TO ORDER CALL: OR FAX: GROUNDING. Custom Assemblies Available.
|
|
- Stephany Carr
- 5 years ago
- Views:
Transcription
1 SETS & SUPPORT BAR 354 Plated Copper Bar REL-GSB Pole Mounted Cluster Ground Support Bar Custom Assemblies Available. Tested to ASTM F855 Grade 5 Continuous Current: 400 Amps Fault Current - 15 cycles: 43,000 Amps Fault Current - 30 cycles: 30,000 Amps Penetrating Spike SET FOR OVERHEAD DISTRIBUTION #2 Set = GSOD60X#2 1/0 Set = GSOD60X1/0 2/0 Set = GSOD60X2/0 4/0 Set = GSOD60X4/0 Includes: (10) Clamp R-GC-1002 (1) Ground Support Bar REL-GSB (1) Screw Ground Rod R-T-GRND (3) Hanger Stud (10) Ferrules & Heatshrink (1) Carry Bag 2629 (60) Ground Cable Yellow Jacketed: (3) x 6 ft. (1) x 12 ft. (1) x 30 ft. Other custom options available. REL-GSB POLE MOUNTED GROUND SUPPORT BAR Hang grounding sets to facilitate lifting of clamps to the conductors Accepts C type and duckbill grounding sets Copper support bar is 11" wide by 4-1/4" deep A Cluster Bar is specified by OSHA as an approved component of equipotential zone grounding systems Weight: 11 lbs. REL-GSB-S POLE MOUNTED GROUND SUPPORT BAR WITH PENETRATING SPIKE Penetrate pole to a depth greater than climbers gaff. (Ref. OSHA Guideline App C) Hang grounding sets to facilitate lifting of clamps to the conductors Accepts C type and duckbill grounding sets Copper support bar is 11" wide by 4-1/4" deep A Cluster Bar is specified by OSHA as an approved component of equipotential zone grounding systems Weight: 11 lbs. Chain Pin REL-GSB-S Pole Mounted Ground Cluster Support Bar with Pole Spike Chain Tension Assembly QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
2 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION ELBOW SET (LOAD BREAK) Includes: 6 ft. 1/0 Yellow Jacketed Cable with elbow (select kv) Bronze "C" Style Clamp R-BGC-.81 Fault Current: 10, Cycles ELBOW SETS CABLE SIZE SINGLE PHASE (6') THREE PHASE (3X6') 15kV GES6X1/0-15KV GETS6X1/0-15KV 25kV 35kV (Small Interface) GES6X1/0-25/35SKV GETS6X1/0-25/35SKV 35kV (Large Interface) GES6X1/0-35LKV GETS6X1/0-35LKV Three Phase Sets Also Available. GES6X1/0-15KV BUSHING SET (LOAD BREAK) Includes: 4 ft. 1/0 Yellow Jacketed Cable w/ bushing (select kv) Bronze "C" Style Clamp R-BGC-.81 Fault Current: 10, Cycles BUSHING SETS CABLE SIZE SINGLE PHASE (4') THREE PHASE (3X4') 15kV GBS4X1/0-15KV GBTS4X1/0-15KV 25kV 35kV (Small Interface) GBS4X1/0-25/35SKV GBTS4X1/0-25/35SKV GBS4X1/0-15KV GROUND SETS FOR LIVE-FRONT SWITCHES & TRANSFORMERS Fault Rating: 21, Cycles GC6X1/0-FC Includes: 4 x 6 ft. 1/0 Clear Cable 4-way Terminal 3 x G33633SJ Al Flat Clamps with Bronze Eyescrew 1 x G33634SJ Al Flat Clamp with Bronze T-Handle GC6X1/0-81 Includes: 3 x 6 ft. 1/0 Clear Cable 3-way Terminal 4 x Bronze "C" Clamps R-BGC-.81 SETS GC6X1/0-BC Includes: 3 x 6 ft. 1/0 Clear Cable 3-way Terminal 4 x Bronze Ball Socket Clamps R-BS-GC GC6X1/0-81 GC6X1/0-BC 355
3 SETS Ground Adapter Device Kit EB100615LB S GROUND ADAPTER DEVICE KIT The Ground Adapter Device Kit enables application of personal grounds up to a 600 amp separable pre-molded component system when used with a clampstick. MODEL DESCRIPTION QUANTITY WEIGHT 44C Ratchet Wrench w/ Ball & Ring 1 2 lbs. 5900Q Universal Toggle & Spring 1 1 lb. 5900CS Captured Socket w/ Friction Balls 1 8 oz. 9206GAS Elbow Connector Tool w/ Inserts lbs Ground Stud lbs. B1715 Protective Bag w/ Zipper 1 1 lb. SINGLE GROUNDED BUSHING SET The Single Grounded Bushing Set is a single lead made from 6 feet of 1/0 cable. The bushing set consists of 3 bushing assemblies connected together with 3-foot leads to a common connection, and 10 feet from common connection to ground. The conductor is made of 1/0 clear jacketed copper stranded cable. The ground clamp can be applied with a clampstick. Sets come complete with bag; single leads do not. All sets are rated for 10 ka for 10 cycles. Other lengths and configurations are available. MODEL DESCRIPTION WEIGHT EB Dead Break, Single, 15 kv 8 lbs. EB Dead Break, Set, 15 kv 20 lbs. EB100615LB Load Break, Single, 15 kv 9 lbs. EB100625LB Load Break, Single, 25 kv 22 lbs. EB LB Load Break, Set, 15 kv 10 lbs. EB LB Load Break, Set, 25 kv 23 lbs. 200 AMP GROUND BUSHINGS WITH CONNECTIONS Ground Bushings with Connections (parking stands for J boxes or padmounts) provide a safe, convenient ground for elbows and a positive test to ensure a de-energized elbow. MODEL DESCRIPTION WEIGHT SO Dead Break, 15 kv 1 lb LSO Load Break, 15 kv 2 lbs LSO Load Break, 25 kv 4 lbs. ELBOW SET The Elbow Grounding Set includes a single lead made from 6 feet of 1/0 cable. This set consists of 3 elbow assemblies connected together with 3-foot leads to a common connection, and 10-feet from a common connection to ground. The conductor is made of 1/0 clear jacketed copper stranded cable. A ground clamp can be applied with a clampstick. Sets are rated for a maximum fault current of 10,000 amps for 10 cycles. Sets come complete with bag; single leads do not. Other lengths and configurations are available. 356 MODEL DESCRIPTION WEIGHT ES Single, 15 kv 1 lb. ES100615LB Load Break, 15 kv 2 lbs. ES100625LB Load Break, Single, 25/35 kv 4 lbs. ES Dead Break, Set, 15 kv 2 lbs. ES LB Load Break, Set, 15 kv 4 lbs. ES LB Load Break, Set, 25/35 kv 2 lbs. ES1LY635 Load Break, Single, 35 kv 4 lbs. QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION ES3LY635 Load Break, Set, 35 kv 2 lbs.
