ASSEMLY INSTRUTIONS V-122-2 - MISSION UN E TWIN FULL Thank you for purchasing this quality product. e sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and hardware. ompare with the parts list to be sure all parts are present. O NOT TITEN SREWS UNTIL OMPLETELY ASSEMLE" SIZE OF MATTRESS AN FOUNATION (SUPPORT) The up bed is designed to use a twin mattress ( 37 ½"- 38 ½" x 74-75" ) and bunkie board (37 ½ x 74 ). The low bed is designed to use a full mattress (53 ½"- 54 ½"x 74"-75") and bunkie board 53 ½"- 74". The total thickness must not exceed 9" inchess. Note: There must be at least 5" inches from top of mattress to top of guardrails. REPLAEMENT PARTS. Replacement parts, including additional guardrails, may be obtained from place of purchase or original distribution. TO OTAIN PARTS, PLEASE ONTAT: ONO TRAIN OMPANY - FORT WORT, TEXAS SAFETY WARNINS! 1- Follow the information on the warning label appearing on the upper bunk end structure and on the carton. o not remove warning label from bed. 2- Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls. 3- Surface of mattress must be at least 5 inchess below the upper edge of guardrails. 4- o not allow children under 6 years of age to use the upper bunk. 5- Prohibit more than one person on upper bunk. 6- Periodically check and ensure that the guardrail, ladder and other components are in their proper position, free from damage, and that all connectors are tight. 7- o not allow horseplay on or under the bed and prohibit jumping on the bed. 8- Always use the ladder for enterning and leaving the upper bunk. 9- o not use substitute parts. ontact manufacturer or dealer for replacement parts. 10- Use of a night light may provide added safety precaution for a child using the upper bunk. 11- If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall. 12-Always use guard rails on both long sides of the upper bunk. 13-The use of water or sleep flotation mattresses is prohibited. 14-eep these instructions for future reference. 15-Strangulation azard - Never attach or hang items to any part of the bunk bed that are not designed for use with the bed: for example, but not limited to, hooks, belts, and jump ropes, etc. Instru ctio ons IMPORTANT: PLEASE REA INSTRUTIONS EFORE STARTIN TE ASSEMLY
ASSEMLY INSTRUTIONS V- 122-2 MISSION UN E Thank you for purchasing this quality product. e sure to check all packing material carefully for small parts which may have come loose inside the carton during shipment. Separate, identify and count all parts and hardware. ompare with the parts list to be sure all parts are present. "O NOT TITEN SREWS UNTIL OMPLETELY ASSEMLE!! * Use of power tool to assemble this product will invalidate any claim and damage this product making unsafe!!! * Please assemble on a clean soft surface to avoid damage. + 11 12 1 10 2 9 3 8 4 7 5 6 2:00 h Tools Required (Not includ) (ammer) IMPORTANT: PLEASE REA INSTRUTION EFORE STARTIN TE ASSEMLY
Part List - V-122-2 MISSION UN E TWIN FULL SLAT TOP 6 SLAT OTTOM 5 3 2 4 1 1 2 Identifying the ardware-part list/ Identify the hardware using the illustrations below. A 1/4 x80 Screw 16 1/4" alf Moon 16 7,0 x 50 Screw 19 7,0 x 130 Screw 16 E 3,5x16 Screw 18 F 02 10 x 110 Wood owel 04 10 x 40 Wood owel 46 i 02 42 ex Screwdriver 01
01 X3 ATTENTION! PRER PRERILLE MARS MARS X1 SIERAIL FOR UP E - LAER SIE X2 X2 X5 10 x 40 Wood owel 40 ATTENTION! EA TOP ATTENTION! FOOT TOP X2 ATTENTION! EA/FOOT OTTOM
02 EAOAR / FOOTOAR - OTTOM 2x 1 2 Post # ATTENTION! Postmark ex Screwdriver 01 7,0 x 130 Screw 03 EAOAR / FOOTOAR - TOP 3 4 Post # ATTENTION! Postmark 5 6 Post # ex Screwdriver 7,0 x 130 Screw 01
04 Attention OTTON E - RIT OTTON E - LEFT 10 x 40 Wood owel 10 x 110 Wood owel 02 04
05 TOP E TOP E 10 x 40 Wood owel 04 06 OTTON E x2 x2 x2 x2 A 1/4 x80 Screw 1/4" alf Moon ex Screwdriver 01
07 E F OTTON E E Ex4 E 3.5x16 Screw 12 F 02 01 ex Screwdriver SIE-RAIL SLAT! The first slats must be fixed here at 3" from each headboard end.! INSTALL SLAT IT WIT SPAER TAPE TOP (FAIN UP). 12
09 TOP E x2 x2 x2 x2 A 7,0 x 50 Screw 05 ex Screwdriver 01 1/4" alf Moon 1/4 x80 Screw 10 SIE-RAIL S LA T! The first slats must be fixed here at 3" from each headboard end.! INSTALL SLAT IT WIT SPAER TAPE TOP (FAIN UP).
11 x3 x2 UAR RAIL 03 7,0 x 50 Screw ex Screwdriver 04 01 12 x3 03
13 14 i Ex4 i 7,0 x 50 Screw 10 02 E 3.5x16 Screw 04 ex Screwdriver 01
15 E SIE-RAIL E 3.5x16 Screw 02