tttttt www.wealdelectronics.com This publication is issued to provide outline information only and unless specifically agreed to the contrary by WEALD ELECTRONICS LTD. in writing, is not to form part of any order or contract or be regarded as a representation relating to the products or services concerned. WEALD ELECTRONICS LTD. reserve the right to alter without notice the product design, price or conditions of supply of any product or service. Whilst every effort has been made to ensure that the information contained in this catalogue is accurate, no responsibility can be accepted for any errors or omissions nor for the effects of such errors or omissions. 2

MOTORSPORT CONNECTOR ACCESSORIES CONTENTS Section 1: LMD7003/7004 series Protective caps General information and characteristics...... 3 Protective cap styles....... 4 Dimensions and ordering information........ 5, 6 Section 2: LMA8684 Series Nut plates General information and characteristics......... 7 Dimensions and ordering information....... 8 Section 3: LMA8688 Series Gaskets General information and characteristics......... 9 Dimensions and ordering information........ 10 Product Safety Information........... 11 This publication is issued to provide outline information only and unless specifically agreed to the contrary by WEALD ELECTRONICS LTD. in writing, is not to form part of any order or contract or be regarded as a representation relating to the products or services concerned. WEALD ELECTRONICS LTD. reserve the right to alter without notice the product design, price or conditions of supply of any product or service. Whilst every effort has been made to ensure that the information contained in this catalogue is accurate, no responsibility can be accepted for any errors or omissions nor for the effects of such errors or omissions. 2

LMD7003/7004 SERIES PROTECTIVE CAPS GENERAL INFORMATION Designed for bayonet coupling circular Autosport / Motorsport connectors, derived from MIL-DTL-38999 and JN1003 Ultra-lightweight design (up to 40% lighter than current design*) Corrosion resistant aluminium body Anti-vibration locking design Shell machined from solid material for reliable strength and performance Available with or without flexible stainless steel micro wire rope lanyards 3D models in all major CAD formats available CHARACTERISTICS Shell material Shell finish (standard) Gasket material Rope material Fastener materials Operating temperature Sealing * - depends on shell size and style Machined aluminium alloy Hard black anodising Silicone elastomer or Neoprene rubber Stainless Steel Copper and Kynar -55 C to +175 C Mated caps to IP67 PROTECTIVE CAPS FOR OTHER CONNECTORS AVAILABLE, INCLUDING MIL-DTL-38999 AND MIL-DTL-26482 STYLES 3

LMD7003/7004 SERIES PROTECTIVE CAPS STYLES AVAILABLE LMD7003 SERIES - PROTECTIVE CAPS FOR PLUG CONNECTORS PART NUMBER PROTECTIVE CAP STYLE SIZE 01 TO 06 SIZE 08 TO 24 LMD7003-**-00-005 Without Lanyard M SIZE 01 TO 06 SIZE 08 TO 24 LMD7003-**-0*-335 With Stainless Steel Lanyard LMD7004 SERIES - PROTECTIVE CAPS FOR RECEPTACLE CONNECTORS PART NUMBER PROTECTIVE CAP STYLE SIZE 01 TO 06 SIZE 08 TO 24 LMD7004-**-00-005 Without Lanyard SIZE 01 TO 06 SIZE 08 TO 24 LMD7004-**-0*-335 With Stainless Steel Lanyard * - denotes size. For dimensions and more ordering information see pages 5 and 6. 4

LMD7003/7004 SERIES PROTECTIVE CAPS DIMENSIONS AND ORDERING INFORMATION LMD7003 SERIES - PROTECTIVE CAPS FOR PLUG CONNECTORS www.wealdelectronics.com SIZE 01 TO 06 SIZE 08 TO 24 PART NO. EXAMPLE LMD7003 06(A) 02 33 5 WEALD SERIES PLATING (TABLE 4) SHELL SIZE (TABLE 1) LANYARD TYPE (TABLE 3) LANYARD LENGTH (TABLE 2) TABLE 1 SHELL Ø A ± 0,15 B ± 0,15 WEIGHT [g±10%] [mm] [mm] (WITHOUT LANYARD) 01 9.00 9.00 0.52 02 10.60 9.00 0.66 04 12.50 9.20 0.90 06A* 13.00 10.00 1.00 06 13.90 10.00 1.30 08 14.50 18.80 2.35 10 17.40 18.80 2.75 12 21.90 18.80 4.10 14 25.00 17.90 4.85 16 28.20 17.90 5.90 18 31.40 17.90 8.25 20 34.60 17.90 9.50 22 37.70 17.90 11.00 24 40.90 17.70 12.71 * - 06A cap mates with size 06-05 connectors. TABLE 2 REF. NO C ± 8 - LANYARD LENGTH [mm] STD FOR SHELL SIZE 00 NO LANYARD N/A 02 80 01 TO 06 03 125 08, 10 04 140 12 TO 18 05 150 22, 24 OTHER LENGTHS AVAILABLE ON REQUEST TABLE 3 REF. NO LANYARD AND ATTACHMENT TYPE 00 NO LANYARD 33 STAINLESS STEEL WIRE ROPE WITH FERRULES OTHER TYPES AVAILABLE ON REQUEST TABLE 4 REF. NO PLATING 5 HARD BLACK ANODISING OTHER VARIANTS AVAILABLE ON REQUEST 5

