887 features 3 LED lights imbedded in front of tool with 20 second trigger release delay providing increased visibility in dark or confined spaces HNA# Part# Volts UoM Price TB1733 DCK287D2 20V Ea $ DEWALT MAX* XR Lithium Ion Brushless Hammerdrill & Impact Driver Combo Kit 20 Volt - 1/2 Inch Drive DCD995 20V MAX*1/2" hammerdrill compact size--8.4" frontto-back length & lightweight 4.7 lb--fits tight areas DCF886 20V MAX* 1/4" impact driver provides 1,500 in-lbs of max torque at fast 0-2,800 RPM speed and 0-3,200 impacts per minute DCF886 20V MAX* 1/4" impact driver compact size--5.6" front-toback length & lightweight 3.4 lbs- -fits into tight areas Both tools feature LED lights with 20 second trigger release delay providing increased visibility in dark or confined spaces AH batteries HNA# Part# Volts Drive Size UoM Price TA3387 DCK296P2 20V ¹ ₂" Ea $ DEWALT Max* Lithium Ion Cordless 2 Tool Combo Kit 12 Volt - 3/8 Drill Driver - 1/4 Hex Chuck Impact Driver DCD710 12V MAX* 3/8" drill/ driver features two speed transmission (0-400 / 0-1,500) DCF815 12V MAX* 1/4" hex bit impact driver features 3 LED lights to provide visibility without shadows Includes: DCD710, DCF815, (2) 12V Max Li-Ion batteries, fast charger, bit tip, (2) belt hooks and contractor bag HNA# Part# Volts UoM Price Z27233 DCK211S2 12V Ea $ HNA# Part# Volts Drive Size UoM Price F79204 DCF899P2 20V ¹ ₂" Ea $ DEWALT MAX* Cordless Gyroscopic Screwdriver Kit 8 Volt - Motion Activated Speed - 2 Batteries Motion activation variable speed and reversing control for precise fastening control Motion activated variable speed rpm for fastening into wood, plastic, and light-gauge metal Adjustable two-position handle allows for operation in either inline or pistol-grip Allows control when completing light fastening applications Allows illumination in confined areas without shadowing Battery charge status on tool allows end users to know when to charge packs Allows for quick screwdriver bit change and holds 1" bit tips 8V MAX battery pack allows for longer run-time and charges in one hour HNA# Part# Volts UoM Price AF0869 DCF680N2 8V Ea $ DEWALT MAX* Lithium Ion Cordless 5 Inch Grinder Kit 20 Volt - 2 Batteries 7,000 RPM motor provides high-power for cutting and grinding applications Quick-Change Wheel Release allows for tool free wheel changes without the need for a wrench Tool free guard allows for quick, easy guard adjustments/positioning 2-finger trigger switch (w/ lockoff button) allows for convenient activation and easier gripping 2-position side handle offers greater control, comfort & versatility 5.0 amp hour batteries (2) Power to Grind HNA# Part# Volts RPM Spindle Size UoM Price AM6312 DCG412P2 20V 7,000 ⁵ ₈-11 Ea $ DEWALT MAX* Lithium Ion Compact Reciprocating Saw Kit 20 Volt 0-3,000 spm 1-1/8" stroke length 4-position blade clamp Electric brake Fast Charger / (1) 20V MAX* XR Lithium Ion (5.0 Ah) HNA# Part# Volts UoM Price E92395 DCS387P1 20V Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 3

6 DEWALT Max LED Hand Held Area Light DEWALT 4-1/2 Inch Small Angle Electric Grinders No Lock-on Paddle Switch Low profile gear case allows for access into tighter spaces Quick-Change wheel release provides easier and quicker wheel removal without the need for a wrench One-Touch Guard allows for 360 degree rotation of the guard with a single action No Lock-On Paddle switch provides the user protection from accidental start up Dust ejection system Matching wheel flanges allow the use of common accessories Includes: One-touch guard, 2-position side handle, wrench 3 Bright LED's illuminates dark jobsite work areas 2 Brightness Settings 500 & 250 Lumens provides flexibility for maximum light output or extended runtime 140 Degree Pivoting Head provides versatility for lighting work surfaces Built-in telescoping and 360 rotating hook allows unit to hang from 2" materials and multiple locations Over-molded lens cover provides increased durability and a non-maring surfice for the jobsite Belt hook compatible - add belt hook accessory to provide increased versatility for transportation HNA# Part# Volts Power Source Bulb Type UoM Price AM5030 DCL050 20V 20V DC LED Ea $83.23 DEWALT MAX* Premium XR Lithium Ion Battery Pack 20 Volt Premium XR Lithium Ion pack provides up to 60% more capacity 3-LED Fuel Gauge allows immediate feedback on state of charge No Memory and virtually no self-discharge for maximum productivity and less downtime Lightweight at 1.4 lbs and compatible with entire line of 20V MAX tools 5.0 amp hours HNA# Part# Volts Description UoM Price D59540 DCB205 20V 1 battery Ea $ DEWALT MAX* Lithium-Ion Cordless Band Saw Kit 20 Volt - 2 1/2 Inch Capacity Includes: (1) DCB205: 20V MAX* XR Premium Li-Ion Battery (5.0Ah) 14/18 tpi blade Fast charger Blade tracking wrench Kit bag Features Centered handle position provides superior balance and ergonomics and allows for more accurate cuts and less user fatigue LED Work Light with 20 second delay illuminates dark work surfaces for accurate cutting. Integrated hang hook allows user to hang the saw without damaging the front handle or base Blade tracking adjustment increases blade life by providing better blade tracking Tool less blade changing lever loosens blade tension to allow for blade change Dual bearing blade guide rollers provides increased durability in the blade support system Ergonomic soft grip back handle provides comfort and flexibility HNA# Part# Volts UoM Price AM6313 DCS371P1 20V Ea $ HNA# Part# Amps RPM Spindle Size HP Length UoM Price E97429 DWE402N 11 11,000 5/8" " Ea $ DEWALT Variable Speed Polisher With Soft Start Powerful, 12.0 Amp, all ballbearing construction for long life and performance for the most demanding applications Electronic module maintains specified speed under load delivering better finish results Conveniently located variable speed dial lets user set maximum speed from zero to 600/3500 rpm for different materials and applications Variable speed trigger allows user to control speed from 0 to dialed maximum setting Heat-treated, precision-cut steel gears for smooth operation Wool Ingestion Shields eliminates wool ingestion increasing tool life and reducing service costs Non Mar Rubber Gear Case Cover reduces surface imperfections and improves gripping surface HNA# Part# Size Amp Spindle Length UoM Price Thread X26197 DWP849X 7"/9" 12 ⁵ ₈ " Ea $ DEWALT 2 Gallon Cordless/Corded Wet-Dry Vacuum 18 Volt or 20 Volt - HEPA Rated 2 Gallon Wet-Dry Vacuum 5 Foot Heavy-Duty Crush Resistant Hose (1-1/4" Diameter) Features: Cordless or corded operation powered by either an 18v or 20v MAX battery - or an AC outlet HEPA rated wet/dry filter traps dust with 99.97% efficiency at 0.3 micron Easily accessible, washable/ reusable filter; Tap or water rinse to clean Heavy-duty, crush-resistant, fully-integrated 5' (by 1-1/4" diameter) hose provides durability, flexibility and ease-of-use On-board hose, cord and accessory storage makes the vacuum easy to carry/transport 2-Gallon tank capacity provides enough storage to empty a toilet or clogged pipe HNA# Part# UoM Price AF0925 DCV581H Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

7 DEWALT Impact Driver Cleanable Nutsetters 1/4 Inch Hex Bit The new DeWalt Impact Ready Cleanable Nutsetter is equipped with a clever sliding thumb switch which extends the internal magnet outward to clean off the metal shavings. Product designed for use in Impact Drivers and Wrenches Recessed Corners = Drives on flats which minimzes shavings Industrial strength magnet maximizes fastener retention Shank Size: 1/4 Length: 2.9 HNA# Part# Size UoM Price AF1116 DWA2240IR ¹ ₄", ⁵ ₁₆", ³ ₈" Ea $13.17 DEWALT Right Angle Flex Shaft Magnetic Rapid Load(TM) head for easy bit changes 90 degree head and flexible shaft reaches tight spaces 10X magnetic holding power on average vs. DW2505 using #8 truss-head screw HNA# Part# Size UoM Price TA3389 DWARAFS 12" Ea $34.58 DEWALT 18 Gauge Impact Shear Attachment Makita USA LXT Lithium-Ion Cordless Hammer Driver - Drill Kit 1/2 Inch Capacity INCLUDES: 2 ea. 18V LXT Lithium-Ion Battery (BL1830) 1 30-Minute Rapid Optimum Charger (DC18RA) Tool Case ( ) Tool Belt Clip ( ) Features: Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque Variable 2-speed design (0-400 & 0-1,500 RPM) covers a wide range of drilling, driving and hammer applications Compact design at only 8-1/8" long and weighs only 4 lbs. for reduced operator fatigue Built-in L.E.D. light with afterglow illuminates the work area New redesigned rubberized soft grip provides increased comfort on the job All metal gear construction provides increased durability 30-Minute Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature 3-year warranty on tool and 1-year warranty on battery and charger Capacity - 1/2 No Load Speed: Low RPM & High - 0-1,500 RPM Blows Per Minute: Low - 0-6,000 & High ,500 Max Torque (in. lbs.) HNA# Part# Volts UoM Price TB4905 XPH01 18V Ea $ Makita USA LXT Lithium-Ion Cordless Impact Driver Kit 1/4 Inch Hex Chuck HNA# Part# Size UoM Price TA3390 DWASHRIR ¹ ₄" Ea $57.63 Makita USA LXT Compact Lithium-Ion Cordless 2 Tool Combo Kit 1/2 Inch Drill/Driver - Impact Driver Compact & Powerful with Increased Run Time 1/2" Driver-Drill with 2-speeds (0-600 & 0-1,900 RPM) delivers up to 480 in.lbs. of Max Torque Impact Driver with variable speed (0-2,900 RPM & 0-3,500 IPM) delivers up to 1,460 in.lbs. of Max Torque Impact Driver features a compact design at only 5-3/8" long and weighs only 2.8 lbs. with battery for reduced operator fatigue Built-in L.E.D. light illuminates the work area 18V Compact Lithium-Ion 2.0Ah battery BL1820B reaches full charge in 25 minutes or less Rapid Optimum Charger has a built-in fan to cool the battery which helps produce more lifetime work Makita technology delivers category-leading charge time, so the battery spends more time working and less time sitting on the charger 3-year limited warranty on tool, battery and charger Includes: 18V LXT Cordless 1/2" Driver-Drill (Tool Only) (XFD10Z), (1) 18V LXT Impact Driver (Tool Only) (XDT11Z), (1) 18V Lithium-Ion Rapid Optimum Charger (DC18RC), (2) 18V Compact Lithium-Ion 2.0Ah Battery (BL1820B), (1) TOOL BAG ( ) Includes: 2 ea. 18V LXT Lithium-Ion Battery (BL1830) 1 30-Minute Rapid Optimum Charger (DC18RA) Tool Case ( ) Features: Makita-built 4-pole motor delivers 1,420 in.lbs. of Max Torque Variable speed (0-2,300 RPM & 0-3,200 IPM) for a wide range of fastening applications Convenient one-touch 1/4" hex chuck for quick bit changes New redesigned rubberized soft grip provides increased comfort on the job Built-in L.E.D. light with afterglow illuminates the work area 3-year warranty on tool and 1-year warranty on battery and charger Hex Shank - 1/4 No Load Speed - 0-2,300 RPM Impacts per Minute - 0-3,200 Max Torque (in.lbs.) - 1,420 Overall Length - 5-7/16" HNA# Part# Volts UoM Price F79596 XDT04 18V Ea $ HNA# Part# Volts UoM Price TB4901 CT225R 18V Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 5

8 Makita USA LXT Lithium-Ion Cordless Metal Cutting Kit 18 Volt - Brushless Metal Cutting Saw & Grinder Circular saw XSC02Z cuts strut, channel, angle iron, and threaded rod faster, cooler and virtually burr- free. Angle grinderxag06z has a strong brushless motor providing corded performance in a cordless tool Kit enables MRO workers to get work done quickly without the need for an AC outlet or extension cord Cuts 2 metal conduit in a single pass Includes brushless XSC02Z metal cutting circular saw, brushless XAG06Z 41/2 paddle switch grinder, (2) Batteries and rapid charger HNA# Part# Volts UoM Price TB4906 XT266M 18V Ea $ Makita USA LXT Lithium-Ion Cordless 12 LED Flashlight 18 Volt Lumens Extra Bright 12 L.E.D. Flashlight Provides 240 Lumens Flashlight head folds up and down with 7 positive stops and rotates left to right for multiple lighting angles 2-mode on/off switch delivers either full brightness (240 lumens) with 12 L.E.D. or half brightness (120 lumens) with 6 L.E.D. Up to 34 hours of continuous illumination from a 4.0Ah 18V LXT battery (sold separately) Up to 22 hours of continuous illumination from a 3.0Ah 18V LXT battery (sold separately) Weighs only 2.1 lbs. with battery (battery not included) for reduced operator fatigue 1-year warranty on flashlight Battery and charger sold separately HNA# Part# Description Run Time UoM Price F79862 DML801 Flashlight Only 22 hours Ea $68.76 Makita USA LXT Lithium-Ion Cordless / Corded 20 LED Flood Light 18 Volt Lumens L.E.D. Lights Deliver Bright and Even Lighting For Large Workspaces 2-mode operation: delivers 750 lumens on High mode or 450 lumens on Low mode Up to 8.5 hours of continuous illumination with a 5.0Ah 18V LXT battery on High mode (battery and charger not included) Up to 17 hours of continuous illumination with a 5.0Ah 18V LXT battery on Low mode (battery and charger not included) Extreme Protection Technology (XPT ) is engineered for improved dust and water resistance for operation in harsh conditions (only with DC power) L.E.D. lights effectively illuminate work area without the high heat of halogens Adjusting knobs enable the user to direct the flood light to desired angle User can choose between battery or corded operation; compatible with 18V LXT batteries (battery not included) Back up power is provided by an 18V LXT battery and keeps the flood light on if AC power is lost (charged battery must be installed) Light will flash to alert user when battery charge is low (battery not included) Compact design at only 8-3/8" long Weighs only 5.7 lbs. with battery (battery not included) Flood light can be mounted on optional tripod light stand individually or with two flood lights (tripod light stand not included) 3-year warranty on flood light HNA# Part# Volts Description Run Time UoM Price TB4902 DML Flood light only 10.5 hours Ea $ Makita USA Portable Tripod Light Stand For Makita DML805 Flood Lights Makita USA LXT Lithium-Ion Cordless LED Flashlight 18 Volt Lumens Up to 13 hours of continuous illumination on a single charge High-luminance single L.E.D. flashlight provides 200 lumens 12 position pivoting flashlight head with positive stops from 60º - 110º Aluminum flashlight head design for increased durability Up to 13 hours of continuous illumination with a 3.0Ah LXT battery (battery and charger not included) L.E.D. and provides a sharp, round spotlight Compact and ergonomic design at only 10-3/4" long Weighs only 2.1 lbs. with battery (battery and charger not included) HNA# Part# Description UoM Price F79863 DML802 Flashlight only Ea $67.23 Durable, light weight Metal construction for long life and easy portability. Tripod telescopes to 58". Collapisble design for optimal portability. Stand allows for easy 360 degrees rotation. Only 26-1/4" long when collapsed. For use with LM HNA# Part# UoM Price TB4903 GM Ea $70.29 Makita USA SJS Paddle Switch Angle Grinder 4-1/2 Inch Amps - 11,000 RPM SJS Mechanical Clutch System Helps Prevent Motor and Gear Damage Powerful 10.0 AMP motor delivers more output and 10,500 RPM for the most demanding applications Large flush-mount paddle switch with integrated lock-off tab for more comfortable operation Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life Spiral bevel gears for smoother rotations and a more efficient transfer of energy "Tool-less" wheel guard for more convenient adjustments Includes:Side Handle ( ), (1) 4-1/2" Tool-less Wheel Guard ( ), (1) Inner Flange ( ), (1) Lock Nut ( ), (1) Lock Nut Wrench ( ) Spindle Thread: 5/8" - 11 UNC Overall Length: 12-1/8" HNA# Part# Size Amps RPM UoM Price F P 4¹ ₂" ,500 Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

9 Makita USA Electric Angle Grinder 4-1/2-7.5 Amps - 10,000 RPM - AC/DC Small circumference barrel grip (only 2.5") for added comfort Labyrinth construction seals and protects the motor and bearings from dust and debris by creating a complex set of channels 7.5 AMP motor design for high output power in a more compact tool (only 3.5 lbs.) Large paddle switch for easy operation All ball bearing design and metal gear housing for durability AC/DC switch for use with alternative power sources Includes: 4-1/2 Grinding Wheel, Wheel Guard, Lock Nut, Lock Nut Wrench, Side Handle, Inner Flange No Load RPM: 10,000 Spindle Thread (11 UNC): 5/8" Length: 10-5/8" HNA# Part# Size Amps RPM UoM Price Q PB 4¹ ₂" Ea $ Makita USA 14" Portable Cut Off Saw W/Free 4-1/2" Paddle Switch Grinder Cuts 4-1/2" round stock at 45º and 90º Lock-off button to prevent accidental starting Spark diversion guard for operators safety Guide plate adjusts 45 right and left - 3 locations for various sizes of materials Quick release vise for secure stock retention and fast repeated cut-offs Socket wrench stores on base for convenience Adjustable depth stop for precise, repeatable cutting depth Shaft lock for easy wheel changes INCLUDES: 1 Ea. Abrasive wheel ( ) Socket wrench ( ) 2 Ea. Switch button ( ) Specifications: Arbor: 1" Max. cutting Capacity: /2"; /2" No Load RPM: 3,800 AMPS: 15.0 Length: 19-3/4" HNA# Part# UoM Price TB NBX2 Ea $ M. K. Morse Co. Metal Cutting Circular Saw Machines 14 Inch Metal Devil Makita USA Electric Metal Cutting Saw 12 Inch - 15 Amp Motor RPM For fast cutting in light pipe, angle iron, tubing, conduit and channels D-shape handle for easy gripping Long lasting carbide tipped blade for cost efficient and clean cutting; virtually burr free Lock-off button to prevent accidental starting Guide plate adjusts 0-45 for bevel cutting Quick release vise for secure stock retention and fast repeated cut-offs Socket wrench stores on base for convenience Shaft lock for easy wheel changes Includes: 60T carbide tipped blade, socket wrench, switch button, safety goggles Specifications: Blade diameter: 12 Arbor: 1 Max. cutting capacities: /2, /2 No load speed: 1,300 Overall Length: 20 1/4 HNA# Part# Size Amps RPM UoM Price TB4904 LC " Ea $ M. K. Morse Co. Metal Cutting Circular Saw Machines 9 Inch Metal Devil Offer a safer, cleaner way to cut metal. The special motor maintains torque at optimum RPM's for cutting through metal smoothly and efficiently. INCLUDES 0-45 Mitering Vice, Overload Switch, Retracting Blade Guard, Quick Release Metal Chip Collection Chamber, 6mm & 8mm Blade Wrench, Safety Goggles, Ear Plugs, Metal Devil NXT Steel Cutting Blade. CUTTING - Round 4-1/8", Square 3 1/2" x 3 1/2", Rectangle 3 1/8" x 4 3/8 - Round 5-1/8", Square 4 3/4" x 4 3/4", Rectangle 3 3/4" x 7 1/ 4" 1300 RPM, 120 V, 60Hz, 15 Amp, 1" Arbor, 53 lbs Offer a safer, cleaner way to cut metal. The special motor maintains torque at optimum RPM's for cutting through metal smoothly and efficiently. INCLUDES 0-45 Mitering Vice, Overload Switch, Retracting Blade Guard, Quick Release Metal Chip Collection Chamber, 6mm & 8mm Blade Wrench, Safety Goggles, Ear Plugs, Metal Devil NXT Steel Cutting Blade. CUTTING - Round 4-1/8", Square 3 1/2" x 3 1/2", Rectangle 3 1/8" x 4 3/8 - Round 5-1/8", Square 4 3/4" x 4 3/4", Rectangle 3 3/4" x 7 1/ 4" 1300 RPM, 120 V, 60Hz, 15 Amp, 1" Arbor, 53 lbs HNA# Part# UoM Price TB Ea $ HNA# Part# Size UoM Price TB " Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 7

10 Lenox Bi-Metal Hole Saw Kit General Purpose - 17 Piece Lenox Metal Reciprocating Blades Power Arc Delivers up to 2X longer life vs. traditional straight LENOX recip blades Optimizes the blade's angle of attack for faster cutting in a variety of materials T2 Technology and precision applied titanium coating help dissipate heat making blades last longer Titanium coating makes teeth more wear-resistant so they stay sharp for quicker cuts HNA# Part# Size TPI Use Pkg. Qty. UoM Price AT GR 6"x³ ₄"x. 035" 14 Metal 5 Blades Pk $17.90 AT B810GR 8"x³ ₄"x. Metal/ 10 Wood/ 050" Pipe 25 Blades Pk $ Set Includes: 5/8, 3/4", 7/8",1, 1-1/8", 1-1/4, 1-3/8", 1-1/2, 1-3/4", 2", 2-1/2", 3 1L arbor Snap-Back 2L arbors Three 4321 Pilot drills Plastic case M. K. Morse Co. Reciprocating Saw Blades Kit Heavy Duty - 12 Piece HNA# Part# Number in Set UoM Price TB G 17 Piece Ea $ M. K. Morse Co. Master Cobalt Bi -Metal Hole Saw Kit Maintenance - 13 Piece Assortment Includes: (4) (6"-18TPI) Power Metal Cutting Blades (2) (9"-14TPI) Power Metal Cutting Blades (2) (6"-10TPI) Havoc Demolition Blades (2) (9"-10TPI) Havoc Demolition Blades (2) (6"-14TPI) Fire & Rescue Blades STORAGE CASE A handy general purpose kit for plumbing and electrical jobs on pipe and conduit through 2". These handy hole saw kits conveniently organize and store the sizes pros need within easy reach. Cutting depth is 1-1/2" (38mm). Arbor Required. Kit Includes: (1 each): 3/4, 7/8, 1-1/8, 1-3/8, 1-1/2, 1-3/4, 2, 2-1/4, 2-1/2 Arbors (1 each): M24K, M44, M45P Extension (1): 12 HNA# Part# UoM Price TB Ea $93.20 HNA# Part# UoM Price TB Ea $25.01 Milwaukee Electric Tool Metal Cutting Sawzall Reciprocating Saw Blades Reciprocating Saw Lenox Extreme Metal Reciprocating Blades T2 Technology tooth design ensures longer blade life in the most demanding metal cutting applications. A wider, thicker body than conventional blades delivers whip-free cuts that stay straight and smooth. Titanium coating makes teeth more wear resistant so they stay sharp for quicker cuts HNA# Part# Size TPI Use Pkg. Qty. UoM Price E GR 9"x1"x.035" 14 Metal 5 Blades Pk $31.65 AT B9114GR 9"x1"x.035" 14 Metal 25 Blades Pk $ Optimized for best cutting performance in pipe, conduit, strut, threaded rod, angle iron, duct and other metal building materials. Long Life - Double relief angle reduces tooth stress Fast Cutting - Precision forming process creates sharper teeth Blades are priced each but must be purchased in package quantities Matrix II bi-metal teeth for greater durability HNA# Part# LxWxT TPI Use UoM Price "x³ ₄"x0.035" 10 Metal ¹ ₄" - ³ ₈" Ea $ "x³ ₄"x0.035" 14 Metal ³ ₁₆" - ¹ ₄" Ea $ "x³ ₄"x0.035" 18 Metal 1/8" thru 3/16" Pk $ "x³ ₄"x0.035" 24 Metal up to ¹ ₈" Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

11 Bahco Easy-Cut Bi-Metal Portable Band Saw Blades For Hand Held Machines Lenox Band Saw Blades Portable Master-Band Advantage The Easy-Cut Bimetal Portable Bandsaw Blades are perfect for fast cutting, and the unique, patented Easy-Cut blade configuration eliminates the need to specify tooth pitch or type. It also reduces the number of different blades needed to cut various materials. Patented tooth design provides a very versatile blade so you no longer need to worry about TPI Easy feeding, good control and precision cutting Ideal for cutting different sizes in a wide range of materials including: bronze, copper, mild steel, aluminum, brass, chrome and others Cuts: conduit, galvanized and PVC pipe, rebar, angle iron, wood, virtually any material, all without changing the blade HNA# Part# WxT Length Pkg. Qty. UoM Price TB4945 PBEZ835-1P ¹ ₂"x ⁷ ₈" 1 Ea $6.69 TB4947 PBEZ835-3P ¹ ₂"x ⁷ ₈" 3 Pk $18.39 TB4946 PBEZ P ¹ ₂"x ⁷ ₈" 100 Ca $ TB4942 PBEZ1140-1P ¹ ₂"x ⁷ ₈" 1 Ea $6.69 TB4944 PBEZ1140-3P ¹ ₂"x ⁷ ₈" 3 Pk $18.39 TB4943 PBEZ P ¹ ₂"x ⁷ ₈" 100 Ca $ M. K. Morse Co. 8/11 High Performance Band Saw Blades High performance bi-metal portable band saw blades ideal for cutting Heavy Wall materials 1/4"+. Exceptional performance and the most cuts per blade in the market. Enhanced beam strength.023 thick material increases blade strength and reduces deflection and twist Shatter resistant Bi-metal blades bend and resist breaking and extend blade life Longer lasting Lenox Tuf Tooth design reinforces tooth for longer blade life Length: 44 7/8 in. Width: 1/2 in. Quantity per Pack: 3 HNA# Part# TPI Cuts Material UoM Price EW /14 ¹ ₄ and Larger Pk $ EW14 14 ³ ₁₆ - ³ ₈ Pk $ EW /18 ¹ ₈ - ⁵ ₁₆ Pk $ EW18 18 ³ ₃₂ - ¹ ₄ Pk $29.01 Lenox MASTER-BAND Portable Band Saw Blades Bi-Metal Specially treated bands of.023 and.025 thicknesses offer increased blade strength, reducing deflection and twisting of blades during severe cutting conditions. Bi-metal blades bend and resist breaking and extend blade life. LENOX TUFF TOOTH design reinforces tooth for longer blade life. HNA# Part# LxWxT TPI Pkg. Qty. UoM Price H EW24 44"⁷ ₈x¹ ₂"x.023" 24 3 Blades Pk $29.01 HNA# Part# LxWxT TPI Pkg. Qty. UoM Price TB ³ ₁₆"x¹ ₂"x.020" 8/11 3 Blades Pk $15.92 TB ⁷ ₈"x¹ ₂"x.020" 8/11 3 Blades Pk $15.92 TB ³ ₈"x¹ ₂"x.020" 8/11 3 Blades Pk $15.92 F ⁷ ₈"x¹ ₂"x.020" 8/11 3 Blades Pk $13.85 Milwaukee Electric Tool Standard Deep Cut Portable Band Saw Blades Heavy-Duty Super-Tough M. K. Morse Co. 12/16 High Performance Band Saw Blades High performance bi-metal portable band saw blades ideal for cutting Thin Wall materials 3/ 16" or less. Exceptional performance and the most cuts per blade in the market. HNA# Part# LxWxT TPI Pkg. Qty. UoM Price TB ³ ₁₆"x¹ ₂"x.020" 12/16 3 Blades Pk $15.92 TB ⁷ ₈"x¹ ₂"x.020" 12/16 3 Blades Pk $15.92 TB ³ ₈"x¹ ₂"x.020" 12/16 3 Blades Pk $15.92 TB ⁷ ₈"x¹ ₂"x.020" 12/16 3 Blades Pk $13.85 Bi-Metal blades outlast conventional blades up to 3 times, requiring fewer blade changes. Extremely hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting, longer blade life. Matrix ll high speed steel teeth with 8% cobalt. For the fastest cutting, longest blade life available Recommended Use: High speed cutting of aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel. Tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed. HNA# Part# Pkg. Qty. Diameter or Wall Thickness TPI Size UoM Price ⁵ ₃₂" - ³ ₁₆" 18 44⁷ ₈"x¹ ₂ "x.020" ⁵ ₃₂" - ³ ₁₆" 18 44⁷ ₈"x¹ ₂ "x.020" ⁵ ₃₂" - ³ ₁₆" 18 44⁷ ₈"x¹ ₂ "x.020" Ea $7.59 Ea $20.55 Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 9

12 M. K. Morse Co. Metal Devil Circular Saw Blades DEWALT High Performance Metal Cutting Abrasive Wheels Type " Thin.045" wheel design for fast burr free cutting Proprietary aluminum oxide grain combination for aggressive cutting action Proprietary material mix ensures durable long life wheels 2 full sheets of fiberglass for durability and safety Cut through steel and other tough metals faster than ever. Unique combinations of metallurgy and blade configurations are tailored for peak performance in specific applications. HNA# Part# Size Teeth Use For Arbor Size UoM Price TB " 40 Steel 20mm Ea $51.61 TB " 68 Thin Steel 20mm Ea $66.92 TB ¹ ₄" 40 Steel ⁵ ₈" KO Ea $48.74 TB ¹ ₄" 48 Steel ⁵ ₈" KO Ea $48.74 TB " 42 Steel ⁵ ₈" Ea $56.40 TB " 48 Steel ⁵ ₈" Ea $57.34 TB " 50 Stainless Steel ⁵ ₈" Ea $81.75 TB " 48 Steel 1" Ea $64.06 TB " 56 Stainless Steel 1" Ea $86.04 TB " 66 Steel 1" Ea $ B " 90 Stainless Steel 1" Ea $ Milwaukee Electric Tool Circular Saw Blades 8 Inch - Dry Cut Metal HNA# Part# DxTxH RPM UoM Price G49654 DW8426 6"x.045"x⁷ ₈" 10,100 Ea $2.30 Norton Saint-Gobain Type 27 Reinforced Cut-Off Wheels Norzon Plus Rightcut Made with advanced ceramic grain technology. The premium combination of Norton SG (seeded gel) ceramic alumina and NorZon zirconia alumina abrasives in the fastest cutting bond system. Extensive internal and field tests prove that these wheels perform up to 100% better than competitive highperformance wheels and up to 10 times better than aluminum oxide wheels. Improved performance was found across all grinding jobs - from gray iron to exotic alloys and stainless steel. HNA# Part# DxTxH RPM Type UoM Price "x¹ ₄"x5/8-11 8,600 Grinding Ea $12.97 Norton Saint-Gobain Straight Cut Off Abrasive Wheels Type 01 BlueFire This blade is designed to cut a variety of ferrous materials including pipe, angle iron, steel studs and conduit. The blade has vibration damping which reduces heat, sparks and noise for cleaner smoother, burr free cuts. þlong LIfe: Micro ground carbide teeth stay sharper Accurate Cuts: Fully hardened, tensioned steel plate prevents warping Fast Cutting: Extra thin kerf for faster, cleaner cuts HNA# Part# Teeth Arbor RPM Material UoM Price J ⁵ ₈" 5000 Ferrous Ea $65.67 BlueFire Cut-Off Wheels The Norton stationary saw reinforced cut-off wheel line consists of Type 01 straight 10" - 24" wheels, designed to fit on fixed-base stationary saws that are free-standing or mounted on a workbench. Applications: Primary applications are cutting of all metal parts (flat stock, bars, studs, pipes, tubes, angle iron, cable), wire rope and hydraulic hose used in fabrication, construction and plant maintenance. Common Specifications: Abrasive Grain: Aluminum Oxide Steel/Stainless Small Diameter HNA# Part# DxTxH RPM Blade Type UoM Price "x¹ ₁₆"x³ ₈" 25,465 Free Cut Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

