A Basic Manual on Knife Throwing

Similar documents
Axe and Saw Permit: Safe Use of Axes

KNIFE GRASPS featured in the film "The Spoon, the Bowl and the Knife" a documentary about Wille Sundqvist

DIY Suspension Trainer - Take Your Gym Anywhere - Inspired by Monkii Bars 2

Knife Permit: Outdoor Knife Skills

AFMAN June

Auxiliary 63.5l Fuel Tank Ford/Mazda Pick-up Truck 2012-Current READ ME! IMPORTANT WARNING!

Vanagon Ladder Kit Assembly & Installation Instructions

How to Build A Super Powerful Grip

A Little About Knives

Model 205 Fireview Maintenance Kit

Axes. The information below will assist the Scout in obtaining their Forester badge.

GUIDE TO CHOOSING THE RIGHT GLOVE

INSTRUCTION SHEET DETHATCHER KIT. STS-422LX LPSTS-42JD Assembly Installation Operation Repair Parts L-1660-D. Visit us on the web!

Totin Chip Lesson Plan

All of these configurations are from one 2005 Blue Ultralite Trayman. Just slide the straps up and over your shoulders and they will slip into place.

Genesis. Side Burner Accessory Installation. Step 3. Step 1. Step 2. For use with Genesis Gas Barbecues Only

Mandolin Slicer Quite possibly the safest mandolin in the world

ANY HAMMOCK CARRIES INHERENT RISK AND ACCIDENTS MAY OCCUR. USE WITH CAUTION.

INSTRUCTION MANUAL ALEKO RETRACTABLE AWNING

Troop 55 Totin Chip Training Outline Supplies Needed:

Installation Instructions for the Rolltec Bravo Awning

The right knife for each job

FLEX KEY ASSEMBLY. ..._ o RAFTER ARM TUBE MAIN ARM TUBE CAP NUT CLAW HINGE

Shark Guard SGK1 Installation

Installation manual. Awning. V480 Cannes

Notes, Parts List & Drawings

Gas Go Anywhere /23/01

ALEKO Victoria Series Retractable Awning Instructions for Installation and Operation

Thomas Scientific Swedesboro, NJ U.S.A.

/ Tool and Equipment Safety Tether System (T.E.S.T.S)

The Groomers Scissor Guide

West Kingdom Thrust and Throw Example Weapon Construction

Instruction for edge trimming knife sharpening of M-Type shoe sewing machines

The Slammer.co.nz. the kiwi supertool. OperaTing Manual

Installation Instructions for the Rolltec Adalia X3M Extenda Awning

How to fillet a fish

Installation Instructions for the Rolltec Physique XL Awning

IMPORTANT NOTICE. Professional Mandoline Manual

Sun awning V225 Porto

Skills Session: Woods Tools Knife, Camp Saw, and Axe

Professional Mandoline Manual. Model: 90757

Product instruction manual Ream Cutting Systems RE3943, RE3946, RE3947, RE3971, RE3952E

Shark Guard Installation

User s Manual Trampoline 8

BUILD YOUR VERY OWN FLYING SAUCER!! VERY EASY TO CONSTRUCT AND ADJUST FOR FLYING

Introduction to Topographic Maps

Paperfox EVV-3 Cardboard Edge Protector Cutter. Instructions manual. Last modification: 03.MAR.2018.

User Guide. Tripod. flowtech 75 Tripod. Part No. V

Y Camper Shell Tracks, 37 Cross Bars. Y Camper Shell Tracks, 44 Cross Bars.

DOWN MANUAL. Aeros Ltd. St. Post-Volinskaya, 5 Kiev, UKRAINE

VEPR Round Drum Disassembly and Assembly

Copyright 2015 by Survival-Mastery.com. All rights reserved.

Installation and User s Manual 12 x 10 MOTORIZED AWNING

Primrose Awnings - Standard Manual Instructions

lyondellbasell.com lyondellbasell.com Hand Safety

18" Convert to Gel Log Set # 2610

BERYL Service Guide. Travel Adjust OTT Change

DIAMOND TECH INTERNATIONAL Innovations For Creativity DIAMOND LASER BAND SAW OPERATIONS MANUAL

GEAR GUIDE CABELA S SET NUMBER:

Contents PEOFESSIONAL GRADE PREMIUM QUALITY STAINLESS. Paring Knives 5. Boning Knives 1. Seafood Knives 1. Specialty Knives 5.