4 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION R-T-GRND MODEL DESCRIPTION WT. R-T-GRND Screw Ground Rod 7.75 lbs. R-T-GRND is comparable to Chance G3370. Truck-grounding set available, ask your Reliable representative for information. TGK500X#2 TRUCK SET Provides means to drain off capacitance or static charges For winch trucks and aerial devices Flat -face clamp is for secure attachment to the truck bed at an area cleaned for electrical contact C-type clamp is for secure attachment to ground rod NOTE: A truck grounding set should not be considered an adequate method of protection to personnel against conductor contact. TRUCK SET CONSISTS OF MODEL DESCRIPTION QUANTITY R-T-GRND Screw Ground Rod 1 R-BFC " Flat Face Ground Clamp 1 R-GC-1.25B 1.25" C-Type Ground Clamp 1 #2YGC #2 Copper Grounding Cable 50 feet R#2TF *Shrouded Alum. Ferrules 2 C Storage Reel 1 SGCR SPRING REWIND REEL Independently tested to 43 kva for 30 cycles Helps meet OSHA requirements for vehicle grounding Fast, convenient, automatic spring rewind Ratchet mechanism locks the reel Built-in cable hoop Internal rotary device Dimensions: in. H x 16.5 in. W x in. D TEMPORARY GROUND ROD The Reliable Screw Ground Rod provides a temporary ground where a system ground is not available. When installed, the 6' spiraled ground rod develops less resistance than straight ground rods. The reusable Ground Rod is copper clad. The helix (spiral), handle, and wing nut are bronze. TGK500X#2 Truck Grounding Set TRUCK MODEL REEL CAPACITY SIZE LENGTH WEIGHT SGCR #2 75 ft. 43 lbs. SGCR /0 75 ft. 43 lbs. SGCR /0 65 ft. 43 lbs. SGCR Spring Rewind Grounding Reel 357
5 CLAMPS AVAILABLE FROM RELIABLE R-GC-2.5A C TYPE (THREADED) Aluminum Body Smooth Jaws Capacity: 2.4" # 6-2 IPS ASTM: Type I / Class A / Grade 5H Salisbury 1923 R-BGC-1.25 C TYPE (THREADED) Bronze Body Smooth Jaws Capacity: 1.25" # KCM ACSR ASTM: Type I / Class A / Grade 5 Salisbury 1897 Chance C CLAMPS 358 R-GC-2AC R-GC-2BC Threaded Through Connection R-GC-2A OR 2B (SHOWN) C TYPE (THREADED) Aluminum Body (B) Serrated (A) Smooth Jaws Capacity: 2" # KCM ACSR ASTM: Type I / Class B / Grade 5H (See also R-GC-2AC & 2BC models) Salisbury Chance T Hastings R-GC-1002 C TYPE (THREADED) Aluminum Body Serrated Jaws Capacity: 1.5 # KCM ACSR ASTM: Type I / Class B / Grade 5 Salisbury 1895 Hastings R-GC-1.25B C TYPE (THREADED) Aluminum Body Serrated Jaws Capacity: 1.25" # kcmil ACSR ASTM: Type I / Class B / Grade 5 Chance T R-BGC-.81 C TYPE (DRILLED) Bronze Body Smooth Jaws Capacity:.81" # KCM ACSR Current: 250 RMS Amps / 60 Hz ASTM: Type I / Class A / Grade 2 Chance T R-BFC-1.5 FLAT (THREADED) Bronze Body Serrated Jaws Capacity: 1.5 ASTM: Type III / Class B / Grade 5 (See also R-BFC-1.5E w/ Eye Screw) Chance C & C Hastings R-FC-1006 FLAT (THREADED) Bronze Body Serrated Jaws Capacity: 1.5 Flat or Square Current: 300 RMS Amps / 60 Hz ASTM: Type III / Class B / Grade 3 (See also R-FC-1006E w/ Eye Screw) Salisbury 1814 In an effort to fill the needs of a changing utility market Reliable continues to release new clamp designs regularly. QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
6 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION CLAMPS AVAILABLE FROM RELIABLE R-DB-1.1A DUCK BILL (THREADED) Aluminum Body Smooth Jaws Cap: " # KCM ACSR ASTM: Type I / Class A / Grade 5 Salisbury 21030, Chance C Hastings R-BS-S REL-BS-6 Optional Ball Studs R-DB-1.66B DUCK BILL (THREADED) Aluminum Body Serrated Jaw Cap: " # MCM ACSR ASTM: Type I / Class B / Grade 5 Salisbury 1853 Chance C R-BS-GC BALL SOCKET CLAMP (THREADED) Bronze Body 1" Ball Diameter Current: 400 Amps /60 Hz ASTM: Type I / Class A / Grade 5 Salisbury Chance C R-GR-PS PARKING STUD Bronze Salisbury Chance G3627 Hastings /2-13UNC THREADED PART DIE R-#2TF 165 R-1/0TF 165 R-2/0TF 165 R-4/0TF 167 REL-BUS-6.62 C TYPE (THREADED) Aluminum Smooth, Flat Lower Jaw Capacity: 6.12 IPS 0.4"- 6.62" ASTM: Type I / Class A / Grade 5 Salisbury 2991 COPPER FERRULES Lock Washer & 5/8-11 UNC Nut For Substation Buses - Round, Square, Rectangle, or H Section Copper Plain Ferrule PLAIN PART DIE R-#2PF 165 R-1/0PF 165 R-2/0PF 165 R-4/0PF 167 R DOUBLE HANGER STUD Salisbury 2427 R SINGLE HANGER STUD (NOT SHOWN) Salisbury 1928 CLAMPS 359
7 20882 T C MODEL T C CONST. / THREAD / WT. Al / Acme / 2.1 lbs. Al / Acme / 2.2 lbs. Al / Acme / 1.7 lbs. Al / Acme / 1.8 lbs. JAW STYLE Serrated (U) Curved (L) Smooth (U) Curved (L) Smooth (U) Curved (L) Serrated (U) Flat (L) CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION 5H Grade 5 (Class B) 5H Grade 5 (Class A) Grade 5 (Class A) Grade 5 (Class B) MAIN LINE RANGE - MIN. #6 (0.16 in.) #6 (0.16 in.) #6 (0.16 in.) 4 Solid.18 Dia. MAIN LINE RANGE - MAX MCM ACSR (2 in.) 2" O.D. Bus 2" O.D. Bus 2" O.D. Bus CLAMPS MODEL 1895 C T CONST. / THREAD / WT. Al / Acme / 1.5 lbs. Al / Fine / 1.5 lbs. Al / Acme / 1.5 lbs. Al / Acme / 1.25 lbs. JAW STYLE Serrated (U) Flat (L) Smooth (U) Curved (L) Serrated (U) Curved (L) Serrated (U) Curved (L) CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION Grade 5 (Class B) Grade 5 (Class A) Grade 5 (Class B) Grade 5 (Class B) MAIN LINE RANGE - MIN. #6 -.16" Dia. #6 (0.16 in.) #6 (0.16 in.) #8 Sol. Cu. (0.128") MAIN LINE RANGE - MAX KCM ACSR (1.5 in.) C kcmil Cu kcmil ACSR (1.5 in.) " Dia. Cable 1033 kcmil ACSR (1.25 in.) QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION T