LMD7003/7004 SERIES PROTECTIVE CAPS DIMENSIONS AND ORDERING INFORMATION LMD7004 SERIES - PROTECTIVE CAPS FOR RECEPTACLE CONNECTORS www.wealdelectronics.com SIZE 01 TO 06 SIZE 08 TO 24 PART NO. EXAMPLE LMD7004 06(A) 02 33 5 WEALD SERIES PLATING (TABLE 4) SHELL SIZE (TABLE 1) LANYARD TYPE (TABLE 3) LANYARD LENGTH (TABLE 2) TABLE 1 SHELL Ø A ± 0,15 B ± 0,15 WEIGHT [g±10%] [mm] [mm] (WITHOUT LANYARD) 01 10.10 8.60 0.58 02 11.80 8.70 0.85 04 14.10 10.50 1.45 06A* 14.90 10.20 1.58 06 15.80 10.10 1.75 08 18.10 12.50 3.10 10 21.50 12.50 4.20 12 26.30 12.50 5.85 14 29.50 12.50 7.25 16 32.70 12.50 8.55 18 35.90 12.50 9.95 20 39.10 12.50 11.60 22 42.20 12.50 12.95 24 45.50 13.30 15.05 * - 06A cap mates with size 06-05 connectors TABLE 2 REF. NO C ± 8 - LANYARD LENGTH [mm] STD FOR SHELL SIZE 00 NO LANYARD N/A 02 80 01 TO 06 03 125 08, 10 04 140 12 TO 18 05 150 22, 24 OTHER LENGTHS AVAILABLE ON REQUEST TABLE 3 REF. NO LANYARD AND ATTACHMENT TYPE 00 NO LANYARD 33 STAINLESS STEEL WIRE ROPE WITH FERRULES OTHER TYPES AVAILABLE ON REQUEST TABLE 4 REF. NO PLATING 5 HARD BLACK ANODISING OTHER VARIANTS AVAILABLE ON REQUEST 6

LMA8684 SERIES NUT PLATES GENERAL INFORMATION Designed for two-hole oval flange mounted receptacle Autosport / Motorsport connectors derived from MIL-DTL-38999 and JN1003 Speed up connector installation in hard-to-reach locations Anti-vibration / self-locking design Lightweight and corrosion resistant Available in 16 sizes 3D models in all major CAD formats available CHARACTERISTICS Shell material Aluminium alloy Shell finish Anodised to MIL-A-8625F Type II Cl. 2 Nut material Stainless Steel 303 Nut finish Operating temperature Dry-film Lubricant -65 C to +175 C 7

LMA8684 SERIES NUT PLATES DIMENSIONS AND ORDERING INFORMATION SHELL SIZE PART NUMBER THREAD SIZE A ± 0,15 [mm] WEIGHT [g] 01 LMA8684-01-20-00 M2 12.00 0.29 02 LMA8684-02-20-00 M2 15.30 0.30 02 LMA8684-02-25-00 M2.5 15.30 0.32 04 LMA8684-04-20-00 M2 16.20 0.33 04 LMA8684-04-25-00 M2.5 16.20 0.35 06 LMA8684-06-25-00 M2.5 18.00 0.38 07 LMA8684-07-00-00 M3 19.80 0.57 08 LMA8684-08-00-00 M3 21.40 0.60 10 LMA8684-10-00-00 M3 25.90 0.63 12 LMA8684-12-00-00 M3 29.10 0.70 14 LMA8684-14-00-00 M3 32.50 0.72 16 LMA8684-16-00-00 M3 34.80 0.74 18 LMA8684-18-00-00 M3 38.20 0.79 20 LMA8684-20-00-00 M3 41.60 0.81 22 LMA8684-22-00-00 M3 45.00 0.91 24 LMA8684-24-00-00 M3 49.50 1.01 Recommended tightening torques* M2.0 20cNm (recommended), 30cNm (max) M2.5 40cNm (recommended), 60cNm (max) M3.0 60cNm (recommended), 90cNm (max) * - for guidance only, depend on fixings and mounting method. 8

