Tabletop Kit 01 TK-TTK-01 Make a statement with an easy-to-assemble tension fabric Hopup tabletop display with spotlights. A custom-printed stretch table throw that fits standard 6ft tables & a single-sided, premium retractable banner stand with printed fabric graphic add additional real estate for branding & messages. A sleek, silver literature rack features ten pockets for brochures & collateral while a shipping case, covered with a stretch fitted fabric graphic, doubles as valuable counter space. We are continually improving and modifying our product range and reserve the right to vary the specifications without prior notice. All dimensions and weights quoted are approximate and we accept no responsibility for variance. E&OE. See Graphic Templates for graphic bleed specifications. 07/01/13 features and benefits: - 2x2 Hopup frame with graphic & end caps (straight) - 2 - Lumina 1 display lights (chrome) - 6ft stretch table throw - Imagine banner stand with Oxford graphic (silver) dimensions: Hardware 2x2 Hopup Assembled Unit: 60.5 w x 60.5 h x 12.25 d 1,536.7mm(w) x 1,536.7mm(h) x 311.15mm(d) Imagine Assembled Unit: 34.25 (w) x 87 (h) max x 8.50 (d) approx. 870mm(w) x 2210mm(h) x 220mm(d) approx. 6 Stretch Table Throw Assembled Unit: 30 w x 72 h x 30 d 762mm(w) x 1829mm(h) x 762mm(d) Innovate Assembled Unit: 14.75 w x 53.5 h x 12 d 374.65mm(w) x 1359mm(h) x 304.8mm(d) OCP2 Case to Counter Assembled Unit: 41 l x 27 w x 18 h 1,041.4mm(l) x 685.8mm(w) x 457.2mm(h) Shipping Shipping dimensions: (OCP2) 40 l x 26 w x 18 h 1016mm(l) x 660.4mm(w) x 457.2mm(h) Shipping weight: 86 lbs/ 39 kg - Innovate literature rack - OCP2 shipping case - OCP2 stretch wrap - Products and graphics included in each kit are limited to their own specific warranties Graphic Refer to related graphic templates for more information Please be sure to include a 2 bleed around the perimeter additional information: Graphic Material: Hopup - Power Stretch Imagine - 8 oz. Oxford Table Throw - Power Stretch OCP2 case to counter - Power Stretch *See second page for recommended packing Warranties Hopup frame - lifetime limited Lumina 1 lights - 1 year Imagine banner stand hardware - lifetime limited 6ft stretch tablethrow - 6 mo. graphic limited Innovate literature rack - 5 year OCP2 case - 1 year OCP2 stretch wrap - 1 year * All graphics produced for indoor application hold a graphic warranty of one year. All graphics produced for an outdoor application hold a graphic limited warranty of six months.
Packing Instructions Remove Innovate literature rack from its shipping box and place inside the OCP2 Place the Hopup 2x2 along side of Remove the Imagine banner stand from the shipping box and place Place the Lumina 1 lights inside 1 the Innovate literature rack 2 inside the OCP2 3 OCP2 along the back of the case. 4 Place the 6ft stretch wrap table throw on the top of the lights Place the OCP2 stretch wrap graphic on top of the hardware 5 inside the OCP2 6
2x2 Hopup Setup Hopup Graphic Attachment Stretch frame to size. Make sure webbing is not wrapped Snap all purple locking Graphic attaches to frame with Velcro. Start in one corner and Remove unit from rolling bag. 1 around purple locking arms. 2 Align all purple locking arms. 3 arms into place. 4 move on to the next. 5 To Attach End Caps HOPUP W/GRAPHIC ATTACHED SET UP Graphic application is complete. 6 Pull end caps down to corner of frame and attach. Attach other corner. 7 Repeat on opposite side. 8 Lift frame into place. Unit is complete. 9 Remove unit from rolling bag.1 Stretch frame to size. Make sure webbing is not wrapped Pull frame outward and Snap all purple locking around purple locking arms. 2 align purple locking arms. 3 arms into place. 4 Unit is locked and graphic is attached. 5 Lift frame into place. 6
2x2 Hopup Setup Continued Attach Stabilizer Feet To Attach Lights Start with the largest end of After applying graphic, the opening; Slide stabilizer Move to other hubs on the flip Hopup on its side to foot over both hubs. Feet will same side of the frame; slide Once finished, flip frame access bottom hubs. 1 fit snuggly over hubs. 2 second foot over hubs. 3 right side up. Unit is complete. 4 Slide light onto light base on top of frame. 1 To Collapse To collapse unit, first remove end cap graphics on both sides and fold onto top of frame. 1 Unlock all purple locking arms. *Note: for 5x3 size, release locking arms from outside perimeter frame to the inside. 2 Once all arms are unlocked, slowly push frame inward to collapse. 3 Continue to collapse frame, making sure graphic and webbing do not entangle with purple locking arms. 4 Store unit into rolling bag. Be sure bag straps do not wrap around purple locking arms. 5 To ensure quality, please note: If the webbing is wrapped around the purple locking arm, the arm can snap off when opening the unit. When setting up, ensure that the arms are aligned. If not, the arms will snap when pressure is applied. When packing unit in the bag, ensure that the strap is not partially wrapped around an arm. If it is, the arm will snap when pulled out of the bag. When placing in a non-roller bag, ensure that arms are not outside of the bag. Do not use the purple locking arm to lift unit. ALWAYS lift by the frame.
Imagine Setup Gently lean the unit back and pull Twist telescopic p ole to extend 1 Secure pole(s) in the base of stand 2 the graphic up by the toprail 3 Leveling feet located under unit 4 Graphic to top rail attachment (metal insert) Metal Insert Metal Insert Metal Insert Loosen each screw from the rail using provided allen key and remove metal insert (do not remove screws) Peel film to expose adhesive; place metal insert from graphic rail on top Press down on the metal insert to make sure adhesive is secure on Insert the metal insert with graphic attached into the top graphic 1 back side of the graphic point 2 graphic 3 profile rail 4 Quick slide top rail attachment (plastic insert) top slider printed side down Tighten the screws back in place to hold metal insert and graphic with an allen key 5 Remove top slider from graphic rail 1 Remove film to expose adhesive on top slider Align and apply to top slider on the 2 top front of graphic 3
Graphic to base attachment Insert graphic onto graphic rail 4 1 Flip open the cassette door Carefully remove the cassette from the outer cartridge 2 Line the bottom of the back of graphic print with adhesive tape on white leader strip 3 Remove pin while holding onto the graphic so the graphic does not retract back in quickly 6 Slowly retract the graphic back into the base. Once aligned pull adhesive tape slowly while applying pressure to graphic 4 to adhere tape Place additional masking tape to the back of the graphic for extra protection 5 graphic back graphic front Place interchangeable cartridge back into the outer cartridge with graphic retracted back in 8 top rail slider 7
Innovate Literature Rack Setup Unzip the bag and cut the yellow bands Remove top section and bottom Slide bottom section of unit 1 Remove unit from bag 2 section of boxes 3 onto the base 4 Slide top section of unit onto the bottom section 5 Stretch Tablethrow Setup 1 2 Set-up is complete 3
OCP2 Case Conversion Assembly Release the 4 locks on the sides of case. Remove the counter top from underside of case lid. 1 2 Place counter top onto case lid, shiny Place lid back onto case side down. Secure counter top with and lock all four locks. 3 Velcro strips on corners. 4 Pull the stretch graphic Stretch the graphic down to the over the top of the case. 5 bottom of the case and pull under. 6 7