8 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION C C T MODEL C C T CONST. / THREAD / WT. Al / Acme / 1.25 lbs. Bronze / Fine / 2.0 lbs. Bronze / Acme / 1.7 lbs. Bronze / Fine / 1.5 lbs. JAW STYLE Serrated (U) Curved (L) Smooth (U) Curved (L) Serrated (U) Curved (L) Smooth (U) Flat (L) CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 250 RMS Amps / 60Hz FAULT CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 21kA@15 / 15kA@30 ASTM DESIGNATION Grade 5 (Class B) Grade 5 (Class A) Grade 5 (Class B) Grade 2 (Class A) MAIN LINE RANGE - MIN. #8 Sol. Cu. (0.128 in.) #6 Sol. Cu. (0.16 in.) #6 (0.16 in.) #6 (0.16 in.) MAIN LINE RANGE - MAX kcmil ACSR (1.25 in.) 1033 kcmil ACSR (1.25 in.) MCM ACSR (1.25 in.) 477 MCM ACSR (0.81 in.) C C MODEL C C CONST. / THREAD / WT. Al / Acme / 2.2 lbs. Al / Fine / 1.5 lbs. Al / Acme / 1.5 lbs. Al / Fine / 1.2 lbs. JAW STYLE Serrated Smooth Serrated Smooth CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION Grade 5 (Class B) Grade 5 (Class A) Grade 5 (Class B) Grade 5 (Class A) MAIN LINE RANGE - MIN. #6 (0.16 in.) #6 (0.16 in.) #6 (0.16 in.) #6 (0.16 in.) MAIN LINE RANGE - MAX MCM ACSR (1.66 in.) 795 MCM ACSR (1.1 in.) 950 kcmil Cu kcmil ACSR (1.506") 566 kcmil Cu. 900 kcmil ACSR (1.162") CLAMPS 361
9 C C MODEL C C CONST. / THREAD / WT. Al / Acme / 2.1 lbs. Bronze / Acme / 2.4 lbs. Bronze / Acme / 2.0 lbs. Bronze / Acme / 2.0 lbs. JAW STYLE Serrated, Flat Serrated Serrated Serrated, Flat CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION Grade 5 (Class B) Grade 5 (Class B) Grade 5 (Class B) Grade 5 (Class B) MAIN LINE RANGE - MIN..06" #6 (0.16 in.) 1/8 in. 1/8 in. MAIN LINE RANGE - MAX in. Dia., 1.5 in. Flat 1.5 in. Flat 1.5 in. Angles 1.5 in. Flat 1.5 in. Angles 1.5 in. Flat CLAMPS 362 G33632 G33633SJ MODEL G33632 G33633SJ G33634SJ CONST. / THREAD / WT. Bronze / Fine / 1.5 lbs. Al / Fine / 1.6 lbs. Al / Fine / 1.5 lbs. JAW STYLE Serrated, Flat Serrated, Flat Serrated, Flat QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION G33634SJ CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CYCLE 27kA@15 / 20kA@30 27kA@15 / 20kA@30 27kA@15 / 20kA@30 ASTM DESIGNATION Grade 3 (Class B) Grade 3 (Class B) Grade 3 (Class B) MAIN LINE RANGE - MIN. 1/8 in. 1/8 in. 1/8 in. MAIN LINE RANGE - MAX. 1.5 in. Angles 1.5 in. Flat 1.5 in. Angles 1.5 in. Flat 1.5 in. Angles 1.5 in. Flat
10 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION 2991 TP6AR2T20-S G3369 C MODEL 2991 TP6AR2T20-S G3369 C CONST. / THREAD / WT. Al / Acme / 6.9 lbs. Al / Fine Al / Acme / 5.2 lbs. Al / Acme / 6.0 lbs. JAW STYLE Smooth (U) Flat (L) Smooth (U) Flat (L) Smooth (U) Flat (L) Smooth (U) Flat (L) CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CYCLE 43kA@15 / 30kA@30 47kA@15 / X/R@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION Grade 5H (Class A) Grade 5H (Class A) Grade 5 (Class A) Grade 5 (Class A) MAIN LINE RANGE - MIN..4 in. 2.5 in. 4/0 Str. Cu. (0.500 in.) 3.5 in. O.D. MAIN LINE RANGE - MAX in. I.P.S / 6.62 in. 6.5 in. 4 in. x 4 in. Square 4.5 in. O.D. Bus 6-5/8 in. O.D. MODEL C M-037 CONST. / THREAD / WT. Al / Acme / 3.2 lbs. Al / Fine / 2.4 lbs. Al / Acme / 1.1 lbs. Al / Fine / 1.4 lbs. JAW STYLE Serrated Ball Stud & C Ball Stud & C Ball Stud & C CONTINUOUS CURRENT 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz 400 RMS Amps / 60Hz FAULT CYCLE 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 43kA@15 / 30kA@30 ASTM DESIGNATION Grade 5 (Class B) Grade 5H (Class A) Grade 5 (Class A) Grade 5 (Class A) MAIN LINE RANGE - MIN. #2 Cu. (.258 in.) #6 (.16 in. dia.) #6 (.16 in. dia.) # 8 (.16 in. dia.) MAIN LINE RANGE - MAX. C in in. Ball Stud (1.5 in. dia.) MCM (.86 dia.) 20 mm Ball Stud 795 (1.13 in.) 1 in. Ball Stud 01-M-037 CLAMPS 363
11 Rotating Ground Adapters GR253X Bronze Vise-type Connectors GR43BS2 Ball-stud Connectors ROTATING GROUND ADAPTERS FOR REELS TESTED AND MEETS ASTM F 855 STANDARD Provide system protection while conductor is pulled from reels for stringing operations By design, the system adds conductor grounding but does not replace other grounding practices System serves as intended path to ground for static discharge and accidental energizing from downed lines, equipment contact, adjacent conductors and lightning INSTALLATION Rotating Ground Adapter slides on reel mandrel and three locking bolts secure it Outer collar contact connects to the end of the conductor from inside the reel Adapter s inner collar contact connects to a permanent or screw-in ground rod (not included) MODEL ASTM GRADE FAULT RATING PIPE DIA. MAX. CONNECTOR TYPE CONNECTOR RANGE WEIGHT GR253X Grade 1 15 cycles cycles 3-3/16" Bronze Vise Type 3 Sol. to 4/0 Str. 9.8 lbs. GR43BS2 Grade 5 cycles cycles 2-11/16" Two 1"-dia. Ball Studs See Ball Stud Clamp in Chance Cat. Section lbs. ROTATING / NEUTRAL / BREAKAWAY /8" BAC Continuous current rating of 250 amps Fault rated to ASTM Grade 1 (14 KA for 15 cycles) Pin 5/8" 7603 NEUTRAL JUMPER ASSEMBLY The Concentric Neutral Jumper Assembly is used for bonding purposes on non-jacketed cable. Installed across a portion of cable to be cut, repaired, or spliced. The assembly is left in place until the concentric neutral is spliced. Neutral Jumper Assembly Features and Benefits Includes: (2) Ground clamps, 4 feet of 1/0 clear jacketed flexible copper cable. The concentric neutral ground clamp is spring pressured. Other lengths are available. 7603C Clamp only w/ wing nut Cable Dia. 3/4" to 2" BAC BREAKAWAY BONDING CONNECTOR Designed to break away at 300 lbs Electrical rating 10 cycles 5/8-11 UNC threaded ends Bonding assemblies available on request. 364 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