13 Norton Saint-Gobain Cut Off Abrasive Wheels Straight Reinforced or Flat Type 1 Norton Saint-Gobain Abrasive Paper Discs Hook & Loop - A275 Premium P-graded, heattreated aluminum oxide abrasive Unique fiber-reinforced, B-wt latex-saturated backing Water-based stearate, non-pigmented, No-Fil coating Superior life, fast cut rate, consistent finish 50-60% improvement in tear strength Flexible; can be used wet Provides maximum load resistance and extended life; no color transfer to work. Steel/ Stainless Small Diameter HNA# Part# DxTxH RPM Blade Type UoM Price "x.035"x¹ ₄" 25,465 Free Cut Ea $ "x.035"x³ ₈" 25,465 Free Cut Ea $ "x¹ ₁₆"x³ ₈" 25,465 Free Cut Ea $ "x¹ ₈"x³ ₈" 25,465 Free Cut Ea $ "x.035"x³ ₈" 19,100 Free Cut Ea $ "x¹ ₁₆"x³ ₈" 19,100 Free Cut Ea $ "x¹ ₁₆"x¹ ₄" 25,465 Long Life Ea $ "x¹ ₁₆"x³ ₈" 25,465 Long Life Ea $ ¹ ₂"x.045x⁷ ₈" 13,580 Right Angle Ea $1.99 E "x.045"x⁷ ₈" 10,185 Right Angle Ea $2.43 HNA# Part# Grits / Grades Diameter UoM Price " Ea $ " Ea $ " Ea $ " Ea $ " Ea $ " Ea $ " Ea $ " Ea $ " Ea $ " Ea $ " Ea $ " Ea $ " Ea $0.66 Norton Saint-Gobain Hand Pads Bear-Tex Conforms to work surface. Gentle action. Easily removes flashing or burrs. Non-loading. Constant supply of new cutting edges. Won t rust. Nonwoven nylon web impregnated with abrasive grain and resin. HNA# Part# WxL Grits / Grades Color Description Material UoM Price "x9" VF Maroon Best-General Aluminum Purpose Oxide Ea $ "x9" UF Gray Good-Clean & Silicon Finish Carbide Ea $ "x9" Med Dark Tan Good-Heavy- Duty Aluminum Oxide Ea $ "x9" MF Gray Good-Final Silicon Shine Carbide Ea $1.11 N "x9" VF Maroon Good-Long Aluminum Life Oxide Ea $3.06 Cleveland Twist Drill HP Spiral Point Universal Taps Plug - Steam Oxide PRO-961SP Shank: Straight w/ Square Tap Blank Construction:DIN/ANSI HNA# Part# Thread Thread Form Length Flutes UoM Price TB4288 C UNC " 3 Ea $13.13 TB4289 C UNC " 3 Ea $10.94 TB4290 C UNC " 3 Ea $10.94 TB4291 C UNC " 3 Ea $10.94 TB4292 C UNF " 3 Ea $10.94 TB4293 C96114 ¹ ₄-20 UNC " 3 Ea $12.16 TB4294 C96115 ¹ ₄-28 UNF " 3 Ea $12.16 TB4295 C96116 ⁵ ₁₆-18 UNC " 3 Ea $13.62 TB4296 C96117 ⁵ ₁₆-24 UNF " 3 Ea $13.62 TB4297 C96118 ³ ₈-16 UNC " 3 Ea $15.32 TB4298 C96119 ³ ₈-24 UNF " 3 Ea $15.32 TB4299 C96122 ¹ ₂-13 UNC " 3 Ea $23.10 TB4300 C96123 ¹ ₂-20 UNF " 3 Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 11

14 Cleveland Twist Drill HP Spiral Point Taps Plug - For Stainless Steel PER-960SP Shank: Straight w/ Square Tap Blank Construction:DIN/ANSI, Hard Lube HNA# Part# Thread Thread Form Length Flutes UoM Price TB4275 C UNC " 3 Ea $15.66 TB4276 C UNC " 3 Ea $12.95 TB4277 C UNC " 3 Ea $12.95 TB4278 C UNC " 3 Ea $13.08 TB4279 C UNF " 3 Ea $13.08 TB4280 C96014 ¹ ₄-20 UNC " 3 Ea $14.54 TB4281 C96015 ¹ ₄-28 UNF " 3 Ea $14.54 TB4282 C96016 ⁵ ₁₆-18 UNC " 3 Ea $16.18 TB4283 C96017 ⁵ ₁₆-24 UNF " 3 Ea $16.18 TB4284 C96018 ³ ₈-16 UNC " 3 Ea $18.38 TB4285 C96019 ³ ₈-24 UNF " 3 Ea $18.38 TB4286 C96022 ¹ ₂-13 UNC " 3 Ea $27.60 TB4287 C96023 ¹ ₂-20 UNF " 3 Ea $27.60 HP Spiral Flute Taps Semi-Bottoming - For Stainless Steel PER-980SF Shank: Straight w/ Square, Tap Blank Construction:DIN/ANSI, Hard Lube Cleveland Twist Drill HP Spiral Point Universal Taps Semi-Bottoming - Steam Oxide PRO-981SF Shank: Straight w/ Square Tap Blank Construction:DIN/ ANSI Cleveland Twist Drill HNA# Part# Thread Thread Form Length Flutes UoM Price TB4314 C UNC " 3 Ea $19.69 TB4315 C UNC " 3 Ea $15.97 TB4316 C UNC " 3 Ea $15.97 TB4317 C UNC " 3 Ea $15.97 TB4318 C UNF " 3 Ea $15.97 TB4319 C98114 ¹ ₄-20 UNC " 3 Ea $17.34 TB4320 C98115 ¹ ₄-28 UNF " 3 Ea $17.34 TB4321 C98116 ⁵ ₁₆-18 UNC " 3 Ea $21.31 TB4322 C98117 ⁵ ₁₆-24 UNF " 3 Ea $21.31 TB4323 C98118 ³ ₈-16 UNC " 3 Ea $24.80 TB4324 C98119 ³ ₈-24 UNF " 3 Ea $24.80 TB4325 C98122 ¹ ₂-13 UNC " 3 Ea $43.76 TB4326 C98123 ¹ ₂-20 UNF " 3 Ea $43.76 Cleveland Twist Drill 4 - Flute Corner Radius Carbide End Mills Single End - RHS - RHC - TiAIN CEM-V-4R Variable Index construction, Shank: Straight without flats. Center Cutting HNA# Part# Thread Thread Form Length Flutes UoM Price TB4301 C UNC " 3 Ea $23.37 TB4302 C UNC " 3 Ea $19.06 TB4303 C UNC " 3 Ea $19.06 TB4304 C UNC " 3 Ea $19.06 TB4305 C UNF " 3 Ea $19.06 TB4306 C98014 ¹ ₄-20 UNC " 3 Ea $21.59 TB4307 C98015 ¹ ₄-28 UNF " 3 Ea $21.59 TB4308 C98016 ⁵ ₁₆-18 UNC " 3 Ea $25.82 TB4309 C98017 ⁵ ₁₆-24 UNF " 3 Ea $25.77 TB4310 C98018 ³ ₈-16 UNC " 3 Ea $30.00 TB4311 C98019 ³ ₈-24 UNF " 3 Ea $30.00 TB4312 C98022 ¹ ₂-13 UNC " 3 Ea $52.07 TB4313 C98023 ¹ ₂-20 UNF " 3 Ea $52.07 HNA# Part# Size Cutting Dia. Shank Dia. Cut Lgth Lgth Corner Radius UoM Price TB4228 C80001 ¹ ₈" " " 0.25" 1.5" 0.000" Ea $13.05 TB4229 C80002 ¹ ₈" " " 0.25" 1.5" 0.010" Ea $13.61 TB4230 C80005 ¹ ₈" " " 0.5" 1.5" 0.000" Ea $13.47 TB4231 C80006 ¹ ₈" " " 0.5" 1.5" 0.010" Ea $14.30 TB4232 C80007 ³ ₁₆" " " 0.375" 2" 0.000" Ea $13.57 TB4233 C80008 ³ ₁₆" " " 0.375" 2" 0.010" Ea $14.06 TB4234 C80011 ³ ₁₆" " " 0.75" 2.5" 0.020" Ea $18.05 TB4235 C80012 ³ ₁₆" " " 0.75" 2.5" 0.010" Ea $19.20 TB4236 C80013 ¹ ₄" " " 0.5" 2" 0.000" Ea $16.60 TB4237 C80014 ¹ ₄" " " 0.5" 2" 0.020" Ea $17.11 TB4238 C80015 ¹ ₄" " " 0.75" 2.5" 0.000" Ea $20.33 TB4239 C80016 ¹ ₄" " " 0.75" 2.5" 0.020" Ea $20.94 TB4240 C80021 ⁵ ₁₆" " " 0.5" 2" 0.000" Ea $25.09 TB4241 C80022 ⁵ ₁₆" " " 0.5" 2" 0.020" Ea $25.66 TB4242 C80023 ⁵ ₁₆" " " " 2.5" 0.000" Ea $27.06 TB4243 C80024 ⁵ ₁₆" " " " 2.5" 0.020" Ea $27.68 TB4244 C80027 ³ ₈" " " 0.625" 2" 0.000" Ea $27.60 TB4245 C80028 ³ ₈" " " 0.625" 2" 0.020" Ea $28.21 TB4246 C80029 ³ ₈" " " 0.875" 2.5" 0.000" Ea $29.73 TB4247 C80030 ³ ₈" " " 0.875" 2.5" 0.020" Ea $30.47 TB4248 C80040 ¹ ₂" " " 0.625" 2.5" 0.000" Ea $43.85 TB4249 C80042 ¹ ₂" " " 0.625" 2.5" 0.030" Ea $44.80 TB4250 C80043 ¹ ₂" " " 1" 3" 0.000" Ea $46.36 TB4251 C80044 ¹ ₂" " " 1" 3" 0.030" Ea $47.04 TB4252 C80048 ¹ ₂" " " 1.25" 3" 0.000" Ea $42.86 TB4253 C80050 ¹ ₂" " " 1.25" 3" 0.030" Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

15 Cleveland Twist Drill 5 - Flute Corner Radius High Performance Carbide End Mills Single End - RHS - RHC - TiAIN CEM-V2-5R For Ferrous materials Features and Benefits: Variable Index construction Shank: Straight without flats. Center Cutting HNA# Part# Size Cutting Diameter Shank Diameter Cut Length Length Corner Radius UoM Price TB4254 C80525 ³ ₁₆" " " 0.375" 2" 0.000" Ea $11.48 TB4255 C80526 ³ ₁₆" " " 0.375" 2" 0.010" Ea $14.34 TB4256 C80529 ³ ₁₆" " " 0.75" 2.5" 0.000" Ea $16.95 TB4257 C80530 ³ ₁₆" " " 0.75" 2.5" 0.010" Ea $18.45 TB4258 C80531 ¹ ₄" " " 0.5" 2" 0.000" Ea $15.73 TB4259 C80532 ¹ ₄" " " 0.5" 2" 0.020" Ea $18.84 TB4260 C80533 ¹ ₄" " " 0.75" 2.5" 0.000" Ea $21.38 TB4261 C80534 ¹ ₄" " " 0.75" 2.5" 0.020" Ea $25.87 TB4262 C80538 ⁵ ₁₆" " " 0.5" 2" 0.000" Ea $23.87 TB4263 C80539 ⁵ ₁₆" " " 0.5" 2" 0.020" Ea $28.21 TB4264 C80540 ⁵ ₁₆" " " " 2.5" 0.000" Ea $24.01 TB4265 C80541 ⁵ ₁₆" " " " 2.5" 0.020" Ea $29.45 TB4266 C80545 ³ ₈" " " 0.625" 2" 0.000" Ea $26.31 TB4267 C80546 ³ ₈" " " 0.625" 2" 0.020" Ea $30.35 TB4268 C80547 ³ ₈" " " 0.875" 2.5" 0.000" Ea $27.67 TB4269 C80548 ³ ₈" " " 0.875" 2.5" 0.020" Ea $32.18 TB4270 C80558 ¹ ₂" " " 0.625" 2.5" 0.000" Ea $35.87 TB4271 C80559 ¹ ₂" " " 0.625" 2.5" 0.030" Ea $46.84 TB4272 C80560 ¹ ₂" " " 1" 3" 0.000" Ea $39.13 TB4273 C80561 ¹ ₂" " " 1" 3" 0.030" Ea $47.65 TB4274 C80565 ¹ ₂" " " 1.25" 3" 0.000" Ea $44.49 Sandvik 90 Degree Square Shoulder Milling Cutter Size 7 Insert - Coromant EH - Fractional CoroMill 390 Coolant through Depth of cut:.228 HNA# Part# Inserts Cutter Diameter Sandvik 90 Degree Square Shoulder Milling Cutter Size 7 Insert - Coromant EH - Metric CoroMill 390 Coolant through Depth of cut: 5.8 Pounds Connection Diameter Gage Length Pitch UoM Price TB4346 RA EH10-07L L Ea $ TB4350 RA EH12-07L L Ea $ TB4349 RA EH12-07M M Ea $ TB4354 RA EH16-07H H Ea $ TB4355 RA EH16-07M M Ea $ TB4359 RA EH20-07H H Ea $ TB4360 RA EH20-07M M Ea $ TB4363 RA EH25-07H H Ea $ TB4364 RA EH25-07M M Ea $ HNA# Part# Inserts Cutter Diameter Kg Connection Diameter Gage Length Pitch UoM TB4368 R EH10-07L L Ea $ TB4371 R EH10-07L L Ea $ TB4374 R EH12-07L L Ea $ TB4378 R EH12-07L L Ea $ TB4379 R EH12-07M M Ea $ TB4382 R EH12-07L L Ea $ TB4383 R EH12-07M M Ea $ TB4386 R EH12-07M M Ea $ TB4388 R EH16-07M M Ea $ TB4392 R EH16-07H H Ea $ TB4393 R EH16-07M M Ea $ TB4394 R EH16-07M M Ea $ TB4397 R EH20-07H H Ea $ TB4398 R EH20-07M M Ea $ TB4401 R EH25-07H H Ea $ TB4402 R EH25-07M M Ea $ Price 3 WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 13

16 Sandvik 90 Degree Square Shoulder Milling Cutter Size 7 Insert - Cylindrical Shank - Fractional CoroMill 390 Coolant through Depth of cut:.228 HNA# Part# Inserts Cutter Diameter Kg Shank Diameter Gage Length Pitch UoM Price TB4347 RA O08L-07L L Ea $ TB4348 RA O10-07L L Ea $ TB4351 RA O10L-07L L Ea $ TB4352 RA O13-07L L Ea $ TB4353 RA O13-07M M Ea $ TB4356 RA O14L-07M M Ea $ TB4357 RA O16-07H H Ea $ TB4358 RA O16-07M M Ea $ TB4361 RA O19-07H H Ea $ TB4362 RA O19-07M M Ea $ TB4365 RA O25-07H H Ea $ TB4366 RA O25-07M M Ea $ Sandvik 90 Degree Square Shoulder Milling Cutter Size 7 Insert - Cylindrical Shank - Metric CoroMill 390 Shoulder milling tools Coolant through Depth of cut: 5.8 HNA# Part# Inserts Cutter Diameter Kg Shank Diameter Gage Length Pitch UoM Price TB4367 R A10-07L L Ea $ TB4369 R A09L-07L L Ea $ TB4370 R A10-07L L Ea $ TB4372 R A12-07L L Ea $ TB4373 R A12-07M M Ea $ TB4375 R A10L-07L L Ea $ TB4377 R A12-07L L Ea $ TB4376 R A12-07M M Ea $ TB4380 R A14-07L L Ea $ TB4381 R A14-07M M Ea $ TB4384 R A12L-07M M Ea $ TB4385 R A14-07M M Ea $ TB4387 R A16-07M M Ea $ TB4389 R A14L-07M M Ea $ TB4390 R A16-07H H Ea $ TB4391 R A16-07M M Ea $ TB4395 R A20-07H H Ea $ TB4396 R A20-07M M Ea $ TB4399 R A25-07H H Ea $ TB4400 R A25-07M M Ea $ Sandvik 90 Degree Milling Insert Light Duty - Steel - Finishing CoroMill 390 Shoulder milling Common Specifications: Right Hand Metric 2 edges HNA# Part# Insert Grade Material Class Coating Type Coating Comp. Thickness Corner Radius Edge Length UoM Price TB R E-PL P30 PVD TiAIN 2.4mm 0.4mm 6.92mm Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

17 Sandvik 90 Degree Milling Insert Medium Duty - Steel - Medium CoroMill 390 Shoulder milling Common Specifications: Right Hand Metric 2 edges HNA# Part# Insert Grade Material Class Coating Type Coating Composition Thickness Corner Radius Edge Length UoM Price TB R M-PM P30 PVD PVD - TiAlN (Zertivo ) 2.4mm 0.4mm 6.92mm Ea $15.18 Sandvik 90 Degree Milling Insert Medium Duty - Steel - Medium CoroMill 390 Shoulder milling Common Specifications: Right Hand Metric 2 edges HNA# Part# Insert Grade Material Class Coating Type Coating Composition Thickness Corner Radius Edge Length UoM Price TB R M-PM P25 MTCVD TiCN + Al2O3 + TiN 2.4mm 0.4mm 6.92mm Ea $15.18 TB R M-PM P40 MTCVD TiCN + Al2O3 + TiN 2.4mm 0.4mm 6.92mm Ea $15.18 Sandvik 90 Degree Milling Insert Light Duty - Cast Iron - Finishing CoroMill 390 Shoulder milling Common Specifications: Right Hand Metric 2 edges HNA# Part# Insert Grade Material Class Coating Type Coating Composition Thickness Corner Radius Edge Length UoM Price TB R E-KL K20 PVD TiAIN 2.4mm 0.4mm 6.92mm Ea $19.00 Sandvik 90 Degree Milling Insert Medium Duty - Cast Iron - Medium CoroMill 390 Shoulder milling Common Specifications: Right Hand Metric 2 edges HNA# Part# Insert Grade Material Class Coating Type Coating Composition Thickness Corner Radius Edge Length UoM Price TB R M-KM K20 PVD TiAIN 2.4mm 0.4mm 6.92mm Ea $15.18 TB R M-KM K30 MTCVD Invieo MT-TiCN 2.4mm 0.4mm 6.92mm Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 15

18 Sandvik 90 Degree Milling Insert Light Duty - Stainless Steel - Finishing CoroMill 390 Shoulder milling Common Specifications: Right Hand Metric 2 edges HNA# Part# Insert Grade Material Class Coating Type Coating Composition Thickness Corner Radius Edge Length UoM Price TB R E-ML M35 PVD TiAIN 2.4mm 0.4mm 6.92mm Ea $19.00 Sandvik 90 Degree Milling Insert Medium Duty - Stainless Steel - Medium CoroMill 390 Shoulder milling Common Specifications: Right Hand Metric 2 edges Tolerance class E HNA# Part# Insert Grade Material Class Coating Type Coating Composition Thickness Corner Radius Edge Length UoM Price TB R E-MM M35 PVD TiAIN 2.4mm 0.4mm 6.92mm Ea $19.00 Sandvik 90 Degree Milling Insert Medium Duty - Stainless Steel - Medium CoroMill 390 Shoulder milling Common Specifications: Right Hand Metric 2 edges Tolerance class M HNA# Part# Insert Grade Material Class Coating Type Coating Composition Thickness Corner Radius Edge Length UoM Price TB R M-MM M35 PVD TiAIN 2.4mm 0.4mm 6.92mm Ea $15.18 Sandvik 90 Degree Milling Insert Light Duty - Heat Resistant and Titanium - Finishing CoroMill 390 Shoulder milling Common Specifications: Right Hand Metric 2 edges HNA# Part# Insert Grade Material Class Coating Type Coating Composition Thickness Corner Radius Edge Length UoM Price TB R E-ML S30T S30T S20 PVD TiAIN 2.4mm 0.4mm 6.92mm Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

19 Sandvik 90 Degree Milling Insert Medium Duty - Heat Resistant and Titanium - Medium CoroMill 390 Shoulder milling Common Specifications: Right Hand Metric 2 edges Tolerance class E HNA# Part# Insert Grade Material Class Coating Type Coating Composition Thickness Corner Radius Edge Length UoM Price TB R E-MM S30T S30T S25 PVD TiAIN 2.4mm 0.4mm 6.92mm Ea $19.00 Sandvik 90 Degree Milling Insert Medium Duty - Heat Resistant and Titanium - Medium CoroMill 390 Shoulder milling Common Specifications: Right Hand Metric 2 edges Tolerance class M HNA# Part# Insert Grade Material Class Coating Type Coating Composition Thickness Corner Radius Edge Length UoM Price TB R M-MM S30T S30T S25 PVD TiAIN 2.4mm 0.4mm 6.92mm Ea $15.18 Osborn International Knot Wire End Brushes Stem Mounted Rugged brushing tools designed with the finest wire to offer efficient usage for a wide variety of tough cleaning and maintenance applications; can be used on CNC equipment. Available with steel, stainless steel and brass wire. Certain styles are available in clamshell packaging. Common specifications Shank size: 1/4 HNA# Part# Diameter Wire Size Fill RPM Trim Length UoM Price ¹ ₂" Steel 22,000 1¹ ₈ Ea $ ¹ ₂" Steel 20,000 1¹ ₈ Ea $ " Steel 20,000 1 Ea $ " Steel 20,000 1¹ ₈ Ea $ ³ ₄" Steel 20,000 1¹ ₈ Ea $ " Steel 20,000 1¹ ₈ Ea $21.07 PROTO 1" DRIVE INLINE AIR IMPACT WRENCH PROTO Pistol Grip Pneumatic Impact Wrenches Excellent power to weight ratio Rubber bumper for durability Tool support hangers for use with balancers 2 Stage trigger for more control Adjustable side handle included Comfort grip for low vibration Excellent Power to Weight Ratio Rubber bumper for durability Tool Support hangers for use with balancers 2 Stage Trigger for more control Adjustable Side Handle Included Comfort grip for low vibration Compact size for tight spaces 5,000 rpm 1,000 bpm HNA# Part# Drive Size Breakaway Torque Blows per Minute RPM UoM Price TA8388 J199WD 1" Ea $ HNA# Part# Drive Size Torque ft.lb. Length UoM Price TA8323 J199WP 1" Drive Ea $ TA8325 J199WP-6 1" Drive Ea $ TA8324 J199WP-S #5 Spline Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 17

20 PROTO Inline Pneumatic Impact Wrenches PROTO Titanium Series Sealed Head Pneumatic Ratchets Excellent Power to Weight Ratio. Rubber bumper for durability. Tool support hangers for use with balancers. 2 Stage Trigger for more control. Adjustable Side Handle Included. Comfort grip for low vibration. 1,000 bpm HNA# Part# Drive Size Torque ft.lb. RPM Length UoM Price TA8322 J199WD-6 1" Drive Ea $ TA8321 J199WD-S #5 Spline Ea $ Sioux Tool Impact Wrenches 3/4 Inch Drive Light weight composite housing with aluminum nose Increased power through motor & impact mechanism designs Grease Clutch, Reverse biased, One hand Forward / Reverse operation HNA# Part# RPM Sioux Tool Impact Wrenches 1/2 Inch Drive Socket Retainer Style Max. Torque ft. - lbs. UoM Price TB4950 IW750MP-6H 6700 Hole 1050 Ea $ TB4951 IW750MP-6P 6700 Pin 1050 Ea $ H05656 IW750MP-6R 6700 Friction Ring 1050 Ea $ Titanium housing helps to reduce weight, improve balance and ensure maximum durability. Low profile head for access into tight areas. Quick release socket mechanism for easy socket changes. Forward/reverse control ring positioned away from ratcheting head for greater usability. Feather start trigger for maximum operator control. 360º directional exhaust. Integrated tethering capability in all Proto air tools. HNA# Part# Drive Size RPM Length UoM Price AF6138 J139RSH ³ ₈" Drive ¹³ ₃₂" Ea $ Master Power Pneumatic Air Impact Nutrunners MP2600 Series High power to weight ratio Speed of a screwdriver, power of an impact Ideal for soft joint applications 4 built-in speed control regulator positions for varying torque output Smooth and efficient impact mechanism creates no torque reaction Compact clutch design 100% ball bearing design Reversible Detachable belt clip (MP2264, MP2265) Specs: Bolt Capacity: 1/2 Weight: 2.2 lbs Air Consumption: 20 CMF Torque range: HNA# Part# Drive Free Speed BPM UoM Price Pistol E91258 MP2264B ¹ ₄" QC Ea $ PROTO Angle Pneumatic Impact Wrenches Titanium housing helps to reduce weight, improve balance and ensure maximum durability. Ergonomically designed handleforward design improves balance and control, helping to reduce operator fatigue. Robust twin hammer mechanism for efficient energy transfer and long service life. Ambidextrous forward/reverse lever can be actuated with a single hand, even with gloves on. Three position power regulator for forward rotation. Reverse rotation operates at maximum for highest breakaway torque. Feather throttle for maximum operator control. Side-fed, 6-vane air motor for maximum power and efficiency. Machined motor housing reduces number of parts, creating precision alignment, reducing wear, increasing efficiency and simplifying maintenance. 360º rotating air inlet fitting. Titanium exhaust deflector and muffler. Integrated tethering capability in all Proto air tools. "Power-Flare" Geometry reduces stress and increase contact area 40% for a longer lasting mechanism. Power/Weight - Built upon power with a focus on weight reduction Ergonomics - Implement principles associated with grip biomechanics, anthropometry, and muscle physiology, One hand Forward / Reverse operation HNA# Part# Max. Torque ft. - lbs. Socket Retainer Style UoM Price F79370 IW500MP-4P 780 Pin Ea $ F79371 IW500MP-4R 780 Ring Ea $ HNA# Part# Drive Size AC5607 J138WP ³ ₈" Drive AC5609 J150WP ¹ ₂" Drive AC5610 J150WP-C ¹ ₂" Drive AC5611 J175WP ³ ₄" Drive BPM Torque ft.lb. RPM Length UoM Price " Ea $ ³ ₃₂" Ea $ ³ ₃₂" Ea $ ²⁹ ₃₂" Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

21 PROTO Angle Pneumatic Impact Wrenches 3/8 Inch Drive Low profile head improves access to tight areas while housing design contains gearing to reduce maintenance issues. Impact mechanism provides high torque with little reaction, improving safety and reducing effort. Feather start trigger and forward/ reverse ring for ease of use and increased productivity. Exhaust deflectors with integrated tethering connections for reduced noise and improved safety when working at heights. HNA# Part# Drive Size BPM Torque ft.lb. RPM Length UoM Price AC5606 J138WA ³ ₈" Drive ¹⁵ ₁₆" Ea $ PROTO Pneumatic Air Angle Impact Wrench 1/2 Inch Drive Low profile head improves access to tight areas while housing design contains gearing to reduce maintenance issues. Impact mechanism provides high torque with little reaction, improving safety and reducing effort. Feather start trigger and forward/reverse ring for ease of use and increased productivity. Exhaust deflectors with integrated tethering connections for reduced noise and improved safety when working at heights HNA# Part# Drive Size Breakaway Torque Sioux Tool Pneumatic Air Impact Driver 3/8 Inch Drive High power to weight ratio High impact rate of 5,000 blows per minute Working torque range up to 95 ft/lbs Extended life through bearing design Smooth Impacting that creates minimal torque reaction Includes rubber boot for hammer case Sioux Tool 3/8 Inch Drive Pneumatic Air Impact Drivers High power to weight ratio High impact weight of 5,000 blows per minute Working torque range up to 95 ft/lbs Extended life through bearing design Smooth impacting that creates minimal torque reaction Includes rubber boot for hammer case Max torque: ft. lbs. Working torque: ft. lbs Blows per Minute RPM UoM Price AC5608 J150WA 1/2" Ea $ HNA# Part# Drive Size RPM UoM Price TB4949 IW375AP-3P ³ ₈" Drive 4000 Ea $ HNA# Part# BPM RPM Length Socket Retainer Style UoM Price TB4948 IW375AP-3F " Ring Ea $ Sioux Tool Pneumatic Air Hex Bit Impact Driver 1/4 Inch Hex Chuck High power to weight ratio High impact rate of 5,000 blows per minute Working torque range up to 55 ft/lbs Extended life through bearing design Smooth Impacting that creates minimal torque reaction Includes rubber boot for hammer case HNA# Part# RPM UoM Price H05655 ID375AP-2Q 4000 Ea $ Sioux Tool Rapid Reverse Screwdrivers Signature Series Rapid Reverse Feathering Trigger (Teasing) Ergonomic Grip 1/4" Quick Change Light Weight Aluminum Housing Low Noise Easy to Maintain Drop-in Motor Stall Drive or Positive Clutch HNA# Part# Size Hp RPM Clutch UoM Price TB4969 SSD10P20PRR ¹ ₄"QC Stall Ea $ Sioux Tool Rapid Reverse Drills Signature Series Rapid Reverse Feathering Trigger Ergonomic Grip Light Weight Aluminum Housing Easy to Maintain Drop-in Motor Low Noise Spindle thread: 3/ Planet Gear System HNA# Part# Size Hp RPM UoM Price TB4967 SDR6P20R3RR ³ ₈" Ea $ TB4966 SDR6P20RK3RR ³ ₈" Keyless Ea $ TB4968 SDR6P25R3RR ³ ₈" Ea $ TB4964 SDR10P20R3RR ³ ₈" Ea $ TB4965 SDR10P25R3RR ³ ₈" Ea $ Sioux Tool Pneumatic Air Straight Die Grinders 1/4 Inch Collet -.3Hp - Lever Throttle Powerful 5 vane motors deliver high working speeds Heavy duty double tapered collet Ergonomic comfort grip Teasing throttle for maximum control Lever throttle with lock-off Ball bearing construction Adjustable speed control HNA# Part# Size Exhaust Hp RPM UoM Price SDG03S25 [1/4"] Rear Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 19

