Pricebook Version 12.0

Transcription

1 Pricebook Version 12.0 Terms and onditions Terms and onditions Quick Reference 2 rmation 3 Terms and onditions 4 Warranty Policy 6 Warranty Return Policy and Procedure 8 Accommodation Return Policy and Procedure 9 Karl Dungs, Inc Pheasant Ridge Drive NE, Suite 150 Blaine, MN U.S.A. Phone: (763) Fax: (763) info@karldungsusa.com

2 Pricebook Version 12.0 Details in section & & Terms and onditions - Quick Reference Order Processing A $50 minimum order amount is required. After 1:30pm T a $35 Expedite Fee will be assessed. State Sales tax may be assessed unless an exemption certifi cate is forwarded to Dungs prior to order processing. A ancellation Fee may be assessed for orders cancelled after order-entry at the ompany s discretion. Expedited airfreight charges may be quoted for non-stock and Stock lass items as an alternative to standard seafreight. Shipping Standard terms are FA Blaine, Minnesota. Transfer of Title occurs once product leaves the Karl Dungs dock. Normal shipping hours: 8:00am-1:30pm entral Time. Orders that require shipment after 1:30pm entral Time will be assessed a $35 Expedite Fee. Shipping after 1:30pm entral Time is subject to company discretion. Exports Orders requesting direct shipment to a destination outside the contiguous United States, Alaska or Hawaii may be subject to processing, shipping and exportation fees as determined by the company. Prior to incurring costs, Karl Dungs will provide an estimate to the purchaser for approval. In lieu of a formal quote a minimum of $75 export paperwork fee can be expected. Payment Standard terms are Net 30 days subject to approved credit. OD OLLET payment is accepted, with certifi ed funds required on shipments greater than $1000 USD. Masterard, Visa, American Express and Discover are accepted. Accommodation and Warranty Returns A Return Authorization (RA) number must be obtained from Dungs prior to the return of any product to Dungs. Please refer to the enclosed RA form. Purchaser assumes all carrier charges and responsibility for damages in transit unless preauthorized by Karl Dungs, Inc. RA numbers are valid for 30 Days. If returned goods are not received within 30 days, the RA number is cancelled and a new RA number must be obtained. Accommodation return consideration may not be allowed for assembled items and non-stock products. A minimum 15% Restock Fee will be assessed for accommodation if the return product is new, unused and in its original container. Request for evaluation for failure mode may be assessed a minimum $50 evaluation fee if the product is not under warranty. ontact ustomer Service for evaluation fee quote. Replacement units will be immediately shipped with normal charges until the returned product can be evaluated by Dungs. Nonstock/special order items (items not listed in the price book) cannot be cancelled once the purchase order is accepted and acknowledged. Nonstock/special order items cannot be returned under the accommodation return policy. All sales are fi nal. 2 10

3 Pricebook Version 12.0 Terms and onditions 2.0 Stock lass Definitions Stock lass A: Stock lass B: Stock lass : Stock lass NP: Stock lass O: Normally carried in stock for immediate shipment Modest inventory carried in stock *all ustomer Service for delivery information Not normally carried in stock *all ustomer Service for lead time New Product *all ustomer Service for lead time Obsolete item *Available while inventory lasts STOK LASSIFIATIONS ARE SUBJET TO HANGE WITH NOTIE *Product availability can be confi rmed at the time of order. Lead time for items not in stock can reach up to 16 weeks without expediting shipments. Lead times may be improved subject to items already in transit or expediting a shipment with a charge. Please contact ustomer Service for assistance. 3 10

4 Pricebook Version 12.0 Terms and onditions 3.0 GENERAL The possession of the Karl Dungs Inc. catalog and /or literature is not to be construed as an offer to sell the goods listed therein. All orders shall be subject to the approval and acceptance of Karl Dungs Inc., hereinafter referred to as the ompany, at its principal office at 3890 Pheasant Ridge Drive NE, Blaine, MN All ompany proposals, all acceptances of any order from a purchaser hereinafter referred to as the Purchaser, and all sales by the ompany are expressly limited to, and expressly made conditional upon, the Purchaser s acceptance and assent to the Standard Terms and onditions of Sale as set forth herein, notwithstanding receipt of, or acknowledgment of, the Purchaser s order form or specifi cations containing additional or different provisions, or confl icting oral representations by any agent or employee of the ompany. No waiver, change or modifi cation of any terms or conditions on the face or reverse hereof shall be binding on the ompany unless made in writing and signed by an officer of the ompany. 3.1 PRIES AND TERMS All prices are subject to change without notice. Minimum billing is $50.00 USD. Terms are 30 days net, subject to approved credit or credit card payment and subject to availability. OD OLLET payment is accepted, with certifi ed funds required on shipments greater than $1000 USD. Shipments can be expedited, prior to establishing credit, by including check with order for full amount, specifying OD OLLET or credit cards, subject to availability. Progress payments may be required on large orders at the ompany s discretion. Orders originating outside the contiguous United States, Alaska, Hawaii, or anada shall be subject to cash in advance or pre-approved credit terms. Prices stated in ompany s price book are for quantities released per shipment. To qualify for quantity discount pricing, parts purchased must be: On one purchase order with one purchase order number. Have one bill to and one ship to address. One set of freight terms per purchase order. Modifi cations to blanket order purchases are subject to company approval. Normal shipping hours: 8:00 am-1:30pm entral Time. Orders that require shipment after 1:30pm entral Time will be assessed a $35 Expedite Fee. Shipping after 1:30 entral Time is subject to company discretion. The ompany reserves the right to ship controls and invoice for same even though minor components are backordered, if the missing items are late due to circumstances beyond the ompany s control and said components will not prohibit initial installation work by the Purchaser. SHIP OMPLETE must be specifi ed on the purchase order if a complete shipment is required. At the discretion of the ompany, a fi nance charge at a periodic rate of 2% per month (annual percentage of 24%) or the maximum permitted by law, whichever is less will be added to unpaid invoices over 60 days old, with interest accruing from the date of invoice. 3.2 DELIVERY The quoted time of delivery is understood to be from date of receipt of all necessary information including credit approval, bill to and ship to addresses, approved blueprints or schematics and the Purchaser s approval, if applicable. Any delay in delivery of any installment shall not relieve the Purchaser of its obligation to accept remaining deliveries. Revisions made to an order after initial processing are subject to ompany review and may add to or delay deliveries previously promised. The ompany shall not be liable for damages or for cancellation of any contract as a result of any delay due to any cause beyond the ompany s reasonable control including, but not limited to, act of God, act of the Purchaser, embargo, or other governmental acts, regulations or requirements, fi re, accident, labor disputes, war, civil insurrection or riot, delay in transportation, or the inability to obtain necessary labor, materials, or manufacturing facilities. In the event of any such delay, the date of delivery shall be extended for a period equal to the time lost by reason of the delay. All shipments, unless otherwise specifi ed, shall be FA shipping point and the Purchaser assumes responsibility for damage or loss in transit. The ompany shall not be liable or responsible by reason of the mode or route of shipment. 4 10

5 Pricebook Version PAKAGING All prices are based on standard domestic packaging. For special handling requirements the Purchaser must contact the ompany for pricing. 3.4 PURHASER S PURHASE ORDER TERMS The terms on the Purchaser s purchase order shall not change, enlarge, or modify the ompany s liability or obligations. 3.5 SHORTAGE AND BREAKAGE The ompany s responsibility for delivery of materials sold FA shipping point ends when the receipt is obtained from the consignor of the transportation company. It is agreed that the Purchaser shall notify the ompany of any shortage within fi fteen (15) days from receipt of the material. In the event of loss or exchange incurred in transit, the carrier shall be responsible and claims for parts broken or lost in shipment are to be fi led with the transportation company by the Purchaser. 3.6 ANELLATION OF ORDERS If, for any reason, the Purchaser desires to cancel an order, such cancellation shall only be with the consent of the ompany. At its discretion, the ompany may charge for all costs incurred which shall include but not be limited to, material, labor, overhead, and reasonable profi t. 3.7 RETURNS AND RESTOKING HARGES See Karl Dungs, Inc. Warranty Return Policy and Procedure and Accommodation Return Policy and Procedure. 3.8 TAXES Any tax or taxes that may be imposed upon the goods that are the subject of the sale or delivery of the ompany s products shall be added to and become a part of the contract price. 3.9 REGULATIONS Every contract of sale shall be subject to all applicable state and federal statutes and regulations and where applicable, export regulations. The terms of the agreement between the ompany and the Purchaser shall be construed in accordance with the laws of the state of Minnesota, without giving effect to choice of law principles thereof Exports Orders requesting direct shipment to a destination outside the contiguous United States, Alaska or Hawaii may be subject to processing, shipping and exportation fees as determined by the company. Prior to incurring costs, Karl Dungs will provide an estimate to the purchaser for approval. In lieu of a formal quote a minimum of $75 export paperwork fee can be expected. 5 10

6 Pricebook Version 12.0 Warranty Policy 4.0 PERFORMANE GUARANTEE Karl Dungs, Inc. (the ompany ) guarantees to the original purchaser (the Purchaser ) that equipment manufactured by the ompany or Karl Dungs GmbH will be free from defects in material or workmanship and will perform at rated capacity as stated only when: Properly installed, connected, started, operated and maintained in accordance with ompany Instruction(s), and or Information Guide(s), as revised from time to time, and used for the applications specifi ed and used in the environment as specifi ed or as limited. Due to the nature of fuel fi red equipment, its controls and accessories, there will always exist an explosion and fi re hazard. To minimize such hazard, this equipment must be installed, operated and maintained in accordance with the appropriate instruction(s) and/or Information Guide(s), as revised from time to time. Purchasers of the ompany s equipment waive subrogation on all items covered under their own or other insurance. 4.1 LIMITED WARRANTY ON THE ONTROLS THEMSELVES The ompany warrants its manufactured products to the original Purchaser for a period of one year from date of invoice or two years from date of manufacture, whichever is greater, to be free from defects in material and workmanship under normal use, service and maintenance. Normal use, service and maintenance means: a. Not in excess of the maximum pressures, temperatures, volumes and rated capacities or other parameters specifi ed in the ompany s Product Bulletin, Specifi cation Sheets, and/or quotation(s). b. Using only fl uids specifi ed in the ompany s Product Bulletin, Specifi cations Sheets, and/or quotation(s). c. Operation and maintenance in compliance with the appropriate Instructions and/or Information Guides. This warranty does not apply to sensors and limited life electrical components such as batteries, fuses, lamps and the like. In addition, the ompany accepts responsibility only for the equipment manufactured by the ompany or Karl Dungs GmbH. However, the ompany will extend to the Purchaser the benefi t of whatever warranty is extended by the manufacturer for non Dungs manufactured products. This warranty shall not apply to defect resulting from negligence or accident, improper or inadequate storage or maintenance by the Purchaser, unauthorized modifi cations or misuse. In addition, this warranty does not apply to damage caused by any or all of the following circumstances or conditions: a. Freight damage. b. Parts and/or accessories or components not obtained from or approved by the ompany. c. Any consequential or incidental damage arising from the use of the product, system or other goods manufactured or sold by the ompany. d. Misapplication, misuse, abuse, or failure to follow the ompany s Product Bulletins or Specifi cation Sheets. The remedy under this warranty is limited to the repair or replacement, without charge for labor or materials, of any parts found upon examination by the ompany to have been defective, and shall not include fi eld installation costs, if any, involved in the exchange. The remedy shall be conditioned upon receipt of written notice by the ompany of any alleged defects promptly after discovery thereof within the warranty period. Generally, consent, if given, will be upon the condition that the Purchaser assumes and prepays all carrier charges. THE FOREGOING WARRANTY IS EXTENDED BY THE OMPANY ONLY TO ORIGINAL PURHASERS OF PRODUTS AND IS VALID ONLY FOR PRODUTS USED WITHIN THE UNITED STATES OR ANADA. THE WARRANTY AND REMEDIES SET FORTH HEREIN ARE EXLUSIVE AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, WRITTEN OR ORAL, INLUDING ANY IMPLIED WARRANTIES OF MERHANTABILITY OR FITNESS FOR ANY PARTIULAR PURPOSE, ARE HEREBY EXLUDED. IN NO EVENT SHALL THE OMPANY BE LIABLE FOR SPEIAL INI- DENTAL OR ONSEQUENTIAL DAMAGES OR LOST PROFITS OF ANY KIND. No person, including any dealer or representative of the ompany, is authorized to make any representations concerning the ompany products or systems on behalf of the ompany or to assume for the ompany the obligations contained in this warranty. The ompany reserves the right to make design and other changes, modifi cations or improvements upon its products or systems, without any obligation to install same on any previously sold or delivered products or systems. 6 10

7 Pricebook Version LIMITATION OF LIABILITY It is expressly agreed that the ompany s liability under the foregoing warranty is limited and the ompany does not function as an insurer. The Purchaser and user agree that the ompany is not liable for loss, harm or damage due directly or indirectly to any occurrence or consequence therefrom. If the ompany should be found liable to anyone under any theory (except any express warranty where the remedy is set forth in this document) for loss, harm, or damage, the liability of the ompany shall be limited to the lesser of the actual loss, harm, or damage, or the original purchase price of the involved equipment, system or service when sold (or when service preformed) by the ompany to the Purchaser. This liability is exclusive and regardless of cause or origin resulting directly or indirectly to person or property from: a. The performance or nonperformance of any obligation set forth in this warranty policy. b. Any agreement, oral or written, including specifi cations, between the ompany and the customer. c. Negligence, active, passive or otherwise, of the ompany or any of its agents, employees, or independent contractors. d. Breach of any judicially imposed warranty of covenant and, e. Misrepresentation or strict liability involvement. 7 10

8 Pricebook Version 12.0 Warranty Return Policy and Procedure 5.0 DEFINITION, PURPOSE AND OVERVIEW Warranty return of a product is permitted if the product fails to perform to the specifi cations published by Karl Dungs, Inc. (the ompany) The purpose of the Warranty Return Policy and Procedure is to improve customer service through establishment of a consistent system for the control of products returned to the ompany. We will make every effort possible to try to meet and exceed our customers expectations for service. To meet these service expectations it is important that an RA (Return Authorization) number be assigned to all returned products. ontrols may be returned only upon prior written authorization of the ompany for all products returned to the ompany. To obtain authorization for warranty return of products purchased from a Distributor or a Representative contact the Distributor or Representative or ustomer Service directly to obtain an RA number. 5.1 INSTRUTIONS FOR RETURNS 1. Refer to the Warranty Policy terms (see page 4) for return of product. 2. Obtain an RA number from ompany ustomer Service at or at: info@karldungsusa.com (if a replacement control is immediately required call rather than ustomer Service). 3. omplete the RA form provided on the Price Book D with the RA number obtained from Dungs and place a copy with the returned goods. 4. learly mark the outside of all shipping cartons with the RA number. 5. Except for valve train assemblies, all component pieces originally shipped with the control being returned must be returned in their entirety. For return of valve train assemblies or components of valve trains assemblies contact DUNGS customer service. 6. Purchaser assumes all carrier charges and responsibility for damages in transit unless preauthorized by Karl Dungs, Inc. 5.2 ADMINISTRATIVE POLIY TERMS Where a replacement product is immediately required, the ompany will ship a replacement unit and bill the Purchaser accordingly. If it is determined that it is a valid warranty and failed within the warranty period the replacement charge will be credited. If DUNGS has determined that it is a valid warranty and a replacement control has not been provided, a no charge replacement will be provided unless a credit is specifi cally requested. All returned materials require an RA number, issued by the ompany. Product returned without this information may incur processing delays and may be returned freight collect to the shipper. Products must be returned to the ompany within thirty (30) days from issuance of an RA number. If product is not received within 30 days the authorization may become void and a new RA number will need to be obtained. 5.3 PAKAGING & SHIPPING INSTRUTIONS Package products carefully and seal to prevent foreign materials from entering product and damage during transit. The ompany is not responsible for damage incurred during transit or as result of insufficient packaging. Print the RA number legibly on the outside of ALL cartons in BOLD visible numbers. Reference the RA number on any documentation returned with product. Freight collect or OD returns will not be accepted unless approved by the ompany in advance of shipment. ontact the ompany for additional information or assistance. Phone: Fax: info@karldungsusa.com Ship all returns freight prepaid to: Karl Dungs Inc 3890 Pheasant Ridge Drive NE Suite 150 Blaine, MN

9 Pricebook Version 12.0 Accommodation Return Policy and Procedure 6.0 DEFINITION, PURPOSE AND OVERVIEW Accommodation returns of product to Karl Dungs, Inc. (the ompany ) are permitted when: 1. Product is ordered in error. 2. Product is incorrectly shipped. 3. Product is ordered correctly but later determined not to be needed. 4. Product is returned for repair. Nonstock/special order items (items not listed in the price book) cannot be cancelled once the purchase order is accepted and acknowledged. Nonstock/special order items cannot be returned under the accommodation return policy. All sales are fi nal. The purpose of the Accommodation Return Policy and Procedure is to improve customer service through establishment of a consistent system for the control of products returned to the ompany. We will make every effort possible to try to meet and exceed our customers expectations for service. To meet these service expectations it is important that an RA (Return Authorization) number be assigned to all returned products. ontrols may be returned only upon prior written authorization of the ompany for all products returned to the ompany. To obtain authorization for return of products purchased from a Distributor or a Representative contact the Distributor or Representative directly to obtain an RA number. If the material was purchased directly from the ompany, please contact the ompany ustomer Service Department for an RA number. 6.1 INSTRUTIONS FOR RETURNS 1. Refer to the Warranty Policy terms (see page 8) for return of product. 2. Obtain an RA number from ompany ustomer Service at or at: info@karldungsusa.com (if a replacement control is immediately required call rather than ustomer Service). 3. omplete the RA form provided on the Price Book D with the RA number obtained from Dungs and place a copy with the returned goods. 4. learly mark the outside of all shipping cartons with the RA number. 5. Except for valve train assemblies, all component pieces originally shipped with the control being returned must be returned in their entirety. For return of valve train assemblies or components of valve trains assemblies contact DUNGS customer service ADMINISTRATIVE POLIY TERMS Generally, consent, if given, will be upon the condition the Purchaser assumes all carrier charges including; but not limited to: freight, duty and importation cost. The customer is also responsible for damages in transit, and a restocking charge, and then only if the so authorized material is in new and unused condition, in the original packaging and returned within three months (repairs exempted) from the original date of shipment. If product is returned for repair, the ompany will return the product under the same shipping terms that the product was originally sent to the ompany. Restocking charges apply to goods returned for credit and do not apply to repair returns. Restock charges are generally 15% of the purchase price but are subject to increase depending on the condition of the packaging, return date versus original shipment date, and other factors that may increase restock costs. For non-stock items, special order, and assemblies that were ordered specifi cally to a customer specifi cation, returns may not be allowed, or restocking charges might be higher than they would be on a similar stocked product. Non stock and special order items are those products that are not listed in the ompany price book pages. Request for evaluation for failure mode may be assessed a minimum $50 evaluation fee if the product is not under warranty. ontact ustomer Service for evaluation fee quote. When it is necessary to return products as a result of a ompany error; full credit will be issued or the incorrect product replaced providing the product is new, unused, and in restockable condition. All returned materials require an RA number, issued by the ompany, product returned without this information may incur processing delays and may be 9 10

10 Pricebook Version 12.0 returned freight collect to the shipper. Products must be returned to the ompany within thirty (30) days from issuance of an RA number. If product is not received within 30 days the authorization may become void and a new RA number will need to be obtained. 6.3 PAKAGING & SHIPPING INSTRUTIONS Package products carefully and seal to prevent foreign materials from entering product and damage during transit. The ompany is not responsible for damage incurred during transit or as result of insufficient packaging. Print the RA number legibly on the outside of ALL cartons in BOLD visible numbers. Reference the RA number on any documentation returned with product. Freight collect or OD returns will not be accepted unless approved by the ompany in advance of shipment. ontact the ompany for additional information or assistance. Phone: Fax: info@karldungsusa.com Ship all returns freight prepaid to: Karl Dungs Inc 3890 Pheasant Ridge Drive NE Suite 150 Blaine, MN

11 Dual Modular Valves Product Model Page Dual Modular Valves - DMV-D(LE) US 1.1 Dual Modular Valves with Vent Line Adapter - DMV-D(LE) US 2.1 Dual Modular Valves with Proof of losure -DMV-D(LE) US 3.1 Dual Modular Valves with Proof of losure & Visual Indicator DMV-D(LE) US 4.1 Dual Modular Valves with Proof of losure & Vent Line Adapter - DMV-D(LE) US 5.1 Dual Modular Valves NEMA Type 4x - DMV-D(LE) US 6.1 Dual Modular Valves NEMA Type 4x with Vent Line Adapter - DMV-D(LE) US 7.1 Dual Modular Valves NEMA Type 4x with Proof of losure - DMV-D(LE) US 8.1 Dual Modular Valves NEMA Type 4x with Proof of losure & Vent Line Adapter DMV-D(LE) US 9.1 Dual Modular Valves High apacity - DMV-D(LE) US/EU 10.1 Dual Modular Valves Flanged version DMV 5 /11 eco 602 US 11.1 Dual Modular Valves Flanged version with Proof of losure DMV 5 /11 eco US 12.1 Dual Modular Valves NEMA Type 4 Flanged version DMV 5 /11 eco 604 US 13.1 Dual Modular Valves NEMA Type 4 Flanged version with Proof of losure DMV 5 /11 eco US 14.1 Dual Modular Valves Flanged Versions - DMV-D(LE) 5XXX Series US/EU 15.1 Dual Modular Valves Flanged Versions - DMV-D(LE) 500XX Series EU 16.1 Dual Modular Valves Hazardous Location version- DMV-D(LE) US 17.1 Dual Modular Valves - DMV-D(LE) EU 18.1 Dual Modular Valves Two Stage - DMV-ZRD(LE) US 19.1 Dual Modular Valves Two Stage with Vent Line Adapter - DMV-ZRD(LE) US 20.1 Dual Modular Valves Two Stage with Proof of losure - DMV-ZRD(LE) US 21.1 Dual Modular Valves Two Stage with Proof of losure US 22.1 & Vent Line Adapter - DMV-ZRD(LE)

12 100 Dual Modular Valves - DMV-D(LE) Description The DUNGS Dual Modular Valve (DMV-D(LE)/602) combines two normally closed, automatic shutoff valves in one compact housing, which can be wired independently or in parallel. Valve 1 (V1) of the DMV-D and DMV-DLE series is fast opening and fast closing. Valve 2 (V2) of the DMV-D is fast opening, while V2 of the DMV-DLE is slow-opening for smoother light-off. Max. flow adjustment on V2 provides variable main flow on both models. Application Version The DMV/6 is recommended for industrial and commercial heating applications that require two safety shutoff valves in series. The DMV is suitable for natural gas, propane, butane, air and other inert gases. Optional Approvals When ordered and installed with Burkert connector plug (part number ), the UL Recognized DMV valve may replace a UL Listed valve. Such a substitution is typically required for equipment UL Listed to UL 295/UL 795. Harmonized ode: Specifications Body sizes Pipe size / thread Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV-D(LE) 701/602 DMV-D(LE) 702/602 DMV-D(LE) 703/602 1/2-1 NPT or Rp 1-2 NPT or Rp 1-2 NPT or Rp 7 PSI (500 mbar) UL, FM, 5 PSI (360 mbar) SA Vac/50-60 Hz 24 Vac/50-60 Hz; 24 Vdc NEMA Type 12 DIN-connector with 3/4 NPT conduit adapter 100 % duty cycle -40 F to +150 F (-40 to +65 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. Two visual indicators, (VI) or one PI 400 (PI) , and one VI meet this requirement. These also must be ordered separately. DMV-D 701/602 1/2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: A DMV-D 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: DMV-D 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: Products:

13 100 Dual Modular Valves - DMV-D(LE) DMV-D 701/ /2, 3/4, 1 NPT or Rp 24 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: DMV-D 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 24 Vac (+10%/-15%) Hz, 60 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: DMV-D 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 24 Vac (+10%/-15%) Hz, 80 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: DMV-D 701/ /2, 3/4, 1 NPT or Rp 24 Vdc (+10%/-15%) 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: DMV-D 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 24 Vdc (+10%/-15%) 65 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: DMV-D 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 24 Vdc (+10%/-15%) 80 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: DMV-DLE 701/ /2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: DMV-DLE 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: Products:

14 100 Dual Modular Valves - DMV-D(LE) DMV-DLE 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: DMV-DLE 701/ /2, 3/4, 1 NPT or Rp 24 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: DMV-DLE 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 24 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: DMV-DLE 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 24 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: DMV-DLE 701/ /2, 3/4, 1 NPT or Rp 24 Vdc (+10%/-15%) 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: DMV-DLE 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 24 Vdc (+10%/-15%) 65 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: DMV-DLE 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 24 Vdc (+10%/-15%) 80 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: Products:

15 100 Dual Modular Valves with Vent Line Adapter - DMV-D(LE) Description The DUNGS Dual Modular Valve with Vent Line Adapter (DMV-VLA) combines all the features of the DUNGS Dual Modular Valve with a factory installed vent line connection between the two automatic shutoff valves. For main gas lines: Up to 1 1/2 ; vent line must be 3/4 2 ; vent line must be 1 Version Application The DMV-VLA is recommended for industrial and commercial heating applications that require two safety shutoff valves in series with a vent line connection between the safety shutoff valves. The DMV-VLA is suitable for natural gas, propane, butane, air and other inert gases. Optional Approvals When ordered and installed with Burkert connector plug (part number ), the UL Recognized DMV valve may replace a UL Listed valve. Such a substitution is typically required for equipment UL Listed to UL 295/UL 795. Harmonized ode: Specifications Body sizes Pipe size / thread Vent Line onnection Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV 701/602 DMV 702/602 DMV 703/602 1/2-1 NPT or Rp 1-2 NPT or Rp 1-2 NPT or Rp 3/4 NPT 1 NPT 1 NPT 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA Vac/50-60 Hz 24 Vac/ Hz; 24 Vdc NEMA Type 12 DIN-connector with 1/2 NPT conduit adapter 100 % duty cycle -40 F to +150 F (-40 to +65 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. Two visual indicators, (VI) or one PI 400 (PI) , and one VI meet this requirement. These also must be ordered separately. DMV-D 701/602 with VLA 1/2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: V , B DMV-D 702/602 with VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: V 5.27 DMV-D 703/602 with VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: V 6.08 Products: 6 2.1

16 100 Dual Modular Valves with Vent Line Adapter - DMV-D(LE) DMV-DLE 701/602 with VLA , /2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: V 2.18 DMV-DLE 702/602 with VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: V 5.31 DMV-DLE 703/602 with VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: V 6.04 Products: 6 2.2

17 100 Dual Modular Valves with Proof of losure - DMV-D(LE) Description The DUNGS Dual Modular Valve (DMV-D(LE)/622) combines all the features of the DUNGS Dual Modular Valve DMV-D(LE)/6 plus valve 2 incorporates overtravel and a proof of closure switch which is factory mounted and set. Application The DUNGS DMV/622 is recommended for industrial and commercial heating applications that require two safety shutoff valves with valve 2 Incorporating overtravel and a proof of Version closure switch. The DMV/622 is suitable for natural gas, propane, butane, air and other inert gases. Optional Approvals When ordered and installed with Burkert connector plug (part number ), the UL Recognized DMV valve may replace a UL Listed valve. Such a substitution is typically required for equipment UL Listed to UL 295/UL 795. Harmonized ode: Specifications Body sizes Pipe size / thread Max. operating pressure Max. close off pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV 701/622 DMV 702/622 DMV 703/622 1/2-1 NPT or Rp 1-2 NPT or Rp 1-2 NPT or Rp 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA 10 PSI (700 mbar) UL, FM Vac/50-60 Hz 24 Vac/ Hz; 24 Vdc NEMA Type 12 DIN-connector with 1/2 NPT conduit adapter 100 % duty cycle -40 F to +150 F (-40 to +65 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. The visual indicator, (VI) meets this requirement. The visual indicator must be ordered separately for valve 1. Factory mounted and calibrated proof of closure switch: SPDT 10 A resistive, 8 FLA, Vac; NEMA type 4; - 40 F to +150 F (-40 to +65 ); Switch incorporates visual indication of valve (opened & closed). DMV-D 701/622 1/2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: P , A DMV-D 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: P 4.63 DMV-D 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: P A Products: 6 3.1

18 100 Dual Modular Valves with Proof of losure - DMV-D(LE) DMV-DLE 701/ , /2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: P 2.18 DMV-DLE 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: P 4.72 DMV-DLE 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: P 5.45 Products: 6 3.2

19 100 Dual Modular Valves with Proof of losure & Visual Indicator DMV D(LE) Description The DUNGS Dual Modular Valve (DMV-D(LE)/622) combines all the features of the DUNGS Dual Modular Valve DMV-D(LE)/6 plus valve 2 incorporates overtravel and a proof of closure switch which is factory mounted and set. The Visual Indicator (VI) ( A) is factory mounted to Valve 1 (V1) Application The DUNGS DMV/622 is recommended for industrial and commercial heating Version applications that require two safety shutoff valves with valve 2 incorporating overtravel and a proof of closure switch. The DMV/622 is suitable for natural gas, propane, butane, air and other inert gases. Optional Approvals When ordered and installed with Burkert connector plug (part number ), the UL Recognized DMV valve may replace a UL Listed valve. Such a substitution is typically required for equipment UL Listed to UL 295/UL 795. Harmonized ode: Harmonized ode: Specifications Body sizes Pipe size / thread Max. operating pressure Max. close off pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV 701/622 DMV 702/622 DMV 703/622 1/2-1 NPT or Rp 1-2 NPT or Rp 1-2 NPT or Rp 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA 10 PSI (700 mbar) UL, FM Vac/50-60 Hz 24 Vac/ Hz 24 Vdc NEMA Type 12 DIN-connector with 1/2 NPT conduit adapter 100 % duty cycle -40 F to +150 F (-40 to +65 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. The visual indicator, (VI) meets this requirement. Factory mounted and calibrated proof of closure switch: Factory mounted visual indicator: SPDT 10 A resistive, 8 FLA, Vac; NEMA type 4; - 40 F to +150 F (-40 to +65 ); Switch incorporates visual indication of valve (opened & closed). DMV-D 701/622 1/2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: PI , A DMV-D 702/ , , 1-1/4, 1-1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: PI 4.63 DMV-D 703/ , , 1-1/4, 1-1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: PI 5.36 Products: 6 4.1

20 100 Dual Modular Valves with Proof of losure & Visual Indicator DMV D(LE) DMV-DLE 701/ , /2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: PI 2.18 DMV-DLE 702/ , , 1-1/4, 1-1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: PI 4.72 DMV-DLE 703/ , , 1-1/4, 1-1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: A FORMERLY: PI 5.45 Products: 6 4.2

21 100 Dual Modular Valves with Proof of losure & Vent Line Adapter - DMV-D(LE) Description The DUNGS Dual Modular Valve (DMV-D(LE)/622) incorporates overtravel and a proof of closure switch which is factory mounted and set with a Vent Line Adapter (VLA) that is also factory installed. For main gas lines: Up to 1 1/2 ; vent line must be 3/4 2 ; vent line must be 1 Version Application The DMV-VLA is recommended for industrial and commercial heating applications that require two safety shutoff valves with valve 2 Incorporating overtravel and a proof of closure switch and a vent line connection between the safety shutoff valves. The DMV-D(LE) is suitable for natural gas, propane, butane, air and other inert gases. Optional Approvals When ordered and installed with Burkert connector plug (part number ), the UL Recognized DMV valve may replace a UL Listed valve. Such a substitution is typically required for equipment UL Listed to UL 295/UL 795. Harmonized ode: Specifications Body sizes Pipe size / thread Vent Line onnection Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV 701/622 DMV 702/622 DMV 703/622 1/2-1 NPT or Rp 1-2 NPT or Rp 1-2 NPT or Rp 3/4 NPT 1 NPT 1 NPT 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA Vac/50-60 Hz 24 Vac/ Hz; 24 Vdc NEMA Type 12 DIN-connector with 1/2 NPT conduit adapter 100 % duty cycle -40 F to +150 F (-40 to +65 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. The visual indicator, (VI) meets this requirement. The visual indicator must be ordered separately for valve 1. Factory mounted and calibrated proof of closure switch: SPDT 10 A resistive, 8 FLA, Vac; NEMA type 4; - 40 F to +150 F (-40 to +65 ); Switch incorporates visual indication of valve (opened & closed). DMV-D 701/622 with VLA 3/4,1/2, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: VP , B DMV-D 702/622 W/VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: VP 4.86 DMV-D 703/622 with VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: VP 5.58 Products: 6 5.1

22 100 Dual Modular Valves with Proof of losure & Vent Line Adapter - DMV-D(LE) DMV-DLE 701/622 with VLA , /4,1/2, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 45 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: VP 2.36 DMV-DLE 702/622 with VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: VP 4.90 DMV-DLE 703/622 with VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: B FORMERLY: VP 5.63 Products: 6 5.2