12 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION CABLES (ASTM F855) CABLE SIZE CONTINUOUS CURRENT / FAULT 15 CYCLES Other jacket colors available upon request. YELLOW JACKET CLEAR JACKET GREEN JACKET MODEL # OF STRANDS MODEL # OF STRANDS MODEL # OF STRANDS #2 200 A / 14kA #2YGC 665 #2CLEAR 665 #2GGC 665 1/0 250 A / 21kA 1/0YGC /0CLEAR /0GGC /0 300 A / 21kA 2/0YGC /0CLEAR /0GGC /0 400 A / 43kA 4/0YGC /0CLEAR /0GGC 2109 FERRULES TIN PLATED UNSHROUDED THREADED COPPER FERRULES MODEL CABLE SIZE DIE R-#2TFT #2 U165 R-1/0TFT 1/0 U165 R-2/0TFT 2/0 U165 R-4/0TFT 4/0 U167 UNSHROUDED THREADED COPPER FERRULES MODEL CABLE SIZE DIE R-#2TF #2 U165 R-1/0TF 1/0 U165 R-2/0TF 2/0 U165 R-4/0TF 4/0 U167 UNSHROUDED PLAIN COPPER FERRULES MODEL CABLE SIZE DIE R-#2PF #2 U165 R-1/0PF 1/0 U165 R-2/0PF 2/0 U165 R-4/0PF 4/0 U " HEAT SHRINK TUBE Clear heat shrink for all grounding cables GR-3V 16" X 18" GROUNDS WARNING FLAG Identification marker for temporary grounds. It has reflective striping for night time visibility. The marker is secured onto the ground with velcro strap. It has the word "Grounds" Stenciled onto the marker. Weight 7 oz. SHROUDED THREADED COPPER FERRULES MODEL CABLE SIZE DIE "A" DIE "B" C #2 U165 U166 C /0 U165 U168 C /0 U165 UL C /0 U166 UL Identification Marker with Reflective Striping 1632-GR-3V CABLES / FERRULES 365
13 20817 STATIC DISCHARGE STICK The Static Discharge Stick is designed to safely remove the static charge after de-energizing. This tool is pre-assembled and includes a brass alloy U hook, closed cell foam-filled tubular fiberglass switch stick made in accordance with ASTM Standard F711. Static discharge sticks have 6 feet of copper grounding cable attached to a Salisbury 1814 flat jaw, grade 3, bronze serrated clamp with strain relief. STATIC DISCHARGE STICK MODEL DESCRIPTION WEIGHT Static discharge stick 4' length 8 lbs Static discharge stick w/ universal attachment 1' length 38 lbs. TOOL HOLDER SALCOR Tool Holders secure tools to trailers, compartments and tool rooms. Great for holding rescue hooks and static discharge sticks. 12 per package Static Discharge Stick w/ Universal Attachment I.D. Tool holder Weight: 3.5 lbs. DISCHARGE STICK & BALL STUDS BALL STUD Long and Short Ball Stud, and the offset NEMA Pad Ball Studs are made from a Tin-Plated Copper Alloy. They each have a 1inch ball. THREADED SHORT AND LONG BALL STUD - The short stud is used conventionally, while the long stud may also be used with C or Duckbill clamps that have a jaw width of 2.75 inch or less. 1/2"-13 UNC x 2" TH OFFSET NEMA PAD BALL STUD - Standard bolt hole spacing. Available in long and short lengths. INTERNAL THREAD BALL STUD - Tapped for 1/2-13 UNC bolt having a length of at least 1 inch. MODEL DESCRIPTION DIM Ball Stud Short 4.38 in Ball Stud Long 6.13 in Offset NEMA Pad Short 5.13 in. x 1.5 in Offset NEMA Pad Long 7 in. x 1.5 in Internal Thread Ball Stud 4 in Cover for Ball Stud 366 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION
14 QUALITY I EXPERIENCE I PROFESSIONALISM I DEDICATION SLIP-RESISTANT (BLACK) EQUI-MAT PROTECTIVE GROUND GRID Complies with OSHA for equipotential requirements near vehicles, underground gear, overhead switches and in substations Meets ASTM F2715 Standard Way to establish an equipotential zone for a lineworker For standing on during various energized and de-energized work practices Equipotential Zone. Temporary protective grounds SHALL be placed at locations and arranged to prevent each employee from being exposed to hazardous differences in electrical potential. Portable, easy to use, maintain and store Consists of a high-ampacity tinned-copper-braid cable sewn in a grid pattern onto a vinyl/polyester fabric Cable terminals permit connecting mat s grid in series with an electrical ground and subject system component or vehicle Mat may be folded and stored in a tool bag Slip-Resistant Equi-Mat Personal Protective Ground Grid Each Unit includes Ground Grid, Long Ball Stud & Instructions. SLIP-RESISTANT MATERIAL For rain, snow and ice conditions Napped surface offers superior footing NOTE: For dry conditions, consider the Standard Orange EQUI-MAT Personal Protective Ground Grid, available in the same sizes & kits MODEL SIZE WEIGHT PSC " x 58" 8 lbs. PSC " x 120" 13 lbs. PSC " x 120" 20 lbs. GMK PRE-PACKAGED KIT Each Pre-Packaged Kit includes: 58" x 58" Grounding Grid Ground Assembly 6' x 2 AWG and (2) 3/4 in. Bronze C Clamps Storage Bag GMK A & 1590C SERIES TRAVELING GROUND Reduces the possibility of electric shock due to contact with energized conductors Heavy duty units designed for conductors measuring up to 1590MCM (1590C) and 336MCM (336A) Meets the ASTM F885 grade five rating Carrying cases are available, add "8" to part number Replacement parts are available TG TRAVELING GROUND Maintain a positive contact from conductor to ground through the use of a ground wire Reversible ground stud which accommodates almost any type of ground clamp Adjustable spring loaded center roller to maintain the correct pressure on the conductor Wire capacity of.250" to 1.625" Aluminum rollers 336A TG C GROUND GRID / TRAVELING GROUND 367
Contact Reliable Equipment for more ground clamps, accessories, and related products.
