FERRULES & TOOLS Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FAX (908)
|
|
|
- Owen Haynes
- 5 years ago
- Views:
Transcription
1 TerminalBlocks_072012(alt-2).QD_Blocks 10/23/12 9:05 AM Page 117 To help you do the best job possible when using Altech s terminal blocks, we put together a selection of useful tools to accomplish just that. We offer this as a service to our customers, since some of the special tools we offer are hard to find. Included in this tool selection are wire strippers to safely and quickly remove insulation from wire and cable and to speed the wire preparation process; semi-automatic and hand operated crimping tools for crimping ferrules onto wire ends. Our large selection of screwdrivers include insulated and uninsulated straight blade, flat tip and Phillips types. All tools are made from the highest quality steels for superior performance and long life. The hand tools are manufactured to exacting specifications and carefully heat treated for maximum strength and durability. FERRULES & TOOLS Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FA (908)
2 Insulated Industry Standard Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Insulated ferrules prevent conductor breakage due to bending, wire stress or vibration while facilitating wire insertion into the terminal clamp. Altech s standard insulated ferrules are color coded by conductor size for convenient identification. To ensure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. (Please refer to the ordering pages and the Crimper Selector Guide on page 98.) Sleeve: polypropylene Tube: tin-plated copper CRIMPER SELECTOR GUIDE See page INDUSTRY STANDARD FERRULES Tested According To: CSA Std C22.2 No Wire Connectors CSA Std C22.2 No. 188-M Splicing Wire and Cable Connectors ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors ANSI/UL Std No. 486C - Splicing Wire Connectors AWG Cat. Stripping Length Ferrule Dimensions mm (in.) Std. (mm2) Color Type No. mm (in.) A B C D Pk.* 24 (.25) Lt. Blue H0.25/ (.24) 10.0 (.39) 6.0 (.24) 1.2 (.05) 2.3 (.09) 500/ (.25) Lt. Blue H0.25/ (.31) 12.0 (.47) 8.0 (.31) 1.2 (.05) 2.3 (.09) 500/ (.34) Turquoise H0.34/ (.24) 10.0 (.39) 6.0 (.24) 1.2 (.05) 2.5 (.10) 500/ (.34) Turquoise H0.34/ (.31) 12.0 (.47) 8.0 (.31) 1.2 (.05) 2.5 (.10) 500/ (.50) Orange H0.50/ (.24) 12.0 (.47) 6.0 (.24) 1.3 (.05) 2.8 (.11) 500/ (.50) Orange H0.50/ (.31) 14.0 (.55) 8.0 (.31) 1.3 (.05) 2.8 (.11) 500/ (.75) White H0.75/ (.24) 12.0 (.47) 6.0 (.24) 1.5 (.06) 3.3 (.13) 500/ (.75) White H0.75/ (.31) 14.0 (.55) 8.0 (.31) 1.5 (.06) 3.3 (.13) 500/ (1.00) Yellow H1.00/ (.24) 12.0 (.47) 6.0 (.24) 1.7 (.07) 3.5 (.14) 500/ (1.00) Yellow H1.00/ (.31) 14.0 (.55) 8.0 (.31) 1.7 (.07) 3.5 (.14) 500/ (1.50) Red H1.50/ (.31) 14.0 (.55) 8.0 (.31) 2.0 (.08) 4.0 (.16) 500/ (1.50) Red H1.50/ (.39) 16.0 (.63) 10.0 (.39) 2.0 (.08) 4.0 (.16) 500/ (1.50) Red H1.50/ (.71) 24.0 (.94) 18.0 (.71) 2.0 (.08) 4.0 (.16) 500/ (2.50) Blue H2.50/ (.31) 14.0 (.55) 8.0 (.31) 2.5 (.10) 4.7 (.19) 500/ (2.50) Blue H2.50/ (.47) 18.0 (.71) 12.0 (.47) 2.5 (.10) 4.7 (.19) 500/ (2.50) Blue H2.50/ (.71) 24.0 (.94) 18.0 (.71) 2.5 (.10) 4.7 (.19) 500/ (4.00) Gray H4.00/ (.39) 17.0 (.67) 10.0 (.39) 3.2 (.13) 5.4 (.21) 500/ (4.00) Gray H4.00/ (.47) 20.0 (.79) 12.0 (.47) 3.2 (.13) 5.4 (.21) 500/ (4.00) Gray H4.00/ (.71) 26.0 (1.02) 18.0 (.71) 3.2 (.13) 5.4 (.21) (6.00) Black H6.00/ (.47) 20.0 (.79) 12.0 (.47) 3.9 (.15) 6.9 (.27) (6.00) Black H6.00/ (.71) 26.0 (1.02) 18.0 (.71) 3.9 (.15) 6.9 (.27) (10.00) Ivory H10.0/ (.47) 22.0 (.87) 12.0 (.47) 4.9 (.19) 8.4 (.33) (10.00) Ivory H10.0/ (.71) 28.0 (1.10) 18.0 (.71) 4.9 (.19) 8.4 (.33) (16.00) Green H16.0/ (.47) 24.0 (.94) 12.0 (.47) 6.2 (.24) 9.6 (.38) (16.00) Green H16.0/ (.71) 28.0 (1.10) 18.0 (.71) 6.2 (.24) 9.6 (.38) (25.00) Brown H25.0/ (.71) 30.0 (1.18) 18.0 (.71) 7.7 (.30) 12.0(.47) 50 4 (25.00) Brown H25.0/ (.87) 36.0 (1.42) 22.0 (.87) 7.7 (.30) 12.0(.47) 50 2 (35.00) Beige H35.0/ (.71) 30.0 (1.18) 18.0 (.71) 8.7 (.34) 13.5(.53) 50 2 (35.00) Beige H35.0/ (.98) 39.0 (1.54) 25.0 (.98) 8.7 (.34) 13.5(.53) 50 1 (50.00) Olive H50.0/ (.79) 36.0 (1.42) 20.0 (.79) 10.9(.43) 16.0(.63) 50 2/0 (70.00) Yellow H70.0/ (.79) 37.0 (1.46) 20.0 (.79) 13.4(.53) 17.0(.67) 25 3/0 (95.00) Red H95.0/ (.98) 44.0 (1.73) 25.0 (.98) 15.4(.61) 19.0(.75) 25 4/0 (120.00) Blue H120.0/ (1.06) 48.0 (1.89) 27.0 (1.06) 17.6(.69) 22.4(.88) MCM(150.0)Yellow H150.0/ (1.26) 58.0 (2.28) 32.0 (1.26) 20.5(.81) 25.0(.98) 25 * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 100 standard pack: Type H0.25/6, Cat. No / Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FA (908)