NEWMAR SERVICE SCHOOL

ESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 12 Salvage and Overhaul Operations Revised

ROYAL CANADIAN AIR CADETS PROFICIENCY LEVEL FOUR INSTRUCTIONAL GUIDE SECTION 9 EO C PRACTICE SAFE TOOLCRAFT PREPARATION

Whittling Chip Requirements

80070 TOP MOUNT CAMPER SHELL and TRANSIT CONNECT RACK TMCS_3:1

TROOP 22 TOTIN' CHIP REQUIREMENTS

1000M MANUAL Signature Series Slicer OPERATORS MANUAL

LITE Spear Awning Instructions

Motorized Cassette Awning E6100. Instruction ROHS

UW MEDICINE PATIENT EDUCATION. Breastfeeding is the healthiest way to feed your baby. It is also a skill that takes time and practice.

Installation manual. Drop-arm awning. V124 Calpe

Thank you for purchasing our Oyster Knife!

Building A Cooler Shelter

Instructions for Installation and Operation

University of Colorado, Colorado Springs Mechanical & Aerospace Engineering Department. MAE 4415/5415 Project #1 Glider Design. Due: March 11, 2008

Etac Relieve ergonomic knives

INSTALLATION INSTRUCTIONS AND OWNER'S MANUAL AWNINGS. For trailers & motor homes with straight sides TOOLS REQUIRED

Manual Awning. Assembly Instructions. Product No Toll-free:

The Frugal Ergonomic Engineer. By Dr. Len Walsh

Series 2050 Garden Window Frequently Asked Questions

LM601 Landmark Permanent Blind

Installation Guide Cable

Aviation Snips. Multi-Cable Cutter

4A1-114/114KR & 4A1-2 MANUAL TENSIONERS

Elite model AFILAmaq AC

JARVIS. Model 70 Airsnip Air Powered Scissors

OPERATOR INSTRUCTION MANUAL INCLUDING REPAIR PARTS FOR MODULAR GENERAL PURPOSE TENT SYSTEM (MGPTS) TYPE I

Contents. Introduction Technical description Adjusting your Goya The alternative methods of emergency parachute connection ...

SERVICE MANUAL- M126

MODEL # 1 MANUAL CAN OPENER

A good choice. By purchasing a DACAPO, you have opted for a MAY side-post umbrella of premium quality.

Solera Family and Screen Room. Installation and Owner s Manual (For Aftermarket Applications) Table of Contents

The Scout's 'Totin' Rights' can be taken from him if he fails in his responsibility. Knife Safety

Contents. Awnings USA - Full Protective Hood Manual Instructions ft 11" - 11ft 6" Awnings

Leica CE/ Leica CN. Knife holder

300 ft. 5/8 Hose wagon

OHENRY SECTIONAL TENT INSTRUCTIONS

Booster Seat Lesson Plan. For grades 1-3

How to Choose a Survival Knife What is a Survival Knife?

MODELING YOUR FUTURE IN AVIATION Official Air Youth course in elementary aeronautics

Transcription:

A Basic Manual on Knife Throwing By J. B. Wood Illustrated by Roy Pelz The author of this manual, Mr. J. B. "The Old Man of the Hills" Wood (Kentucky) is a well known writer on firearms and the outdoors. His articles appear in "Gun Digest", "Guns", "Gun World", "Guns and Ammo", "Shooting Times", "Better Camping" and many other sportsman magazines. Mr. Roy Pelz (Indiana) is an artifact collector as well as a fine artist. As Mr. Pelz is not a member of our association, we owe him a deep and sincere vote of thanks for donating his time and effort toward this manual. A Basic Manual on Knife Throwing is one of a series published by The AMERICAN MOUNTAIN MEN for the education of our members or others who are interested in the basic skills needed by the early Mountain Men. KNIFE-THROWING First of all, if your only knife is an original, authentic Bowie type, or a big "Arkansas Toothpick" which you have carefully made for yourself, don't risk throwing it. Riveted staghorn or bone handles and slim brass guards do not fare well under repeated impact into wood. If your knife was not specifically made for throwing, get or make one which has the right features. The blade should be at least 1/4 inch thick at the base and should be twice as long as the handle. The blade tang should pass all the way through the handle and if possible should also be of one piece with the helt cross-piece. Whether part of the blade or separate, the cross-piece should project less than the usual type. The less it sticks out, the less chance of it becoming bent or broken. Most true throwing knives have no cross piece at all. Bone or staghorn is fairly tough for handles, but rivets tend to loosen