Proper selection of each part of a grounding set is important in filling the requirements of your application. 1. CLAMPS Clamp Design (C Type, Duck Bill, Flat, or Bus) Clamp Size. (Min. & Max. Capacity)
More informationGrounding Clamp. Pins and Ball-Socket Clamps for Temporary Grounding
Grounding Clamp Pins and Ball-Socket Clamps for Temporary Grounding Pins and Ball-Socket Clamps have been designed to solve several temporary grounding situations, where the physical space or the contact
More informationGround Clamps Cable Tray
COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both
More informationHANDWHEELS.
HANDWHEELS 5 Handwheels Aluminum Angular Solid Handwheel...5.2 Aluminum Angular Spoked Handwheel... 5.2 Aluminum Finger Wheel... 5.10 Cast Angular Spoked Handwheel... 5.3 Cast Iron Angular Spoked Handwheel...
More informationFERRULES & TOOLS Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)
TerminalBlocks_072012(alt-2).QD_Blocks 10/23/12 9:05 AM Page 117 To help you do the best job possible when using Altech s terminal blocks, we put together a selection of useful tools to accomplish just
More informationInsulated Scissors. Handles made with shock-proof plastic. Length Blade Std. Part No. Type mm shape Pk.
Cutting Tools Cable Cutter - For copper and aluminum cables only. Extremely high cutting capacity with adjustable screw joint. for cable Length Std. Part No Type Ømm mm 2 AWG mm Pk. AP1017 N 15 50 1/0
More informationHANDLES, LE VERS & CR ANKS
Handles, Levers & Cranks Plastic Pull/Lift Handle...112 Plastic Revolving Fold-Away Handle... 95 Plastic Revolving Heavy Duty Handle With Steel Shank... 92 Plastic Revolving Handle With Steel Through Shank...
More informationPole Line Hardware. Catalog
Catalog Table of Contents Anchor Rods... 3 Expanding Anchors... 3 Pole Bands... 4 Adjustable Pole Bands... 4 Connecting Links... 4 Malleable Guy Clips... 4 Shackles... 5 Crossarms... 5 Steel Braces...
More informationMYRIAD Banner Stand is a trademark of Skyline Exhibits. Patent Pending PN32294-B. MYRIAD Banner Stand
is a trademark of Skyline Exhibits Patent Pending 1.1 1. Banner Stand Setup 1.1 Remove banner stand from standard case or Arrive Portable Display & Workstation and assemble pole. 1.2 Insert pole into base
More informationElectrical Safety Products
Electrical Safety Products W.H. Salisbury & Co. Pioneered the manufacture of linemen s products in the early 1920 s Salisbury has four plants two in Chicago, IL area and two in Charleston, SC We employ
More informationCONNECTORS FROM THE GREAVES ADAP T ER Z O N E
AGE 9 CONNECTORS FROM THE GRVES ADA T ER Z O N E When the cable doesn t fit, you need a solution fast What can you do when dealing with new or relocated equipment, spec changes, and/or mismatched parts
More informationEmergency Stop Devices
New! Selection and Application of.. 278 Emergency Stop Rope Pull Switches........... 279 New! Emergency Stop Push Buttons............... 293 Banner Engineering Corp. Minneapolis, MN U.S.A. bannerengineering.com
More informationContents. Introduction...3 Description...3. Pack Contents...4. Rada Heavy Duty EV Shower Fittings Right Angled Connector (RAC)...
SHOWER FITTINGS PRODUCT MANUAL IMPORTANT Installer: This manual is the property of the customer and must be retained with the product for maintenance and operational purposes. Contents Introduction...3
More informationSolutions for Original Equipment Manufacturers (OEM) Connecting Power to Your World TM
Solutions for Original Equipment Manufacturers (OEM) Connecting Power to Your World TM The Right Fit At BURNDY, we pride ourselves on developing solutions. In fact, we thrive on challenge. When our customers
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2204A
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS C2204A Warnings Truck Bed and Camper Protection Torklift does not recommend installing your camper on top of a plastic bed liner (or other compressible
More information9/16" deep socket Socket wrench (ratchet) 3/16" drill bit 5/8" spade bit Electric drill or power screwdriver Safety glasses
Subject: Flatwall Headwall System (P670E) Installation Instructions Introduction This procedure provides instructions for installing the Flatwall Headwall System (P670E). Before starting this procedure,
More informationAviation Snips. Multi-Cable Cutter
CUTTING tools Aviation Snips 0653-01L Drop-forged, chrome-moly steel blades with serrated edges. Includes left, right and straight-cut versions with color coded grips green (right), yellow (straight),
More informationInduction hardened cutting knives for long life. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. Electrician's (EINS)
More informationElectrician's Insulated Tools
Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. ~ Electrician's FORGED
More informationIB 7/40 Classic. Automatic residual ice discharge. Outstanding mobility. Efficient airflow in the device. Clear display
IB 7/40 Classic Thanks to airflow optimisations, our Ice Blaster IB 7/40 impresses with excellent results during dry ice cleaning, even when working with low air pressures. Compact device. 1 Automatic
More informationPARTS LIST CHARGER 2022 ABLT
PARTS LIST CHARGER 2022 ABLT HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 5990731 SPRING CLIP PAD HOLDER SET INCLUDES: 1 101A 9120205 #8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW PACK OF 3 3 102 9121490
More informationInsulated Tools. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Insulated Tools r o f e s s i o Klein insulated tools maintain the highest level of quality Klein is known for, and they offer added protection against shock from energized sources with voltage
More information4-foot Economy Sign Post. 4-foot post is rated at 2 pounds per foot. 7-foot Economy Sign Post
Introduction: ComplianceSigns.com offers a variety of sign posts, sign mounting hardware, sign bases, mounting tape and more to mount your safety signs indoors or out. We offer three styles of sign posts,
More informationTherme storage water heater. Table of contents. Symbols used. Symbols used Symbol indicates a possible hazard. Installation instructions
Therme storage water heater Table of contents Symbols used... 8 Installation instructions Water supply... 9 Choice of location... 9 Installation of the Therme... 9 Fitting the draining and venting valve...
More informationHINGES & STAYS. Hinges & Stays Large Take-Apart Hinge. Medium Take-Apart Hinge
Hinges & Stays HINGES & STAYS TAKE-APART-CONTINUOUS-WELD-ON-CONCEALED-STRAP-STOP-BUTT-OFFSET-LIFT-OFF-STAY 0.1 0-180800.0 Mat: Steel Finish: Zinc Plate Wt:.0kg /.1lbs.8. Acts as a hinge but allows quick
More informationTOOLING COMPONENTS. tel fax Clamping Kits Step Blocks...7. Driver Studs...
Clamping Kits... 2-8 Step Blocks...7 Driver Studs... 9-13 Bolts, Screws... 14-20 Nuts, Washers... 21-29 Sex Bolts... 30-31 Clamps... 32-44 Screws... 45-49 Knobs & Levers... 49-53 Rest Pads...54 Index Plungers...