3 Insulated DIN Standard DIN STANDARD FERRULES Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Insulated ferrules prevent conductor breakage due to bending, wire stress or vibration while facilitating wire insertion into the terminal clamp. Altech s DIN standard ferrules are in compliance with DIN requirements, making them ideal for export applications. They also have a specified color code convention that differs from the color code used for Altech s industry standard ferrules. To ensure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. (Please refer to the ordering pages and the Crimper Selector Guide on page 98.) Sleeve: polypropylene Tube: tin plated copper CRIMPER SELECTOR GUIDE See page Tested According To: CSA Std C22.2 No Wire Connectors CSA Std C22.2 No. 188-M Splicing Wire and Cable Connectors ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors ANSI/UL Std No. 486C - Splicing Wire Connectors AWG Cat. Stripping Length Ferrule Dimensions mm (in.) Std. (mm2) Color Type No. mm (in.) A B C D Pk.* 20 (.50) White H0.50/ (.24) 12.0 (.47) 6.0 (.24) 1.3 (.05) 2.8 (.11) 500/ (.50) White H0.50/ (.31) 14.0 (.55) 8.0 (.31) 1.3 (.05) 2.8 (.11) 500/ (.50) White H0.50/ (.39) 16.0 (.63) 10.0 (.39) 1.3 (.05) 2.8 (.11) 500/ (.75) Gray H0.75/ (.24) 12.0 (.47) 6.0 (.24) 1.5 (.06) 3.3 (.13) 500/ (.75) Gray H0.75/ (.31) 14.0 (.55) 8.0 (.31) 1.5 (.06) 3.3 (.13) 500/ (.75) Gray H0.75/ (.39) 16.0 (.63) 10.0 (.39) 1.5 (.06) 3.3 (.13) 500/ (.75) Gray H0.75/ (.47) 18.0 (.71) 12.0 (.47) 1.5 (.06) 3.3 (.13) 500/ (1.00) Red H1.00/ (.24) 12.0 (.47) 6.0 (.24) 1.7 (.07) 3.5 (.14) 500/ (1.00) Red H1.00/ (.31) 14.0 (.55) 8.0 (.31) 1.7 (.07) 3.5 (.14) 500/ (1.00) Red H1.00/ (.39) 16.0 (.63) 10.0 (.39) 1.7 (.07) 3.5 (.14) 500/ (1.00) Red H1.00/ (.47) 18.0 (.71) 12.0 (.47) 1.7 (.07) 3.5 (.14) 500/ (1.50) Black H1.50/ (.31) 14.0 (.55) 8.0 (.31) 2.0 (.08) 4.0 (.16) 500/ (1.50) Black H1.50/ (.39) 16.0 (.63) 10.0 (.39) 2.0 (.08) 4.0 (.16) 500/ (1.50) Black H1.50/ (.47) 18.0 (.71) 12.0 (.47) 2.0 (.08) 4.0 (.16) 500/ (1.50) Black H1.50/ (.71) 24.0 (.94) 18.0 (.71) 2.0 (.08) 4.0 (.16) 500/ (2.50) Blue H2.50/ (.31) 14.0 (.55) 8.0 (.31) 2.5 (.10) 4.7 (.19) 500/ (2.50) Blue H2.50/ (.47) 18.0 (.71) 12.0 (.47) 2.5 (.10) 4.7 (.19) 500/ (2.50) Blue H2.50/ (.71) 24.0 (.94) 18.0 (.71) 2.5 (.10) 4.7 (.19) 500/ (4.00) Gray H4.00/ (.39) 17.0 (.71) 10.0 (.39) 3.2 (.13) 5.4 (.21) 500/ (4.00) Gray H4.00/ (.47) 20.0 (.79) 12.0 (.47) 3.2 (.13) 5.4 (.21) 500/ (4.00) Gray H4.00/ (.71) 26.0 (1.02) 18.0 (.71) 3.2 (.13) 5.4 (.21) (6.00) Yellow H6.00/ (.47) 20.0 (.79) 12.0 (.47) 3.9 (.16) 6.9 (.27) (6.00) Yellow H6.00/ (.71) 26.0 (1.02) 18.0 (.71) 3.9 (.16) 6.9 (.27) (10.00) Red H10.00/ (.47) 22.0 (.87) 12.0 (.47) 4.9 (.20) 8.4 (.33) (10.00) Red H10.00/ (.71) 28.0 (1.10) 18.0 (.71) 4.9 (.20) 8.4 (.33) (16.00) Blue H16.00/ (.47) 24.0 (.87) 12.0 (.47) 6.2 (.24) 9.6 (.38) (16.00) Blue H16.00/ (.71) 28.0 (1.10) 18.0 (.71) 6.2 (.24) 9.6 (.38) (25.00) Yellow H25.00/ (.71) 30.0 (1.18) 18.0 (.71) 7.7 (.30) 12.0(.47) 50 4 (25.00) Yellow H25.00/ (.87) 36.0 (1.5) 22.0 (.87) 7.7 (.30) 12.0(.47) 50 2 (35.00) Red H35.00/ (.71) 30.0 (1.18) 18.0 (.71) 8.7 (.34) 13.5(.53) 50 2(35.00) Red H35.00/ (.98) 39.0 (1.54) 25.0 (.98) 8.7 (.34) 13.5(.53) 50 1 (50.00) Blue H50.00/ (.79) 36.0 (1.5) 20.0 (.79) 10.9(.43) 16.0(.63) 50 * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 100 standard pack: Type H0.50/6, Cat. No /100 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FA (908)
4 Uninsulated Ferrules insure reliable electrical connections when terminating stranded flexible wire in terminal blocks, circuit breakers or other control devices. Uninsulated ferrules prevent wire strands from fraying and breaking and are extremely cost effective. Their shorter lengths and uninsulated bodies offer advantages when making terminations in printed circuit board terminal blocks and in other terminal blocks with smaller clamps or narrow widths. To ensure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. (Please refer to the ordering pages and the Crimper Selector Guide on page 109.) Tube: tin plated copper UNINSULATED FERRULES Tested According To: CSA Std C22.2 No Wire Connectors CSA Std C22.2 No. 188-M Splicing Wire and Cable Connectors ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors ANSI/UL Std No. 486C - Splicing Wire Connectors AWG Cat. Stripping Length Ferrule Dimensions mm (in.) Std. (mm2) Type No. mm (in.) A B (ID) C Pk.* 20 (.50) H0.50/ (.24) 6.0 (.24) 1.3 (.05) 2.1 (.08) 1000/ (.75) H0.75/ (.24) 6.0 (.24) 1.5 (.06) 2.3 (.09) 1000/ (.75) H0.75/ (.39) 10.0 (.39) 1.5 (.06) 2.3 (.09) 1000/ (1.00) H1.00/ (.24) 6.0 (.24) 1.7 (.07) 2.5 (.10) 1000/ (1.00) H1.00/ (.39) 10.0 (.39) 1.7 (.07) 2.5 (.10) 1000/ (1.50) H1.50/ (.28) 7.0 (.28) 2.3 (.09) 2.8 (.11) 1000/ (1.50) H1.50/ (.39) 10.0 (.39) 2.3 (.09) 2.8 (.11) 1000/ (2.50) H2.50/ (.28) 7.0 (.28) 2.5 (.10) 3.4 (.13) 1000/ (2.50) H2.50/ (.47) 12.0 (.47) 2.5 (.10) 3.4 (.13) 1000/ (4.00) H4.00/ (.35) 9.0 (.35) 3.2 (.13) 4.0 (.16) 1000/ (4.00) H4.00/ (.47) 12.0 (.47) 3.2 (.13) 4.0 (.16) 1000/ (6.00) H6.00/ (.47) 12.0 (.47) 3.9 (.15) 4.7 (.19) 500/ (6.00) H6.00/ (.59) 15.0 (.59) 3.9 (.15) 4.7 (.19) 500/100 8 (10.00) H10.00/ (.47) 12.0 (.47) 4.9 (.19) 5.8 (.23) 500/100 