22 Dynabrade.4 hp Straight-Line Pneumatic Air Die Grinder Rear Exhaust.4 hp Straight-Line Die Grinder 25,000 RPM, Gearless, Front Exhaust, 1/8" Collets Governor-control maintains consistent motor speed under load and delivers optimal power. Features standard muffler for more compact design. Specifications: Collet Size: 1/8" hp (W):.4 (298) Motor Free Speed (RPM): 25,000 Exhaust Type: Rear Max. Air 90 PSIG (6.2 Bar): SCFM (L/Min.): 23 (651) Air Pressure PSIG (Bar): 90 (6.2) Length Inches (mm): 6.4 (162) Height Inches (mm): 1.7 (44) Sound Level db(a): 79 Vibration Tool Peak Axis ISO8662 (m/secð): 5 Weight Pound (kg):.9 (.4) HNA# Part# Size UoM Price ¹ ₈" Ea $ Sioux Tool Pneumatic Air Straight Die Grinders 1/4 Inch Collet -.5Hp - Lever Throttle 200 Series Collet Powerful 5 vane motors deliver high working speeds Heavy duty double tapered collet Ergonomic comfort grip Teasing throttle for maximum control Lever throttle with lock-off Ball bearing construction Adjustable speed control HNA# Part# Exhaust Hp RPM UoM Price TB4960 SDG05S18 Rear Ea $ Sioux Tool Straight Die Grinders 0.5 hp - Lever Throttle Series Collet Powerful 5 vane motors deliver high working speeds Heavy duty double tapered collet Ergonomic comfort grip Teasing throttle for maximum control Lever throttle with lock-off Ball bearing construction Adjustable speed control HNA# Part# Collet Size RPM Exhaust UoM Price TB4961 SDG05S23 ¹ ₄" 23,000 Rear Ea $ Sioux Tool Pneumatic Air Extended Die Grinders 1/4 Inch Collet -.5Hp - Lever Throttle 200 Series Collet Heavy duty double tapered collet Ball bearing construction Ergonomic comfort grip Adjustable speed control Teasing throttle for maximum control Lever throttle with lock-off HNA# Part# Size Exhaust Hp RPM UoM Price TB4979 SXG05S23 [1/4"] Rear Ea $ Sioux Tool High Torque Die Grinders 1 hp - Lever Throttle - High Torque Series Collet Powerful 5 vane motors deliver high working speeds Heavy duty double tapered collet Teasing throttle for maximum control Lever throttle with lock-off Ball bearing construction Heavy Duty spiral bevel gearing for durability and smooth operation Compact angle head allows access into tight spaces Adjustable speed control Grease zerk in gear case Offset gear box for increased torque HNA# Part# Collet Size RPM Exhaust UoM Price TB4962 SDG10SHT08 ¹ ₄" 8,000 Rear Ea $ TB4963 SDG10SHT12 ¹ ₄" 12,000 Rear Ea $ Sioux Tool Extended Die Grinders 0.5 hp - Lever Throttle - Extended Series Collet Powerful 5 vane motors deliver high working speeds Heavy duty double tapered collet Ergonomic comfort grip Teasing throttle for maximum control Lever throttle with lock-off Ball bearing construction Adjustable speed control HNA# Part# Collet RPM Exhaust Length UoM Price Size TB4978 SXG05S18 ¹ ₄" 18,000 Rear 11" Ea $ Sioux Tool Pneumatic Air Extended Die Grinders 1/4 Inch Collet - 1Hp - Lever Throttle 200 Series Collet Heavy duty double tapered collet Ball bearing construction Ergonomic comfort grip Adjustable speed control Teasing throttle for maximum control Lever throttle with lock-off HNA# Part# Size Exhaust Hp RPM UoM Price Z40284 STXG10S18 [1/4"] Rear Ea $ Sioux Tool Extended Die Grinders 1 HP Lever Throttle 200 Series Collet Powerful 5 vane motors deliver high working speeds Heavy duty double tapered collet Ergonomic comfort grip Teasing throttle for maximum control Lever throttle with lock-off Ball bearing construction Adjustable speed control HNA# Part# Collet Size RPM Exhaust Length UoM Price Z40282 STXG10S12 ¹ ₄" 12,000 Rear 12.1" Ea $ Z40286 STXG10S23 ¹ ₄" 23,000 Rear 12.1" Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

23 Sioux Tool Pneumatic Air Right Angle Die Grinders 1/4 Inch Collet -.3Hp - Lever Throttle 200 Series Collet Powerful 5 vane motors deliver high working speeds Heavy duty double tapered collet Teasing throttle for maximum control Lever throttle with lock-off Ball bearing construction Heavy Duty spiral bevel gearing for durability and smooth operation Compact angle head allows access into tight spaces Adjustable speed control Grease zerk in gear case HNA# Part# Size Exhaust Hp RPM UoM Price SAG03S20 ¹ ₄" Rear Ea $ Sioux Tool Pneumatic Air Right Angle Die Grinders 1/4 Inch Collet -.3Hp - Lever Throttle 200 Series Collet Powerful 5 vane motors deliver high working speeds Heavy duty double tapered collet Teasing throttle for maximum control Lever throttle with lock-off Ball bearing construction Heavy Duty spiral bevel gearing for durability and smooth operation Compact angle head allows access into tight spaces Adjustable speed control Grease zerk in gear case Dynabrade Right Angle Pneumatic Air Die Grinder 1/4 Inch - Rear Exhaust Kevlar phenolic vanes for longer life. Lightweight ergonomic design for greater comfort and control. One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels for enhanced operator comfort. All have air passage to continually cool the gear box; gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment. Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product. Governor-controlled motor maintains speed under load. Includes both 1/4" & 6mm collet inserts. HNA# Part# Size RPM UoM Price ¹ ₄" 20,000 Ea $ Sioux Tool Angle Cutoff Tools Type 1 - Rear Exhaust HNA# Part# Size Exhaust Hp RPM UoM Price TB4952 SAG03S12 ¹ ₄" Rear Ea $ Sioux Tool Pneumatic Air Right Angle Die Grinders 1/4 Inch Collet -.5Hp - Lever Throttle 200 Series Collet Powerful 5 vane motors deliver high working speeds Heavy duty double tapered collet Teasing throttle for maximum control Lever throttle with lock-off Ball bearing construction Heavy Duty spiral bevel gearing for durability and smooth operation Compact angle head allows access into tight spaces Adjustable speed control Grease zerk in gear case HNA# Part# Size Exhaust Hp RPM UoM Price C72354 SAG05S23 [1/4"] Rear Ea $ Heavy duty spiral bevel gearing for durability and smooth operation 4 position indexable angle head, 360 degree rotatable guard Grease zerk in gear case HNA# Part# Size Cut Depth RPM Spindle Thread UoM Price TB4953 SCO10A106 6" 2" 10,000 ⁵ ₈-11 Ea $ TB4954 SCO10A125 5" 1¹ ₂" 12,000 ⁵ ₈-11 Ea $ TB4955 SCO10A184 4" 1.2" 18,000 ³ ₈-24 Ea $ Sioux Tool Angle Cutoff Tools Type 1 Full 1 HP air motor maintains power under load Aluminum reinforced housing with comfort grip Ball bearing construction, Teasing throttle for maximum control 360 degree rotatable guard, Adjustable speed control HNA# Part# Size Cut Depth RPM Exhaust UoM Price TB4956 SCO10S184F 4" 1.1" 18,000 Front Ea $ TB4957 SCO10S184R 4" 1.1" 18,000 Rear Ea $ TB4958 SCO10S204F 4" 1.1" 20,000 Front Ea $ TB4959 SCO10S204R 4" 1.1" 20,000 Rear Ea $ Z40069 SCO10S253F 3" 1" 25,000 Front Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 21

24 Sioux Tool Type 27 Right Angle Grinders 1 HP Lockoff Lever Throttle Sioux Tool Type 27 Right Angle Grinders 1 hp Lockoff Lever Throttle Non-governed Rear exhaust HNA# Part# Size RPM Spindle Length UoM Price Thread Z40277 SWG10S124 4" 12,000 ³ ₈ " Ea $ Sioux Tool Pneumatic Air Right Angle Grinders Type 27 Wheels - 1Hp Features: Governed & Non-Governed Lockoff Lever & Thumb Throttle Side Exhaust Sound level: 77Db Performance Power: 1 hp (0.75 kw) Rear exhaust 12,000 rpm, 7.75 long HNA# Part# Size Spindle Thread UoM Price E98749 SWG10A124 4" ³ ₈-24 Ea $ TB4976 SWG10A " ⁵ ₈-11 Ea $ TB4977 SWG10A125 5" ⁵ ₈-11 Ea $ Dynabrade Pneumatic Air Disc Sanders Rear Exhaust HNA# Part# Size RPM Length UoM Price Z72165 SWG10S183 3" " Ea $ Z40278 SWG10S " " Ea $ Sioux Tool Type 27 Extended Right Angle Grinders 1 HP Lockoff Lever Throttle Non-governed Adjustable Guard 12,000 rpm Rear exhaust HNA# Part# Size Spindle Thread Length UoM Price TB4973 SWG10AX124 4" ³ ₈ " Ea $ TB4975 SWG10AX125 5" ⁵ ₈ " Ea $ Sioux Tool Pneumatic Air Right Angle Grinders Type 27 Wheels - 1Hp Full 1 HP, 5 vane air motor maintains power under load Ergonomic comfort grip Ball bearing construction Teasing throttle for maximum control Rotatable guard 4 position indexable angle head Lever throttle with lock-off Grease zerk in gear case 12,000 rpm HNA# Part# Size Spindle Thread Exhaust UoM Price TB4974 SWG10AX ⁵ ₈-11 Rear Ea $ Each model includes Disc Pad Assembly for slotted center-hole abrasive discs. Gearless motor for reduced maintenance and downtime. Governor-controlled to maintain RPM under heavy load. Removable side handle. Hose I.D. 3/8 Air Inlet Thread: 1/4 NPT Tool Thread: 5/8-11 Male Pistol Grip 0.7 hp Rear Exhaust HNA# Part# Size RPM UoM Price ¹ ₂" Ea $ Dynabrade Heavy Duty Pneumatic Air Belt Tool Mini-Dynafile Grind, sand, and deburr in those tight spots! Tool includes Contact Arm for 1/2" wide x 12" long abrasive belts; other arms available for 1/ 8" and 1/4" wide belts. Lightweight, ergonomic tool. Rear exhaust. Light grinding and deburring applications. Great for engine porting. Accepts coated and abrasive impregnated non-woven nylon belts. Common specifications Screw-off belt guard for easy abrasive change. Multi-position grinding head pivots 180 Motor hp-.4 Motor rpm-25,000 Sound Level-80 db(a) Abrasive Belt Size-1/8-1/2 (3-13) W x 12 (305) L Maximum Air Flow-20(566), Maximum SFPM- 4,890 Weight- 1.8 pounds Length in, mm- 113/4 (298), Height in, mm- 31/2 (89) HNA# Part# Size RPM UoM Price ¹ ₂"x12" Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

25 Dynabrade Pneumatic Air Belt Sander Dynafile II Reach normally inaccessible areas New lightweight ergonomic design handle features 7 offset Interchangeable arms for 18, 20 1/2 and 24 belts (Kit Only) Abrasive Belt Size: 1/4-3/4 W x L Grinding head pivots 360 Ideal for use with coated abrasive and non-woven nylon belts Air motor has adjustable speed HNA# Part# Size RPM Description UoM Price Includes: Arm ¹ ₄"-³ ₄"x18"-24" Ea $ ³ ₄"x18" belts Dynabrade Pneumatic Air Abrasive Belt Tool Dynafile World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and more! Grind from contact wheel or platen pad. Finish and polish using slack of belt. For use on metal, plastic, fiberglass, composites, rubber, glass and stone. Tool includes Contract Arm for standard use. Also accepts a variety of additional Contact Arms. Motor easily adjusts to the most comfortable throttle lever position. Superior belt tracking permits use of 1/8, 1/4 or 1/2 wide x 24 long abrasive belts. Work in areas as small as 3/8 diameter. Lightweight composite belt guard allows quick and easy belt change! Hard and soft platen pads mount onto contact arms for heavy grinding or contour polishing. Common specifications.5 Motor hp 20,000 Motor rpm 77 db(a) Sound Level 1/8-1/2 (3-13) W x 24 (610) L Abrasive Belt Size 31 Maximum Air Flow SCAM 5,8000 Max. SFPM 1/4 NPR Air Inlet Thread 3 pounds Weight 14.6 inches for length 4.6 inches for height HNA# Part# Size Description RPM UoM Price ¹ ₂"x24" Tool Only Ea $ Dynabrade Universal Joint Air Line Connector 1/4 NPT Dynaswivel Never fight an air hose again! For use with most air tools The Dynaswivel is a universal-joint that connects portable air tools to an air line. The Dynaswivel improves tool maneuverability operator fatigue and extended hose life Thread size: 1/4 NPT Recommended Air Flow Range: Up to 25 CFM HNA# Part# UoM Price Ea $19.42 Guardair Thumbswitch Safety Air Gun Bench-top and Extended Reach THUMBSWITCH Series Compact design fits comfortably in the palm of your hand. Venturi nozzle delivers safe yet powerful thrust. Features: Durable, cast aluminum body Comfortable, steel trigger Aluminum venturi nozzle 1/4" FNPT inlet Meets OSHA Standards HNA# Part# Output Thrust db UoM Price lb 97 Ea $12.67 Guardair Compact Thumbswitch Safety Air Gun Bench-top and Extended Reach THUMBSWITCH Serie Our most compact design fits comfortably in the palm of your hand. Venturi nozzle delivers safe yet powerful thrust. Features: Durable cast zinc body Rubber cushioned, steel trigger Convenient hanging hook Brass venturi nozzle 1/4" FNPT Inlet Meets OSHA Standards HNA# Part# Output Thrust db UoM Price T lb 104 Ea $12.08 Guardair Jet Guard Safety Air Gun Classic+ Sereis - Bench-Top Featuring a proprietary, protective air cone to shield against dangerous chip fly-back, the 74S is perfect for close-in applications. Ergonomic, Classic+ pistol grip-style handle provides maximum user comfort. Features: Durable cast aluminum body with hanging hook Wide comfort trigger Safety air shield 1/4" FNPT inlet Meets and Exceeds OSHA Standards Focused brass nozzle Specifications: HNA# Part# UoM Price S Ea $19.54 Guardair Pistol Grip Safety Air Gun Bench-Top Lazer Series With a unique, ergonomic, pistolgrip design, the LZR650 provides hours of fatigue-free operation. Integrated hanging eyelet for easy storage and retrieval. Powerful, accurate. Perfect for DIY, automotive, and industrial cleaning applications. Features: Lightweight, all metal construction Wide, contoured trigger Brass venturi nozzle 1/4" FNPT inlet Meets OSHA Standards HNA# Part# Output Thrust db UoM Price TB4940 LZR lb 100 Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 23

26 Guardair Booster Safety Air Gun With 6 Extension Delivers all the features of the 74S but with 25% more thrust. Ideal for stubborn and difficult applications where only the most powerful air gun will do. Proprietary, protective air cone shields against dangerous "chip fly-back." Ergonomic, Classic+ pistol grip-style handle provides maximum user comfort. Available in 6" and 18" lengths. Features: Durable cast aluminum body with hanging hook Wide comfort trigger Pinned, tamper proof, air-shield nozzle Screw-on brass extension 1/4" FNPT Inlet Meets OSHA Standards HNA# Part# Output Thrust db UoM Price S lb 104 Ea $25.44 Guardair Whisper Jet Safety Air Gun First safety air gun to incorporate exclusive Whisper Jet nozzle technology to reduce air gun noise. Solid conical tip prevents blockage of nozzle. Ideal for cleaning bench tops, work stations, or machinery in noise sensitive areas. Features ergonomic, Classic+ pistol gripstyle handle for maximum user comfort. Features: Durable cast aluminum body Rugged hanging hook Wide comfort trigger Powerful aluminum Whisper Jet silencer nozzle 1/4" FNPT inlet Meets OSHA Standards HNA# Part# Output Thrust db UoM Price WJ 1.1lb 93 Ea $23.87 Guardair Xtra Thrust Safety Air Guns Classic+ Series Guardair Xtra Thrust Safety Air Guns CLassic+ Series Model 75XT Guardair's Xtra Thrust Series provides all the benefits of the Long John Series but with 40% more power. Ideal for the toughest applications and to move the heaviest debris, the Xtra Thrust nozzle generates over 300% more thrust compared to conventional air guns, yet limits static pressure to less than 30 psi should the tip become blocked. Ergonomic, Classic+ pistol gripstyle handle provides maximum user comfort. Available in 6" - 72" lengths. Features: Durable cast aluminum body with hanging hook Full length comfort trigger Rugged aluminum extension Powerful zinc alloy Xtra Thrust nozzle 1/4" FNPT inlet Meets OSHA Standards HNA# Part# Length Output Thrust db UoM Price XT012AA 12" 2.8lb 108 Ea $ XT024AA 24" 2.8lb 108 Ea $ XT036AA 36" 2.8lb 108 Ea $39.77 Guardair Air Gun High Power Model 75LJ Long John The perfect tool for cleaning inaccessible and hard-to-reach areas, "Long John" safety air guns are used for blowing floor debris, cleaning masonry forms, tanks, ovens, molds, and rafters, as well as machinery and storage areas. Efficient venturi nozzle boosts thrust up to 200% over conventional air guns, yet limits static pressure to less than 30 psi should the tip become blocked. Ergonomic, Classic+ pistol grip-style handle provides maximum user comfort. Available in 6" - 72" lengths. Features: Durable cast aluminum body with hanging hook Wide comfort trigger Rugged aluminum extension Powerful zinc alloy venturi nozzle 1/4" FNPT inlet Meets OSHA Standards HNA# Part# Size Output Thrust db UoM Price LJ006AA 6" 2.0lb 107 Ea $ LJ012AA 12" 2.0lb 107 Ea $29.70 E LJ018AA 18" 2.0lb 107 Ea $31.07 E LJ024AA 24" 2.0lb 107 Ea $ LJ036AA 36" 2.0lb 107 Ea $35.20 Guardair High Power Safety Air Gun Ultra Venturi Bench Top and Extended Reach ULTRA Series Featuring the Xtra Thrust venturi nozzle, the 75XXT delivers over 300% more thrust than conventional air guns. Designed for tough, close-in work. Features ergonomic, Classic+ pistol grip-style handle for maximum user comfort. Most powerful Guardair bench-top gun. Features: Durable cast aluminum body Rugged hanging hook Full length comfort trigger Zinc alloy Xtra Thrust venturi nozzle 1/4 FNPT inlet Meets OSHA Standards HNA# Part# Output db UoM Price Y XXT 2.5lb 108 Ea $27.55 Versatile and rugged Ultra Venturi Series offers the ultimate in safety air gun performance and comfort. Ideal for cleaning inaccessible and hard-to-reach areas. Efficient venturi nozzle boosts thrust up to 300% over conventional air guns, yet limits static pressure to less than 30 psi should the tip become blocked. Patented, adjustable hanging hook can be repositioned for convenient storage. Ergonomic, cushioned pistol-grip style handle provides unparalleled comfort. Features: Cast aluminum body with premium cushion grip Ergonomic trigger Adjustable hanging hook Aluminum extension Zinc alloy venturi nozzle 3/8 FNPT inlet Meets OSHA Standards HNA# Part# Trigger Length Extension Output Thrust db UoM Price AG7826 U75LJ012AA2 Short 12" 2.8lb 104 Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

27 Guardair Maximum Power Safety Air Gun Top and Extended Reach ULTRA XTRA THRUST Series Ultra Xtra Thrust Series delivers maximum thrust along with superior performance and comfort. Engineered for the toughest applications and to move the heaviest debris, Ultra Series Xtra Thrust generates the highest thrust in the Ultra Family yet limits static pressure to less than 30 psi should the tip become blocked. Patented, adjustable hanging hook can be repositioned for convenient storage. Ergonomic, cushioned pistol-grip style handle provides unparalleled comfort. Cast aluminum body with premium cushion grip Full length contoured ergonomic trigger Adjustable hanging hook Aluminum extension and Zinc alloy Xtra Thrust nozzle 3/8" FNPT inlet Meets OSHA Standards HNA# TA7968 Part# U75XT0 48AA2 Trigger Length Extensi on Guardair Blind Hole Safety Air Gun Model 74BH006Z Output Thrust Specifically designed to clean out blind holes in metal, wood, and plastic work pieces. Delivers a high velocity jet of air into deep crevices and blind holes to flush out chips and dirt. Proprietary, protective air cone shields against dangerous "chip flyback." Ergonomic, Classic+ pistol grip-style handle provides maximum user comfort. Durable cast aluminum body with hanging hook Wide comfort trigger, Safety air shield 3/16" OD brass extension with 1/8" OD plastic stylus tip 1/4" FNPT inlet Meets OSHA Standards db UoM Price Short 48" 3.3lb 101 Ea $53.22 HNA# Part# Length Output Thrust db UoM Price F BH006Z 6" 0.1lb 103 Ea $28.48 Guardair Syphon Spray Gun Economical Model 79SG012 Designed for heavy-duty use, the versatile 79SG012 Syphon Gun is ideal for spraying oils, solvents, insecticides, and coatings. Powerful syphon delivers up to 16 gallons of liquid per hour. Features 12" extension for spraying hard-to-reach locations. Adjustable nozzle tip controls flow and spray pattern. Classic+ pistol-grip style handle provides maximum user comfort. Durable cast aluminum body with hanging hook Wide comfort trigger 6', 1/4" ID, clear PVC feed tube with brass sinker 12" aluminum extension Brass nozzle tip 1/4" FNPT inlet, Flow Rate: 16gph Air Usage: 9cfm HNA# Part# UoM Price J SG012 Ea $70.24 Guardair Gun Vac Kit Gun Vac Series Place twice the power of a standard shop vacuum in the palm of your hand. Powered by standard shop compressed air, the lightweight 1500 Gun Vac has no electric motors to burn out. Easy to empty, high filtration collection bag attaches to rear of vacuum via hose cuff. Tapered vacuum inlet accepts all standard 1-1/4 vac accessories. Unit hangs on a hook, ready for use at anytime. Rugged, all metal construction, Contoured comfort grip Convenient hanging eyelet, High filtration collection bag with zipper 9" crevice tool included, 1/4" FNPT bottom and rear inlets Incoming Air Line Pressure (psig): 100 Vacuum Lift: 75(in H2O), Vacuum Flow: 78cfm Noise Output: 89 db HNA# Part# UoM Price Ea $91.26 J H Williams Industrial Products Inc 6 & 12 Point Rugged-Case-System Tool Set 146 Piece - 1/4, 3/8 & 1/2 Inch Drive - Fractional & Metric All tools are professional quality, made of high-grade chrome vanadium steel. Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener. Packed in rugged high-density polyethylene (HDPE) cases that are strong and durable yet light in weight. Case is shock proof at both high and low temperatures, equipped with heavy-duty metal latches and hinges. Two-component handles are easy to grip and comfortable to carry. 1/4" Drive Tools:Ratchet: 3" Extension Handle, Universal Joint, Adaptor 1/4" F Þ 3/8" M 3/8" Drive Tools: Ratchet, 3" Extension, 6" Extension 1/2" Drive Tools: Ratchet, 6" Extension, 10" Extension, Universal Joint, Adaptor - 1 2" F x 3 8" M 1/4" Drive Deep 6 Point Sockets: 4mm-13mm; 3 16", 7 32", 1 4", 9 32", 5 16", 11 32", 3 8", 7 16", 1 2" 3/8" Drive Deep 12 Point Sockets: 6mm-19mm; 1 4", 5 16", 3 8", 7 16", 1 2", 9 16", 5 8", 11 16", 3 4", 13 16", 7 8", 15 16", 1" 1/4" Drive Shallow 6 Point Sockets: 4-14mm; 5 32", 3 16", 7 32", 1 4", 9 32", 5 16", 11 32", 3 8", 7 16", 1 2", 9 16" 3/8" Drive Shallow 6 Point Sockets: 6mm-19mm; 1 4", 5 16", 3 8", 7 16", 1 2", 9 16", 5 8", 11 16", 3 4", 13 16", 7 8", 15 16", 1" 1/2" Drive Shallow 12 Point Sockets: 3 8", 7 16", 1 2", 9 16", 5 8", 11 16", 3 4", 13 16", 7 8", 15 16", 1" 1/4" Drive Hex Bit Sockets: 3mm-8mm; 1 8", 5 32", 3 16", 7 32", 1 4", 5 16" 1/4" Drive Screwdriver Bit Sockets: 5 32" Slotted Tip 7 32" Slotted Tip 9 32" Slotted Tip #0 Phillips Tip #1 Phillips Tip #2 Phillips Tip 1/4" Drive Torx Bit Sockets: T10, T15, T20, T25, T27, T30 3/8" Drive Spark Plug Socket: 5 8", 13 16" HNA# Part# Number in Set Drive Size UoM Price Piece ¹ ₄", ³ ₈", ¹ ₂" Ea $ J H Williams Industrial Products Inc Drive Socket Tool Set 1/4, 3/8 & 1/2 Inch Drive - Fractional & Metric All tools are professional quality, made of high-grade chrome vanadium steel. Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener. Packed in rugged high-density polyethylene (HDPE) cases that are strong and durable yet light in weight. Case is shock proof at both high and low temperatures, equipped with heavy-duty metal latches and hinges. Two-component handles are easy to grip and comfortable to carry. 1/4" drive tools: Ratchet, 4" Extension, 8" Extension, 18" Sliding T-handle, Universal Joint, Hex Bit Holder, 13 Piece Insert Bit Set 3/8" drive tools: Ratchet, 3" Extension, 6" Extension, Universal Joint, Adaptor, Hex Bit Holder 1/2" drive tools: Ratchet, 6" Extension, 10" Extension, Universal Joint, Adaptor 1/4" drive deep sockets: 4mm-13mm, 5/32"-1/2" 1/4" drive shallow sockets: 4mm-13mm, 5/32"-1/2" 3/8" drive deep sockets: 10mm-19mm, 3/8"-7/8" 3/8" drive shallow sockets: 10mm-19mm, 3/8"-3/4" 1/2" drive shallow sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30, 32; 3 8", 7 16", 1 2", 9 16", 5 8", 11 16", 3 4", 13 16", 7 8", 15 16", 1", ", 1 1 8", ", 1 1 4" HNA# Part# Number in Set Drive Size UoM Price Piece ¹ ₄", ³ ₈", ¹ ₂" Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 25

28 J H Williams Industrial Products Inc Master Socket & Tool Set 1/4 & 3/8 Inch Drive - Fractional All tools are professional quality, made of high-grade chrome vanadium steel. Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener Packed in rugged high-density polyethylene (HDPE) cases that are strong and durable yet light in weight Case is shock proof at both high and low temperatures, equipped with heavy-duty metal latches and hinges Two-component handles are easy to grip and comfortable to carry Specifications 6-Point Shallow, 6-Point Deep, Hex Bit Sockets, Torx Bit Sockets, Screwdriver Bit Sockets Sockets: 6-Pt Shallow (1/4" Drive): 3/16, 7/32, 1/4, 9/ 32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 6-Pt Shallow (3/8" Drive): 3/8, 7/16, 1/2, 9/16, 5/8, 11/ 16, 3/4, 13/16, 7/8, 15/16, 1 6-Pt Deep (1/4" Drive): 3/16, 7/32, 1/4, 9/32, 5/16, 11/ 32, 3/8, 7/16, 1/2, 9/16 6-Pt Deep (3/8" Drive): 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 Hex Bit Sockets (SAE):þ1/8, 5/32, 3/16, 7/32, 1/4, 5/16, Hex Bit Sockets (mm): 3, 4, 5, 6, 7, 8, Screwdriver Bit Sockets (Slotted Tip): 5/32, 7/32, 9/32, Screwdriver Bit Sockets (Phillips Tip): #0, #1, #2, Torx Bit Sockets: T10, T15, T20, T25, T27, T30 12 point combination wrenches: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 Comfot grip screwdrivers: Slotted: 3/16" x 4", 1/4" x 4", Phillips: #1 x 3, #2 x 4 1/4" accessories: 36-Tooth Quick-Release Ratchet, 1-1/2" Extension, 3" Extension, Flex Handle, Spinner Handle, Universal Joint, 1/4" F x 3/8" M Adapter 3/8" accessories: 38-Tooth Quick-Release Ratchet, 3" Extension, 6" Extension, 10" Extension, 10" Flex Handle, Universal Joint, Sliding T-Handle, 3/8" F x 1/4" M Adapter, 3/8 F x 1/2" M Adapter HNA# Part# Number in Set Drive Size UoM Price J Piece ¹ ₄", ³ ₈" Ea $ J H Williams Industrial Products Inc Drive Master Tool Set 86 Piece - 1/4 & 3/8 Inch Drive - Fractional & Metric All tools are professional quality, made of high-grade chrome vanadium steel. Sockets feature SUPERTORQUE lobular openings for greater turning power without deforming the fastener. Packed in rugged high-density polyethylene (HDPE) cases that are strong and durable yet light in weight. Case is shock proof at both high and low temperatures, equipped with heavy-duty metal latches and hinges. Two-component handles are easy to grip and comfortable to carry. 1/4" Drive Tools: 36 Tooth Quick-Release Ratchet, 1-1 2" Extension, 3" Extension, Flex Handle, Spinner Handle Universal Joint, 1 4" F x 3 8" M Adapter 3/8" Drive Tools: 38 Tooth Quick-Release Ratchet, 3" Extension, 6" Extension, 10" Extension, 10" Flex Handle, Universal Joint, Sliding T-Handle, 3 8" F x 1 4" M Adapter, 3 8" F x 1 2" M Adapter 1/4" Drive Shallow 6-Point Sockets: 4mm-14mm 3/8" Drive Shallow 6-Point Sockets: 8mm-19mm 3/8" Drive Deep 12-Point Sockets: 8mm-19mm 1/4" Drive Hex Bit Sockets: 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" 1/4" Drive Hex Bit Sockets: 3mm-8mm 1/4" Drive Screwdriver Bit Sockets: 5 32" Slotted Tip, 7 32" Slotted Tip, 9 32" Slotted Tip, #0 Phillips Tip, #1 Phillips Tip, #2 Phillips Tip 1/4" Drive Torx Bit Sockets: T10, T15, T20, T25, T27, T30 Comfort Grip Screwdrivers: 3 16" x 4" Slotte, 1 4" x 4" Slotted, #1 x 3" Phillips, #2 x 4" Phillips 12 Point Combination Wrenches: 6mm, 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm HNA# Part# Number in Set Drive Size UoM Price Z Piece ¹ ₄", ³ ₈" Ea $ J H Williams Industrial Products Inc 6 Point Rugged-Case-System Tool Set 36 Piece - 1/4 Inch Drive - Metric 1/4" Drive Torx Bit Socket: T10, T15, T20, T25, T27, T30 3/8" Drive Torx Bit Socket: T40, T45, T47, T50 3/8" Drive Hex Bit Socket: 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm 3/8" Drive Slotted Socket: 1/4, 5/16, 3/8, 3/16 3/8" Drive Phillips Socket: #1, # 2, #3 3/8" Drive Hex Bit Socket: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" HNA# Part# Drive UoM Price Size TB ¹ ₄" Ea $61.68 PROTO Combination Wrench Set Fractional - 15 Pieces - 12 Point Set Includes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4" Satin finish Fractional sizes 11/32 and smaller do not have the ASD feature Anti-Slip Design (ASD) open end Locking grooves help prevent the wrench from slipping off the fastener when turning Loads are kept off the corners of the fastener which helps prevent fastener rounding Box ends incorporate the Torque- Plus system TorquePlus wrenches are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials The TorquePlus design is a high performance drive configuration which allows for quick and easy wrench engagement to the fastener flats, not the corners Tool Roll HNA# Part# Number in Set Size Range UoM Price J1200FASD 15 Piece ⁵ ₁₆"-1¹ ₄" Ea $ PROTO Combination Wrench Set 12 Point Metric - TorquePlus The box end of Proto flat wrenches incorporates the TorquePlus wrenching system. This high performance design allows the wrench to contact the fastener away form the corner while also dispersing stress over a larger area. All Proto flat wrenches are forged from special alloy steel for unequaled strength and durability Set includes: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, and kit HNA# Part# UoM Price F-M Ea $ PROTO Adjustable Wrench Set Cushion Grip - Chrome Finish Soft cushion grip for additional comfort. Extra wide jaw capacity. Square jaw opening provides strength and tight fit. HNA# Part# Set Includes UoM Price AM0484 J795G 8", 10", 12" Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