More informationINSTRUCTION MANUAL ALEKO RETRACTABLE AWNING
INSTRUCTION MANUAL for ALEKO RETRACTABLE AWNING www.alekoproducts.com FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY! 1 Important Safety Precautions WARNING NOTE: FOR PERSONAL SAFETY,
More informationABS Model Background Stand
ABS Model Background Stand Product Overview: The completely redesigned Ravelli ABS model background stand is 10' tall by 12.3' wide. It is comprised of two tripod stands and four 3 cross bar sections and
More informationCONTENTS. Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5. Hoist Rings Center Pull 6 Side Pull 7. Socket Head Stripper Bolts Inch 8 Metric 9
CONTENTS PAGE NUMBER Gold Bond Fasteners Bolts 1 Clamps 3 Nuts 4 Washers 5 Hoist Rings Center Pull 6 Side Pull 7 Socket Head Stripper Bolts Inch 8 Metric 9 Punch Holder Shanks 10 Roller Stock Guides 11
More informationTerminals & Connectors
Your Connection Since 1970 Terminals & Connectors 2 TABLE OF CONTENTS Adapters........................... 13 Brazed Barrel Lugs................... 16-17 Bullet Connectors....................9-10 Butt Connectors.......................3
More informationA A A T E C H N O L O G Y
A A A T E C H N O L O G Y & SPECIALTIES CO., INC. H A R D W A R E C A T A L O G TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2011 www.aaatech.com 4 0 Y E A R S S E R V I N G I N D U S T
More informationHome Improvement Fittings Wardrobe Fittings
Wardrobe rail Wardrobe rail, welded Finish: Chrome plated Material thickness: 0.8 1.5 mm Height: 30 mm Material thickness 0.8 mm 801.03.220 1.0 mm 801.13.220 1.2 mm 801.10.229 1.5 mm 801.09.22 Packing:
More informationMACHETES & MACHETE SHEATHS HUDSON BAY AXE SINGLE EDGE AXE GUARD DOUBLE EDGE AXE GUARD LADDER PLATFORM. Machete CAT. NO.
Phone: 800-227-4255 www.hallssafety.com Fax: 724-458-0592 MACHETES & MACHETE SHEATHS Machete 2PMA18-18 Blade 2PMA22-22 Blade High quality machete. High carbon tempered steel blade. Black poly handle with
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationBEV-TENT COMPONENTS. Made in South Africa
BEV-TENT COMPONENTS REB MARKETING Distributing Agent Tel: (011) 452 9131 Cell: 072 965 6792 Fax: (011) 609 4615 15 Imvubu Road, Sebenza Ext 6, Edenvale orders@rebmarketing.co.za BEV-TENT 001 90 deg Elbow
More informationSalisbury by Honeywell
Class 3 Conductor Covers 5 cover is ideal for covering long spans when weight is a consideration 26.4kV voltage rating 2 inside diameter May be connected with Salisbury 1.5 I.D. Class 3 or 4 flexible cover-up
More informationMASTER LOCK MASTER LOCK
PADLOCKS & ACCESSORIES Laminated 1-3/4" wide laminated steel body for superior strength hardened steel shackle for extra cut resistance 4-pin cylinder helps prevent picking dual locking levers provide
More information14' x 32' x 12' Round Top Round Style Shelter Assembly Instructions
14' x 32' x 12' Round Top Round Style Shelter Assembly Instructions Description Model # 14' x 32' x 12' RoundTop Garage - Gray 62669 Recommended Tools Please read instructions COMPLETELY before assembly.
More informationCABLE CUTTING, STRIPPING AND CRIMPING TOOLS
Cutting 38-39 Stripping 39 0 - CBE CUTTING, STRIPPING ND CRIMPING TOOS Ergonomic handles Surface protection High precision Flexibility With ergonomic handles and a specially The pliers are made of excellent
More informationGates Hose Cutter Model 6-32 For six-wire spiral and two-wire braid hose through 2" I.D. Product Number: Clean Easy Cuts Safe Operation
Standard Hydraulic Hose Specialized Mining Couplings, Adapters and Accessories Specialized Mining Hose Product Information Gates Power Cutter 208 Product : 7480-6609 Effortless Straight Cuts Every Time
More informationPremium - Retractable Stand
Our Newest System! Elite - Retractable Stand The Elite is our top of the line banner stand. Upgraded benefits include a telescoping adjustable pole. Storage inside the base for the pole and top bar. A
More information700 GUYS AND ANCHORS 3/14/2011
700 GUYS AND ANCHS //0 C G C GO Guy and Anchor Selection Guy and Anchor Chart C GA,GA, Single Helix Screw Anchors GA C G,G Expanding and Crossplate Anchors C GA, GB Multi-Helix Screw Anchors C G Sidewalk
More informationDC 700 Series Hose Reel - September 2010
Instructions Parts List Service Manual DC 700 Series Hose Reel - September 2010 Suitable for dispensing, transfer and evacuation of lubricants, fuels, air & other automotive & industrial products. To be
More informationSmallest Connector with Removable Contacts
1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative
More informationIB 15/120. Nozzle case holder. Automatic residual ice discharge. Glass-fibre reinforced plastic dry ice container. Outstanding mobility
IB 15/120 The Ice Blaster IB 15/120 is one of the most powerful dry ice blasting machines on the market. It impresses with its robustness, highly reliable technology and the best results in dry ice cleaning.