8 (10.00) H10.00/ (.59) 15.0 (.59) 4.9 (.19) 5.8 (.23) 500/100 8 (10.00) H10.00/ (.71) 18.0 (.71) 4.9 (.19) 5.8 (.23) 500/100 6 (16.00) H16.00/ (.47) 12.0 (.47) 6.2 (.24) 7.5 (.30) 500/100 6 (16.00) H16.00/ (.59) 15.0 (.59) 6.2 (.24) 7.5 (.30) 500/100 6 (16.00) H16.00/ (.71) 18.0 (.71) 6.2 (.24) 7.5 (.30) (25.00) H25.00/ (.59) 15.0 (.59) 7.7 (.30) 9.5 (.37) 500/100 4 (25.00) H25.00/ (.71) 18.0 (.71) 7.7 (.30) 9.5 (.37) (35.00) H35.00/ (.71) 18.0 (.71) 8.7 (.34) 11.0 (.43) (50.00) H50.00/ (1.26) 32.0 (1.26) 10.9 (.43) 13.0 (.51) 100 2/0 (70.00) H70.00/ (0.98) 25.0 (.98) 13.3 (.52) 15.0 (.59) 100 3/0 (95.00) H95.00/ (1.26) 32.0 (1.26) 15.3 (.60) 17.0 (.67) 50 4/0 (120.00) H120.00/ (1.26) 32.0 (1.26) 17.5 (.69) 19.0 (.75) MCM(150.00) H150.00/ (1.26) 32.0 (1.26) 19.5 (.77) 21.0 (.83) MCM(185.00) H185.00/ (1.26) 32.0 (1.26) 21.2 (.83) 23.5 (.93) MCM(240.00) H240.00/ (1.58) 40.0 (1.58) 23.0 (.91) 25.0 (.98) 25 CRIMPER SELECTOR GUIDE See page 122. * Different standard packs are available as shown. To order the desired standard pack, please use the quantity required as a suffix to the cat. no. Example for 100 standard pack: Type H0.50/6, Cat. No / Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FA (908)
5 Dual Wire Insulated Dual Wire Ferrules have larger diameters and special shaped sleeves that accept two conductors of the same or different size. They provide an efficient connection of multiple wires in the same terminal clamp or simplify wire jumpering between terminal clamps. They are color coded with the same convention as the insulated DIN standard ferrules. To ensure efficient ferrule crimping always select the smallest ferrule diameter that fits the wire and use only professional crimping tools. (Please refer to the ordering pages and the Crimper Selector Guide on page 109.) Sleeve: polypropylene Tube: tin plated copper INSULATED FERRULES Assortment Box Handy Assortment Boxes for convenient dispensing and storage of Industry and DIN Standard Insulated Ferrules. Types AB1-S and AB1-D are equipped with five different ferrule sizes. Types AB2-S and AB2-D are equipped with four different ferrule sizes. Contents of each box is listed. Dimensions for industry and DIN standard insulated ferrules are listed on pages 106. AB1-S AB2-S DUAL WIRE FERRULES Tested According To: CSA Std C22.2 No Wire Connectors CSA Std C22.2 No. 188-M Splicing Wire and Cable Connectors ANSI/UL Std No. 486A - Wire Connectors and Soldering Lugs for Use with Copper Conductors ANSI/UL Std No. 486C - Splicing Wire Connectors Wires x AWG Cat. Stripping Length Ferrule Dimensions mm (in.) Std. (mm2) Color Type No. mm (in.) A B C D1 D2 Pk.* 2x20 (2x.50) White H2x0.50/ (.43) 14.6 (.57) 8.2 (.32) 1.7 (.07) 3.0 (.12) 5.0 (.20) 500/100 2x18 (2x.75) Gray H2x0.75/ (.43) 14.6 (.57) 8.2 (.32) 2.0 (.08) 3.0 (.12) 5.5 (.22) 500/100 2x18 (2x.75) Gray H2x0.75/ (.51) 16.4 (.65) 10.0 (.39) 2.0 (.08) 3.0 (.12) 5.5 (.22) 500/100 2x18 (2x1.0) Red H2x1.00/ (.43) 15.4 (.61) 8.2 (.32) 2.4 (.09) 3.2 (.13) 5.8 (.23) 500/100 2x18 (2x1.0) Red H2x1.00/ (.83) 25.2 (.99) 18.0 (.71) 2.4 (.09) 3.2 (.13) 5.8 (.23) 500/100 2x16 (2x1.5) Black H2x1.50/ (.47) 15.8 (.62) 8.2 (.32) 2.6 (.10) 3.6 (.14) 6.5 (.26) 500/100 2x16 (2x1.5) Black H2x1.50/ (.63) 19.6 (.77) 12.0 (.47) 2.6 (.10) 3.6 (.14) 6.5 (.26) 500/100 2x14 (2x2.5) Blue H2x2.50/ (.55) 18.5 (.73) 10.0 (.39) 3.3 (.13) 4.5 (.18) 8.0 (.31) 500/100 2x14 (2x2.5) Blue H2x2.50/ (.67) 20.5 (.80) 12.0 (.47) 3.3 (.13) 4.5 (.18) 8.0 (.31) 500/100 2x12 (2x4.0) Gray H2x4.00/ (.63) 22.0 (.87) 12.0 (.47) 3.9 (.15) 5.2 (.20) 9.0 (.35) 100 2x10 (2x6.0) Yellow H2x6.00/ (.71) 23.0 (.91) 12.0 (.47) 5.0 (.20) 6.2 (.24) 11.4 (.45) 100 2x8 (2x10.0) Red H2x10.00/ (.71) 24.0 (.94) 12.0 (.47) 6.2 (.24) 7.6 (.30) 13.4 (.53) (2x16.0) Blue H2x16.00/ (.79) 29.0 (1.14) 16.0 (.63) 8.9 (.35) 9.5 (.37) 17.2 (.68) 100/50 * Different standard packs are available for many ferrules. To order the desired standard pack, please use the quantity required as a suffix to the Cat. No. Example: Type H2x0.50/0, Cat. No /100 for a standard pack of 100 Ferrule AWG Ferrule Ferrule Ferrule Std. Qty. (mm2) Type Cat. No. Color Type Cat. No. Pk. AB1-S Industry Standard AB1-S (.50) H0.50/ Orange (.75) H0.75/ Whiite (1.00) H1.00/ Yellow (1.50) H1.50/ Red (2.50) H2.50/ Blue AB2-S Industry Standard AB2-S (.4.0) H4.00/ Gray (6.0) H6.00/ Black 20 8 (10.0) H10.00/ Ivory 10 6 (16.0) H16.00/ Green AB1-D DIN Standard AB1-D (.50) H0.50/ White (.75) H0.75/ Gray (1.0) H1.00/ Red (1.5) H1.50/ Black (2.5) H2.50/ Blue AB2-D DIN Standard AB2-D (4.00) H4.00/ Gray (6.00) H6.00/ Yellow 20 8 (10.00) H10.00/ Red 10 6 (16.00) H16.00/ Blue Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FA (908)
