OUTDOOR CRAB COOKER SET

Transcription

1 OUTDOOR CRAB COOKER SET ASSEMBLY AND OPERATION INSTRUCTIONS IMPORTANT READ THESE INSTRUCTIONS FOR USE CAREFULLY. FAMILIARISE YOURSELF WITH THE APPLIANCE BEFORE CONNECTING IT TO A GAS CONTAINER. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

2

3 Outdoor Crab Cooker Set Warranty Details Hark Enterprises Pty Ltd warrants that this genuine HARK brand product is free from defects in workmanship and materials for 12 months from the date of purchase. If as a result of normal use in compliance with the manufacturer s instructions the product fails to operate within the warranty period, we will repair or replace the product. This warranty does not extend to cover any damage due to burn out or rust. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The benefits given to you in this warranty are in addition to other rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws. In the event of a product failure, the goods should be returned at your cost to the original place of purchase, with specific details of the complaint, and a copy of the purchase receipt. After Sales Support Telephone: sales@hark.com.au YEAR WARRANTY

4 4 Model No.: HK0516 Product Name: OUTDOOR CRAB COOKER SET - For propane (LPG) use only. Line drawings are not to scale. Actual products may differ from drawing depending on the model purchased. Specifications are subject to change without notice. HAZARDOUS FIRE OR EXPLOSION MAY RESULT IF INSTRUCTIONS ARE IGNORED. It is the consumer's responsibility to see that the Crab Cooker Set is properly assembled, installed, and taken care of. Failure to follow instructions in this manual could result in injury and/or property damage. FOR YOUR SAFETY If you smell gas: 1. Shut off gas to the appliance. 2. Extinguish any open flame. 3. If odour continues, immediately call your gas supplier or your local fire department. PRECAUTIONS 1. Leak test all connections after each tank refill. 2. Never check for leaks with a match or open flame. 3. Do not store or use gasoline or other flammable vapours and liquids in the vicinity of this appliance. FOR OUTDOOR USE ONLY. PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING. RETAIN THIS MANUAL FOR FUTURE REFERENCE.

5 EXPANDED VIEW 5 Parts List NO. Name QTY 1 Base 1 2 Burner 1 3 Hose & Regulator 1 4 Heat shield 1 5 Base ring 1 6 Leg (x 3) 3 7 Stability bracket (x 3) 3 8 Pot 1 9 Lid 1 10 Basket 1 11 Temperature gauge 1 12 Lifting Hook 1 Hardware List Name QTY M6x10 screw 12pcs Tools needed for assembly Adjustable Wrench and Phillips Head Screwdriver (not included) Before assembly Please read all instructions thoroughly before proceeding. Find a large, clean area in which to assemble your Crab Cooker Set. Please refer to the parts list and assembly diagram as necessary. Ensure any transit protection or packaging is removed. Do not throw out any packaging until Crab Cooker Set is fully assembled in case parts are still enclosed. M6 Nut 12pcs

6 6 A. ASSEMBLY OF THE CRAB COOKER STEP 1 SECURING THE CAST BURNER TO THE BASE Place base (1) upside down on an even surface. The wider ring of the base should be facing down ward. Locate the burner mount bar stretching across the narrower ring of the base. Remove the nut from the bottom of the cast burner (2). From the bottom side of the burner mount bar, place the cast burner into the groove in the center of the bar. The screw on 4 the cast burner should fit through the hole in the center of the mount bar. The cast burner should be positioned towards the side of the base with the cutout section. The Heat Shield (4) must be installed before placing the nut on the burner post and tightened. Fasten the cast burner screw securely to the burner mount bar with the nut. Burner Mount Bar 1 2 NOTE: The serrated washer that is attached to the nut, should make contact with the heat shield. 6 STEP 2 LEG ASSEMBLY Locate 3 x legs (6) Join each of the legs to the base ring, so that the two holes of each leg are aligned with each set of two holes on the base. When in position, the legs should be projecting outward from the center of the base. Securely fasten each leg to the base with two M6x10 screws and M6 nuts per leg. The screws should be inserted from the outside towards the center of the ring. 6 6