29 Bahco Adjustable Wrenches Chrome Finish Ergo Bahco Adjustable Wrenches Ergo adjustable wrenches are designed according to Bahco's scientific 11-step ergonomic design program. Features: True ergo design, with thermoplastic handle and larger grip width Ideal for plumbers, electricians, and maintenance workers Slim head with tapered jaws combine easy accessibility with extra turning strength Precision hardened and anticorrosion treated Measurement scale on head conveniently shows fastener size HNA# Part# Lgth Bahco Adjustable Wrenches Black Phosphate Finish Ergo Ergo adjustable wrenches are designed according to Bahco's scientific 11-step ergonomic design program. Features: True ergo design, with thermoplastic handle and larger grip width Ideal for plumbers, electricians, and maintenance workers Slim head with tapered jaws combine easy accessibility with extra turning strength Precision hardened and anti-corrosion treated Measurement scale on head conveniently shows fastener size Bahco Adjustable Wrenches Jaw Cap. Head Thickness Jaw Tip Thickness UoM Price C RC US 6" ³ ₄" ⁷ ₁₆" ³ ₁₆" Ea $23.86 E RC US 8" 1¹ ₁₆" ¹ ₂" ¹ ₄" Ea $22.94 C RC US 10" 1³ ₁₆" ⁵ ₈" ⁵ ₁₇" Ea $30.90 C RC US 12" 1⁵ ₁₆" ¹¹ ₁₆" ⁷ ₈" Ea $37.79 HNA# Part# Lgth Jaw Cap. Head Thickness Jaw Tip Thickness UoM Price C R US 6" ³ ₄" ⁷ ₁₆" ³ ₁₆" Ea $20.28 C R US 8" 1¹ ₁₆" ¹ ₂" ¹ ₄" Ea $21.30 C R US 10" 1³ ₁₆" ⁵ ₈" ⁵ ₁₇" Ea $26.23 C R US 12" 1⁵ ₁₆" ¹¹ ₁₆" ⁷ ₈" Ea $33.26 Adjustable wrenches with industrial grade steel handles. Features: Slim head with tapered jaws combine easy accessibility with extra turning strength Measurement scale on head conveniently shows fastener size (except for 24" and 30" wrenches) Precision hardened and anti-corrosion treated HNA# Part# Lgth PROTO Combination Screwdriver Set Slotted - Phillips - 8 Pieces DURATEK Ergonomic quad-lobe handle design with 360 texture for additional grip. Kit Contents: SLOTTED CABINET ROUND BAR - 3/16" X 3" SLOTTED CABINET ROUND BAR - 3/16" X 4" SLOTTED CABINET ROUND BAR - 3/16" X 5" SLOTTED KEYSTONE ROUND BAR - 1/4" X 4" SLOTTED KEYSTONE ROUND BAR - 5/16" X 6" PHILLIPS ROUND - #1 X 3" PHILLIPS ROUND - #2 X 4" PHILLIPS ROUND - #3 X 6" Channellock Tongue & Groove Pliers Blue Comfort Grips Jaw Cap. Head Thickness Jaw Tip Thickness UoM Price C R US 4" ¹ ₂" ³ ₈" ¹ ₈" Ea $14.49 C R US 6" ³ ₄" ⁷ ₁₆" ³ ₈" Ea $16.59 C R US 8" 1¹ ₁₆" ¹ ₂" ¹ ₄" Ea $17.58 C R US 10" 1¹ ₈" ⁵ ₈" ⁵ ₁₆" Ea $21.50 C R US 12" 1⁵ ₁₆" ¹¹ ₁₆" ⁷ ₁₆" Ea $29.25 C R US 15" 1¹¹ ₁₆" ¹³ ₁₆" ⁹ ₁₆" Ea $47.19 C R US 18" 2¹ ₁₆" ⁷ ₈" ¹¹ ₁₆" Ea $65.82 HNA# Part# Number in Set UoM Price AG0722 J1208SC 8 Piece Ea $69.79 Adjustable wrenches with industrial grade steel handles. Features: Slim head with tapered jaws combine easy accessibility with extra turning strength Measurement scale on head conveniently shows fastener size (except for 24" and 30" wrenches) Precision hardened and anticorrosion treated HNA# Part# Lgth Jaw Cap. Head Thickness Jaw Tip Thickness UoM Price C RC US 4" ¹ ₂" ³ ₈" ¹ ₈" Ea $18.62 H RC US 6" ³ ₄" ⁷ ₁₆" ³ ₈" Ea $19.50 C RC US 8" 1¹ ₁₆" ¹ ₂" ¹ ₄" Ea $20.63 C RC US 10" 1¹ ₈" ⁵ ₈" ⁵ ₁₆" Ea $25.30 C RC US 12" 1⁵ ₁₆" ¹¹ ₁₆" ⁷ ₁₆" Ea $36.38 C RC US 15" 1¹¹ ₁₆" ¹³ ₁₆" ⁹ ₁₆" Ea $64.56 C RC US 18" 2¹ ₁₆" ⁷ ₈" ¹¹ ₁₆" Ea $ Lower jaw combines with expanded reinforcing rib to prevent handles from contacting each other. CHANNELLOCK uses high-carbon C1080 steel for superior performance on the job and specially coated for ultimate rust prevention Patented reinforcing edge minimizes stress breakage Undercut tongue & groove design won't slip Right-angle, laser-heat treated teeth grip better and last longer PermaLock fastener eliminates nut and bolt failure CHANNELLOCK BLUE grips for comfort Made in the USA HNA# Part# Length Jaw Capacity Adjustment Head Style UoM Price ¹ ₂" ¹ ₂" 3 Straight Ea $ ¹ ₂" 1¹ ₂" 5 Straight Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 27

30 Channellock Long Nose Pliers Blue Comfort Grips Also features a side cutter Laser heat-treated cutting edges last longer Crosshatch pattern on jaws grips work tightly Features a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life CHANNELLOCK uses high-carbon C1080 steel for superior performance on the job and specially coated for ultimate rust prevention CHANNELLOCK BLUE grips for comfort Made in the USA HNA# Part# UoM Price Bulk Ea $26.02 Irwin Industrial Tools Ergomulti Long Nose Pliers With Wire Stripper & Wire Crimper Vise-Grip 62 Ergonomic angled head for reduced wrist strain Induction-hardened cutting edges cut ACSR, nails, screws and even piano wire Three-zone comfort grips are contoured for optimal cushion and control Backed by the IRWIN Lifetime Guarantee Integrated handle hooks equipped for Performance Lanyard system for safer elevated working conditions and easier retrieval when stored Specially coated for superior rust-resistance and longer tool life Built-in spanner for turning screws, nuts and grounding rods Jaw Jaw Jaw HNA# Part# Length Length Width Thickness UoM Price E " 2" 1¹ ₈" ⁷ ₁₆" Ea $49.25 Irwin Industrial Tools Integrated Performance Lanyard System With Clip Vise-Grip Patented integrated fastening system designed exclusively for use with specially-equipped IRWIN VISE-GRIP pliers Work safer by attaching clip to pliers handle to help prevent accidental drops when working in elevated conditions Lanyard allows the user to find the right tool faster when stored in a crowded toolbox HNA# Part# UoM Price E Ea $6.25 Channellock Box Joint Diagonal Cutting Pliers Blue Comfort Grips Box joint diagonal Laser heat-treated cutting edges last longer Only CHANNELLOCK uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life CHANNELLOCK uses a highcarbon C1080 steel for superior performance on the job and specially coated for ultimate rust prevention CHANNELLOCK BLUE grips for comfort Common Specifictions: Handle span: 1.89 Made in the USA HNA# Part# Length Jaw Length Joint Width Joint Thickness Cutting Edge UoM Price Bulk 6" 0.85" 0.81" 0.43" 0.85" Ea $19.37 Irwin Industrial Tools Diagonal Cutting Pliers With PowerSlot - Max Leverage Vise-Grip PowerSlot* Technology provides 2X more power and half the cutting effort Induction-hardened cutting edges cut ACSR, nails, screws and even piano wire Three-zone comfort grips are contoured for optimal cushion and control Backed by the IRWIN Lifetime Guarantee Integrated handle hooks equipped for Performance Lanyard system for safer elevated working conditions and easier retrieval when stored Specially coated for superior rust-resistance and longer tool life HNA# Part# Length Channellock Welder's Pliers Used for installation and removal of bushings and nozzle, spring loaded for ease of use Groove Nose design for superior spatter removal; easy tip installation and removal; grips and draws out wire; able to hammer Precision machined laser heat-treated cutting edges for clean cuts XLT Xtreme Leverage Technology means considerably less force required to cut than traditional high leverage Features a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life CHANNELLOCK uses high-carbon C1080 steel for superior performance on the job and specially coated for ultimate rust prevention CHANNELLOCK BLUE grips for comfort Made in the USA Channellock Slip Joint Pliers With Side Cutters Slip Joint Plier with a fine side cutter PermaLock fastener eliminates nut and bolt failure Crosshatch pattern on jaws grips work tightly CHANNELLOCK uses highcarbon C1080 steel for superior performance on the job and specially coated for ultimate rust prevention CHANNELLOCK BLUE grips for comfort Made in the USA Channellock 9.5 Inch Cable Cutters Channellock Blue Comfort Grips Jaw Length Jaw Width Jaw Thickness UoM Price E " ⁷ ₈" 1¹ ₈" ¹ ₂" Ea $43.86 HNA# Part# Length Jaw Length Joint Width Joint Thickness Cutting Edge UoM Price " 2.71" 1.5" 0.45" 0.39 Ea $29.73 HNA# Part# Length UoM Price " Ea $38.79 Cuts up to 4/0 aluminum and 2/0 copper Not for steel or ACSR Laser heat-treated cutting edges last longer Only CHANNELLOCK uses a knife and anvil style cutting edge to ensure perfect mating and superior cutting edge life CHANNELLOCK uses a high-carbon C1080 steel for superior performance on the job and specially coated for ultimate rust prevention CHANNELLOCK BLUE grips for comfort Made in the USA HNA# Part# Length Cutting Capacity UoM Price F " 4/0 aluminum and 2/0 copper Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

31 H K Porter Bolt Cutter Center Cut General plant maintenance tool Drop-forged, precision ground, alloy tool steel jaws with center-cut blades Cuts soft, medium, or hard materials Maximum hardness of material to be cut: Brinell 455/Rockwell C48 Lockplate keeps jaws from loosening Toggle joints turn 50 lbs. hand pressure to 4000 lbs cutting pressure Screw-type adjustment realigns edges Steel handles with rubber grips HNA# Part# Length Cutting Capacity UoM Price MC 24" ⁷ ₁₆" Brinell 455/Rockwell C48 Ea $ MC 30" ¹ ₂" Brinell 455/Rockwell C48 Ea $ MC 36" ⁹ ₁₆" Brinell 455/Rockwell C48 Ea $ Leatherman Tool Group, Inc. Combination Multipurpose Tools Super Tool The Super Tool is the biggest, strongest multi-purpose tool in our line It is designed with the features our customers have asked for, including a saw, a serrated knife blade and a wire stripper But most innovative of all is the unique locking mechanism which prevents tool blades from folding during use This is the strongest, most precise locking mechanism found on any multi-purpose tool Its heavy-duty capabilities make the Super Tool especially useful for the professional user, but anyone who needs the extra safety of ten locking blades will be glad to have this workhorse at their fingertips The Super Tool has a closed length of 4.5 and weighs nine ounces It is 100% stainless steel and available in our standard brush finish or with a black oxide coating A cap crimper option, popular among military and law enforcement personnel, is also available It is offered in box or clamshell packaging There are several sheath options to choose from Specifications: Needlenose pliers; Regular pliers; Wire cutters; Hard-wire cutters; Clip-point knife; Serrated knife; Wood saw; Metal/wood file; 9 inch/22 cm ruler; Can/bottle opener; Extra-small screwdriver; Medium screwdriver; Large screwdriver; Phillips screwdriver; Electrical crimper; Wire stripper; Awl/punch HNA# Part# Finish UoM Price R Standard Ea $83.41 Leatherman Tool Group, Inc. Combination Multipurpose Tools 14-1 Wingman The Leatherman Wingman is just that: your go-to tool for projects around the house, on the job, or at the campsite. A great, lightweight, pocket-sized, stainless steel tool; the Wingman features an outside-accessible, one-hand opening blade and newly-designed spring-action jaws. With plenty of handy tools, and backed by a team of designers, assemblers, and manufacturing crew from Portland, Oregon, this is one amazing value. Covered by the Leatherman 25-year warranty. Spring-action Needlenose Pliers Spring-action Regular Pliers Spring-action Wire Cutters 420HC Combo Knife Package Opener, Wood/Metal File Spring-action Scissors Small Screwdriver, Medium Screwdriver Phillips Screwdriver Ruler (1.5 in / 3.8 cm), Bottle Opener Can Opener, Wire Stripper Replaceable Pocket Clip Stainless Steel 25-year Warranty One-hand Operable Features, Outside-accessible Features Integrated Lanyard Attachements 2.6 in, 6.6 cm (Blade Length), 3.8 in, 9.7 cm (Closed), 7 oz, g (Weight) HNA# Part# Description UoM Price U Multi-Tool Ea $38.04 Lufkin Power Return Tape Measures Hi-Viz Orange P1000 series Hi-Viz Orange Case - Easy to Find on the Job Rubber Cushion Case Exterior Protects Tape From Impact and Improves Grip Fits Easily Into Most Tape Holsters Bright Yellow Blade Has Clear Easy-To-Read Numerals Toggle Lock is Positioned for Convenient Operation Holds the Blade Securely in Any Position Cushioned Blade Return Removable Belt Clip Blade Style A1: Black and red markings one side only. Graduated feet and inches to 1/16ths top edge. Graduated inches to 1/16ths bottom edge and first 12 inches to 1/32nds. Quick foot readings. Stud marks every 16. Blade Style A2: Black and red markings one side only. Graduated feet and inches to 1/16ths top edge. Graduated inches to 1/16ths bottom edge and first 12 inches to 1/ 32nds. Quick foot readings. Stud marks every 16. Blade Style A4: Graduated feet, 1/10ths and 1/100ths top edge; feet, inches and 1/16ths on bottom edge. Quick foot readings. 3/4 has black markings only. Stud marks every 16 Blade Style A5: Black and red markings one side only. Inches to 16ths. Stud marks every 16. Truss marks every Quick foot readings. Blade Style A9: Black and red markings one side only. Both edges graduated to millimeters; numbered consecutive centimeters with larger red numbers at each decimeter. Blade Style A13: Black and red markings one side only. Top edge to 1/16ths, continuous inches; feet and decimeters marked in red. Bottom edge graduated to millimeters, numbered consecutive centimeters. Blade Style A30: Markings one side only. English top edge to 1/16ths, first 12 to 1/32nds, (continuous inches plus consecutive inch marks within each foot from 1 mark). Truss marks every Metric bottom edge graduated to millimeters, numbered consecutive centimeters. HNA# Part# Blade Width Blade Length Blade Style Replacement Blade UoM Price W65926 PHV1010 ¹ ₂" 10' A1 RY210 Ea $6.56 W65927 PHV1012 ¹ ₂" 12' A1 RY212 Ea $8.01 W65934 PHV1035CME ³ ₄" (19mm) 16' (5m) A13 - Ea $11.45 W65936 PHV1048CME 1" (25mm) 26' (8m) A30 - Ea $14.84 W65942 PHV1425 1" 25' A5 RY425 Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 29

32 Apex Tool Group U-Guard Extensions U-Guard Extensions HNA# Part# Drive Size Drive Type Sex Length Socket End Drive Size Socket End Type Socket End Sex Assembly UoM Price Z05023 UG-EX ¹ ₄" Hex M 4 ¹ ₄ Square M FS Ea $62.78 J55913 UG-EX ¹ ₄" Hex M 3 ³ ₈ Square M FS Ea $77.05 J93940 UG-EX ³ ₈" Square F 3 ³ ₈ Square M FS Ea $90.70 J55915 UG-EX ³ ₈" Square F 4 ³ ₈ Square M FS Ea $88.48 I89342 UG-EX ³ ₈" Square F 5 ³ ₈ Square M FS Ea $86.25 Z05036 UG-EX ³ ₈" Square F 6 ³ ₈ Square M FS Ea $96.52 GearWrench Indexible Pry Bar Extendable Exceeds ANSI requirements for proven strength Indexible to over 180 degrees for greater leverage 14 locking positions for unmatched access Grooved foot for added traction AccuTec Blades Extra Keen Single Edge Razor Blades.009" - High Carbon - Aluminum Back American Line HNA# Part# Length UoM Price T "-29" Ea $ AccuTec Blades #11 Hobby Knife Blades Each blade protected in shelling paper. Triple facet edge HNA# Part# Pkg. Qty. UoM Price J Blades Bx $5.55 AccuTec Blades Single Edge Razor Blades American Line High carbon steel Precision acute point Fits all standard handles HNA# Part# Pkg. Qty. UoM Price Blades Bx $12.68 AccuTec Blades Aluminum Back Safety Edge Blades.009" - 3 Facet - Dispenser HNA# Part# Thickness Pkg. Qty. UoM Price W DISP.009" 100 Blades Ea $16.00 AccuTec Blades Heavy Duty Utility Knife Blades 3 Facet Blade Aluminum Back Uncoated Dispenser pushes blades out, backing first, for safety On board used blade storage HNA# Part# Pkg. Qty. UoM Price Blades Ea $ Notch.025 inch Heavy Duty HNA# Part# Thickness Pkg. Qty. UoM Price Q " 5 Blades Bx $ PRODUCTS ARE SUBJECT TO AVAILABILITY

33 Kennedy 7 Drawer Mobile Cabinets 27 & 29 Inch Widths Kennedy Bench Stands Toolkart Ships directly from the manufacturer. Ships directly from the manufacturer HNA# Part# Size Color Description UoM Price S XB 29"W x 20"D x 35"H Brown 7- Drawer Roller Cabinet with Ball- Bearing Slides Ea $ HNA# Part# Capacity Color UoM Price TB IG 40lb Green Ea $ TB UB 40lb Blue Ea $ TB IG 50lb Green Ea $ TB UB 50lb Blue Ea $ Kennedy Service / Utility Carts Toolkart Kennedy Ball-Bearing Slides 7-Drawer Industrial Series Slide carrier channels are slotted at 2" increments to allow the maximum drawer configuration Three member, full ball-bearing slides with four levels of ball bearings permit effortless, feather-light movement even though drawers are fully loaded Self-cleaning bridged retainers prevent dirt from building up and keep drawers operating smoothly for years under the heaviest loads Model 297X have snap-in ball bearing drawer slides. Drawers, Width, Depth, Height: 3, 25 in., 18 1/2 in. 2 in. 3, 25 in., 18 1/2 in. 4 in. 1, 25 in., 18 1/2 in. 6 in. Drawers: 7, Width: 29 in., Depth: 20 in., Height: 35 in., Ship Weight: 165 lbs. Ships directly from the manufacturer HNA# Part# Wt UoM Price TB XRED 153 Ea $ Kennedy Modular Roller Cabinet 29 Inch Width - Blue Finish HMS Series Our Hybrid Modular System combines the economy of roller cabinet construction with modular cabinet features. Compact, highdensity storage that saves space while it organizes parts, tools and supplies. Cabinets are stackable, can be fork-lifted or used as work stations. Cabinets can also be used as work station base cabinets, using two cabinets to support work surface or one cabinet with adjustable work station leg. 16 gauge body 18 gauge drawers Ships directly from the manufacturer HNA# Part# Size Dimensions Color Cap. UoM Price TB UB 5-Drawer 29"x20"x33¹ ₂" Blue 920lbs Ea $1, TB UB 6-Drawer 29"x20"x33¹ ₂" Blue 960lbs Ea $1, TB UB 7-Drawer 29"x20"x33¹ ₂" Blue 910lbs Ea $1, Ships directly from the manufacturer HNA# Part# Capacity Color UoM Price TB IG 40lb Green Ea $1, TB UB 40lb Blue Ea $1, TB IG 50lb Green Ea $1, TB UB 50lb Blue Ea $1, Kennedy Four Panel Kit The standard set consists of four 18 x 36" panels (covers 18 sq. ft. of wall space). 60-piece toolholder set included. Ships directly from the manufacturer Tan HNA# Part# UoM Price TB Ea $ Kennedy 4 Panel Steel Tooth Toolboard 120 Pound Capacity Four 18 x 36 Steel Toolboard Panels Set Covers 18 sq.ft. Of Wall Space 60-pc Toolholder Hook Set Tan (blue shown) Ships directly from the manufacturer. HNA# Part# Size UoM Price TB UGY 18"x¹ ₂"x36" Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 31

34 PROTO Open Tote Tool Bag Durable 1,200 x 1,200 denier fabric. Rigid and waterproof plastic bottom. Ergonomically designed leather handle. 14 Internal storage loops for maximum organization. Special storage partition for 12 screwdrivers. 10 External storage pockets. Adjustable saw compartment with self-adhesive strips. Weather flap protects tools and conveniently tucks away.s. 14 1/2" high x 9 1/2" deep HNA# Part# UoM Price C85874 J120TB Ea $83.71 PROTO Backpack With Removable Tote Durable 1,200 x 1,200 denier fabric. Rigid and waterproof plastic bottom. Ergonomically designed padded straps and back support provide comfort and durability. Internal storage compartments for maximum organization. Convenient laptop storage included. Quick carry tool pouch included for easy transport of commonly used tools. 18" high x 11" deep. HNA# Part# UoM Price C85872 J114BP Ea $94.52 Milwaukee Electric Tool Jobsite Backpack The Milwaukee Jobsite Backpack was designed with the professional tradesmen in mind and built with durable 1680 denier material and an impact and water resistant molded base. The Jobsite Backpack features a padded, breathable load bearing harness for ultimate comfort and jobsite performance, as well as a laptop pocket for the protected storage of laptops and tablets. A fold-down front pocket allows for easy storage of large items such as fish tapes, drills and extension cords, while exterior daisy chains allow for additional clip-on storage. This combination of extreme durability and functionality confirms Milwaukee s commitment to providing innovative, durable solutions to the end user. HNA# Part# UoM Price AT Ea $ Loctite SF 7900 Ceramic Shield for Welding Loctite SF 7900TM Ceramic Shield for Welding is the innovative ceramic protective coating for welding. This unique dry film effectively protects welding equipment against metal spatter up to eight hours, without the need for reapplication. Frequent cleaning of the equipment is no longer necessary and, with downtime being eliminated, costs are reduced and productivity is enhanced. KEY BENEFITS Increase productivity by up to 7% Reduce running costs for consumables by up to 40% Eliminate costs for cleaning equipment PRODUCT PROPERTIES AND ADVANTAGES Ceramic, silicone-free protective coating Spray coating dries within seconds, Easy to apply Excellent adhesion of coating Protects contact tips, welding nozzles and jigs Costs of the protective coating only a few cents per shift Prevents adhesion of welding spatter for up to eight hours with just one application APPLICATIONS Manual MIG / MAG Welding At the beginning of the shift, Loctite SF 7900TM is sprayed once onto the equipment surface. The resulting ceramic coating repels spatter and ensures uninterrupted welding. HIGHER PRODUCTIVITY Welding spatter does not adhere to contact tips or shrouds Eliminates the need for continuous contactable cleaning Reliable, uninterrupted work processes without downtime LOWER COSTS Physical and thermal protection for welding equipment Service life of welding equipment increased by four to five times Significant savings on welding consumables CLEANER WELDING Shroud remains free of spatter gas flow is not interrupted Higher quality welding seam Work pieces can also be coated and protected from spatter Laser and Plasma Cutting Laser and plasma cutting nozzles are particularly sensitive to spatter. Loctite SF 7900 offers protection without impairing machine operation. HIGHER PRODUCTIVITY More reliable, continuous production Less downtime for cleaning LOWER COSTS Physical and thermal protection for shrouds Service life of shrouds extended by four to five times Cost savings on consumables, Jigs, Fixtures and Fittings A single coat of Loctite SF 7900TM protects jigs, fixtures and fittings against adhering spatter for up to one week, as well as power cables, sensors, metal components and the jaws of spot welding systems. REDUCE COSTS AND BOOST PRODUCTIVITY Spatter does not adhere to coated surfaces No surface cleaning required spatter can be swept up with soft brush Time previously consumed by manual spatter removal can be devoted to production No need for expensive cleaning chemicals HNA# Part# Size Color UoM Price oz. White Ea $34.61 Loctite 290 Threadlocker Wicking Grade/Medium to High Strength Wicking grade threadlocker for preassembled bolts up to 1/2 (12mm). Penetrates threads by capillary action; simplifies preventive maintenance. Secures set screws and other assemblies after settings are completed. Used to seal welds and porous metal parts. Protects threads from rust and corrosion. Localized heating and hand tools are needed for disassembly..004 optimum gap fill, -65 to 300 F temperature range Fixture in 20 minutes, full cure in 24 hours Recommended primers: Loctite 7088, N, T, Torque: Break 90 in/lbs, prevail 260 in/lbs Color: Green HNA# Part# Color Size UoM Price Green 50ml Bottle Ea $ Green 250ml Bottle Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

35 Simple Green Anti Spatter Simple Green Extreme Aircraft & Precision Cleaner The easy solution to protect your welding equipment and projects from unwanted spatter. Non-Flammable, No Silicone, Non-Corrosive Plating and painting safe Readily biodegradable Made in the USA HNA# Part# Size UoM Price TB oz Spray Ea $7.82 TB gal Ea $14.46 Simple Green Crystal Cleaner Degreaser Water Based Concentrate Crystal Simple Green Industrial Cleaner and Degreaser is a powerful, industrialstrength cleaner and degreaser formulated for critical cleaning applications that demand high performance from a fragrance and colorfree solution. This highly-trusted cleaner utilizes an orally non-toxic, nonflammable and biodegradable formula, making it the ideal cleaning solution for a variety of industries where sanitation and safety are of equal concern. Clean-rinsing, concentrated and cost-effective, Crystal Simple Green is the sound choice for food processing & handling, industrial, manufacturing, electronics and parts washing industries, cutting through tough grease, oils, built-up grime and other residue without harsh or volatile chemicals. The formula is NSF labeled A1, A2, A4, A8, B1 and C1 for use in commercial kitchens, food processing plants and other areas where food is prepared or handled. EPA exempt from special handling and personal protection requirements, Crystal Simple Green is a safer alternative to caustic cleaners and solvents. HNA# Part# Size Wt UoM Price gal 9.33 Ea $ gal 46 Ea $82.27 Simple Green Cleaner Degreaser Deodorizer Water Based Concentrate A powerful all-purpose cleaner and degreaser that provides a safer alternative to toxic cleaners, bleaches & solvents. The trusted formula is non-toxic, non-abrasive and non-corrosive. Safe for all washable surfaces, Simple Green can be used to remove heavy dirt, grease, food residue and stains from any washable surface including countertops, sinks, tile, carpet, flooring, upholstery and more. The cost-effective concentrate can be used manually or in cleaning equipment such as such as floor scrubbers, dip tanks, carpet extractors, pressure washers, parts washers, steam extractors and foamers. It easily cut through tough grease, oils, cutting fluids, built-up grime and residue on equipment, engines, machinery, vehicles and manufactured parts making it ideal for a wide range of industries including janitorial, manufacturing, MRO, food processing, mining, automotive, transportation and engineering. HNA# Part# Size Wt UoM Price gal 9.33 Ea $ gal 46 Ea $72.40 Extreme Simple Green Aircraft and Precision Cleaner's breakthrough formula cleans and degreases without corrosive chemicals. Its combined high soil capacity, superior grease-cutting ability and clean rinsing formula prevents redeposition of soils, ensuring fast, effective and high precision cleaning. The non-corrosive formula is safe for use on aluminum, carbon fiber, high tech alloys, structural metals, paints, protective coatings and more. It contains no reagents that oxidize finishes, cause rust within the fluid or degrade plastics making it ideal for maintaining structural metals, hoses, seals and factory finishes. HNA# Part# Size UoM Price J gal Ea $22.23 J gal Ea $94.76 Simple Green Foaming Crystal Cleaner / Degreaser Foaming Crystal Simple Green Industrial Cleaner & Degreaser brings the effective cleaning power of Crystal Simple Green Industrial Cleaner & Degreaser to hard-to-reach areas. The specialized foaming formula clings to vertical and hard-to-clean surfaces enabling controlled application and longer contact time on soiled areas. The foaming action provides some agitation of the Crystal Simple Green formula in areas where agitation would otherwise be impossible. The non-toxic formula is non-abrasive, non-flammable and biodegradable. The noncorrosive cleaner is safe to use on metals, finishes, plastic & rubber. The fragrance-free and color-free solution is clean rinsing making it ideal for critical cleaning applications across a variety of industries. NSF registered A1, A4, A8, C1. HNA# Part# Size Wt UoM Price TB oz Aerosol 1.5 Ea $4.61 Simple Green Cleaner Degreaser Towels Multi-Purpose Simple Green Safety Towels are larger-sized wipes for heavyduty, multi-purpose cleaning. They are pre-moistened with Crystal Simple Green, a powerful cleaner and degreaser that is both non-toxic and biodegradable. The durable, dual-sided wipes feature a scouring side for tough scrubbing and a smooth side for a non-abrasive, lint-free shine. The wipes feature excellent wicking and fluid holding capacity for cleaning liquid spills and are thermally bonded and meltblown to ensure durability and resistance to rot and mildew. Easily remove grease, oil, food spills, wet paint, carbon, graphite, tar, soot, grime, most inks and more. They are safe for use on all washable surfaces including metals, concrete, rubber, finished wood, tile, laminates, concrete, stone, porcelain, carpets and other industrial surfaces. The cleaning solution contains no added color or scent and is NSF registered for use in food processing facilities and commercial kitchens. HNA# Part# Wt UoM Price Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 33

36 Kimberly-Clark Professional Waterless Cleaning Wipes WypAll* Tough scrubbing power wherever you need it! Take them with you to outdoor sites or to jobs without clean facilities. On the truck or on the go, get clean. Don t leave work without them. Dual textured, smooth side and rough side Advanced cleaning agent efficiently breaks down and dissolves stubborn dirt and grease Aids in moisturizing skin Kimberly-Clark Professional L30 Wipers WypAll* HNA# Part# Size UoM Price "x12" Bucket Ea $13.56 J "x12" Canister Ea $9.61 Kimberly-Clark Professional X80 Wipers WypAll* Softer and more absorbent than ever before Available in a wide range dispensing options for your convenience Consistent size, shape, and cleanliness Pound for pound, absorbs more water and oil than rental shop towels Ideal for general purpose Light-duty cleanups Remove soils and liquids from face and hands One-at-a-time dispensing for users on the go HNA# Part# Size Color Description Pkg. Qty. UoM Price B "x13.3" White Jumbo Roll Roll-950 Wipers Rl $ "x9.8" White Pop-Up* Box Case-720 Wipers Ca $56.34 Case- E "x12" White Quarterfold 1080 Wipers Ca $51.69 Kimberly-Clark Professional X50 Wipers WypAll* HNA# Part# Size Color Desc. Pkg. Qty. UoM Price V "x13.4" Red Jumbo Roll Roll-475 Wipers Rl $67.40 G "x13.4" Blue Jumbo Roll Roll-475 Wipers Ca $ "x13.4" White Jumbo Roll Roll-475 Wipers Ca $69.50 G "x16.8" White BRAG* Box Box-160 Wipers Ca $31.34 G "x16.8" Blue BRAG* Box Box-160 Wipers Ca $31.34 Pop "x16.8" Red Up* Case-400 Wipers Bx $16.35 Box "x16.8" White Pop- Up* Box Case-400 Wipers Bx $15.72 Rust-Oleum Write-On Paint Clear Rust-Oleum Write-On Paint allows you to turn any wall into a writable-erasable surface. Write- On Paint lets you create an area to create, express and explore your ideas. The product is ideal for offices, conference rooms, schools, industrial work stations and more. Dries clear; can be applied over existing paint for a custom look Dries in as little as 4 hours; writable in 3 days Compatible with standard dry erase markers and cleaners Quick and easy application Features patented burst-pouch technology for no-mess mixing <100 VOC formula Use a fine grit sandpaper to remove any rough spots before applying Write-On Paint HNA# Part# Size Color Description UoM Price TB oz Kit Clear Covers 100 Sq. Ft. Ea $ TB oz Kit Clear Covers 50 Sq. Ft. Ea $ Our most economical extended-use wiper picks up where the competition falls apart. WypAll* X50 Wipers combine versatile performance with economical design for lightduty tasks. Ideal for manufacturing, healthcare and transportation environments. HNA# Part# Size Color Pkg. Qty. UoM Price G " x 13.4" White Jumbo Roll Rl $53.85 J " x 12.5" White Pop-Up* Box Bx $8.30 Rust-Oleum Anti-Slip Floor Coatings Single Component Epoxy AS5400 System A single-component epoxy-based anti-slip floor coating This coating is designed for use on concrete floors, aisles, walkways, stairs, areas around machinery, or doorways subject to heavy foot or light vehicle traffic, where a coarse anti-slip safety finish is desired. It may also be used on metal stairs or other metal surfaces where safety is a concern. Its ridged profile offers aggressive anti-slip characteristics in a onecomponent, one-step application. Apply Rust-oleum anti-slip coatings anywhere safety is a concern For best performance, apply with a phenolic no nap' roller cover Grade: pedestrian Anti-slip with premixed aggregate, epoxy ester for easy one-step application Use on clean concrete or metal (when primed with 9100 system) Apply to areas that experience heavy foot-/light vehicle traffic where safety is a concern Convenient, one-step application. Not for sale in CA or HI. HNA# Part# Color Size Wt UoM Price AS Safety Yellow 1gal 14.5 Ea $ AS Black 1gal 14.5 Ea $ AS Silver Gray 1gal 14.5 Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