6 Ferrule and Wire Size by Crimper Type Use this Selector Guide to determine ferrule and wire sizes which can be crimped. Refer to ordering pages for selection and ordering information of crimpers. 1. Determine the wire size(s) to be used. 2. To insure efficient ferrule crimping, always select the smallest ferrule diameter that fits the wire. 3. Based on the ferrule size, choose the crimper type appropriate for use. 4. Select the crimper style best suited for your application. CRIMPER STYLES UNIVERSAL FERRULE CRIMPER PNEUMATIC FERRULE CRIMPER VISE MOUNT FERRULE CRIMPER Wire Size AWG Ferrule Size mm Crimper Type E E E E E * * GFCF / / / MCM Dual Wire Ferrules E crimper covers 2x20 to 2x12 AWG dual wire ferrules E crimper covers 2x10 to 2x8 AWG dual wire ferrules E crimper covers 2x6 AWG dual wire ferrules Key: = Multi-Cavity Range = Individual Cavity * Insulated ferrule/wire size range is shown, uninsulated ferrule range is AWG ( mm2). 122 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FA (908)
7 TerminalBlocks_072012(alt-2).QD_Blocks 10/23/12 9:05 AM Page 123 Custom Assemblies Available Most competitive in industry Made to your specifications Large inventory of parts Variety of colors available Custom marking tags Up to 6 custom assemblies Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FA (908)
8 Tools Universal Ferrule Crimper Front Conductor Entry One die crimps a wide range of insulated and uninsulated ferrule sizes. Three Universal Ferrule Crimpers are offered to crimp different ferrule and wire size ranges up to 16mm 2 (6 AWG). Positive ratcheting with spring return Trapezoidal crimp geometry Comfort grip plastic handle Hardened steel frame, matte black Universal Ferrule Crimper Universal Ferrule Crimper Universal Ferrule Crimper E Replacement Spring Set: Handle Spring Set Rachet Spring E Replacement Spring Set: Handle Spring Set Rachet Spring E Replacement Spring Set: Handle Spring Set Rachet Spring Ferrule Crimper Side Conductor Entry Individual crimp cavities conform to industry standard insulated and uninsulated ferrules from 25-50mm 2 (4-1 AWG). Positive ratcheting with spring return Emergency release Trapezoidal crimp geometry Comfort grip plastic handle Hardened steel frame, matte black Ferrule Crimper Ferrule Crimper Ferrule Crimper E E / MCM 124 Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FA (908)
9 Pneumatic Crimping Tool Altech's pneumatic crimping tools speed the crimping process of insulated or uninsulated ferrules for a wide range of wire sizes up to 8 AWG. Altech pneumatic crimpers are simple and easy to use. Just install the ferrule over the end of the stripped wire and insert it into either the front or side tool opening. Then touch the actuating lever or push the footswitch pedal to initiate the crimp cycle. Once the head closes it will automatically reopen after crimping. The resulting crimp features a compact trapezoidal cross section which is mechanically very strong and provides a large surface to insure a highly efficient electrical contact. Crimp ferrules efficiently and economically. A unique dual crimping head provides convenient front or side wire entry, allowing crimping from multiple positions. This features makes crimping in tight places simple. Choose either lever actuated, hand held units or hands-free footswitch operated table top models, in two basic tool sizes. Hand held models feature a flexible coil air-hose with 1/4" NPT interchange connector for quick hookup with a standard push-to-connect coupler. The table top units also include a flexible coil air hose to the footswitch and a 1/4" NPT interchange located on the footswitch for one hand push-to-connect supply hook-up. They feature a sturdy metal base with integral table clamp and dual storage trays for quick access to the ferrule supply. The air release port on the footswitch has been quieted with a sintered bronze air silencer. The footswitch has a metal frame and a tough fiberglass shroud. Its spring return pedal provides for short actuating cycles. Wire/ Ferrule Size Tool Wt. Tool AWG mm 2 Type Cat. No. g (lbs.) Std. Pk. Hand Held Crimper with Actuating Lever ACT2.5-P (.95) 1 Crimp Insulated Ferrules and Uninsulated Ferrules Hand Held Crimper with Actuating Lever ACT10-P (.95) 1 Crimp Insulated Ferrules and Uninsulated Ferrules Table Top Crimper with Footswitch and Storage Trays ACT2.5-T (2.20) 1 Crimp Insulated Ferrules and Uninsulated Ferrules Table Top Crimper with Footswitch and Storage Trays ACT10-P (2.20) 1 Crimp Insulated Ferrules and Uninsulated Ferrules Magnetic Mounting Holder ACT-DP for hand held pneumatic crimpers Counterbalance CT-DUP for hand held pneumatic crimpers Optional items for the hand held crimper include a counterbalance for maximum control and a magnetic holder for storage. Operates on psi air supply Crimp insulated and uninsulated ferrules Trapezoidal crimp geometry Flexible coil air hose with 1/4" NPT interchange Metal tool body and base Hardened steel crimp head Altech Corp. 35 Royal Road Flemington, NJ Phone (908) FA (908)
Insulated Scissors. Handles made with shock-proof plastic. Length Blade Std. Part No. Type mm shape Pk.