7 STEP 3 METAL BASE RING ASSEMBLY Insert the metal base ring (5) in between all three legs so that each of three holes on the ring match up with each hole at the end of the legs. Securely fasten the ring by inserting a M6X10 screw into each hole and tightening with a M6 nut. The screws should be inserted from the center of the ring outward. 7 5 STEP 4 STABILITY BRACKET ASSEMBLY Attach 3 stability brackets (7) to the Metal base ring as shown with an M6x10 screw and M6 nut. The screws should be inserted from the center of the ring outward. Note that the T shape faces outward from the ring STEP 5 HOSE/REGULATOR ASSEMBLY Return the base to the upright position allowing the unit to stand on its newly assembled legs. Carefully insert the threaded orifice end of the hose and regulator (3) into the center of the narrow end of the burner venture (2) and carefully turn clockwise until tight and secure. You may need a shifter to tighten the last section of the nut, BUT DO NOT OVER TIGHTEN. 3 2

8 8 B. THE GAS SYSTEM 1. GAS AND REGULATOR INFORMATION This cooker is designed for propane (LPG) gas use only. Gas bottles with a "POL" connection are to be used with this Crab Cooker Set. Suitable regulators must have an outlet pressure of 69 kpa. You must have the proper regulator and bottle in order for the Crab Cooker Set to operate safely and efficiently. Ensure that a 100% propane (LPG) refillable gas cylinder currently certified to Australian Standard AS2030.1:2009 is used. Do not use disposable gas cylinders. Please note the hose and regulator supplied with this unit are of an approved type and are specifically designed for use with your Crab Cooker Set. It may be hazardous to attempt to fit other types of Gas containers. 2. CONNECTING THE HOSE AND REGULATOR TO THE GAS BOTTLE Only use the hose assembly (3) supplied with this appliance for direct connection to the cylinder DO NOT USE ADAPTORS. Do not use any other hose assembly. Check the gas hose for damage or signs of abrasion before each use. Keep the hose clear of sharp edges and hot surfaces. Avoid twisting or kinking the flexible hose. If damaged, do not use the hose and replace it immediately. If there is any doubt, contact the customer service line on Make sure all Crab Cooker Set control knobs are in the off position. Connect the regulator to the gas cylinder by inserting the regulator connection into the gas bottle outlet. This is tightened in an anti clockwise motion. Firmly hand tighten and then be sure to check for leaks at all gas connections. Please note that the hose is already fitted with a valve that connects to the burner. You do not have to adjust this connection but should leak test this once the hose and regulator are connected to the gas cylinder. Gas Bottle 3

9 3. LEAK TESTING Open the gas control valve on the cylinder. Check for leaks by brushing a solution 1/2 water and 1/2 soap over all gas system joints, including all valve connections, hose connections and regulator connections. DO NOT USE AN OPEN FLAME to test for leaks at anytime. If bubbles form over any of the joints, there is a leak. Turn off the gas supply and re-tighten all joints. If bubbles form again, do not use the Crab Cooker Set. Please contact the customer service line on Check for leaks annually or whenever the hose and regulator are disconnected from the gas cylinder. 9 FOR STORAGE AND CYLINDER EXCHANGE, DISCONNECT THE CYLINDER ONLY. DO NOT DISCONNECT HOSE FROM APPLIANCE. C. INSTALLATION 1. CHOOSING A LOCATION This Crab Cooker Set is for outdoor use only and should be placed in a well-ventilated area. Take care to ensure that the Minimum clearances: From sides: 1000mm, From back: 1000mm, From above (vertical): 1000mm. Keep this Crab Cooker away from any flammable materials! 2. OTHER PRECAUTIONS Do not obstruct any of the ventilation openings in the Crab Cooker body. Also, position the gas supply cylinder on level ground next to the Crab Cooker Set and safely away from any source of heat. Should you need to change the gas cylinder, confirm that the cylinder is off, and that there are no sources of ignition (cigarettes, open flame, sparks, etc.) near before proceeding. Be sure to inspect the gas hose and ensure it is free of any twisting or tension. The hose should hang freely with no bends, folds, or kinks, which could obstruct the free flow of gas. Apart from the connection point, no part of the hose should touch any hot parts. Inspect the hose before use. If the hose is damaged, it must be replaced with a hose from the manufacturer. The length shall not exceed 1.5m. Should minimum clearances not be adhered to severe flare up may be experienced due to a lack of airflow around the Crab Cooker Set, thus voiding manufacture s warranty.