37 Rust-Oleum Fiberglass Anti-Slip Step Covers Medium Grit SafeStep Heavy duty preformed anti-slip step cover providing a corrosion resistant surface for damaged, worn or slippery steps. Virtually indestructible Excellent chemical and corrosion resistance Extremely durable- for pedestrian, vehicle and forklift traffic Available in course and medium grit textures Black/yellow HNA# Part# Size UoM Price TB "x10" Ea $69.34 TB "x10" Ea $76.63 Rust-Oleum Fiberglass Anti-Slip Step Edge Covers Medium Grit SafeStep Heavy duty preformed anti-slip step edges providing a protective cover for damaged, worn or slippery step edges. Virtually indestructible Excellent chemical and corrosion resistance Extremely durable indoors or outdoors Available in coarse and medium grit textures Yellow HNA# Part# Size UoM Price TB "x2.75" Ea $26.29 TB "x2.75" Ea $28.86 Rust-Oleum Paint Marking Device SpraySmart The SpraySmart system is a reusable marking paint system that uses disposable, propellantfree paint pouches in a rechargeable compression device. User friendly control panel Ready to use in less than 30 seconds Smart Electronics self monitors and maintains spray pressure Lithium ion battery sprays up to 48 paint pouches when fully charged Heavy duty design withstands everyday wear and tear Fits existing marking wands HNA# Part# UoM Price TB Ea $ Rust-Oleum Paint Pouches SpraySmart The SpraySmart system is a reusable marking paint system that uses disposable, propellant-free paint pouches in a rechargeable compression device. Custom design allows for quick color changes Transparent package lets you see the color and how much paint is left Empty pouch can be disposed of with regular trash Each pouch marks more linear feet than the leading competitor Non-clogging paint tip HNA# Part# Color UoM Price TB Hi Vis Yellow Ea $3.85 TB Safety Red Ea $3.85 TB White Ea $3.85 Sanford L P TEC Markers Permanent Sharpie Contains trace element certified ink. Meets requirements for trace element certified ink for the nuclear energy, aerospace, electronics, aeronautic and ship building industries. Permanent ink delivered from a fine tip. Each marker is identified with the batch number of the ink. HNA# Part# Color UoM Price W Black Ea $6.61 Irwin Industrial Tools Industrial Markers Sharpie Industrial strength for tough marking jobs Marks on wet and oily surfaces Durable aluminum barrel and felt tip stand up to heavy use Special water resistant ink formula dries quickly Excellent for marking corrugate, wood, metal, foil, stone, plastic and leather and more Large ink supply for big projects IPG PT14 Blue Masking Tape 14-Day - UV Resistant IPG high performance PT14 blue painters tape offers superior adhesion and clean removal with BLOC it Clean Line Technology. Our proprietary edge treatment delivers clean, crisp paint lines every time. Prevents paint from seeping under the tape. Superior paint lines Conformability & tear strength INDOOR & OUTDOOR 14 day clean removal Excellent cornering Resistant to UV rays up to 14 days Strong enough to hang visquine & masking paper Can be used on hardwood floors, lacquer & laminated surfaces HNA# Part# Size UoM Price ³ ₄" x 60yds. Rl $ " x 60yds. Rl $4.50 H ¹ ₂" x 60yds. Rl $ " x 60yds. Rl $8.87 HNA# Part# Color UoM Price Black Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 35

38 IPG AC30 Duct Tapes 10 Mil Medium Grade Polyethylene (PE) coated cloth tape with an aggressive natural rubber pressure sensitive adhesive. Product is designed to answer the end-use/consumer need for an economical general purpose duct tape. Common Applications: Packaging, wrapping and sealing, binding and bundling, exterminators, book repair, weather proofing, and general maintenance Storage Conditions: products should be stored in a cool, dry area in original packaging, and used within 12 months of shipment date. Specs: Backing: PE coated cloth Tensile: 20 Elongation (%): 18 Adhesion to Steel: 55 Quick Stick to Steel: 26 Color: Silver HNA# Part# Size Description UoM Price X "x60yds Medium Grade Rl $9.05 IPG 1100 Extra Heavy Duty Carton Sealing Tapes Hot Melt - Pressure Sensitive IPG 1100 Premium BOPP Hot Melt Carton Sealing Tape features Corru- Grip Adhesive Technology. Designed to stick to every carton - especially recycled corrugate. Ground-breaking adhesive formulation, developed specifically for optimal closure of high percent content recycled corrugate Expanded application temperature and humidity range, unique for a Hot Melt product, provides superior closure Application range - +35ºF ºF Operating range - 10ºF to 140ºF Confidently and successfully seals boxes in more environmental conditions than any other product in its class Manufactured entirely and exclusively in the USA - your guarantee of quality and consistency 3.0 mil thickness HNA# Part# Size UoM Price X78212 F4210 2" x 60yds. Rl $3.55 X78215 F4225 3" x 60yds. Rl $5.48 X78214 F "x1000yds. Rl $54.27 IPG 6100 Carton Sealing Tapes Utility Grade - Hot Melt General purpose, hot melt carton sealing tape. Provides secure holding power to a variety of corrugated and linerboard boxes, for consistent, reliable closures. For light to medium weight box sealing, package repair and bundling applications. Backing (Blown BOPP Film) : 1.0 mils Tensile Strength (MD) : 25 lbf/in width Elongation (at break) : 70%+ Adhesive : Synthetic Rubber/Resin Adhesion to Steel : 32 oz/in Total Thickness : 1.60 mils Application Range : 45 F to 120 F Operating Range : -10 F to 140 F Color: Clear IPG 7100 Carton Sealing Tapes Production Grade - Hot Melt Intertape Brand Hot Melt Adhesive Carton-Sealing Tapes offer the widest range of application flexibility available. Superior adhesion properties, holding force and tensile strength ensure consistent, reliable seals. Noted for quiet release and easy unwind, IPG s Hot Melt Tape is well suited for automatic case-sealing machines. Production grade, hand held dispenser length, polypropylene carton sealing tape, manufactured with hot melt pressure sensitive adhesive. Provides consistent and effective closure to a variety of corrugated and linerboard boxes. For medium weight, manual box sealing, package repair and bundling applications at room temperature. Backing (Blown BOPP Film) : 1.1 mils Tensile Strength (MD) : 28 lbf/in width Elongation (at break) : 70% Adhesive : Synthetic Rubber/Resin Adhesion to Steel : 32 oz/in Total Thickness : 1.85 mils Application Range : 45 F to 120 F, Operating Range : -23 F to 140 F Color: Clear HNA# Part# Size Type Mil UoM Price X78537 F4070 2"x54yds Hand 1.85 Rl $1.30 IPG Stretch Hand Wrap Expresswrap Expresswrap...a new family of convenient stretch hand wrap, available in a variety of widths and gauges to match you needs. Whether you need to wrap a warehouse of pallets or bundle a few packages for UPS shipment, Expresswrap will handle the job quickly and securly. Expresswrap is also a great solution for many applications around the home, office, workshop, yard and school. Performance Features Equal Customer Value Lightweight rolls reduce the stress in applying the film. Handles in every carton meaning never having to search for the dispenser. Excellent puncture and tear resistance handle the most severe protrusions, sharp edges and shipping hazards. Same great StretchFlex Stretch Wrap produced for high speed automatic applications Aggressive cling ensures that layers of film stick together but won t damage the product. Unmatched optics allow for easy product recognition and a clean appearance. HNA# Part# Size Gauge UoM Price CB8421 HG HC 20"x1,000' 80 Rl $23.02 IPG High Performance Films Machine-stretch Flex SuperFlex High Performance Films provide significant down gauging opportunities yielding as much as a 30% reduction in the amount of film needed to securely contain a load. In addition to providing a measurable cost savings, the reduction in film consumed means that SuperFlex films are environmentally preferred over conventional films. StretchFlex Stretch Wrap rounds out the Intertape Polymer Group line of films and is designed to meet a variety of stretch wrapping needs. HNA# Part# Size Type UoM Price X78528 F4005 2" x 55yds. Hand Rl $1.18 HNA# Part# Film Thickness Width Length UoM Price X78149 H V6 70 gauge 20" 6000 ft Rl $78.40 J87535 H V5 80 gauge 20" 5000 ft Rl $ PRODUCTS ARE SUBJECT TO AVAILABILITY

39 Osborn International Hand Scratch Brushes Curved Handle Pro Kiln-dried hardwood for maximum tuft retention Smooth machined finish provides excellent comfort in use Hang-up hole for convenient storage HNA# Part# Fill Fill Diameter Trim Block Type Length Brush Length Number of Rows UoM Price Steel ¹ ₆₄" 1¹ ₈" Hardwood 13³ ₄" 6" 3 x 19 Ea $ Stainless ¹ ₆₄" 1¹ ₈" Hardwood 13³ ₄" 6" 3 x 19 Ea $ Stainless Steel ¹ ₆₄" 1¹ ₈" Hardwood 13¹¹ ₁₆" 6" 4 x 19 Ea $4.43 Osborn International Scratch Brushes Kiln-dried hardwood for maximum tuft retention Smooth machined finish provides excellent comfort in use Hang-up hole for convenient storage HNA# Part# Fill Trim Brush Length Length UoM Price Polypro ⁷ ₁₆" 1⁷ ₁₆" 7³ ₄" Ea $ Brass Wire ⁷ ₁₆" 1⁷ ₁₆" 7³ ₄" Ea $ Stainless Wire ⁷ ₁₆" 1⁷ ₁₆" 7³ ₄" Ea $3.51 Osborn International Economy Floor Brushes Economy The Economy line of floor brooms from Osborn is a durable, economical line of quality products for both industrial and DIY applications. Each block has threaded holes for wood or fiberglass handles, and all fill materials are staple set for longer service life HNA# Part# Block Length Fill Trim Length UoM Price X " Blue Flagged Polypro 2³ ₄" Ea $18.59 X " Black Tampico 2³ ₄" Ea $14.05 X " Black Tampico 2³ ₄" Ea $18.66 X " Light Blue Polypro & Dark Blue Polypro 2³ ₄" Ea $18.16 Osborn International Upright Broom Corn/Grass Blend - Sewed Binding Osborn Uvex by Honeywell Extreme Environment Safety Glasses Anti Fog - Scratch Resistant Livewire In extreme environments, anti-fog performance and durability are required to keep workers protected. Uvex Livewire sealed eyewear delivers on all counts. Lenses feature proprietary Uvextreme Plus anti-fog coating for superior, long-lasting fog-free vision. Most anti-fog coatings perform well right out of the box, but their effectiveness will diminish over time. Permanently bonded to the lens, Uvextreme Plus promises anti-fog protection that lasts up to 10X longer * even after extended wear and repeated washings. Uvextreme Plus also provides 2X better scratch-resistance* than competitive antifog coated products for longer- lasting lenses. Top and side channels in the frame are strategically placed and designed for optimal venting to enhance anti-fog performance while keeping out dust and debris. Designed to stand up to the harshest conditions, Dura-streme lenses combine two high-performance lens coatings on one lens Uvextreme anti-fog on the interior and Ultra-dura anti-scratch on the exterior for up to 3x longer lens life.* Offered in the widest assortment of lens tints utilizing Uvex Spectrum Control Technology (SCT) lenses. Available in Clear, Amber, Espresso, Gray, SCT-Reflect 50 (indoor/outdoor mirror), SCT-Gray, SCT-Low IR, Shade 3.0, Shade 5.0 from low light, to glare, to infrared protection, there s a Uvex Livewire lens for the job. 100% dielectric Meets the ANSI Z standard Certified to the requirements of the CSA Z94.3 standard Not for chemical splash applications HNA# Part# Lens Frame Coating UoM Price F58956 S2600HS Clear Black Hydro-Shield, Ant-Fog Pr $15.38 F58957 S2601HS Gray Black Hydro-Shield, Ant-Fog Pr $15.46 Kimberly-Clark Professional V30 NEMESIS Safety Eyewear Anti Fog - Uncoated Sporty, flexible, lightweight design Enhanced nosepiece design with integrated ridges to channel away sweat Every pair includes a neck cord Meets ANSI Z standards Lenses are made of a polycarbonate material that provides 99% UVA/UVB/UVC protection HNA# Part# Lens Frame Coating UoM Price J Clear Black Uncoated Pr $4.19 T Clear Black Anti-Fog Pr $4.92 J I/O Clear Black Uncoated Pr $4.47 J Smoke Mirror Black Uncoated Pr $4.47 Osborn Upright Brooms are excellent for a wide variety of applications: wet sweeping, heavy industrial use and all-purpose easy sweeping. HNA# Part# Length Trim Length Width UoM Price " 14" 10" Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 37

40 Uvex by Honeywell Safety Glasses Anti Fog - Scratch Resistant Protege The Uvex Protégé combines sports-styling with lightweight comfort and flexible design. Whether in construction, heavy manufacturing, utilities or various clean industries, with the Uvex Protégé, workers get the protection they need with the comfort and style they want. Proprietary floating lens design offers increased flexibility and fit Ultra lightweight design at only 27.5 grams, weighs less than one ounce Secure wrap-around brow expands to fit a wide range of users Soft temple tip pads provide a secure fit, Soft, clear nose pads prevent slipping Meets military V0 ballistic test for impact, Certified to CSA Z94.3 standards Lifetime frame guarantee, Made in USA ANSI Z87+ HNA# Part# Lens Frame Coating UoM Price BG0187 S4200HS Clear Black Hydro-Shield, Ant-Fog Pr $5.16 BG0188 S4201HS Gray Black Hydro-Shield, Ant-Fog Pr $5.91 Uvex by Honeywell Safety Goggles Stealth Never again should your workers complain about uncomfortable, bulky goggles because Uvex has set the new standard in comfort, fit and protection. The easiest lens replacement system on the market: just snap a new lens onto the front of the goggles for quick, cost-effective replacement Exclusive uvextreme AF lens coating provides anti-fog, antiscratch, anti-static, and anti-uv protection Unique toric lens design offers a close fit, superior optics, and dramatically improved peripheral vision Elastomer seal stays amazingly soft, pliable, and comfortable for the life of the frame ANSI Z87+ HNA# Part# Lens Coating Frame UoM Price BG0185 S3960HS Clear Hydro-Shield, Ant-Fog Gray Pr $12.36 Howard Leight by Honeywell Disposable Firm Foam Earplugs NRR 30dB FirmFit Showa Disposable Nitrile Gloves Economy Grade - Powder Free ShowaBest SHOWA Best Nitrile 7500PF Disposable glove is specially suited to customers looking for a low cost, high quality disposable nitrile glove historically have had few options. We now are introducing our value line of disposable Nitrile gloves, Best Nitrile. This 4-mil, 9.5-inch powder free glove is a perfect solution for customers who require the barrier protection found in disposable nitrile, but who operate on a disposable Latex budget. 100% economy grade nitrile, rolled cuff Color: Blue Applications: Automotive Maintenance, Manufacturing, Food Processing, Laboratories, Janitorial, Paint Applications, Fuel Handling and Housekeeping HNA# Part# Size Mil Length Pkg. Qty. UoM Price PFXS XSmall/ " 100 Gloves Bx $9.50 G PFS Small/ " 100 Gloves Bx $7.88 G PFM Medium/ " 100 Gloves Bx $7.88 G PFL Large/ " 100 Gloves Bx $7.88 G PFXL XLarge/ " 100 Gloves Bx $7.88 J PFXXL 2XLarge/ " 100 Gloves Bx $7.88 Ansell Protective Products Disposable Nitrile Gloves Powder Free Microflex XCEED XC-310 Ergonomically designed to reduce hand fatigue Our Microflex XCEED XC-310 gloves are scientifically designed to reduce muscle effort without limiting the ability to meet the tactile demands of your work. The unique formulation delivers a thinner, lighter examination glove with increased strength and protection. The first certified ergonomic exam glove Smart packaged with 250 gloves per box Textured fingertips for a great grip Lowest pinhole rates (AQL 0.65) sets a new standard for protection HNA# Part# Size Length Pkg. Qty. UoM Price F31801 XC310-XS XSmall/6 9.5" 250 Gloves Bx $ XC310-S Small/7 9.5" 250 Gloves Bx $ XC310-M Medium/8 9.5" 250 Gloves Bx $ XC310-L Large/9 9.5" 250 Gloves Bx $ XC310-XL XLarge/10 9.5" 250 Gloves Bx $20.99 Ansell Protective Products Disposable Neoprene Gloves Powder Free Microflex NeoGard C52 Longer wear time comfort: More protection. Greater compliance. Extensive research into earplug preferences revealed that some workers prefer a firm foam earplug. They gain a sense of security from feeling the earplug in their ear. And while they like knowing the earplug is there, workers want greater comfort. Independent tests reveal that FirmFit outperforms the leading classic-style earplug, providing workers with a more comfortable option. Greater Protection: Effective NRR 30dB provides excellent protection in most medium-to-high noise environments. Easy to Insert: Requires less pressure to roll down. Slow recovery rate gives you plenty of time to correctly insert in ear canal. Easy to See: Distinct warning orange color makes compliance checks easy. Softer: You can feel that FirmFit is softer when you hold it. Less Pressure: FirmFit exerts less expansion pressure on the ear canal. Regulations: ANSI S NRR 30dB HNA# Part# NRR Cording Pkg. Qty. UoM Price B60630 FF-1 30db Uncorded in Polybag 200 pair Bx $21.07 B60667 FF-30 30db Corded in polybog 100 pair Bx $24.08 Ergonomically designed, with excellent wet and dry grip. Our new Microflex Neogard C52 glove is made from a unique, non latex formulation that delivers outstanding grip in wet and dry environments. With unparalleled tactile sensitivity and comfort, Neogard gloves are ideal for every task. Soft and stretchy chloroprene formulation is highly comfortable with exceptional tactile sensitivityþ Advanced formulation delivers excellent wet and dry gripþ Polymer coated for easy donning, especially on damp hands HNA# Part# Size Material Length Pkg. Qty. UoM Price F79531 C521 Small/7 Neoprene 9.6" 100 Gloves Bx $11.60 F79533 C522 Medium/8 Neoprene 9.6" 100 Gloves Bx $11.60 F79534 C523 Large/9 Neoprene 9.6" 100 Gloves Bx $11.60 F79535 C524 XLarge/10 Neoprene 9.6" 100 Gloves Bx $ PRODUCTS ARE SUBJECT TO AVAILABILITY

41 Kimberly-Clark Professional* Jackson Safety G29 Solvent Gloves The Jackson Safety* G29 Solvent Glove allows workers handling solvents to do their job in a safe and productive manner while providing a level of dexterity similar to thin mil gloves. FEATURES: 12 mil thick (at finger); 9 mil thick (at palm) 12 length Neoprene blend construction designed for protection from solvents Textured fingertips for wet or dry grip Ambidextrous to improve usage efficiency Silicone-free Powder-free Not made with natural rubber latex Highest level of dexterity per EN420:2003 standard Available in sizes 6(XS) 11 (2XL) TYPICAL USES: Handling hydraulic fluids Working with solvents - see G29 Chemical Selection Guide for list of chemicals Wiping down parts and machinery with solvents Janitorial cleaning HNA# Part# Size Mil Length Pkg Qty UoM Price F XSmall/ " 50 Bx $29.17 F Small/ " 50 Bx $29.17 F Medium/ " 50 Bx $29.17 F Large/ " 50 Bx $29.17 F XLarge/ " 50 Bx $29.17 F XLarge/ " 50 Bx $29.17 Ansell Protective Products Disposable Nitrile Gloves Powder Free TouchNTuff The TouchNTuff glove with ANSEL GRIP technology minimizes the force required to grip dry, wet or oily objects reducing hand and arm fatigue and improving dexterity, safety and productivity.þthis innovative glove is made of a proprietary soft and durable formulation that conforms to the hand, providing superior comfort for longer wear periods.þ With a high tensile strength and 3 times the puncture resistance of latex or PVC disposables, the TouchNTuff is a strong and robust glove that offers splash resistance against a variety of industrial chemicals, for longer periods than other nitrile disposable gloves. HNA# Part# Size Length Pkg. Qty. UoM Price BG Small/7 9.65" 100 Gloves Bx $15.33 BG Medium/8 9.65" 100 Gloves Bx $15.33 BG Large/9 9.65" 100 Gloves Bx $15.33 BG XLarge/ " 100 Gloves Bx $15.33 Ansell Protective Products Chemical Resistant Nitrile Gloves AlphaTec Confident grip performance with enhanced flexibility ANSEL GRIP technology creates safe and secure glove contact with tools or part surfaces by wicking liquids into glove coating micro-channels and ensures optimal control and confidence when handling oily or wet objects The high performance nitrile compound coating offers superior snag, puncture and abrasion protection for long-term wear Snug, second-skin tailoring tightens the fit across the palm for added comfort and tactility and improves dexterity when moving between tasks The cotton flocked lining helps manage perspiration Applications: Application of anti-corrosion materials, Cleaning of spray gun in paint shops, Draining and disposal of waste oils, Handling of parts coated with metal-working fluids, Maintenance of industrial machine toosl HNA# Part# Size Mil Length UoM Price D Small/ " Pr $4.47 D Medium/ " Pr $4.47 D Large/ " Pr $4.47 D XLarge/ " Pr $4.47 D XLarge/ " Pr $4.47 Wells Lamont Industrial Group Knit Cut Resistant Gloves ANSI Cut Level 5 - Sandy Nitrile Palm FlexTech Seamless machine knit cut resistant shell provides all-day comfort and protection Sandy nitrile palm coating delivers improved grip in wet and oily applications Machine washable for longer service life ANSI Cut Level 5 Sold by the dozen pair HNA# Part# Size UoM Price BK0011 Y9216XS XSmall/6 Pr $12.12 F59027 Y9216S Small/7 Pr $11.28 F59026 Y9216M Medium/8 Pr $11.28 F59025 Y9216L Large/9 Pr $11.28 F59029 Y9216XL XLarge/10 Pr $11.28 F59030 Y9216XXL 2XLarge/11 Pr $11.28 Showa Cut Resistant Nitrile Gloves ANSI Cut Level 4 Bipolymer coating, black & white w/ gray, 10 gauge seamless cut resistant liner, flat-dipped sponge nitrile. Protects from oils, hydrocarbons, grease and abrasion Ideal for oily applications where sharp edges are prevalent EN 420 dexterity level 5 rating HNA# Part# Size UoM Price BJ Small/7 Pr $10.95 Wells Lamont Industrial Group Touchscreen Cut Resistant Gloves ANSI Level 4 Patent pending yarn technology delivers cut resistance and touchscreen capability Ultra-lightweight construction provides bare hand dexterity and superior tactile sensitivity Minimal particle shedding to meet cleanroom classifications and requirements Meets Category II using the Helmke Drum Test referenced in IEST RP-CC003.3 Ambidextrous ANSI Level 4 Sold by the dozen pair HNA# Part# Size Material UoM Price E61102 MT130XS XSmall/6 Yarn Pr $12.32 E61104 MT130S Small/7 Yarn Pr $12.32 E61105 MT130M Medium/8 Yarn Pr $11.77 E61108 MT130L Large/9 Yarn Pr $11.77 E61113 MT130XL XLarge/10 Yarn Pr $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 39

42 Superior Glove Hi-Viz Composite Knit Glove ASTM ANSI Cut Level 4 - With Polyurethane Palm Coating TenActiv These hi-viz cut-resistant gloves are part of Superior Glove s TenActiv Series, designed to meet a range of applications, all at a great price. Gloves are made from TenActiv yarn, which is a high performance filament that is lintfree and stronger than steel on an equal weight basis. Great for jobs that require minimum product contamination by the gloves. This glove gives you unsurpassed comfort and dexterity. The addition of the yellow polyurethane coated palms provides grip and boosts puncture resistance, all without adding bulk or reducing touch sensitivity. Our more flexible polyurethane formulation is tweaked to give a higher grip and a more skin like feel than other polyurethane gloves. Super tactile sensitivity and dexterity. Hi-viz knit shell increases worker visibility on the job. Applications: Handling Sharp Objects, Glass Plants, Construction, Automotive Industry, Aerospace Industry, Metal Fabrication, Metal Stamping HNA# Part# Size Material UoM Price F77936 STAGHVPU-6 XSmall/6 Polyurethane Pr $7.62 F77937 STAGHVPU-7 Small/7 Polyurethane Pr $7.62 F77938 STAGHVPU-8 Medium/8 Polyurethane Pr $7.62 F77939 STAGHVPU-9 Large/9 Polyurethane Pr $7.62 F77932 STAGHVPU-10 XLarge/10 Polyurethane Pr $7.62 F77933 STAGHVPU-11 2XLarge/11 Polyurethane Pr $7.62 Wells Lamont Industrial Group Hi-Vis Cut Resistant Gloves ANSI Cut Level 4 - PU Palm Wells Lamont Industrial Group Hi-Vis Cut Resistant Gloves ANSI Cut Level 4 - Sandy Nitrile Palm Hi-vis cut resistant shell delivers outstanding comfort, flexibility and protection Sandy nitrile palm coating offers improved grip in wet and oily applications Hi-vis color improves awareness ANSI Cut Level 4 Sold by the dozen pair HNA# Part# Size Material UoM Price E60444 Y9296XS XSmall/6 13-Gauge Machine Knit Pr $9.74 E60517 Y9296S Small/7 13-Gauge Machine Knit Pr $9.74 E60581 Y9296M Medium/8 13-Gauge Machine Knit Pr $9.74 E60603 Y9296L Large/9 13-Gauge Machine Knit Pr $9.74 E60642 Y9296XL XLarge/10 13-Gauge Machine Knit Pr $9.74 E60682 Y9296XXL 2XLarge/11 13-Gauge Machine Knit Pr $9.74 Superior Glove Cut Resistant Kevlar Sleeves ASTM ANSI Cut Level 2 Hi-vis cut resistant shell delivers outstanding comfort, flexibility and protection Polyurethane (PU) palm coating is thin, flexible and perfect for handling small parts Hi-vis color improves awareness ANSI Cut Level 4 Sold by the dozen pair HNA# Part# Size Material UoM Price AT6286 Y9294XS XSmall/6 13-Gauge Machine Knit Blend Pr $8.18 E91822 Y9294S Small/7 13-Gauge Machine Knit Blend Pr $8.26 E91821 Y9294M Medium/8 13-Gauge Machine Knit Blend Pr $8.26 E91820 Y9294L Large/9 13-Gauge Machine Knit Blend Pr $8.26 E91823 Y9294XL XLarge/10 13-Gauge Machine Knit Blend Pr $8.26 E91824 Y9294XXL 2XLarge/11 13-Gauge Machine Knit Blend Pr $8.26 Black Cutban sleeves are knit with a high tenacity filament yarn that offers tough, durable protection (650 grams of cut resistance). This single-layer sleeve is tapered at both ends for extra comfort. Arm openings feature STAYz-UP non-slip without shrinkage. Elasticized biceps, and thumb holes. Not for spark and flame applications. Can be washed multiple times. Applications: Metal Handling, Automotive, Metal Fabrication Color - Black, Hides dirt and grease stains Thumb Hole Length - 18 inches Note: Styles feature a tapered design, where the 5" wrist portion is knit in a finer gauge, and the remaining upper portion in a bigger gauge for a more natural, tapered fit. HNA# Part# Length Size Material Color UoM Price BJ4027 KP1T18TH/S 18" Small Kevlar Black Pr $6.77 BJ4026 KP1T18TH/M 18" Medium Kevlar Black Pr $6.77 F28497 KP1T18TH 18" Large Kevlar Black Pr $6.77 Superior Glove FR Cut-Resistant Kevlar Composite Sleeves Thumb Hole - ASTM Cut Level 4 Contender The very first plaited sleeve, like ever, with thumbhole Contender single-layer sleeves feature a Kevlar composite outer, cotton inner plait, rated ASTM cut level 4 (1650 grams of cut protection). Sleeves are suitable for intermittent thermal contact and minor spark protection. Because all of the Kevlar is on the outside, the sleeve is highly cut resistant but extremely comfortable. The cotton inside layer allows for soft, comfortable wear. This is Superior Glove s most economically priced ASTM 4 sleeve. The fit is generously wide, unlike many competitors who make their sleeves very narrow to save on materia costs. Applications: Metal Handling, Automotive, Metal Fabrication, Welding HNA# Part# Length Material Color UoM Price BK0002 KG/C18 18" Kevlar / Cotton Tan Pr $ PRODUCTS ARE SUBJECT TO AVAILABILITY