Cutting Tools Cable Cutter - For copper and aluminum cables only. Extremely high cutting capacity with adjustable screw joint. for cable Length Std. Part No Type Ømm mm 2 AWG mm Pk. AP1017 N 15 50 1/0
CABLE CUTTING, STRIPPING AND CRIMPING TOOLS
Cutting 38-39 Stripping 39 0 - CBE CUTTING, STRIPPING ND CRIMPING TOOS Ergonomic handles Surface protection High precision Flexibility With ergonomic handles and a specially The pliers are made of excellent
Solutions for Original Equipment Manufacturers (OEM) Connecting Power to Your World TM
Solutions for Original Equipment Manufacturers (OEM) Connecting Power to Your World TM The Right Fit At BURNDY, we pride ourselves on developing solutions. In fact, we thrive on challenge. When our customers
Induction hardened cutting knives for long life. Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. Electrician's (EINS)
CONNECTORS FROM THE GREAVES ADAP T ER Z O N E
AGE 9 CONNECTORS FROM THE GRVES ADA T ER Z O N E When the cable doesn t fit, you need a solution fast What can you do when dealing with new or relocated equipment, spec changes, and/or mismatched parts
Aviation Snips. Multi-Cable Cutter
CUTTING tools Aviation Snips 0653-01L Drop-forged, chrome-moly steel blades with serrated edges. Includes left, right and straight-cut versions with color coded grips green (right), yellow (straight),
Insulated Tools. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Insulated Tools r o f e s s i o Klein insulated tools maintain the highest level of quality Klein is known for, and they offer added protection against shock from energized sources with voltage
Electrician's Insulated Tools
Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. ~ Electrician's FORGED
Slit Loom Installation Tool. Spools and Bags. Bulk Boxes
Looms and Tubing Polyethylene Slit Loom Slit seam construction allows for easy wire insertion and repair, yet retains wire even when bent or twisted. Maximum temperature 93 C (200 F). Ideal for protecting
WIRING INSTALLATION. Heat Shrink Tubing. Steel Fish Tapes - 1/8'' wide. Fiberglass Fish Tape / (Black) (Asst colors)
902-355/902-460 Heat Shrink Tubing Used for electrical insulation, bundling, and wire identification purposes in a variety of home, commercial, and industrial applications. Slides ealily over small inline
Knives, Cutters & Scrapers
Knives, Cutters & Scrapers - 261 - Utility Knives T23216 T232 T23218 Snap-Off Knives SK4 Steel blades Stores up to 3 replacement blades Blade sections snap off providing sharp cutting point Stainless steel
Counter Display Items
1/4" Dr. x 3/8" Dr. Dual Drive Stubby Ratchet Part No. 640923 Dual drive 2 in 1 design Compact size is great for fasteners in tight areas Black composite coating with TPR injection handle for comfort 272504
Rittal Automation Systems
Do more, improve quality, increase revenue The business unit with its portfolio of services supports all process stages in control and switchgear engineering. From manual tools through to fully automated
Terminals & Connectors
Your Connection Since 1970 Terminals & Connectors 2 TABLE OF CONTENTS Adapters........................... 13 Brazed Barrel Lugs................... 16-17 Bullet Connectors....................9-10 Butt Connectors.......................3
Ground Clamps Cable Tray
COMMERCIAL AND INDUSTRIAL FITTINGS: GROUNDING FITTINGS AND SOLDERLESS CONNECTORS Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both
Insulated Tools S 9 R O T E CTI Y N
Insulated Tools Klein insulated tools maintain the highest level of quality Klein is known for, and they offer added protection against shock from energized sources with voltage up to 1000 volts. Insulated
inside diameter wire part no. color length I.D. after recovery gauge red Single Wall Polyolefin 2:1 Shrink Tube - Flexible
PVC 2:1 Shrink Tube Use to insulate terminals after the terminal has been crimped to the wire. Tubing remains flexible and will shrink to approximately 50% of its original size when 160 C (320 F) heat
Application Tooling Specification
Order No. 200218-3100 FEATURES Application Tooling Specification A full cycle ratcheting hand tool ensures complete crimps Long handles for comfortable crimping with reduced crimping force and a safety
IB 7/40 Classic. Automatic residual ice discharge. Outstanding mobility. Efficient airflow in the device. Clear display
IB 7/40 Classic Thanks to airflow optimisations, our Ice Blaster IB 7/40 impresses with excellent results during dry ice cleaning, even when working with low air pressures. Compact device. 1 Automatic
Grounding Clamp. Pins and Ball-Socket Clamps for Temporary Grounding
Grounding Clamp Pins and Ball-Socket Clamps for Temporary Grounding Pins and Ball-Socket Clamps have been designed to solve several temporary grounding situations, where the physical space or the contact
IB 15/120. Nozzle case holder. Automatic residual ice discharge. Glass-fibre reinforced plastic dry ice container. Outstanding mobility
IB 15/120 The Ice Blaster IB 15/120 is one of the most powerful dry ice blasting machines on the market. It impresses with its robustness, highly reliable technology and the best results in dry ice cleaning.
PARTS LIST CHARGER 2022 ABLT
PARTS LIST CHARGER 2022 ABLT HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 5990731 SPRING CLIP PAD HOLDER SET INCLUDES: 1 101A 9120205 #8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW PACK OF 3 3 102 9121490
Insulated Screwdrivers and Nut Drivers
Insulated Screwdrivers and Nut Drivers Features: Klein insulated tools meet or exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and are clearly marked with the official 1000-volt rating
HAND TOOLS. Combination Wrenches 120/1. Combination Wrench Sets 120/1CB. Adjustable Wrenches 250/1. Hexagon Wrenches 230/3SL.
Combination Wrenches 120/1 Unior wrenches are made of quality chrome vanadium steel. They are available in two lines: chrome plated with polished heads or chromium plated only. Wrenches are functional
Lucky Line. C-Clip rings, plastic key clips & KEY BAK. Plastic Key Clips. Key Bak. Super 48 Key Bak
C-Clip Rings ucky ine C-Clip rings, plastic key clips & KEY BAK Spring-loaded gate makes it easy to open and close with one hand Clips to belt or purse Made of anodized aluminum 460 has a 7/8 nickel-plated
KEEP IT TOGETHER WITH MALMER
KEEP IT TOGETHER WITH MALMER STRAP TOTE STEEL STRAPPING Steel strapping is produced with state-of-the-art technology and rigid quality inspections to assure a superior finished product. Steel Strapping
EJ Beverage. An Eldon James Company. Quality Tubing and Connectors
EJ Beverage An Eldon James Company Quality Tubing and Connectors 3 Food and Beverage Applications EJ Beverage offers a full line of tubing and connectors for a wide variety of food and beverage applications.
TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PINS & BUSHINGS INCH www.danly.com PINS & BUSHINGS INCH Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer of die sets and
Fluke Networks offers a wide range of network installation tools each one designed to streamline the network installation job
Insert Section Name Tools and Test Kits Fluke Networks offers a wide range of network installation tools each one designed to streamline the network installation job Fluke Networks offers the most reliable
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. One-piece connector body: Fastest assembly Field installable Anaerobic epoxy
KITS P /2/01 4:40 pm Page 29 Kits 29 #
29# Kits Clip-On Twisted Pair Kit The Clip-On Twisted Pair Kit combines the most commonly used tools for terminating voice and data cabling into an easy to carry kit that mounts on the contractor s belt.