LMA8688 SERIES GASKETS GENERAL INFORMATION Designed for two-hole oval flange mounted receptacle Autosport / Motorsport connectors derived from MIL-DTL-38999 & JN1003 Made from fluoroelastomer rubber Resistant to degradation through exposure to most motorsport fluids* Long-term sealing performance Available in 14 sizes 3D models in all major CAD formats available CHARACTERISTICS Material Continuous operating temperature Maximum operating temperature Fluoroelastomer rubber (Viton) -20 to +200 C +300 C * Note: Not recommended for long term immersion in fuels containing MEOH, ETOH, MTBE. etc. 9

LMA8688 SERIES GASKETS DIMENSIONS AND ORDERING INFORMATION SHELL SIZE PART NUMBER A ± 0,25 [mm] Ø B ± 0,20 [mm] Ø C ± 0,25 [mm] 01 LMA8688-01-00-00 12.00 7.00 2.20 02 LMA8688-02-00-00 15.30 8.80 2.70 04 LMA8688-04-00-00 16.20 10.50 2.70 06 LMA8688-06-00-00 18.00 12.05 2.70 07 LMA8688-07-00-00 19.80 12.35 3.20 08 LMA8688-08-00-00 21.40 12.50 3.20 10 LMA8688-10-00-00 25.90 15.50 3.20 12 LMA8688-12-00-00 29.10 19.55 3.20 14 LMA8688-14-00-00 32.50 22.72 3.20 16 LMA8688-16-00-00 34.80 25.90 3.20 18 LMA8688-18-00-00 38.20 29.07 3.20 20 LMA8688-20-00-00 41.60 32.25 3.20 22 LMA8688-22-00-00 45.00 35.40 3.20 24 LMA8688-24-00-00 49.50 38.60 3.80 10

PRODUCT SAFETY INFORMATION These notes are intended to be used in conjunction with the Product Catalogue and Product Specification. Products may be safely used in the applications for which they have been designed and within the specified rating and environments. If products are exposed to conditions outside the performance ratings or specified environments they may constitute a hazard. In particular it should be noted that:- 1. Material Content Circular Connectors generally use metalwork parts made of brass, aluminium, phosphor-bronze or steel, which, dependant on the particular application, may be passivated and protected with cadmium or zinc plate in conjunction with chromated or anodised surface finishes. The insulating materials can either be natural or synthetic rubber, together with plastic or glass-filled plastic moulded parts. Contact materials vary but are usually made of brass, phosphor-bronze, alumel or chromel. 2. Electric Shock, Burns and Fire Hazard can occur if the product is used outside the specified parameters or if the product is damaged, wrongly wired, poorly assembled, poorly integrated into larger equipment, or contaminated with conductive fluids. Live circuit terminations must be protected and live circuits never broken by disconnecting products. Hot spots may be created when resistance is increased due to damage or incorrect integration particularly soldering, or loose terminations. Overheating can cause breakdown of insulation, electric shock, burns or, ultimately, fire. In the event of fire noxious and/or toxic fumes may be released and, in these circumstances, any fire involving the product should be dealt with by personnel properly equipped. Connectors with exposed terminations or contacts should not be used on the current supply side of a circuit with exposed contacts on an unmated product. Before making a circuit live, the product and wiring should be checked to ensure there is no electrically conducting debris present. Circuit resistance checks should also be conducted before making the circuit live. Always ensure that connectors are assembled and wired by properly trained personnel. 3. Use, Transport and Storage of Products Care must be exercised to avoid damage to any part of the products during transporting, storage or use. Abnormal transit or storage conditions and abuse during installation can give rise to damage. Products should not be used in a damaged condition. Improper storage (particularly of damaged products) can give rise to additional hazards particularly corrosion. Attention is specifically drawn for the proper storage of products containing cadmium and you are advised to see the Guidance Note from the Health and safety Executive on Cadmium Health and Safety Precautions. 4. Disposal of Products Product should not be burnt. SAFETY RULES 1. FOLLOW THE GUIDELINES GIVEN. 2. ALWAYS PROTECT LIVE CIRCUITS AND NEVER DISCONNECT A LIVE CONNECTOR. 3. NEVER USE A DAMAGED CONNECTOR. 4. NEVER BURN DISCARDED CONNECTORS. 11