43 Superior Glove Aramid Cut- and Flame-Resistant Sleeves with STAYz-UP Non-Slip Biceps Thumb Hole - ASTM ANSI Cut Level 4 Contender These Contender sleeves feature an outer composite-knit layer, consisting of cut-resistant, aramid-encased, composite filament fiber yarn. The special fabrication of these sleeves means you get ASTM cut-level 4 protection (2130 grams protection) without compromising any comfort. These sleeves are flame resistance the material will not will not burn, melt or drip. The tapered knit fit is combined with our STAYz-UP technology an elastic armband with polymer dots that essentially eliminates any sliding or slipping of the sleeves. Meaning you can guarantee full arm coverage so you can get the job done without having to roll up your sleeves. Can be washed multiple times without shrinkage, no bleach. The tapered fit with thumbhole further enhances comfort for the wearer while the blended coloration hides dirt, further extending wear. Work safely and comfortably with a high level of cut resistance, abrasion resistance and comfort. Applications Welding Metal Handling Automotive Assembly HNA# Part# Length Size Color UoM Price BK0004 KGC1T18T/S 18" Small Brown Pr $11.39 BK0003 KGC1T18T/M 18" Medium Brown Pr $11.39 Ansell Protective Products Multi-Purpose Cut-Resistant Gloves ANSI Cut Level 2 HyFlex HyFlex Glove Safety, durability, and comfort combined. Features & Benefits Combines Ansell INTERCEPT Technology yarn liner with a polyurethane palm coating for the ultimate combination of comfort and protection ANSI Level 2 cut protection for worker confidence on the job ANSI Level 5 abrasion protection for longer wear life Gloves can be washed and re-used without loss of cut protection Applications: Final & sub-assembly areas when handling metal components, Glass handling & installations Forming, machining & bending small parts, Small part stamping Wiring. HNA# Part# Size Material UoM Price XSmall/6 Polyethylene/Polyurethane Pr $ Small/7 Polyethylene/Polyurethane Pr $ Medium/8 Polyethylene/Polyurethane Pr $ Large/9 Polyethylene/Polyurethane Pr $ XLarge/10 Polyethylene/Polyurethane Pr $ XLarge/11 Polyethylene/Polyurethane Pr $ XLarge/12 Polyethylene/Polyurethane Pr $8.12 Ansell Protective Products Ultralight Cut Resistant Gloves Dyneema Fiber - Polyurethane Coating HyFlex ANSI Cut Level 2 Ultralight Cut Resistant Glove Ultralight Duty 18 Gauge Liner Barehand-like dexterity for high tactility First-to-market glove to provide ANSI Cut Level 2 in an 18 gauge style Dyneema Diamond Technology provides high cut-to-dexterity ratio for safety with comfort Soft, sheer Dyneema Diamond Technology fiber breathes to keep hands cool and dry D3 Pinky matches natural contours of hand Thin Polyurethane Coating Coating enables high tactility High abrasion resistance extends glove life HNA# Part# Size Material UoM Price U XSmall/6 Dyneema/Polyurethane Pr $9.18 U Small/7 Dyneema/Polyurethane Pr $9.18 U Medium/8 Dyneema/Polyurethane Pr $9.18 U Large/9 Dyneema/Polyurethane Pr $9.18 U XLarge/10 Dyneema/Polyurethane Pr $9.18 J XLarge/11 Dyneema/Polyurethane Pr $9.00 Ansell Protective Products Multi-Purpose Cut-Resistant Gloves ANSI Cut Level 2 - Intercept Cut Resistance Technology HyFlex The features a 15G lightweight liner with INTERCEPT yarns that provides ANSI Cut Level 2 protection. The liner also features an optimized lycra content that is soft and cool on the skin for all-day comfort. The palmdipped polyurethane (PU) coating provides enhanced grip in light oil environments for secure handling and offers ANSI Abrasion Level 6 for extended glove life. PU coating is also silicone-free to protect the quality of industrial finishing. Best-in-class Cut Resistance Technology Palm Dip Geometry Industries: Aerospace, Automotive, Machinery and Equipment, Manufacturing, Metal Fabrication, Mining Applications: Assembling metal parts and components, Assembling white goods, Cutting of small dry or lightly oiled parts and maintenance, General maintenance, Glass manufacturing, Handling of sharp-edged objects, Metal fabrication, Paint Shop, Plastics injection and molding, Preassembling HNA# Part# Size Material UoM Price BH XSmall/6 Polyurethane Pr $8.26 BH Small/7 Polyurethane Pr $8.26 BH Medium/8 Polyurethane Pr $8.26 BH Large/9 Polyurethane Pr $8.26 BH XLarge/11 Polyurethane Pr $8.26 Superior Glove Nitrile Palm Gloves ASTM ANSI Cut Level 4 - With Black Widow Grip Micropore Nitrile Palm Coating Dexterity Kevlar From Superior s Dexterity line of gloves: a cut-resistant 13-gauge Kevlar / composite filament fiber blended string knit glove made with Black Widow Grip micropore nitrile palm coating. The Black Widow Grip design utilizes the latest developments in micropore technology by infusing the nitrile coating with millions of tiny pores. In simple terms, these pores displace oils and liquids when pressed against smooth surfaces, and create a kind of suction that further increases grip. Best of all, the pores do not allow oil to saturate the nitrile coating as with a foam nitrile glove, keeping hands dry. Great comfort, dexterity and grip, and perfect choice for work around CNC machines, handling oily metal parts and more. The addition of the micropore coated palms provides grip and boosts puncture and abrasion resistance, all without adding bulk or reducing touch sensitivity. HNA# Part# Size Material UoM Price BJ4030 S13KGPN-6 XSmall/6 13-gauge Kevlar Pr $15.08 BJ4031 S13KGPN-7 Small/7 13-gauge Kevlar Pr $15.08 BJ4032 S13KGPN-8 Medium/8 13-gauge Kevlar Pr $15.08 BJ4033 S13KGPN-9 Large/9 13-gauge Kevlar Pr $15.08 BJ4028 S13KGPN-10 XLarge/10 13-gauge Kevlar Pr $15.08 BJ4029 S13KGPN-11 2XLarge/11 13-gauge Kevlar Pr $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 41

44 Superior Glove Composite Knit Cut-Resistant Gloves ASTM ANSI Cut Level 2 -With Polyurethane Palm Coating TenActiv TenActiv fine 15-gauge gloves are designed to meet a range of applications, all at a great price. All TenActiv gloves feature lintfree, continuous filament yarn that is stronger than steel on an equal-weight basis. This polyurethane-coated style offers a high coefficient of friction that is non-shedding, making them ideal for those working with circuit boards or any application where contamination is of concern. A snug fit with unparalleled dexterity. Applications: Assembly, Maintenance, Aerospace, Steel Framing, HVAC, Metal Working and Fabrication, Glass Handling, Construction HNA# Part# Size UoM Price BJ4036 S15TAFGPU-6 XSmall/6 Pr $6.62 BJ4037 S15TAFGPU-7 Small/7 Pr $6.62 BJ4038 S15TAFGPU-8 Medium/8 Pr $6.62 BJ4039 S15TAFGPU-9 Large/9 Pr $6.62 BJ4034 S15TAFGPU-10 XLarge/10 Pr $6.62 BJ4035 S15TAFGPU-11 2XLarge/11 Pr $6.62 West Chester Protective Gear Hi-Vis Green High Dexterity Glove Wells Lamont Industrial Group Hi-Vis Synthetic Shell Gloves With Latex Palm Lightweight nylon shell delivers comfort and dexterity Sandy latex palm provides provides outstanding grip and flexibility Hi-vis color improves awareness Sold by the dozen pair HNA# Part# Size UoM Price BJ4046 Y9239S Small/7 Pr $2.14 B56428 Y9239M Medium/8 Pr $2.66 B56432 Y9239L Large/9 Pr $2.14 B56433 Y9239XL XLarge/10 Pr $2.66 West Chester Protective Gear Hi-Vis Yellow Shell with Foam Nitrile Palm Coating Provides Impact Protection This glove is made with hi-vis green spandex and a TPR hook and loop wrist on back of hand. It has a one piece synthetic leather palm that is padded with double stitching, lycra fourchettes, and a 4-way stretch spandex back. Features: Reinforced synthetic fingertips Reinforced synthetic leather thumb saddle Flexible 4-way stretch form-fitting spandex back in hi-vis green color Adjustable hook and loop wrist for the perfect fit Applications: Automotive Repair, Equipment Operation, Driving and General Use HNA# Part# Size UoM Price BJ4049 HVG86150/S Small/7 Pr $0.77 BJ4048 HVG86150/M Medium/8 Pr $0.77 BJ4047 HVG86150/L Large/9 Pr $0.77 BJ4050 HVG86150/XL XLarge/10 Pr $0.77 BJ4051 HVG86150/2XL 2XLarge/11 Pr $ g Hi-Vis Nylon glove with Hi-Vis Nitrile Foam palm coating & Black Westchester TPR on back of Hand. EN388 = 4142 Hi-vis yellow shell with hi-vis yellow foam nitrile palm coating Seamless knit shell, Machine washable 7 Millimeter Back of Hand TPR Industries & Applications: Metal Fabrication and Welding, Cleaning and Janitorial, Material Handling, Construction, Electrical, Manufacturing, Automotive Protection Need: Impact Resistant, High Visibility HNA# Part# Size UoM Price BJ4056 HVY713NFB/XS XSmall/6 Pr $0.68 BJ4054 HVY713NFB/S Small/7 Pr $0.68 BJ4053 HVY713NFB/M Medium/8 Pr $0.68 BJ4052 HVY713NFB/L Large/9 Pr $0.68 BJ4055 HVY713NFB/XL XLarge/10 Pr $0.68 BJ4057 HVY713NFB/2XL 2XLarge/11 Pr $ PRODUCTS ARE SUBJECT TO AVAILABILITY

45 West Chester Protective Gear R2 Rigger Glove with Cut Resistant PVC Palm The RigCat 2 offers a revolutionary palm design specifically made to handle highly abrasive tasks. This industrial grade PVC palm with synthetic leather backing ensures the longevity of your glove and allows your hands to have the dexterity they need to remain productive throughout the entire task. Features: TPR finger, hand and knuckle guards to protect against bumps & bruises Reinforced thermoplastic fingertips to reduce pinches; extended Kevlar reinforced thumb saddle Flexible 4-way stretch form fitting spandex back with Hi Visibility fabric and oil resistant & cut resistant PVC palm providing excellent grip in wet applications ANSI cut level 2, 764 gms ; EN 388: 3243 Kevlar thumb saddle increase product life Synthetic leather and PVC coverage offers ANSI cut 2 protection Colored bright red for easy signaling on the jobsite Industries & Applications: Hazmat and Abatement, Construction, Oil and Gas, Manufacturing Protection Need: Impact Resistant, Cut Resistant HNA# Part# Size UoM Price BJ /S Small/7 Pr $2.32 BJ /M Medium/8 Pr $2.32 BJ /L Large/9 Pr $2.32 BJ /XL XLarge/10 Pr $2.32 BJ /2XL 2XLarge/11 Pr $2.32 BJ /3XL 3XLarge/12 Pr $2.32 West Chester Protective Gear R2 Rigger Glove with Cut Resistant Silicone Palm The RigCat 5 s palm was specifically designed for grip enhancements in slick conditions. Silicone repels liquids ensuring the integrity of your grip even when completely submerged. The honeycomb pattern helps channel liquids away from the silicones surface allowing you to keep working for longer periods of time. Features: TPR finger, hand and knuckle guards to protect against bumps & bruises Reinforced thermoplastic fingertips to reduce pinches; extended Kevlar reinforced thumb saddle Flexible 4-way stretch form fitting spandex back with Hi Visibility fabric and oil & cut resistant palm providing excellent grip in wet applications ANSI cut level 4, 1743 gms ; EN 388: 3543 Kevlar thumb saddle increase product life Armortex palm backing for level 5 cut resistance and extreme durability Colored bright red for easy signaling on the jobsite Industries & Applications: Construction, Oil and Gas, Manufacturing, Hazmat and Abatement, Utilities Protection Need: Impact Resistant, Cut Resistant HNA# Part# Size UoM Price BJ /S Small/7 Pr $2.74 BJ /M Medium/8 Pr $2.74 BJ /L Large/9 Pr $2.74 BJ /XL XLarge/10 Pr $2.74 BJ /2XL 2XLarge/11 Pr $2.74 BJ /3XL 3XLarge/12 Pr $2.74 West Chester Protective Gear R2 Rigger Glove with Silicone Palm The RigAce s palm was specifically designed for grip enhancements in slick conditions. Silicone repels liquids ensuring the integrity of your grip even when completely submerged. The honeycomb pattern helps channel liquids away from the silicones surface allowing you to keep working for longer periods of time. Features: TPR finger, hand and knuckle guards to protect against bumps & bruises Reinforced thermoplastic fingertips to reduce pinches; extended Kevlar reinforced thumb saddle Flexible 4-way stretch form fitting spandex back with Hi Visibility fabric and oil resistant silicone palm providing excellent grip in wet applications Kevlar thumb saddle increase product life Backed with flexible synthetic leather for increased dexterity Colored bright red for easy signaling on the jobsite Industries & Applications: Construction, Oil and Gas, Hazmat and Abatement Protection Need: Impact Resistant HNA# Part# Size Material UoM Price BJ /S Small/7 Silicone Pr $1.98 BJ /M Medium/8 Silicone Pr $1.98 BJ /L Large/9 Silicone Pr $1.98 BJ /XL XLarge/10 Silicone Pr $1.98 BJ /2XL 2XLarge/11 Silicone Pr $1.98 BJ /3XL 3XLarge/12 Silicone Pr $1.98 West Chester Protective Gear R2 Rigger Glove with Dotted Palm The RigRunner is the token athlete of the R2 Evolution family. Constructed with a synthetic leather palm with PVC dots, this glove is made for a multitude of purposes throughout the oil, gas and mining industries. Features: TPR finger, hand and knuckle guards to protect against bumps & bruises Reinforced thermoplastic fingertips to reduce pinches Flexible 4-way stretch form fitting spandex back with Hi Visibility fabric and oil resistant synthetic leather palm with PVC dots to provide excellent grip in wet applications Synthetic leather base resist oils and other liquids Colored bright red for easy signaling on the jobsite Industries & Applications: Hazmat and Abatement, Utilities, Oil and Gas Protection Need: Impact Resistant HNA# Part# Size Material UoM Price BJ /S Small/7 Synthetic Leather Pr $1.74 BJ /M Medium/8 Synthetic Leather Pr $1.74 BJ /L Large/9 Synthetic Leather Pr $1.74 BJ /XL XLarge/10 Synthetic Leather Pr $1.74 BJ /2XL 2XLarge/11 Synthetic Leather Pr $1.74 BJ /3XL 3XLarge/12 Synthetic Leather Pr $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 43

46 West Chester Protective Gear R2 Winter Corded Palm Rigger Glove with Long Neoprene Cuff Hi-Viz Orange Wells Lamont Industrial Group Synthetic Knit Shell Gloves With Full NBR Coating and Nitrile Palm FlexTech Light weight and comfortable nylon shell with double coating Sandy nitrile palm coating offers improved grip in wet and oily applications Full NBR coating provides liquid resistance Sold by the dozen pair The R2 Winter Corded has 4-way stretch spandex on the back of hand. The polar fleece lining with a Hypora water resistant liner keeps hands warm and dry. The cotton corded palm allows for excellent grip when working with oil. TPRs on the back of hand and fingers provide back of hand protection against impact. The cuff is made with neoprene and spandex for added comfort. Features: 140gm Polar Fleece Cotton corded palm designed for use in the oil and gas industries TPR's on the back of hand and fingers protect hand from impact Neoprene slip-on wrist keeps glove tight on wrist and provides comfort Flexible 4-way stretch form fitting spandex material with high visability orange fabric Applications: Oil Rigging, Mechanical, Mining, Framing, Automotive, Electrical, HVAC, Plumbing HNA# Part# Size Material UoM Price BJ /S Small/7 Cotton Pr $1.18 BJ /M Medium/8 Cotton Pr $1.18 BJ /L Large/9 Cotton Pr $1.18 BJ /XL XLarge/10 Cotton Pr $1.18 BJ /2XL 2XLarge/11 Cotton Pr $1.18 BJ /3XL 3XLarge/12 Cotton Pr $1.18 HNA# Part# Size Material UoM Price Y9289XS XSmall/6 Synthetic Knit Pr $ Y9289S Small/7 Synthetic Knit Pr $ Y9289M Medium/8 Synthetic Knit Pr $ Y9289L Large/9 Synthetic Knit Pr $ Y9289XL XLarge/10 Synthetic Knit Pr $3.81 U02901 Y9289XXL 2XLarge/11 Synthetic Knit Pr $3.81 West Chester Protective Gear HPT Double Dipped Water Resistant Glove PosiGrip Showa General Purpose Water Repellent Gloves Fully Coated with Foamed Latex This general handling glove is breathable and water repellent with a fully coated latex grip. It offers reduced perspiration when it's hot yet warmth and dryness in wet conditions. Features: Engineered full foam aerated latex coating and extra grip coating on palm for high levels of grip and abrasion resistance Breathable with excellent flexibility thanks to the engineered coating technology Breathable 13 gauge liner Protects against cold and liquid Anatomical hand shape design provides soft comfort and premium fit Seamless knit for optimum comfort Manufactured using an ergonomically designed hand mold to reduce hand fatigue Industries: Aerospace, Agriculture, Automotive, Construction, Highway maintenance, Manufacturing, Railways, Wet work HNA# Part# Size Material UoM Price BJ S-06 Small/7 Latex Pr $6.17 BJ M-07 Medium/8 Latex Pr $6.17 BJ L-08 Large/9 Latex Pr $6.17 BJ XL-09 XLarge/10 Latex Pr $6.17 BJ XXL-10 2XLarge/11 Latex Pr $6.17 This fully coated double dipped 15 gauge nylon shell water resistant glove offers a great grip. Features: Double dipped and fully coated with HPT Hydropellent Technology EN 388 = 4131 Water resistant Industries & Applications: Maintenance, Material Handling, Manufacturing, Plumbing, Cleaning and Janitorial HNA# Part# Size Material UoM Price BJ SHPTFK/S Small/7 HPT Pr $3.59 BJ SHPTFK/M Medium/8 HPT Pr $3.59 BJ SHPTFK/L Large/9 HPT Pr $3.59 BJ SHPTFK/XL XLarge/10 HPT Pr $3.59 BJ SHPTFK/2XL 2XLarge/11 HPT Pr $ PRODUCTS ARE SUBJECT TO AVAILABILITY

47 West Chester Protective Gear PU Palm Coated Speckle Gray HPPE Gloves PosiGrip Rugged HPPE fiber is 10 times stronger than steel and 40% stronger than blended fabrics. Excellent cut protection in a comfortable glove. Features: Machine washable EN388 = 4542, ANSI 4 = 1797 gms Gray HPPE fiber shell with gray polyurethane coating Seamless knit shell Applications: Manufacturing, Automotive, Material Handling, Construction, Maintenance Protection Need: Cut Resistant, Washable HNA# Part# Size Material UoM Price BJ HGU/S Small/7 HPPE/Polyurethane Pr $6.18 BJ HGU/M Medium/8 HPPE/Polyurethane Pr $6.18 BJ HGU/L Large/9 HPPE/Polyurethane Pr $6.18 BJ HGU/XL XLarge/10 HPPE/Polyurethane Pr $6.18 BJ HGU/2XL 2XLarge/11 HPPE/Polyurethane Pr $6.18 Showa General Purpose Natural Rubber Coated Gloves Cotton/Poly Liner Atlas Fit ATLAS Fit 300 is a palm-dipped blue colored Natural Rubber glove provides durable protection without sacrificing long-wearing comfort. The cotton/polyester lining provides extremely comfortable fit. The rough textured lightweight Natural Rubber coating provides outstanding grip. An elastic knit-wrist secures the glove above the wrist for comfort and preventing debris from entering the glove. When your job demands abrasion resistance and gripping power while maintaining maximum dexterity choose ATLAS Fit 300. Knuckles are not coated to provide more dexterity and coolness. Natural Rubber Coating, 10 Gauge Seamless Knitted Liner Durable Rubber Coating Blue/Light Gray Color Light Gray Cotton-Polyester Lining Applications: Rough Textured Gripping, Construction, Landscaping, Carpentry, Floor Tiling, Maintenance, Masonry, Garbage Collection, Shipping and Receiving HNA# Part# Size Material UoM Price G S Small/7 Cotton/Polyester/Rubber Pr $ M-08 Medium/8 Cotton/Polyester/Rubber Pr $ L-09 Large/9 Cotton/Polyester/Rubber Pr $ XL-10 XLarge/10 Cotton/Polyester/Rubber Pr $2.68 Showa Lightweight Oil Repellent Gloves Durable and Comfortable SHOWA 381 is a durable, lightweight and extremely comfortable glove; ideal for assembly and precision handling tasks in dry and light oily handling conditions. The embossed pattern on the microporous foamed nitrile palm coating channels oils and grease away efficiently and the Microfibre yarn liner boosts vapour permeation significantly, leaving hands dry and comfortable. Features: Embossed microporous nitrile palm coating disperses oil away to allow a secure grip over long periods in light oily environments SHOWA engineered seamless, microfibre yarn liner which prevents irritation and absorbs and releases sweat from the surface of hands, helping them to remain cool and dry Micoporous nitrile coating allows warm air and moisture to escape from inside Abrasion level 4 for maximum abrasion resistance (EN388) Ultra-light weight: 19g Excellent fitting due to optimal liner design Unique SHOWA ergonomic shape that replicates the natural curve of the human hand Exceptional suppleness and comfort due to the combination of microfibre and spandex A flexible glove designed for easy movement and extended wear and the 0.84mm finger thickness allows for an excellent level of tactility and sensitivity Low lint with microfibre No latex allergy risks Industries: Aerospace, Automotive, Manufacturing, Warehousing & distribution HNA# Part# Size Material UoM Price BJ S-06 Small/7 microfiber, nitrile coating Pr $4.52 BJ M-07 Medium/8 microfiber, nitrile coating Pr $4.52 BJ L-08 Large/9 microfiber, nitrile coating Pr $4.52 BJ XL-09 XLarge/10 microfiber, nitrile coating Pr $4.52 West Chester Protective Gear Heavy Duty Grain Goat Gloves With 360 Degree Kevlar Lining Ironcat Heavy Duty Grain Goatskin glove is a natural fitting glove for heavy duty tasks. It features split patch reinforcements on the palm and thumb saddle as well as reinforced fingertips for increased protection. 360 degree Kevlar lining provides cut protection. Features: ANSI 3 cut resistance Kevlar lining provides cut protection on palm area Reinforced palm and fingertips Adjustable hook and loop wrist for the perfect fit and feel Flexible form-fitting stretch spandex back Industries & Applications: Manufacturing, Utilities, Plumbing, Construction, Maintenance, Material Handling, Automotive Protection Need: Cut Resistant HNA# Part# Size Material UoM Price BJ /S Small/7 Goatskin Pr $1.48 BJ /M Medium/8 Goatskin Pr $1.48 BJ /L Large/9 Goatskin Pr $1.48 BJ /XL XLarge/10 Goatskin Pr $1.48 BJ /2XL 2XLarge/11 Goatskin Pr $1.48 BJ /3XL 3XLarge/12 Goatskin Pr $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 45

48 Wells Lamont Industrial Group Goatskin Driver's Gloves ANSI Cut Level 3 West Chester Protective Gear Buffalo Leather Utility Gloves Soft and flexible goatskin leather provides comfort and durability Kevlar liner delivers cut protection Easy fitting gunn cut pattern Straight thumb Double shirred elastic wrist ANSI Cut Level 3 HNA# Part# Size UoM Price BK0008 Y0103S Small/7 Pr $14.46 BK0007 Y0103M Medium/8 Pr $14.46 BK0006 Y0103L Large/9 Pr $14.46 BK0009 Y0103XL XLarge/10 Pr $15.33 BK0010 Y0103XXL 2XLarge/11 Pr $16.70 West Chester Protective Gear Heavy Duty Top Grain Goatskin Gloves Double Palm Ironcat This glove is made of grain water buffalo, and provides excellent back of hand, and pinch point protection. There is also padding provided to the wrist. Kelvar thread is used to sew the palm of the glove. There is also padding provided to the wrist. Features: EN388 tested 2141 Made of water buffalo leather, cow leather Pre-curved fingers for great fit Foam padding on fingers and BOH Pinchpoint protection Applications: Moving metal, moving gas cylinders HNA# Part# Size Material UoM Price BJ /S Small/7 Buffalo Leather Pr $2.29 BJ /M Medium/8 Buffalo Leather Pr $2.29 BJ /L Large/9 Buffalo Leather Pr $2.29 BJ /XL XLarge/10 Buffalo Leather Pr $2.29 BJ /2XL 2XLarge/11 Buffalo Leather Pr $2.29 West Chester Protective Gear Keystone Thumb Select Grain Cowhide Driver Gloves Heavy Duty Top Grain Goatskin glove is a natural fitting glove for general duty tasks. It features top grain gold/pearl reinforcements on the palm and thumb saddle as well as reinforced fingertips for increased protection. Added padding in palm for increased comfort and wear. Features: Top Grain goatskin reinforcements on palm, thumb and fingertips for added protection and durability Adjustable hook and loop wrist for the perfect fit and feel Flexible form-fitting stretch spandex back Industries & Applications: Utilities, Oil and Gas, Maintenance, Electrical, Plumbing, Manufacturing, Automotive, Material Handling, Construction HNA# Part# Size Material UoM Price BJ /S Small/7 Goatskin Pr $1.22 BJ /M Medium/8 Goatskin Pr $1.22 BJ /L Large/9 Goatskin Pr $1.22 BJ /XL XLarge/10 Goatskin Pr $1.22 BJ /2XL 2XLarge/11 Goatskin Pr $1.22 Select grain cowhide leather driver glove. Extra protection by keeping safety in mind with Hi-Vis green at the fingertips and a Hi- Vis reminder to "WATCH YOUR HANDS". Keystone thumb is durable and allows for the best flexibility. Shirred elastic wrist. Features: Passes EN 533 Limited flame spread index level 1. 5x40. Flexible keystone thumb construction Grain Cowhide leather Hi-Vis green fingertips and"watch YOUR HANDS" safety statement Industries & Applications: Construction, Agriculture, Metal Fabrication and Welding, Manufacturing HNA# Part# Size Material UoM Price BJ IKGT/S Small/7 Leather Pr $5.96 BJ IKGT/M Medium/8 Leather Pr $5.96 BJ IKGT/L Large/9 Leather Pr $5.96 BJ IKGT/XL XLarge/10 Leather Pr $6.23 BJ IKGT/2XL 2XLarge/11 Leather Pr $6.75 BJ IKGT/3XL 3XLarge/12 Leather Pr $ PRODUCTS ARE SUBJECT TO AVAILABILITY

49 West Chester Protective Gear Wing Thumb Select Grain Economy Leather Driver Gloves Select grain economy leather palm with split leather back driver glove offer extra protection with Hi- Vis orange at the fingertips and a Hi-Vis reminder to "WATCH YOUR HANDS". Shirred elastic wrist helps keep dirt and debris from entering the glove. Features: Wing thumb construction Grain economy leather with Hi-Vis fingertips and safety statement Applications: Construction, Masonry, Agriculture, Iron/Steel Work, Mining, Foundry Operations, Transportation, Electrical Contractors HNA# Part# Size Material UoM Price BJ IWOT/S Small/7 Leather Pr $5.14 BJ IWOT/M Medium/8 Leather Pr $5.14 BJ IWOT/L Large/9 Leather Pr $5.14 BJ IWOT/XL XLarge/10 Leather Pr $5.14 BJ IWOT/2XL 2XLarge/11 Leather Pr $5.14 DuPont Personal Protection Limited Use Clothing Coveralls Tyvek Inherent barrier protection against dry particulate hazards General maintenance/operations - agriculture Spray painting - food processing Lead abatement - mold remediation Environmental cleanup - silica Asbestos abatement Even after abrasion, stops microporous particles better than other reusable garments An ideal balance of protection, durability and comfort Color: White HNA# Part# Size Description Pkg. Qty. UoM Price TY120S Medium Serged Seams, Collar, Front Closure 25 Ca $ TY120S Large Serged Seams, Collar, Front Closure 25 Ca $ W01457 TY120S XLarge Serged Seams, Collar, Front Closure 25 Ca $ J28438 TY120S 2XLarge Serged Seams, Collar, Front Closure 25 Ca $ TY120S 3XLarge Serged Seams, Collar, Front Closure 25 Ca $ TY125S Medium Serged Seams, Collar, Front Zipper Closure, Elastic Wrists/Ankles 25 Ca $ TY125SWH Large Serged Seams, Collar, Front Zipper Closure, Elastic Wrists/Ankles 25 Ca $ TY125S XLarge Serged Seams, Collar, Front Zipper Closure, Elastic Wrists/Ankles 25 Ca $ TY125S 2XLarge Serged Seams, Collar, Front Zipper Closure, Elastic Wrists/Ankles 25 Ca $ TY125S 3XLarge Serged Seams, Collar, Front Zipper Closure, Elastic Wrists/Ankles 25 Ca $ TY127S Medium Serged Seams, Collar, Front Zipper Closure, Elastic Wrists/Ankles 25 Ca $ TY127S Large Serged Seams, Collar, Front Zipper Closure, Elastic Wrists/Ankles 25 Ca $ W95595 TY127S XLarge Serged Seams, Collar, Front Zipper Closure, Elastic Wrists/Ankles 25 Ca $ TY127S 2XLarge Serged Seams, Collar, Front Zipper Closure, Elastic Wrists/Ankles 25 Ca $ TY127S 3XLarge Serged Seams, Collar, Front Zipper Closure, Elastic Wrists/Ankles 25 Ca $ TY122S Medium Serged Seams, Attached Hood, Front Zipper Closure, Elastic Wrists/Ankles, Attached Skid-Resistant Boots 25 Ca $ TY122S Large Serged Seams, Attached Hood, Front Zipper Closure, Elastic Wrists/Ankles, Attached Skid-Resistant Boots 25 Ca $ B12848 TY122S XLarge Serged Seams, Attached Hood, Front Zipper Closure, Elastic Wrists/Ankles, Attached Skid-Resistant Boots 25 Ca $ TY122S 2XLarge Serged Seams, Attached Hood, Front Zipper Closure, Elastic Wrists/Ankles, Attached Skid-Resistant Boots 25 Ca $ J10092 TY122S 3XLarge Serged Seams, Attached Hood, Front Zipper Closure, Elastic Wrists/Ankles, Attached Skid-Resistant Boots 25 Ca $ DuPont Personal Protection Disposable Basic Coveralls Collar - Open Wrists and Ankles - Elastic Waist - Serged Seams DuPont ProShield DuPont ProShield Basic, spunbond meltblown spunbond (SMS) garments, are made to the high quality standards you have come to expect from DuPont. ProShield Basic garments have been optimized for comfort, softness and breathability while enabling you to cut costs for disposable garments DuPont ProShield Basic disposable garments are designed for workers in a range of industries for nonhazardous dry particle applications. Garments are available in a variety of coverall styles in a choice of both, white and blue. Applications include: general maintenance, janitorial/ cleaning and other dirty work. Laydown collar, Open wrists, Open ankles, Serged seams White HNA# Part# Size Pkg. Qty. UoM Price V99585 PB120SWHMD Medium 25 Ca $49.25 V99584 PB120SWHLG Large 25 Ca $49.25 V99586 PB120SWHXL XLarge 25 Ca $49.25 V99587 PB120SWH2X 2XLarge 25 Ca $53.00 V99588 PB120SWH3X 3XLarge 25 Ca $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 47

50 DuPont Personal Protection Basic Coverall Elastic Wrists and Ankles DuPont ProShield DuPont ProShield Basic, spunbond meltblown spunbond (SMS) garments, are made to the high quality standards you have come to expect from DuPont. ProShield Basic garments have been optimized for comfort, softness and breathability while enabling you to cut costs for disposable garments DuPont ProShield Basic disposable garments are designed for workers in a range of industries for nonhazardous dry particle applications. Garments are available in a variety of coverall styles in a choice of both, white and blue. Applications include: general maintenance, janitorial/cleaning and other dirty work. Laydown collar Elastic opening for tighter fit at wrist Elastic opening for tighter fit at ankle w/ Seam Serged HNA# Part# Size Pkg. Qty. Color UoM Price V99604 PB125SBUMD Medium 25 Blue Ca $52.75 V99603 PB125SBULG Large 25 Blue Ca $52.75 V99605 PB125SBUXL XLarge 25 Blue Ca $52.75 V99606 PB125SBU2X 2XLarge 25 Blue Ca $55.25 V99607 PB125SBU3X 3XLarge 25 Blue Ca $58.50 V99611 PB125SWHMD Medium 25 White Ca $52.75 V99610 PB125SWHLG Large 25 White Ca $52.75 V99612 PB125SWHXL XLarge 25 White Ca $52.75 V99613 PB125SWH2X 2XLarge 25 White Ca $55.25 V99614 PB122SWH3X 3XLarge 25 White Ca $58.50 DuPont Personal Protection Basic Coveralls With Hood - Elastic Wrists and Ankles DuPont ProShield DuPont ProShield Basic, spunbond meltblown spunbond (SMS) garments, are made to the high quality standards you have come to expect from DuPont. ProShield Basic garments have been optimized for comfort, softness and breathability while enabling you to cut costs for disposable garments DuPont ProShield Basic disposable garments are designed for workers in a range of industries for nonhazardous dry particle applications. Garments are available in a variety of coverall styles in a choice of both, white and blue. Applications include: general maintenance, janitorial/cleaning and other dirty work. Comfort fit design based on extensive wearer input to provide our most comfortable garment design that: enables a greater range of movement while stretching and bending, provides a more tailored fit, offers reinforcement in high stress areas for fewer blowouts, utilizes a longer zipper for easier donning and doffing and an elastic waist to better position the garment. Attached hood with elastic around face opening Elastic opening for tighter fit at wrist Elastic opening for tighter fit at ankle Serged Seams HNA# Part# Size Color Pkg. Qty. UoM Price V99618 PB127SBUMD Medium Blue 25 Ca $55.75 V99617 PB127SBULG Large Blue 25 Ca $55.75 V99619 PB127SBUXL Xlarge Blue 25 Ca $55.75 V99620 PB127SBU2X 2XLarge Blue 25 Ca $59.25 V99621 PB127SBU3X 3XLarge Blue 25 Ca $62.75 V99625 PB127SWHMD Medium White 25 Ca $55.75 V99624 PB127SWHLG Large White 25 Ca $55.75 V99626 PB127SWHXL Xlarge White 25 Ca $55.75 V99627 PB127SWH2X 2XLarge White 25 Ca $59.25 V99628 PB127SWH3X 3XLarge White 25 Ca $62.75 Kimberly-Clark Professional Liquid & Particle Protection Coveralls With Blue Breathable Back KleenGuard* - A40 Front and sleeves are a breathable, microporous film laminate Meets ANSI/ ISEA Sizing Standard Better liquid barrier, better particulate barrier. NFPA 99 compliant antistatic material * Passes ASTM F1670 testing for penetration of blood and bodily fluids HNA# Part# Size Description Pkg. Qty. UoM Price BJ Small Zipper front, elastic wrists, ankles & hood, thumb holes 25 Ca $ BJ Medium Zipper front, elastic wrists, ankles & hood, thumb holes 25 Ca $ BJ Large Zipper front, elastic wrists, ankles & hood, thumb holes 25 Ca $ BJ XLarge Zipper front, elastic wrists, ankles & hood, thumb holes 25 Ca $ BJ XLarge Zipper front, elastic wrists, ankles & hood, thumb holes 25 Ca $ PRODUCTS ARE SUBJECT TO AVAILABILITY

51 DuPont Personal Protection Basic Coverall With Hood - Elastic Wrists - Att. Skid-Resistant Boots DuPont ProShield DuPont ProShield Basic, spunbond meltblown spunbond (SMS) garments, are made to the high quality standards you have come to expect from DuPont. ProShield Basic garments have been optimized for comfort, softness and breathability while enabling you to cut costs for disposable garments DuPont ProShield Basic disposable garments are designed for workers in a range of industries for nonhazardous dry particle applications. Garments are available in a variety of coverall styles in a choice of both, white and blue. Applications include: general maintenance, janitorial/cleaning and other dirty work. Attached hood with elastic around face opening Elastic opening for tighter fit at wrist Attached skid-resistant boots Serged Seams HNA# Part# Size Color Pkg. Qty. UoM Price V99592 PB122SBUMD Medium Blue 25 Ca $64.25 V99591 PB122SBULG Large Blue 25 Ca $64.25 V99593 PB122SBUXL XLarge Blue 25 Ca $64.25 V99594 PB122SBU2X 2XLarge Blue 25 Ca $68.00 V99595 PB122SBU3X 3XLarge Blue 25 Ca $72.25 V99598 PB122SWHMD Medium White 25 Ca $64.25 V99597 PB122SWHLG Large White 25 Ca $64.25 V99599 PB122SWHXL XLarge White 25 Ca $64.25 V99600 PB122SWH2X 2XLarge White 25 Ca $68.00 North by Honeywell Half Mask Respirators North 7700 Series MSA ALTAIR Single Gas Detector The North 7700 Series is the most comfortable half mask respirator available Low profile gives workers a wide field of vision and room for protective eyewear; its low inhalation and exhalation resistance makes breathing easier, leaving more energy for production 42CFR84 Approved, Meets OSHA Requirements North cartridges, filters, prefilters and filter covers must be ordered separately Silicone facepiece material- Wearer comfort, readily conforms to facial features, doesn't harden with age, easy to clean, durable, stands up to repeated cleanings better than any other facepiece material; resists distortion, ensuring a better fit, time after time 3 overlapping facepiece sizes. Good for largest number of respirator wearers HNA# Part# Size Style UoM Price L Large Respirator Half-Mask Ea $33.41 North by Honeywell P100 Particulates Filter Designed for superior lifespan patented sensors operate for over two years and high performance, the ALTAIR Single-Gas Detector is the smart choice for marketleading, cost-effective gas monitors. Features sensor options for carbon monoxide, hydrogen sulfide, and oxygen coupled with LED/audible/vibrating alarms. Superior dust/water protection, high RFI resistance, and one-button operation provide heightened safety, plus increased durability and ease-of-use. HNA# Part# Description UoM Price J ALTAIR: Hydrogen Sulfide H2S (Low: 10ppm, High: 15ppm) Ea $ % Minimum Filter Efficiency. Pkg. Qty. 2 HNA# Part# UoM Price P100 Pr $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 49

52 MSA Multigas Detector O2, LEL, CO, H2S ALTAIR 4X The ALTAIR 4X Multigas Detector surpasses industry standards in several crucial areas. Its four-year sensor life is 60% longer than the industry average, while its 24-hour run time exceeds the industry average by 71%. This versatile portable detector is a perfect match for industries ranging from fire fighting to welding, and its digital sensor output makes it less likely to suffer from RF interference. The unit features exclusive MotionAlert, which lets others know if the user has become immobile, and InstantAlert, a manual alarm that alerts others of potentially dangerous situations. This rugged unit is designed to withstand a drop of up to 20 feet and uses less than half as much calibration gas as the industry average. Dependable multigas detector tests for LEL, oxygen, carbon monoxide and hydrogen sulfide Economical construction saves users more than 50% on calibration gas, replacement sensors and maintenance Four-year sensor life means detector lasts 60% longer than the industry average Unit uses 50% less calibration gas per minute than the average detectors within the industry Two-tox CO/H2S sensor removes practically all cross-channel interference Large buttons and high-contrast screen make operation easy in low-light conditions Ribbed rubber housing provides secure grip and high durability Unit features 95+ db alarm and ultra-bright LEDs Exclusive end-of-sensor warning cautions user when unit's sensor needs to be changed MotionAlert option tells others that user has become immobile InstantAlert provides manual alarm to alert others of a dangerous situation HNA# Part# UoM Price Z Ea $1, MSA Multigas Detector LEL, O2, CO, H2S, and SO2 ALTAIR 5X The ALTAIR 5X Detector allows for an industry-first LEL, O2, CO, H2S, and SO2 60-second span calibration and 10-second bump test time. The ALTAIR 5X Detector is equipped with an internal integral pump The ALTAIR 5X Detector is powered by the fast MSA XCell Sensor family including the introduction of 3 new sensors. 4-year expected sensor life on LEL, O2, CO, H2S, SO2, IR, and standard 3-year instrument warranty. 3-year expected sensor life on NH3, Cl2, and standard 2-year warranty. MotionAlert feature - man-down alarm. InstantAlert feature - manual alarm The ALTAIR 5X Detector is durable, providing industry - leading impact resistance. HNA# Part# Display Description UoM Price Color Display Deluxe Kit Ea $2, MSA GALAXY GX2 Automated Gas Detector Test System Provides simple, intelligent testing and calibration of MSA ALTAIR and ALTAIR PRO Single-Gas Detectors and ALTAIR 4X and ALTAIR 5X Multigas Detectors. Easy-to-use automated test stand offers high performance as either stand-alone unit or integrated portable detector management system, enabling total data access and control of the MSA ALTAIR family Gas Detector fleet. New MSA Link Pro Software for proactive safety management; gas exposure alerts, direct data input, live filtering, test and exposure queries, collecting and printing reports. HNA# Part# Description UoM Price GALAX- YGX2,ALTAIR5/ Ea $2, X,1VALVE,NA GALAX- YGX2,ALTAIR4/ 4X,1VALVE,NA Ea $2, MSA Calibration Testing Gas Cylinders The gas mixture in calibration gas cylinders is certified to be prepared gravimetrically using NIST traceable weights. The lot number and nominal value of the gas constituents in volume, percent by mass, PPM, or volume is specified on the cylinder. HNA# Part# Description UoM Price GAS,58L,1.45% J CH4,15%O2,60P PM CO,20PPMH2S Ea $ MSA Gas Detectors Test System Regulators Used to ensure you receive the required flow of calibration gas for your application. Based on the cost-efficient design of its diffusion based gas detectors, MSA is able to use 0,25 lpm regulators. This save users money by delivering calibration test gas at a low rate of 0,25 lpm versus 0,50 lpm which is the market standard. For pumped instruments, the easy to use Gas Miser Demand Regulator is recommended which delivers the required gas flow rate automatically. HNA# Part# Description UoM Price H Demand, GAS MISER, Model RP Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

53 Miller by Honeywell Steel Harnesses DuraFlex Webbing AirCore MSA Full Body Harness Workman The most unique and innovative fall protection available, this lightweight full-body harness is designed with breathable, open-core padding technology that provides optimal air flow, while reducing heat and moisture entrapment, keeping a worker drier and cooler. The patented Miller DuraFlex stretchable webbing provides greater flexibility and increased comfort. The unique cam buckles on the shoulder straps make vertical webbing adjustment the easiest of any harness on the market. A new webbing design creates an original and vibrant style for easy identification and greater visibility Rated HNA# Part# Size Capacity AC-QC/UGN L/XL 400lbs Miller by Honeywell Personal Fall Limiters 400lb Capacity TurboLite Description UoM Price Quick-Connect chest and leg Ea $ First affordable alternative to shock-absorbing lanyards Extremely compact and lightweight (1.9 lbs. [.86 kg]) provides 6-ft. (1.8 m) working capacity lifeline; unit attaches directly to the harness back D-ring for greater mobility and versatility Engineered webbing for greater abrasion resistance and long service life High-strength, impact-resistant nylon housing for maximum durability Built-in swivel prevents lifeline from twisting Rated for up to a 400 lb. (181.4 kg) user Meets global standards for international companies; meets all applicable OSHA, ANSI A10.32 and Z359, and CSA standards TurboLite w/steel Twist-Lock Carabiner Locking Snap Hook end HNA# Part# Length Description UoM Price R39828 MFL-1-Z7/6FT 6' Steel Twist- Lock Carabiner Ea $ Quality, comfort, and value come together in the Workman line of products. Workman Full Body and Construction Harnesses feature lightweight components and durable webbing. Optimum quality at an economical price Yellow polyester webbing for increased visibility Color-contrasting thigh and torso straps simplify donning Choice of Qwik-Fit or tongue-buckle leg straps for easy adjustment Web retainer collars to keep excess webbing neat HNA# Part# Size Rated Capacity Straps UoM Price Q Standard 400lbs Qwik-Fit Ea $48.45 Q XLarge 400lbs Qwik-Fit Ea $47.52 BJ Super XLarge 400lbs Qwik-Fit Ea $43.95 Miller by Honeywell Personal Fall Limiter Class A - 400lb Capacity Turbo T-Bak The first and only retractable designed to tie-back anywhere along the lifeline. Cost-effective alternative to tie-back shock-absorbing lanyards. All-in-one, self-retracting lifeline/anchorage connector design reduces equipment required on the job site. Designed for anchoring below a user's harness back D-ring for greater safety. Integrated shock absorber especially designed for tie-back applications with load indicator device. Meets all applicable OSHA, ANSI, CSA and CE standards, including the ANSI Z359.1 requirement that states only 24-inches (.62m) or less of lifeline extends out of the housing when the unit is fully retracted. Miller D-ring or G2 Connectors easily adapts two Miller Turbo T-BAK PFLs for continuous 100% tie-off fall protection. Recommended Industries: Construction, Manufacturing, Oil/Gas and Utilities 400lb Capacity HNA# Part# Length Description UoM Price MFLT-2/7.5FT 7.5' Turbo T-BAK with a 17D-1 Steel Twist- Lock Carabiner Ea $ MSA Workman Mini Personal Fall Limiter 400lb Capacity Workman The premier option in MSA's line of self-retracting devices (SRDs) for users working at heights.the internal fast-acting pawl lock mechanism offers the most versatile, compact, self-retracting device on the market, allowing for increased user safety at lower heights. Fall limiter design stops a fall quickly, providing workers with the ability to tie off at lower levels below the D-ring. Housing design is compact and lightweight; users can replace their standard 6-ft. (1.8 m) energy-absorbing lanyards. The Workman Mini PFL is available in both single- and twin-leg, tie-back and non-tie-back configurations, at lengths of 6-ft. (1.8 m) and 9-ft. (2.7 m) working capacity. ANSI approved HNA# Part# Size Rated Capacity Type UoM Price BG ' 400lb Single-leg, AL36C aluminum snaphook Ea $ BG ' 400lb Single-leg, AL36CL Rebar aluminum snaphook Ea $ BG ' 400lb Twin-leg, AL36C aluminum snaphook Ea $ BG ' 400lb Twin-leg, AL36CL Rebar aluminum snaphook Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 51

54 MSA Safety Hats Full Brim V-Gard MSA Full Brim Hard Hats Fas-Trac Ratchet Suspension Skullgard Complete assembly hat and Fas-Trac ratchet suspension included Skullgard hats feature heavyduty construction for use in steel mills and other heavy industries where elevated temperatures are common. Meets or exceeds the applicable requirements for a Type l helmet (top impact) as outlined in ANSI Z , class G (electrical low voltage). Made in the USA Get full-brim protection against sun, rain and glare with durable full-brim hard hats. V- Gard protective hats from MSA consist of a polyethylene shell and suspension system working together as a protection system. The rigid shell is lightweight and balanced for all-day wearing comfort. The shell is one-piece injection-molded of high-density polyethylene and has a high dielectric strength. V-Gard headwear features advanced styling in hat style, with the hat available in one size - standard (6 1/2-8). Meets all applicable requirements of ANSI Z (Type I, Class E and G). Logo options available HNA# Part# Size Color Style Description UoM Price Standard (6¹ ₂"x8) MSA Safety Caps Staz-On & Fas-Trac Ratchet Suspension V-Gard White Full Brim Fas-Trac Ratchet Suspension Ea $19.42 HNA# Part# Size Color Style UoM Price MSA Fiberglass Safety Cap Fas-Trac Ratchet Suspension Skullgard Standard (6¹ ₂-8 ) Complete assembly hat and Fas-Trac ratchet suspension included Skullgard caps feature heavyduty construction for use in steel mills and other heavy industries where elevated temperatures are common Meets or exceeds the applicable requirements for a Type l helmet (top impact) as outlined in ANSI Z , class G (electrical-low voltage). Also meets ANSI/ISEA Z voluntary standard for reverse donning. Country of Origin: USA Natural Tan Full Brim Ea $ HNA# Part# Color Size Material UoM Price Natural Tan Standard (6¹ ₂-8 ) Fiberglass Ea $ Occunomix International MiraCool Cooling Pads For Hard Hats When you need strong, comfortable head protection, try V-Gard slotted caps on for size. V-Gard protective caps from MSA consist of a polyethylene shell and suspension system working together as a protection system. The rigid shell is lightweight and balanced for all-day wearing comfort. The shell is one-piece injection-molded of high-density polyethylene and has high dielectric strength. Meets all applicable requirements of Z (Type I, Class E and G). HNA# Part# Size Color Description UoM Price Standard (6¹ ₂"x8") White Fas-Trac Ratchet Suspension Ea $14.31 Pad fastens easily with hook and loop Air movement around suspension assists in the cooling effect Navy color HNA# Part# UoM Price Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

55 Occunomix International MiraCool Hard Hat Sun Shields Vulcan Occunomix International FR Hard Hat Pad w/shade HRC 1 Miracool Fits most hard hat. not full brim types Blocks sun and most UV rays Shade at back of neck facilitates perspiration evaporation Helps keep workers comfortable 80% Polyester/20% Cotton Twill HNA# Part# Color UoM Price BJ White Ea $6.60 Occunomix International Hard Hat Pad With Shade Miracool The same easy to insert top of head cooling effect as our popular MiraCool Hard Hat Pad #968 with the added benefit of a sun protecting neck shade 6 oz. Grey Flame Resistant treated cotton. 50 washes. Added neck shade facilitates evaporation Fastens with Hook & Loop Includes attached hard hat pad Meets ASTM F1506 Arc Rating: ATPV = 7.2 cal/cm2 NFPA 70E / HRC = 1 Logo'd with OCC skull logo HNA# Part# UoM Price BJ FR Ea $8.28 Occunomix International Welders Headwear Regular Tie Hat/Doo Rag Tuff Nougies 100% cotton fabric Rear ties for secure fit Double cotton layer around forehead for added comfort Available one size fits all Only sold in packs of 12. HNA# Part# Color UoM Price BJ3993 TN5-12 Assorted Dz $55.06 BJ3992 TN5-01 Navy Dz $55.06 Occunomix International Body Cooling Products Elastic Sweatbands Added neck shade facilitates perspiration evaporation. Hard hat pad fastens easly with Hook & loop HNA# Part# Color UoM Price Navy Ea $4.88 Occunomix International Stow-Away Hard Hat Shade Traditional absorbent cellulose sweatbands Just dip in cold water, squeeze out and wear Pre-moistened for softer feel Anti-mold treated HNA# Part# Pkg. Qty. UoM Price V15994 SBR Ca $40.00 Occunomix International PVA Cooling Towel Miracool Cotton with wire spring around rim (HI-VIZ is Polyester Oxford) Fits most hard hats including full brim Shade at back of neck facilitates perspiration evaporation Easily folds away into a convenient 6" circular self pouch HNA# Part# Color Description UoM Price Cotton with wire spring BJ HVYS Yellow Ea $8.78 around rim BJ4002 Cotton with wire spring White Ea $8.78 around rim Lightweight super absorbent material holds water without weighing you down. Instant cooling relief, just add water, reusable, easy to charge. Packaged in sport tube Machine Washable HNA# Part# Size UoM Price BH Blue 29.5 x14 Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 53

56 Occunomix International Knee Pads Premium Flat Cap Gel Pads - Black Hard PE Cap Occunomix International Back Supports Premium Lumbar - Black Ideal for working on hard surfaces, cement, roofs, driveways and cargo areas Gel-injected EVA foam padding to absorb impact and provide superior comfort Flat kneeling surface Polyester, Jersey and Neoprene fabrics Unique sizing pads assure customized fit Hook & loop neoprene split strap closure to avoid bunching and slipping HNA# Part# Size UoM Price Universal Pr $28.83 Occunomix International Knee Pads Value Contoured Hard Cap Heavy Duty Protection Ideal for most surfaces. Abrasion resistant and great for pivoting EVA foam padding provides support and protection PE plastic hard cap Durable polyester and tricot fabrics Hook & Loop closure HNA# Part# Size UoM Price V Universal Pr $11.49 Occunomix International Knee Pads Classic Fabric Cap Ideal for delicate surfaces Lightweight and comfortable High Density Foam Body Durable 600 Denier Polyester Hook & Loop closure 9" Power Knit Nylon / Elastic Body Lumbar Support Pad Double Hook & Loop closure system Detachable, 1.5 Wide Suspenders HNA# Part# Size UoM Price BJ3990 OK-1000S-BLK-S Small Ea $29.16 BJ3989 OK-1000S-BLK-M Medium Ea $29.16 BJ3987 OK-1000S-BLK-L Large Ea $29.16 BJ3991 OK-1000S-BLK-XL XLarge Ea $29.16 BJ3988 OK-1000S-BLK-2X 2XLarge Ea $29.16 BJ3986 OK-1000-BLK-3X 3XLarge Ea $29.16 Occunomix International Back Supports Classic Universal 9" Cool Mesh Body Double Hook & Loop closure system Detachable, 1.5 Wide Suspenders Rubber Grippers Help Keep Belt In Place One Size Fits Most (26-48 ) Black HNA# Part# UoM Price BJ3985 OK-UNIV Ea $19.14 HNA# Part# UoM Price BJ3984 OK-KP-350 Pr $11.62 Occunomix International Knee Pads Classic Cradle Technology Large Cap Contours to Patella High Density Foam Padding Elastic Strap with Hook & Loop Closure Occunomix International Back Supports Classic The Mustang Our Best Seller! The Mustang offers optimal comfort and fit 8-1/4 Breathable Polypropylene Mesh lumbar panel with solid elastic stretch panel 4 super memory plastic stays and 2 silicone Grip Strips to inhibit riding up. Stiffening mesh at abdominal closure reduces front rolling Attached suspenders Double hook & loop front closure HNA# Part# UoM Price BJ3983 OK-KP-210 Pr $14.62 HNA# Part# Size UoM Price BJ Small Ea $14.96 BJ Medium Ea $14.96 BJ Large Ea $14.96 BJ XLarge Ea $14.96 BJ XLarge Ea $16.45 BJ XLarge Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

57 Tingley Rubber Corporation Hooded Sweat Shirt ANSI/ISEA 107 Class 3, Level 2 ANSI/ISEA 107 Class 3 compliant sweatshirt for high visibility. Size small sweatshirts have fluorescent color pockets to meet ANSI 107 requirements. Fluorescent yellow-green background material for excellent daytime visibility. Hooded. 100% polyester (8.38oz.). 2 inch silver reflective tape reflects light 360. Zipper closure. 2 pockets. HNA# Part# Size Chest Dimension UoM Price Z10469 S78122SM Small 42" Ea $37.18 Z10468 S78122MD Medium 46" Ea $37.18 Z10467 S78122LG Large 50" Ea $37.18 Z10470 S78122XL XLarge 54" Ea $37.18 Z10471 S781222X 2XLarge 58" Ea $39.85 Z10472 S781223X 3XLarge 62" Ea $39.85 Z10473 S781224X 4XLarge 66" Ea $39.85 Z10474 S781225X 5XLarge 70" Ea $39.85 Tingley Rubber Corporation High Visibility Jackets ANSI/ISEA 107 Class 3, Level 2 Icon Polyurethane on 300 denier polyester. ANSI/ISEA 107 Class 3 compliant Jacket jacket for high visibility and breathability. Fluorescent yellow-green background material for excellent daytime visibility. 2 inch silver reflective tape reflects light 360. Waterproof and breathable, test method ASTM E96.. Roll-a-way adjustable hood in collar. D-ring access for fall protection harness. Mesh/taffeta lining for added comfort. Hand warmer side pockets with front cargo pockets and hook & loop closure. Convenient front radio pocket with exterior badge holder. Inner breast pocket with zipper closure. Elastic cuffs with hook & loop take-up straps on sleeves.. 2 Mic tabs. Jackets have inner attachment system to accommodate Phase 2, Phase 3 or black fleece jacket as a liner. HNA# Part# Size Chest Dimension UoM Price Q16215 J24122SM Small 44" Ea $73.49 Q16214 J24122MD Medium 48" Ea $73.49 Q16213 J24122LG Large 52" Ea $73.49 Q16216 J24122XL XLarge 56" Ea $73.49 Q16217 J241222X 2XLarge 60" Ea $76.92 Q16218 J241223X 3XLarge 64" Ea $76.92 T01003 J241224X 4XLarge 68" Ea $76.92 T01004 J241225X 5XLarge 72" Ea $76.92 Tingley Rubber Corporation Waterproof Breathable Pants Breathability ASTM E96 Icon 2 inch silver reflective tape reflects light 360. Breathable. Test Method ASTM E96. Stitched and taped sealed seams for 100% waterproof protection. Elastic waist pants with adjustable drawcord. Snap fly front. Side openings on pants with flap closure. Hook & loop take-up straps on ankle cuffs. HNA# Part# Size Waist UoM Price BH8720 P24123.SM Small 44" Ea $32.45 BH8719 P24123.MD Medium 47" Ea $32.45 BH8718 P24123.LG Large 50" Ea $32.45 BH8721 P24123.XL XLarge 53" Ea $32.45 BH8722 P X 2XLarge 56" Ea $35.38 BH8723 P X 3XLarge 59" Ea $35.38 BH8724 P X 4XLarge 62" Ea $35.38 BH8725 P X 5XLarge 65" Ea $35.38 Tingley Rubber Corporation 10" Work Rubber Overshoes Black Stretches easily over the bulkiest of work shoes. With its reinforced heel and toe, these work overshoes are designed to stand up to tough daily wear. That's why they are considered the industry standard. Ideal Applications: Food Processing, Transportation, Utilities, Construction, General Industry, Municipalities, and Agriculture. Chemical Resistance: Acids, alcohols, bases and diluted water solutions of most chemicals that are water soluble. Not recommended for constant contact with petroleum and oil based products. HNA# Part# Size Shoe Size UoM Price SM Small 6¹ ₂-8 Pr $27.03 R MD Medium 8-9¹ ₂ Pr $ LG Large 9¹ ₂-11 Pr $27.03 E XL XLarge 11-12¹ ₂ Pr $4.83 E X 2XLarge 12¹ ₂-14 Pr $27.03 T X 3Xlarge 14-15¹ ₂ Pr $27.03 Tingley Rubber Corporation 4" Work Rubber Overshoes Black Covers work shoes up to the ankle. Stretches easily over the bulkiest of work shoes. With its reinforced heel and toe, these work overshoes are designed to stand up to tough daily wear. That's why they are considered the industry standard. Ideal Applications: Food Processing, Transportation, Utilities, Construction, General Industry, Municipalities, and Agriculture. Chemical Resistance: Acids, alcohols, bases and diluted water solutions of most chemicals that are water soluble. Not recommended for constant contact with petroleum and oil based products. HNA# Part# Size Shoe Size UoM Price SM Small 6¹ ₂-8 Pr $ MD Medium 8-9¹ ₂ Pr $ LG Large 9¹ ₂-11 Pr $ XL XLarge 11-12¹ ₂ Pr $ X 2XLarge 12¹ ₂-14 Pr $20.06 J X 3XLarge 14-15¹ ₂ Pr $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 55

58 Wearwell Anti-Fatigue Mats Ultra-Soft Diamond Plate #414 Offers unmatched comfort provided by a double-thick Nitricell sponge base. Nitricell uses a PVC/Nitrile rubber blend with super resilience and immediate rebound. For use in all dry work areas, it enhances employee productivity, morale and physical well being. UltraSoft Diamond -Plate has a chemical and abrasion resistant, raised deck-plate surface for extra traction and optional colored borders for maximum safety awareness. All edges safety beveled. All Wearwell Diamond-Plate Mats feature a rugged, raised surface that s chemical resistant and self-extinguishing. The optional yellow borders define work areas and walkways. It s the sponge base that differentiates the Wearwell Diamond-Plate mats in terms of longevity and comfort Nitricell sponge base: a premium Nitrile rubber composite sponge formulated for crush-resistance and extended performance. Sponge extends to within 1 of the edge of the mat providing more standing room. Resilience: Best in its class because Nitrile additive causes it to continuously bounce back. Custom sizes & unique configurations are available. Please call for pricing. Warranty: 3 years, Green Rating: 50% Post Industrial Material/Post Consumer Material Thickness: 15/16 HNA# Part# Size Color UoM Price AD X2X3BK 2'x3' Black Ea $54.56 AD X2X3BYL 2'x3' Black/Yellow Ea $60.10 BJ x2x3CHV 2'x3' Black/Chevron Ea $62.39 BJ x2x3GY 2'x3' Gray Ea $58.88 V X3X5BK 3'x5' Black Ea $ AD X3X5BYL 3'x5' Black/Yellow Ea $ BJ x3x5CHV 3'x5' Black/Chevron Ea $ BJ x3x5GY 3'x5' Gray Ea $ Wearwell Diamond-Plate Select Safety Mats 495 Diamond-Plate Select is the mid-range offering within our most popular family of anti-fatigue mats. It is the Better version of our exclusive Good-Better-Best Diamond-Plate product line. Only Wearwell brings you a choice of Diamond-Plate solutions depending on your budget, durability requirements, level of customization, and sponge preference. Diamond- Plate Select features our Flex-Link sponge underlayment, a dense, closed-cell PVC foam designed to provide solid, stable anti-fatigue performance. Better sponge base HNA# Part# Size Thick Color UoM Price AD x2x3BYL 2'x3' ¹⁵ ₁₆" Black/Yellow Ea $43.17 AD x2x3BYL 2'x3' ⁹ ₁₆" Black/Yellow Ea $35.45 AD x3x5BYL 3'x5' ¹⁵ ₁₆" Black/Yellow Ea $ AD x3x5BYL 3'x5' ⁹ ₁₆" Black/Yellow Ea $81.59 Wearwell Diamond-Plate Select Safety Mats 495 Diamond-Plate Select is the mid-range offering within our most popular family of anti-fatigue mats. It is the Better version of our exclusive Good-Better-Best Diamond-Plate product line. Only Wearwell brings you a choice of Diamond-Plate solutions depending on your budget, durability requirements, level of customization, and sponge preference. Diamond- Plate Select features our Flex-Link sponge underlayment, a dense, closed-cell PVC foam designed to provide solid, stable anti-fatigue performance. Better sponge base HNA# Part# Size Thickness Color UoM Price AD x2x3BK 2'x3' ¹⁵ ₁₆" Black Ea $40.46 AD x2x3BK 2'x3' ⁹ ₁₆" Black Ea $33.61 AD x3x5BK 3'x5' ¹⁵ ₁₆" Black Ea $95.21 AD x3x5BK 3'x5' ⁹ ₁₆" Black Ea $81.93 Wearwell Diamond-Plate Mats SpongeCote All Wearwell Diamond-Plate Mats feature a rugged, raised surface that s chemical resistant and self-extinguishing. The optional yellow borders define work areas and walkways. It s the sponge base that differentiates the Wearwell Diamond-Plate mats in terms of longevity and comfort Nitricell sponge base: a premium Nitrile rubber composite sponge formulated for crush-resistance and extended performance. Sponge extends to within 1 of the edge of the mat providing more standing room. Resilience: Best in its class because Nitrile additive causes it to continuously bounce back. Custom sizes & unique configurations are available. Please call for pricing. Warranty: Lifetime, Green Rating: 50% Post Industrial Material/Post Consumer Material. Thickness: 9/16 HNA# Part# Size Color UoM Price X2X3BK 2'x3' Black Ea $43.66 AD X2X3BYL 2'x3' Black/Yellow Ea $40.58 BJ x2x3CHV 2'x3' Black/Chevron Ea $ x2x3GY 2'x3' Gray Ea $ X3X5BK 3'x5' Black Ea $ AD X3X5BYL 3'x5' Black/Yellow Ea $ BJ x3x5CHV 3'x5' Black/Chevron Ea $ x3x5GY 3'x5' Gray Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