Fiber Optic Hand Tools
Fiber Optic Hand Tools Miller Fiber Optic Hand Tools FO 103-T-250-J Tri-Hole Fiber Optic Stripper New three-hole model performs all common fiber stripping functions in one compact tool. Hole for removal
MASTER LOCK MASTER LOCK
PADLOCKS & ACCESSORIES Laminated 1-3/4" wide laminated steel body for superior strength hardened steel shackle for extra cut resistance 4-pin cylinder helps prevent picking dual locking levers provide
Fish Tapes & Conduit Tools
F o r P Fish Tapes & Conduit Tools r o f e s s i o n a l s. Working with conduit can be a difficult task, especially if you are not well-equipped to tackle the job. Klein s entire line of conduit tools
get connected with Bradford fittings & valves Bradford Company, Inc
get connected with Bradford fittings & valves Bradford Company, Inc. 800.789.1718 www.bradfordfittings.com Bradford your top quality, sanitary stainless steel fittings & valves manufacturer serving you
Smallest Connector with Removable Contacts
1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative
Stainless Steel Cable Ties
Stainless Steel Cable Ties Stainless Steel Cable Ties Ty-Rap Polyester-Coated Stainless Steel Ball-Lock Cable Ties Designed for continuous exposure to salt spray, sunlight, petroleum and chemicals! Stainless
made in germany What s NEW 2012 Exclusively distributed by Tridon
made in germany What s NEW 2012 Exclusively distributed by Tridon www.tridon.com.au twinforce NEW Twinforce - The Superior High Leverage Diagonal Cutter n ideal transmission of force due to double-hinged
Safe - Spirals Protection for Hydraulic hoses
Safeplast NA Company, Ltd. Safe - Spirals Protection for Hydraulic hoses Safeplast hose protectors provide safe and economic protection of hydraulic and pneumatic hoses thereby reducing machine downtime
Tool Sets. Tool Sets. 41-Piece Journeyman Tool Set. Cat. No. Set Contains Weight (lbs.) WARNING: Do NOT use screwdrivers to pry or chisel.
Some projects are more complex than others and require a variety of tools to be used. For this reason, Klein has tool sets to assist professionals with these demanding projects. 41-Piece Journeyman Tool
BERNSTEIN TOOLS FOR ELECTRONIC
BERNSTEIN TOOLS FOR ELECTRONIC Bernstein Tools pliers, safety tool, sets and suitcases Safety Pliers Safety Wrenches Safety Tools Content Tools Sets and suitcases... 4 Safety insulated pliers... 12 Safety
Knives & Cutting Tools
Knives & Cutting Tools Klein provides a wide range of knives, scissors and other cutting tools for professional applications across all trades. Pocket Knives One Blade Lightweight Lockback Knives Blades
Fish Tapes. Length marked! Now laser etched in 12 increments to provide instant conduit length. n Industry leading durability
Fish n Industry leading durability n Wide variety of tapes and cases to meet your specific needs n Available in Blued Steel, Stainless Steel, S-Class, Gold-Fish, Zoom and Volt-Guard to meet all industry
34070 Sec13 SpecialtyV1 6/21/03 12:17 PM Page 339 SPECIALTY TOOLS 13
SPECIALTY TOOLS 13 TELESCOPIC MAGNETIC RETRIEVING TOOL Versatile telescoping handle and all-angle ball joint. 2375 16-3 4" to 26-3 4".40 Fed l Specs.: GGG-F-360B INSPECTION MIRRORS Versatile all-angle
Wire and Cable Holders
WIRE MANAGEMENT Wire and able Holders For low cost wire management. The push-mount style comes in vertical orientation for top entry and narrow width, and horizontal orientation for side entry and low
PNEUMATIC TOOLS FOR PLASTIC APPLICATIONS
PNEUMATIC TOOLS FOR PLASTIC APPLICATIONS GATE CUTTING - DEGATING - ROBOTICS / AUTOMATIC INDUSTRIAL - MEDICAL - ELECTRONICS - EDUCATIONAL - GOVERNMENT CALL TOLL-FREE: 888-444-1202 WEBSITE: www.custom-products.com
Amphenol RF Interconnects TNC 31 Series Threaded Lock RF Connector System Materials
TNC 31 Series Threaded Lock RF Connector System Materials Body/Finish Contacts Centre MALE Centre FEMALE Insulator Gasket Crimp Ferrules* *Metal finishes Durability Brass/Nickel Brass/Gold Plated (Au)
SIN GLE BOND HOSE CLAMPS
Sec. 24 YOKE ENDS & HOSE CLAMPS Zinc Fin ished Drop Forged Yoke Ends Ad just able Auveco T Dimensions In Inches Unit Part No. Tap Size A B C D E F G H K Pkg. 10737 1/4-28 2 7/16 7/16 1-1/4 9/32 5/8 1/4
Safe - Spirals Protection for Hydraulic hoses
Safeplast NA Company, Ltd. Safe - Spirals Protection for Hydraulic hoses Safeplast hose protectors provide safe and economic protection of hydraulic and pneumatic hoses thereby reducing machine downtime
VDE 1000V Insulated Tools
Tools Safety Caution 189 Insulated VDE Pliers PM-910 Insulated Wire Stripping Plier Certified to IEC 60900, VDE, DIN 1,000V safety standards and bear GS sign. High visibility molded ergonomic cushion handle
Installation and Maintenance Manual
Freestanding Gas Stove MODEL: PGS2005 GPEBB20R GPEBW20R Installation and Maintenance Manual Warning Maintenance products should be carried out by professional and technical personnel with relevant qualification,
After wrapping the object to be tied, insert the free end of the tie through the buckle and into the tool.
After wrapping the object to be tied, insert the free end of the tie through the buckle and into the tool. The tail is formed into a fold lock behind the buckle The tool forces a dimple in the band into
Precision Pliers. Mini Lineman's Plier. Long Nose Plier. Needle Nose Plier. Diagonal Cutting Plier. PM-754 Flat Nose Plier PM-755 Bent Nose Plier
18 19 20 .55.25.78 PM-731.50 PM-737 Mini Lineman's Diagonal Cutting.29 1.5 PM-736 2.1 PM-746 Long Nose Needle Nose Precision s High quality carbon steel S45C forged made hardened and finished with nickel
Premium Cutters for Plastic Gate
Premium Cutters for Plastic Gate Slim Line Rounded Nipper Slightly Rounded Jaws for a Slightly Rounded Cut Slim Profile Blades Wishbone Style Spring Reduces User Fatigue SNP Model Flat Nipper Flat Back
FOREWORD CONTENTS. 1. Preparation and tools required for assembly. 2. Complete parts
CONNECTOR ASSEMBLY INSTRUCTION MANUAL FOREWORD Thank you for purchasing FOCI s MT-RJ Optical Fiber Connectors. We are confident that our excellent manufacturing procedures and stringent quality control
Upchurch LOW PRESSURE FITTINGS AND CONNECTORS
AND CONNECTORS Flangeless Fittings Upchurch Flangeless Fittings Upchurch Scientific Flangeless Fittings eliminate the need to flange tubing. This removable and reusable system provides several benefits:
SPECIAL-TWEEZERS FOR THE SMD-TECHNIQUE
SPECIAL-TWEEZERS FOR THE SMD-TECHNIQUE high precision tweezers from special steel stainless matt finish anti magnetic acid resisting - alternative with ESD coating (-13) - Finish Weight 5-049 110 4 3 /8''
Section 4 Strapping & Accessories
Section 4 Contents Cable Ties...114 Edge Protectors...111-112 Lashing...113 Poly Strapping...101-102 PET Strapping...109 Poly Strapping Tools...103 Poly Woven Strap...104 Rope...113 Strapping Seals...98-99
CABLE GRIPS CABLE GRIPS
STRAIN RELIEF Deluxe cord grips are woven of stainless steel mesh with an anodized aluminum body for corrosion resistance. They are offered in single/double weave construction to help absorb direct pull,
SECTION I-1. Type: 1812-AC. Fuel: Air-Gas.