and even these sturdy materials may split after much throwing. If bone or staghorn is used, the best method of attachment is a hole drilled lengthwise for a narrowed tang, the tang threaded at the pommel for a nut which can be tightened as necessary when it loosens. Nylon and fiberglass are ideal handle materials and are almost indestructible. Their modern appearance can be somewhat masked by staining a darker color. The blade may be any shape, but for a forceful throw must not be double-edged, a fact which will be obvious when we get to the proper throwing grip. Right now, let's lay to rest an old myth,. You have no doubt seen some self-styled "expert" balance a knife across his finger at the helt and pronounce it "perfect" for throwing. This, to put it mildly, is a lot of bull! A knife which will balance in this way is actually more difficult to control. The best throwing knife has a blade which is heavier than the handle, or vice versa. It doesn't really matter which as long as one end is heavier. The proper throwing grip is with the blunt edge toward the palm, the point lying near the base of the thumb, the thumb lying flat on the blade, pointing toward the helt. The fingertips grip in a row on the opposite flat of the blade. If this sounds confusing, consult illustrations # 1 and 2. Holding the knife by its point with thumb and forefinger, a grip that is necessary with double-edged blades for obvious reasons (See illustration #3), results in a total lack of power for all but the heaviest knives. In a serious situation a light knife thrown like this might make an opponent mad enough to really hurt you! We have all seen fantastic long-distance throws in scenes from films and on television. These, of course, are another myth. Around fifteen feet would be the maximum range for good control. Beyond this, point first impact is a matter of luck. Also, because of air resistance and the necessary adjustment in throwing force for control, much power is lost at the longer ranges. Between you and the target, a knife should make exactly one half turn. This half-turn is controlled by two factors: Angle of release and force of throw. Balancing these two elements is the thing that will require the most practice. At maximum range the release angle should actually be no angle at all, the knife horizontal, handle pointed straight at the target. As the distance decreases, the angle should increase. At very close range, the handle at release point might be vertical or perhaps actually pointing toward the rear. See illustrations #4,5,& 6. You might think that the horizontal release would give a quicker turn-over, since the elevated angle requires 1/4 to 1/2 more turn, but it doesn't work out that way for one good reason: Air resistance. With the horizontal release there is very little of it and the knife travels handle-first for a longer distance before starting to turn. With the angled release both the air resistance and the wrist action help to start the turn earlier. Force of throw also has a direct effect on the turn-over, in an obvious manner. The shorter time a knife is in the air, the less time to turn. Therefore a powerful throw at very close range is difficult to achieve. I prefer to always throw with as much force as possible and to adjust the release angle to the distance. Quite a bit of body action is necessary for a powerful throw. Assuming that you are right-handed, start with your weight on the right foot, arm drawn-back past the right ear, the knife vertical, handle pointed downward. While snapping the arm forward to a straight, extended position, take a long step with the left leg toward the target, leaning forward and transferring the weight to the left leg. Let the throwing

arm "follow through", the hand lightly striking the left leg near the knee. See illustrations # 7 & 8. My own pre-throw stance is fairly ridiculous-looking, as I balance for a moment on the right leg, the left foot slightly off the ground. Since artist Roy Pelz couldn't keep from laughing long enough to sketch it, we have omitted this illustration. Anyhow, perhaps it's better that you find your own most effective and comfortable position. The gymnastics of the throw may occasionally evince a snicker from some onlookers, but their derisive chuckles will likely cease when they see your knife quivering in the target. If not, you can always comment, as you work the blade loose from a two-inch penetration, that you haven't tried any live targets lately. Unfortunately, there are no "tricks" that I can pass along which will make you an instant expert at knife throwing. That critical balance between release angle and throwing force can only be attained by persistent practice with a suitable knife. Once you have mastered a particular knife, don't assume that you can do as well with any other knife. Your basic skill will be an advantage, but you'll find that each knife has its own throwing characteristics. Well, good luck and do not be discouraged if your first few dozen throws land handle first! Keep trying. Two views of the proper grip for throwing a singleedged knife: 1. the full length of the thumb, 2. three fingers on the blade.

3. The proper grip for throwing a double-edged knife. With this hold, not as much power can be delivered. The three release points- 4. is close range. Released from this angle, turn-over will occur more rapidly. 5. is medium range. 6. Long-range release point. With knife released

horizontally, it will travel for some distance handle first before starting turn-over. This is also the maximum power throw. 7. Body and arm position at moment of release. 8. Follow through. With a hard throw, hand should end by lightly striking the left knee. Back