59 Wearwell Safety Mats Smart Diamond Plate #497 All Wearwell Diamond-Plate Mats feature a rugged, raised surface that s chemical resistant and self-extinguishing. The optional yellow borders define work areas and walkways. It s the sponge base that differentiates the Wearwell Diamond-Plate mats in terms of longevity and comfort Recycled Urethane sponge base: crush-resistant and designed to be easy on the budget and the environment. The sponge extends to within 2 of each edge. Resilience: Much better than PVC sponge based products. Warranty: 1 year Available in a standard 5/8 thickness or UltraSoft 1 thickness. Custom cut lengths are available Green Rating: > 80% Post Industrial Material/Post Consumer Material HNA# Part# Size Color UPC UoM Price Z X2X3BK 2"x3' Black Ea $38.25 Z X3X5BK 3"x5' Black Ea $95.48 Z X3X5BYL 3"x5' Black w/yellow Border Ea $ Z X2X3BK 2"x3' Black Ea $30.63 Z X2X3BYL 2"x3' Black w/yellow Border Ea $32.76 Z X3X5BK 3"x5' Black Ea $69.96 Z X3X5BYL 3"x5' Black w/yellow Border Ea $76.04 Wearwell Diamond-Plate Spongecoat Safety Mats With Gritshield Diamond-Plate with GRITSHIELD combines productivity improvement with slip prevention in oily overspray applications. A GRITSHIELD enhanced PVC surface improves coefficient of friction by 60%, protecting team members from dangerous falls. The Nitrile enhanced Nitricell sponge absorbs repeated compression and bounces back to its original form better than any PVC sponge alternative. "Best" sponge base Machine cut and beveled edges prevent tripping The ONLY fully customizable Diamond-Plate matting product available 2X the resilience and 3X the life of look-alikes Maximized standing area HNA# Part# Size Thickness Color UoM Price BJ x2x3BK 2'x3' ¹⁵ ₁₆" Black Ea $92.21 Q x2x3BK 2'x3' ⁹ ₁₆" Black Ea $69.74 BJ x3x5BK 3'x5' ¹⁵ ₁₆" Black Ea $ Q x3x5BK 3'x5' ⁹ ₁₆" Black Ea $ Wearwell Rejuventor Domed Flooring Tile 503F Rejuvenator Flooring with domed (or "bubble") design, features large 3'x3' (91 cm x 91 cm) modules--and now new 1'x3' (30 cm x 91 cm) modules as well-- that interlock on all 4 sides to customize on-site virtually any flooring configuration. The interlock is incredibly effective--and also hidden--so the ergonomic floor you've created is seamless and stable underfoot. Having the ability to customize in 1 foot (30 cm) increments and finish off with beveled ramps [yellow or black] sets Rejuvenator Flooring apart from all other urethane "wannabees". Configure large areas quickly Deep Positive Lock keeps seams secure 100% Urethane with thick outer wear layer Customizable in 1 (30 cm) increments, Overall thickness 5/8 (16 cm) Lifetime warranty HNA# Part# Size Thickness Color UoM Price AD x1x3BK 1'x3' ⁵ ₈" Black Ea $64.10 AD x3x3BK 3'x3' ⁵ ₈" Black Ea $32.60 Wearwell Rejuventor Squared Runners 502R Rejuvenator Runners give you the option to create 2' (61 cm) and 3' (91 cm) wide runs of ergonomic matting...while matching the same clean aesthetic! Our 2'x5' (61 cm x 152 cm) and 3'x5' (91 cm x 152 cm) mats are available in Ends and Centers, so you choose the length of run you want. The molded-in ramps reduce installation time and costs because there is no edging to attach. It's all there, ready to go! Rejuvenator Runners proves the adage: often, the simplest solution is the best one. 100% Urethane with thick outer wear layer Deep Positive Lock keeps seams secure Quickly form endless lengths, Molded in safety bevels Meets USP 797 compliance standards Overall thickness 5/8 (16 mm) Lifetime warranty HNA# Part# Size Thickness Color Description UoM Price AD x2x5CBK 2'x5' ⁵ ₈" Black Center Ea $32.60 AD x3x5CBK 3'x5' ⁵ ₈" Black Center Ea $ AD x2x5EFBK 2'x5' ⁵ ₈" Black Female Ea $32.60 AD x3x5EFBK 3'x5' ⁵ ₈" Black Female Ea $ AD x2x5EMBK 2'x5' ⁵ ₈" Black Male Ea $32.60 AD x3x5EMBK 3'x5' ⁵ ₈" Black Male Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 57

60 Wearwell Rejuventor Domed Runners 503R Rejuvenator Runners with domed (or "bubble") design give you the option to create 2' (61 cm) and 3' (91 cm) wide runs of ergonomic matting...while matching the same clean aesthetic! Our 2'x5' (61 cm x 152 cm) and 3'x5' (91 cm x 152 cm) mats are available in Ends and Centers, so you choose the length of run you want. The molded-in ramps reduce installation time and costs because there is no edging to attach. It's all there, ready to go! Rejuvenator Runners proves the adage: often, the simplest solution is the best one. 100% Urethane with thick outer wear layer, Deep Positive Lock keeps seams secure Quickly form endless lengths, Molded in safety bevels Available in squared pattern, Overall thickness 5/8 (16 mm) Lifetime warranty HNA# Part# Size Thickness Color Description UoM Price BJ x2x5CBK 2'x5' ⁵ ₈" Black Center Ea $ BJ x3x5CBK 3'x5' ⁵ ₈" Black Center Ea $ BJ x2x5EFBK 2'x5' ⁵ ₈" Black Female Ea $ BJ X3X5EFBK 3'x5' ⁵ ₈" Black Female Ea $ BJ x2x5EMBK 2'x5' ⁵ ₈" Black Male Ea $ BJ X3X5EMBK 3'x5' ⁵ ₈" Black Male Ea $ Wearwell Anti-Fatigue Mats Rejuvenator Connect #502 The robust, abrasion resistant exterior skin totally encapsulates the resilient, crush-resistant urethane sponge interior creating a mat that is virtually indestructible. An elevated square-grid surface creates an appealing symmetrical look for industrial, laboratory, pharmaceutical or commercial environments. Ideal for mostly dry areas, Rejuvenator flooring is also very resistant to a wide variety of chemicals, and to a wide range of temperatures. These mats are 3 x 3 with an optional 2 wide urethane bevel for safe access. Color: Mat-Black (BK), Edging-Black (BK) or Yellow (YL). Rejuvenator flooring is made from 100% Urethane that provides an extremely comfortable feel. 5/8 thick and made from a closed-cell Urethane sponge surrounded by an abrasion-resistant Urethane exterior skin that is also exceptionally chemical resistant. Underside features textured Urethane which prevents the mat from slipping and enhances safety. Flammability A rating per MVSS 302. Modular with 4-sided connection that allows for a custom configuration. Optional beveled ramps are sold separately. HNA# Part# Size Color UoM Price AD x1x3BK 1'x3' Black Ea $64.10 AD X3X3BK 3'x3' Black Ea $ BJ X2X39MBK 2"x39" Male-Black Ea $33.58 BJ X2X39FBK 2"x39" Female-Black Ea $33.58 AD X2X39MYL 2"x39" Yellow Ea $32.60 AD X2X39FYL 2"x39" Yellow Ea $32.60 Wearwell Rejuventor Squared Workstation Mats 502M Rejuvenator WorkStation Mats provide an out-of-the-box anti-fatigue solution for workers who spend most of their shift standing at one station. Molded ramps on all 4 sides ensure safe on-off access. Same awesome aesthetics as all other Rejuvenator squared products, so your facility looks clean and consistent. 100% Urethane with thick outer wear layer Exceptional comfort and long-lasting performance Meets USP 797 compliance Overall thickness 5/8 (16 mm) Lifetime warranty HNA# Part# Size Thickness Color UoM Price AD x2x3BK 2'x3' ⁵ ₈" Black Ea $94.63 AD x2x5BK 2'x5' ⁵ ₈" Black Ea $ AD x3x5BK 3'x5' ⁵ ₈" Black Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

61 Wearwell Rejuventor Domed Workstation Mat 503M Rejuvenator Work Station Mats with domed (or "bubble") design provide an out-of-the-box anti-fatigue solution for workers who spend most of their shift standing at one station. Molded ramps on all 4 sides ensure safe on-off access. Same awesome aesthetics as all other Rejuvenator products, so your facility looks clean and consistent. 100% Urethane with thick outer wear layer Exceptional comfort and long-lasting performance Overall thickness 5/8 (16 mm) Lifetime warranty Wearwell Starting Line Runner 300 HNA# Part# Size Thickness Color UoM Price BJ x2x3BK 2'x3' ⁵ ₈" Black Ea $92.02 BJ x2x5BK 2'x5' ⁵ ₈" Black Ea $ BJ x3x5BK 3'x5' ⁵ ₈" Black Ea $ Put your Industrial Athlete on the Starting Line! Starting Line is one of a kind champion in anti-fatigue matting. The durable material joined with a specialized process makes it more resistant to wear and tear than conventional PVC sponge products, but at a comparable price. Fatigue-fighting domes compress underfoot, but bounce back time and time again. Incredible lightweight and flexible, even long lengths can be easily rolled up and rolled away for maintenance and handling. Starting Line is an excellent budget-friendly alternative or replacement for vulnerable sponge products. Domes nest for ease of combining mats together Resilient and tear resistant Can easily be cut to size on-site Overall thickness 3/8 (9 mm) Available in lengths up to 75' (22.86 meters) HNA# Part# Size Thickness Color UoM Price BK x3x75BK 3'x75' ³ ₈" Black Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 59

62 Justrite Sure-Grip EX Safety Cabinets 2 Door Manual & Self-Closing Door For Safe Flammable Liquid Storage Double wall, air insulated, welded construction. 3-point stainless steel bullet latches with U=LOC padlockable. SpillSlope safety shelves. Meets OSHA and NFPA 30 standards. FM Approved. Justrite Rigid-Lock QUICKBERM HNA# Part# Size Capacity Description UoM Price R "x43"x18" 30gl 2 Door Manual Closing, 1 Shelf Ea $ V "x43"x18" 45gl 2 Door Manual Closing, 2 Shelf Ea $ R "x34"x34" 60gl 2 Door Manual Closing, 2 Shelf Ea $1, R "x43"x34" 90gl 2 Door Manual Closing, 2 Shelf Ea $1, R "x43"x18" 30gl 2 Self Closing Doors, 1 Shelf Ea $ V "x43"x18" 45gl 2 Self Closing Doors, 1 Shelf Ea $1, R "x34"x34" 60gl 2 Self Closing Doors, 1 Shelf Ea $1, R "x43"x34" 90gl 2 Self Closing Doors, 1 Shelf Ea $1, Safe, drive-in spill containment for drums, IBC totes, and tanks Single-piece construction patented Rigid-Lock wall-support systemþintegral to berm provides unobstructed work space. Quick and easy setup no assembly required. DurableþEnGuard V, modified PVC coated fabric withstands long-term UV exposureþ great for outdoor use. Helps comply with EPA for containment and spill prevention (SPCC). Justrite Pop-Up Pool Spill Containment HNA# Part# Capacity Size UoM Price BC gal 4'x6'x12" Ea $ BC gal 4'x8'x12" Ea $ BC gal 6'x8'x12" Ea $ Economical emergency spill containment - simply unfold, shake from foam ring top, and place under leaking equipment Folds tightly and stows easily. Embedded foam ring top raises containment wall as fluid level increases. Helps comply with EPA for containment and spill prevention (SPCC). HNA# Part# Capacity UoM Price BC gal Ea $ BC gal Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

63 Justrite Maintenance Spill Berm Compact and flexible spill containment deploys instantlyþin the shop or field. No assembly required simply unfold and use. Encased urethane foam sidewalls offer easy roll-through access without the need for a ramp. Walls quickly spring back into place with no memory loss. Helps comply with EPA for containment and spill prevention (SPCC). Justrite Type I Safety Cans HNA# Part# Size UoM Price BC 'x2'x2" Ea $ BC 'x2'x4" Ea $ BC 'x4'x2" Ea $ BC 'x4'x4" Ea $ Fully compliant safety can with ergonomically counter balanced design for easy pouring with rounded, swinging comfort handle. Long-lasting, stainless steel flame arrester dissipates heat to prevent flashback ignition. Leak-proof positive pressure relief cap automatically vents to guard against rupture or explosion. Heavy-duty, 24 gauge galvanized steel body and handle with powder-coat paint finish. Meets OSHA and NFPA, FM Approved, UL/ULC Listed, CARB compliant and TUV certified. HNA# Part# Capacity Description Color UoM Price S gl Swing Handle Red Ea $35.56 S gl Swing Handle Red Ea $38.84 Justrite 5 Gallon Safety Can Type I - Yellow Justrite Pour Funnel Type 1 For Type 1 safety cans. Fully compliant safety can with ergonomically counter balanced design for easy pouring with rounded, swinging comfort handle. Long-lasting, stainless steel flame arrester dissipates heat to prevent flashback ignition. Leak-proof positive pressure relief cap automatically vents to guard against rupture or explosion. Heavy-duty, 24 gauge galvanized steel body and handle with powder-coat paint finish. Meets OSHA and NFPA, FM Approved, UL/ULC Listed, CARB compliant and TUV certified. HNA# Part# UoM Price G Y Ea $6.81 HNA# Part# Size UoM Price S x Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 61

64 Master Lock Laminated Steel Padlocks 5-Pin Cylinder Master Lock Laminated Steel Padlocks 4-Pin Cylinder No. 1 Ideal for harsh outdoor conditions - exclusive Pro Series Weather Tough cover protects lock from water, ice, dirt and grime ProSeries Padlocks are designed for Commercial/Industrial applications 2-3/8" heavy steel body withstands physical attack 1-3/8" shackle clearance, 3/8" diameter hardened boron alloy shackle for maximum cut resistance Dual ball locking mechanism resists pulling and prying High security, rekeyable 5-pin cylinder with spool pins is virtually impossible to pick Best Used For: Truck Doors Trailers, Vans & Moving Trucks Manufacturing Environments Industrial, Storefront & Business Gates HNA# Part# Shackle Clearance Keyed UoM Price H ³ ₈" Different Ea $ /4" wide laminated body for superior strength Hardened steel shackles for extra cut resistance Heavy-duty laminated steel cases 4-pin cylinder helps prevent picking Dual locking levers provide extra pry resistance 1000 Key Changes Shackle is 5/16" diameter HNA# Part# Shackle Clearance Keyed UoM Price ¹⁵ ₁₆" Different Ea $10.45 Master Lock Laminated Steel Padlock w/colored Bumper No. 3 Master Lock Laminated Steel Padlocks 4-Pin Cylinder No. 3 No. 3 padlock for use with lockout hasps to prevent accidental start up of equipment that is shut down for servicing and maintenance. Complies with OSHA rule for safety lockout. Laminated steel body is 1-9/16" wide with 5/8" horizontal shackle clearance. Steel shackle has 9/32" diameter with 3/4" vertical clearance. Keyed different. I.D. Tag optional. Hardened steel shackles and locking mechanisms resist tampering Heavy duty laminated steel case 4-pin locking mechanisms resist picking Body is 1-9/16" wide, providing 5/8" horizontal shackle clearance Shackle is 9/32" diameter HNA# Part# Color UoM Price GRN Green Ea $ RED Red Ea $ WHT White Ea $ YLW Yellow Ea $10.41 HNA# Part# Shackle Clearance Keyed UoM Price ³ ₄" Different Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

65 Master Lock Master Lock Combination Padlocks Brass Pin Tumbler Padlocks Laminated Steel 2" wide laminated steel body for superior strength Hardened boron alloy shackle for superior cut resistance Dual locking levers provide extra pry resistance Proprietary rustproofing for longer life 1 shackle clearance HNA# Part# Desc. UoM Price Keyed Different Ea $15.10 Master Lock American Padlock Aluminum 2" wide solid brass case for strength and weather resistance Hardened steel and brass shackles available Set-your-own combination convenience Resettable to allow for a personalized combination Shackle has 5/16" diameter HNA# Part# Shackle Clearance UoM Price " Ea $ LH 2¹ ₄" Ea $24.92 Master Lock Safety Padlocks Lockout/Tagout 411 Series 1-1/2" (3.8cm) wide anodized aluminum body, 1/4" (6mm) chrome plated, boron alloy shackle w/1-1/2" (3.8cm) clearance Anodized aluminum finish stays bright Corrosive resistant finish for tough environments High visibility color plus high security Keyed different 5-pin tumbler rekeyable cylinder HNA# Part# Shackle Clearance Color UoM Price BK0012 A1106BLK 1¹ ₂" Black Ea $11.75 E65590 A1106BLU 1¹ ₂" Blue Ea $11.75 BK0013 A1106BRN 1¹ ₂" Brown Ea $ A1106GRN 1¹ ₂" Green Ea $14.16 BK0014 A1106ORJ 1¹ ₂" Orange Ea $11.75 BK0015 A1106PRP 1¹ ₂" Purple Ea $ A1106RED 1¹ ₂" Red Ea $14.16 BK0016 A1106YLW 1¹ ₂" Yellow Ea $ /2" (3.8cm) wide 3" (7.6cm) tall Zenex body, shackle w/1-1/2" (3.8cm) clearance Designed exclusively for Lockout/Tagout applications Durable, lightweight, non-conductive Zenex lock body Customize on-site with permanent, write-on labels Over 40,000 available key changes, minimize key duplication risks on job sites Compliance with OSHA "one employee, one lock, one key" directive High security, reserved-for-safety cylinder Key retaining-ensures that padlock is not left unlocked Keyed different 6-pin tumbler cylinder HNA# Part# Shackle Clearance Color UoM Price BLK 1¹ ₂" Black Ea $ BLU 1¹ ₂" Blue Ea $ GRN 1¹ ₂" Green Ea $14.84 BK ORJ 1¹ ₂" Orange Ea $ PRP 1¹ ₂" Purple Ea $ RED 1¹ ₂" Red Ea $14.84 BK TEAL 1¹ ₂" Teal Ea $ YLW 1¹ ₂" Yellow Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 63

66 Master Lock Lightweight Safety Lockouts 1-1/2" Keyed Different Master Lock Padlock Station 10 Zenex Padlocks Designed exclusively for lockout/tagout. Designed by Safety Directors specifically for OSHA lockout compliance Durable, lightweight, non-conductive Zenex lock body Customize on-site with permanent, write-on labels Compliance with OSHA "one employee, one lock, one key" directive High security, reserved-for safety cylinder - over 40,000 key changes available Key retaining - ensures that padlocks are not left unlocked Photo I.D. labels, laser engraving and key charting services available Keyed different HNA# Part# Color UoM Price RED Red Ea $ BLK Black Ea $ BLU Blue Ea $ GRN Green Ea $ ORJ Orange Ea $ YLW Yellow Ea $11.29 Master Lock Safety Lockout Hasps For Up To 6 Locks Safety Lockout covered padlock station with 10 of the 410RED Zenex padlocks, keyed different # Also contains hasps and 2 bags (12/bag) of the 497A tags Exclusive lockable translucent cover protects contents from dust and grime and ensures the lockout padlocks are there when you need them Resilient polycarbonate material provides twice the heat resistance and quadruple the impact strength of typical stations One piece molded construction means no glued hanger clips or tag pockets to ever come loose Reinforced snap-on clips provide easy padlock and hasp storage and removal Zenex padlock includes front and rear labels in English, Spanish and French Station measures 15-1/2" high x 22" wide x 1-3/4" deep Includes a no-charge Safety Lockout Padlock Key Charting System - simply return the enclosed mail-in card after your purchase. Master Lock will supply a Registered System number, maintain a record of the padlock key cuts provided with your station and ensure that there is no duplication on your future orders of safety padlocks. Preventing key duplications in your lockout programs is critical HNA# Part# UoM Price BK BP410 Ea $ Master Lock Padlock Station 4 Zenex Padlocks Tamper-resistant scissor-style steel lockout hasp Allows for lockout by up to 6 workers Compatible with Nos. 3, 410, 411 and 6835 safety lockout padlocks HNA# Part# Jaw Diameter UoM Price " Ea $5.75 Safety Lockout covered padlock station with 4 of the 410RED Zenex padlocks, keyed different # Also contains hasps and 1 bag (12 tags) of the 497A tags Exclusive lockable translucent cover protects contents from dust and grime and ensures the lockout padlocks are there when you need them Resilient polycarbonate material provides twice the heat resistance and quadruple the impact strength of typical stations One piece molded construction means no glued hanger clips or tag pockets to ever come loose Reinforced snap-on clips provide easy padlock and hasp storage and removal Zenex padlock includes front and rear labels in English, Spanish and French Station measures 12-1/4" high x 16" wide x 1-3/4" deep Includes a no-charge Safety Lockout Padlock Key Charting System - simply return the enclosed mail-in card after your purchase. Master Lock will supply a Registered System number, maintain a record of the padlock key cuts provided with your station and ensure that there is no duplication on your future orders of safety padlocks. Preventing key duplications in your lockout programs is critical HNA# Part# UoM Price J BP410 Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

67 Streamlight The Seige AA Alkaline Work Lantern Magnetic Base Streamlight Propolymer Dualie Laser LED Flashlight Laser - Intrinsically - Safe Multi-Function Polycarbonate thermoplastic construction with elastomer over mold. Rubber molded base provides stability on slippery or uneven surfaces. Output/Run time: White C4 LED: High for brightest light: 200 lumens; runs 7 hours. Medium for bright light and longer run times: 100 lumens; runs 15.5 hours. Low 50 lumens; runs 37 hours. Red Light (Two red LEDs): Red LED High (night vision preserving mode): 0.7 lumens; runs 192 hours (8 days). Flash SOS mode for emergency signaling: runs 288 hours (12 days). Uses three AA alkaline batteries (sold separately). Three magnets at base of lantern grab onto steel surfaces for hands-free use Removable, polycarbonate cover provides soft, even 360 light distribution. Incorporated D-ring on bottom of lantern to hang it; spring-loaded to stow against the light. Ergonomic handle designed to lock in upright or stowed position; incorporated hook allows for hanging on an edge, rope, cables or pipes IPX7 waterproof to 1m submersion; it floats; 2m impact resistance tested RoHS compliant Impact and chemical resistant engineering polymer resin; o-ring sealed and vented. One White C4 LED, with a 50,000 hour lifetime; One red laser, 640nm - 650nm. Three output modes: Spot, laser, both (spot beam and laser simultaneously): Spot: 150 lumens; 7,700 candela; 175m beam distance; runs 17 hours. <5mW Red Laser: runs 70 hours. Simultaneous spot beam and laser: runs 12 hours. Simultaneous spot beam and laser pointer allow you to illuminate your work area and pinpoint out-of-reach objects. Three AA alkaline (included) or lithium primary batteries. Rugged, integrated, snag-free clip conforms to body of light. Polycarbonate facecap and side lens. IPX7 rated; waterproof to 1 meter for 30 minutes. Approvals Class I, II, Division 1, Groups A, B, C, D, E, F, G; Class III; CL I, ZN 0, IIC; Exia; T-Code: T4. HNA# Part# Color Batteries/Size UoM Price BJ Yellow Lithium Or AA Ea $48.71 Streamlight ProTac HL 3 High Lumen Professional LED Flashlight HNA# Part# UoM Price BJ Ea $36.88 Streamlight Propolymer Dualie LED Flashlight Intrinsically Safe - Multi-Function Impact and chemical resistant, o-ring sealed and vented. Two White C4 LEDs, impervious to shock with a 50,000 hour lifetime. Three output modes: Spot, flood, both (spot and flood simultaneously): Spot: 140 lumens; 7,300 candela; 171m beam distance; runs 18 hours. Flood: 140 lumens; 80 candela; 18m beam distance; runs 18 hours. Simultaneous spot beam and flood beam: 245 lumens; runs 9 hours. Flood beam produces a soft, wide beam to illuminate your work area. Three AA alkaline (included) or lithium primary batteries. Rugged, integrated, snag-free clip conforms to body of light. Polycarbonate facecap and side lens IPX7 rated; waterproof to 1 meter for 30 minutes. Class I, II, Division 1, Groups A, B, C, D, E, F, G; Class III; CL I, ZN 0, IIC; Exia; T- Code: T4. Machined aircraft aluminum with anodized finish. Glass lens with anti-reflective coating. C4 LED technology with a 50,000 hour lifetime. Output/Runtime: High for maximum illumination: 1,100 lumens; 36,000 candela; 379m beam; runs 2 hours. Low a less intense beam and longer run time: 35 lumens; 1,200 candela; 69m beam; runs 43 hours. Strobe for disorienting or signaling: runs 2 hours. Multi-function, push-button tactical tailswitch facilitates one-handed operation. Three 3V CR123A lithium batteries (included). IPX7; waterproof to 1 meter for 30 minutes. Nylon holster included. RoHS compliant. HNA# Part# Color Batteries/Size UoM Price C Black CR123A Ea $ HNA# Part# Color Batteries/Size UoM Price BJ Yellow Lithium Or AA Ea $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 65

68 Streamlight Stylus Pro USB Rechargeable LED Penlight Anodized aluminum construction. White C4 LED, with a 30,000 hour lifetime. Push button tail switch momentary or constant on operation. Lithium ion battery rechargeable up to 300 times; fully charges in 2.5 hours. Charges via USB port or AC wall adapter. IPX4 water-resistant; 1 meter impact resistance tested. HNA# Part# Color Batteries/Size UoM Price E Black Lithium Ea $62.62 Streamlight Double Clutch USB LED Headlamp Polycarbonate construction with polycarbonate lens. C4 LED with spot and flood beams both with high and low modes; remembers the last mode used when you turn it back on. Spot beam for distance lighting: High/Spot: 125 lumens; 1,700 candela; 82m beam; runs 3.5 hours (lithium polymer); 6 hours (alkaline0. Low/Spot run time: 30 lumens; 400 candela; 40m beam; runs 10 hours (lithium polymer); 18 hours (alkaline). Flood beam for work at arm s length: High/Flood: 125 lumens;,250 candela; 31m beam; runs 3.5 hours (lithium polymer); 6 hours (alkaline). Low/Flood run time: 30 lumens; 70 candela; 4m beam; runs 10 hours (lithium polymer); 18 hours (alkaline). Dual-fuel: Powered by USB rechargeable lithium polymer battery; also accepts three AAA alkaline or lithium back-up batteries. 60 tilting head. No Includes USB cord. Adjustable elastic and hard hat straps. HNA# Part# Color Batteries/Size UoM Price BJ Yellow Lithium Or AAA Ea $59.14 TB Yellow AAA Only Ea $40.36 Sqwincher Lite Electrolyte Drinks Single Serving Fast Pack Lite Sqwincher "Lite" is a perfect solution for diabetics or anyone who monitors their overall daily intake of carbs and calories. Sqwincher "Lite's" formulation contains the same electrolyte content as regular Sqwincher, (high in potassium and low in sodium to aid the body in replenishing essential elements lost to heat stress and fatigue), but contains zero calories and zero carbs. Unique Sqwincher Fast Pack "Lite" single-serving package eliminates the need for cups - each foil package is its own cup! Simply add water to the liquid concentrate inside to make a 6-ounce single serving. Fast Pack "Lite" easily fits in a pocket, lunch box or glove box. Packed 50/box, 4 boxes/case. HNA# Part# Flavor Pkg. Qty. UoM Price T OR Orange 200 Ca $62.00 T FP Fruit Punch 200 Ca $ PRODUCTS ARE SUBJECT TO AVAILABILITY

69 Sqwincher Lite Electrolyte Drinks 20oz Yield Qwik Stik "Lite" Sqwincher Electrolyte Drink Single Serving Sqwincher Fast Pack Sqwincher "Lite" is a perfect solution for diabetics or anyone who monitors their overall daily intake of carbs and calories. Sqwincher "Lite's" formulation contains the same electrolyte content as regular Sqwincher, (high in potassium and low in sodium to aid the body in replenishing essential elements lost to heat stress and fatigue), but contains zero calories and zero sugar. None...nada...Zilch! Just tear open the handy pouch, add to your favorite 20 oz. bottled water, shake the bottle gently and enjoy all the benefits of Sqwincher "Lite". 500 pouches per Case packed in 10 bags of 50 pouches per bag. Unique Sqwincher Fast Pack single-serving package eliminates the need for cupseach foil package is its own cup! Simply add water to the liquid concentrate inside to make a 6-ounce single serving. Fast Pack easily fits in a pocket, lunch box or glove box. HNA# Part# Flavor Pkg. Qty. UoM Price T MB Mixed Berry 200 Ca $68.00 V GR Grape 200 Ca $68.00 V OR Orange 200 Ca $68.00 V FP Fruit Punch 200 Ca $68.00 V LL Lemon-Lime 200 Ca $68.00 Sqwincher Electrolyte Drink Mix Powder Powder Pack HNA# Part# Flavor Pkg. Qty. UoM Price V LA Lemonade 500 Ca $ V PT Peach Tea 500 Ca $ V RB Raspberry 500 Ca $ B LL Lemon-Lime 500 Ca $ Sqwincher Electrolyte Drinks Sqweeze Freezer Pops Sqwincher Powder Pack is scientifically formulated to replace important mineral salts through fluids which are lost due to various causes of dehydration. Helps to sustain worker performance and deter mental apathy. Next time you reach for frozen refreshment, don't just settle for mere flavored ice, protect the body from heat stress and fatigue while enjoying the great taste of 3oz. Sqwincher Sqweeze electrolyte replenishing freezer pops! Assorted flavors: orange, lemon-lime, grape, mixed berry or cherry HNA# Part# Flavor Pkg. Qty. UoM Price G Assorted 150 Ca $45.91 HNA# Part# Flavor Yield Pkg. Qty. UoM Price FP Fruit Punch 1gl 80 Bx $ OR Orange 1gl 80 Bx $ LL Lemon-Lime 1gl 80 Bx $ OR Orange 2.5gl 32 Ca $ B FP Fruit Punch 2.5gl 32 Ca $ LL Lemon-Lime 2.5gl 32 Ca $ V GR Grape 2.5gl 32 Ca $ J CH Cherry 2.5gl 32 Ca $ V MB Mixed Berry 2.5gl 32 Ca $ J CC Cool Citrus 2.5gl 32 Ca $ V AS Assorted Packages 2.5gl 32 Ca $ T OR Orange 5gl 16 Ca $ T GR Grape 5gl 16 Ca $ LL Lemon-Lime 5gl 16 Ca $ J TC Tropical Cooler 5gl 16 Ca $ J LA Lemonade 5gl 16 Ca $ WAYS TO ORDER: CALL ONLINE: HAGEMEYERNA.COM - CONTACT YOUR LOCAL SALES REP 67

70 Sqwincher Electrolyte Drink Liquid Concentrate Sqwincher has served industrial workers since 1975, offering better taste, superior composition and an optimal balance of electrolytes (lower sodium, higher potassium). Sqwincher Liquid Concentrate does not require mixing or stirring - mixes instantly upon contact with water. No product waste - no sticky residue left on the bottom of the cooler. Sqwincher Electrolyte Drink Coolers HNA# Part# Flavor Yield UoM Price V LL Lemon-Lime 2.5gl Ea $5.51 V FP Fruit Punch 2.5gl Ea $5.51 V OR Orange 2.5gl Ea $5.51 V MB Mixed Berry 5gl Ea $11.34 V CH Cherry 5gl Ea $11.34 V GR Grape 5gl Ea $11.34 V LA Lemonade 5gl Ea $ OR Orange 5gl Ea $ FP Fruit Punch 5gl Ea $11.34 V LL Lemon-Lime 5gl Ea $11.34 V TC Tropical Cooler 5gl Ea $11.34 Coolers come with 1/4 turn lid, high-density plastic handles, cup dispenser mount and spigot. Increased headspace for ice keeps products colder longer. HNA# Part# Capacity UoM Price gl Ea $ PRODUCTS ARE SUBJECT TO AVAILABILITY

71 ALL SUITS LOOK THE SAME, BUT ONLY TYVEK MAKES THE DIFFERENCE. All suits might appear the same, but only ours stands out where you need it most on the job. DuPont Tyvek an ideal balance of protection, durability and comfort. For more information call or visit hagemeyerna.com Copyright 2016 DuPont. All rights reserved. The DuPont Oval Logo, DuPont and Tyvek are trademarks or registered trademarks of E.I. du Pont de Nemours and Company or its affiliates.

72 3 Easy ways to order: CALL ONLINE CONTACT Your Local Sales Representative WITH A NEW LOOK AND FEEL, FINDING WHAT YOU NEED IS NOW EASIER THAN EVER. SHOP HAGEMEYERNA.COM TODAY! Copyright 2016 HagemeyerNA All Rights Reserved Printed in USA This information is provided as is without warranty of any kind. All prices and specifications are subject to change without notice.