RADIANT LINE BURNER. SECTION I-1. Type: 1812-AC. Manufactured from a heat resisting cast alloy with a ceramic front face, this radiant burner type is ideally suited for use in Infrared Heating production
General-Use Auto-Tuning HPX-T Series
General-Use Auto-Tuning HPX-T Series Built-in Hyper-tuning automatically adjusts scanning characteristics. Adjustment steps, results and scanning conditions are digitally displayed by LED. Digital display
Tool Sets. Tool Sets. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Some projects are more complex than others and require a variety of tools to be used. For this reason, Klein has tool kits to assist professionals with these demanding projects. s s i o
Screwdrivers & Fastening
& Fastening 115 5 Kincrome Featuring New S3 SVCM Alloy Steel, the new design orquemaster Screwdriver incorporates a Hexagonal shaft for those occasions when extra torque is required. he S3 shaft has been
2843 Centerport Circle, Pompano Beach, Florida USA Toll Free: Direct: Fax:
STC1110-RF ULTRAGRIP, 8.2 MHZ RF, ONE PIECE LANYARD AND TAG The UltraGrip is a one piece tag with a 5.90 (150 MM) lanyard combination that saves time during application and removal. It s compatible with
Zinc Cable & Conduit Connectors For Armored Cable, Flexible Metal Conduit & Metal Clad Cable
Zinc Cable & Conduit Connectors For Armored Cable, Flexible Metal Conduit & Metal Clad Cable Type FC Set Screw To terminate regular wall steel or aluminum flexible conduit to a 1/2 knockout in a dry location
Emergency Stop Devices
New! Selection and Application of.. 278 Emergency Stop Rope Pull Switches........... 279 New! Emergency Stop Push Buttons............... 293 Banner Engineering Corp. Minneapolis, MN U.S.A. bannerengineering.com
Go4Fiber Tool Kit (Contractor / Basic / Splice / Connectorization)
Go4Fiber Tool Kit (Contractor / Basic / Splice / Connectorization) 01 Go4Fiber focuses on the quality as well as the performance of the kit instead of just putting together economical items to reduce cost.
Hand Tools. Contents MADE FOR THE TRADE!
The success of Greenlee's professional hand tools continues to grow with an even larger collection of products. Each Greenlee hand tool is "Made for the Trade" and each kit and accessory has been carefully
TOOLS TOOLS. Chapter Summary All the tooling required to terminate optical fiber and twisted pair connectors
TOOLS Tools Fiber Optic Tool Kits......................... 170-173 Epoxies and Accessories...................... 173-175 Microscopes................................ 176-177 Fiber Optic Tools and Accessories...............
Mitchell. Furniture Systems
Mitchell Furniture Systems Withstand the Test of Time Many of our tables are still in use after 40 years. They last that long because we simply build them better. More Steel Our tables have a solid feel
This section shows our line of hand hacksaws, including our new bi-metal unique blades, hacksaw frames, PVC and compass saws. HAND SAWS AND BLADES
This section shows our line of hand hacksaws, including our new bi-metal unique blades, hacksaw frames, PVC and compass saws. HAND SAWS AND BLADES Bi-Metal Unique Saw Technology Decades ago, bi-metal blade
WRANGLER 1710AB, 2010AB
WRANGLER 1710AB, 2010AB WIRING DIAGRAM ITEM PART NO. DESCRIPTION QTY 1 1393251 WIRE ASSEMBLY - CIRCUIT BREAKER TO BRUSH SWITCH 1 2 1393261 WIRE ASSEMBLY - CIRCUIT BREAKER TO VACUUM SWITCH 1 3 1393271 WIRE
After wrapping the object to be tied, insert the free end of the tie through the buckle and into the tool.
After wrapping the object to be tied, insert the free end of the tie through the buckle and into the tool. Squeeze the handle of the tool to create the dual lock and cut off the tail. The cable tie forms
PARTS LIST eforce Burnisher
PARTS LIST eforce Burnisher HEAD ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 6496721 MOTOR 36 VOLT, 2100 RPM, 3.6HP [see pages 16,17] 1 102 9121410 5/16 EXTERNAL STAR LOCK WASHER PACK OF 10 2 103 6492051
Facemask. Multi-Adjustable. Discover The Ideal Choice to Achieve Maximum Class III Compliance. Exclusive Patient Comfort Design KEY FEATURES
Multi-Adjustable Forehead Rest with Ergonomic Dual Free-Flow Air Vents Vertical Main Frame Metal Reinforced Horizontal Crossbar Durable Screws Throughout Chin Cup with Ergonomic Streamlined Design, Free-Flow
ROLLATORS. Seat. Height. Adjustment GREEN X 1 1/4 32 1/2 X 36 1/ / KG 120 KG. Height. Seat. Height.
ROLLATORS DELUXE ALUMINUM ROLLATOR WITH LOOP BRAKES Suitable for indoor and outdoor use with height adjustable handles, converse handle with backrest belt. Loop brakes that can be locked to ensure safety.
