TRI-BALL HITCH WITH CLEVIS OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #403
Thank you very much for choosing an Ultra-Tow Product! For future reference, please complete the owner s record below: Model: Purchase Date: Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This product is designed for certain applications only. The distributor cannot be responsible for issues arising from modification. We strongly recommend this product not be modified and/or used for any application other than that for which it was designed. If you have any questions relative to a particular application, DO NOT use the product until you have first contacted the distributor to determine if it can or should be performed on the product. For technical questions please call -800-222-538. INTENDED USE 3-in- interchangeable triple hitch ball mount with clevis gives you three chrome balls and one clevis on one convenient rotating assembly. Fits 2in. hitches. TECHNICAL SPECIFICATIONS & PACKING LIST Item Finish Max. Gross Trailer Weight Capacity GENERAL SAFETY RULES Description Red powder coat 7/8in. ball 6000-lb. capacity 2in. ball 7500-lb. capacity 2 5/6in. ball 0,000-lb. capacity Clevis Hook 7500-lb. capacity WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS WORK AREA Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents. Keep children and bystanders away while using tri-ball hitch with clevis. Distractions can cause you to lose control, so visitors should remain at a safe distance from the work area. Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards in your work area, particularly those hazards below the work surface hidden from the Page 2 of 5
operator s view that may be unintentionally contacted and may cause personal harm or property damage. Be alert of your surroundings. Using a tri-ball hitch in confined work areas may put you dangerously close to cutting tools and rotating parts. PERSONAL SAFETY Use personal protective equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Do not overreach. Keep proper footing and balance at all times. This enables better control of the hitch in unexpected situations. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. USE AND CARE Do not force the hitch. Use the correct size mounting ball and clevis for your application. The correct product will do the job better and safer at the rate for which it was designed. Store an idle hitch out of the reach of children and do not allow persons unfamiliar with the hitch and clevis or these instructions to install or use it. Use the hitch in accordance with these instructions and in the manner intended for the particular type of equipment, taking into account the working conditions and the work to be performed. OPERATION The hitch can be attached four different ways, depending on the intended use. Each different size of ball and clevis is rated to handle a different load capacity. To attach the tri-ball hitch with clevis to a receiver hitch, insert the shank of the tri-ball hitch with clevis into the receiver hitch. Align the side holes located in the shank of the tri-ball hitch with clevis and the receiver hitch. Then, insert the 5/8in. receiver pin (not included) all the way through the holes, attach an R pin (not included) to the open end of the receiver pin. CAUTION: Before towing, be sure that the connection between the hitch and the load is properly secured and locked in place. If the wrong size ball is used for towing, severe personal injury, property damage, or death may result; consult the manual for the appropriate ball size and connector to be used. MAINTENANCE Maintain your hitch. Before each use, inspect the general condition of the hitch. Check for loose hardware, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation. Keep all moving parts lightly lubricated to prevent corrosion. After use, wipe external surfaces of the tool with clean cloth. Page 3 of 5
DIAGRAM & PARTS LIST Item Description Qty. 2in. ball 2 2 5/6in. ball 3 7/8in. ball 4 2in. x 2in. solid shank 5 Clevis 6 Pin Page 4 of 5
WARRANTY One-Year Limited Warranty Distributed by Northern Tool + Equipment Co., Inc. Burnsville, MN 55306-6936 Made in China Page 5 of 5