More informationKnives, Cutters & Scrapers
Knives, Cutters & Scrapers - 261 - Utility Knives T23216 T232 T23218 Snap-Off Knives SK4 Steel blades Stores up to 3 replacement blades Blade sections snap off providing sharp cutting point Stainless steel
More informationACCESSORIES ALSO AVAILABLE
ACCESSORIES ACCESSORIES ALSO AVAILABLE Salisbury offers an entire line of Arc Flash Protective Clothing and Equipment ranging from 8 cal/cm 2 to 100 cal/cm 2. Ask your local Salisbury representative for
More informationOtter XT 650 Cabin Installation and Set-Up Instructions
Otter XT 650 Cabin Installation and Set-Up Instructions Otter XT 650 Cabin Fits Medium Otter Wild Sled Only Parts Identification and Check List MODEL NUMBERS: Complete Pkg Otter XT 650 Cabin 200891 2 1
More informationINSTRUCTION SHEET TWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM PN S: , ,
INSTRUCTION SHEET TWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM PN S: 22-797010, 22-797020, 22-796161 COMPONENTS: 1. TVS-100, PN 22-797010: 47 60 (119 cm 152 cm) stroke TwistLock Vehicle Stabilizer. Component
More information29PC RATCHET SCREWDRIVER SET
83-504 29PC RATCHET SCREWDRIVER SET OLYMPIA TOOLS INTERNATIONAL INC. Including: 15pc 1/4" Screwdriver Bits: 1/8", 5/32", 3/16", 1/4" x 2, 9/32" PH1, PH2, PH3, PZ1, PZ2, T10, T15, T20, T25 1pc Adaptor 1pc
More informationZinc Cable & Conduit Connectors For Armored Cable, Flexible Metal Conduit & Metal Clad Cable
Zinc Cable & Conduit Connectors For Armored Cable, Flexible Metal Conduit & Metal Clad Cable Type FC Set Screw To terminate regular wall steel or aluminum flexible conduit to a 1/2 knockout in a dry location
More informationINSTANT GARAGE MODEL NO: CIG81224 ASSEMBLY INSTRUCTIONS PART NO: ORIGINAL INSTRUCTIONS
INSTANT GARAGE MODEL NO: CIG81224 PART NO: 3503578 ASSEMBLY INSTRUCTIONS ORIGINAL INSTRUCTIONS GC1117 INTRODUCTION Thank you for purchasing this CLARKE Instant Garage. When erected, the CIG81224 garage
More informationFarm Hardware. Farm Hardware. To order call: Fax:
1 Weather aps lear zinc plated steel. Single bolt installation, silencer block, heat resistant rivets and bushings. Weather aps Muffler lamps Stroke ontrol FITS PIPE DIMETER 11200 1-1/2 1-11/16 11201 1-3/4
More informationKearney Tools and Maintenance Equipment
Tools and Connectors Catalog Data CA325005EN Supersedes November 2015 COOPER POWER SERIES Kearney Tools and Maintenance Equipment Contents INSULATED HEAD HAND-HELD CLAMPSTICKS....2 CAM EL CLAMPSTICK....2
More informationCabinet Mount Assist Lift n Lock Instructions
Cabinet Mount Assist Lift n Lock Instructions PART LIST 2 @ Gas Cylinder 1 @ Lock Bar 2 @ Rubber Sleeve (preset) 4 @ Stopper Pin (2pcs preset) 4 @ Saddle Block 8 @ 19mm Black PVC Cap 5 @ 14mm Black PVC
More informationOtter Pro XT 1200 Cottage Installation and Set-Up Instructions
Otter Pro XT 1200 Cottage Installation and Set-Up Instructions Otter Pro XT 1200 Cottage Fits Small Ultra-Wide Otter Pro and Otter II Sled Only Parts Identification and Check List MODEL NUMBERS: Complete
More informationAdvantage Plus TIM-3600 Series Reel
Read the following precautions and instructions before you begin assembly or using. Failure to comply with these instructions could result in personal injury or property damage. Keep these instructions
More informationLevels & Measuring Tools
Levels & Measuring Tools Quick, easy and accurate measurements can mean the difference between a job well done and one that misses the mark. Klein offers a variety of levels and other measuring devices
More informationCUSTOM CYLINDERS INTERNATIONAL, INC. SOCKET JENIE PRODUCTS
CUSTOM CYLINDERS INTERNATIONAL, INC. SOCKET JENIE PRODUCTS The SOCKET JENIE product line was developed for use with a 110V or battery operated drill motor to reduce the amount of time required to set up
More informationPINS & BUSHINGS INCH
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH Steel, Bronze & Self-Lubricating Friction & Ball Bearing Components www.danly.com PINS & BUSHINGS INCH Strategically located to serve
More information10' x 20' MAX AP CANOPY EXTENSION KIT Assembly Instructions
10' x 20' MAX AP CANOPY EXTENSION KIT Assembly Instructions Frame Not Included Description Model # 10' x 20' MAX AP Canopy - Extension Kit - White 35730 Recommended Tools Please read instructions COMPLETELY
More informationInstallation Guide Cable
Installation Guide Cable Thank you for selecting a DuctSox System. This guide will be helpful for the installation of a Cable System. Sections of fabric will be labeled, assembled, bagged, and boxed for
More informationSection B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
More informationCanvas Buckets & Lineman Accessories
& Lineman Accessories Klein canvas buckets and accessories have been recognized for decades for their durability and dependability. They are built for strength to handle professional wear and tear. 247
More informationCREEK COMPANY PONTOONS
CREEK COMPANY PONTOONS ODC Sport XR 1 The ODC Sport XR 1 is an update on our best-selling 8 foot pontoon boat. FRAME Full take down, no-tools-required, heavy-duty black powder coated steel frame with Plastic
More informationASSEMBLY & CARE INSTRUCTIONS
ASSEMBLY & CARE INSTRUCTIONS 7 x TRAILER TENT SERIES 3 9 Part No. FT3711 - on road FT3923 - off road OPTIONAL SUNROOM Wall and floor kit Part No. FT3723 - on road FT39 - off road OPTIONAL SPARE ROOM Roof,
More informationStep by Step Set Up Guide
lite Step by Step Set Up Guide 1 lifting lug Secure lifting lugs to a certified lifting sling. Stand and stabilize escape system under work platform. Position module with round lunette ring facing work
More informationHose Reel Series L701/G701
Hose Reel Series L70/G70.0 WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal
More informationDO NOT use Alien Flier Zip Line Products until you have read and fully understand the SAFETY WARNINGS below!
SAFETY WARNING DO NOT use Alien Flier Zip Line Products until you have read and fully understand the SAFETY WARNINGS below! Assumption of Risk Zip line construction and use can be dangerous. Ensure you
More informationBlue Series Hot Melt Hose with RediFlext II Hanger System
Instruction Sheet P/N 1124594_01 Blue Series Hot Melt Hose with RediFlext II Hanger System Safety WARNING! Allow only personnel with appropriate training and experience to operate or service the equipment.
More informationTuf-Lite and Tuf-Lite II Fans 6000M Series Hub
Tuf-Lite and Tuf-Lite II Fans 6000M Series Hub INSTALLATION MANUAL Adjustable Pitch Fan Assembly 32.8 or 10 Meter Diameter Hudson Tuf-Lite and Tuf-Lite II fan blades Hudson Tuf-Lite (black) fan blades
More informationHANDLE AND WHEEL KIT INSTALLATION
HANDLE AND WHEEL KIT INSTALLATION Select EB and EM Series Generators Honda Power Equipment Your generator is equipped with a wheel kit and folding handle kit for easy transport and convenient storage.
More informationTRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH www.danly.com PINS & BUSHINGS INCH Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer of die sets and
More informationTHE HOME OF LINEMAN INNOVATION
THE HOME OF LINEMAN INNOVATION Decrease outages, minimize open neutrals and bad connections, & create significant savings by brushing conductors properly! MORE DURABILITY Blunt edges and tip THE MOST INNOVATIVE
More informationIMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS. Part # A7006
IMPORTANT OWNER-OPERATOR INSTALLATION INSTRUCTIONS Part # A7006 Parts List Wobble Stopper Body Wobble Stopper Shaft Camper Bracket Lower Bracket Assembly Upper Bracket Upper Bracket Clamp 3/8 SAE Flat
More informationTool Holders. Tool Pouches, Carriers, Belts & Suspenders. 4 and 5 Pocket Pouches Lineman's Pouches. Pliers and Folding Rule Holders
4 and 5 Pocket Pouches Lineman's Pouches Black leather construction with double leather back for durability. Rivet hole for belt connection. Includes knife snap, pockets for pliers, most screwdrivers,
More informationUrea/Adblue Hose Reel
www.scintex.com.au sales@scintex.com.au Model: SHR3408 Urea/Adblue Hose Reel Product Manual Specifications Spring driven drum: for automatic rewind. Locking ratchet: to maintain the desired length of hose
More informationLucky Line. C-Clip rings, plastic key clips & KEY BAK. Plastic Key Clips. Key Bak. Super 48 Key Bak
C-Clip Rings ucky ine C-Clip rings, plastic key clips & KEY BAK Spring-loaded gate makes it easy to open and close with one hand Clips to belt or purse Made of anodized aluminum 460 has a 7/8 nickel-plated
More informationAssembly TOOLS REQUIRED: 17mm and 14mm or equivalent wrenches.
Instructions for 3 Trimmer Rack, 3TR* *Patents Pending Assembly TOOLS REQUIRED: 17mm and mm or equivalent wrenches. 15 26 26 16 15 16 Attach the lower mounting brackets to the Trimmer Rack poles as shown
More informationSELF RE-ERECTING MARKER POSTS
ONE OF A KIND TECHNOLOGY FOR OUR TIMES MULTI APPLICATIONS SELF RE-ERECTING MARKER POSTS TEMPORARY OR PERMANENT BICYCLE LANES CROSSWALKS CHANALIZATION BRIDGES CITY US REFLECTOR WORK ZONES ALL-ROUND RUGGEDNESS
More informationFlying Banners. Shape & Size. Material & Pole Sleeve. Mounting Accessories PROJECTING SIGNS & FLAGS
Flying Banners View our comprehensive range of poles, flags and accessories. Over the next few pages you will find the full range of options - with detailed descriptions on banner shapes and size specifications
More informationColor Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual
Color Light Streams Lighted Bubbler Spillway Pot (CLSDLP) Installation Manual 27.75 23.75 25.50 20.75 Specifications: 8-13 GPM 12-14 VAC only (Class 2 transformer required) 3W max. 100 ft. cord, conduit
More informationSECTION SPECIFICATIONS PART 1 GENERAL
PART 1 GENERAL 1.1 SECTION INCLUDES A. Shower doors. B. Sliding enclosures. C. Shower doors and panels. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry; blocking. B. Section 15400 - Plumbing Fixtures
More informationTWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM INSTRUCTIONS
TWISTLOCK VEHICLE STABILIZER (TVS) SYSTEM 22-797010, 22-797020, 22-796161 INSTRUCTIONS COMPONENTS: 1. TVS-100, PN 22-797010: 47 60 (119 cm 152 cm) stroke TwistLock Vehicle Stabilizer. Component weight,
More informationTITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V
TITAN pt. no.: 02 0000 0128 Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS G e n e r a t i o n V Extended
More informationAlien Flier Zip Line Products Installation/Owner s Manual
Alien Flier Zip Line Products Installation/Owner s Manual 1 Table of Contents SAFETY PLEASE READ CAREFULLY... 4 Explorer Zip Line EZ Up Cable Kit Installation... 5 Xtreme Zip Line EZ Up Cable Kit Installation...
More informationAmphenol RF Interconnects TNC 31 Series Threaded Lock RF Connector System Materials
TNC 31 Series Threaded Lock RF Connector System Materials Body/Finish Contacts Centre MALE Centre FEMALE Insulator Gasket Crimp Ferrules* *Metal finishes Durability Brass/Nickel Brass/Gold Plated (Au)
More information5/16 x 20 3, /8 x 20 5, /2 x 20 9, /8 x 20 13, PART NUMBER
Binder Chains & Load Binders Binder Chains High Test - Grade 4 SIZE APPROX. WEIGHT CROSBY CAMPBELL /6 x 20,900 2899 02266 2 /8 x 20,400 29004 022292 4 /2 x 20 9,200 29022 -- 60 /8 x 20,000 290 -- 90 Transport
More informationAlien Flier Zip Line Products Installation/Owner s Manual
Alien Flier Zip Line Products Installation/Owner s Manual 1 Table of Contents SAFETY PLEASE READ CAREFULLY... 4 Constructing your Zip Line Xtreme Models... 6 Installing your Alien Flier Trolley on an Existing
More informationInsulated Hand Tools. Catalog 2100 May Insulated Hand Tools Section 2100
Section 2100 Insulated Hand Tools Catalog 2100 Insulated Hand Tools 2100 Page 2101 Grip-All Clampsticks External Control Rod External Operating Rod Type Tested per OSHA & ASTM F711 Versatile tool puts
More informationSection B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
More informationBEV-TENT COMPONENTS AGENTS. GAUTENG REB MARKETING-Nick Tel:- (011) Fax:- (011)
BEV-TENT COMPONENTS FACTORY KNYSNA Tel:- (044) 3823215 / 3824707 / 3823152 Fax:- (044) 3825709 Cel:- 0825543947 info@bgboats.co.za accounts@bgboats.co.za orders@bgboats.co.za - Ordering www.bev-tent.co.za
More informationHose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
More informationSolar Power Shade INSTRUCTION MANUAL
INSTRUCTION MANUAL 20 June 2006, Revision Initial Release 26 September 2006, version 2 Powerfilm, Inc. 2337 230th Street Ames, IA 50014 (515) 292-7606 Web Site: www.powerfilmsolar.com Table of Contents
More informationFLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE
ZIP DEE Inc. 96 Crossen Ave. Elk Grove Village, IL 60007(847)437-0980 (800)338-2378 HEAD CASTING AWNING RAIL FLEX KEY ASSEMBLY..._ o GM1 Installation Instruction GMC Motorhome RAFTER ARM TUBE MAIN ARM
More informationOtter XT Cabin Installation and Set-Up Instructions
Otter XT Cabin Installation and Set-Up Instructions Otter XT Cabin Fits Medium Otter Wild Sled Only Parts Identification and Check List MODEL NUMBERS: Complete Pkg Otter XT Cabin 200962 2 1 PARTS LIST
More informationNS 200 Series Hose Reel January 2011
Instructions Parts List Service Manual NS 200 Series Hose Reel January 2011 Suitable for dispensing, transfer and evacuation of lubricants, fuels, air & other automotive & industrial products. To be used
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. One-piece connector body: Fastest assembly Field installable Anaerobic epoxy
More informationParts Catalog. S-Series Slicer Manual S13. Model:
, 08 99506 ECN 035 Parts Catalog S-Series Slicer Manual Model: S3 S3 /3/08 Rev. M IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE FOOD
More informationπ H-3505 GARAGE CANOPY PARTS SAFETY uline.com TOOLS NEEDED 10' X 20' X 8'
π H-3505 GARAGE CANOPY 10' X 20' X 8' 1-800-295-5510 uline.com TOOLS NEEDED Safety Glasses Wrench or Socket 9/16" or 14mm Tape Measure Phillips Screwdriver Rubber Mallet PARTS Cables x 5 2-way Corner Foot
More information