10 10 D. OPERATION WARNINGS This Crab Cooker Set should not be used indoors. USE OUTDOORS ONLY. Read the instructions carefully before using the appliance. Caution: Accessible parts may be very hot. Keep young children away. This appliance is not intended to be installed or used on a recreational vehicle or marine environment. This appliance must only be serviced by an authorised person. ONLY USE IN WELL VENTILATED AREAS. CARBON MONOXIDE HAZARD-THIS APPLIANCE CAN PRODUCE CARBON MONOXIDE WHICH HAS NO ODOUR. USING IT IN ENCLOSED SPACE (FOR EXAMPLE CARAVAN,TENT, CAR, MOBILE HOME) MAY CAUSE DEATH. SAFETY TIPS Please observe the following points before using the Crab Cooker: Ensure Crab Cooker is placed on horizontal surface. DO NOT move appliance whilst in operation. Never leave Crab Cooker unattended when hot or in use. DO NOT modify this appliance. Turn off the gas supply at the gas cylinder after use. Do not tamper with any parts. Any modification of this appliance is dangerous and will nullify any warranty. The use of protective gloves is recommended when cooking or handling any parts of the Crab Cooker while it is hot or in use. In the event of a gas leak, shut off gas supply immediately and extinguish any flames. Contact your local dealer. DO NOT USE THIS APPLIANCE IF IT IS LEAKING, DAMAGED OR DOES NOT OPERATE PROPERLY IF THERE IS A LEAK ON YOUR APPLIANCE (SMELL OF GAS), IMMEDIATELY ATTEMPT TO TURN OFF THE CYLINDER VALVE. REMOVE THE APPLIANCE TO A WELL-VENTILATED LOCATION AWAY FROM ANY IGNITION SOURCE. CHECK FOR LEAKS USING SOAPY WATER. DO NOT TRY TO DETECT LEAKS USING A FLAME GAS CONTAINERS SHALL BE CHANGED IN A WELL-VENTILATED LOCATION, PREFERABLY OUTSIDE AWAY FROM PEOPLE AND ANY SOURCE OF IGNITION, SUCH AS NAKED FLAMES, PILOT FLAMES, ELECTRIC HEATERS/EQUIPMENT

11 E. LIGHTING THE BURNER 11 Insure that the regulator control valve is in the off position. Slowly rotate the gas cylinder valve anti-clockwise to the on position. Using a long BBQ match or gas lighter for safety, insert a flame underneath the wind shield to the burner. Slowly rotate the regulator control valve to the on position until the burner ignites. If it takes more than five seconds for the burner to ignite, rotate the regulator control valve to the off position, then the cylinder valve to the off position and repeat the lighting process. IN THE EVENT THAT THE BURNER DOES NOT LIGHT AFTER 3 ATTEMPTS, DO NOT RELIGHT THE BURNER FOR FIVE MINUTES. THIS ALLOWS THE REMAINING FUMES TO CLEAR. As soon as the flame is lit, the regulator control can adjust the heat setting of the burner. To increase the heat output the regulator control valve is turned in a clockwise direction marked with the on arrow and to reduce the heat output the regulator control is turned in an anti-clockwise direction marked with the off arrow. TURNING THE BURNER OFF If the burner is no longer to be used and to reduce the risk of the gas jet getting blocked, it is best to expel all gas from the hose assembly. With the burner still lit, turn the valve on the gas cylinder in a clockwise direction to the off position. Allow the flame to extinguish and then turn the regulator control valve to the off position. EMPTY GAS CYLINDER If the Gas cylinder is empty, the burner will not light. If the burner does not light, firstly check the gas cylinder and replace with a full cylinder. If after this the burner lights you can assume that your problem was an empty gas cylinder.

12 12 USING THE COOKING POT WARNING Never use pots or other vessels that are not designed for use on this appliance. All cooking vessels must fit inside the top ring of the base (1). Pot must not over hang the base ring (1) 1 1 This Crab Cooker Set has been designed to boil water, never use cooking oil. Never fill the pot to over the maximum fill line. Never use the pot on the burner when it has no water in it. The pot will burn out. Water must be filled to the minimum fill line. Do not leave the appliance unattended at any time while it is in operation. Be careful when placing the food into the pot when the appliance is in operation. Carefully watch for splashing or overflow of the hot water during emersion of the food. Always use protective heat resistant gloves when handling the pot and pot lid. The pot and lid will be hot during use and also for some time once the burner is turned off. Use the triangle lifter as well as protective heat resistant gloves as extra protection when removing the inner basket from the pot. The triangle lifter is to lift the inner basket by the swivelling metal handle. Always make sure that children and pets are well clear of the pot and boiling water at all times. Extreme care should be used when handling the pot and operating the appliance. If you have finished cooking with the pot, do not reduce the flame to keep the water warm for later use. Turn off the burner and allow the pot and water to cool and then disposing of water.

13 F. CARE AND MAINTENANCE 13 Warm soapy water is recommended to be used to wipe down the surfaces of the appliance. CAUTION You must let the appliance cool down before you clean it. NEVER douse the crab cooker with water when the surfaces are hot. DO NOT submerge in water. DO NOT allow water to enter into the burner outlets or aeration holes 1. CARE OF BURNERS Ensure that there are no signs of blockage (debris, insects) in either the burner portholes, the primary air inlet, or the neck of the burner. Use compressed air or a pipe cleaner wire to clear obstructions. A wire brush can be used to remove corrosion from the burner surfaces. On the burner outlet is an adjustable air shutter. This has been factory set and should not need to be adjusted. Adjusting this allows more or less air to enter the burner which will adjust the flame composition. 2. STORAGE Store your Crab Cooker Set in a cool, dry place. Cover the burner with aluminium foil in order to prevent insects or other debris from collecting in burner holes. The gas cylinder should be disconnected from the Crab Cooker Set and stored outdoors. When using the Crab Cooker Set after extended periods of storage, please follow all of the care and maintenance instructions. Cylinders must be stored outdoors in a well ventilated area out of the reach of children. Any indoor storage shall comply with Section 2 Minor storage and usage of AS/NZS After use, the gas control valve, hose and regulator assembly must be removed from the Crab Cooker Set and stored safely until the next use. WARNING: Ensure any covers are removed prior to operating the Crab Cooker Set. It is recomended that the Crab Cooker Set be serviced by an authorised gas technician every 24 months.

14 14 Diagrammatical Representation of "OUTDOOR AREAS" THIS APPLIANCE SHALL ONLY BE USED IN AN ABOVE GROUND OPEN-AIR SITUATION WITH NATURAL VENTILATION, WITHOUT STAGNANT AREAS, WHERE GAS LEAKAGE AND PRODUCTS OF COMBUSTION ARE RAPIDLY DISPERSED BY WIND AND NATURAL CONVECTION. THIS CRAB COOKER SET IS NOT DESIGNED FOR MARINE USE. ANY ENCLOSURE IN WHICH THE APPLIANCE IS USED SHALL COMPLY WITH ONE OF THE FOLLOWING: An enclosure with walls on all sides, but at least one permanent opening at ground level and no overhead cover (refer to example 1). Figure 1 Outdoor Area, Example 1 Within a partial enclosure that includes an overhead cover and more than two walls (Refer to example 2). Figure 2 Outdoor Area, Example 2

15 Within a partial enclosure that includes an overhead cover and more than two walls, the following shall apply: a) at least 25% of the total wall area is completely open, and b) at least 30% of the remaining wall area is open and unrestricted (Refer to examples 3, 4 and 5). 15 Both ends open Figure 3 Outdoor Area, Example 3 Figure 4 Outdoor Area, Example 4 Open side at least 25% of the total wall area 30% or more in total of the remaining wall area is open and unrestricted Figure 5 Outdoor Area, Example 5 Open side at least 25% of the total wall area In the case of balconies, at least 20% of the total side, back and front wall areas shall remain open and unrestricted.

16 16 REPLACEMENT PARTS Note: Do not modify this appliance, use only original parts. This will protect your warranty coverage for parts replaced under warranty. AFTER SALES SERVICE For enquiries regarding service or spare parts, please call Technical Specifications Propane Model AGA Approval Injector(mm) Pressure(kPa) Inp/Burn(MJ/h) Total(MJ/h) HK0516 AGA 8004 G Minimum clearance of Crab Cooker Set to combustible surfaces is 100cm at the sides, 100cm from back and 100cm above the Crab Cooker Set. Made in China This Crab Cooker is manufactured by: Huzhou Metalwork Co Ltd Industrial Park, Donglin Zhejiang Province China Made in China Imported by: Hark Enterprises Pty Ltd Unit 11, Norcal Rd Nunawading VIC 3131 Local Call: (Excl. mobiles) sales@hark.com.au Web: After Sales Support Telephone: sales@hark.com.au YEAR WARRANTY

17 Hark Enterprises Pty Ltd Unit 11, Norcal Rd, Nunawading, VIC 3131 T: E: W: