F PS L. Ferrules & Sleeves for High, Medium, and Low-Pressure Hose Systems
|
|
|
- Sherman Gilmore
- 5 years ago
- Views:
Transcription
1 G 33
2 G Ferrules & Sleeves for High, Medium, and Low-Pressure Hose Systems CampbellCrimpnology... the only comprehensive package of crimping products in the industry! CampbellCrimpnology Crimpnology refers to all of the technology involved in crimping: the integrated design of every fitting, coupling, ferrule, and sleeve; the crimp procedures; crimp specifications; and crimp training & support. HOSE FERRULE FITTING INTERLOCK The turn-in of the ferrule interlocks with the machined groove on the fitting or coupling, providing a mechanical attachment for exceptional hose retention Features and Benefits Crimpnology offers the following 7 Essentials for crimping safe, repeatable, performance-rated hose systems: Interlock groove on all fittings and couplings is compatible with the turn-in end of the ferrule to ensure a 360 ferrule-to-fitting interlock. Serrations specifically designed for crimping provide maximum hose retention without potential tube failure. Shank length and ferrule/sleeve length are matched to maximize retention and to avoid hose tube or cover damage. Detailed assembly procedures are provided, including information to ensure use of compatible components. Detailed crimping procedures (right) ensure appropriate crimp specification is derived for each hose and fitting combination. On-site crimping training by a Hose System Specialist, including a CD/video for review (left), is offered by Campbell to assist distributor personnel. A daytime, toll-free hotline is manned by a Campbell Hose System Specialist to assist in all aspects of training. 34 FERRULE & SLEEVE PART NUMBERING PRODUCT F = Ferrule S = Sleeve MATERIAL PS = SS = Stainless Steel F PS L NOMINAL HOSE SIZE 150 = 1-1/2 200 = 2 FERRULE/SLEEVE I.D. 216 = 2-16/ = 3-40/64 NON-STANDARD LENGTH L = Long S = Short Performance-Rated All Campbell pressure ratings are established and verified by hydrostatic testing to a 4X safety factor where applicable (see page 1 for pressure rating information). Test data and information regarding various combinations of hoses and fittings are available upon request. Note: Campbell sleeves may be used on non-campbell fittings. We cannot provide crimp specifications or recommend working pressures for non-campbell parts. The pressure ratings in this catalog are valid only when using all Campbell parts. For safety and quality assurance, always proof test hose assembly according to NAHAD guidelines.
3 G FERRULES FERRULES for use with products shown below only: Crimpnology Nipples (page 11) Campbell Cobra Parts C & E (page 15) hose ferrule part list 3/4 1-20/64 FPS /4 1-24/64 FPS /4 1-28/64 FPS /4 1-32/64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /4 1-52/64 FPS /4 1-56/64 FPS /4 1-60/64 FPS /2 1-60/64 FPS /2 2 FPS /2 2-4/64 FPS /2 2-8/64 FPS /2 2-12/64 FPS /2 2-16/64 FPS /2 2-20/64 FPS /2 2-24/64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /2 3-8/64 FPS /2 3-12/64 FPS /2 3-16/64 FPS /2 3-20/64 FPS /2 3-28/64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS FPS /64 FPS /64 FPS ChemJoint Couplings & Male Stems (page 31) /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS Stainless 1/2 1 FSS /2 1-4/64 FSS /2 1-8/64 FSS /4 1-16/64 FSS /4 1-20/64 FSS /4 1-24/64 FSS /4 1-28/64 FSS /4 1-32/64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /4 1-52/64 FSS /4 1-56/64 FSS /4 1-60/64 FSS /2 1-60/64 FSS /2 2 FSS /2 2-4/64 FSS /2 2-8/64 FSS /2 2-12/64 FSS /2 2-16/64 FSS /2 2-20/64 FSS /2 2-24/64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /2 3-8/64 FSS /2 3-12/64 FSS /2 3-16/64 FSS /2 3-20/64 FSS /2 3-28/64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS /64 FSS FSS /64 FSS continued on next page 35
4 PHONE FAX FERRULES for use with products shown below only: WARNING: NOT FOR USE WITH STEAM LIGHT DUTY FERRULES Long Crimpnology Nipples (page 11) Viton Seal Ground Joints and Male Stems (page 19) 36 hose ferrule part list 1/2 1 FPS050100S /2 1-4/64 FPS050104S /2 1-8/64 FPS050108S /4 1-16/64 FPS /4 1-20/64 FPS /4 1-24/64 FPS /4 1-28/64 FPS /4 1-32/64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /64 FPS /4 1-52/64 FPS125152L /4 1-56/64 FPS125156L /4 1-60/64 FPS125160L /2 1-60/64 FPS150160L /2 2 FPS150200L /2 2-4/64 FPS150204L /2 2-8/64 FPS150208L /2 2-12/64 FPS150212L /2 2-16/64 FPS150216L /2 2-20/64 FPS150220L /2 2-24/64 FPS150224L /64 FPS200232L /64 FPS200236L /64 FPS200240L /64 FPS200244L /64 FPS200248L /64 FPS200252L /64 FPS200256L /64 FPS200260L /2 3-8/64 FPS250308L /2 3-12/64 FPS250312L /2 3-16/64 FPS250316L /2 3-20/64 FPS250320L /2 3-28/64 FPS250328L /64 FPS300336L /64 FPS300340L /64 FPS300344L /64 FPS300348L /64 FPS300352L /64 FPS300356L /64 FPS300360L FPS300400L /64 FPS400440L /64 FPS400444L /64 FPS400448L /64 FPS400452L /64 FPS400456L /64 FPS400460L FPS400500L /64 FPS400504L FERRULES (light duty) for use with couplings shown below only: All Campbell Universals (page 25) UniversaLock (page 25) Single-Lock (Bowes) (page 26) hose ferrule part list 1/2 58/64 FLPS /2 60/64 FLPS /4 1-8/64 FLPS /4 1-10/64 FLPS /4 1-12/64 FLPS /4 1-14/64 FLPS /4 1-16/64 FLPS /4 1-18/64 FLPS /64 FLPS /64 FLPS /64 FLPS /64 FLPS /64 FLPS Stainless 1/2 58/64 FLSS /4 1-8/64 FLSS /4 1-12/64 FLSS /4 1-14/64 FLSS /4 1-16/64 FLSS /4 1-18/64 FLSS /64 FLSS /64 FLSS /64 FLSS /64 FLSS /64 FLSS Double-Lock (Thor) (page 26)
5 G SLEEVES SLEEVES for use with products shown below only: Campbell Cobra Parts C & E (page 15) Standard Cobra Parts C & E (page 57) hose sleeve part list 3/4 1-8/64 SPS /4 1-24/64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /4 1-56/64 SPS /4 2 SPS /2 1-48/64 SPS /2 1-52/64 SPS /2 1-56/64 SPS /2 1-60/64 SPS /2 2 SPS /2 2-4/64 SPS /2 2-8/64 SPS /2 2-12/64 SPS /2 2-16/64 SPS /2 2-20/64 SPS /2 2-24/64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS SPS /64 SSS /2 3 SPS /2 3-8/64 SPS /2 3-16/64 SPS /2 3-24/64 SPS /2 3-32/64 SPS /2 3-34/64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS SPS /64 SPS /64 SPS Stainless 3/4 1-8/64 SSS /4 1-16/64 SSS /4 1-24/64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /4 1-56/64 SSS /4 2 SSS continued on next page 37
6 PHONE FAX Stainless Sleeves (continued from previous page) 1-1/2 1-52/64 SSS /2 1-56/64 SSS /2 1-60/64 SSS /2 2 SSS /2 2-4/64 SSS /2 2-8/64 SSS /2 2-12/64 SSS /2 2-16/64 SSS /2 2-20/64 SSS /2 2-24/64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS SSS /64 SSS /2 3 SSS /2 3-8/64 SSS /2 3-16/64 SSS /2 3-24/64 SSS /2 3-32/64 SSS /2 3-34/64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS /64 SSS SSS /64 SSS Aluminum /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL /64 SAL SLEEVES for use with products shown below only: Combination Nipples (page 5) hose sleeve part list 1/2 1 SPS050100S /4 1-8/64 SPS075108S /4 1-20/64 SPS075120S /4 1-24/64 SPS075124S /64 SPS100128S /64 SPS100132S /64 SPS100136S /64 SPS100140S /64 SPS100144S /64 SPS100148S /4 1-40/64 SPS125140S /4 1-48/64 SPS125148S /4 1-52/64 SPS125152S /4 1-56/64 SPS125156S /2 1-60/64 SPS150160S /2 2 SPS150200S /2 2-4/64 SPS150204S /2 2-8/64 SPS150208S /2 2-12/64 SPS150212S /2 2-16/64 SPS150216S /2 2-20/64 SPS150220S /2 2-24/64 SPS150224S 4.94 Suction Hose Couplings (page 7) 38
7 G 2 2-8/64 SPS200208S /64 SPS200216S /64 SPS200224S /64 SPS200228S /64 SPS200232S /64 SPS200236S /64 SPS200240S /64 SPS200244S /64 SPS200248S /64 SPS200252S /64 SPS200256S /64 SPS200260S SPS200300S /2 2-48/64 SPS250248S /2 2-56/64 SPS250256S /2 3 SPS250300S /2 3-8/64 SPS250308S /2 3-16/64 SPS250316S /2 3-24/64 SPS250324S /2 3-32/64 SPS250332S /64 SPS300308S /64 SPS300316S /64 SPS300324S /64 SPS300328S /64 SPS300332S /64 SPS300336S /64 SPS300340S /64 SPS300344S /64 SPS300348S /64 SPS300352S /64 SPS300356S /64 SPS300360S SPS300400S /64 SPS400416S /64 SPS400424S /64 SPS400432S /64 SPS400436S /64 SPS400440S /64 SPS400444S /64 SPS400448S /64 SPS400452S /64 SPS400456S /64 SPS400460S SPS400500S /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS SPS /64 SPS /64 SPS /64 SPS /64 SPS /64 SPS SPS /64 SPS /64 SPS Stainless 1/2 1 SSS050100S /4 1-8/64 SSS075108S /4 1-16/64 SSS075116S /4 1-20/64 SSS075120S /4 1-24/64 SSS075124S /64 SSS100128S /64 SSS100132S /64 SSS100136S /64 SSS100140S /64 SSS100144S /64 SSS100148S /4 1-40/64 SSS125140S /4 1-48/64 SSS125148S /4 1-52/64 SSS125152S /4 1-56/64 SSS125156S /2 1-60/64 SSS150150S /2 2 SSS150200S /2 2-4/64 SSS150204S /2 2-8/64 SSS150208S /2 2-12/64 SSS150212S /2 2-16/64 SSS150216S /2 2-20/64 SSS150220S /2 2-24/64 SSS150224S /64 SSS200208S /64 SSS200216S /64 SSS200224S /64 SSS200228S /64 SSS200232S /64 SSS200236S /64 SSS200240S /64 SSS200244S /64 SSS200248S /64 SSS200252S /64 SSS200256S /64 SSS200260S SSS200300S /2 3-8/64 SSS250308S /2 3-16/64 SSS250316S /2 3-24/64 SSS250324S /2 3-32/64 SSS250332S /64 SSS300308S /64 SSS300316S /64 SSS300324S /64 SSS300328S /64 SSS300332S /64 SSS300336S /64 SSS300340S /64 SSS300344S /64 SSS300348S /64 SSS300352S /64 SSS300356S /64 SSS300360S SSS300400S /64 SSS400416S /64 SSS400424S /64 SSS400432S /64 SSS400436S /64 SSS400440S /64 SSS400444S /64 SSS400448S /64 SSS400452S /64 SSS400456S /64 SSS400460S SSS400500S
8 Glossary of CampbellCrimpnology Terms Crimp chart: a chart designed to assist in determining the crimp spec, which includes allowances for serration style, fitting and ferrule/sleeve O.D. and design. Crimp spec (or specification): the outside diameter of the ferrule/sleeve after assembling and crimping. Cut-slots: notches cut into the turned-in end of a ferrule that allows the interlock portion to crimp straight down into the fitting interlock without opening outward during crimping. Ferrule: a tube-like product with one end turned in so as to affect an interlock into a groove on a mating fitting or coupling. Ferrule length: the overall length of the ferrule as measured from the turn-in end to the open end. Ferrule/Sleeve I.D.: the inside bowl diameter of the ferrule; the inside diameter of the sleeve; the inside diameter of either where the hose is placed Gauge: the thickness of the ferrule/sleeve material. Interlock groove: a groove designed into the fitting/coupling to accept the turn-in end of the ferrule. Shank length: the hose barb area measured from the end of the fitting to the interlock groove. Sleeve: a tube-like product with no interlock provisions. Sleeve length: the overall length of the sleeve from end to end. Turn-in: the interlocking end of the ferrule. 40
Couplings for High-Pressure Air and Steam Hose
D 25 D Couplings for High-Pressure Air and Steam Hose CampbellCrimpnology offers hose assembly systems for your high-pressure steam and air applications Smooth End Detail Interlock Groove VITON SEAL GROUND
Fittings & Accessories for Multi-Purpose and Utility Hose
A 3 A Fittings & Accessories for Multi-Purpose and Utility Hose CampbellCrimpnology offers crimping flexibility for your multi-purpose hose applications. COMBINATION NIPPLES AND MENDERS Features & Benefits
Couplings for Gates Hoses 7 Combination Nipple
Supersedes 1 Long Shank Couplings for Gates Hoses 7 Combination Nipple Description: Cast brass, serrated shank, set has hex male and hex swivel female couplings, with a washer seal. Threads are GHT or
Couplings & Safety Couplings for Air and Water Hose
23 Couplings & Safety Couplings for Air and Water Hose CampbellCrimpnology offers hose assembly systems for all your air applications: Nitrogen Kills! Reduce the risk of disaster! Use UniversaLocks, Single-Locks
PRODUCT TRAINING MANUAL
PRODUCT TRAINING MANUAL for BRASS PRODUCTS designed for $5.95 TABLE OF CONTENTS Fitting Identification Page Course Outline...........................1 Glossary..............................2-5 Safety Information........................6
2018 Specifications & Pricing Guide. Check our website: for updates and new product offerings.
2018 2018 & Pricing Guide December 20, 2017 Dear Valued Customer: The attached sales brochure includes specifications and pricing for offered by Company. For those of you who have placed orders in the
Dual-Lock Quick Acting Couplings
Thor Dual Lock Dual-Lock Quick cting Couplings Dual-Lock couplings allow full air for general purpose air and pneumatic impact tools. handling requiring high Service: The recommended working pressure for
Hose Fitting Selection Chart
LOW/MEIUM Hose Fitting Selection hart PERMNENT REUSLE SERIES SERIES N SH SIZE RNGE* Zinc Plated Steel 903 3630 (-03 to -12), 3R30, 3130, 37L, 3800, 3840, 3580, 3440 (-04 to -08), 30T (-04 to-08) 90H 3630
Dual-Lock. dixonvalve.com Customer Service:
UFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTU Dual-Lock dixonvalve.com Customer Service: 877.963.4966 Dual-Lock Quick cting Couplings Dual-Lock couplings allow
Dual-Lock. dixonvalve.com Customer Service:
UFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTU Dual-Lock dixonvalve.com Customer Service: 877.963.4966 Quick cting Couplings Dual-Lock couplings allow full air flow
SH, MP, HP, EZ-SH, EZ-MP, EZ-HP Series Design Features & Benefits COXREELS. SH, MP, HP, EZ-SH, EZ-MP, & EZ-HP Series Design Features
COXREELS SH, MP, HP, EZ-SH, EZ-MP, & EZ-HP Series Design Features The following are features and benefits of our Standard Heavy Duty and EZ Coil TM Series Reel 1. GUIDE ARM: The Coxreels guide arm is stamped
Dual-Lock. P-Series. dixonvalve.com Customer Service:
UFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCTURING QULITY SERVICE MNUFCT Dual-Lock P-Series dixonvalve.com Customer Service: 877.963.4966 pplication: full flow coupling used on utility air,
get connected with Bradford fittings & valves Bradford Company, Inc
get connected with Bradford fittings & valves Bradford Company, Inc. 800.789.1718 www.bradfordfittings.com Bradford your top quality, sanitary stainless steel fittings & valves manufacturer serving you
1 Specifications. 2 1¼" through 4" Standard and Long Holedall Swaged Couplings
100 Ton Ram Table of Contents Holedall Concept 1 Specifications 2 1¼" through 4" Standard and Long Holedall Swaged Couplings 3 1¼" through 4" Standard and Long Flanged Holedall Swaged Couplings using Collar
4567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123
HOW TO USE THE COUPLING SECTION
HOW TO USE THE COUPLING SECTION NOTE: Because the hose/coupling interface is critical to hose assembly performance, always follow the specific instructions of hose and coupling manufacturers regarding
Metal & Teflon Lined Hose
May 2001 Metal & Teflon Lined Hose Components & Controls, Inc. 493 Washington Avenue Carlstadt, NJ 07072 201-438-9190 212-564-5541 Fax: 201-438-3356 www.componentsandcontrols.com Components & Controls,
What sets Midwest Industrial Packaging apart?
The Midwest Industrial Packaging Advantage MIP has helped a successful network of industrial distributor partners compete in today s packaging marketplace. At every stage, our dedicated team is 100% committed
Unshielded Fluid Hose Kit
Instructions Unshielded Fluid Hose Kit 308688C Kit Part No. 238995 Kit for converting the PRO 5500wb Spray Gun and the PRO Auto Xs wb Spray Gun to allow the use of a bare PTFE(unshielded) fluid hose. Order
Worm Gear Clamps. Spiral Double-Bolt Clamps. The Ultimate in Clamping for Your Vacuum Hose. With Plated Carbon Steel Deep-Slotted Screw
Worm Gear Clamps 5/16" Hex Stainless Steel Band Can Be Used on Any Hose Available with Stainless Steel or Plated Carbon Screws With Stainless Steel Screw FITS HOSE O.D. FROM TO SSHC-6* 7/16" 25/32" SSHC-8
Dixon Coupling Procedures. dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU Dixon Coupling Procedures dixonvalve.com Customer Service: 877.963.4966 COUPLING PROCEDURES INDEX Selection/Preparation
Our many custom services include etching part numbers, specifications, and tracking of parts.
Catalog ABOUT US LGV Coupling, Inc is a family oriented business with 30 years of experience in the coupling manufacturing industry. We specialize in the production of fittings, ferrules and sleeves that
Section Ton Ram Operating Instructions for 1-1/4" through 4" Standard & Long Holedall Swaged Couplings
100 Ton Ram Operating Instructions for 1-1/4" through 4" Standard & Long Holedall Swaged Couplings Dixon Valve & Coupling Company 800 High Street Chestertown, MD 21620 ph: 800 355 1991 fax: 800 283 4966
PARTS LIST EXTRACTOR ACCESSORIES
PARTS LIST EXTRACTOR ACCESSORIES 3 - JET WAND - 4097101 101 4097961 HANDLE ASSEMBLY - INCLUDES: 1 102 9121210 1/4-20 X 5/8 HEX BOLT 2 103 ---------- HANDLE CLAMP 1 104 9120920 1/4-20 HEX NUT 2 105 9120777
SERVICE PARTS LIST AND ASSEMBLY INSTRUCTIONS
R Transport Air Conditioning FlexCLIK 58-64105-03 #12 [16MM], 35 Bar, SAE J2064 Type E FlexCLIK 58-64105-02 #10 [13MM], 35 Bar, SAE J2064 Type E FlexCLIK 58-64105-01 #8 [10MM], 35 Bar, SAE J2064 Type E
300 ft. 5/8 Hose wagon
300 ft. 5/8 Hose wagon Model 95956 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. (Garden hose is not included).
The unique fitting design provides a swivel at both ends of the hose assembly.
The Tramec Sloan Live Swivel system of heavy duty air brake hose assemblies meet and exceed all requirements of FMVSS 106 and SAE J1402. Each end fitting is labeled with certification to the federal standards.
Swagelok Thermoplastic Hose Hand Swager User s Manual
Swagelok Thermoplastic Hose Hand Swager User s Manual Thermoplastic Hose Hand Swager User s Manual Contents Hand Swager Components....................... 2 Setup Swager.......................................
Integrated Process Solutions
Integrated Process Solutions w w w. m k s i n s t. c o m Series 31 ISO-KF fittings Sizes to 0 ( to 4'') Series 31 is a line of ISO-KF standard vacuum components. The ISO-KF system refers to the family
Geotech Portable Bladder Pumps Installation and Operation Manual
Geotech Portable Bladder Pumps Installation and Operation Manual Rev. 6/25/2010 Part # 11150272 Table of Contents SYSTEM DESCRIPTION... P. 02 FUNCTION AND THEORY...P. 02 SYSTEM COMPONENTS...P. 02 SYSTEM
PRODUCT SPECIFICATION
Product Family Product Number Ages Rainbow Swing GS-RS3100 2 to 12 years 9 0 / 2.75 m Capacity 4 Size Use Zone W: 11 9 / 3.57 m H: 9 0 / 2.75 m L: 23 7 / 7.19 m W: 7 9 / 2.35 m Fall Height Shipping Weight
Aerospace. Light Weight and Flexible Qualified to Industry Standards. Fluid Conveyance
Aerospace Fluid Conveyance Aeroquip Brand Rubber Hose, & Assemblies for Aerospace Applications Light and Flexible Qualified to Industry Standards 303, 302A Medium Pressure Hose,, and Assemblies Construction:
Quality Consistency Reliability.
WAND CATALOG Quality Consistency Reliability. Each and every tool that EDIC sells is rigorously tested with high pressure solution at EDIC s factory in Los Angeles before it is approved for shipment. EDIC
For draining expansion tanks, other liquid storage vessels.
Plumbing Specialties 26-100 & 26-300 SERIES COMPRESSION GAUGE COCKS For draining expansion tanks, other liquid storage vessels. 26-100: rated up to 125 psig 26-300: soft metal seat/stuffing box rated up
Thread Size Hose Size A
Permanent and Reusable ose Fittings 90 Series Field ttachable 20190 Male Taper Pipe Rigid Number C NPTF ose llow. ex 20190-2-4 1/8 27-4 1.33 7/8 9/16 20190-4-4 1/4 18-4 1.58 1-1/16 9/16 20190-4-5 1/4 1/8-5
PRO-LITE 350 HOSE USE WITH SWIVEL-SEAL, AUTO-FIT 0R AUTO-CRIMP HOSE ENDS
PRO-LITE 350 HOSE USE WITH SWIVEL-SEAL, AUTO-FIT 0R AUTO-CRIMP HOSE ENDS EARL S PRO LITE 350 HOSE IS ONE OF THE LIGHTEST AND MOST DURABLE HOSES AVAILABLE ON THE MARKET TODAY! Serious racers and street
LOUISIANA BURNER / The Millers and the staff of Louisiana Burner
Louisiana Burner 634 Main Street Pineville, LA 71360 318 318--473 473--2868 Fax 318 318--473 473--2807 www.louisianaburners.com catalog2016 LOUISIANA BURNER Dear Customers, Last year, the Miller Family
SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP
SUBMITTAL PACKAGE FLEXIBLE SPRINKLER DROP BRAIDED CONNECTIONS...pg 2-6 UNBRAIDED CONNECTIONS...pg 7-9 INSTALLATION...pg 10 ACCESSORIES...pg 11 6/26/2018 BRAIDED CONNECTIONS ARGCO Flexible Sprinkler Drops
Oilfield Products
Oilfield Products 2 Table of Contents Holedall... 3-7 external swage high pressure couplings... 3 grade D rotary hose couplings... 3 350 ton ram coupling machine... 4 15 ton ram coupling machine... 4 25
Band Clamp. Crowder Supply Co., Inc Roslyn St., Commerce City, CO Toll Free:
www.crowdersupply.com Toll Free: 888-883-544 Crowder Supply Co., Inc. 8495 Roslyn St., Commerce City, CO 800 Toll Free: 888-883-544 www.crowdersupply.com Band Clamp www.crowdersupply.com Toll Free: 888-883-544
Hose Clamps & Fittings
All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw
T&S BRASS AND BRONZE WORKS, INC.
Saddleback Cove / P.O. Box 088 Travelers Rest, SC 9690 BL-570-08 Travelers Rest, SC: 800-76-03 Simi Valley, CA: 800-3-050 Fax: 86-83-358 www.tsbrass.com 7 /" This Space for Architect/Engineer Approval
EJ Beverage. An Eldon James Company. Quality Tubing and Connectors
EJ Beverage An Eldon James Company Quality Tubing and Connectors 3 Food and Beverage Applications EJ Beverage offers a full line of tubing and connectors for a wide variety of food and beverage applications.
Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
Eaton Winner Hose and Fittings. North America
Eaton Winner Hose and Fittings North America Table of contents Contents Safety and Ordering Information 3 Warranty Information 3 Hose EC115 EN857 1SC Braided Hose 5 EC215 EN857 2SC Braided Hose 5 EC118
Gates Hose Cutter Model 6-32 For six-wire spiral and two-wire braid hose through 2" I.D. Product Number: Clean Easy Cuts Safe Operation
Standard Hydraulic Hose Specialized Mining Couplings, Adapters and Accessories Specialized Mining Hose Product Information Gates Power Cutter 208 Product : 7480-6609 Effortless Straight Cuts Every Time
Installation Instructions for Wall Mount, Deck Mount and Pre-rinse Faucets
Installation Instructions for Wall Mount, Deck Mount and Pre-rinse Faucets SAVE FOR END USER ELKAY 2222 CAMDEN COURT OAK BROOK, IL 60523 USA WALL MOUNT ASSEMBLY General Instructions Turn off the water
FBO-10 and FBO-14. Fuel Filter/Water Separator For High-Flow Applications. Product Features. Contact Information
FBO-0 and FBO-4 Fuel Filter/Water Separator For High-Flow Applications These versatile housings have three filter options to meet various requirements: a fuel filter/water separator, a silicone treated
Flow Splitter. Installation Instructions
protecol Flow Splitter Installation Instructions Introduction The ProteCol Flow Splitter is designed to split conventional LC flow rates (250 µl/min to 8 ml/min) to achieve capillary LC flow rates (100
Section B 5 Parts. 1. Introduction. Using the Illustrated Parts List. Parts B 5-1
Parts B - Section B Parts. Introduction To order parts, call the Nordson Customer Service Center or your local Nordson representative. Use the parts list, and the accompanying illustration, to describe
COMPRESSED AIR 185AA/AH/AK 175AA/AH/AK 155AA/AK 140AK 180AA 186AA 191AK 132AE 195AT. Express. Claw Couplings. Claw Couplings USA. Claw Couplings AUS
COMPRESSED AIR 195AT 191AK 180AA 185AA/AH/AK 186AA 175AA/AH/AK 155AA/AK 140AK 132AE Express Claw EU Claw USA Claw AUS Geka Ground Joint Seal Combination s precrimped ferrule HOT AIR 952AA 902AA 902AE 902LE
Solar Power Shade INSTRUCTION MANUAL
INSTRUCTION MANUAL 20 June 2006, Revision Initial Release 26 September 2006, version 2 Powerfilm, Inc. 2337 230th Street Ames, IA 50014 (515) 292-7606 Web Site: www.powerfilmsolar.com Table of Contents
Section 17. Flanges & Waveguide. Introduction
Section Flanges & Waveguide Introduction MDL has a complete line of precision waveguide and flanges. Our waveguide meets the requirements of MIL-W-85. Where complex waveguide network design require small,
Hose Solutions. Hydraulic Crimping Systems and Industrial Hose & Fittings. USA: 866.LAWSON4U ( ) Canada: lawsonproducts.
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Hose Solutions Hydraulic Crimping Systems and Industrial Hose & Fittings E1329 V3 (2/17) NOT JUST MANAGED INVENTORY LAWSON MANAGED
Form No.: LITPLUMBPAK1/2007AD 2005 Plumb Pak Printed in the U.S.A.
Catalog Addendum Table of Contents CONTENTS Table of Contents Brass Drainage...2 Plastic Drainage...3 Strainers...5 Bath Drains...6 Water Supplies...7 Sink & Faucet...9 Hose & Fittings...8 Bathroom Accessories...9
100 Ton Ram 15 Ton Ram 350 Ton Ram 25 Ton Ram 50 Ton Ram Holedall Fittings Features:
Holedall Coupling achines Rams, are powerful finely engineered machines designed specifically to externally swage and internally expand Holedall couplings by hydraulic pressure securely attaching Holedall
Custom brushes can be made to your specifications. Call for details!
Schaefer Tube es Section 10 Tube br Custom brushes can be made to your specifications. Call for details! Twisted Wire es The small symbols represent a cross section of a twisted brush. (2 wire) bristles
Ball Valve Manual Balance Hose Kits - Submittal
Ball Valve Manual Balance Hose Kits - Submittal Hose Kit Size *MFR 1/2" 5 3/4" 11 1" 20 1-1/4" 30 **1-1/2" 44 **2" 78 Qty. *MFR (Max. Flow Recommendations) calculated at 8 fps. **1-1/2 and 2 hose kits
Synflex Assembly Equipment and Accessories
Synflex Assembly Equipment and Accessories H1 Synflex Swaging Machines SST and Mark IX Designed to Attach Synflex Permanent Fittings to Synflex Hose Synflex swaging equipment produces smooth, uniform fitting
Synflex. Mini Catalog
Synflex Mini Catalog Table of Contents Hose Selection Chart Core 5 Hoses (Application/Product) 2 3R30, 3130, 3580, 30CT, 3R80 Core 5 Hoses (Product) 2 3R30, 3130, 3580, 30CT, 3R80 Hose 3R30 Low Pressure
LSC19 Lighting Cable Assemblies and Connectors
PowerFLEX Cable Assemblies PowerPARTS Wiring Devices ISO 9001:2008 LSC19 Lighting Cable Assemblies and Connectors PowerFLEX and PowerPARTS Introducing a new generation of Lex Products 19 pin, 6-circuit
Bruna Epdm Neopr Sizes: ½, ¾, 1, 1 ¼, 1 ½, 2, 2 ½, 3, 4, 5, 6 Full Teflon Viton CAM ARMS - PINS RINGS FOR CAMLOCKS
Bestline Mining Supplies Ltd, are appointed distributors of superior AIRLINE COUPLINGS HOSE CLAMPS HOSE AND PIPE FITTINGS. We work closely with our manufacturers in South Africa to bring you the best quality
Meat Slicer INSTRUCTION MANUAL CAUTION! ONE YEAR LIMITED WARRANTY
ONE YEAR LIMITED WARRANTY INSTRUCTION MANUAL The original registered owner of this product should contact SKYFOOD EQUIPMENT LLC at 305-868-16 for any warranty problems or service. SKYFOOD EQUIPMENT LLC
Steel Flareless Ermeto Connectors
Ermeto onnectors PPITIO T Typical pplication: Hydraulic, instrumentation and chemical processing. Highly recommended for high pressure and high vibration applications. Tube O.. 1/8 3/16 1/4 5/16 3/8 1/2
I N ST R UC T I ON MODELS 1612E, 1712E & 1712RE SLICERS. FORM Rev. B (10-97) 1712RE 701 S. RIDGE AVENUE TROY, OHIO 45374
I N ST R UC 1712E T I ON MODELS 1612E, 1712E & 1712RE SLICERS S ML-104546 ML-104547 ML-104548 1612E 1712E 1712RE 701 S. RIDGE AVENUE TROY, OHIO 45374 FORM 19238 Rev. B (10-97) TABLE OF CONTENTS GENERAL......................................................................
UNIVERSAL PARTS GLOBAL
STAINLESS HOSE CLAMPS WIDE Stainless Band (9/16 ) No spot welds Extra long take up Smooth edges Interlock construction which strengthens under tension to ensure maximum torque application Worm gear clamps
Assembly/Installation/Use Instructions:
IMPORTANT We highly recommend that our products be installed and serviced by professionals who are certified in the U.S. by NFI (National Fireplace Institute) or in Canada by WETT (Wood Energy Technical
Construction Products
PO W ER TR AC K IN TE RN AT I ON AL,I NC. Construction Products Fabric & Steel Reinforced Concrete Pumping Hose 1-800-365-1577 THREE CONVENIENT LOCATIONS NATIONWIDE 4625 Campbells Run Rd. Pittsburgh, PA
34070 Sec13 SpecialtyV1 6/21/03 12:17 PM Page 339 SPECIALTY TOOLS 13
SPECIALTY TOOLS 13 TELESCOPIC MAGNETIC RETRIEVING TOOL Versatile telescoping handle and all-angle ball joint. 2375 16-3 4" to 26-3 4".40 Fed l Specs.: GGG-F-360B INSPECTION MIRRORS Versatile all-angle
ZI Haneboesch L-4562 Differdange LUXEMBOURG. 1/4 inch male NPT threaded Service temperature 135 C
Econoflow 59R Economical vacuum hose for non-autoclave applications Econoflow 59R is a vacuum hose designed for marine, transportation, recreational and other F.R.P. industries where cost cutting is a
FAX: HOSE COUPLINGS, FITTINGS, CLAMPS AND ACCESSORIES
-800-686-580 FAX: -877-94-467 Air Fittings and Accessories Air King Universal Couplings for Air Service Only (Also available in Brass, Stainless Steel) Hose End (Malleable Iron) (In.) Male NPT End (Malleable
THE ASSOCIATION FOR HOSEAND ACCESSORIES DISTRIBUTION EDITION 0218
THE ASSOCIATION FOR HOSEAND ACCESSORIES DISTRIBUTION EDITION 0218 Index Quality Assurance and 3A...3 Sanitary Fittings Brewery Hose Adapter Tri-Clamp x Long Hose Shank...6 Female Bevel Seat x Hose Shank
Sterilising Department. Buyers Guide.
2013 Sterilising Department Buyers Guide www.cheironhealthcare.com.au Index Index Product Index & Ordering Information 2 PAGE Instrument Cleaning Brushes 3-9 - Reusable Endoscope Cleaning Brushes 10 -
Safe - Spirals Protection for Hydraulic hoses
Safeplast NA Company, Ltd. Safe - Spirals Protection for Hydraulic hoses Safeplast hose protectors provide safe and economic protection of hydraulic and pneumatic hoses thereby reducing machine downtime
POP-UP OPTION USER HARDWARE MANUAL. EdgeTech 4 Little Brook Road West Wareham, MA _REV_B 8/29/2018
POP-UP OPTION USER HARDWARE MANUAL 0019850_REV_B 8/29/2018 EdgeTech 4 Little Brook Road West Wareham, MA 02576 Tel: (508) 291-0057 Fax: (508) 291-2491 www.edgetech.com ii The information, figures, and
YCU 750 TU Unitized Curtain Wall System
ASSEMBLY INSTRUCTIONS Assembly Manual 2009 YKK AP America Inc. is a subsidiary of YKK Corporation of America. TABLE OF CONTENTS Installation Notes........................................ Page ii PARTS
Set B. Set E. Set C. Set D. Set FR Ratchet. Set Burr-Ex. Long Reach Work Sets
Long Reach Work Sets Set B The Workhorse Popular standard set for holes, slots & edges. B holder supports all B blades, which can be inserted axially or perpendicular to the holder. Set E Heavy Duty B10
PHONE: FAX: TOLL-FREE:
PHONE: 905.677.9000 FAX: 905.677.4988 TOLL-FREE: 1.800.486.7863 www.tricanada.com We have the most responsive inside sales people in the business, backed up by strong technical support and same or next
Not The Typical Red & Blue
Not The Typical Red & Blue BAT is pleased to announce our new line of high quality, taper-swivel, -AN hose ends. Their distinctive titanium and black anodized finish offers a fresh new look over ordinary
Safe - Spirals Protection for Hydraulic hoses
Safeplast NA Company, Ltd. Safe - Spirals Protection for Hydraulic hoses Safeplast hose protectors provide safe and economic protection of hydraulic and pneumatic hoses thereby reducing machine downtime
Smallest Connector with Removable Contacts
1 Ultra-Miniature 8STA Size 01 Connectors Smallest Connector with Removable Contacts Ultra compact design and very lightweight connector dedicated to the harshest of motorsport environments. Innovative
ACCESSORIES OUR PARTS PUT YOU IN THE PASSING LANE. Yep, it's in here. AC1. velvac.com
OUR PARTS PUT YOU IN THE PASSING LANE ACCESSORIES Yep, it's in here. From wiper blades to emergency triangles, if you couldn't find what you were looking for in the other sections of our catalog, it's
Compact Spiral Hose. Unprecedented performance and flexibility
Compact Spiral Hose Unprecedented performance and flexibility Unprecedented 5000- and 6000-psi hose performance in a compact design. Compared with conventional spiral hose, Parker s Compact Spiral TM 787TC/797TC
TECHNICAL BROCHURE BPRIMELINE R1. Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA
TECHNICAL BROCHURE BPRIMELINE R1 Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA Prime Line A Full Range of Product Features Rugged Construction: Cast iron construction in close
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. One-piece connector body: Fastest assembly Field installable Anaerobic epoxy
HOSE ASSEMBLY CLEANLINESS
November 18, 2002 HOSE ASSEMBLY CLEANLINESS Preface Hydraulic system cleanliness is a term used to describe the level of solid and liquid contamination found in hydraulic systems. Contamination may be
WIDESPREAD LAVATORY MODELS WITH HI-ARC SPOUT
5951, 5961, 5981, 5983, 5993 SERIES MT122B INSTALLATION INSTRUCTIONS THESE INSTRUCTIONS MUST BE LEFT WITH HOMEOWNER WIDESPREAD LAVATORY MODELS WITH HI-ARC TRADITIONAL CROSS NOTE: Handle Inserts are not
Dry Ice Blasting Unit
Dry Ice Blasting Unit ASCO Nanojet complete (fully adjustable) part no. 900910 & 4064272 The ASCO Nanojet has been specially developed for the plastics industry. It has an integrated pellet grinder in
Spiral Duct. Contents. Introduction 1. Duct & Fitting Range 2. Duct Sizes 3. Fittings 5. Round Duct Connector 7. Installation 8
Contents Introduction 1 Duct & Fitting Range 2 Duct Sizes 3 Fittings 5 Round Duct Connector 7 Installation 8 Celmec International Pty Ltd ACN 005 850 546 Melbourne Tel: +61 3 8552 8200 Fax: +61 3 9555
ENGINE DRIVEN PUMPS PRODUCTS
ENGINE DRIVEN PUMPS PRODUCTS Red Lion Pumps With over 80 years of experience, Red Lion is the leader in water transfer pumps. Count on Red Lion to help you select the best well pump for your needs. What
Band Clamps and Accessories
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU Clamps and Accessories KORD INDUSTRIAL INC 866.874.5673 Table of Contents Clamps F and FO series...4 K series...5
Lift Handle. Spring Loaded Flush Lift. Locking Hasp. Swivel Hasp (Stamped) Safety Hasp (Stamped) w/fixed Plate PWB-3977S 5/16 2-3/16 3
Lift Handle Made of Stamped 316 Stainless Steel Part No. Height Width Length PWB-3977S 5/16 2-3/16 3 Spring Loaded Flush Lift Made of Stamped 316 Stainless Steel Part No Dia. High Spring PWB-3105SA 2 11/16
S T M P SELECTING THE PROPER HOSE ASSEMBLY. SIZE I.D., O.D., and length of the assembly
SELECTING THE PROPER HOSE ASSEMBLY In order to obtain the best service from any particular hose application, two important conditions must be fulfilled. 1) Select the right hose for the job. 2) Make sure
Click on Hose Codes to Be Linked to That Page. Pages 2-7 Pages 8-9 Pages Pages Pages Page 21. Page 20 Page 26
Click on Hose Codes to Be Linked to That Page Cam & Groove Couplings Kamlok Autolok Econolok Accessories Universal Claw Fittings Combination Steel Fittings Bolted Clamps Universal Interlocking Special
BowDown. MiniMuM Crossbar spread 24 (61CM) Steel Hook (2X) Buckle Strap (2X) Plastic Tube (2X) Plain Strap (2X) SHORT BLACK T-BOLT (2x) BOWDOWN (2x)
BowDown MiniMuM Crossbar spread 24 (61CM) Heavy Duty strap (2x) SHORT BLACK T-BOLT (2x) BOWDOWN (2x) Bow Stern Tie Down Buckle Strap (2X) Plastic Tube (2X) Plain Strap (2X) Steel Hook (2X) IMPORTANT WARNING
Eaton E-Z Clip System Assembly Instructions
Eaton E-Z Clip System Assembly Instructions E-Z Clip System Eaton s E-Z Clip System is designed for assembly with Eaton multi-refrigerant hose GH134. It s engineered hose and fitting connection exceeds
CUSTOM HOSE FABRICATION
INNOVATIVE SOLUTIONS IN CUSTOM HOSE FABRICATION AN ISO 9001:2000 COMPANY Designs to Meet Any Requirement At MFC, we work closely with our customers to develop the best products for their specific applications.
Installation Instructions for. Thrifty King CT Series Fountains
Installation Instructions for Thrifty King CT Series Fountains Congratulations, you have just purchased the finest watering fountain on the market. This unit is built to give you excellent service when
Instrumentation Pipe Fittings
Instrumentation Fittings 1 Instrumentation Fittings 1FM to Male dapter 1FP ap 1FPRU Reducer Union 1FPU Union 1HLN Hex Long Nipple 69 69 69 70 70 1HN Hex Nipple 1HRN Hex Reducing Nipple 1MPP Male Plug 1RFM
Instruction Manual Remote Swabbing and Microbiological Sampling and Teflon template tools Version , Rev.0
ASSEMBLY AND OPERATIONAL INSTRUCTIONS The remote swabbing and microbiological sampling tool and the Teflon template tool are shipped partially assembled. Complete assembly instructions are provided below: