ICAO Provisions: Obligations for Certification Annex 6 Document 8335

Transcription

1 AFI-CIS Inspectors Refresher Training (Operations/Airworthiness) Addis Ababa, Ethiopia February 2016 ICAO Provisions: Obligations for Certification Annex 6 Document 8335

2 Objective Brief Overview: Regulatory requirements related to AOC Chicago Convention Annex 6 Part I International Air Transportation Aeroplanes Ninth Edition July 2010 ICAO Document 8335 Manual of Procedures for Operations Inspection, Certification and Continued surveillance Fifth Edition, 2010 Five Phases of Certification 2

3 Chicago Convention 3

4 Articles under the Convention Article 3: Applicability to civil aircraft Article 33: Recognition of certificates and licences Article 37: Adoption of international standards and procedures Article 39 (b): Endorsement of certificates and licences Article 40:Validity of endorsed certificates and licences 4

5 Other Relevant Articles Article 12: Rules of the air Article 31 : Certificates of Airworthiness Article 16: Search of aircraft Article 38: Departures from international standards and procedures 5

6 Standards and Recommended Practices ICAO Standard Any specification for physical characteristics, configuration, material, performance, personnel, or procedure, the uniform application of which is recognized as necessary for the safety or regularity of international air navigation and to which Contracting States will conform in accordance with the Convention; in the event of impossibility of compliance, notification to the Council is compulsory under Article 38. ICAO Recommended Practice Any specification for physical characteristics, configuration, material, performance, personnel, or procedure, the uniform application of which is recognized as desirable in the interest of safety, regularity, or efficiency of international air navigation, and to which Contracting States will endeavor to conform in accordance with the Convention. 6

7 Supplement to Annex 6 Supplement to Annex 6 that identifies those Contracting States that have notified ICAO of differences. 7

8 Notification of Differences Form 8

9 Article 83 and 83 bis 9

10 Regulatory Guidance Annex 6, Part 1 International Commercial Air Transport Aeroplanes Annex 8 Airworthiness of Aircraft Document 8335 ICAO s Manual of Procedures for Operations Inspections, Certification and Continued Surveillance Document 9734 ICAO s Safety Oversight Manual 10

11 QUESTION In which ICAO Publication will you find the requirement (Standard) for the issuance of a valid AOC, by the State of the Operator? ANSWER: Annex 6, P1, Standard

12 QUESTION As an AFI-CIS Inspector, in which ICAO publication would you find the list and description of the required attachments to the Formal Application for an AOC? ANSWER: ICAO Doc 8335 (Manual of Procedures for Operations Inspections, Certification and Continued Surveillance.) 12

13 QUESTION Where will you find an explanation of acceptance and approval actions to be taken during the document evaluation / compliance phase of the AOC certification process? ANSWER: Annex 6, Standard

14 QUESTION: How do we know which documents are required to be approved after their technical evaluation? ANSWER: An 6, PI, Att E 14

15 Safety Oversight Obligations ICAO CONVENTION ARTICLES, ANNEXES, SARPs, DOCUMENTS Member State U.S. Meravia State Aviation Law U.S. Aviation Law Model Law CAA Director General FAA Administrator Director Civil Aviation State Aviation Regulations Code of Federal Regulations (CFRs) MCARs Inspector Technical and Industry Guidance Inspector Handbooks/ Directives and Advisory Circulars MDs and MAPs 15

16 Inspector Duties Resolution of Safety Issues 16

17 The Five Phases of Certification 17

18 Pre-Application Phase The applicant seeking an air operator certificate makes the initial inquiry for application. Usually, a meeting is held and the applicant is supplied with information needed to complete the application. 18

19 Formal Application Phase At this point, the prospective operator s application is reviewed by inspectors and a formal application meeting is conducted with the prospective operator or applicant. 19

20 Document Evaluation Phase The inspector performs an in-depth review of the application and all required attachments. This is to ensure that the applicant s documents and manuals meet all CAA standards and requirements. 20

21 Demonstration/Inspection Phase In this phase the applicant demonstrates its operation to the inspector in accordance with applicable regulations as defined in the applicant s inspected documents and manuals. 21

22 Certification Phase This is the final phase of the certification process. The inspector reviews all the certification findings and the certificate and operation specifications (OpSpecs) are issued to the operator. 22

23 Summary Chicago Convention Annex 6 to the Chicago Convention (AOC) State Safety Oversight Obligations Critical Elements of an Oversight System Safety Management Systems Inspector Duties Five Phases of Certification 23

24 NEXT: MODULE 6 AOC INITIAL ENQUIRY, PHASE 1. PRE-APPLICATION 24