23 102 Dual Modular Valves NEMA Type 4x - DMV-D(LE) Description The DUNGS Dual Modular Valve (DMV-D(LE)/604) combines two normally closed, automatic shutoff valves in one compact housing (Rated as a NEMA Type 4x enclosure), which can be wired independently or in parallel. Valve 1 (V1) of the DMV-D and DMV-DLE series is fast opening and fast closing. Valve 2 (V2) of the DMV-D is fast opening, while V2 of the DMV- DLE is slow-opening for smoother light-off. Max. flow adjustment on V2 provides variable main flow on both models. Version Application The DUNGS DMV-D(LE)/604 is recommended for industrial and commercial heating applications that require two safety shutoff valves in series with a NEMA Type 4x enclosure. The (DMV-D(LE)/604) is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Body sizes Pipe size / thread Max. operating pressure Max. close off pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV-D(LE) 702/604 & DMV-D(LE) 703/604 DMV-D(LE) 704/ NPT or Rp 2 NPT or Rp 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA 10 PSI (700 mbar) UL, FM Vac/50-60 Hz NEMA Type 4x Screw terminals with 1/2" NPT conduit connection 100 % duty cycle -20 F to +140 F (-30 to +60 ) (704) +5 F to +140 F (-15 to +60 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. Flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. Two visual indicators, (VI) or one PI 400 (PI) , and one VI meet this requirement. These also must be ordered separately. DMV-D 702/604L 1, 1 1/4, 1 1/2, 2 NPT or Rp O 120 Vac (+10%/-15%) Hz, 60 VA, NEMA Type 4x Replaced by FORMERLY: PRIE ON REQUEST DMV-D 703/604L , 1 1/4, 1 1/2, 2 NPT or Rp O 120 Vac (+10%/-15%) Hz, 80 VA, NEMA Type 4x Replaced by FORMERLY: PRIE ON REQUEST DMV-D 704/ NPT or Rp O 120 Vac (+10%/-15%) Hz, 110 VA, NEMA Type 4X; SA APPROVED ONLY Replaced by FORMERLY: PRIE ON REQUEST Products: 6 6.1

24 102 Dual Modular Valves NEMA Type 4x - DMV-D(LE) DMV-DLE 702/604L 1, 1 1/4, 1 1/2, 2 NPT or Rp O 120 Vac (+10%/-15%) Hz, 60 VA, NEMA Type 4x Replaced by FORMERLY: PRIE ON REQUEST DMV-DLE 703/604L , 1 1/4, 1 1/2, 2 NPT or Rp O 120 Vac (+10%/-15%) Hz, 80 VA, NEMA Type 4x Replaced by FORMERLY: PRIE ON REQUEST DMV-DLE 704/604 2 NPT or Rp O 120 Vac (+10%/-15%) Hz, 110 VA, NEMA Type 4X; SA APPROVED ONLY Replaced by FORMERLY: PRIE ON REQUEST Products: 6 6.2

25 102 Dual Modular Valves NEMA Type 4x with Vent Line Adapter - DMV-D(LE) Description The DUNGS Dual Modular Valve (DMV-D(LE)/624) with a Vent Line Adapter (VLA) that is factory installed. For main gas lines: Up to 1 1/2 ; vent line must be 3/4 2 ; vent line must be 1 Application Version The DUNGS DMV-D(LE)/604 is recommended for industrial and commercial heating applications that require two safety shutoff valves in series with a vent line connection between the safety shutoff valves and NEMA Type 4x enclosure. The DMV-D(LE)/604 is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Body sizes Pipe size / thread Vent Line onnection Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV 702/604 DMV 703/ NPT or Rp 1-2 NPT or Rp 1 NPT 1 NPT 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA Vac/50-60 Hz 24 Vac/ Hz; 24 Vdc NEMA Type 4x Screw terminals with 1/2" NPT conduit connection 100 % duty cycle -20 F to +140 F (-30 to +60 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. Flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. Two visual indicators, (VI) or one PI 400 (PI) , and one VI meet this requirement. These also must be ordered separately. DMV-D 702/604L with VLA 1, 1 1/4, 1 1/2, 2 NPT or Rp O 120 Vac (+10%/-15%) Hz, 60 VA, NEMA Type 4x Replaced by FORMERLY: V PRIE ON REQUEST DMV-D 703/604L with VLA 1, 1 1/4, 1 1/2, 2 NPT or Rp O 120 Vac (+10%/-15%) Hz, 80 VA, NEMA Type 4x Replaced by Replaced by FORMERLY: V PRIE ON REQUEST DMV-DLE 702/604L with VLA , 1 1/4, 1 1/2, 2 NPT or Rp O 120 Vac (+10%/-15%) Hz, 60 VA, NEMA Type 4x Replaced by FORMERLY: V PRIE ON REQUEST Products: 4 7.1

26 102 Dual Modular Valves NEMA Type 4x with Vent Line Adapter - DMV-D(LE) DMV-DLE 703/604L with VLA 1, 1 1/4, 1 1/2, 2 NPT or Rp O 120 Vac (+10%/-15%) Hz, 80 VA, NEMA Type 4x Replaced by FORMERLY: V PRIE ON REQUEST Products: 4 7.2

27 102 Dual Modular Valves NEMA Type 4 with Proof of losure - DMV-D(LE) Description The DUNGS Dual Modular Valve (DMV-D(LE)/624; 634) with Proof of losure combines all the features of the DUNGS Dual Modular Valve DMV/604 plus overtravel and a proof of closure switch which is factory mounted and set. Application The DUNGS DMV/624;634 is recommended for industrial and commercial heating applications that require two safety shutoff valves in series where the application requires Version overtravel and a proof of closure switch(s) and NEMA Type 4x enclosure. The DMV-D(LE) /624;634 is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Body sizes Pipe size / thread Max. operating pressure Max. close off pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV-D(LE) 702/624 & DMV-D(LE) 703/624 DMV-D(LE) 704/624; NPT or Rp 2 NPT or Rp 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA 10 PSI (700 mbar) UL, FM Vac/50-60 Hz NEMA Type 4 Screw terminals with 1/2" NPT conduit connection 100 % duty cycle -20 F to +140 F (-30 to +60 ) (704) +5 F to +140 F (-15 to +60 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. Includes 1 PO switch. Flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. The visual indicator, (VI) meets this requirement. The visual indicator must be ordered separately for valve 1. Factory mounted and calibrated proof of closure switch: SPDT 10 A resistive, 8 FLA, Vac; NEMA type 4; - 40 F to +150 F (-40 to +65 ); Switch incorporates visual indication of valve (opened & closed). DMV-D 702/624L 1, 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 4 REPLAEMENT OIL (SOLD INDIVIDUAL): FORMERLY: P , B DMV-D 703/624L , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 4 REPLAEMENT OIL (SOLD INDIVIDUAL): B FORMERLY: P 5.40 DMV-D 704/ , NPT or Rp 120 Vac (+10%/-15%) Hz, 110 VA, NEMA Type 4; PO on Valve 2 ONLY; SA APPROVED ONLY REPLAEMENT OIL (SOLD INDIVIDUAL): B FORMERLY: P Products: 8 8.1

28 102 Dual Modular Valves NEMA Type 4 with Proof of losure - DMV-D(LE) DMV-D 704/ , NPT or Rp 120 Vac (+10%/-15%) Hz, 110 VA, NEMA Type 4; PO on BOTH Valves; SA APPROVED ONLY REPLAEMENT OIL (SOLD INDIVIDUAL): B FORMERLY: PP DMV-DLE 702/624L , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 65 VA, NEMA Type 4 REPLAEMENT OIL (SOLD INDIVIDUAL): B FORMERLY: P 4.72 DMV-DLE 703/624L , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 90 VA, NEMA Type 4 REPLAEMENT OIL (SOLD INDIVIDUAL): B FORMERLY: P 5.45 DMV-DLE 704/ , NPT or Rp 120 Vac (+10%/-15%) Hz, 110 VA, NEMA Type 4; PO on Valve 2 ONLY; SA APPROVED ONLY REPLAEMENT OIL (SOLD INDIVIDUAL): B FORMERLY: P DMV-DLE 704/ , NPT or Rp 120 Vac (+10%/-15%) Hz, 110 VA, NEMA Type 4; PO on BOTH Valves; SA APPROVED ONLY REPLAEMENT OIL (SOLD INDIVIDUAL): B FORMERLY: PP Products: 8 8.2

29 102 Dual Modular Valves NEMA Type 4 with Proof of losure & Vent Line Adapter - DMV-D(LE) Description The DUNGS Dual Modular Valve (DMV-D(LE)/622) incorporates overtravel and a proof of closure switch which is factory mounted and set with a Vent Line Adapter (VLA) that is also factory installed. For main gas lines: Up to 1 1/2 ; vent line must be 3/4 2 ; vent line must be 1 Version Application The DMV-VLA is recommended for industrial and commercial heating applications that require two safety shutoff valves with valve 2 Incorporating overtravel and a proof of closure switch with a vent line connection between the safety shutoff valves and NEMA Type 4x enclosure. The DMV-D(LE)/624 is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Body sizes Pipe size / thread Vent Line onnection Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV 702/624 DMV 703/ NPT or Rp 1-2 NPT or Rp 1 NPT 1 NPT 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA Vac/50-60 Hz NEMA Type 4 Screw terminals with 1/2" NPT conduit connection 100 % duty cycle -20 F to +140 F (-30 to +60 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. Includes 1 PO switch. Flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. The visual indicator, (VI) meets this requirement. The visual indicator must be ordered separately for valve 1. Factory mounted and calibrated proof of closure switch: SPDT 10 A resistive, 8 FLA, Vac; NEMA type 4; - 40 F to +150 F (-40 to +65 ); Switch incorporates visual indication of valve (opened & closed). DMV-D 702/624L with VLA 1, 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 60 VA, NEMA Type 4 REPLAEMENT OIL (SOLD INDIVIDUAL): FORMERLY: VP , B DMV-D 703/624L with VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 80 VA, NEMA Type 4 REPLAEMENT OIL (SOLD INDIVIDUAL): B FORMERLY: VP 5.68 DMV-DLE 702/624L with VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 60 VA, NEMA Type 4 REPLAEMENT OIL (SOLD INDIVIDUAL): B FORMERLY: VP 4.99 Products: 4 9.1

30 102 Dual Modular Valves NEMA Type 4 with Proof of losure & Vent Line Adapter - DMV-D(LE) DMV-DLE 703/624L with VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 80 VA, NEMA Type 4 REPLAEMENT OIL (SOLD INDIVIDUAL): B FORMERLY: VP 5.72 Products: 4 9.2

31 103 Dual Modular Valves High apacity - DMV-D(LE) Description The DUNGS Dual Modular Valve (DMV) combines two normally closed, automatic shutoff valves in one compact housing, which can be wired independently or in parallel. Valve 1 (V1) of the DMV, DMV-D, and DMV-DLE series is fast opening and fast closing. Valve 2 (V2) of the DMV-D is fast opening, while V2 of the DMV-DLE is slow-opening for smoother light-off. Max. flow adjustment on V1 provides variable main flow on the DMV-D and DMV-DLE models. Application Version The DMV/11 is recommended for industrial and commercial heating applications that require two safety shutoff valves in series. The DMV is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Pipe size Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart 2 NPT or Rp 7 PSI (500 mbar) FM, E (lass A) 5 PSI (360 mbar) SA Vac/50-60 Hz; Vac/50-60 Hz 24 Vac/ Hz; 24 Vdc NEMA Type 12 DIN-connector with 1/2 NPT conduit adapter 100 % duty cycle +5 F to +140 F (-15 to +60 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV, DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on DMV-D and DMV-DLE feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. A combination of visual indicators, (VI) and PI 400 s (PI) , meet this requirement. These also must be ordered separately. DMV-D 525/11 2 NPT or Rp 110 Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: , DMV-D 525/ , NPT or Rp 220 Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: DMV-D 525/ , NPT or Rp 24 Vdc (+10%/-15%), 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: Products:

32 103 Dual Modular Valves High apacity - DMV-D(LE) DMV-DLE 525/11 2 NPT or Rp 110 Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: , DMV-DLE 525/ , NPT or Rp 220 Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: DMV-DLE 525/ , NPT or Rp 24 Vdc (+10%/-15%), 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB: FORMERLY: Products:

33 103 Dual Modular Valves Flanged version DMV 5 /11 eco 602 Description The DUNGS DMV 5 /11 eco 602 valve combines two normally closed, automatic shutoff valves in one compact housing, which can be wired independently or in parallel. Valve 1 (V1) of the DMV eco, and DMV-DLE eco series is fast opening and fast closing. Valve 2 (V2) of the DMV eco is fast opening, while V2 of the DMV-DLE eco is slow opening for smoother start-up conditions. Max. flow adjustment on V2 provides variable main flow on both models. Version Application The DMV 5 /11 eco 602 valve is recommended for industrial and commercial gas consuming applications that require two safety shutoff valves in series. The DMV 5 /11 eco 602 valve is suitable for natural gas, propane, butane, air and other inert gases. Viton version is suitable for corrosive gases up to 100% Humidity and 1% H2S (ontact Dungs for more details). Link to the User Manual Harmonized ode: Specifications Pipe size Max. Operating Pressure Electrical Ratings (+10% / -15%) Enclosure Rating Electrical onnection Operating Time Ambient Temperature Rating MA state listed G AGA/GOST PENDING DN 65 to DN 125 (2½ -5 ) 7 PSI (500mbar) FM, SA, E Vac/ Hz Vac/ Hz 24 Vdc Start/Hold power consumption with all coils energized DMV (-DLE) 5065 eco 6X2 = 130/32VA DMV (-DLE) 5080 eco 6X2 = 190/40VA DMV (-DLE) 5100/5125 eco 6X2 = 250/50VA NEMA Type 12/IP54 DIN-connector with ½ NPT conduit adaptor 100% duty cycle NBR Seat +5 o F to +140 o F (-15 o to +60 o ) Viton seat SA +5 o F to +140 o F (-15 o to +60 o ) Viton seat EN o F to +140 o F (0 o to +60 o ) Aluminum Body; Inlet, intermediate and outlet side taps (G 1/8 ISO 228); inlet gas strainer installed in the housing upstream V1 (23 mesh screen); DMV eco V1 Fast Opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE eco - V1 fast opening & closing (<1s), V2 slow opening 20s 70F & fast closing (<1s); V2 on DMV-DLE eco features a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671); Din connector (210319), and ISO mating flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1 and larger safety valves. Two visual indicators, (VI) or one PI 400 (PI) , and one VI meet this requirement. These also must be ordered separately. DMV 5065/11 eco 602 DN. 65 to ISO PN Vac Hz NEMA Type 12 Replacement oil FORMERLY: NP DMV 5080/602 eco DN. 80 to ISO PN16 DN 80 PN 16 Dual SSOV NBR SA E NEMA 12 Spare oil 1511/2P FORMERLY: NP DMV 5100/602 eco DN. 100 to ISO PN16 DN100 PN 16 Dual SSOV NBR SA E NEMA 12 Spare oil 1611/2P FORMERLY: NP , NP , NP , NP Products:

34 103 Dual Modular Valves Flanged version DMV 5 /11 eco 602 DMV 5125/11 eco 602 DN. 125 to ISO PN VA Hz Replacement oil FORMERLY: NP DMV 5065/11 eco 602 DN. 65 to ISO PN16 24 Vdc Replacement oil DMV 5080/11 eco 602 DN. 80 to ISO PN16 24 Vdc Replacement oil DMV 5100/11 eco 602 DN. 100 to ISO PN16 24 Vdc Replacement oil DMV 5125/11 eco 602 DN. 125 to ISO PN16 24 Vdc Replacement oil DMV 5080/11 eco 602 DN. 80 to ISO PN16 24 Vdc Viton Seat Replacement oil DMV 5100/11 eco 602 DN. 100 to ISO PN16 24 Vdc Viton Seat Replacement oil DMV 5125/11 eco 602 DN. 125 to ISO PN16 24 Vdc Viton Seat Replacement oil , NP NP 2, NP NP 3, NP NP 4, NP NP 6, NP NP 4, NP NP 5, NP NP 7, NP Products:

35 103 Dual Modular Valves Flanged version DMV 5 /11 eco 602 DMV-DLE 5065/11 eco 602 DN. 65 to ISO PN Vac Hz Replacement oil DMV-DLE 5080/11 eco 602 DN. 80 to ISO PN Vac Hz Replacement oil DMV-DLE 5100/11 eco 602 DN. 100 to ISO PN VA Hz Replacement oil DMV-DLE 5125/11 eco 602 DN. 125 to ISO PN VA Hz Replacement oil NP 2, NP NP 3, NP NP 4, NP NP 7, NP Products:

36 103 Dual Modular Valves Flanged version with Proof of losure DMV 5 /11 eco Description The DUNGS Flanged Dual Modular Valve (DMV 5 /11 eco/622; 632) combines all the features of the DUNGS DMV 5 /11 eco 602 valve plus overtravel and a proof of closure (PO) switch which is factory mounted and set on V2 for the /622 and on both valves for the /632. Application Version The DMV 5 /11 eco 622; 632 is recommended for industrial and commercial gas consuming applications that require two safety shutoff valves in series. The DMV 5 /11 eco 622; 632 DMV is suitable for natural gas, propane, butane, air and other inert gases. Viton version is suitable for corrosive gases up to 100% Humidity and 1% H2S (ontact Dungs for more details). Link to the User Manual Harmonized ode: Specifications Pipe size Max. Operating Pressure Enclosure Rating Electrical onnection Operating Time Ambient Temperature Rating MA state listed G AGA/GOST PENDING DN 65 to DN 125 (2½ -5 ) 7 PSI (500mbar) FM, SA, E Electrical Ratings (+10% / -15%) Vac/ Hz Vac/ Hz 24 Vdc Start/Hold power consumption with all coils energized DMV (-DLE) 5065 eco 6X2 = 130/32VA DMV (-DLE) 5080 eco 6X2 = 190/40VA DMV (-DLE) 5100/5125 eco 6X2 = 250/50VA NEMA Type 12/ IP54 DIN-connector with ½ NPT conduit adaptor 100% duty cycle NBR Seat +5 o F to +140 o F (-15 o to +60 o ) Viton seat SA +5 o F to +140 o F (-15 o to +60 o ) Viton seat EN o F to +140 o F (0 o to +60 o ) Aluminum Body; Inlet, intermediate and outlet side taps (G 1/8 ISO 228); inlet gas strainer installed in the housing upstream V1 (23 mesh screen); DMV eco V1 Fast Opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE eco - V1 fast opening & closing (<1s), V2 slow opening 20s 70F & fast closing (<1s); V2 on DMV-DLE eco features a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. eco/622 has PO mounted to V2, eco/632 has PO mounted to V1 and V2 onduit Adapter (240671); Din connector (210319), and ISO mating flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1 and larger safety valves. Two visual indicators, (VI) or one PI 400 (PI) , and one VI meet this requirement. These also must be ordered separately for V1 for the eco/622 valve. Factory mounted and calibrated proof of closure switch: SPDT 5 A resistive, 2 FLA, Vac; 24 VD; NEMA type 12; +5 o F to +140 o F (-15 o to +60 o ); Switch incorporates visual indication of valve (opened & closed). DMV 5065/11 eco 622 DN. 65 to ISO PN Vac Hz Replacement oil FORMERLY: P DMV 5080/11 eco 622 DN. 80 to ISO PN Vac Hz Replacement oil DMV 5100/11 eco 622 DN. 100 to ISO PN Vac Hz Replacement oil FORMERLY: P , NP P 3, NP , NP Products:

37 103 Dual Modular Valves Flanged version with Proof of losure DMV 5 /11 eco DMV 5125/11 eco 622 DN. 125 to ISO PN Vac Hz Replacement oil FORMERLY: P DMV 5065/11 eco 622 DN. 65 to ISO PN16 24 Vdc Replacement oil FORMERLY: P DMV 5080/11 eco 622 DN. 80 to ISO PN16 24 Vdc Replacement oil FORMERLY: P DMV 5100/11 eco 622 DN. 100 to ISO PN16 24 Vdc Replacement oil FORMERLY: P DMV 5125/11 eco 622 DN. 125 to ISO PN16 24 Vdc Replacement oil DMV 5080/11 eco 622 DN. 80 to ISO PN16 24 Vdc Viton Seat Replacement oil FORMERLY: P DMV 5100/11 eco 622 DN. 100 to ISO PN16 24 Vdc Viton Seat Replacement oil FORMERLY: P DMV 5125/11 eco 622 DN. 125 to ISO PN16 24 Vdc Viton Seat Replacement oil FORMERLY: P , NP , NP , NP , NP P 8, NP , NP , NP , NP Products:

38 103 Dual Modular Valves Flanged version with Proof of losure DMV 5 /11 eco DMV 5065/11 eco 632 DN. 65 to ISO PN Vac Hz Replacement oil DMV 5080/11 eco 632 DN. 80 to ISO PN Vac Hz Replacement oil FORMERLY: PP DMV 5100/11 eco 632 DN. 100 to ISO PN Vac Hz Replacement oil FORMERLY: PP DMV 5125/11 eco 632 DN. 125 to ISO PN Vac Hz Replacement oil FORMERLY: PP DMV 5065/11 eco 632 DN. 65 to ISO PN16 24 Vdc Replacement oil DMV 5080/11 eco 632 DN. 80 to ISO PN16 24 Vdc Replacement oil DMV 5100/11 eco 632 DN. 100 to ISO PN16 24 Vdc Replacement oil DMV 5125/11 eco 632 DN. 125 to ISO PN16 24 Vdc Replacement oil PP 3, NP , NP , NP , NP PP 3, NP PP 4, NP PP 5, NP PP 8, NP Products:

39 103 Dual Modular Valves Flanged version with Proof of losure DMV 5 /11 eco DMV 5080/11 eco 632 DN. 80 to ISO PN16 24 Vdc Viton Seat Replacement oil DMV 5100/11 eco 632 DN. 100 to ISO PN16 24 Vdc Viton Seat Replacement oil DMV 5125/11 eco 632 DN. 125 to ISO PN16 24 Vdc Viton Seat Replacement oil DMV-DLE 5065/11 eco 622 DN. 65 to ISO PN Vac Hz Replacement oil FORMERLY: P DMV-DLE 5080/11 eco 622 DN. 80 to ISO PN Vac Hz Replacement oil FORMERLY: P DMV-DLE 5100/11 eco 622 DN. 100 to ISO PN Vac Hz Replacement oil FORMERLY: P DMV-DLE 5125/11 eco 622 DN. 125 to ISO PN Vac Hz Replacement oil FORMERLY: P DMV-DLE 5065/11 eco 632 DN. 65 to ISO PN Vac Hz Replacement oil FORMERLY: PP PP 4, NP PP 6, NP PP 9, NP , NP , NP , NP , NP , NP Products:

40 103 Dual Modular Valves Flanged version with Proof of losure DMV 5 /11 eco DMV-DLE 5080/11 eco 632 DN. 80 to ISO PN Vac Hz Replacement oil DMV-DLE 5100/11 eco 632 DN. 100 to ISO PN Vac Hz Replacement oil DMV-DLE 5125/11 eco 632 DN. 125 to ISO PN Vac Hz Replacement oil PP 4, NP PP 5, NP PP 8, NP Products:

41 103 Dual Modular Valves NEMA Type 4 Flanged version DMV 5 /11 eco 604 Description The DUNGS DMV 5 /11 eco 604 valve combines two normally closed, automatic shutoff valves in one compact housing, which can be wired independently or in parallel. Valve 1 (V1) of the DMV eco, and DMV-DLE eco series is fast opening and fast closing. Valve 2 (V2) of the DMV eco is fast opening, while V2 of the DMV-DLE eco is slow opening for start-up conditions.. Max. flow adjustment on V2 provides variable main flow on both models. Version Application The DMV 5 /11 eco 604 valve is recommended for industrial and commercial gas consuming applications that require two safety shutoff valves in series. The DMV 5 /11 eco 604 valve is suitable for natural gas, propane, butane, air and other inert gases. Viton version is suitable for corrosive gases up to 100% Humidity and 1% H2S (ontact Dungs for more details). Link to the User Manual Harmonized ode: Specifications Pipe size Max. Operating Pressure Electrical Ratings (+10% / -15%) Enclosure Rating Electrical onnection Operating Time Ambient Temperature Rating MA state listed G AGA/GOST PENDING DN 65 to DN 125 (2½ -5 ) 7 PSI (500mbar) FM, SA, E Vac/ Hz Vac/ Hz 24 Vdc Start/Hold power consumption with all coils energized DMV (-DLE) 5065 eco 6X4 = 130/32VA DMV (-DLE) 5080 eco 6X4 = 190/40VA DMV (-DLE) 5100/5125 eco 6X4 = 250/50VA NEMA Type 4/ IP65 DIN-connector with ½ NPT conduit adaptor 100% duty cycle NBR Seat +5 o F to +140 o F (-15 o to +60 o ) Viton seat SA +5 o F to +140 o F (-15 o to +60 o ) Viton seat EN o F to +140 o F (0 o to +60 o ) Aluminum Body; Inlet, intermediate and outlet side taps (G 1/8 ISO 228); inlet gas strainer installed in the housing upstream V1 (23 mesh screen); DMV eco V1 Fast Opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE eco - V1 fast opening & closing (<1s), V2 slow opening 20s 70F & fast closing (<1s); V2 on DMV-DLE eco features a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671); Din connector (210319), and mating ISO flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1 and larger safety valves. Two visual indicators, (VI) or one PI 400 (PI) , and one VI meet this requirement. These also must be ordered separately. DMV 5065/11 eco 604 DN. 65 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA NP-4 DMV 5080/11 eco 604 DN. 80 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA NP-4 DMV 5100/11 eco 604 DN. 100 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA NP , NP , NP , NP Products:

42 103 Dual Modular Valves NEMA Type 4 Flanged version DMV 5 /11 eco 604 DMV 5125/11 eco 604 DN. 125 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA NP-4 DMV 5065/11 eco 604 DN. 65 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this valve , NP NP 2, NP DMV 5080/11 eco 604 DN. 80 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this valve FORMERLY: GA NP-4 DMV 5100/11 eco 604 DN. 100 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this valve FORMERLY: GA NP-4 DMV 5125/11 eco 604 DN. 125 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this valve FORMERLY: GA NP-4 DMV-DLE 5065/11 eco 604 DN. 65 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA NP-4 DMV-DLE 5080/11 eco 604 DN. 80 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA NP-4 DMV-DLE 5100/11 eco 604 DN. 100 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA NP , NP , NP , NP , NP , NP , NP Products:

43 103 Dual Modular Valves NEMA Type 4 Flanged version DMV 5 /11 eco 604 DMV-DLE 5125/11 eco 604 DN. 125 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA NP , NP Products:

44 103 Dual Modular Valves NEMA Type 4 Flanged version with Proof of losure DMV 5 /11 eco Description The DUNGS Flanged Dual Modular Valve (DMV 5 /11 eco/624; 634) combines all the features of the DUNGS DMV 5 /11 eco 604 valve plus overtravel and a proof of closure switch which is factory mounted and set on V2 for the /622 and on both valves for /632 Application The DMV 5 /11 eco 624; 634 is recommended for industrial and commercial gas consuming Version applications that require two safety shutoff valves in series. The DMV 5 /11 eco 624; 634 is suitable for natural gas, propane, butane, air and other inert gases. Viton version is suitable for corrosive gases up to 100% Humidity and 1% H2S (ontact Dungs for more details). Link to the User Manual Harmonized ode: Specifications Pipe size Max. Operating Pressure Electrical Ratings (+10% / -15%) Enclosure Rating Electrical onnection Operating Time Ambient Temperature Rating MA state listed G AGA/GOST PENDING DN 65 to DN 125 (2½ -5 ) 7 PSI (500mbar) FM, SA, E Vac/ Hz Vac/ Hz 24 Vdc Start/Hold power consumption with all coils energized DMV (-DLE) 5065 eco 6X4 = 130/32VA DMV (-DLE) 5080 eco 6X4 = 190/40VA DMV (-DLE) 5100/5125 eco 6X4 = 250/50VA NEMA Type 4/ IP65 DIN-connector with ½ NPT conduit adaptor 100% duty cycle NBR Seat +5 o F to +140 o F (-15 o to +60 o ) Viton seat SA +5 o F to +140 o F (-15 o to +60 o ) Viton seat EN o F to +140 o F (0 o to +60 o ) Aluminum Body; Inlet, intermediate and outlet side taps (G 1/8 ISO 228); inlet gas strainer installed in the housing upstream V1 (23 mesh screen); DMV eco, V1 Fast Opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE eco - V1 fast opening & closing (<1s), V2 slow opening 20s 70F & fast closing (<1s); V2 on DMV-DLE eco features a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. eco/624 has PO mounted to V2, eco/634 has PO mounted to V1 and V2 onduit Adapter (240671); Din connector (210319), and ISO mating flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1 and larger safety valves. Two visual indicators, (VI) or one PI 400 (PI) , and one VI meet this requirement. These also must be ordered separately for valve 1. Factory mounted and calibrated proof of closure switch: SPDT 5 A resistive, 2 FLA, Vac; 24 VD; NEMA type 4; +5 o F to +140 o F (-15 o to +60 o ); Switch incorporates visual indication of valve (opened & closed). DMV 5065/11 eco 624 DN. 65 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P-4 DMV 5080/11 eco 624 DN. 80 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P-4 DMV 5100/11 eco 624 DN. 100 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P , NP , NP , NP Products:

45 103 Dual Modular Valves NEMA Type 4 Flanged version with Proof of losure DMV 5 /11 eco DMV 5125/11 eco , DN. 125 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P-4 NP DMV 5065/11 eco , DN. 65 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P-4 NP DMV 5080/11 eco , DN. 80 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P-4 NP DMV 5100/11 eco , DN. 100 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P-4 NP DMV 5125/11 eco , DN. 125 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P-4 NP DMV 5065/11 eco , DN. 65 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA PP-4 NP DMV 5080/11 eco , DN. 80 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA PP-4 NP DMV 5100/11 eco , DN. 100 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA PP-4 NP Products:

46 103 Dual Modular Valves NEMA Type 4 Flanged version with Proof of losure DMV 5 /11 eco DMV 5125/11 eco 634 DN. 125 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA PP-4 DMV 5065/11 eco 634 DN. 65 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this valve DMV 5080/11 eco 634 DN. 80 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this valve FORMERLY: GA PP-4 DMV 5100/11 eco 634 DN. 100 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this valve FORMERLY: GA PP-4 DMV 5125/11 eco 634 DN. 125 to ISO PN16 24 Vdc Replacement oil PB Board is not replaceable on this FORMERLY: GA PP-4 DMV-DLE 5065/11 eco 624 DN. 65 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P-4 DMV-DLE 5080/11 eco 624 DN. 80 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P , NP GA PP 3, NP , NP , NP , NP , NP , NP DMV-DLE 5100/11 eco , DN. 100 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P-4 NP Products:

47 103 Dual Modular Valves NEMA Type 4 Flanged version with Proof of losure DMV 5 /11 eco DMV-DLE 5125/11 eco , DN. 125 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA P-4 NP DMV-DLE 5065/11 eco , DN. 65 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA PP-4 NP DMV-DLE 5080/11 eco , DN. 80 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA PP-4 NP DMV-DLE 5100/11 eco , DN. 100 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA PP-4 NP DMV-DLE 5125/11 eco , DN. 125 to ISO PN Vac Hz Replacement oil PB Board is not replaceable on this valve FORMERLY: GA PP-4 NP Products:

48 103 Dual Modular Valves Flanged version - DMV-D(LE) 5XXX Series Description The DUNGS Flanged Dual Modular Valve (DMV) combines two normally closed, automatic shutoff valves in one compact housing, which can be wired independently or in parallel. Valve 1 (V1) of the DMV, DMV-D and DMV-DLE series is fast opening and fast closing. Valve 2 (V2) of the DMV and DMV-D is fast opening, while V2 of the DMV-DLE is slow-opening for smoother light-off. Max. flow adjustment on V1 provides variable main flow on the DMV-D and DMV-DLE models. Version Application The DMV/11 is recommended for industrial and commercial heating applications that require two safety shutoff valves in series. The DMV is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Pipe size Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DN 40 to DN 125 (1-1/2-5 ) 7 PSI (500 mbar) FM, E (lass A) 5 PSI (360 mbar) SA Vac/50-60 Hz; Vac/50-60 Hz 24 Vac/ Hz; 24 Vdc NEMA Type 12 DIN-connector with 1/2 NPT conduit adapter 100 % duty cycle +5 F to +140 F (-15 to +60 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV, DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on DMV-D and DMV-DLE feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. Two visual indicators, (VI) or one PI 400 (PI) , and one VI meet this requirement. These also must be ordered separately. DMV-D 5050/11 DN. 50 to ISO PN Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: , DMV-D 5040/ , DN. 40 to ISO PN Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-D 5050/ , DN. 50 to ISO PN Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: Products:

49 103 Dual Modular Valves Flanged version - DMV-D(LE) 5XXX Series DMV-DLE 5050/ , DN. 50 to ISO PN Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-D 5040/ , DN. 40 to ISO PN40 24 Vdc (+10%/-15%), 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-D 5050/ , DN. 50 to ISO PN40 24 Vdc (+10%/-15%), 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-DLE 5050/ , DN. 50 to ISO PN Vac (+10%/-15%) Hz, 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-D 5065/ , DN. 65 to ISO PN Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-D 5080/ , DN. 80 to ISO PN Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-D 5100/ , DN. 100 to ISO PN Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-D 5125/ , DN. 125 to ISO PN Vac (+10%/-15%) Hz, 200 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: Products:

50 103 Dual Modular Valves Flanged version - DMV-D(LE) 5XXX Series DMV-D 5065/ , DN. 65 to ISO PN Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: DMV-D 5080/ , DN. 80 to ISO PN Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-D 5100/ , DN. 100 to ISO PN Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: DMV-D 5125/ , DN. 125 to ISO PN Vac (+10%/-15%) Hz, 200 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: DMV-D 5065/ , DN. 65 to ISO PN16 24 Vdc (+10%/-15%), 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-D 5080/ , DN. 80 to ISO PN16 24 Vdc (+10%/-15%), 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-D 5100/ , DN. 100 to ISO PN16 24 Vdc (+10%/-15%), 135 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-D 5125/ , DN. 125 to ISO PN16 24 Vdc (+10%/-15%), 200 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: Products:

51 103 Dual Modular Valves Flanged version - DMV-D(LE) 5XXX Series DMV-DLE 5065/ , DN. 65 to ISO PN Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-DLE 5080/ , DN. 80 to ISO PN Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-DLE 5100/ , DN. 100 to ISO PN Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-DLE 5125/ , DN. 125 to ISO PN Vac (+10%/-15%) Hz, 200 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-DLE 5065/ , DN. 65 to ISO PN Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-DLE 5080/ , DN. 80 to ISO PN Vac (+10%/-15%) Hz, 110 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: DMV-DLE 5100/ , DN. 100 to ISO PN Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-DLE 5125/ , DN. 125 to ISO PN Vac (+10%/-15%) Hz, 200 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: Products:

52 103 Dual Modular Valves Flanged version - DMV-D(LE) 5XXX Series DMV-DLE 5050/ , DN. 50 to ISO PN40 24 Vdc (+10%/-15%), 90 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-DLE 5065/ , DN. 65 to ISO PN16 24 Vdc (+10%/-15%), 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: B FORMERLY: DMV-DLE 5080/ , DN. 80 to ISO PN16 24 Vdc (+10%/-15%), 110 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: B FORMERLY: DMV-DLE 5100/ , DN. 100 to ISO PN16 24 Vdc (+10%/-15%), 135 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: DMV-DLE 5125/ , DN. 125 to ISO PN16 24 Vdc (+10%/-15%), 200 VA, NEMA Type 12 REPLAEMENT OIL: REPLAEMENT PWB BOARD: FORMERLY: Products:

53 103 Dual Modular Valves Flanged version - DMV-D(LE) 500XX Series Description The DUNGS Flanged Dual Modular Valve (DMV) 500XX Series, combines two normally closed, automatic shutoff valves in one compact housing, which can be wired independently or in parallel. Valve 1 (V1) and Valve 2 (V2) are fast opening. Application The DMV 500XX Series is recommended for industrial and commercial heating applications that require two safety shutoff valves in series. The DMV is suitable for natural gas, propane, Version butane, air and other inert gases. Harmonized ode: Specifications Pipe size Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating DN 25 and DN 50 (1-2 ) 70 PSI (5Barg) E (lass A) Vac/50-60 Hz 24 Vdc IP 54 Screw Terminals via PG % duty cycle +5 F to +140 F (-15 to +60 ) Aluminum body; Inlet and outlet taps (G1/4 ISO 228); Intermediate tap G1/4 ISO 228; Inlet gas strainer installed in the housing upstream valves. Fast opening & closing (<1 s). 100% duty cycle; Refer to Flow urves for Body Selection. DMV DN. 25 to ISO PN16 24 vdc Starting Power [W] 2x80, Holding Power [W] 2x15, IP54 OILS: V1= & V2= E Approved Only : SA 60 PSI FORMERLY: , DMV , DN. 50 to ISO PN Vac Starting Power [W] 2x80, Holding Power [W] 2x15, (+10%/-15%) 50-60Hz, IP54 OILS: V1= & V2= E Approved Only : SA Pending FORMERLY: DMV , DN. 50 to ISO PN16 24 vdc Starting Power [W] 2x80, Holding Power [W] 2x15, IP65 OILS: V1= & V2= E Approved Only : SA Pending FORMERLY: Products:

54 103 Dual Modular Valves Hazardous Location version - DMV-D(LE) Description The DUNGS Dual Modular Valve (DMV-DLE) combines two normally closed, automatic shutoff valves in one compact housing, which can be wired independently or in parallel. Valve 1 (V1) of the DMV-DLE series is fast opening and fast closing. Valve 2 (V2) of the DMV-DLE is slow-opening for smoother light-off. Max. flow adjustment on V2 provides variable main flow on both models. Hazardous location models are suitable for lass 1; Division 2 installations. Version Application The DMV/6 is recommended for industrial and commercial heating applications that require two safety shutoff valves in series. The DMV is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating 7 PSI (500 mbar) FM, 5 PSI (360 mbar) SA 24 Vac/50-60 Hz; 24 Vdc NEMA Type 12 DIN-connector with 1/2 NPT conduit adapter 100 % duty cycle +5 F to +150 F (-15 to +65 ) DMV-DLE 5065/ F to +150 F (-40 to +65 ) DMV-DLE 703 Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. DMV-DLE 703/602 HL 1, 1 1/4, 1 1/2, 2 NPT or Rp 24 Vdc (+10%/-15%), 90 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: HL , DMV-DLE 5065/11 HL , DN. 65 to ISO PN16 24 Vdc (+10%/-15%), 110 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: HL DMV-DLE 5080/11 HL , DN. 80 to ISO PN16 24 Vdc (+10%/-15%), 110 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: HL 103 Products:

55 100 Dual Modular Valves - DMV-D(LE) Description The DUNGS Dual Modular Valve (DMV-D(LE)/11) combines two normally closed, automatic shutoff valves in one compact housing, which can be wired independently or in parallel. Valve 1 (V1) of the DMV-D and DMV-DLE series is fast opening and fast closing. Valve 2 (V2) of the DMV-D is fast opening, while V2 of the DMV-DLE is slow-opening for smoother light-off. Max. flow adjustment on V1 provides variable main flow on both models. Application Version The DUNGS DMV/11 is recommended for industrial and commercial heating applications that require two safety shutoff valves in series, and E approval. The DMV is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Body sizes Pipe size / thread Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating DMV 507/11 DMV 512/11 DMV 520/11 1/2-1 NPT or Rp 1-2 NPT or Rp 1-2 NPT or Rp 7 PSI (500 mbar) E (lass A) 110 Vac/50-60 Hz; 220 Vac/50-60 Hz, 24 Vdc IP 54 (NEMA Type 12) DIN-connector with 1/2 NPT conduit adapter 100 % duty cycle +5 F to +140 F (- 15 to +60 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. European code requirements for position indication vary. The DUNGS K01 (266893) switch meets EN1531 and EN 161 code requirements for closed position signal contact. DMV-D 503/ /8 Rp 110 Vac (+10%/-15%) Hz, 35 VA, IP 54 FORMERLY: DMV-D 507/ , /2, 3/4, 1 Rp or NPT 110 Vac (+10%/-15%) Hz, 45 VA, IP 54 FORMERLY: B DMV-D 512/ , , 1 1/4, 1 1/2, 2 Rp or NPT 110 Vac (+10%/-15%) Hz, 65 VA, IP 54 FORMERLY: B Products:

56 100 Dual Modular Valves - DMV-D(LE) DMV-D 520/ , , 1 1/4, 1 1/2, 2 Rp or NPT 110 Vac (+10%/-15%) Hz, 90 VA, IP 54 REPLAEMENT OIL: B FORMERLY: DMV-D 503/ /8 Rp 230 Vac (+10%/-15%) Hz, 35 VA, IP FORMERLY: DMV-D 507/ , /2, 3/4, 1 Rp or NPT 230 Vac (+10%/-15%) Hz, 45 VA, IP 54 B FORMERLY: DMV-D 512/ , , 1 1/4, 1 1/2, 2 Rp or NPT 230 Vac (+10%/-15%) Hz, 65 VA, IP 54 B FORMERLY: DMV-D 520/ , , 1 1/4, 1 1/2, 2 Rp or NPT 230 Vac (+10%/-15%) Hz, 90 VA, IP 54 B FORMERLY: DMV-DLE 507/ , /2, 3/4, 1 Rp or NPT 110 Vac (+10%/-15%) Hz, 45 VA, IP 54 B FORMERLY: DMV-DLE 512/ , , 1 1/4, 1 1/2, 2 Rp or NPT 110 Vac (+10%/-15%) Hz, 65 VA, IP 54 B FORMERLY: DMV-DLE 520/ , , 1 1/4, 1 1/2, 2 Rp or NPT 110 Vac (+10%/-15%) Hz, 90 VA, IP 54 REPLAEMENT OIL: B FORMERLY: Products:

57 100 Dual Modular Valves - DMV-D(LE) DMV-DLE 503/ /8 Rp 230 Vac (+10%/-15%) Hz, 35 VA, IP 54 FORMERLY: DMV-DLE 507/ , /2, 3/4, 1 Rp or NPT 230 Vac (+10%/-15%) Hz, 45 VA, IP 54 FORMERLY: B DMV-DLE 512/ , , 1 1/4, 1 1/2, 2 Rp or NPT 230 Vac (+10%/-15%) Hz, 65 VA, IP 54 FORMERLY: B DMV-DLE 520/ , , 1 1/4, 1 1/2, 2 Rp or NPT 230 Vac (+10%/-15%) Hz, 90 VA, IP 54 FORMERLY: B DMV-D 507/ , /2", 3/4", 1" Rp or NPT 24Vdc (-10%/-15%), 45VA, IP 54 FORMERLY: DMV-D 512/ , ", 1 1/4", 1 1/2", 2" Rp or NPT 24Vdc (-10%/-15%), 65VA, IP 54 FORMERLY: DMV-D 520/ , ", 1 1/4", 1 1/2", 2" Rp or NPT 24Vdc (-10%/-15%), 90VA, IP 54 FORMERLY: DMV-DLE 507/ , /2", 3/4", 1" Rp or NPT 24Vdc (-10%/-15%), 45VA, IP 54 FORMERLY: Products:

58 100 Dual Modular Valves - DMV-D(LE) DMV-DLE 512/11 1", 1 1/4", 1 1/2", 2" Rp or NPT 24Vdc (-10%/-15%), 65VA, IP 54 FORMERLY: DMV-DLE 520/11 1", 1 1/4", 1 1/2", 2" Rp or NPT 24Vdc (-10%/-15%), 90VA, IP 54 FORMERLY: , , Products:

59 105 Dual Modular Valves Two Stage - DMV-ZRD(LE) Harmonized ode: Specifications Body sizes Pipe size / thread Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Stage 1 (V1& V2) Electrical connection Stage 2 (V2) Operating time Ambient temperature rating Description The DUNGS Two-Stage Dual Modular Valve (DMV-ZRD(LE)/602) combines two normally closed, automatic shutoff valves in one compact housing, which can be wired independently or in parallel. Valve 2 (V2) incorporates two stages that can be field set at two different firing rates to modulate from high to low during gas burning equipment operation. Valve 1(V1) of the DMV-ZRD and DMV-ZRDLE series is fast opening and fast closing. Valve 2 (V2) is a two stage valve. V2 of the DMV-ZRD is fast opening, while V2 of the (DMV-ZRD(LE)/602) is Version slowopening. Max. flow adjustment on V2 provides variable main flow on both models. Application The DUNGS DMV-ZRD is recommended for industrial and commercial heating applications where two safety shutoff valves in series that modulate between two firing rates are required. The DMV-ZRD/6 Dual Multi-Valve two stage is suitable for natural gas, propane, butane, air and other inert gases. Optional Approvals When ordered and installed with Burkert connector plug (part number ), the UL Recognized DMV valve may replace a UL Listed valve. Such a substitution is typically required for equipment UL Listed to UL 295/UL 795. Link to the Datasheet Link to the User Manual Link to the Flow hart DMV-ZRD(LE) 701/602 DMV-ZRD(LE) 702/602 DMV-ZRD(LE) 703/602 1/2-1 NPT or Rp 1-2 NPT or Rp 1-2 NPT or Rp 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA Vac/50-60 Hz; Vac/50-60 Hz NEMA Type 12 DIN-connector with 1/2 NPT conduit adapter Screw terminals with 1/2" NPT conduit connection 100 % duty cycle -20 F to +150 F (-30 to +65 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); Valve 1(V1) of the DMV-ZRD and DMV-ZRDLE series is fast opening and fast closing. Valve 2 (V2) is a two stage valve. V2 of the DMV- ZRD is fast opening, while V2 of the DMV-ZRDLE is slow-opening for smoother light-off. Max. flow adjustment on V2 provides variable main flow on both models; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. Two visual indicators, (VI) or one PI 400 (PI) , and one VI meet this requirement. These also must be ordered separately. DMV-ZRD 701/602 1/2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 70 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: , B DMV-ZRD 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 120 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: DMV-ZRD 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: Products:

60 105 Dual Modular Valves Two Stage - DMV-ZRD(LE) DMV-ZRDLE 701/ , /2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 70 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: DMV-ZRDLE 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 120 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: DMV-ZRDLE 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: Products:

61 105 Dual Modular Valves Two Stage with Vent Line Adapter - DMV-ZRD(LE) Description The DUNGS Two-Stage Dual Modular Valve (DMV-ZRD(LE)/602 with VLA) combines all the features of the DMV-ZRD(LE) Dual Modular Valve with a factory installed vent line connection between the two automatic shutoff valves. For main gas lines: Up to 1 1/2 ; vent line must be 3/4 2 ; vent line must be 1 Version Application The DUNGS DMV-ZRD is recommended for industrial and commercial heating applications where two safety shutoff valves in series with a vent line connection between the safety shutoff valves that modulate between two firing rates are required. The DMV-ZRD/6 Dual Multi-Valve two stage is suitable for natural gas, propane, butane, air and other inert gases. Optional Approvals When ordered and installed with Burkert connector plug (part number ), the UL Recognized DMV valve may replace a UL Listed valve. Such a substitution is typically required for equipment UL Listed to UL 295/UL 795. Harmonized ode: Specifications Body sizes Pipe size / thread Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Stage 1 (V1& V2) Electrical connection Stage 2 (V2) Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV-ZRD(LE) 701/602 DMV-ZRD(LE) 702/602 DMV-ZRD(LE) 703/602 1/2-1 NPT or Rp 1-2 NPT or Rp 1-2 NPT or Rp 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA Vac/50-60 Hz; Vac/50-60 Hz NEMA Type 12 DIN-connector with 1/2 NPT conduit adapter Screw terminals with 1/2" NPT conduit connection 100 % duty cycle -20 F to +150 F (-30 to +65 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); Valve 1(V1) of the DMV-ZRD and DMV-ZRDLE series is fast opening and fast closing. Valve 2 (V2) is a two stage valve. V2 of the DMV- ZRD is fast opening, while V2 of the DMV-ZRDLE is slow-opening for smoother light-off. Max. flow adjustment on V2 provides variable main flow on both models; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. Two visual indicators, (VI) or one PI 400 (PI) , and one VI meet this requirement. These also must be ordered separately. DMV-ZRD 701/602 with VLA 3/4,1/2, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 70 VA, NEMA Type 12 REPLAEMENT OIL: V 1, B DMV-ZRD 702/602 with VLA V 1, , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 130 VA, NEMA Type 12 REPLAEMENT OIL: B DMV-ZRD 703/602 with VLA V 1, , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B Products:

62 105 Dual Modular Valves Two Stage with Vent Line Adapter - DMV-ZRD(LE) DMV-ZRDLE 701/602 with VLA , /4,1/2, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: V 3.27 DMV-ZRDLE 702/602 with VLA V 1, , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B DMV-ZRDLE 703/602 with VLA V 1, , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B Products:

63 105 Dual Modular Valves Two Stage with Proof of losure - DMV-ZRD(LE) Description The DUNGS Dual Modular Valve (DMV-ZRD(LE)/612) with Proof of losure combines all the features of the DUNGS Dual Modular Valve DMV-ZRD(LE)/6 plus, valve 1 incorporates overtravel and a proof of closure switch which is factory mounted and set. Application The DUNGS DMV-ZRD(LE)/612 is recommended for industrial and commercial heating applications where two safety shutoff valves in series that modulate between two firing rates Version and applications that require overtravel and a proof of closure switch. The DMV-ZRD(LE)/612 is suitable for natural gas, propane, butane, air and other inert gases. Optional Approvals When ordered and installed with Burkert connector plug (part number ), the UL Recognized DMV valve may replace a UL Listed valve. Such a substitution is typically required for equipment UL Listed to UL 295/UL 795. Harmonized ode: Specifications Body sizes Pipe size / thread Max. operating pressure Max. close off pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Stage 1 (V1& V2) Electrical connection Stage 2 (V2) Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV-ZRD(LE) 702/612 DMV-ZRD(LE) 703/ NPT or Rp 1-2 NPT or Rp 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA 10 PSI (700 mbar) Vac/50-60 Hz NEMA Type 12 DIN-connector with 1/2 NPT conduit adapter Screw terminals with 1/2" NPT conduit connection 100 % duty cycle -20 F to +150 F (-30 to +65 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-ZRD - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-ZRDLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. The visual indicator, (VI) meets this requirement. The visual indicator must be ordered separately for valve 2. Factory mounted and calibrated proof of closure switch: SPDT 10 A resistive, 8 FLA, Vac; NEMA type 4; - 40 F to +150 F (-40 to +65 ); Switch incorporates visual indication of valve (opened & closed). DMV-ZRD 701/612 1/2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 70 VA, NEMA Type 12 REPLAEMENT OIL: FORMERLY: P , B DMV-ZRD 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 120 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: P 6.49 DMV-ZRD 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: P 8.22 Products:

64 105 Dual Modular Valves Two Stage with Proof of losure - DMV-ZRD(LE) DMV-ZRDLE 701/ , /2, 3/4, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 70 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: P 3.09 DMV-ZRDLE 702/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 120 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: P 6.63 DMV-ZRDLE 703/ , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: P 8.31 Products:

65 105 Dual Modular Valves Two Stage with Proof of losure & Vent Line Adapter - DMV-ZRD(LE) Description The DUNGS Dual Modular Valve (DMV-ZRD(LE)/612) incorporates overtravel and a proof of closure switch which is factory mounted and set with a Vent Line Adapter (VLA) that is also factory installed. For main gas lines: Up to 1 1/2 ; vent line must be 3/4 2 ; vent line must be 1 Version Application The DMV-VLA is recommended for industrial and commercial heating applications that require two safety shutoff valves with valve 2 Incorporating overtravel and a proof of closure switch and a vent line connection between the safety shutoff valves. The DMV-ZRD(LE) is suitable for natural gas, propane, butane, air and other inert gases. Optional Approvals When ordered and installed with Burkert connector plug (part number ), the UL Recognized DMV valve may replace a UL Listed valve. Such a substitution is typically required for equipment UL Listed to UL 295/UL 795. Harmonized ode: Specifications Body sizes Pipe size / thread Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Stage 1 (V1& V2) Electrical connection Stage 2 (V2) Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart DMV-ZRD(LE) 701/612 DMV-ZRD(LE) 702/612 DMV-ZRD(LE) 703/612 1/2-1 NPT or Rp 1-2 NPT or Rp 1-2 NPT or Rp 7 PSI (500 mbar) UL, FM 5 PSI (360 mbar) SA Vac/50-60 Hz; Vac/50-60 Hz NEMA Type 12 DIN-connector with 1/2 NPT conduit adapter Screw terminals with 1/2" NPT conduit connection 100 % duty cycle -20 F to +150 F (-30 to +65 ) Aluminum body; Inlet, intermediate and outlet side taps (G1/8 ISO 228); Inlet gas strainer installed in the housing upstream valves (23 mesh screen); DMV-D - V1 fast opening & closing (<1 s), V2 fast opening & closing (<1 s); DMV-DLE - V1 fast opening & closing (<1s); V2 slow opening 20s 70F & fast closing (<1 s); V2 on both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. ode requirements vary. FM requires visual indication on 1" and larger safety valves. The visual indicator, (VI) meets this requirement. The visual indicator must be ordered separately for valve 1. Factory mounted and calibrated proof of closure switch: SPDT 10 A resistive, 8 FLA, Vac; NEMA type 4; - 40 F to +150 F (-40 to +65 ); Switch incorporates visual indication of valve (opened & closed). DMV-ZRD 701/612 with VLA 3/4,1/2, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 70 VA, NEMA Type 12 REPLAEMENT OIL: VP 1, B DMV-ZRD 702/612 with VLA , , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 130 VA, NEMA Type 12 REPLAEMENT OIL: B FORMERLY: VP 6.90 DMV-ZRD 703/612 with VLA VP 2, , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B Products:

66 105 Dual Modular Valves Two Stage with Proof of losure & Vent Line Adapter - DMV-ZRD(LE) DMV-ZRDLE 701/612 with VLA VP 1, /4,1/2, 1 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B DMV-ZRDLE 702/612 with VLA VP 1, , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B DMV-ZRDLE 703/612 with VLA VP 2, , 1 1/4, 1 1/2, 2 NPT or Rp 120 Vac (+10%/-15%) Hz, 135 VA, NEMA Type 12 REPLAEMENT OIL: B Products:

67 Single Automatic Shutoff Valves Product Model Page Single Automatic Shut-off Valves - MV-D(LE) US 30.1 Single Automatic Shut-off Valves - MV-D(LE) EU 31.1 Single Automatic Shut-off Valves - NEMA Type 4 with Proof of losure - SV-(DLE) US 32.1 Single Automatic Shut-off Valves - NEMA Type 4 - SV-(DLE) US 33.1 Single Automatic Shut-Off Valves IP 65 - SV-(DLE) EU 34.1

68 110 Single Automatic Shut-off Valves - MV-D(LE) Description The DUNGS MVD/6 and MVDLE/6 electrically operated, normally closed, automatic shutoff valves for gas burning equipment. Application The MVD/6 and MVDLE/6 are recommended for industrial and commercial heating applications that require one or two automatic shutoff valves in series. The MVD and MVDLE valves are suitable for natural gas, propane, butane, air and other inert gases. Version Harmonized ode: Specifications Pipe thread (NPT) Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" MVD - 7 PSI (500 mbar) [5 SA]; MVDLE - 3 PSI (200 mbar) [2 SA] Vac/60 Hz; 24 Vac/60 Hz (Some Models) 24 Vdc NEMA Type 12 (.../602 Series) NEMA Type 4 (.../604 Series) Screw terminals with 1/2" NPT conduit connection 100 % duty cycle -20 F to +120 F (-30 to +50 ), Aluminum body; Inlet and outlet side taps (1/4 NPT); Inlet gas strainer installed in the housing upstream valve (23 mesh screen); MVD - fast opening & closing (<1 s), MVDLE - slow opening 20s 70F & fast closing (<1 s); both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. ode requirements vary. FM requires visual indication on 1" and larger safety valves. The visual indicator, (VI) and PI 400 (266968) meet this requirement. These must be ordered separately. MVD 505/602 1/2 NPT 120 Vac (+10%/-15%), 60 Hz 15 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 100: FORMERLY: A MVD 507/ /4 NPT 120 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 200: A FORMERLY: MVD 510/ NPT 120 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 200: A FORMERLY: Products:

69 110 Single Automatic Shut-off Valves - MV-D(LE) MVD 512/ /4 NPT 120 Vac (+10%/-15%), 60 Hz 60 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 300: A FORMERLY: MVD 515/ /2 NPT 120 Vac (+10%/-15%), 60 Hz 60 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 300: A FORMERLY: MVD 520/ NPT 120 Vac (+10%/-15%), 60 Hz 60 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 400: FORMERLY: MVD 525/ , /2 NPT 120 Vac (+10%/-15%), 60 Hz 80 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 500: FORMERLY: MVD 530/ , NPT 120 Vac (+10%/-15%), 60 Hz 90 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 550: FORMERLY: MVD 505/ /2 NPT 24 Vac (+10%/-15%), 60 Hz 15 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MVD 507/ /4 NPT 24 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 200: FORMERLY: MVD 510/ NPT 24 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 200: FORMERLY: Products:

70 110 Single Automatic Shut-off Valves - MV-D(LE) MVDLE 205/ /2 NPT 120 Vac (+10%/-15%), 60 Hz 15 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 100: A FORMERLY: MVDLE 207/ /4 NPT 120 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 200: A FORMERLY: MVDLE 210/ NPT 120 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 200: A FORMERLY: MVDLE 212/ /4 NPT 120 Vac (+10%/-15%), 60 Hz 60 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 300: A FORMERLY: MVDLE 215/ /2 NPT 120 Vac (+10%/-15%), 60 Hz 60 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 300: A FORMERLY: MVDLE 220/ NPT 120 Vac (+10%/-15%), 60 Hz 60 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 300: FORMERLY: MVDLE 225/ , /2 NPT 120 Vac (+10%/-15%), 60 Hz 80 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 400: FORMERLY: MVDLE 230/ , NPT 120 Vac (+10%/-15%), 60 Hz 90 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 500: FORMERLY: Products:

71 110 Single Automatic Shut-off Valves - MV-D(LE) MVDLE 205/ /2 NPT 24 Vac (+10%/-15%), 60 Hz 15 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MVDLE 207/ /4 NPT 24 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 200: FORMERLY: MVDLE 210/ NPT 24 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 12 REPLAEMENT OIL MAG TYPE 200: FORMERLY: MVD 505/ /2 NPT 120 Vac (+10%/-15%), 60 Hz 15 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MVD 507/ /4 NPT 120 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 200: FORMERLY: MVD 510/ NPT 120 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 200: FORMERLY: MVD 512/ /4 NPT 120 Vac (+10%/-15%), 60 Hz 60 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 300: FORMERLY: MVD 515/ /2 NPT 120 Vac (+10%/-15%), 60 Hz 60 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 300: FORMERLY: Products:

72 110 Single Automatic Shut-off Valves - MV-D(LE) MVD 520/ NPT 120 Vac (+10%/-15%), 60 Hz 60 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 400: FORMERLY: MVD 525/ , /2 NPT 120 Vac (+10%/-15%), 60 Hz 80 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 500: FORMERLY: MVD 530/ , NPT 120 Vac (+10%/-15%), 60 Hz 90 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 550: FORMERLY: MVDLE 205/ /2 NPT 120 Vac (+10%/-15%), 60 Hz 15 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MVDLE 207/ /4 NPT 120 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 200: FORMERLY: MVDLE 210/ , NPT 120 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 200: FORMERLY: MVDLE 212/ /4 NPT 120 Vac (+10%/-15%), 60 Hz 25 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 300: FORMERLY: MVDLE 215/ /2 NPT 120 Vac (+10%/-15%), 60 Hz 60 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 300: FORMERLY: Products:

73 110 Single Automatic Shut-off Valves - MV-D(LE) MVDLE 220/ NPT 120 Vac (+10%/-15%), 60 Hz 60 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 300: FORMERLY: MVDLE 225/ , /2 NPT 120 Vac (+10%/-15%), 60 Hz 80 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 400: FORMERLY: MVDLE 230/ , NPT 120 Vac (+10%/-15%), 60 Hz 90 VA, NEMA Type 4 REPLAEMENT OIL MAG TYPE 500: FORMERLY: Products:

74 110 Single Automatic Shut-off Valves - MV-D(LE) Description The DUNGS MVD and the MVDLE electrically operated, normally closed, automatic shutoff valves for gas burning equipment. Application The DUNGS MVD and MVDLE are recommended for industrial and commercial heating applications that require one or two automatic shutoff valves in series. The MVD and MVDLE safety shutoff valves are suitable for natural gas, propane, butane, air and other inert gases. Version Harmonized ode: Specifications Pipe thread (RP) Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" MVD - 7 PSI (500 mbar), MVDLE - 3 PSI (200 mbar) Vac/50-60 Hz; Vac/50-60 Hz 24 Vdc IP 54 (NEMA Type 12) Screw terminals with SO cord connection 100 % duty cycle + 5 F to +140 F (-15 to +60 ), Aluminum body; Inlet side taps (G1/4 ); Inlet gas strainer installed in the housing upstream valve (23 mesh screen); MVD fast opening & closing (<1 s), MVDLE - slow opening 20s 70F & fast closing (<1 s); both models feature a manually adjustable flow rate (<10-100%); 100% duty cycle; Refer to Flow urves for Body Selection. European code requirements for position indication vary. The DUNGS K01 (266893) switch meets EN1531 and EN 161 code requirements for closed position signal contact. MVD 503/5 Rp 3/8 110 Vac (+10%/-15%), 50/60 Hz 15 VA, IP 54 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MVD 505/ Rp 1/2 110 Vac (+10%/-15%), 50/60 Hz 15 VA, IP 54 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MVD 507/ Rp 3/4 110 Vac (+10%/-15%), 50/60 Hz 25 VA, IP 54 REPLAEMENT OIL MAG TYPE 200: FORMERLY: Products:

75 110 Single Automatic Shut-off Valves - MV-D(LE) MVD 510/ Rp Vac (+10%/-15%), 50/60 Hz 25 VA, IP 54 REPLAEMENT OIL MAG TYPE 200: FORMERLY: MVD 515/ Rp 1 1/2 110 Vac (+10%/-15%), 50/60 Hz 60 VA, IP 54 REPLAEMENT OIL MAG TYPE 300: FORMERLY: MVD 520/ , Rp Vac (+10%/-15%), 50/60 Hz 90 VA, IP 54 REPLAEMENT OIL MAG TYPE 400: MVD 525/ , Rp 2 1/2 110 Vac (+10%/-15%), 50/60 Hz 90 VA, IP 54 REPLAEMENT OIL MAG TYPE 500: FORMERLY: MVD 503/ Rp 3/8 230 Vac (+10%/-15%), 50/60 Hz 15 VA, IP 54 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MVD 505/ Rp 1/2 230 Vac (+10%/-15%), 50/60 Hz 15 VA, IP 54 REPLAEMENT OIL MAG TYPE 100: B FORMERLY: MVD 507/ Rp 3/4 230 Vac (+10%/-15%), 50/60 Hz 25 VA, IP 54 REPLAEMENT OIL MAG TYPE 200: B FORMERLY: MVD 510/ Rp Vac (+10%/-15%), 50/60 Hz 25 VA, IP 54 REPLAEMENT OIL MAG TYPE 200: B FORMERLY: Products:

76 110 Single Automatic Shut-off Valves - MV-D(LE) MVD 515/ Rp 1 1/2 230 Vac (+10%/-15%), 50/60 Hz 60 VA, IP 54 REPLAEMENT OIL MAG TYPE 300: B FORMERLY: MVD 520/ , Rp Vac (+10%/-15%), 50/60 Hz 90 VA, IP 54 REPLAEMENT OIL MAG TYPE 400: B FORMERLY: MVD 525/ , Rp 2 1/2 230 Vac (+10%/-15%), 50/60 Hz 90 VA, IP 54 REPLAEMENT OIL MAG TYPE 500: B FORMERLY: MVDLE 203/ Rp 3/8 110 Vac (+10%/-15%), 50/60 Hz 15 VA, IP 54 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MVDLE 205/ Rp 1/2 110 Vac (+10%/-15%), 50/60 Hz 15 VA, IP 54 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MVDLE 207/ Rp 3/4 110 Vac (+10%/-15%), 50/60 Hz 25 VA, IP 54 REPLAEMENT OIL MAG TYPE 200: FORMERLY: MVDLE 210/ Rp Vac (+10%/-15%), 50/60 Hz 25 VA, IP 54 REPLAEMENT OIL MAG TYPE 200: FORMERLY: MVDLE 215/ Rp 1 1/2 110 Vac (+10%/-15%), 50/60 Hz 60 VA, IP 54 REPLAEMENT OIL MAG TYPE 300: FORMERLY: Products:

77 110 Single Automatic Shut-off Valves - MV-D(LE) MVDLE 220/ , Rp Vac (+10%/-15%), 50/60 Hz 60 VA, IP 54 REPLAEMENT OIL MAG TYPE 300: MVDLE 225/ , Rp 2 1/2 110 Vac (+10%/-15%), 50/60 Hz 90 VA, IP 54 REPLAEMENT OIL MAG TYPE 400: MVDLE 203/ Rp 3/8 230 Vac (+10%/-15%), 50/60 Hz 15 VA, IP 54 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MVDLE 205/ Rp 1/2 230 Vac (+10%/-15%), 50/60 Hz 15 VA, IP 54 REPLAEMENT OIL MAG TYPE 100: B FORMERLY: MVDLE 207/ Rp 3/4 230 Vac (+10%/-15%), 50/60 Hz 25 VA, IP 54 REPLAEMENT OIL MAG TYPE 200: B FORMERLY: MVDLE 210/ Rp Vac (+10%/-15%), 50/60 Hz 25 VA, IP 54 REPLAEMENT OIL MAG TYPE 200: B FORMERLY: MVDLE 215/ Rp 1 1/2 230 Vac (+10%/-15%), 50/60 Hz 60 VA, IP 54 REPLAEMENT OIL MAG TYPE 300: B FORMERLY: MVDLE 220/ , Rp Vac (+10%/-15%), 50/60 Hz 60 VA, IP 54 REPLAEMENT OIL MAG TYPE 300: B FORMERLY: Products:

78 110 Single Automatic Shut-off Valves - MV-D(LE) MVDLE 225/ , Rp 2 1/2 230 Vac (+10%/-15%), 50/60 Hz 90 VA, IP 54 REPLAEMENT OIL MAG TYPE 500: B FORMERLY: MVDLE 503/ Rp 3/8 230 Vac (+10%/-15%), 50/60 Hz 15 VA, IP 54 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MVDLE 505/5 Rp 1/ Vac (+10%/-15%), 50/60 Hz 15 VA, IP 54 REPLAEMENT OIL MAG TYPE 120: FORMERLY: O PRIE ON REQUEST MVDLE 507/ Rp 3/4 230 Vac (+10%/-15%), 50/60 Hz 25 VA, IP 54 REPLAEMENT OIL MAG TYPE 200: FORMERLY: MVDLE 510/5 Rp Vac (+10%/-15%), 50/60 Hz 25 VA, IP 54 REPLAEMENT OIL MAG TYPE 250: FORMERLY: O PRIE ON REQUEST MVDLE 515/ Rp 1 1/2 230 Vac (+10%/-15%), 50/60 Hz 60 VA, IP 54 REPLAEMENT OIL MAG TYPE 300: FORMERLY: MVDLE 520/ , Rp Vac (+10%/-15%), 50/60 Hz 90 VA, IP 54 REPLAEMENT OIL MAG TYPE 400: FORMERLY: MV Rp 1/4 110 Vac (+10%/-15%), 50/60 Hz 5 VA, IP 54 B FORMERLY: Products:

79 110 Single Automatic Shut-off Valves - MV-D(LE) MV Rp 1/4 230 Vac (+10%/-15%), 50/60 Hz 5 VA, IP 54 REPLAEMENT OIL MAG TYPE 100: FORMERLY: MV Rp 1/4" Pipe oupling 230 Vac (+10%/-15%), 50/60 Hz 5 VA, IP FORMERLY: LGV 507/ Rp 3/4" Normally OPEN Vent Valve 110 Vac (+10%/-15%), 50/60 Hz 15 VA, IP 54 REPLAEMENT OIL MAG TYPE 100: B FORMERLY: LGV 507/ Rp 3/4" Normally OPEN Vent Valve 230 Vac (+10%/-15%), 50/60 Hz 15 VA, IP FORMERLY: LGV 507/ Rp 3/4" Normally OPEN Vent Valve 24 Vdc (+10%/-15%) 15 VA, IP FORMERLY: Products:

80 110 Single Automatic Shut-off Valves NEMA Type 4 with Proof of losure - SV-(DLE) Description The DUNGS SV and the SV-DLE are electrically operated, normally closed, automatic shutoff valves for gas burning equipment. The SV & SV-DLE /614 Incorporate overtravel and a proof of closure switch. Application The SV and SV-DLE are recommended for industrial and commercial heating applications that require one or two automatic shutoff valves in series with proof of closure. The SV and Version SV-DLE safety shutoff valves are suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Pipe thread (NPT) Max. operating pressure Max. close off pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 10 PSI (700 mbar) 15 PSI (1000 mbar) 120 Vac Hz NEMA Type 4 - Mounted upright only DIN-connector with 1/2 NPT conduit adapter 100 % duty cycle - 40 F to +140 F (-40 to +60 ) Aluminum body; NPT threaded inlet, NPT flanged outlet (supplied with valve); Multiple test ports, G 1/8 ISO 228 test ports available on the SV and SV-DLE. See sales brochure for details. Inlet gas strainer installed in the housing upstream valve (23 mesh screen); SV fast opening & closing (<1 s), SV-DLE - slow opening 20s 70F & fast closing (<1 s), and manually adjustable flow rate (0-100%); 100% duty cycle; Refer to flow curves for body selection. Factory mounted and calibrated proof of closure switch: SPDT 10 A resistive, 8 FLA, Vac; NEMA type 4; - 40 F to +150 F (-40 to +65 ); Switch incorporates visual indication of valve (opened & closed). onduit Adapter (240671) and DIN connector (210319) must be ordered and priced separately. SV 1005/614 1/2 NPT 120 Vac (+10%/-15%), 50/60 Hz 20 VA, NEMA Type 4 Small Body FORMERLY: P A SV 1007/ /4 NPT 120 Vac (+10%/-15%), 50/60 Hz 20 VA, NEMA Type 4 Small Body A FORMERLY: P 1.50 SV 1010/ NPT 120 Vac (+10%/-15%), 50/60 Hz 25 VA, NEMA Type 4 Medium Body A FORMERLY: P 4.22 Products:

81 110 Single Automatic Shut-off Valves NEMA Type 4 with Proof of losure - SV-(DLE) SV 1012/ /4 NPT 120 Vac (+10%/-15%), 50/60 Hz 25 VA, NEMA Type 4 Medium Body A FORMERLY: P 4.22 SV 1015/ /2 NPT 120 Vac (+10%/-15%), 50/60 Hz 45 VA, NEMA Type 4 Large Body A FORMERLY: P 7.31 SV 1020/ NPT 120 Vac (+10%/-15%), 50/60 Hz 45 VA, NEMA Type 4 Large Body A FORMERLY: P 7.31 SV-DLE 1005/ /2 NPT 120 Vac (+10%/-15%), 50/60 Hz 20 VA, NEMA Type 4 Small Body A FORMERLY: P 1.59 SV-DLE 1007/ /4 NPT 120 Vac (+10%/-15%), 50/60 Hz 20 VA, NEMA Type 4 Small Body A FORMERLY: P 1.59 SV-DLE 1010/ NPT 120 Vac (+10%/-15%), 50/60 Hz 25 VA, NEMA Type 4 Medium Body A FORMERLY: P 4.22 SV-DLE 1012 / /4 NPT 120 Vac (+10%/-15%), 50/60 Hz 25 VA, NEMA Type 4 Medium Body A FORMERLY: P 4.22 SV-DLE 1015/ /2 NPT 120 Vac (+10%/-15%), 50/60 Hz 45 VA, NEMA Type 4 Large Body A FORMERLY: P 7.31 Products:

82 110 Single Automatic Shut-off Valves NEMA Type 4 with Proof of losure - SV-(DLE) SV-DLE 1020/ NPT 120 Vac (+10%/-15%), 50/60 Hz 45 VA, NEMA Type 4 Large Body A FORMERLY: P 7.31 Products:

83 110 Single Automatic Shut-off Valves NEMA Type 4 - SV-(DLE) Description The DUNGS SV and the SV-DLE are electrically operated, normally closed, automatic shutoff valves for gas burning equipment. Application The SV and SV-DLE are recommended for industrial and commercial heating applications that require one or two automatic shutoff valves in series with proof of closure. The SV and SV-DLE safety shutoff valves are suitable for natural gas, propane, butane, air and other Version inert gases. Harmonized ode: Specifications Pipe thread (NPT) Max. operating pressure Max. close off pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 10 PSI (700 mbar) 15 PSI (1000 mbar) 120 Vac Hz NEMA Type 4 - Mounted upright only DIN-connector with 1/2 NPT conduit adapter 100 % duty cycle - 40 F to +140 F (-40 to +60 ) Aluminum body; NPT threaded inlet, NPT flanged outlet (supplied with valve); Multiple test ports, G 1/8 ISO 228 test ports available on the SV and SV-DLE. See sales brochure for details. Inlet gas strainer installed in the housing upstream valve (23 mesh screen); SV fast opening & closing (<1 s), SV-DLE - slow opening 20s 70F & fast closing (<1 s), and manually adjustable flow rate (0-100%); 100% duty cycle; Refer to flow curves for body selection. ode requirements vary. FM requires visual indication on 1" and larger safety valves. The visual indicator, (VI) or one PI 400 (PI) , meet this requirement. These must be ordered separately. onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. SV 1005/604 1/2 NPT 120 Vac (+10%/-15%), 50/60 Hz 20 VA, NEMA Type 4 Small body FORMERLY: NP A SV 1007/ /4 NPT 120 Vac (+10%/-15%), 50/60 Hz 20 VA, NEMA Type 4 Small body B FORMERLY: NP 1.50 SV 1010/ NPT 120 Vac (+10%/-15%), 50/60 Hz 25 VA, NEMA Type 4 Medium body B FORMERLY: NP 4.22 Products:

84 110 Single Automatic Shut-off Valves NEMA Type 4 - SV-(DLE) SV 1012/ /4 NPT 120 Vac (+10%/-15%), 50/60 Hz 25 VA, NEMA Type 4 Medium body FORMERLY: NP 4.22 SV 1015/ /2 NPT 120 Vac (+10%/-15%), 50/60 Hz 45 VA, NEMA Type 4 Large body B FORMERLY: NP 7.31 SV 1020/ NPT 120 Vac (+10%/-15%), 50/60 Hz 45 VA, NEMA Type 4 Large body FORMERLY: NP 7.31 SV-DLE 1005/ /2 NPT 120 Vac (+10%/-15%), 50/60 Hz 20 VA, NEMA Type 4 Small body FORMERLY: NP 1.59 SV-DLE 1007/ /4 NPT 120 Vac (+10%/-15%), 50/60 Hz 20 VA, NEMA Type 4 Small body FORMERLY: NP 1.59 SV-DLE 1010/ NPT 120 Vac (+10%/-15%), 50/60 Hz 25 VA, NEMA Type 4 Medium body FORMERLY: NP 4.22 SV-DLE 1012/ /4 NPT 120 Vac (+10%/-15%), 50/60 Hz 25 VA, NEMA Type 4 Medium body FORMERLY: NP 4.22 SV-DLE 1015/ /2 NPT 120 Vac (+10%/-15%), 50/60 Hz 45 VA, NEMA Type 4 Large body FORMERLY: NP 7.31 Products:

85 110 Single Automatic Shut-off Valves NEMA Type 4 - SV-(DLE) SV-DLE 1020/ NPT 120 Vac (+10%/-15%), 50/60 Hz 45 VA, NEMA Type 4 Large body FORMERLY: NP 7.31 Products:

86 110 Single Automatic Shut-off Valves IP 65 - SV-(DLE) Description The DUNGS SV and the SV-DLE are electrically operated, normally closed, automatic shutoff valves for gas burning equipment. Application The SV and SV-DLE are recommended for industrial and commercial heating applications that require one or two automatic shutoff valves in series. The SV and SV-DLE safety shutoff valves are suitable for natural gas, propane, butane, air and other inert gases. Version Harmonized ode: Specifications Pipe thread (Rp) Max. operating pressure Max. close off pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 10 PSI (700 mbar) 15 PSI (1000 mbar) 110 & 220 Vac Hz, 24 Vdc IP 65 - Mounted upright only DIN-connector with 1/2 NPT conduit adapter 100 % duty cycle +5 F to +140 F (-15 to +60 ) Aluminum body; Rp threaded inlet, Rp flanged outlet (supplied with valve); Multiple test ports, G 1/8 ISO 228 test ports available on the SV and SV- DLE. See sales brochure for details. Inlet gas strainer installed in the housing upstream valve (23 mesh screen); SV fast opening & closing (<1 s), SV-DLE - slow opening 20s 70F & fast closing (<1 s), and manually adjustable flow rate (0-100%); 100% duty cycle; Refer to flow curves for body selection. European code requirements for position indication vary. The DUNGS K01 (266893) switch meets EN1531 and EN 161 code requirements for closed position signal contact. (Variant 7 only) onduit Adapter (240671), DIN connector (210319), and flanges must be ordered and priced separately. SV-D Variant Vac (+10%/-15%), 50/60 Hz 20 VA, IP 65 Small body FORMERLY: NP SV-D Variant Vac (+10%/-15%), 50/60 Hz 20 VA, IP 65 Small body FORMERLY: NP SV-D Variant Vac (+10%/-15%), 50/60 Hz 25 VA, IP 65 Medium body FORMERLY: NP Products:

87 110 Single Automatic Shut-off Valves IP 65 - SV-(DLE) SV-D 512 Variant NP O 220 Vac (+10%/-15%), 50/60 Hz 25 VA, IP 65 Medium body PRIE ON REQUEST 4.22 SV-D Variant Vac (+10%/-15%), 50/60 Hz 50VA, IP 65 Large body FORMERLY: NP O 110 PRIE ON REQUEST SV-D , Variant Vac (+10%/-15%), 50/60 Hz 50 VA, IP 65 Large body FORMERLY: NP SV-DLE Variant Vac (+10%/-15%), 50/60 Hz 20 VA, IP 65 Small body FORMERLY: NP O 110 PRIE ON REQUEST SV-DLE Variant Vac (+10%/-15%), 50/60 Hz 20 VA, IP 65 Small body FORMERLY: NP SV-DLE NP Variant Vac (+10%/-15%), 50/60 Hz 25 VA, IP 65 Medium body SV-DLE Variant Vac (+10%/-15%), 50/60 Hz 25 VA, IP 65 Medium body FORMERLY: NP O 110 PRIE ON REQUEST SV-DLE NP Variant Vac (+10%/-15%), 50/60 Hz 50 VA, IP 65 Large body Products:

88 110 Single Automatic Shut-off Valves IP 65 - SV-(DLE) SV-DLE 520 Variant NP O 220 Vac (+10%/-15%), 50/60 Hz 50 VA, IP 65 Large body PRIE ON REQUEST 7.31 SV-D NP Variant 6 O 110 Vac (+10%/-15%), 50/60 Hz 20 VA, IP 65 Small body PRIE ON REQUEST 1.50 SV-D NP Variant 6 O 110 Vac (+10%/-15%), 50/60 Hz 20 VA, IP 65 Small body PRIE ON REQUEST 1.50 SV-D 510 Variant NP O 110 Vac (+10%/-15%), 50/60 Hz 25 VA, IP 65 Medium body PRIE ON REQUEST 4.22 SV-D NP Variant 7 O 110 Vac (+10%/-15%), 50/60 Hz 25 VA, IP 65 Medium body PRIE ON REQUEST 4.22 SV-D Variant 7 O 110 Vac (+10%/-15%), 50/60 Hz 50 VA, IP 65 Large body PRIE ON REQUEST FORMERLY: NP 7.31 SV-D 520 Variant NP O 110 Vac (+10%/-15%), 50/60 Hz 50 VA, IP 65 Large body PRIE ON REQUEST 7.31 SV-DLE NP Variant 6 O 110 Vac (+10%/-15%), 50/60 Hz 20 VA, IP 65 Small body PRIE ON REQUEST 1.59 Products:

89 110 Single Automatic Shut-off Valves IP 65 - SV-(DLE) SV-DLE 507 Variant NP O 110 Vac (+10%/-15%), 50/60 Hz 20 VA, IP 65 Small body PRIE ON REQUEST 1.59 SV-DLE NP Variant 7 O 110 Vac (+10%/-15%), 50/60 Hz 25 VA, IP 65 Medium body PRIE ON REQUEST 4.22 SV-DLE NP Variant 7 O 110 Vac (+10%/-15%), 50/60 Hz 25 VA, IP 65 Medium body PRIE ON REQUEST 4.22 SV-DLE 515 Variant NP O 110 Vac (+10%/-15%), 50/60 Hz 50 VA, IP 65 Large body PRIE ON REQUEST 7.31 SV-DLE NP Variant 7 O 110 Vac (+10%/-15%), 50/60 Hz 50 VA, IP 65 Large body PRIE ON REQUEST 7.31 SV-D Variant 6 24Vdc (+10%/-15%) 20 VA, IP 65 Small body FORMERLY: NP SV-D 507 Variant O 24Vdc (+10%/-15%) 20 VA, IP 65 Small body PRIE ON REQUEST FORMERLY: NP 1.50 SV-D Variant 7 O 24Vdc (+10%/-15%) 25 VA, IP 65 Medium body PRIE ON REQUEST FORMERLY: NP 4.22 Products:

90 110 Single Automatic Shut-off Valves IP 65 - SV-(DLE) SV-D 515 Variant O 24Vdc (+10%/-15%) 50 VA, IP 65 Large body PRIE ON REQUEST FORMERLY: NP 7.31 SV-D NP Variant 7 O 24Vdc (+10%/-15%) 50 VA, IP 65 Large body PRIE ON REQUEST 7.31 SV-DLE Variant 6 O 24Vdc (+10%/-15%) 20 VA, IP 65 Small body PRIE ON REQUEST FORMERLY: NP 1.50 SV-DLE 507 Variant NP O 24Vdc (+10%/-15%) 20 VA, IP 65 Small body PRIE ON REQUEST 1.50 SV-DLE 510 TBD Variant 7 O 24Vdc (+10%/-15%) 25 VA, IP 65 Medium body PRIE ON REQUEST 4.22 SV-DLE NP Variant 7 O 24Vdc (+10%/-15%) 50 VA, IP 65 Large body PRIE ON REQUEST 7.31 SV-DLE 520 Variant NP O 24Vdc (+10%/-15%) 50 VA, IP 65 Large body PRIE ON REQUEST 7.31 Products:

91 Valve Proving Systems Product Model Page Valve Proving Systems, Modular Mount - VPS US 40.1 Valve Proving Systems, Modular Mount - VPS EU 41.1 Valve Proving Systems, Pipe Mount - VDK US 42.1 Valve Proving Systems, Pipe Mount - VDK EU 43.1 Valve Proving Systems, Modular Mount - VPM US/EU 44.1

92 120 Valve Proving Systems, Modular Mount - VPS Description The DUNGS VPS 504 S06 is a valve proving system for DMV series safety valves. It checks that both safety shutoff valves in a DMV series gas train are fully closed before either a system startup and/or after system shutdown when wired and interlocked to a suitable flame safeguard control. The VPS 504 S06 will halt the startup sequence to a piece of gas burning equipment if it detects an open safety shutoff valve, thus preventing ignition under undesirable conditions. Version Application The VPS 504 S06 is recommended for industrial and commercial heating applications. Some authorities having jurisdiction accept the VPS 504 S06 in lieu of proof of closure when integrated with the pre-ignition system and/or in lieu of a vent valve when it checks the valves at start up and shut down. The VPS 504 S06 is suitable for natural gas, propane, air and other inert gases. Not suitable for butane gas. Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Max. operating pressure Electrical ratings (+10% / -15%) ontact rating Enclosure rating Electrical connection Operating time Ambient temperature rating 7 PSI (500 mbar) 120 Vac 60 Hz Run T5: 4 A res, Vac/60 Hz Alarm T3: 1 A res, Vac/60 Hz NEMA Type 12 Screw terminals with 1/2" NPT conduit connection 100% duty cycle, max. 20 test cycles/hr +5 F to +140 F (-15 to +60 ) Aluminum body; test cycle approximately 10 to 26s; light indication for permissive or alarm conditions; screw terminals for electrical connection with 1/2" conduit adapter; customer must provide 10 amp quick fuse or a 6.3 amp slow blow fuse. ode requirements vary. Accepted by XL Gap Services (formerly IRI) in lieu of a vent line when used to check valves on start up and shut down. Accepted by XL Gap Services (formerly IRI) and FM for "proof-of-closure"; Max switching-on duration not exceed 20 cycles/hr; Not for use with Butane Gas. VPS 504 S06 max. Vol. 0,14 cu ft (4 liters) 120 Vac (+10%/-15%), 60 Hz, SPDT Sw 120 Vac, NEMA 12 FORMERLY: A Products:

93 120 Valve Proving Systems, Modular Mount - VPS Description The DUNGS VPS 504 S04 is a valve proving system for DMV series safety valves. It checks that both safety shutoff valves in a DMV series gas train are fully closed before either a system startup and/or after system shutdown when wired and interlocked to a suitable flame safeguard control. The VPS will halt the startup sequence to a piece of gas burning equipment if it detects an open safety shutoff valve, thus preventing ignition under dangerous conditions. Version Application The VPS 504 S04 is recommended for industrial and commercial heating applications. where E approval is required. The VPS is the means for proof of closure and normally open vent line alternative. The VPS is required for E compliance on system with capacities of 4.1 Mbtu and up. The VPS is suitable for natural gas, propane, air and other inert gases. Not suitable for butane gas. Harmonized ode: Specifications Max. operating pressure Electrical ratings (+10% / -15%) ontact rating Enclosure rating Electrical connection Operating time Ambient temperature rating 7 PSI (500 mbar) Vac/50 or 60 Hz Vac/50 or 60 Hz Run: / 230 Vac/50 Hz Alarm: / 230 Vac/50 Hz IP 54 Screw terminals with SO cord connection 100% duty cycle, max. 20 test cycles/hr +5 F to +140 F (-15 to +60 ) Aluminum body; test cycle approximately 10 to 26s; light indication for permissive or alarm conditions; Screw terminals with SO cord connection. European code requirements may vary. The DUNGS VPS meets EN code requirements for a leak tightness device as required for applications with capacities greater than 4,100,000 Btu. (1200 kw). VPS 504 S04 max. Vol. 0,14 cu ft (4 liters) 110 Vac (+10%/-15%), 50 Hz, SPDT Sw 120 Vac, IP 54 FORMERLY: VPS 504 S max. Vol. 0,14 cu ft (4 liters) 230 Vac (+10%/-15%), 50 Hz, SPDT Sw 250 Vac, IP FORMERLY: VPS 504 S max. Vol. 0,14 cu ft (4 liters) 230 Vac (+10%/-15%), 50 Hz, SPDT Sw 250 Vac, IP FORMERLY: Products:

94 120 Valve Proving Systems, Modular Mount - VPS VPS 504 S max. Vol. 0,14 cu ft (4 liters) 220 Vac (+10%/-15%), 60 Hz, SPDT Sw 250 Vac, IP FORMERLY: VPS 504 S max. Vol. 0,14 cu ft (4 liters) 110 Vac (+10%/-15%), 60 Hz, SPDT Sw 120 Vac, IP FORMERLY: VPS 504 S max. Vol. 0,14 cu ft (4 liters) 24 Vdc, SPDT Sw 24 Vdc, IP 54 SA APPROVED FORMERLY: Products:

95 120 Valve Proving Systems, Pipe Mount VDK Description The DUNGS VDK 200A is a valve proving system for safety shutoff valves. It checks that both safety shutoff valves in a gas train are fully closed before a system startup or after system shutdown when wired and interlocked to a suitable flame safeguard control. The VDK 200 will halt the startup sequence to a piece of gas burning equipment if it detects an open safety shutoff valve, thus preventing ignition under undesirable conditions. Application Version The DUNGS VDK 200A is recommended for industrial and commercial heating applications. Some authorities having jurisdiction accept the VDK 200 in lieu of proof of closure when integrated with the pre-ignition system. It can also be used in lieu of a vent valve when it checks the valves at start up and shut down. The VDK 200 is suitable for natural gas, propane, butane, air and other inert gases. Not for Hydrogen. Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Max. operating pressure Electrical ratings (+10% / -15%) Enclosure rating Electrical connection Operating time Ambient temperature rating 5 PSI (360 mbar) 120 Vac 60 Hz NEMA Type 1 Screw terminals with 1/2" NPT conduit connection 100% duty cycle, max. 20 test cycles/hr +14 F to +140 F (-10 to +60 ) Aluminum body; test cycle approximately 26s maximum; light indication for permissive or alarm conditions; screw terminals for electrical connection with 1/2" conduit adapter. ode requirements vary. Accepted by XL Gap Services (formerly IRI) in lieu of a vent line when used to check valves on start up and shut down. Accepted by XL Gap Services (formerly IRI) and FM for "proof-of-closure"; Max switching-on duration not exceed 20 cycles/hr; Not for use with Butane Gas. VDK 200A S /4 NPT connection; max. Vol. 0,7 cu ft (20 liters) 120 Vac (+10%/-15%), 60 Hz, SPDT Sw 120 Vac, NEMA 12 Replaces VDK 200A S02 ( ) A FORMERLY: VDK 200A S /4 NPT connection; max. Vol. 0,7 cu ft (20 liters) O Replaced by PRIE ON REQUEST FORMERLY: VDK 200A S06 W/ BRAD /4 NPT connection; max. Vol. 0,7 cu ft (20 liters) A 120 Vac (+10%/-15%), 60 Hz, SPDT Sw 120 Vac, NEMA 12 Replaces VDK 200A S02 ( ) FORMERLY: BH PRIE ON REQUEST Products:

96 120 Valve Proving Systems, Pipe Mount VDK VDK 200A W/ BRAD HARRISON /4 NPT connection; max. Vol. 0,7 cu ft (20 liters) O 120 Vac (+10%/-15%), 60 Hz, SPDT Sw 120 Vac, NEMA 12 Replaced by BH FORMERLY: BH PRIE ON REQUEST Products:

97 120 Valve Proving Systems, Pipe Mount VDK Description The DUNGS VDK 200 is a valve proving system for safety shutoff valves. It checks that both safety shutoff valves in a gas train are fully closed before a system startup or after system shutdown when wired and interlocked to a suitable flame safeguard control. The VDK 200 will halt the startup sequence to a piece of gas burning equipment if it detects an open safety shutoff valve, thus preventing ignition under undesirable conditions. Application Version The DUNGS VDK 200 is recommended for industrial and commercial heating applications. where E approval is required. The VDK 200 is the means for proof of closure and normally open vent line alternative. The VDK 200 is required for E compliance on system with capacities of 4.1 Mbtu and up. The VDK 200 is suitable for natural gas, propane, air and other inert gases. Not suitable for butane gas. Harmonized ode: Specifications Max. operating pressure Electrical ratings (+10% / -15%) ontact rating Enclosure rating Electrical connection Operating time Ambient temperature rating 5 PSI (360 mbar) Vac/50 or 60 Hz Vac/50 or 60 Hz Run: / 230 Vac/50 Hz Alarm: / 230 Vac/50 Hz IP 40 Screw terminals with SO cord connection 100% duty cycle, max. 20 test cycles/hr +14 F to +140 F (-10 to +60 ) Aluminum body; test cycle approximately 26s; light indication for permissive or alarm conditions; Screw terminals with SO cord connection. European code requirements may vary. The DUNGS VDK meets EN code requirements for a leak tightness device as required for applications with capacities greater than 4,100,000 Btu. (1200 kw). VDK 200A S , mm Rp connections; max. Vol. 0,7 cu ft (20 liters) 110 Vac (+10%/-15%), 50 Hz, Run ontact 110 Vac /50 Hz; alarm ontact 110 Vac 50 Hz. IP 40 A FORMERLY: VDK 200A S , mm Rp connections; max. Vol. 0,7 cu ft (20 liters) 230 Vac (+10%/-15%), 50 Hz, Run ontact 200 Vac /50 Hz; alarm ontact 200 Vac 50 Hz. IP 40 A FORMERLY: VDK 200A S mm Rp connections; max. Vol. 0,7 cu ft (20 liters) O 230 Vac (+10%/-15%), Run ontact 200 Vac /50 Hz; alarm ontact 200 Vac 50 Hz. IP PRIE ON REQUEST FORMERLY: Products:

98 120 Valve Proving Systems, Panel Mount - VPM Description The DUNGS VPM-V is a valve module which can be used with any valve. It checks that both safety shutoff valves in a gas train are fully closed and tight before either a system startup and/or after system shutdown when wired and interlocked to a suitable flame safeguard control. The VPM V will halt the startup sequence for a gas burning equipment if it detects an open/untight safety shutoff valve, thus preventing ignition under undesirable conditions. Application The VPM-V is recommended for industrial and commercial heating applications. SomeVersion authorities having jurisdiction accept the VPM-V in lieu of proof of closure when integrated with the pre-ignition system and/or in lieu of a vent valve when it checks the valves at start up and shut down. The VPM-V is suitable for any type of gas and pressure as it is not in contact with the gas. It can be set by jumper for most standard values and can be programmed through a service box and software for other valves. It allows to comply with EN746-2 requirement of tightness testing up to the burner and allows counting the cycling of the valves as requested by NFPA 86. Requires the use of at least one pressure switch in between the safety valves and can be used with or without auxiliary valves depending on the application. SIL 2 Approved. VPM-V allows testing at start-up, shutdown or one valve per cycle. Link to the Datasheet Harmonized ode: Specifications Max. operating pressure Electrical ratings (+10% / -15%) ontact rating Enclosure rating Electrical connection Ambient temperature rating Not Applicable 120/230 Vac 50/60 Hz Valves output: 2A per valve Alarm: 1 A IP 42 Punch M16 connections -5 F to +140 F (-20 to +60 ) SA Pending, FM Pending, E (EN1643) Approved, SIL 2 Approved Upon request, wiring base can be sold separately per unit (259694) or by batch of 48 pieces (259695) VPM-V (Including Base) Vac (+10%/-15%), 50/ Vac. NEMA PRIE ON REQUEST FORMERLY: VPM-V (Including Base) Vac PRIE ON REQUEST FORMERLY: Products:

99 Gas & Air Pressure Switches Gas Pressure Switches Product Model Page Gas Pressure Switches, Modular Mount - A2 US 50.1 Gas Pressure Switches, Pipe Mount - A4 US 51.1 Gas Pressure Switches, Modular Mount - A2 EU 52.1 Gas Pressure Switches, Pipe Mount - A4 EU 53.1 Gas Pressure Switches, Modular Mount - A5 EU 54.1 Gas Pressure Switches, Pipe Mount - A6 EU 55.1 Gas Pressure Switches, GGAO A4 US 56.1 Air Pressure Switches Product Model Page Air Pressure Switches - AA-A1 US 60.1 Air Pressure Switches - AA-A2/A4 US 61.1 Air Pressure Switches - AA-2/A2-7 US 62.1 Air Pressure Switches - LGW-A2 EU 63.1 Air Pressure Switches - LGW-A4 EU 64.1

100 130 Gas Pressure Switches, Modular Mount - A2 Description The DUNGS GAO (Automatic Reset), GMH (High Manual Reset), and GML (Low Manual Reset) A2 pressure switches are compact pressure switches for DUNGS modular valve train components. A2 pressure switches are suitable for making and/or breaking a circuit when the medium pressure changes relative to the set point. The set point can be set in the field by an adjustable dial with an integrated scale. Application Version The DUNGS GAO, GMH, and GML A2 pressure switches are recommended for industrial and commercial heating applications with DUNGS DMV dual modular valves and DUNGS FRI modular pressure regulators. The GAO, GMH, and GML A2 pressure switches are suitable for natural gas, propane, butane, air and other inert gases. Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Max. operating pressure Electrical ratings Enclosure rating Ambient temperature rating GAO; GMH; and GML A2-4-2,3,4,5,6 7 PSI (500 mbar) GAO, GMH and GML A PSI (1000 mbar) Silver (Ag) contact ratings A 10A 120 Vac A 8A 120 Vac D min Vdc D max Vdc NEMA Type 4-40 F to +140 F (-40 to +60 ) Series ending in -2,-3,-5 and F to +140 F (-30 to +60 ) Series ending in -8 Mounts directly to DMV, FRI and Flanges; use adapter (214975) for DMV downstream [Port 3] alibrated for vertical mounting, set point may change by 0.2 W.. when mounted otherwise; Screw terminals with 1/2 NPT onduit connection; Neon light included. Mounting kit (2 screws and O-ring included) GAO-A to 1.2 W.; High or Low; Automatic reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A GAO-A to 4.0 W.; High or Low; Automatic reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A GAO-A to 20 W.; High or Low; Automatic reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A Products:

101 130 Gas Pressure Switches, Modular Mount - A2 GAO-A to 60 W.; High or Low; Automatic reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A GAO-A to 200 W.; High or Low; Automatic reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A GMH-A to 20 W.; High; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A GMH-A to 60 W.; High; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A GMH-A to 200 W.; High; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A GML-A to 20 W.; Low; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A GML-A to 60 W.; Low; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A GML-A to 200 W.; Low; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A Products:

102 130 Gas Pressure Switches, Pipe Mount - A4 Description The DUNGS GAO (Automatic Reset), GMH (High Manual Reset), and GML (Low Manual Reset) A4 pressure switches are adjustable pressure switches for automatic gas burning equipment controls. A4 pressure switches are suitable for making and/or breaking a circuit relative to changes in medium pressure relative to the set point. The set point can be set in the field by an adjustable dial with an integrated scale. Test nipple integrated in metal housing to verify setpoint. Version Application The DUNGS GAO, GMH, and GML A4 pressure switches are recommended for industrial and commercial heating applications with 1/4 NPT pipe connections. The GAO, GMH, and GML A4 pressure switch is suitable for natural gas, propane, butane, air and other inert gases. Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Max. operating pressure Electrical ratings Enclosure rating Ambient temperature rating GAO; GMH; and GML A4-4-2,3,4,5,6 7 PSI (500 mbar) GAO, GMH and GML A PSI (1000 mbar) Silver (Ag) contact ratings Gold (Au) contact ratings A 10A 120 Vac D min. 5 5 Vdc A 8A 120 Vac D max. 10m 24 Vdc D min Vdc D max Vdc NEMA Type 4-40 F to +140 F (-40 to +60 ) Series ending in -2,-3,-5 and F to +140 F (-30 to +60 ) Series ending in -8 Pipe mount; alibrated for vertical mounting, set point may change by 0.2 W.. when mounted otherwise; Screw terminals with 1/2 NPT onduit connection; Neon light included. GAO-A to 1.2 W.; High or Low; Automatic reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A GAO-A to 4 W.; High or Low; Automatic reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A GAO-A to 20 W.; High or Low; Automatic reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 FORMERLY: A A Products:

103 130 Gas Pressure Switches, Pipe Mount - A4 GAO-A to 60 W.; High or Low; Automatic reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 A FORMERLY: A 0.27 GAO-A to 200 W.; High or Low; Automatic reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 A FORMERLY: A 0.27 GAO-A4-4-2GOLD to 1.2 W.; High or Low; Automatic reset SPDT Sw 24 Vdc, Gold Plated ontacts, NEMA Type 4 FORMERLY: A O PRIE ON REQUEST GAO-A4-4-3GOLD to 4 W.; High or Low; Automatic reset SPDT Sw 24 Vdc, Gold Plated ontacts, NEMA Type 4 B FORMERLY: A 0.27 GAO-A4-4-5GOLD to 20 W.; High or Low; Automatic reset SPDT Sw 24 Vdc, Gold Plated ontacts, NEMA Type 4 B FORMERLY: A 0.27 GAO-A4-4-6GOLD to 60 W.; High or Low; Automatic reset SPDT Sw 24 Vdc, Gold Plated ontacts, NEMA Type 4 B FORMERLY: A 0.27 GAO-A4-4-8GOLD to 200 W.; High or Low; Automatic reset SPDT Sw 24 Vdc, Gold Plated ontacts, NEMA Type 4 B FORMERLY: A 0.27 GMH-A to 20 W.; High; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 A FORMERLY: A 0.27 Products:

104 130 Gas Pressure Switches, Pipe Mount - A4 GMH-A to 60 W.; High; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 A FORMERLY: A 0.27 GMH-A to 200 W.; High; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 A FORMERLY: A 0.27 GMH-A4-4-4GOLD to 20 W.; High; Manual reset SPDT Sw 24 Vdc, Gold Plated ontacts, NEMA Type 4 B FORMERLY: A 0.27 GMH-A4-4-6GOLD 12 to 60 W.; High; Manual reset SPDT Sw 24 Vdc, Gold Plated ontacts, NEMA Type 4 FORMERLY: A O PRIE ON REQUEST GML-A to 20 W.; Low; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 A FORMERLY: A 0.27 GML-A to 60 W.; Low; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 A FORMERLY: A 0.27 GML-A to 200 W.; Low; Manual reset SPDT Sw 120 Vac 8A FLA, NEMA Type 4 A FORMERLY: A 0.27 GML-A4-4-4GOLD to 20 W.; Low; Manual reset SPDT Sw 24 Vdc, Gold Plated ontacts, NEMA Type 4 B FORMERLY: A 0.27 Products:

105 130 Gas Pressure Switches, Modular Mount - A2 Description The DUNGS GW (Automatic Reset), UB (High Manual Reset), and NB (Low Manual Reset) A2 pressure switches are compact pressure switches for DUNGS modular valve train components. A2 pressure switches are suitable for making and/or breaking a circuit when the medium pressure changes relative to the set point. The set point can be set in the field by an adjustable dial with an integrated scale. Application Version The DUNGS GW, UB, and NB A2 pressure switches are recommended for industrial and commercial heating applications with DUNGS DMV dual modular valves and DUNGS FRI modular pressure regulators. Various mounting options allow direct mounting on the housing. The GW, UB, and NB A2 pressure switches are suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. operating pressure Electrical ratings Enclosure rating Ambient temperature rating GW, UB, NB A2 7 PSI (500 mbar) Silver (Ag) contact ratings A 6A 230 Vac A 3A 230 Vac D min Vdc D max Vdc IP F to +140 F (-15 to +60 ) Mounts directly to DMV, FRI and Flanges; use adapter (214975) for DMV downstream [Port 3] alibrated for vertical mounting, set point may change by 0.8 mbar. when mounted otherwise; Screw terminals with SO cord connection. GW 3 A A 0.4 to 3 mbar; High or Low; Automatic reset O SPDT Sw 250 Vac 3A FLA,IP 54 Replaced by A PRIE ON REQUEST GW 10 A A 1 to 10 mbar; High or Low; Automatic reset O SPDT Sw 250 Vac 3A FLA,IP 54 Replaced by A PRIE ON REQUEST GW 50 A A 2.5 to 50 mbar; High or Low; Automatic reset O SPDT Sw 250 Vac 3A FLA,IP 54 Replaced by A PRIE ON REQUEST Products:

106 130 Gas Pressure Switches, Modular Mount - A2 GW 150 A A 5 to 150 mbar; High or Low; Automatic reset O SPDT Sw 250 Vac 3A FLA,IP 54 Replaced by A PRIE ON REQUEST GW 500 A A 100 to 500 mbar; High or Low; Automatic reset O SPDT Sw 250 Vac 3A FLA,IP 54 Replaced by A PRIE ON REQUEST UB 50 A2 2.5 to 50 mbar; High; Manual reset SPDT Sw 250 Vac 3A FLA,IP 54 FORMERLY: A UB 150 A2 30 to 150 mbar; High; Manual reset SPDT Sw 250 Vac 3A FLA,IP 54 FORMERLY: A UB 500 A2 100 to 500 mbar; High; Manual reset SPDT Sw 250 Vac 3A FLA,IP 54 FORMERLY: A NB 50 A2 2.5 to 50 mbar; Low; Manual reset SPDT Sw 250 Vac 3A FLA,IP 54 FORMERLY: A NB 150 A2 30 to 150 mbar; Low; Manual reset SPDT Sw 250 Vac 3A FLA,IP 54 FORMERLY: A NB 500 A2 100 to 500 mbar; Low; Manual reset SPDT Sw 250 Vac 3A FLA,IP 54 FORMERLY: A B B B B B B Products:

107 130 Gas Pressure Switches, Pipe Mount - A4 Description The DUNGS GW (Automatic Reset), UB (High Manual Reset), and NB (Low Manual Reset) A4 pressure switches are adjustable pressure switches for automatic gas burning equipment controls. A4 pressure switches are suitable for making and/or breaking a circuit relative to changes in medium pressure relative to the set point. The set point can be set in the field by an adjustable dial with an integrated scale. Test nipple integrated in metal housing to verify setpoint. Version Application The GW, UB, and NB A4 pressure switch is recommended for industrial and commercial heating, ventilation, and air-conditioning systems with G 1/4 female pipe connections. The GW, UB, and NB A4 pressure switch is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. operating pressure Electrical ratings Enclosure rating Ambient temperature rating GW, UB, NB A4 7 PSI (500 mbar) Silver (Ag) contact ratings A 6A 230 Vac A 3A 230 Vac D min Vdc D max Vdc IP F to +140 F (-15 to +60 ) Pipe mount; alibrated for vertical mounting, set point may change by 0.8 mbar when mounted otherwise; Screw terminals with SO cord connection. GW 3A A 0.4 to 3 mbar; High or Low; Automatic reset O SPDT Sw 230 Vac 3A FLA,IP 54 Replaced by A PRIE ON REQUEST GW 10 A A 1 to 10 mbar; High or Low; Automatic reset O SPDT Sw 230 Vac 3A FLA,IP 54 Replaced by A PRIE ON REQUEST GW 50 A to 50 mbar; High or Low; Automatic reset O SPDT Sw 230 Vac 3A FLA,IP 54 Replaced by A FORMERLY: A PRIE ON REQUEST Products:

108 130 Gas Pressure Switches, Pipe Mount - A4 GW 150 A A 30 to 150 mbar; High or Low; Automatic reset O SPDT Sw 230 Vac 3A FLA,IP 54 Replaced by A PRIE ON REQUEST GW 500 A A 100 to 500 mbar; High or Low; Automatic reset O SPDT Sw 230 Vac 3A FLA,IP 54 Replaced by A PRIE ON REQUEST UB 50 A4 2.5 to 50 mbar; High; Manual reset SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A UB 150 A4 30 to 150 mbar; High; Manual reset SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A UB 500 A4 100 to 500 mbar; High; Manual reset SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A NB 50 A4 2.5 to 50 mbar; Low; Manual reset SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A NB 150 A4 30 to 150 mbar; Low; Manual reset SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A NB 500 A4 100 to 500 mbar; Low; Manual reset SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A B B B B B B Products:

109 130 Gas Pressure Switches, Modular Mount - A5 Description The DUNGS GW (Automatic Reset) A5 pressure switches are compact pressure switches for DUNGS modular valve train components. A5 pressure switches are suitable for making and/or breaking a circuit when the medium pressure changes relative to the set point. The set point can be set in the field by an adjustable dial with an integrated scale. Application The DUNGS GW A5 pressure switches are recommended for industrial and commercialversion heating applications with DUNGS DMV dual modular valves and DUNGS FRI modular pressure regulators. Various mounting options allow direct mounting on the housing. The GW A5 pressure switches are suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. operating pressure Electrical ratings Enclosure rating Ambient temperature rating GW A5 7 PSI (500 mbar) Silver (Ag) contact ratings A 6A 230 Vac A 3A 230 Vac D min Vdc D max Vdc IP F to +160 F (-15 to +70 ) Mounts directly to DMV, FRI and Flanges; use adapter (214975) for DMV downstream [Port 3] alibrated for vertical mounting, set point may change by 0.8 mbar. when mounted otherwise; DIN connector with screw terminals with SO cord connection. GW 3 A to 3 mbar; High or Low; Automatic reset SPDT Sw 250 Vac 3A FLA,IP 54 FORMERLY: A B GW 10 A to 10 mbar; High or Low; Automatic reset SPDT Sw 250 Vac 3A FLA,IP 54 FORMERLY: A B GW 50 A to 50 mbar; High or Low; Automatic reset SPDT Sw 250 Vac 3A FLA,IP 54 FORMERLY: A B Products:

110 130 Gas Pressure Switches, Modular Mount - A5 GW 150 A to 150 mbar; High or Low; Automatic reset SPDT Sw 250 Vac 3A FLA,IP 54 FORMERLY: A B GW 500 A to 500 mbar; High or Low; Automatic reset SPDT Sw 250 Vac 3A FLA,IP 54 FORMERLY: A B Products:

111 130 Gas Pressure Switches, Pipe Mount - A6 Description The DUNGS GW (Automatic Reset) A6 pressure switches are adjustable pressure switches for automatic burner controls. A6 pressure switches are suitable for making and/or breaking a circuit relative to changes in medium pressure relative to the set point. The set point can be set in the field by an adjustable dial with an integrated scale. Test nipple integrated in metal housing to verify setpoint. Application Version The GW A6 pressure switch is recommended for industrial and commercial heating, ventilation, and air-conditioning systems with G 1/4 female pipe connections. The GW A6 pressure switch is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. operating pressure Electrical ratings Enclosure rating Ambient temperature rating GW A6 7 PSI (500 mbar) Silver (Ag) contact ratings A 6A 230 Vac A 3A 230 Vac D min Vdc D max Vdc IP F to +160 F (-15 to +70 ) Pipe mount; alibrated for vertical mounting, set point may change by 0.8 mbar when mounted otherwise; DIN connector with screw terminals with SO cord connection. GW 3 A to 3 mbar; High or Low; Automatic reset SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A B GW 10 A to 10 mbar; High or Low; Automatic reset SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A B GW 50 A to 50 mbar; High or Low; Automatic reset SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A B Products:

112 130 Gas Pressure Switches, Pipe Mount - A6 GW 150 A to 150 mbar; High or Low; Automatic reset SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A B GW 500 A to 500 mbar; High or Low; Automatic reset SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A B Products:

113 130 Gas Pressure Switches, GGAO A4 Description The DUNGS GGAO A4 pressure switches are adjustable differential pressure switches for automatic gas burning equipment controls. GGAO pressure switches are suitable for making and/or breaking a circuit relative to changes in the difference of pressure between two medium (Air/Gas / Gas/Gas) relative to the set point. The set point can be set in the field by an adjustable dial with an integrated scale. Test nipple integrated in metal housing to verify setpoint. Version Application The DUNGS GGAO A4 differential pressure switches are recommended for industrial and commercial heating applications with 1/4 NPT pipe connections on one side and 1/8" NPT on the other connection. Those switches can be used for monitoring the air/gas differential pressure in premix systems or the pressure drops in gas filters. The GGAO pressure switch is suitable for natural gas, propane, butane, air and other inert gases. They all come with gold contacts for use in low or high voltage systems. Harmonized ode: Specifications Max. operating pressure Electrical ratings Enclosure rating Ambient temperature rating GGAO A4-4-2,3,4,5,6 7 PSI (500 mbar) Gold (Au) contact ratings A xa 120 Vac D min. x 5 Vdc D min. 24 Vdc D max. x 48 Vdc NEMA Type 4-40 F to +140 F (-40 to +60 ) Series ending in -2,-3,-5 and -6 Pipe mount; alibrated for vertical mounting, set point may change by 0.2 W.. when mounted otherwise; Screw terminals with 1/2 NPT onduit connection; Neon light optional GGAO-A W Automatic Reset Differential Switches 1/4 NPT / 1/8 NPT GGAO-A W Automatic Reset Differential Switches 1/4 NPT / 1/8 NPT GGAO-A W Automatic Reset Differential Switches 1/4 NPT / 1/8 NPT NP NP NP 130 Products:

114 130 Gas Pressure Switches, GGAO A4 GGAO-A W Automatic Reset Differential Switches 1/4 NPT / 1/8 NPT NP 130 Products:

115 130 Air Pressure Switches - AA-A1 Description the DUNGS AA...A1 differential pressure switches are factory adjustable (within listed pressure range), compact pressure switches for automatic gas burning equipment controls. Available with hose connections. AA...A1 differential pressure switches are suitable for making and/or breaking a circuit when the medium pressure changes relative to the set point. Application Version Differential pressure monitoring in firing, ventilation and air-conditioning systems. The AA...A1 can be used as a pressure, vacuum or differential pressure switch for air and non-aggressive gases. Not suitable for natural gas, propane, butane, and other combustible gases. Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Max. operating pressure Electrical ratings Ambient temperature rating AA...A1 1.5 PSI (103 mbar) Silver (Ag) contact ratings A 5A 120 Vac A 3A 120 Vac D min Vdc D max Vdc -40 F to +140 F (-40 to +60 ) Air pressure switch for differential, vacuum or positive pressure; with automatic reset; 0.16 (4 mm) diameter hose connections; screw adjustable setpoint; 1/4" x 1/32" (6.3 x 0.8 mm) flat male terminals. AA-A to 1.2 W. SPDT Sw 120 Vac 3A FLA FORMERLY: A AA-A to 4 W. SPDT Sw 120 Vac 3A FLA FORMERLY: A AA-A to 20 W. SPDT Sw 120 Vac 3A FLA FORMERLY: A B B Products:

116 130 Air Pressure Switches - AA-A1 AA-A to 60 W. SPDT Sw 120 Vac 3A FLA A AA-A to 1.2 W. SPDT Sw 120 Vac 3A FLA Includes contact cover FORMERLY: A A AA-A to 4 W. SPDT Sw 120 Vac 3A FLA Includes contact cover FORMERLY: A B AA-A to 20 W. SPDT Sw 120 Vac 3A FLA Includes contact cover FORMERLY: A B AA-A A to 60 W. SPDT Sw 120 Vac 3A FLA Includes contact cover B Products:

117 130 Air Pressure Switches - AA-A2/A4 Description the DUNGS AA...A2/A4 differential pressure switches are field adjustable, compact pressure switches for automatic gas burning equipment controls. Available with hose or NPT threaded connections. AA...A2/A4 differential pressure switches are suitable for making and/or breaking a circuit when the medium pressure changes relative to the set point. Application Version Differential pressure monitoring in firing, ventilation and air-conditioning systems. The AA... A2/A4 can be used as a pressure, vacuum or differential pressure switch for air and nonaggressive gases. Not suitable for natural gas, propane, butane and other combustible gases. * A4 Models FM Approved Only Harmonized ode: Specifications Max. operating pressure Electrical ratings Enclosure rating Ambient temperature rating Link to the Datasheet Link to the User Manual AA...A2/A4 7 PSI (500 mbar) Silver (Ag) contact ratings A 5A 120 Vac A 3A 120 Vac D min Vdc D max Vdc NEMA Type 4-40 F to +140 F (-40 to +60 ) Air pressure switch for differential, vacuum or positive pressure; with automatic reset; AA-A2-4 features 0.16 (4 mm) diameter hose connections; AA-A2-6 features 1/4 NPT positive connection and 1/8 NPT negative connection and includes a test button in the lower housing; both models feature field adjustable setpoint; AA-A4-4 models feature 1/4 NPT positive connection and 1/8 NPT negative connection with Die ast Aluminum Base; 1/4" x 1/32" (6.3 x 0.8 mm) flat male terminals. AA-A to 1.2 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A A AA-A to 4 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A A AA-A to 20 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A A Products:

118 130 Air Pressure Switches - AA-A2/A4 AA-A to 60 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A A AA-A to 1.2 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A A AA-A to 4 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A A AA-A to 20 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A A AA-A to 60 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A A AA-A to 1.2 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A B AA-A to 4 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A B AA-A to 20 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A A Products:

119 130 Air Pressure Switches - AA-A2/A4 AA-A to 60 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A B Products:

120 130 Air Pressure Switches - AA-2/A2-7 Description The DUNGS AA...2/A2-7 differential pressure switches are field adjustable, compact pressure switches for automatic gas burning equipment controls. AA...2/A2-7 differential pressure switches are suitable for making and/or breaking a circuit when the medium pressure changes relative to the set point. The set point can be set in the field by the adjustable dial and an integrated scale. Application Version Differential pressure monitoring in firing, ventilation and air-conditioning systems. The AA... 2/A2-7 can be used as a pressure, vacuum or differential pressure switch for air and nonaggressive gases. Not suitable for natural gas, propane, butane and other combustible gases. Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Max. operating pressure Electrical ratings Enclosure rating Ambient temperature rating AA PSI (50 mbar) AA PSI (103 mbar) Silver (Ag) contact ratings AA-2 A 5A 120 Vac / AA-7 4A 120 Vac AA-2 A 3A 120 Vac / AA-7 2A 120 Vac D min. 20 ma D max. 1 A NEMA Type 4-40 F to +140 F (-40 to +60 ) Hose mount; air pressure switch for differential, vacuum or positive pressure; field adjustable setpoint; Screw terminals with 1/2 NPT onduit connection. AA to 0.6 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A AA to 1.2 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A AA to 4 W. SPDT Sw 120 Vac 3A FLA, NEMA Type 4 FORMERLY: A Products:

121 130 Air Pressure Switches - LGW-A2 Description The DUNGS LGW...A2 differential pressure switches are field adjustable, compact pressure switches for automatic gas burning equipment controls. Available with hose or G threaded connections. LGW...A2 differential pressure switches are suitable for making and/or breaking a circuit when the medium pressure changes relative to the set point. LGW...A2 versions feature hose connections. LGW...A2P versions feature G threaded connections and a test button in the lower housing. Version Application Differential pressure monitoring in firing, ventilation and air-conditioning systems. The LGW... A2 can be used as a pressure, vacuum or differential pressure switch for air and nonaggressive gases. Not suitable for natural gas, propane, butane and other combustible gases. Harmonized ode: Specifications Max. operating pressure Electrical ratings Enclosure rating Ambient temperature rating LGW...A2 7 PSI (500 mbar) Silver (Ag) contact ratings A 6A 230 Vac A 3A 230 Vac D min. 20 ma D max. 1 A IP F to +140 F (-15 to +60 ) Air pressure switch for differential, vacuum or positive pressure; with automatic reset; LGW-A2 features 4 mm (0.16 ) diameter hose connections; LGW-A2P features G1/4 positive connection and G1/8 negative connection; screw adjustable setpoint; Screw terminals with SO cord connection. LGW 3 A2 0.4 to 3 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A LGW 10 A2 1 to 10 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A LGW 50 A2 2.5 to 50 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A B B B Products:

122 130 Air Pressure Switches - LGW-A2 LGW 150 A2 30 to 150 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A LGW 3 A2P 0.4 to 3 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A LGW 10 A2P 1 to 10 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A LGW 50 A2P 2.5 to 50 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A LGW 150 A2P 30 to 150 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A B B B B B Products:

123 130 Air Pressure Switches - LGW-A4 Description The DUNGS LGW...A4 differential pressure switches are field adjustable, compact pressure switches for automatic gas burning equipment controls. Available with RP threaded connections. LGW...A4 differential pressure switches are suitable for making and/or breaking a circuit when the medium pressure changes relative to the set point. Application Differential pressure monitoring in firing, ventilation and air-conditioning systems. The LGW... Version A4 can be used as a pressure, vacuum or differential pressure switch for air and nonaggressive gases. Not suitable for natural gas, propane, butane and other combustible gases. Harmonized ode: Specifications Max. operating pressure Electrical ratings Enclosure rating Ambient temperature rating LGW...A4 7 PSI (500 mbar) Silver (Ag) contact ratings A 6A 230 Vac A 3A 230 Vac D min. 20 ma D max. 1 A IP F to +140 F (-15 to +60 ) Thread onnection; Air pressure switch for differential, vacuum or positive pressure; with automatic reset; Screw terminals with SO cord connection. LGW 3 A4 0.4 to 3 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A LGW 10 A4 1 to 10 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A LGW 50 A4 2.5 to 50 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A B B B Products:

124 130 Air Pressure Switches - LGW-A4 LGW 150 A4 30 to 150 mbar SPDT Sw 230 Vac 3A FLA,IP 54 FORMERLY: A B Products:

125 Gas Pressure Regulators Product Model Page Modular Pressure Regulators- FRI US/EU 70.1 Stand Alone Pressure Regulators - 7 PSI - FRS US 71.1 Stand Alone Pressure Regulators - 10 PSI - FRS US 72.1 Line Pressure Regulators - 10 PSI - FRS US 73.1 Stand Alone Pressure Regulators - Flanged - FRS US/EU 74.1 Stand Alone Pressure Regulators - 500mbar - FRS EU 75.1 Proportionators / Zero Governor - FRG US/EU 76.1 Proportionators / Zero Governor - FRNG EU 77.1 Proportionators / Zero Governor - Flanged - FRNG US/EU 78.1

126 140 Modular Pressure Regulators - FRI Description The DUNGS FRI/6 pressure regulator is a spring-loaded pressure regulator with adjustable setpoint spring. Internal sensor for regulating output pressure and a 50 micron gas filter installed upstream all in one housing. - With mounting kit, FRI/6 pressure regulator with gas filter directly mounts upstream or downstream of the DMV (Dual Modular Valve). - Lock-up Type Regulator Version - Vent limiter; approved as a vent-less regulator by some authorities having jurisdiction. (Review applicable codes for vent line requirements) Application The DUNGS FRI/6 is recommended for industrial and commercial heating applications and is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. operating pressure Input pressure range Output pressure range Gas filter (standard) Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart 7 PSI (500 mbar) E; 5 PSI (360 mbar) SA 2 to 200 in. W.. (5 mbar to 500 mbar) 1 to 80 in. W.. (2.5 mbar to 200 mbar); adjustable with different springs 50 micron; replaceable +5 F to +150 F for up to 7 PSI for regulating behavior (+/- 10% of setpoint). -40 F to +150 F: Diaphragms are suitable for the low temperature, but there may be out of range regulating behavior. SA ertified for -40 F to +150 F for up to 5 PSI. -15 to +70 applies to the E Marking. Aluminum body; Two G 1/8 downstream taps; one G 1/8 tap on top; mounts directly to DMV or stand alone with flanges. DMV Mounting kit and stand alone mounting kits included; Stand alone: flanges sold separately (same as used with DMV); Refer to selection guide for technical specifics, flow and pressure drop. Refer to spring guide for correct output pressure FRI 705/ /2",3/4", 1" NPT or Rp Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) A FORMERLY: FRI 707/ /2",3/4", 1" NPT or Rp Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) A FORMERLY: FRI 710/ ", 1 1/4", 1 1/2", 2" NPT or Rp Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) A FORMERLY: Products:

127 140 Modular Pressure Regulators - FRI FRI 712/ ", 1 1/4", 1 1/2", 2" NPT or Rp Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) A FORMERLY: Products:

128 141 Stand Alone Pressure Regulators - 7 PSI - FRS Description The DUNGS FRS 7../6 pressure regulator is a spring-loaded pressure regulator with adjustable setpoint spring. Internal sensor for regulating output pressure. - Input pressures up to 7 PSI (SA to 5 PSI) - High flow rate - Sturdy, precise and sensitive regulation of regulator output pressure - Lock-up Type Regulator Version - Vent limiter; approved as a vent-less regulator by some authorities having jurisdiction. (Review applicable codes for vent line requirements) Application The DUNGS FRS 7../6 pressure regulator is recommended for industrial and commercial heating applications and is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. operating pressure Input pressure range Output pressure range Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart 7 PSI (500 mbar) / SA 5 PSIG 2 to 200 in. W.. (5 mbar to 500 mbar) 1 to 80 in. W.. (2.5 mbar to 200 mbar); adjustable with different springs +5 F to +160 F for up to 10 PSI for regulating behavior (+/- 10% of setpoint) -40 F to +160 F for up to 5 PSI: Diaphragms are suitable for the low temperature, but there may be out of range regulating behavior. SA ertified for -40 F to +160 for up to 5 PSI. Aluminum body; Two upstream and downstream taps; one tap on top; optional external feedback connection; Refer to selection guide for technical specifics, flow and pressure drop. Refer to spring guide for correct output pressure. FRS 705/ /2 NPT Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) A FORMERLY: FRS 707/ /4 NPT Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) B FORMERLY: FRS 710/ NPT Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) A FORMERLY: Products:

129 141 Stand Alone Pressure Regulators - 7 PSI - FRS FRS 712/ /4 NPT Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) B FORMERLY: FRS 715/ /2 NPT Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) B FORMERLY: FRS 720/ NPT Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) B FORMERLY: FRS 725/ , /2 NPT Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) B FORMERLY: FRS 730/ , NPT Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) B FORMERLY: Products:

130 141 Stand Alone Pressure Regulators - 10 PSI - FRS Description The DUNGS FRS 7../6 pressure regulator is a spring-loaded pressure regulator with adjustable setpoint spring. Internal sensor for regulating output pressure. - Input pressures up to 10 PSI (SA to 5 PSI) - High flow rate - Sturdy, precise and sensitive regulation of regulator output pressure - Lock-up Type Regulator Version - Vent limiter; approved as a vent-less regulator by some authorities having jurisdiction. (Review applicable codes for vent line requirements) Application The DUNGS FRS 7../6 pressure regulator is recommended for industrial and commercial heating applications and is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. operating pressure Input pressure range Output pressure range Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart 10 PSI (500 mbar) SA 2 to 200 in. W.. (5 mbar to 500 mbar) 1 to 80 in. W.. (2.5 mbar to 200 mbar); adjustable with different springs +5 F to +160 F for up to 10 PSI for regulating behavior (+/- 10% of setpoint) -40 F to +160 F for up to 5 PSI: Diaphragms are suitable for the low temperature, but there may be out of range regulating behavior. SA ertified for -40 F to +160 for up to 5 PSI. Aluminum body; Two upstream and downstream taps; one tap on top; optional external feedback connection; Refer to selection guide for technical specifics, flow and pressure drop. Refer to spring guide for correct output pressure. FRS 705/6-10 PSI 1/2 NPT FRS 705/6 1/2 NPT 10PSIG PRESSURE REGULATOR SA 4-12" W SPRING 10 PSIG RATING FORMERLY: FRS 707/6-10 PSI 3/4 NPT FRS 707/6 3/4 NPT 10 PSIG PRESSURE REGULATOR SA 4-12" W SPRING 10 PSIG RATING FORMERLY: FRS 710/6-10 PSI 1 NPT FRS 710/6 1 NPT 10PSIG PRESSURE REGULATOR SA 4-12"W SPRING 10 PSIG RATING FORMERLY: A B A Products:

131 141 Stand Alone Pressure Regulators - 10 PSI - FRS FRS 712/6-10 PSI 1 1/4 NPT FRS 712/6 1-1/4 NPT 10 PSIG PRESSURE REGULATOR SA 4-12"W SPRING 10 PSIG RATING FORMERLY: FRS 715/6-10 PSI 1 1/2 NPT FRS 715/6 1-1/2 NPT 10 PSI PRESSURE REGULATOR SA 4-12" W SPRING 10 PSIG RATING FORMERLY: FRS 720/6-10 PSI 2 NPT FRS 720/6 2 NPT 10 PSIG PRESSURE REGULATOR SA 4-12" W SPRING 10PSIG RATING FORMERLY: FRS 725/6-10 PSI 2 1/2 NPT FRS 725/6 2-1/2 NPT 10PSIG PRESSURE REGULATOR SA 4-12" W SPRING 10 PSIG RATING FORMERLY: FRS 730/6-10 PSI 3 NPT FRS 730/6 3NPT 10PSIG PRESSURE REGULATOR SA 4-12" W SPRING 10 PSIG RATING FORMERLY: B B B , B , B Products:

132 141 Line Pressure Regulators - 10 PSI - FRS Description The DUNGS FRS 7../6 line pressure regulators, are a balancing type, spring-loaded regulator with an adjustable setpoint. They feature an internal sensor for regulating output pressure. - Input pressures up to 10 PSI (SA to 5 PSI) - High flow rate - Sturdy, precise and sensitive regulation of regulator output pressure - Lock-up Type Regulator Version - Vent limiter; approved as a vent-less regulator by some authorities having jurisdiction. (Review applicable codes for vent line requirements) Application The FRS series line pressure regulators are recommended for any application requiring a line regulator to drop inlet pressures to a lower pressure suitable for an appliance or equipment. Suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. operating pressure Input pressure range Output pressure range Ambient temperature rating Factory ertified for up to 10 PSI (700mbar) ANSI Z21.80 SA ertified for up to 5 PSI (350mbar) 2 to 200 W (5mbar - 500mbar) lass I 4-10 W. Includes 10 to 22 W OPD (Over Pressure Protection Device) lass II F to +160 F for up to 5 PSI for regulating behavior (+/- 10% of setpoint). -40 F to +160 F for up to 5 PSI: Diaphragms are suitable for the low temperature, but there may be out of range regulating behavior. Aluminum body; Two upstream and downstream taps; one tap on top; Refer to selection guide for technical specifics, flow and pressure drop. LINE REGULATOR 1/2" L1 OPD 1/2 NPT NPTF 4-10 W setting W OPD FORMERLY: LP1 LINE REGULATOR 3/4" L1 OPD 3/4 NPT NPTF 4-10 W setting W OPD FORMERLY: LP1 LINE REGULATOR 1" L1 OPD 1 NPT NPTF 4-10 W setting W OPD FORMERLY: LP , Products:

133 141 Line Pressure Regulators - 10 PSI - FRS LINE REGULATOR 1 1/4" L1 1 1/4 NPT NPTF 4-10 W setting W OPD FORMERLY: LP1 LINE REGULATOR 1 1/2" L1 1 1/2 NPT NPTF 4-10 W setting W OPD FORMERLY: LP1 LINE REGULATOR 2" L1 OPD 2 NPT NPTF 4-10 W setting W OPD FORMERLY: LP1 LINE REGULATOR 2 1/2" L1 2 1/2 NPT NPTF 4-10 W setting W OPD FORMERLY: LP1 LINE REGULATOR 3" L1 OPD 3 NPT NPTF 4-10 W setting W OPD FORMERLY: LP1 LINE REGULATOR 1/2" L2 1/2 NPT NPTF W setting FORMERLY: LP2 LINE REGULATOR 3/4" L2 3/4 NPT NPTF W setting FORMERLY: LP2 LINE REGULATOR 1" L2 1 NPT NPTF W setting FORMERLY: LP , , , , , Products:

134 141 Line Pressure Regulators - 10 PSI - FRS LINE REGULATOR 1 1/4" L2 1 1/4 NPT NPTF W setting FORMERLY: LP2 LINE REGULATOR 1 1/2" L2 1 1/2 NPT NPTF W setting FORMERLY: LP2 LINE REGULATOR 2" L2 2 NPT NPTF W setting FORMERLY: LP2 LINE REGULATOR 2 1/2" L2 2 1/2 NPT NPTF W setting FORMERLY: LP2 LINE REGULATOR 3" L2 3 NPT NPTF W setting FORMERLY: LP , , Products:

135 141 Stand Alone Pressure Regulators - Flanged - FRS Description The DUNGS FRS 5.../10 pressure regulator is a spring-loaded pressure regulator with adjustable setpoint spring. Internal sensor for regulating output pressure. - Input pressures up to 7 PSI (SA to 5 PSI) - High flow rate - Sturdy, precise and sensitive regulation of regulator output pressure - Lock-up Type Regulator Version - Vent limiter; approved as a vent-less regulator by some authorities having jurisdiction. (Review applicable codes for vent line requirements) - DIN PN16 Flange connections Application The DUNGS FRS 5.../10 pressure regulator is recommended for industrial and commercial heating applications and is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. operating pressure Input pressure range Output pressure range Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart 7 PSI (500 mbar) E; 5 PSI (360 mbar) SA 2 to 200 in. W.. (5 mbar to 500 mbar) 1 to 80 in. W.. (2.5 mbar to 150 mbar); adjustable with different springs +5 F to +160 F (-15 to +70 ) Aluminum body; Two upstream and downstream taps; one tap on top; Refer to selection guide for technical specifics, flow and pressure drop. Refer to spring guide for correct output pressure. FRS 5040 Internal Sensor DN. 40 Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) 1 1/2 nominal pipe size B FORMERLY: FRS 5050 Internal Sensor DN. 50 Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) 2 nominal pipe size B FORMERLY: FRS 5065 Internal Sensor , DN. 65 Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) 2 1/2 nominal pipe size B FORMERLY: Products:

136 141 Stand Alone Pressure Regulators - Flanged - FRS FRS 5080 Internal Sensor , DN. 80 Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) 3 nominal pipe size B FORMERLY: FRS 5100 Internal Sensor , DN. 100 Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) 4 nominal pipe size B FORMERLY: FRS 5125 Internal Sensor , DN. 125 Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) 5 nominal pipe size B FORMERLY: FRS 5150 Internal Sensor , DN. 150 Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) 6 nominal pipe size B FORMERLY: Products:

137 141 Stand Alone Pressure Regulators 500 mbar - FRS Description The DUNGS FRS 5../10 pressure regulator is a spring-loaded pressure regulator with adjustable setpoint spring. Internal sensor for regulating output pressure. - Input pressures up to 7 PSI (500 mbar) - High flow rate - Sturdy, precise and sensitive regulation of regulator output pressure - Vent limiter; approved as a vent-less regulator by some authorities having Version jurisdiction. (Review applicable codes for vent line requirements) Application The DUNGS FRS 5../10 pressure regulator is recommended for industrial and commercial heating applications and is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. operating pressure Input pressure range Output pressure range Ambient temperature rating 7 PSI (500 mbar) 2 to 200 in. W.. (5 mbar to 500 mbar) 1 to 80 in. W.. (2.5 mbar to 200 mbar); adjustable with different springs +5 F to +160 F (-15 to +70 ) Aluminum body; One upstream tap on each side; Refer to selection guide for technical specifics, flow and pressure drop. Refer to spring guide for correct output pressure. FRS /8 Rp Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) FORMERLY: FRS /2 Rp Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) FORMERLY: FRS /4 Rp Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) FORMERLY: Products:

138 141 Stand Alone Pressure Regulators 500 mbar - FRS FRS Rp Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) FORMERLY: FRS /2 Rp Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) FORMERLY: FRS Rp Outlet pressure ranges 1" to 80" W.. Standard spring 4" to 12" W.. (BLUE) FORMERLY: Products:

139 145 Proportionator / Zero Governor - FRG Description The DUNGS FRG 7../6 proportionator/zero governor has an adjustable setpoint spring and nonadjustable counterspring. The DUNGS FRG 7../6 is recommended for industrial and commercial heating applications. It is suitable for natural gas, propane, butane, air and other inert gases. Application (Proportionator) Holds a constant gas/air ratio by varying gas flow to a gas burning piece of equipment inversion proportion to combustion air flow. Adjustable ratio for excess gas or air operation. Application (Zero Governor) ontrols fuel by reducing incoming gas pressure to zero or adjustable to slightly above or below atmospheric pressure. Harmonized ode: Specifications Proportionator Max. operating pressure Optimal input pressure range Output pressure range Ambient temperature rating Specifications Zero Governor Max. operating pressure Optimal input pressure range Output pressure range Ambient temperature rating Link to the Datasheet Link to the User Manual Link to the Flow hart 7 PSI (500 mbar); 5 PSI (360 mbar) SA 2 to 82 in. W.. (5 to 200 mbar) 4 to 60 in. W.. (10 to 150 mbar) +5 F to +160 F (-15 to +70 ) 7 PSI (500 mbar) (5 PSI SA) 2 to 20 in. W.. (5 to 50 mbar) -2 to 2 in. W.. (-5 to 5 mbar) +5 F to +160 F (-15 to +70 ) Aluminum body; Two upstream and downstream taps; air impulse line on top; Refer to selection guide for technical specifics, flow and pressure drop. Optional low fire bypass (part # ) for 705/6, 707/6, 710/6, 712/6, 715/6, 720/6. FRG 705/ /2" NPT Refer to sales brochure for specific output ranges FORMERLY: A FRG 707/ /4" NPT Refer to sales brochure for specific output ranges FORMERLY: A FRG 710/ " NPT Refer to sales brochure for specific output ranges FORMERLY: A Products:

140 145 Proportionator / Zero Governor - FRG FRG 712/ /4" NPT Refer to sales brochure for specific output ranges FORMERLY: A FRG 715/ /2" NPT Refer to sales brochure for specific output ranges FORMERLY: A FRG 720/ " NPT Refer to sales brochure for specific output ranges FORMERLY: A FRG 725/ , /2" NPT Refer to sales brochure for specific output ranges FORMERLY: A FRG 730/ , " NPT Refer to sales brochure for specific output ranges FORMERLY: A Products:

141 145 Proportionator / Zero Governor - FRNG Description The DUNGS FRNG 5../10 proportionator/zero governor has an adjustable setpoint spring and nonadjustable counterspring. The DUNGS FRNG 5../10 is recommended for industrial and commercial heating applications. It is suitable for natural gas, propane, butane, air and other inert gases. Application (Proportionator) Holds a constant gas/air ratio by varying gas flow to a gas burning piece of equipment inversion proportion to combustion air flow. Adjustable ratio for excess gas or air operation. Application (Zero Governor) ontrols fuel by reducing incoming gas pressure to zero or adjustable to slightly above or below atmospheric pressure. Harmonized ode: Specifications Proportionator Max. operating pressure Optimal input pressure range Output pressure range Ambient temperature rating Specifications Zero Governor Max. operating pressure Optimal input pressure range Output pressure range Ambient temperature rating 7 PSI (500 mbar) 2 to 82 in. W.. (5 to 200 mbar) 0 to 60 in. W.. (10 to 150 mbar) +5 F to +160 F (-15 to +70 ) 7 PSI (500 mbar) 2 to 20 in. W.. (5 to 50 mbar) -1.2 to 2 in. W.. (-3 to 5 mbar) +5 F to +160 F (-15 to +70 ) Aluminum body; Two upstream and downstream taps; air impulse line on top; Refer to selection guide for technical specifics, flow and pressure drop. Optional low fire bypass for 3/8-2 (225256). FRNG RP 3/8" Refer to sales brochure for specific output ranges FORMERLY: FRNG /2 RP Refer to sales brochure for specific output ranges FORMERLY: FRNG /4 RP Refer to sales brochure for specific output ranges FORMERLY: Products:

142 145 Proportionator / Zero Governor - FRNG FRNG RP Refer to sales brochure for specific output ranges FORMERLY: FRNG /2 RP Refer to sales brochure for specific output ranges FORMERLY: FRNG RP Refer to sales brochure for specific output ranges FORMERLY: Products:

143 145 Proportionator / Zero Governor - Flanged - FRNG Description The DUNGS Flanged FRNG proportionator/zero governor has an adjustable setpoint spring and nonadjustable counterspring. The DUNGS Flanged FRNG is recommended for industrial and commercial heating applications. It is suitable for natural gas, propane, butane, air and other inert gases. Application (Proportionator) Holds a constant gas/air ratio by varying gas flow to a gas burning piece of equipment inversion proportion to combustion air flow. Adjustable ratio for excess gas or air operation. Application (Zero Governor) ontrols fuel by reducing incoming gas pressure to zero or adjustable to slightly above or below atmospheric pressure. Harmonized ode: Specifications Proportionator Max. operating pressure Optimal input pressure range Output pressure range Ambient temperature rating Specifications Zero Governor Max. operating pressure Optimal input pressure range Output pressure range Ambient temperature rating 7 PSI (500 mbar) 2 to 82 in. W.. (5 to 200 mbar) 0 to 60 in. W.. (10 to 150 mbar) -40 F to +160 F (-40 to +70 ) 7 PSI (500 mbar) 2 to 20 in. W.. (5 to 50 mbar) -1.2 to 2 in. W.. (-3 to 5 mbar) +5 F to +160 F (15 to +70 ) Aluminum body; Two upstream taps; air impulse line on top; Refer to selection guide for technical specifics, flow and pressure drop. FRNG DN. 40 Refer to sales brochure for specific output ranges. 1 1/2 nominal pipe size FORMERLY: FRNG DN. 50 Refer to sales brochure for specific output ranges. 2 nominal pipe size A FORMERLY: FRNG , DN. 65 Refer to sales brochure for specific output ranges. 2 1/2 nominal pipe size A FORMERLY: Products:

144 145 Proportionator / Zero Governor - Flanged - FRNG FRNG , DN. 80 Refer to sales brochure for specific output ranges. 3 nominal pipe size A FORMERLY: FRNG , DN. 100 Refer to sales brochure for specific output ranges. 4 nominal pipe size FORMERLY: FRNG , DN. 125 Refer to sales brochure for specific output ranges. 5 nominal pipe size FORMERLY: FRNG , DN. 150 Refer to sales brochure for specific output ranges. 6 nominal pipe size FORMERLY: Products:

145 Gas & Air Filters Product Model Page Gas & Air Filters - Threaded - GF EU 80.1 Pre-Mount Filters for DMV-D(LE) Series US/EU 80.2 Gas & Air Filters - Flanged - GF US/EU 81.1 Gas & Air Filters - High Pressure - VZF EU 82.1

146 170 Gas & Air Filters - Threaded - GF Description The DUNGS gas filter is designed for interior gas lines as per DIN 3386 with high dust storage capacity. Application Type GF/1 gas and air filter for protecting downstream fittings. Filter suitable for natural gas, propane, butane, air and other inert gases. Version Harmonized ode: Specifications Max. operating pressure Ambient temperature rating 7 PSI (500 mbar) 50 micron; replaceable +5 F to +176 F (-15 to +80 ) Aluminum body; Refer to selection guide for technical specifics, flow and pressure drop. GF 505 Rp 1/2 FORMERLY: GF 507 Rp 3/4 FORMERLY: GF 510 Rp 1 FORMERLY: Products:

147 170 Gas & Air Filters - Threaded - GF GF 515 Rp 1 1/2 FORMERLY: GF 520 Rp 2 FORMERLY: PRE-MOUNT FILTER Mount Gas Filter for DMV 507/701 FORMERLY: PRE-MOUNT FILTER Mount Gas Filter for DMV 512/520/702/703 FORMERLY: Products:

148 170 Gas & Air Filters - Flanged - GF Description The DUNGS gas filter is designed for interior gas lines as per DIN 3386 with high dust storage capacity. Flange connection as per DIN 2501 Part 1. Application Type GF/3 and GF/4 gas and air filter for protecting downstream fittings. Filter suitable for natural gas, propane, butane, air and other inert gases. Version Harmonized ode: Specifications Max. operating pressure Max. pressure difference Gas filter Ambient temperature rating 58 PSI (4 bar) 4 in. W.. (10 mbar), maximum recommended pressure difference in new condition 50 micron; replaceable +5 F to +176 F (-15 to +80 ) Aluminum body; Refer to selection guide for technical specifics, flow and pressure drop. GF40040/3 DN /2 nominal pipe size FORMERLY: GF40050/4 DN nominal pipe size FORMERLY: B GF40050/ DN. 50 O 2 nominal pipe size Replaced by FORMERLY: PRIE ON REQUEST Products:

149 170 Gas & Air Filters - Flanged - GF GF40065/4 DN /2 nominal pipe size FORMERLY: GF40065/3 DN /2 nominal pipe size Replaced by FORMERLY: GF40080/4 DN nominal pipe size FORMERLY: GF40080/3 DN nominal pipe size Replaced by FORMERLY: GF40100/4 DN nominal pipe size FORMERLY: GF40100/3 DN nominal pipe size Replaced by FORMERLY: GF40125 DN nominal pipe size FORMERLY: GF40150 DN nominal pipe size FORMERLY: B O 170 PRIE ON REQUEST B O 170 PRIE ON REQUEST B O 170 PRIE ON REQUEST , , Products:

150 170 Gas & Air Filters - High Pressures - VZF Description High pressure gas filter is designed for interior gas lines with high dust storage capacity. ISO Flange connection as per DIN 2501 Part 1. Application Type VZF gas and air filter for protecting downstream fittings. Filter suitable for natural gas, propane, butane, air and other inert gases. Version Harmonized ode: Specifications Max. operating pressure Max. pressure difference Gas filter Max. working temperature 230 PSI (16 bar) 7 PSI (500 mbar), maximum recommended pressure difference in new condition 99.5% filtration of 2 micron particles; replaceable - See gas filter accessories +160 F (+70 ) Aluminum body - DN25 (1 ) up to DN150 (6 ) DIN PN 16 or ANSI 150Lbs FLANGED; ontact DUNGS for selection guide & technical specifics. Models available for Biogas & Landfill gas applications. ontact DUNGS customer service for pricing & availability. VZF gas filter DN nominal pipe size FORMERLY: VZF gas filter DN nominal pipe size FORMERLY: VZF gas filter DN nominal pipe size FORMERLY: , , , Products:

151 170 Gas & Air Filters - High Pressures - VZF VZF gas filter DN nominal pipe size FORMERLY: VZF gas filter DN nominal pipe size FORMERLY: VZF gas filter DN nominal pipe size FORMERLY: VZF gas filter DN nominal pipe size FORMERLY: , , , , Products:

152 Modulating ontrol Valves and Motors Product Model Page Butterfl y ontrol Valves - DMK US/EU 90.1 Actuator - DMA US/EU 91.1

153 185 Butterfly ontrol Valves - DMK Description The DUNGS DMK butterfly control valve actuates from 0 to 90 degrees in either direction; it is not a tight shutoff valve. Inlet-side male thread and outlet-side female thread enable a space-saving assembly with direct mounting on most DUNGS shutoff valves. Application The DUNGS DMK is recommended for industrial and commercial heating applications for modulating gas or air supply to a piece of gas burning equipment. The DMK butterfly control Version valve is suitable for natural gas, propane, butane, air and other inert gases. Harmonized ode: Specifications Max. pressure Max. differential pressure Torque Ambient temperature Link to the Datasheet Link to the User Manual Link to the Flow hart 7 PSI (500 mbar) 1.5 PSI (100 mbar) Max. 4.4 in-lb (50 N cm) 0 F to +160 F (-15 to +70 ) Maximum pressure drop of 40 for optimum control required; Use with DUNGS DMA actuator; Required torque 12 in-lb; Screws directly to the downstream flange of the DMV; Refer to selection guide for technical specifics, flow and pressure drop; 5 business day lead time for assembly and mounting. NPT threaded product is UL listed. R/Rp threaded product has E mark. DMK 707/ mm Orifice 3/4" NPT male inlet connection, 3/4" NPT female outlet connection FORMERLY: DMK 710/ mm Orifice 1" NPT male inlet connection, 1" NPT female outlet connection FORMERLY: DMK 712/ mm Orifice 1 1/4" NPT male inlet connection, 1 1/4" NPT female outlet connection FORMERLY: Products:

154 185 Butterfly ontrol Valves - DMK DMK 715/ mm Orifice 1 1/2" NPT male inlet connection, 1 1/2" NPT female outlet connection FORMERLY: DMK 715/ mm Orifice 1 1/2" NPT male inlet connection, 1 1/2" NPT female outlet connection FORMERLY: DMK 720/ mm Orifice 2" NPT male inlet connection, 2" NPT female outlet connection FORMERLY: DMK mm Orifice R 3/4" male inlet connection, Rp 3/4" female outlet connection E Approved only FORMERLY: DMK mm Orifice R 3/4" male inlet connection, Rp 3/4" female outlet connection E Approved only FORMERLY: DMK mm Orifice R 1 1/4" male inlet connection, Rp 1 1/4" female outlet connection E Approved only FORMERLY: DMK mm Orifice R 1 1/4" male inlet connection, Rp 1 1/4" female outlet connection E Approved only FORMERLY: DMK mm Orifice R 1 1/2" male inlet connection, Rp 1 1/2" female outlet connection E Approved only FORMERLY: Products:

155 185 Butterfly ontrol Valves - DMK DMK mm Orifice R 1 1/2" male inlet connection, Rp 1 1/2" female outlet connection E Approved only FORMERLY: DMK mm Orifice R 2" male inlet connection, Rp 2" female outlet connection E Approved only FORMERLY: Products:

156 186 Actuator - DMA Description The DUNGS DMA actuator drives W from 0 to 90 via a 4-20 ma input signal. The DMA is available in three different fixed speeds: 6, 12, and 30 seconds. The DMA has one independent, field adjustable auxiliary SPDT switch and two field adjustable end of travel switches ma feedback can be used to drive a slave motor (3 actuators maximum) in parallel. Maximum stroke (Y Max; span) is adjustable from 25Ý to 90Ý, and minimum stroke (Y min; zero) is adjustable from 0Ý to 75% of set span. Version Application When mounted on the DUNGS DMK butterfly control valve, the DMA is used to automatically modulate the amount of natural gas, butane, propane and/or air supplied to a gas burning piece of equipment. Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Electrical ratings Power rating Enclosure rating Electrical connection Operation time Ambient temperature rating (End of Travel) Switches (ST) Auxiliary Switch (MV) VA Hz Holding: max. 2.0 VA; Operation: max. 5.4 VA NEMA Type 1 (NEMA Type 4 with optional cover D240456) Screw terminals with 1/2" NPT conduit connection 100 % duty cycle -15 F to +120 F (-10 to 50 ) Two field adjustable switches: min and Max: limit stroke of actuator. One SPDT, field adjustable switch. 1.5 A resistive, 1.5 A FLA, 9 A LRA, 120 Vac W Stroke as viewed from the bottom on increasing input signal. MTR DMA Second; 90 deg stroke; 12 in-lb torque 120 Vac (+10%/-15%) Hz; 20 VA; NEMA Type 1 B Replaces: MTR DMA Second; 90 deg stroke; 25 in-lb torque 120 Vac (+10%/-15%) Hz; 20 VA; NEMA Type 1 B Replaces: MTR DMA Second; 90 deg stroke; 27 in-lb torque 120 Vac (+10%/-15%) Hz; 20 VA; NEMA Type 1 B Replaces: Products:

157 186 Actuator - DMA MTR DMA 30B24 30 Second; 90 deg stroke; 27 in-lb torque B 24 Vac (+10%/-15%) Hz; 20 VA; NEMA Type PRIE ON REQUEST FORMERLY: Products:

158 Accessories Product Model Page Accessories Valve Position Indication US/EU Accessories Modular Valve US/EU Accessories Flanges US/EU Accessories Regulator / Gas & Air Filter US/EU Accessories Pressure Switch US/EU Accessories Replacement oils US/EU Accessories Replacement Printed ircuit Boards US/EU Accessories Other Product US/EU 107.1

159 Accessories Valve Position Indication Description The DUNGS PI 400 (closed position indicator) visually and electrically indicates when the valve is either open or closed. The PI 400 is suitable for making and/or breaking a circuit when the valve position changes. The DUNGS Visual Indicator visually indicates when the valve is either open or closed. Version The DUNGS K01/1 electrically indicates when the valve is either open or closed. The K01/1 is suitable for making and/or breaking a circuit when the valve position changes. The PI 400, Visual Indicator, and K01/1 mount directly to DUNGS automatic shutoff valves. Harmonized ode: ode requirements vary. FM requires visual indication on 1" and larger safety valves. The visual indicator, (VI) or the PI 400 (266968) meet this requirement. European code requirements for position indication vary. The DUNGS K01 (266893) switch meets EN1531 and EN 161 code requirements for closed position signal contact. VISUAL INDIATOR Visual Indicator UL Recognized, SA ertified and FM Approved A 0.30 FORMERLY: A 0.14 PI Interlock Switch with Visual Indication Polycarbonate Housing SPDT SW, 10A Res / 8A 120 Vac; NEMA Type 4; UL Recognized, SA ertified and FM Approved A 0.90 FORMERLY: A 0.41 Plunger PI Plunger PI 400 FORMERLY: Products:

160 Accessories Valve Position Indication K01/ G 1/8 thread connection SPDT, 5A Res / 3A 250 Vac IP 54; E FORMERLY: A A K01/ G 1/8 thread connection SPDT, 5A Res / 3A 250 Vac IP 65; E FORMERLY: A Products:

161 Accessories Modular Valve Description The DUNGS DMV is the main component of the DUNGS Modular Gas System may comprised of: 1 DMV combines two Automatic shutoff Valves in one housing 2 Flanges 1/2" to 2" NPT/Rp threaded 3 FRI Pressure Regulator with built in 50 micron Filter 4 GML manual reset Low Gas Pressure Switch 5 GMH manual reset High Gas Pressure Switch 6 GAO automatic reset High or Low Gas Pressure Switch 7 Visual Indicator 8 PI 400 losed Position Indicator Switch 9 Pilot Line onnector 10 VPS 504 Valve Proving System Version Harmonized ode: Various Refer to selection guide for technical specifics MOUNTING KIT DMV to FRI A Mounting Kit for FRI 705/707 to DMV 701/507 Body; Includes 4 bolts and 1 O-rings; packaged with FRI 0.50 FORMERLY: MOUNTING KIT DMV to FRI A Mounting Kit for FRI 710/712 to DMV 702/703, 510/ 512 Body; Includes 8 mounting bolts and 2 O-rings; packaged with FRI 0.50 FORMERLY: Stand-alone mounting kit FRI A Mounting Kit for FRI 705/707; Includes 8 mounting bolts and 2 O-rings; packaged with FRI. DMV 701 replacement O-ring and bolt kit 0.50 FORMERLY: Products:

162 Accessories Modular Valve Stand-alone Mounting kit FRI A Mounting Kit for FRI 710,/712; Includes 8 mounting bolts and 2 O-rings; packaged with FRI. DMV 702/703 replacement O-ring and bolt kit 0.50 FORMERLY: Burkert onnector for DMV & SV 4 Pins, black Allows a UL Recognized DMV valve to replace a UL Listed valve. Such a substitution is typically required for equipment UL Listed to UL 795. FORMERLY: A PRIE ON REQUEST DIN onnector for DMV Pins, black Used with DMV modular valves; Order and Price separately. A 0.20 FORMERLY: PG 11 ONDUIT ADAPTOR /2 NPT 65 in-lb Max Torque A 0.10 FORMERLY: M20 onduit Adapter M 20 to 1/2 NPT 65 in-lb Max Torque; used with DIN connector (210319) Order and Price separately. A 0.10 FORMERLY: Assembly Fee See Gas Train Section Page PRIE ON REQUEST M With enclosure, for remote mounting; NEMA Type 12 O ontrol module for use with valve proving systems; Provides control logic for checking valves on gas burning equipment start-up and shut-down. FORMERLY: PRIE ON REQUEST M Without enclosure, for panel mounting O ontrol module for use with valve proving systems; Provides control logic for checking valves on gas burning equipment start-up and shut-down. FORMERLY: PRIE ON REQUEST Products:

163 Accessories Modular Valve 1/2 Flange adapter for Port /2 NPT Accesses port 2 of the DMV for pilot use; G1/8 tap on port 1 A 0.70 FORMERLY: Adapter for A For mounting the high pressure switch on the side of the DMV Allows the A2 pressure switch to monitor pressure downstream of valve 2. A 0.50 FORMERLY: /4 NPT Adapter /4 NPT Used to mount accessories to various ports on the DMV system; Also includes G1/8 accessory tap A 0.70 FORMERLY: Vent Line Adapter NPT female connection Provides a vent line connection between the two automatic shutoff valves. Field installable accessory for DMV 525; 704 & ISO Flanged DMV s B 2.00 FORMERLY: Vent Line Kit , Vent Line Kit 24VD For the DMV704/ , includes LGV 507, K01 & 3/4 Pipe Wiring not included. NP FORMERLY: Test Nipple G 1/8 May be used on any G1/8 pressure tap A 0.50 FORMERLY: Test Nipple G 1/4 May be used on any G1/4 pressure tap B 0.50 FORMERLY: A 0.23 Test Nipple /4 NPT O May be used on any 1/4 NPT pressure tap replaced by A FORMERLY: PRIE ON REQUEST Products:

164 Accessories Modular Valve able Gland PG 11 Black UL/E IP66 Used With Replaces FORMERLY: Lock-up Nut For able Gland PG-11 UL/E IP66 Used With FORMERLY: SO cord strain relief PG PG 11 O SO cord strain relief; May be used on any PG 11 electrical connection Replaced by and FORMERLY: PRIE ON REQUEST Knock out plug PG May be used on any PG 13.5 electrical connection FORMERLY: O PRIE ON REQUEST VPS ADAPTER PLATE /4" compression fitting Allows the VPS ( ) to be used with MVD series automatic shutoff valves 1.00 FORMERLY: VPS mounting screws B 4 per package 0.10 FORMERLY: VPS O-RING sold individually replaced by FORMERLY: O-Ring for GAO.GML/GMH/VPS Sold Individually FORMERLY: O PRIE ON REQUEST A Products:

165 Accessories Modular Valve Screw; M5 x B Fits SV (DLE) 1005 & 1007 body; Sold individually 0.10 FORMERLY: Screw; M6 x B Fits SV (DLE) 1010 & 1012 body; Sold individually 0.10 FORMERLY: Screw; M8 x B Fits SV (DLE) 1015 & 1020 body; Sold individually 0.10 FORMERLY: O-Ring; x B Fits SV (DLE) 1005 & 1007 body. ontact ustomer Service 0.10 FORMERLY: O-Ring; x B Fits DMV 701 SV (DLE) 1010 & 1012 body; 2 per pack 0.10 FORMERLY: O-Ring; x B Fits DMV 702/703 SV (DLE) 1015 & 1020 body; 2 per pack 0.10 FORMERLY: Products:

166 Accessories Flanges Description Flanges for the DUNGS dual modular valve system and FRI regulators 1/8 BSP tap on every flange Version Harmonized ode: Must be ordered and priced individually 1/2 NPT Flange /2 NPT for DMV 701/507 Body & FRI 705/707 Body FORMERLY: A /4 NPT Flange /4 NPT for DMV 701/507 Body & FRI 705/707 Body FORMERLY: A NPT Flange NPT for DMV 701/507 Body & FRI 705/707 Body FORMERLY: A Products:

167 Accessories Flanges 1 1/4 NPT Flange /4 NPT for DMV 701/507 Body & FRI 705/707 Body /2 NPT Flange /2 NPT for DMV 701/507 Body & FRI 705/707 Body FORMERLY: A NPT Flange NPT for DMV 702/703/512/520 Body & FRI 710/712 Body FORMERLY: A /4 NPT Flange /4 NPT for DMV 702/703/512/520 Body & FRI 710/712 Body FORMERLY: A /2 NPT Flange /2 NPT for DMV 702/703/512/520 Body & FRI 710/712 Body FORMERLY: A NPT Flange NPT for DMV 702/703/512/520 Body & FRI 710/712 Body FORMERLY: A " NPT Flange NPT for DMV /6x4 Body FORMERLY: A Rp 3/8 Flange /8 BFPF for DMV 503/11 FORMERLY: Products:

168 Accessories Flanges Rp 1/2 Flange Rp 1/2 for DMV 701/507 Body & FRI 705/707 Body FORMERLY: A Rp 3/4 Flange Rp 3/4 for DMV 701/507 Body & FRI 705/707 Body FORMERLY: A Rp 1 Flange Rp 1 for DMV 701/507 Body & FRI 705/707 Body FORMERLY: A Rp 1 Flange Rp 1 for DMV 702/703/512/520 Body & FRI 710/712 Body FORMERLY: A Rp 1 1/4 Flange Rp 1 1/4 for DMV 702/703/512/520 Body & FRI 710/712 Body FORMERLY: A Rp 1 1/2 Flange Rp 1 1/2 for DMV 702/703/512/520 Body & FRI 710/712 Body FORMERLY: A Rp 2 Flange Rp 2 for DMV 702/703/512/520 Body & FRI 710/712 Body FORMERLY: A Rp 2" Flange Rp 2 for DMV /6x4 Body FORMERLY: B Products:

169 Accessories Flanges 1/2 NPT Flange Kit /2 NPT for SV small body; Includes flange, O-ring & mounting screws A 1.00 FORMERLY: /4 NPT Flange Kit /4 NPT for SV small body; Includes flange, O-ring & mounting screws A 1.00 FORMERLY: /2 NPT Flange Kit /2 NPT for SV medium body; Includes flange, O-ring & mounting screws A 1.50 FORMERLY: /4 NPT Flange Kit /4 NPT for SV medium body; Includes flange, O-ring & mounting screws 1.50 FORMERLY: NPT Flange Kit NPT for SV medium body; Includes flange, O-ring & mounting screws A 1.50 FORMERLY: /4 NPT Flange Kit /4 NPT for SV medium body; Includes flange, O-ring & mounting screws A 1.50 FORMERLY: /2 NPT Flange Kit /2 NPT for SV medium body; Includes flange, O-ring & mounting screws A 1.50 FORMERLY: NPT Flange Kit NPT for SV large body; Includes flange, O-ring & mounting screws 2.00 FORMERLY: Products:

170 Accessories Flanges 1 1/4 NPT Flange Kit /4 NPT for SV large body; Includes flange, O-ring & mounting screws A 2.00 FORMERLY: /2 NPT Flange Kit /2 NPT for SV large body; Includes flange, O-ring & mounting screws A 2.00 FORMERLY: NPT Flange Kit NPT for SV large body; Includes flange, O-ring & mounting screws A 2.00 FORMERLY: Rp 1/2 Flange Kit Rp 1/2 for SV small body; Includes flange, O-ring & mounting screws 1.00 FORMERLY: Rp 3/4 Flange Kit Rp 3/4 for SV small body; Includes flange, O-ring & mounting screws 1.00 FORMERLY: Rp 1/2 Flange Kit Rp 1/2 for SV medium body; Includes flange, O-ring & mounting screws 1.50 FORMERLY: Rp 3/4 Flange Kit Rp 3/4 for SV medium body; Includes flange, O-ring & mounting screws 1.50 FORMERLY: Rp 1 Flange Kit Rp 1 for SV medium body; Includes flange, O-ring & mounting screws 1.50 FORMERLY: Products:

171 Accessories Flanges Rp 1 1/4 Flange Kit Rp 1 1/4 for SV medium body; Includes flange, O-ring & mounting screws 1.50 FORMERLY: Rp 1 1/2 Flange Kit Rp 1 1/2 for SV medium body; Includes flange, O-ring & mounting screws 1.50 FORMERLY: Rp 1 Flange Kit Rp 1 for SV large body; Includes flange, O-ring & mounting screws 2.00 FORMERLY: Rp 1 1/4 Flange Kit Rp 1 1/4 for SV large body; Includes flange, O-ring & mounting screws 2.00 FORMERLY: Rp 1 1/2 Flange Kit Rp 1 1/2 for SV large body; Includes flange, O-ring & mounting screws 2.00 FORMERLY: Rp 2 Flange Kit Rp 2 for SV large body; Includes flange, O-ring & mounting screws 2.00 FORMERLY: DN. 40 Weld Neck Flange DN. 40 (1 1/2 pipe size) Requires four [4] M16x55 stud kits ( ) & one [1] DN. 40 seal (50157) per connection FORMERLY: DN. 50 Weld Neck Flange DN. 50 (2 pipe size) Requires four [4] M16x55 stud kits ( ) & one [1] DN. 50 seal (50158) per connection FORMERLY: Products:

172 Accessories Flanges DN. 65 Weld Neck Flange DN. 65 (2 1/2 pipe size) Requires four [4] M16x65 stud kits ( ) & one [1] DN. 65 seal (50159) per connection FORMERLY: DN. 80 Weld Neck Flange DN. 80 (3 pipe size) Requires eight [8] M16x65 stud kits ( ) & one [1] DN. 80 seal (50160) per connection FORMERLY: DN. 100 Weld Neck Flange DN. 100 (4 pipe size) Requires eight [8] M16x65 stud kits ( ) & one [1] DN. 100 seal (50161) per connection FORMERLY: DN. 125 Weld Neck Flange DN. 125 (5 pipe size) Requires eight [8] M16x75 stud kits ( ) & one [1] DN. 125 seal (50162) per connection FORMERLY: DN. 150 Weld Neck Flange DN. 150 (6 pipe size) Requires eight [8] M20x80 stud kits ( ) & one [1] DN. 150 seal (50163) per connection FORMERLY: DN. 200 Weld Neck Flange DN. 200 (8 pipe size) Requires tweleve [12] M20x90 stud kits ( ) & one [1] DN. 200 seal 50164) per connection FORMERLY: DN. 65 Weld Neck to NPT DN. 65 (2 1/2 pipe size) to 2 1/2 NPT threaded connection Weld Neck to NPT / weld Requires four [4] M16x65 stud kits ( ) & one [1] DN. 65 seal (50159) per connection FORMERLY: DN. 80 Weld Neck to NPT DN. 80 (3 pipe size) to 3 NPT threaded connection Weld Neck to NPT / weld Requires eight [8] M16x65 stud kits ( ) & one [1] DN. 80 seal (50160) per connection FORMERLY: Products:

173 Accessories Flanges DN. 40 Seal DN. 40 (1 1/2 pipe size) 1 piece FORMERLY: DN. 40 Seal DN. 40 (1 1/2 pipe size) 1 piece Replaced by FORMERLY: DN. 50 Seal DN. 50 (2 pipe size) 1 piece FORMERLY: DN. 50 Seal DN. 50 (2 pipe size) 1 piece Replaced by FORMERLY: DN. 65 Seal DN. 65 (2 1/2 pipe size) 1 piece FORMERLY: DN. 65 Seal DN. 65 (2 1/2 pipe size) 1 piece Replaced by FORMERLY: DN. 80 Seal DN. 80 (3 pipe size) 1 piece FORMERLY: O PRIE ON REQUEST O PRIE ON REQUEST O PRIE ON REQUEST DN. 80 Seal DN. 80 (3 pipe size) O 1 piece Replaced by PRIE ON REQUEST FORMERLY: Products:

174 Accessories Flanges DN. 100 Seal DN. 100 (4 pipe size) 1 piece FORMERLY: DN. 100 Seal DN. 100 (4 pipe size) 1 piece Replaced by FORMERLY: DN. 125 Seal DN. 125 (5 pipe size) 1 piece FORMERLY: DN. 125 Seal DN. 125 (5 pipe size) 1 piece Replaced by FORMERLY: DN. 150 Seal DN. 150 (6 pipe size) 1 piece FORMERLY: DN. 150 Seal DN. 150 (6 pipe size) 1 piece Replaced by FORMERLY: DN. 200 Seal DN. 200 (8 pipe size) 1 piece FORMERLY: O PRIE ON REQUEST O PRIE ON REQUEST O PRIE ON REQUEST DN. 200 Seal DN. 200 (8 pipe size) O Set of 2 Replaced by PRIE ON REQUEST FORMERLY: Products:

175 Accessories Flanges Seal DN. 50 Full Face Seal, Full Face DN. 50 PN16 2mm Thick BAU FORMERLY: Seal DN. 65 Full Face Seal, Full Face DN. 65 PN16 2mm Thick BAU FORMERLY: Seal DN. 80 Full Face Seal, Full Face DN. 80 PN16 2mm Thick BAU FORMERLY: Seal DN. 100 Full Face Seal, Full Face DN. 100 PN16 2mm Thick BAU FORMERLY: Seal DN. 125 Full Face Seal, Full Face DN. 125 PN16 2mm Thick BAU FORMERLY: M16x65 Stud Kit Fits DN DN. 100 Includes one threaded stud, two [2] washers & two [2] nuts. FORMERLY: M16x75 Stud Kit Fits DN. 125 Includes one threaded stud, two [2] washers & two [2] nuts. FORMERLY: M20x80 Stud Kit Fits DN. 150 Includes one threaded stud, two [2] washers & two [2] nuts. FORMERLY: Products:

176 Accessories Flanges M20x90 Stud Kit Fits DN. 200 Includes one threaded stud, two [2] washers & two [2] nuts. FORMERLY: Products:

177 Accessories Regulator / Gas & Air Filter Description Accessories and replacement parts for DUNGS gas pressure regulators and gas filters. Version Harmonized ode: Various FRG LOWFIRE BYPASS A Adjustable low fire bypass that field mounts to either side of the 3/8" to 2" FRG/FRNG 0.60 FORMERLY: FRG/FRNG AIR Impulse Line /4 G to 1/4 NPT Air impulse line adapter for FRG/FRI 705, 707, FORMERLY: FRG/FRNG AIR Impulse Line /2 G to 1/2 NPT Air impulse line adapter for FRG/FRI 712, 715, 720, 725, FORMERLY: Products:

178 Accessories Regulator / Gas & Air Filter Spring #1, brown Formerly p/n D to 3.6 W to 9 mbar FRI 705/707; FRS 705/503/505 FORMERLY: Spring #2, white Formerly p/n D to 5 W.. 5 to 13 mbar FRI 705/707; FRS 705/503/505 FORMERLY: Spring #3, orange Formerly p/n D to 8 W.. 5 to 20 mbar FRI 705/707; FRS 705/503/505 FORMERLY: Spring #4, blue (Standard) Formerly p/n D to 12 W.. 10 to 30 mbar FRI 705/707; FRS 705/503/505 FORMERLY: Spring #5, red Formerly p/n D to 22 W.. 25 to 55 mbar FRI 705/707; FRS 705/503/505 FORMERLY: Spring #6, yellow Formerly p/n D to 28 W.. 30 to 70 mbar FRI 705/707; FRS 705/503/505 FORMERLY: Spring #7, black Formerly p/n D to 40 W.. 60 to 110 mbar FRI 705/707; FRS 705/503/505 FORMERLY: Spring #8, pink Formerly p/n D to 60 W to 150 mbar FRI 705/707; FRS 705/503/505 FORMERLY: A A A A A A A A Products:

179 Accessories Regulator / Gas & Air Filter Spring #9, gray Formerly p/n D to 80 W to 200 mbar FRI 705/707; FRS 705/503/505 FORMERLY: Spring #1, brown Formerly p/n D069 1 to 3.6 W to 9 mbar FRS 707/507 FORMERLY: Spring #2, white Formerly p/n D to 5 W.. 5 to 13 mbar FRS 707/507 FORMERLY: Spring #3, orange Formerly p/n D to 8 W.. 5 to 20 mbar FRS 707/507 FORMERLY: Spring #4, blue (Standard) Formerly p/n D to 12 W.. 10 to 30 mbar FRS 707/507 FORMERLY: Spring #5, red Formerly p/n D to 22 W.. 25 to 55 mbar FRS 707/507 FORMERLY: Spring #6, yellow Formerly p/n D to 28 W.. 30 to 70 mbar FRS 707/507 FORMERLY: Spring #7, black Formerly p/n D to 40 W.. 60 to 110 mbar FRS 707/507 FORMERLY: B B B A A B Products:

180 Accessories Regulator / Gas & Air Filter Spring #8, pink Formerly p/n D to 60 W to 150 mbar FRS 707/507 FORMERLY: Spring #9, gray Formerly p/n D to 80 W to 200 mbar FRS 707/507 FORMERLY: Spring #1, brown Formerly p/n D to 3.6 W to 9 mbar FRI 710/712; FRS 710/510 FORMERLY: Spring #2, white Formerly p/n D to 5 W.. 5 to 13 mbar FRI 710/712; FRS 710/510 FORMERLY: Spring #3, orange Formerly p/n D to 8 W.. 5 to 20 mbar FRI 710/712; FRS 710/510 FORMERLY: Spring #4, blue (Standard) Formerly p/n D to 12 W.. 10 to 30 mbar FRI 710/712; FRS 710/510 FORMERLY: Spring #5, red Formerly D to 22 W.. 25 to 55 mbar FRI 710/712; FRS 710/510 FORMERLY: Spring #6, yellow Formerly p/n D to 28 W. 30 to 70 mbar FRI 710/712; FRS 710/510 FORMERLY: B A A A A A A A Products:

181 Accessories Regulator / Gas & Air Filter Spring #7, black Formerly p/n D to 40 W.. 60 to 110 mbar FRI 710/712; FRS 710/510 FORMERLY: Spring #8, pink Formerly p/n D to 60 W to 150 mbar FRI 710/712; FRS 710/510 FORMERLY: Spring #9, gray Formerly p/n D to 80 W to 200 mbar FRI 710/712; FRS 710/510 FORMERLY: Spring #1, brown Formerly p/n D to 3.6 W to 9 mbar FRS 712/715/515/5040 FORMERLY: Spring #2, white Formerly p/n D to 5 W.. 5 to 13 mbar FRS 712/715/515/5040 FORMERLY: Spring #3, orange Formerly p/n D to 8 W.. 5 to 20 mbar FRS 712/715/515/5040 FORMERLY: Spring #4, blue (Standard) Formerly p/n D to 12 W.. 10 to 30 mbar FRS 712/715/515/5040 FORMERLY: Spring #5, red Formerly p/n D to 22 W.. 25 to 55 mbar FRS 712/715/515/5040 FORMERLY: A A A B A Products:

182 Accessories Regulator / Gas & Air Filter Spring #6, yellow Formerly p/n D to 28 W.. 30 to 70 mbar FRS 712/715/515/5040 FORMERLY: Spring #7, black Formerly p/n D to 40 W.. 60 to 110 mbar FRS 712/715/515/5040 FORMERLY: Spring #8, pink Formerly p/n D to 60 W to 150 mbar FRS 712/715/515/5040 FORMERLY: Spring #9, gray Formerly p/n D to 80 W to 200 mbar FRS 712/715/515/5040 FORMERLY: Spring #1, brown Formerly p/n D to 3.6 W to 9 mbar FRS 720/520/5050 FORMERLY: Spring #2, white Formerly p/n D to 5 W.. 5 to 13 mbar FRS 720/520/5050 FORMERLY: Spring #3, orange Formerly p/n D to 8 W.. 5 to 20 mbar FRS 720/520/5050 FORMERLY: Spring #4, blue (Standard) Formerly p/n D to 12 W.. 10 to 30 mbar FRS 720/520/5050 FORMERLY: A B B B B B B Products:

183 Accessories Regulator / Gas & Air Filter Spring #5, red Formerly p/n D to 22 W.. 25 to 55 mbar FRS 720/520/5050 FORMERLY: Spring #6, yellow Formerly p/n D to 28 W.. 30 to 70 mbar FRS 720/520/5050 FORMERLY: Spring #7, black Formerly p/n D to 40 W.. 60 to 110 mbar FRS 720/520/5050 FORMERLY: Spring #8, pink Formerly p/n D to 60 W to 150 mbar FRS 720/520/5050 FORMERLY: Spring #9, gray Formerly p/n D to 80 W to 200 mbar FRS 720/520/5050 FORMERLY: Spring #1, brown Formerly p/n D to 3.6 W to 9 mbar FRS 725/730/525/5065/5080 FORMERLY: Spring #2, white Formerly p/n D to 5 W.. 5 to 13 mbar FRS 725/730/525/5065/5080 FORMERLY: Spring #3, orange Formerly p/n D to 8 W.. 5 to 20 mbar FRS 725/730/525/5065/5080 FORMERLY: A A A A B A A Products:

184 Accessories Regulator / Gas & Air Filter Spring #4, blue (Standard) Formerly p/n D to 12 W.. 10 to 30 mbar FRS 725/730/525/5065/5080 FORMERLY: Spring #5, red Formerly p/n D to 22 W.. 25 to 55 mbar FRS 725/730/525/5065/5080 FORMERLY: Spring #6, yellow Formerly p/n D to 28 W.. 30 to 70 mbar FRS 725/730/525/5065/5080 FORMERLY: Spring #7, black Formerly p/n D to 40 W.. 60 to 110 mbar FRS 725/730/525/5065/5080 FORMERLY: Spring #8, pink Formerly p/n D to 60 W to 150 mbar FRS 725/730/525/5065/5080 FORMERLY: Spring #9, gray Formerly p/n D to 80 W to 200 mbar FRS 725/730/525/5065/5080 FORMERLY: Spring #1, brown Formerly p/n D to 3.6 W to 9 mbar FRS 5100 FORMERLY: Spring #2, white Formerly p/n D to 5 W.. 5 to 13 mbar FRS 5100 FORMERLY: A A A A B B Products:

185 Accessories Regulator / Gas & Air Filter Spring #3, orange Formerly p/n D to 8 W.. 5 to 20 mbar FRS 5100 FORMERLY: Spring #4, blue (Standard) Formerly p/n D to 12 W.. 10 to 30 mbar FRS 5100 FORMERLY: Spring #5, red Formerly p/n D to 22 W.. 25 to 55 mbar FRS 5100 FORMERLY: Spring #6, yellow Formerly p/n D to 28 W.. 30 to 70 mbar FRS 5100 FORMERLY: Spring #7, black Formerly p/n D to 40 W.. 60 to 110 mbar FRS 5100 FORMERLY: Spring #8, pink Formerly p/n D to 60 W to 150 mbar FRS 5100 FORMERLY: Spring #9, gray Formerly p/n D to 80 W to 200 mbar FRS 5100 FORMERLY: Spring #1, brown Formerly p/n D to 3.6 W to 9 mbar FRS 5125 FORMERLY: B Products:

186 Accessories Regulator / Gas & Air Filter Spring #2, white Formerly p/n D to 5 W.. 5 to 13 mbar FRS 5125 FORMERLY: Spring #3, orange Formerly p/n D to 8 W.. 5 to 20 mbar FRS 5125 FORMERLY: Spring #4, blue (Standard) Formerly p/n D to 12 W.. 10 to 30 mbar FRS 5125 FORMERLY: Spring #5, red Formerly p/n D to 22 W.. 25 to 55 mbar FRS 5125 FORMERLY: Spring #6, yellow Formerly p/n D to 28 W.. 30 to 70 mbar FRS 5125 FORMERLY: Spring #7, black Formerly p/n D to 40 W.. 60 to 110 mbar FRS 5125 FORMERLY: Spring #8, pink Formerly p/n D to 60 W to 150 mbar FRS 5125 FORMERLY: Spring #9, gray 56 to 80 W to 200 mbar FRS 5125 FORMERLY: B Products:

187 Accessories Regulator / Gas & Air Filter Spring #1, brown Formerly p/n D to 3.6 W to 9 mbar FRS 5150 FORMERLY: Spring #2, white Formerly p/n D to 5 W.. 5 to 13 mbar FRS 5150 FORMERLY: Spring #3, orange Formerly p/n D to 8 W.. 5 to 20 mbar FRS 5150 FORMERLY: Spring #4, blue (Standard) Formerly p/n D to 12 W.. 10 to 30 mbar FRS 5150 FORMERLY: Spring #5, red Formerly p/n D to 22 W.. 25 to 55 mbar FRS 5150 FORMERLY: Spring #6, yellow Formerly p/n D to 28 W.. 30 to 70 mbar FRS 5150 FORMERLY: Spring #7, black Formerly p/n D to 40 W.. 60 to 110 mbar FRS 5150 FORMERLY: Spring #8, pink Formerly p/n D to 60 W to 150 mbar FRS 5150 FORMERLY: Products:

188 Accessories Regulator / Gas & Air Filter Spring #9, gray 56 to 80 W to 200 mbar FRS 5150 FORMERLY: , FRS 5040 Repair kit B Fits FRS 5040/215/515/715 body; Includes all internal hardware to rebuild the control. FORMERLY: FRS 5050 Repair kit B Fits FRS 5050/220/520/720 body; Includes all internal hardware to rebuild the control. FORMERLY: FRS 5065 Repair kit A Fits FRS 5065/225/525/725 body; Includes all internal hardware to rebuild the control FORMERLY: FRS 5080 Repair kit A Fits FRS 5080/230/730 body; Includes all internal hardware to rebuild the control. FORMERLY: FRS 5100 Repair kit , B Fits FRS 5100 body; Includes all internal hardware to rebuild the control. FORMERLY: FRS 5125 Repair kit , A Fits FRS 5125 body; Includes all internal hardware to rebuild the control FORMERLY: FRS 5150 Repair kit , B Fits FRS 5150 body; Includes all internal hardware to rebuild the control FORMERLY: Products:

189 Accessories Regulator / Gas & Air Filter FRG/FRNG 5050 Repair kit Fits FRG 520/720 and FRNG 5050 body; Includes all internal hardware to rebuild the control. FORMERLY: FRG/FRNG 5065 Repair kit B Fits FRG/FRNG 725/5065 body; Includes all internal hardware to rebuild the control. FORMERLY: FRG/FRNG 5080 Repair kit B Fits FRG/FRNG 730/5080 body; Includes all internal hardware to rebuild the control. FORMERLY: FRNG 5100 Repair kit , Fits FRNG 5100 body; Includes all internal hardware to rebuild the control. FORMERLY: FRNG 5125 Repair kit , Fits FRNG 5125 body; Includes all internal hardware to rebuild the control. FORMERLY: FRNG 5150 Repair kit , Fits FRNG 5150 body; Includes all internal hardware to rebuild the control. FORMERLY: B FRI 705/707 Replacement filter 50 micron O Fits FRI 705/707 body Replaced by FORMERLY: PRIE ON REQUEST FRI 710/712 Replacement filter 50 micron O Fits FRI 710/712 body Replaced by FORMERLY: PRIE ON REQUEST Products:

190 Accessories Regulator / Gas & Air Filter FRI Replacement Filter/Strainer 23 mesh strainer 50 micron filter Fits FRI 705 and 707 body Fits DMV 701 FORMERLY: FRI Replacement Filter/Strainer 23 mesh strainer 50 micron filter Fits FRI 710 and 712 body Fits DMV FORMERLY: GF 505/507 Replacement filter 50 micron Fits GF 505/5507 body FORMERLY: GF 510/515 Replacement filter 50 Micron Fits GF 510/515 filter body FORMERLY: GF 520 Replacement filter 50 Micron Fits GF 520 filter body FORMERLY: GF 40040/3 Replacement Filter 50 Micron Fits GF 40040/3 filter body FORMERLY: B B B B B GF 40050/3 Replacement Filter Micron Fits GF 40050/3 filter body ONLY, Not For GF 40050/4 B 0.20 FORMERLY: GF 40065/3 & /4 Replacement Micron Fits GF 40065/3 filter body A 0.20 FORMERLY: Products:

191 Accessories Regulator / Gas & Air Filter GF 40080/3 & /4 Replacement 50 Micron Fits GF 40080/3 filter body FORMERLY: GF 40100/3 & /4 Replacement 50 Micron Fits GF 40100/3 filter body FORMERLY: GF 40125/3 Replacement Filter 50 Micron Fits GF filter body FORMERLY: GF Replacement Filter Insert 50 Micron Fits GF filter body FORMERLY: GF 40200/3 Filter Insert DN 200 FORMERLY: A B B , B VF-Filter Media Replacement 50 micron Fits VF pre-mount filter (232440) 0.10 PRIE ON REQUEST FORMERLY: VF-Filter Media Replacement 50 micron Fits VF pre-mount filter (226342) FORMERLY: PRIE ON REQUEST VZF Replacement Filter Insert Fits VZF DN. 25 filter (227153), 99.5% filtration of 2 micron particles FORMERLY: Products:

192 Accessories Regulator / Gas & Air Filter VZF Replacement Filter Insert Fits VZF DN. 40 filter (227154) and DN. 50 filter (227155), 99.5% filtration of 2 micron particles FORMERLY: VZF Replacement Filter Insert Standard replacement filter Fits VZF DN. 65 filter (251528) or DN. 80 filter ( ), 99.5% filtration of 2 micron particles 2.00 FORMERLY: VZF Replacement Filter Insert Standard replacement filter Fits VZF DN. 100 filter (TBD), 99.5% filtration of 2 micron particles 2.20 FORMERLY: VZF Replacement Filter Insert , Standard replacement filter Fits VZF DN. 150 filter (227158), 99.5% filtration of 2 micron particles B 4.05 FORMERLY: VZF Replacement O-Ring Set Fits VZF DN. 25 filter ( ) FORMERLY: A VZF Replacement O-Ring Set Fits VZF DN. 40 filter (227154) or DN. 50 filter (227155) FORMERLY: A VZF Replacement O-Ring Set Standard replacement O-ring Fits VZF DN. 65 (251528) or DN. 80 filter (227156) A 0.10 FORMERLY: A 0.05 VZF Replacement O-Ring Set Standard replacement O-ring Fits VZF DN. 100 filter (TBD) 0.10 FORMERLY: A 0.05 Products:

193 Accessories Regulator / Gas & Air Filter VZF Replacement O-Ring Set Standard replacement O-ring Fits VZF DN. 150 filter (227158) FORMERLY: A Products:

194 Accessories Pressure Switch Description Accessories and replacement parts for DUNGS gas and air switches. Version Harmonized ode: Various A2 Pressure switch mounting kit For A2 Gas Pressure Switches (GAO/GMH/GML) ontains 2 screws and 1 O-ring FORMERLY: A A2 Pressure switch mounting kit For A2 Gas Pressure Switches (GW/NB/UB) ontains 2 screws and 1 O-ring NP FORMERLY: DIN onnector For A2/A4/A5/A Pins, gray A 0.20 FORMERLY: Products:

195 Accessories Pressure Switch over for AA-A1-X Splash protection FORMERLY: over for AA-2 Formerly D NEMA Type 4 FORMERLY: PI 400 over NEMA Type 4 FORMERLY: A B over for pressure switch over for manual reset pressure switch GMH/GML A2/A4 NEMA Type 4 If screws are needed order part Replaced by A FORMERLY: O PRIE ON REQUEST over for pressure switch over for manual reset pressure switch GMH/GML A2/A4 NEMA Type 4 B 0.10 FORMERLY: A 0.05 Screw, Switch over A Single Screw FORMERLY: over for pressure switch over for automatic reset pressure switch GAO A2/A4 NEMA Type 4 If screws are needed order part Replaced by A FORMERLY: B PRIE ON REQUEST over for pressure switch over for automatic reset pressure switch GAO A2/A4 NEMA Type 4 B 0.10 FORMERLY: A 0.05 Products:

196 Accessories Pressure Switch Neon Light 120 Vac Red and Green Light Replacement light for PI 400 FORMERLY: B Neon Light 24 Vac Red and Green Light Replacement light for PI 400 FORMERLY: B Neon Light 120 Vac Red Shaft, Orange Light; GAO, GMH, GML FORMERLY: B Light PI V Green Light FORMERLY: Neon Light 220 Vac Black Shaft, Orange Light; GW, UB, NB O Replaced by PRIE ON REQUEST FORMERLY: Neon Light 220 Vac Green Shaft, Orange Light; GW, UB, NB Replaced by FORMERLY: O PRIE ON REQUEST Neon Light 220 Vac Green Shaft, Orange Light; GW, UB, NB FORMERLY: A Neon Light Vdc / 24 Vac lear Shaft, Orange Light; GAO, GML, GMH FORMERLY: B Products:

197 Accessories Pressure Switch Neon Light 24 VA/D lear Shaft, Orange Light, Mounting set, AA and LGW Air Switch B 0.10 FORMERLY: Neon Light 120 Vac Red Shaft, Orange Light, Mounting set, AA and LGW Air Switch B 0.10 FORMERLY: G 1/8 Straight Adapter G 1/8 Thread to barb adapter 0.10 FORMERLY: G 1/8 Thread to barb adapter G 1/8 Thread to barb adapter 90 deg 0.10 FORMERLY: G 1/4 Thread to barb adapter G 1/4 Thread to barb adapter 90 deg 0.10 FORMERLY: Side-by-Side Mount Kit B Allows high/low switches to be mounted side by side while using one pressure source 0.60 FORMERLY: Air Duct Mount Kit O Includes rubber hose and accessories to mount pressure sensing ports to ducting. (Klima Set) Replaced by FORMERLY: PRIE ON REQUEST Air Duct Mount Kit B Includes rubber hose and accessories to mount pressure sensing ports to ducting. (Klima Set) 0.60 PRIE ON REQUEST FORMERLY: Products:

198 Accessories Pressure Switch Metal pressure switch bracket Fits AA-A2; AA FORMERLY: Plastic pressure switch bracket Fits AA-A2; AA FORMERLY: B B LGW test button LGW test button Used to simulate pressure loss in the field (Air only) FORMERLY: B PRIE ON REQUEST Strain Relief for AA-A /2 NPT Includes clear NEMA Type 12 cover FORMERLY: B Strain Relief for pressure switches PG 11 O Used for strain relief with SO cord. Obsolete, replaced by and FORMERLY: PRIE ON REQUEST Strain Relief for DIN onnector M2O Fits: DMV DIN onnector E Approved Pressure Switches FORMERLY: O PRIE ON REQUEST Plug for GW/GAO B 3 pin plus ground male connector used with (DIN connector for pressure switches); Automatic reset 0.20 FORMERLY: Plug for UB/NB/GMH/GML B 3 pin plus ground male connector used with (DIN connector for pressure switches); Manual reset 0.20 FORMERLY: Products:

199 Accessories Replacement oils Description Replacement oils Version Harmonized ode: Specifications ontact technical support for product specific details Mag. Type Vac; NEMA Type 12 Fits: MVD 505/6; MVDLE 205/6 PRODUTION #: FORMERLY: A Mag. Type Vac; NEMA Type 12 Fits: MVD 507/6; MVD 510/6; MVDLE 207/6; 210/6 PRODUTION #: FORMERLY: A Mag. Type Vac; NEMA Type 12 Fits: MVD 512/6; 515/6; MVDLE 212/6; 215/6; 220/6 PRODUTION #: FORMERLY: A Products:

200 Accessories Replacement oils Mag. Type Vac; NEMA Type 12 Fits: MVD 520/6; MVDLE 225/6 PRODUTION #: FORMERLY: Mag. Type Vac; NEMA Type 12 Fits: MVD 525/6; MVDLE 230/6 PRODUTION #: FORMERLY: Mag. Type Vac; NEMA Type 12 Fits: MVD 530/6 PRODUTION #: FORMERLY: A , Mag. Type Vac; NEMA Type Fits: MVD 505/6; MVDLE 205/ PRIE ON REQUEST FORMERLY: Mag. Type Vac; NEMA Type 4 O Fits: MVD 507/6; MVD 510/6; MVDLE 207/6; 210/ PRIE ON REQUEST FORMERLY: Mag. Type Vac; NEMA Type 4 Fits: MVD 512/6; 515/6; MVDLE 212/6; 215/6; 220/ PRIE ON REQUEST FORMERLY: Mag. Type Vac; NEMA Type Fits: MVD 520/6; MVDLE 225/ PRIE ON REQUEST FORMERLY: Mag. Type Vac; NEMA Type 4 Fits: MVD 525/6; MVDLE 230/ PRIE ON REQUEST FORMERLY: Products:

201 Accessories Replacement oils Mag. Type Vac; NEMA Type 4 Fits: MVD 530/6 FORMERLY: PRIE ON REQUEST Mag. Type Vac; IP 54 Fits: MVD 503/5; MVD 505/5; MVDLE 503/5; LGV 507/5 PRODUTION #: FORMERLY: A Mag. Type Vac; IP 54 Fits: MVD 507/5; MVD 510/5; MVDLE 507/5 PRODUTION #: FORMERLY: A Mag. Type Vac; IP 54 Fits: MVD 515/5; MVDLE 515/5 PRODUTION #: FORMERLY: A Mag. Type Vac; IP 54 Fits: MVD 520/5; MVDLE 520/5 PRODUTION #: FORMERLY: B Mag. Type Vac; IP 54 Fits: MVD 525/5 PRODUTION #: FORMERLY: Mag. Type Vac; NEMA Type 12 Fits: MVD 505/6; MVDLE 205/6 PRODUTION #: FORMERLY: Mag. Type Vac; NEMA Type 12 Fits: MVD 507/6; MVD 510/6; MVDLE 207/6; 210/6 PRODUTION #: FORMERLY: B Products:

202 Accessories Replacement oils Mag. Type Vac; NEMA Type 4x Fits: SV 1005/6x4; SV 1007/6x4; SV-DLE 1005/6x4; SV- DLE 1007/6x4 PRODUTION #: FORMERLY: B Mag. Type Vac; NEMA Type 4x Fits: SV 1010/6x4; SV 1012/6x4; SV-DLE 1010/6x4; SV- DLE 1012/6x4 PRODUTION #: FORMERLY: Mag. Type Vac; NEMA Type 4x Fits: SV 1015/6x4; SV 1020/6x4; SV-DLE 1015/6x4; SV- DLE 1020/6x4 PRODUTION #: FORMERLY: Mag. Type Vac; NEMA Type 12 Fits: DMV 701/6x2; DMV-DLE 701/6x2; DMV-ZRD(LE) 701/6x2 PRODUTION #: FORMERLY: A Mag. Type Vac; NEMA Type 12 Fits: DMV 702; DMV-DLE 702; DMV-ZRD(LE) 702/6x2 PRODUTION #: FORMERLY: A Mag. Type Vac; NEMA Type 12 Fits: DMV 703/6x2; DMV-DLE 703/6x2; DMV-ZRD(LE) 703/6x2 PRODUTION #: FORMERLY: A Mag. Type Vdc; NEMA Type 12 Fits: DMV 701/6x2; DMV-DLE 701/6x2 PRODUTION #: FORMERLY: Mag. Type Vdc; NEMA Type 12 Fits: DMV 702/6x2; DMV-DLE 702/6x2; PRODUTION #: FORMERLY: B Products:

203 Accessories Replacement oils Mag. Type Vdc; NEMA Type 12 Fits: DMV 703/6x2; DMV-DLE 703/6x2 PRODUTION #: FORMERLY: Mag. Type Vac; NEMA Type 12 Fits: DMV 701/6x2; DMV-DLE 701/6x2 PRODUTION #: FORMERLY: Mag. Type Vac; NEMA Type 12 Fits: DMV 702/6x2; DMV-DLE 702/6x2 PRODUTION #: FORMERLY: Mag. Type Vac; NEMA Type 12 Fits: DMV 703/6x2; DMV-DLE 703/6x2 PRODUTION #: FORMERLY: Mag. Type Vac; NEMA Type 4x Fits: DMV 702/6x4; DMV-DLE 702/6x4; Price is for one coil only. To replace both coils order 2 pieces! PRODUTION #: FORMERLY: A Mag. Type Vac; NEMA Type 4x Fits: DMV 703/6x4; DMV-DLE 703/6x4; Price is for one coil only. To replace both coils order 2 pieces! PRODUTION #: FORMERLY: A Mag. Type Vac; NEMA Type 4x Fits: DMV 704/6x4; DMV-DLE 704/6x4; Price is for one coil only. To replace both coils order 2 pieces! PRODUTION #: FORMERLY: Mag. Type Vdc; IP 54 Fits: DMV 507/11; DMV-DLE 507/11 PRODUTION #: FORMERLY: Products:

204 Accessories Replacement oils Mag. Type Vdc; IP 54 Fits: DMV 512/11; DMV-DLE 512/11 PRODUTION #: FORMERLY: Mag. Type , Vdc; IP 54 Fits: DMV 520/11; DMV-DLE 520/11 DMV 5040; DMV-DLE 5040; DMV 5050; DMV-DLE 5050 PRODUTION #: FORMERLY: Mag. Type Vac; IP 54 Fits: DMV 507/11; DMV-DLE 507/11 PRODUTION #: FORMERLY: Mag. Type Vac; IP 54 Fits: DMV 512/11; DMV-DLE 512/11 PRODUTION #: FORMERLY: Mag. Type , Vac; IP 54 Fits: DMV 520/11; DMV-DLE 520/11 DMV 5040; DMV-DLE 5040; DMV 5050; DMV-DLE 5050 PRODUTION #: FORMERLY: Mag. Type Vac; IP 54 Fits: DMV 507/11; DMV-DLE 507/11 PRODUTION #: FORMERLY: Mag. Type Vac; IP 54 Fits: DMV 512/11; DMV-DLE 512/11 PRODUTION #: FORMERLY: B Mag. Type , Vac; IP 54 Fits: DMV520/11; DMV-DLE 520/11 DMV 5040; DMV-DLE 5040; DMV 5050; DMV-DLE 5050 PRODUTION #: FORMERLY: Products:

205 Accessories Replacement oils Mag. Type , /120 Vac; NEMA Type 12; IP 54 Fits: DMV 525; DMV-DLE 525; DMV 5065; DMV-DLE 5065 PRODUTION #: FORMERLY: Mag. Type , Vac; IP 54 Fits: DMV 5080; DMV-DLE 5080 PRODUTION #: FORMERLY: Mag. Type , Vac; IP 54 Fits: DMV 5100; DMV-DLE 5100 PRODUTION #: FORMERLY: Mag. Type , Vac; IP 54 Fits: DMV 5125; DMV-DLE 5125 PRODUTION #: FORMERLY: Mag. Type , Vac NEMA Type 12; IP 54 Fits: DMV 525; DMV-DLE 525; DMV 5065; DMV-DLE 5065 PRODUTION #: FORMERLY: Mag. Type , Vac; IP 54 Fits: DMV 5080; DMV-DLE 5080 PRODUTION #: FORMERLY: Mag. Type , Vac; IP 54 Fits: DMV 5100; DMV-DLE 5100 PRODUTION #: FORMERLY: Mag. Type , Vac; IP 54 Fits: DMV 5125; DMV-DLE 5125 PRODUTION #: FORMERLY: Products:

206 Accessories Replacement oils Mag. Type , Vdc; NEMA Type 12; IP 54 Fits: DMV 525; DMV-DLE 525; DMV 5065; DMV-DLE 5065 PRODUTION #: FORMERLY: B Mag. Type , Vdc; IP 54 Fits: DMV 5080; DMV-DLE 5080 PRODUTION #: FORMERLY: Mag. Type , Vdc; IP 54 Fits: DMV 5100; DMV-DLE 5100 PRODUTION #: FORMERLY: Mag. Type , Vdc; IP 54 Fits: DMV 5125; DMV-DLE 5125 PRODUTION #: FORMERLY: Mag. Type Vac; NEMA Type 12 Fits: DMV ZRD/LE 701/507 Valve 2 oil 2 PRIE ON REQUEST FORMERLY: Mag. Type Vac; NEMA Type 12 Fits: DMV ZRD/LE 702/512 Valve 2 oil 2 PRIE ON REQUEST FORMERLY: Mag. Type Vac; NEMA Type Fits: DMV ZRD/LE 703/520 Valve 2 oil 2 PRIE ON REQUEST FORMERLY: Products:

207 Accessories Replacement Printed ircuit Boards Description Replacement Printed ircuit Boards Version Harmonized ode: Specifications ontact technical support for product specific details PWB SV V Fits mag type 20 FOR SV 1005/6X4 1007/6X4 FORMERLY: PWB SV V Fits mag type FOR SV 1010/6x4 1012/6x4 1015/6x4 1020/6x4 FORMERLY: PWB DMV V/24VA Fits mag type 1111 FOR DMV 701 FORMERLY: Products:

208 Accessories Replacement Printed ircuit Boards PWB DMV Vdc Fits mag type 1111 FOR DMV 701 FORMERLY: PWB DMV V/24VA Fits mag type 1211 & 1212 FOR DMV FORMERLY: PWB DMV Vdc Fits mag type 1211 & 1212 FOR DMV FORMERLY: PWB DMV Vdc Fits mag type 1211, 1212, 1411, 1511, 1611, 1711 FOR DMV 512, 520, 525, 5040, 5050, 5065, 5080, 5100, 5125 FORMERLY: A PWB DMV 525, VA Fits mag type 1212, 1411, 1511 FOR DMV 525, 5040, 5050, 5065, 5080 PRIE ON REQUEST FORMERLY: A PWB DMV VA Fits mag type 1211, 1411, 1511 FOR DMV 512, 520, 525, 5040, 5050, 5065, 5080 PRIE ON REQUEST FORMERLY: A PWB DMV VA Fits mag type 1611, FOR DMV 5100, 5125 PRIE ON REQUEST FORMERLY: A PWB MV... X05/6 Fits mag type 100 PRIE ON REQUEST FORMERLY: A Products:

209 Accessories Replacement Printed ircuit Boards PWB MV... X07/X10/6 Fits mag type PRIE ON REQUEST FORMERLY: A PWB MV... X12/X15/X20/X25/230/ Fits mag type 300/400/500 PRIE ON REQUEST FORMERLY: A PWB MV / Fits mag type 550 PRIE ON REQUEST FORMERLY: A Products:

210 Accessories Other Product Description Accessories for other products Version Harmonized ode: Various Rp 1/4 NPT Push Button B 1/4 NPT Isolation push button valve, Female / Female threads. Includes Seal ( ) 0.75 FORMERLY: A 0.34 Rp 1/2 Push Button B Rp 1/2 Isolation push button valve, Female / Female threads. Includes Seal ( ) 0.75 FORMERLY: A 0.34 MANOMETER Mbar pressure range Rp 1/2 Threaded male connection 0.75 FORMERLY: Products:

211 Accessories Other Product MANOMETER 0-60 Mbar pressure range Rp 1/2 Threaded male connection FORMERLY: MANOMETER Mbar pressure range Rp 1/2 Threaded male connection FORMERLY: MANOMETER Mbar pressure range Rp1/2 Threaded male connection FORMERLY: MANOMETER Mbar pressure range Rp 1/2 Threaded male connection FORMERLY: MANOMETER Mbar pressure range Rp 1/2 Threaded male connection FORMERLY: MANOMETER Mbar pressure range Rp 1/2 Threaded male connection FORMERLY: MANOMETER 0-1.6Bar pressure range Rp 1/2 THREADS LS 1.6 SERIES 1400 FORMERLY: MANOMETER 0-1Bar pressure range 1/2 THREADS LS 1.6 FORMERLY: NP NP NP NP NP NP Products:

212 Accessories Other Product MANOMETER Mbar pressure range 1/2 THREADS NP FORMERLY: MANOMETER Bar pressure range 1/2 THREADS 1557 NP FORMERLY: MANOMETER Bar pressure range 1/2 THREADS NP FORMERLY: MANOMETER Bar pressure range 1/2 THREADS 1557 NP FORMERLY: Gauge Press W NP FORMERLY: Gauge Press W NP FORMERLY: Gauge Press W OBSOLETE O FORMERLY: Gauge Press W OBSOLETE FORMERLY: O Products:

213 Accessories Other Product Gauge Press PSI 1/4 NP FORMERLY: Gauge Press PSI 1/4 NP FORMERLY: Gauge Press PSI 1/4N NP FORMERLY: Gauge Press PSI NP FORMERLY: Gauge Press PSI 1/4NPT NP FORMERLY: Gauge Press PSIG NP FORMERLY: Gauge Press PSIG NP FORMERLY: Gauge Press W FORMERLY: NP Products:

214 Accessories Other Product Gauge Press. -8W + 16 W FORMERLY: ENLOSURE for DMA NEMA Type 4 FORMERLY: NP A LOKING DEVIE for Ball Valves /2 to 3/4 O 0.15 FORMERLY: LOKING DEVIE for Ball Valves to 1 1/4 O 0.18 FORMERLY: PRIE ON REQUEST PRIE ON REQUEST LOKING DEVIE for Ball Valves /2 to 2 O 0.43 FORMERLY: PRIE ON REQUEST Replacement cover for VDK Includes Printed Version SO2 E Wire Board 1.00 FORMERLY: Hydraulic Brake Fits: DMV /702/703 SV 10XX B FORMERLY: Hydraulic Brake Fits: DMV 507; DMV 512; DMV 520; DMV 5040; DMV 5050 Replaced by PRIE ON REQUEST FORMERLY: Products:

215 Accessories Other Product Hydraulic Brake Fits: MV... X05/6 FORMERLY: Hydraulic Brake Fits: MV... X07/X10/X12/X15/X20/6 FORMERLY: Hydraulic Brake Fits: MV... X25/X30/6 FORMERLY: Hydraulic Brake Fits: SV ; MB420-DMZ 520, H12/6, DMV-DLE 507/11, 512/11, 512/11, 520/11, 5040/11, 5050/11 FORMERLY: Adjustment knob Fits: DMV 701/702/703 FORMERLY: Adjustment knob Fits: MV... X05 FORMERLY: Adjustment knob Fits: MV... X07/X10/X12/X15/X20 FORMERLY: Adjustment knob Fits: MV... X25/X30 FORMERLY: NP PRIE ON REQUEST B B Products:

216 Accessories Other Product over PWB box Fits: DMV 7XX/6X4 series and MV... /6 series valves omes with 2 screws PRIE ON REQUEST FORMERLY: A over PWB box Fits: SV 1005/1007/505/507 Includes: over, gasket, screws PRIE ON REQUEST FORMERLY: over PWB box Fits: SV 1010/1012/1015/510/512 Includes: over, gasket, screws PRIE ON REQUEST FORMERLY: over PWB box Fits: SV 1015/1020/515/520 Includes: over, gasket, screws PRIE ON REQUEST FORMERLY: Products:

217 Actuators Product Model Page Spring Return - EMA US Proportionating - EMP-1 US Slave Proportionating - EMP-2 US ma Input Proportionating - EMP-5 US High Torque - EMP-9xxxx US Pneumatic Actuators US Actuator Accessories US Actuator Parts US 117.1

218 300 Spring Return - EMA Description DUNGS actuators are designed to operate dampers, butterfly valves and similar devices. Version Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Electrical ratings Enclosure rating Ambient temperature rating Operating mode Size 120 Vac, 60 Hz NEMA Type 4 (with appropriate conduit connection) -40 F to +136 F (-40 to +58 ) Two Position, Spring return 5 3/8 x 6 9/16 x 5 3/4 (L x W x H) 1/2 Shaft rank arm included; Auxiliary switch not available EMA in lb Output; 180 deg W Spring Return; 20s No Load Timing; 60s Full Load Timing; 120 Vac, 60 Hz, 0.40A; 45 VA running and holding FORMERLY: B EMA in lb Output; 90 deg W Spring Return; 10s No Load Timing; 30s Full Load Timing; 120 Vac, 60 Hz, 0.90A; 45 VA running and holding A FORMERLY: EMA in lb Output; 90 deg W Spring Return; 10s No Load Timing; 30s Full Load Timing; 120 Vac, 60 Hz, 0.40A; 120 VA running, 42 VA holding A FORMERLY: Products:

219 300 Proportionation - EMP-1 Description DUNGS actuators are designed to operate dampers, butterfly valves and similar devices. Version Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Electrical ratings Enclosure rating Auxiliary Switch Ambient temperature rating Operating mode Size 120 Vac, 60 Hz NEMA Type 1 (NEMA Type 4 with AM-363) part # SPDT; 120 Vac -40 F to +136 F (-40 to +58 ) Position Proportioning 100 Ohm Slidewire Feedback 5 3/8 x 5 3/8 x 7 (L x W x H) 1/2 Shaft rank arm included; apable of 180 degree rotation with 180 degree slide wire EMP in lb Output; 90 deg 100 Ohm; 12s fixed;120 Vac, 60 Hz, 0.65A; Aux Sw 120 Vac; NEMA Type 1 A FORMERLY: EMP in lb Output; 90 deg 100 Ohm;12s adjustable; 120 Vac, 60 Hz, 0.65A; Aux Sw 120 Vac; NEMA Type 1 A FORMERLY: EMP in lb Output; 90 deg 100 Ohm; 40s fixed;120 Vac, 60 Hz, 0.65A; Aux Sw 120 Vac; NEMA Type 1 A FORMERLY: Products:

220 300 Proportionation - EMP-1 EMP in lb Output; 90 deg 100 Ohm; 40s adjustable; 120 Vac, 60 Hz, 0.65A; Aux Sw 120 Vac; NEMA Type 1 A FORMERLY: Products:

221 300 Slave Proportionating - EMP-2 Description DUNGS actuators are designed to operate dampers, butterfly valves and similar devices. Version Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Electrical ratings Enclosure rating Auxiliary Switch Ambient temperature rating Operating mode Size 120 Vac, 60 Hz NEMA Type 1 (NEMA Type 4 with AM-363) part # SPDT; 120 Vac -40 F to +136 F (-40 to +58 ) Potentiometer Slaved Proportioning, Ohm, Slidewire Feedback 6 5/8 x 5 3/8 x 7 (L x W x H) 1/2 Shaft rank arm included; apable of 180 degree rotation with 180 degree slide wire EMP in lb Output; 90 deg 12s fixed;120 Vac, 60 Hz, 0.65A; Aux Sw 120 Vac; NEMA Type 1 FORMERLY: B EMP in lb Output; 90 deg 12s adjustable; 120 Vac, 60 Hz, 0.65A; Aux Sw 120 Vac; NEMA Type 1 B FORMERLY: EMP in lb Output; 90 deg 40s fixed;120 Vac, 60 Hz, 0.65A; Aux Sw 120 Vac; NEMA Type FORMERLY: Products:

222 300 Slave Proportionating - EMP-2 EMP in lb Output; 90 deg 40s adjustable; 120 Vac, 60 Hz, 0.65A; Aux Sw 120 Vac; NEMA Type FORMERLY: Products:

223 ma Input Proportioning - EMP-5 Description DUNGS actuators are designed to operate dampers, butterfly valves and similar devices. Version Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Electrical ratings Enclosure rating Auxiliary Switch Ambient temperature rating Operating mode Size 120 Vac, 60 Hz NEMA Type 4 SPDT; 120 Vac -40 F to +136 F (-40 to +58 ) Proportioning, 4-20 ma Input 6 5/8 x 5 3/8 x 7 (L x W x H) 1/2 Shaft rank arm included; apable of 180 degree rotation with 180 degree slide wire EMP in lb Output; 90 deg 4-20 ma; 100 Ohm; 12s fixed; 120 Vac, 60 Hz, 0.65A; Aux Sw 120 Vac, 78VA; NEMA Type 4 A FORMERLY: EMP in lb Output; 90 deg 4-20 ma; 100 Ohm; 12s adjustable; 120 Vac, 60 Hz, 0.65A; Aux Sw 120 Vac; NEMA Type 4 A FORMERLY: EMP ATUATOR 4-20 M in lb Output; 90 deg 4-20 ma; 100 Ohm; 40s fixed; 120 Vac, 60 Hz, 0.65A; Aux Sw 120 Vac; NEMA Type 4 A FORMERLY: Products:

224 ma Input Proportioning - EMP-5 EMP in lb Output; 90 deg 4-20 ma; 100 Ohm; 40s adjustable; 120 Vac, 60 Hz, 1.8A; Aux Sw 120 Vac NEMA Type 4 A FORMERLY: Products:

225 300 High Torque - EMP-9xxx Description DUNGS actuators are designed to operate dampers, butterfly valves and similar devices. Version Harmonized ode: Specifications Electrical ratings Enclosure rating Ambient temperature rating Operating modes Size 120 Vac, 60 Hz NEMA Type 1 (NEMA Type 4 with AM-369, part # ) SPDT; 120 Vac -40 F to +130 F (-40 to +54 ) Potentiometer Slaved Proportioning, Ohm, Slidewire Feed back (requires AE 504, part # ) SPDT or Snap acting controller Proportioning, 4-20 ma Input (Requires P 8391, part # ) 9 1/2 x 10 1/2 x 9 9/16 (L x W x H) 1/2 Shaft rank arm NOT included (Requires part # ); apable of 180 degree rotation with 180 degree slide wire EMP in lb Output; 90 deg 100 Ohm; 20s fixed;120 Vac, 60 Hz, 1.8A; Aux Sw 120 Vac; Requires crank arm (267239); Requires (2) and (1) to mount 4-20 ma control (267218). FORMERLY: , EMP , in lb Output; 90 deg 100 Ohm; 33s fixed; 120 Vac, 60 Hz, 1.8A; Aux Sw 120 Vac; Requires crank arm (267239); Requires (2) and (1) to mount 4-20 ma control (267218) FORMERLY: EMP , in lb Output; 90 deg 100 Ohm; 57s fixed; 120 Vac, 60 Hz, 1.8A; Aux Sw 120 Vac; Requires crank arm (267239); Requires (2) and (1) to mount 4-20 ma control (267218) FORMERLY: Products:

226 300 Pneumatic Actuators Description DUNGS actuators are designed to operate dampers, butterfly valves and similar devices. Version Harmonized ode: Specifications rank arm NOT included; Refer to selection guide for technical specifics. MP in/-lb Output; 90 deg 120 Vac, 60 Hz, 0.65A; 40 s fixed; Aux Sw 120 Vac, 100 Ohm slidewire; FORMERLY: PRIE ON REQUEST MK Pneumatic Actuator 8 sq. effective area; Max air pressure 30 PSI; Air connection 1/8 NPT FORMERLY: MP in/-lb Output; 90 deg 120 Vac, 60 Hz, 0.95A; Aux Sw 120 Vac PRIE ON REQUEST FORMERLY: Products:

227 310 Actuator Accessories Description Actuator Accessories Version Harmonized ode: Installation charge of any accessory is minimum $25 per motor [contact ustomer Service for part number specific quote]. 5 business day lead time for assembly and mounting. P-9302 For EMP 4xx actuators 4-20 ma D current to position converter, adjustable zero and deadband NEMA Type 4; -40 to +140 deg F (-40 to +60 deg ) FORMERLY: P for High Torque TBD For EMP 9xxx actuators - Requires (2) #50007 and (1) to mount to actuator ma D current to position converter, adjustable zero and deadband NEMA Type 4; -40 to +140 deg F (-40 to +60 deg ) Obsolete, Replaced by FORMERLY: A O PRIE ON REQUEST P for High Torque For EMP 9xxx actuators 4-20 ma D current to position converter, adjustable zero and deadband NEMA Type 4; -40 to +140 deg F (-40 to +60 deg ) Includes the coupling kit FORMERLY: Products:

228 310 Actuator Accessories AM For EMP 4xx actuators Auxiliary switch; Two independently adjustable snap action SPDT Switches Vac; NEMA Type 1 A FORMERLY: AM For EMP 4xx actuators Auxiliary switch; Four independently adjustable snap action SPDT Switches Vac; NEMA Type FORMERLY: AM B 100 Ohm, Single potentiometer for position indicating or paralleling FORMERLY: AE Paralleling Relay FORMERLY: Products:

229 395 Actuator Parts Description Actuator Parts Version Harmonized ode: Installation charge of any accessory is $25.00 per motor; 5 business day lead time for assembly and mounting. ADDA Slidewire 100 Ohm, 90 deg FORMERLY: ADDA Slidewire 135 Ohm, 90 deg FORMERLY: ADDA Slidewire 1000 Ohm, 90 deg FORMERLY: B Products:

230 395 Actuator Parts ADDA Slidewire 100 Ohm, 180 deg FORMERLY: B ADDA Slidewire 135 Ohm, 180 deg FORMERLY: B ADDA Ohm, 90 deg Slidewire and Wiper arm kit FORMERLY: A ADDA Internal slidewire wiper for EMP FORMERLY: B AM deg mounting bracket for EMP4xx motors FORMERLY: PND Diaphragm for actuators for MK-314 motors FORMERLY: A ADDA /240 Vac Transformer Kit FORMERLY: AM /16 dia Hole Ball Joint Linkage Swivel onnector. FORMERLY: B Products:

231 395 Actuator Parts AM-122 5/16 dia Hole Straight Linkage onnector. FORMERLY: AM B 5/16 dia. x 20 Damper Rod for 173 -lb Load FORMERLY: AM A onnector Link with 1/2 Ball Joints; Adjustable 15 3/4 to 24 3/4 in length FORMERLY: AM B 1/2 dia rank Arm Standard on EMA 4xx and EMP 4xx motors FORMERLY: AM B 1/2 dia Splined rank Arm fits EMA 4xx and EMP 4xx motors FORMERLY: AM B 3/4 dia rank Arm For EMP 9xxx motors FORMERLY: AM A Weather resistant covers for EMP 4xx actuators. (NEMA Type 4) FORMERLY: AM A Weather Resistant overs for EMP 9xxx actuators. (NEMA Type 4) FORMERLY: Products:

232 395 Actuator Parts 1/2 onduit Extension Two (2) required for EMP 9xxx actuators when mounting 4-20 ma control box (267218) FORMERLY: AM O Fittings P Mounting Obsolete, Replaced by FORMERLY: PRIE ON REQUEST AM Fittings P Mounting Replaces 43207, is included in FORMERLY: PRIE ON REQUEST Products:

233 Ignition Transformers Product Model Page Ignition Transformers US DEZ Ignition Transformers US 121.1

234 450 Ignition Transformers Description Ignition Transformers Version Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Enclosure rating Ambient temperature rating NEMA Type 1 +5 F to +110 F 1092 type S Ignition Transformer 120 Vac, 60 Hz Primary; 6000 V Secondary FORMERLY: A IGN XFMR 1092 SG Ignition Transformer 120 VA 60 Hz 600 V Secondary FORMERLY: B GP Ignition Transformer 120 Vac, 60 Hz Primary; 10,000 V Secondary FORMERLY: B Products:

235 450 Ignition Transformers 1112 type S Ignition Transformer 240 Vac, 60 Hz Primary; 6000 V Secondary FORMERLY: B type S Ignition Transformer 240 Vac, 50 Hz Primary; 6000 V Secondary FORMERLY: B Products:

236 450 DEZ Ignition Transformers Description The DUNGS DEZ are electronic high-performance ignition transformers with high-frequency oscillation technology. ompared with conventional inductive ignition transformers, the DEZ are much smaller and lighter. Designs for one or two ignition electrodes are available in different voltage versions. SEO Model is the single electrode model. SEO versions are to be used when both ignition of the burner & flame monitoring via flame rod (ionization) are done with the same electrode. Version Application For oil and gas burners, ignition takes place, depending on design, with one ignition electrode against the burner mass or with two ignition electrodes between the electrodes. The DEZ ignition transformers are available in two versions: either (DEZ 1xx) with a high-voltage output for ignition against the burner mass or (DEZ 2xx) with two high-voltage outputs for ignition between the electrodes. For use in burner systems in which ignition and ionization flame monitoring takes place via a common electrode, the SEO versions must be used. Transformers for two electrodes are available upon request. Harmonized ode: Various Approvals: 73/23/EE Low-Voltage Directive 89/336/EE EM Directive Ignition cables to be ordered from Dungs when ordering DEZ Transformers. The cables are not standard cables. DEZ 100 Ignition Transformer DEZ Ignition Transformer 230VA DEZ 101 Ignition Transformer DEZ Ignition Transformer 120VA DEZ 100 Ignition Transformer SEO DEZ Ignition Transformer 230VA NP NP NP 450 Products:

237 450 DEZ Ignition Transformers DEZ 101 Ignition Transformer SEO DEZ Ignition Transformer 120VA Ignition able Ignition able 1500mm Ignition able onnection able 1000mm Ignition able onnection able 5000mm Ignition Transformer able Ignition Transformer able 370mm Ignition Transformer able Ignition Transformer able 1000mm NP NP NP NP NP NP 450 Products:

238 Ball Valves Product Model Page DUNGS Ball Valves - KH US Ball Valves - KH EU Flanged Ball Valves - FKH US/EU Lug Butterfl y Valves - BV E 133.1

239 180 DUNGS Ball Valves - KH Description 1/4 NPT to 3 NPT ball valve Application The ball valve is for manual shutoff suitable for natural gas, propane, butane, air and other inert gases. Version Link to the Datasheet Link to the User Manual Harmonized ode: Specifications Max. operating pressure Ambient temperature rating 14.5 PSI (1000 mbar) (125 PSI UL) -40 F to +300 F (-20 to +150 ) Brass body; Full port KH 01/6-02 1/4 NPT Brass Body FORMERLY: D KH 01/6-05 3/8 NPT Brass Body FORMERLY: D KH 01/6-05 1/2 NPT Brass Body FORMERLY: D A A A Products:

240 180 DUNGS Ball Valves - KH KH 01/6-07 3/4 NPT Brass Body FORMERLY: D KH 01/ NPT Brass Body FORMERLY: D KH 01/ /4 NPT Brass Body FORMERLY: D KH 01/ /2 NPT Brass Body FORMERLY: D KH 01/ NPT Brass Body FORMERLY: D KH 01/ /2 NPT Brass Body NOT FM APPROVED FORMERLY: D KH 01/ NPT Brass Body NOT FM APPROVED FORMERLY: D A A A A A B B Products:

241 180 Ball Valves - KH Description Rp 1/4 to Rp 2 ball valve, PN 1 as per DIN 3537 Part 1. Application The ball valve is for manual shutoff suitable for natural gas, propane, butane, air and other inert gases. Version Harmonized ode: Specifications Max. operating pressure Ambient temperature rating 14.5 PSI (1000 mbar) -4 F to +300 F (-20 to +150 ) Brass body; Full port KH 1/4" Rp 1/4 Manually operated; Nickel-plated brass body. Replaced by FORMERLY: B 180 PRIE ON REQUEST Ball Valve 1/4 RP Rp 1/4 Manually operated; 5bar E; Hard hrome Plated. NP 180 FORMERLY: Ball Valve 3/8 RP Rp 3/8 Manually operated; 5bar E; Hard hrome Plated. FORMERLY: NP 180 Products:

242 180 Ball Valves - KH Ball Valve 1/2 RP Rp 1/2 Manually operated; 5bar E; Hard hrome Plated. NP 180 FORMERLY: Ball Valve 3/4 RP Rp 3/4 Manually operated; 5bar E; Hard hrome Plated. NP 180 FORMERLY: KH 1" Rp 1 Manually operated; Nickel-plated brass body. Replaced by FORMERLY: B Ball Valve 1 RP Rp 1 Manually operated; 5bar E; Hard hrome Plated. NP 180 FORMERLY: Ball Valve 1 1/2 RP Rp 1 1/2 Manually operated; 5bar E; Hard hrome Plated. NP 180 FORMERLY: KH 2" Rp 2 Manually operated; Nickel-plated brass body. Replaced by FORMERLY: B Ball Valve 2 RP Rp 2 Manually operated; 5bar E; Hard hrome Plated. FORMERLY: NP 180 Products:

243 180 Flanged Ball Valves - FKH Description DIN 40 to DIN 150 ball valve, Flange PN 16 as per DIN Application The ball valve is for manual shutoff suitable for natural gas, propane, butane, air and other inert gases. Version Harmonized ode: Specifications Max. operating pressure Ambient temperature rating 232 PSI (16 bar) +14 F to +212 F (-10 to +100 ) ast Iron; Full port KH DN DN. 40 Manually operated; ast Iron body. 1 1/2 nominal pipe size FORMERLY: KH DN DN. 50 Manually operated; ast Iron body. 2 nominal pipe size FORMERLY: B KH DN DN. 65 Manually operated; ast Iron body. 2 1/2 nominal pipe size FORMERLY: A Products:

244 180 Flanged Ball Valves - FKH KH DN DN. 80 Manually operated; ast Iron body. 3 nominal pipe size FORMERLY: A KH DN DN. 100 Manually operated; ast Iron body. 4 nominal pipe size FORMERLY: B KH DN , DN. 125 Manually operated; ast Iron body. 5 nominal pipe size FORMERLY: KH DN , DN. 150 Manually operated; ast Iron body. 6 nominal pipe size FORMERLY: Products:

245 180 Lug Butterfly Valves - BV Description DN40 to DN200 Lug Butterfly Valve, Flange PN16 as per DIN EN 1092 (PN10 for DN200). Application The butterfly valve is for manual shutoff suitable for natural gas, propane, butane, air and other inert gases. Version Harmonized ode: Specifications Max. operating pressure Ambient temperature rating 232 PSI (16 bar up to DN150) PSI (10 bar for DN200) -4 F to +140 F (-20 to +60 ) ast Iron Body - Stainless Steel Butterfly DN DN. 40 Manually operated; ast Iron body. 1 1/2 nominal pipe size 180 FORMERLY: DN DN. 50 Manually operated; ast Iron body. 2 nominal pipe size 180 FORMERLY: DN DN. 65 Manually operated; ast Iron body. 2 1/2 nominal pipe size FORMERLY: Products:

246 180 Lug Butterfly Valves - BV DN DN. 80 Manually operated; ast Iron body. 3 nominal pipe size 180 FORMERLY: DN DN. 100 Manually operated; ast Iron body. 4 nominal pipe size 180 FORMERLY: DN , DN. 125 Manually operated; ast Iron body. 5 nominal pipe size 180 FORMERLY: DN , DN. 150 Manually operated; ast Iron body. 6 nominal pipe size 180 FORMERLY: DN , DN. 200 Manually operated; ast Iron body. 8 nominal pipe size FORMERLY: Products:

247 Orifi ces and Venturis Product Model Page Brass Orifi ces & Venturi Meters US 140.1

248 600 Brass Orifices & Venturi Meters Description Orifice and Venturi Meters Application Low cost metering device that provides accurate setting of air or gas for optimum efficiency Link to flow curve Link to Orifice Data Link to Venturi Data Orifice alculations Version Harmonized ode: Specifications Max. operating pressure 250 PSI Other models available on request SBO-G-3 1/2 NPT Beta Ratio 0.301, Head Loss 89%, 33 scfh FORMERLY: SBO-H-1 1/2 NPT Beta Ratio 0.402, Head Loss 87%, 54 scfh FORMERLY: SBO-I-5 1/2 NPT Beta Ratio 0.500, Head Loss 85%; 87 scfh FORMERLY: B B Products:

249 600 Brass Orifices & Venturi Meters SBO-J /2 NPT Beta Ratio 0.703, Head Loss 73%; 214 scfh FORMERLY: SBO-F /2 NPT Beta Ratio 0.804, Head Loss 63%; 360 scfh FORMERLY: SBO-K /4 NPT Beta Ratio 0.152, Head Loss 90%; 16 scfh FORMERLY: B SBO-J /4 NPT Beta Ratio 0.536, Head Loss 90%; 31 scfh FORMERLY: SBO-A /4 NPT Beta Ratio 0.300, Head Loss 89%; 52 scfh FORMERLY: B SBO-B /4 NPT Beta Ratio 0.380, Head Loss 87%; 82 scfh FORMERLY: B SBO /4 NPT Beta Ratio 0.455, Head Loss 85%; 119 scfh FORMERLY: B SBO-D /4 NPT Beta Ratio 0.531, Head Loss 83%; 165 scfh FORMERLY: Products:

250 600 Brass Orifices & Venturi Meters SBO-B NPT Beta Ratio 0.536, Head Loss 79%; 275 scfh FORMERLY: B SBO NPT Beta Ratio 0.596, Head Loss 76%; 348 scfh FORMERLY: B SBO-D NPT Beta Ratio 0.655, Head Loss 73%; 450 scfh FORMERLY: B SBO-E NPT Beta Ratio 0.715, Head Loss 65%; 576 scfh FORMERLY: B SBO-F NPT Beta Ratio 0.632, Head Loss 58%; 720 s775 FORMERLY: SBO-X NPT Beta Ratio 0.417, Head Loss 80%; 159 scfh FORMERLY: B SBO /4 NPT Beta Ratio 0.634, Head Loss 65%; 700 scfh FORMERLY: SBO /4 NPT Beta Ratio 0.725, Head Loss 55%; 1030 scfh FORMERLY: B Products:

251 600 Brass Orifices & Venturi Meters SBO /4 NPT Beta Ratio 0.430, Head Loss 82%; 290 scfh FORMERLY: B SBO /4 NPT Beta Ratio 0.520, Head Loss 76%; 438 scfh FORMERLY: B SBO /2 NPT Beta Ratio 0.738, Head Loss 47%; 1380 scfh FORMERLY: SBO /2 NPT Beta Ratio 0.776, Head Loss 42%; 1608 scfh FORMERLY: SBO /2 NPT Beta Ratio 0.410, Head Loss 78%; 355 scfh FORMERLY: B SBO /2 NPT Beta Ratio 0.602, Head Loss 67%; 806 scfh FORMERLY: B SBO /2 NPT Beta Ratio 0.677, Head Loss 58%; 1084 scfh FORMERLY: B SBO NPT Beta Ratio 0.665, Head Loss 60%; 1689 scfh FORMERLY: B Products:

252 600 Brass Orifices & Venturi Meters SBO NPT Beta Ratio 0.725, Head Loss 48%; 2350 scfh FORMERLY: B SBO NPT Beta Ratio 0.479, Head Loss 78%; 794 scfh FORMERLY: SBO NPT Beta Ratio 0.590, Head Loss 68%; 1259 scfh FORMERLY: B SBO NPT Beta Ratio 0.392, Head Loss 84%; 650 scfh FORMERLY: VW /2" NPT Head Loss 10% FORMERLY: VW /2" NPT Head Loss 10% FORMERLY: VW " NPT Head Loss 10% FORMERLY: VW " NPT Head Loss 10% Products:

253 600 Brass Orifices & Venturi Meters VW NPT Beta Ratio 0.675, Head Loss 10%; 8485 scfh FORMERLY: VW " NPT Head Loss 10% VW NPT Beta Ratio 0.743, Head Loss 10%; scfh , FORMERLY: VW , " NPT Head Loss 10% FORMERLY: VW , " NPT Head Loss 10% FORMERLY: VW , " NPT Head Loss 10% VW " NPT Head Loss 10% VW " NPT Head Loss 10% FORMERLY: , , Products:

254 600 Brass Orifices & Venturi Meters VBS /4" NPT Head Loss 10% FORMERLY: VBS /4" NPT Head Loss 10% FORMERLY: VBS /2 NPT Beta Ratio 0.327, Head Loss 10%; 64 scfh FORMERLY: VBS /4" NPT Head Loss 10% FORMERLY: VBS /4" NPT Head Loss 10% FORMERLY: VBS /2" NPT Head Loss 10% FORMERLY: VBS " NPT Head Loss 10% FORMERLY: VBS NPT Beta Ratio 0.406, Head Loss 10%; 204 scfh FORMERLY: Products:

255 600 Brass Orifices & Venturi Meters VBS-513 1" NPT Head Loss 10% FORMERLY: VBS-648 1" NPT Head Loss 10% FORMERLY: VBS /4" NPT Head Loss 10% FORMERLY: VBS /4" NPT Head Loss 10% VBS /2" NPT Head Loss 10% FORMERLY: VBS /2" NPT Head Loss 10% FORMERLY: VBS NPT Beta Ratio 0.485, Head Loss 10%; 1043 scfh VBS-685 2" NPT Head Loss 10% FORMERLY: Products:

256 600 Brass Orifices & Venturi Meters VBS /2" NPT Head Loss 10% VBS /2" NPT Head Loss 10% O /2 Beta Ratio 0.708, Head Loss 45%; 294 scfh FORMERLY: B O /2" Beta Ratio 0.810, Head Loss 20% FORMERLY: O Beta Ratio 0.653, Head Loss 57%; 365 scfh FORMERLY: O " Beta Ratio 0.734, Head Loss 40% FORMERLY: O " Beta Ratio 0.794, Head Loss 30% FORMERLY: O Beta Ratio 0.575, Head Loss 66%; 1100 scfh FORMERLY: Products:

257 600 Brass Orifices & Venturi Meters O " Beta Ratio 0.619, Head Loss 60% FORMERLY: O " Beta Ratio 0.712, Head Loss 45% FORMERLY: O " Beta Ratio 0.804, Head Loss 22% FORMERLY: O " Beta Ratio 0.750, Head Loss 32% O " Beta Ratio 0.750, Head Loss 32% FORMERLY: O " Beta Ratio 0.800, Head Loss 25% FORMERLY: O " Beta Ratio 0.775, Head Loss 28% FORMERLY: O " Beta Ratio 0.792, Head Loss 25% FORMERLY: , , Products:

258 600 Brass Orifices & Venturi Meters O " Beta Ratio 0.800, Head Loss 25% PRIE ON REQUEST FORMERLY: Products:

259 Gas Train Systems Product Model Page Assembly Fees US/EU onfi guration Sheets DMV 701/702/703 US DMV 704/525/5 US Gas Train Request US/EU 150.4

260 GAS TRAIN SYSTEMS Karl Dungs, Inc. is an ISO 9001:2008 and PED 97/23 E [Pressure Equipment Directive] design and manufacturing facility for your gas train system requirements. Our production capabilities can handle systems up to 10 diameter [DN 250] and up to 100 Psig, including wiring to junction boxes. Specifi c solutions studied on request. Model/tech data Unit List Qty Assembly fee for modular DMV systems for U.S. & anadian installation. Includes DMV 701/702/703, FRI, Pressure Switches, VPS & basic mounting hardware accessories (visual indicator, PI, adaptors, test nipples, coil swaps, lights and spring installation included). For other component additions contact ustomer Service ( ) for price quote. $ ea Drawing: 3D.iges or.ipt format $150 only applies to Modular systems, other drawings, P.O.R. Reference DMV 701/702/703 Series onfi guration Sheet p Reference DMV 704/525/5 Series onfi guration Sheet p Assembly & engineering fee for modular DMV confi guration for Europe, Russia, Australia, Asia and all other gas consuming regions. Includes 3D drawing in.iges or.ipt format. P.O.R. Reference Gas Train Request p Manufacturing & engineering fee for Engineered Gas Systems to meet the requirements of most global installation standards and gas consuming countries. Includes 3D drawing in.iges or.ipt format. P.O.R. Reference Gas Train Request p

261 ONFIGURATION SHEET FOR GAS ASSEMBLIES Rev.7 onfiguration for DMV 701/702/703 ustomer s Name: Flow Direction Left to Right Right to Left Low Switch FRI Front (STANDARD with regulator) Upstream flange (STANDARD if no regulator) Mount to 1/4 NPT adapter (225047) Port 1 of DMV High Switch DMV Downstream flange (STANDARD) DMV Port 3 Front (Port 3 adapter required ) Mount to 1/4 NPT adapter (225047) Visual Indicator (266949) Valve 1 (STANDARD) Valve 2 VPS Front (STANDARD) Back (High Switch on Port 3 Front) DMK/DMA Mount to downstream Flange (Standard) Mount to DMK only Ship loose, unassembled 1/4 NPT Adapter (225047) Upstream flange (STANDARD) Front side (port 1) of DMV Back side (port 1) of DMV Downstream Flange of DMV KDI Shipment Number: Special Instructions Ports Diagram Examples Flow directions Left-to-Right STANDARD with VPS DMK butterfly valve Right-to-Left Other (Specify location!) 1/2 NPT adapter (STANDARD on front) (225043) Install Spring Into Regulator Spring for Regulator (Ship Loose) Test Nipple (STANDARD back ports 2 and 3) (219008) Test Nipple Ship Loose (219008) Additional Items requiring creation of PN at order entry Drip leg (Always on inlet side Not painted) Inlet ball valve (Locking version) Inlet ball valve (Non-Locking) Outlet ball valve (Non-Locking) Pressure Gauge (Inlet) Requires Pressure Gauge (Outlet) Requires This gas system will be manufactured as per the onfiguration Sheet for Gas Systems Drip Leg and ball valves Installed Requires part number creation at order entry Drip Leg ball valves and gauges Installed Requires part number creation at order entry Submitted and acknowledged by: Date: Assembler: hecker:

262 ONFIGURATION SHEET FOR GAS SYSTEMS Rev. 8 onfiguration for 704/525/5 Series ustomer s Name: Flow Direction DUSA Part/Ship Number: Special Instructions Left to Right Right to Left High Switch Front Port 5 (Standard) Back Port 5 Port 7 (Outlet Flange DMV 525/704 Only) Low Switch Front Port 1 (Standard) Back Port 1 Port 6 (Inlet Flange DMV 525/704 Only) Showing Valves Ports Flow directions PI (an be mounted on both valves) Valve 2 (STANDARD) Valve 1 Visual Indicator (an be mounted on both valves) Valve 1 (STANDARD) Valve 2 VPS (Fitted on port 2-3) Front (STANDARD) Back 1 NPT Vent Line Adapter (243760) Back port 4+5 (STANDARD) Front Port 4+5 1/2 NPT Pilot Line Adapter (225043) Back port 4+5 (STANDARD) Front Port 4+5 Other (Specify location!) Install Spring into Regulator Spring for Regulator (Ship Loose) Test Nipples (STANDARD on back 3 and 5) (219008) Test Nipple Ship Loose (219008) 1/2 BSP/NPT adapter on FRS vent port (231945) This gas system will be manufactured as per the onfiguration Sheet for Gas Systems Submitted and acknowledged by: Date: Assembler: hecker: 150.3

263 Gas Train Request ustomer/ompany ontact person Street Post ode + Town Project description Telephone Fax Application Installation site (country) ode compliance requirement Information entered by Date omponents and functional sections of a gas train Pressure regulation part Volume flow measurement part Safety part Accessories Butterfly valve Rotary meter Single solenoid valves Single fuel Ball valve high pressure side Double solenoid valves Dual fuel / Tandem Filter low pressure side Bypass valves Expansion joints Pressure regulator Volume corrector Valve proving system orrugated hoses Manometer... pcs. Auto. Pressure switch min. Ignition valves Test burner Manual Pressure switch min. Visual position indicator Auto. Pressure switch max. Proof of closure Manual Pressure switch max. Deflagration arrester M Edition Nr Data for gas train calculation 1 Gas type 9 min. Gas volume flow [SFH] 2 Gas temperature [Degrees F] 10 max. Gas volume flow [SFH] 3 Specific gravity 11 Electrical voltage [VA, VD, Hz] 4 alorific value [BTU/SFH] 5 max. Operating pressure p max. [PSI] 6 min. Inlet pressure [PSI] 7 max. Inlet pressure [PSI] 12 Electrical degree of protection [NEMA] 13 Wiring Terminal box 14 Hazardous location [Group/lass] 15 Further information 8 Outlet pressure at the end 1 1 of the gas train [PSI] 150.4