2pcs/pack. Auto Loading Utility Knife. Electrician's Knife Carton Cutter Utility Folding Knife Utility Cutter
38 3 902-253 Utility Folding Knife 902-253 902-318 Utility Cutter 2 1 locks with 3 positions : 902-261(100pcs/pack) 902-317 Carton Cutter Carton cutter Scraper 2pcs/pack All metal made cutter and cover
ATTACHMENT POINTS. Did you know? OR VISIT Tool Collar Kits (U.S. Patent No. 8,567,290 & 8,567,291) Plastic Tool Collar Kits
Tool Collar Kits (U.S. Patent No. 8,567,290 & 8,567,291) Mounts on the shaft allowing full use of the butt end 360 degree mobility Fits a wide range of screwdrivers and shaft style tools Quick installation
Visit us at 5170 N 125th St. Butler WI or online at 197
Never uses a clamp Lightweight and durable Smooth elastomer inner tube 250 psi operating pressure Temperature range -40 F to 300 F Sold by running foot Textile braid reinforcement available in Black and
LSC19 Lighting Cable Assemblies and Connectors
PowerFLEX Cable Assemblies PowerPARTS Wiring Devices ISO 9001:2008 LSC19 Lighting Cable Assemblies and Connectors PowerFLEX and PowerPARTS Introducing a new generation of Lex Products 19 pin, 6-circuit
Pro 88/86. The classic torch system. All components are carefully chosen to guarantee long service life. Ergonomic designed handles
The classic torch system All components are carefully chosen to guarantee long service life Ergonomic designed handles Works in all weather conditions Wide range of burners for all applications Pro 88
BARE FIBER OPTIC TERMINATOR
BARE FIBER OPTIC TERMINATOR Reusable Terminator for Single Mode and Multimode Fiber FC/PC, FC/APC, SMA905, ST /PC, SC/PC, or LC/PC Compatible Connectors Terminator Accepts Bare Fiber up to Ø1400 µm Application
Dry Ice Blasting Unit
Dry Ice Blasting Unit ASCO Nanojet complete (fully adjustable) part no. 900910 & 4064272 The ASCO Nanojet has been specially developed for the plastics industry. It has an integrated pellet grinder in
I- 39. Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General Information and special features.
Liquidtight Connectors and Hubs for Liquidtight Flexible Metal Conduit General nformation and special features. - 39 Seal out oil, water, dirt, dust and fumes wherever liquidtight flexible metal conduit
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand Jokari Product Range Cable/Wire strippers Catalogue number 10160, 10270, 10271, 10280, 10282, 10283, 20030, 20050, 20060, 20090, 20100, 20300, 20310, 20450, 30010, 30100, 30120,
Volta Belting Technology Ltd. Version no 8. Special. Tools Catalogue. The Next Step in Belting
Volta Belting Technology Ltd. Special Tools Catalogue Version no 8 The Next Step in Belting Volta Belting Technology Ltd. Tools Catalogue Volta Belting Technology has been manufacturing TPU (Thermoplastic
SPINNER RACK. Additional 50 pack of stock re-order cards available. Order Part # Master Carton Boxes lbs.
PAGES 82 THRU 84 ACCESSORIES SPINNER RACK SPINNER RACK BATTERY ACCESSORIES & ELECTRICAL CENTER One stop display for your battery accessories and electrical wire needs. Keep a complete line of products
Crimp & Cleave Termination Instructions
Your Optical Fiber Solutions Partner Crimp & Cleave Termination Instructions for 200 µm Harsh Environment SMA For Use With: 200 µm HE SMA Termination Kit 200 µm HCS Fiber-Optic Cable HE SMA 200 µm Crimp
FALL PRO TOOLS. Measure, Level, Cut and SAVE NOW! 2018 PROMO Ask your distributor for details! Jobsite Tools Hole Saws Recip Blades
FALL PRO TOOLS 2018 PROMO Ask your distributor for details! The Pro s Tool of Choice. Measure, Level, Cut and SAVE NOW! Jobsite Tools Hole Saws Recip Blades Sale runs through November 30, 2018 SAVE UP
11 12 STORAGE 15 AND 15 ETS S
11 12 15 15 16 17 9S ETS AND STORAGE BOST storage Variable capacity organizer Cover opens at 180 Bimaterial ergonomic handle Tool holder tray 10 PREMIER PACK Premier pack Initial equipment set with 15
Section i. Tooling. Hydraulic Crimping Tools Hydraulic Pumps and Hole Punches. Cable Tie Tensioners Pliers and Side Cutters
Section i Tooling Crimping Tools Hydraulic Crimping Tools Hydraulic Pumps and Hole Punches Hand Cutters Hydraulic Cutters Strippers Cable Tie Tensioners Pliers and Side Cutters Screwdrivers Screwdriver
CRD120SC TUBING CUTTER
CRD120SC TUBING CUTTER OPERATIONS MANUAL 1 VERSION 2.1 LAST EDITED 05.01.2018 cleanroomdevices.com Table of Contents Table of Contents....2 1.0 General Product & Safety Information... 3 1.1 Product Information
BRENCO. Wire Strippers. Bucket Hooks. Load Break Elbow Probe Insertion Tool with 125 in-lb torque delivery system - PIT 1T
130 Wire Strippers Bucket Hooks Load Break Elbow Probe Insertion Tool with 125 in-lb torque delivery system - PIT 1T SH-1 SH-4 *For 15 TO 34.5 kv elbow - small interface *For quick and easy insertion of
ACCESSORIES OUR PARTS PUT YOU IN THE PASSING LANE. Yep, it's in here. AC1. velvac.com
OUR PARTS PUT YOU IN THE PASSING LANE ACCESSORIES Yep, it's in here. From wiper blades to emergency triangles, if you couldn't find what you were looking for in the other sections of our catalog, it's
Termination Procedure LC 1.6mm & 2.0mm Connectors: 1060XX Series
Connector Piece Parts LC Simplex Connector Boot LC Duplex Connector LC Connector CriMp Tulolng LC Duplex Clip Boot 86001-0110, Rev. B USN30MFO/5/2010 Procedure Chart Procedure Tool Required Tool Part Number
THE HOME OF LINEMAN INNOVATION
THE HOME OF LINEMAN INNOVATION Decrease outages, minimize open neutrals and bad connections, & create significant savings by brushing conductors properly! MORE DURABILITY Blunt edges and tip THE MOST INNOVATIVE
Spring Hinge DA180 Technical Data Aluminium, Zinc, 304 & 316 Stainless Steel Anatomy of a Double Action Spring Hinge:
Spring Hinge DA18 Technical Data, Zinc, 4 & 16 Anatomy of a Double Action Spring Hinge: DA18 Adjustment Instructions: Model Adjustment Cap Tensed fastening pin Model Adjustment Cap Tube 4 or 16 SS Torsion
Top safety guaranteed. Precisely adjusted cutting depth. Visible cutting progress
WIRE STRIPPING TOOLS 0 Exchangeable hook blade system This revolutionary knife makes short work of stripping 0 mm ø cables using an exchangeable hook blade system. Changing the various blades is easy using
Engineered to Perform PAINT & AUTOMOTIVE PRODUCTS
Engineered to Perform PAINT & AUTOMOTIVE PRODUCTS 2017 INNOVATIVE. INVENTIVE. INSPIRED. For over 140 years, from the time the original Star Razor Company moved to the heart of the Shenandoah Valley, our
FIBER OPTIC CLOSURES
FIBER OPTIC CLOSURES In-line type and dome type - series CLS-I, CLS- IF2X, CLS-D, CLS-DF2X144 and CLS-DF2X240 PACIFIC INTERCONNECTIONS - connecting the world with fiber optics IN-LINE TYPE FIBER OPTIC