Secure Stack Pro Modular Double-Wall Positive Pressure Chimney Boiler Breeching & Stack and Engine Exhaust Grease Duct

Transcription

1 Secure Stack Pro Modular Double-Wall Positive Pressure himney Boiler Breeching & Stack and Engine Exhaust Grease Duct (US) (anada)

2 Secure Stack Pro The Secure Stack Pro Series, Models SL, AX1, IX1, IX2, IX4, and IX3Z venting systems are designed to offer the ultimate in installation convenience and versatility for a variety of applications. ertified for commercial chimney, boiler breeching & stack, diesel exhaust, and Grease Duct applications. Thick-gauge material for the inner pipe and coupling provides a strong and rigid assembly. Self-centering flue extension significantly simplifies and accelerates the installation process. A TRADITION OF EXELLENE For over 50 years, Security himneys has been an innovator in the venting field and a market leader in North America. Instrumental in the company s growth has been an ongoing focus on product improvement and the introduction of new, innovative products. The Secure Stack Pro venting systems are prime examples of our constant quest for more costeffective, versatile and reliable product solutions. DESIGNED WITH PERFORMANE IN MIND Available in sizes from 5" to 36" diameters, the IX models offer a choice of 1", 2", 4", or 3" insulated double wall chimneys, and the AX1 offers a 1 air insulated product. For premium corrosion resistance and durability, the inner flue is constructed from thick 304 or 316 Stainless Steel. This is coupled with a 0.024" thick 304 Stainless Steel or Galvalume (Aluminum-zinc coated) steel outer casing. IX models are is lined with the highest-quality AES Wool insulation, densely packed to ensure low heat loss, maximum draft, and the lowest clearance to combustible materials. MH MH MH LISTED TO STANDARDS: UL 103 UL 103HT UL S604 UL 959 UL 1978 UL IX3Z only AN/UL S662 UL except SL UL 1777 AN/UL S635 2 Security himneys

3 SEURITY HIMNEYS SEURE STAK PRO A POSITIVE PRESSURE SYSTEM The Secure Stack Pro Series Difference: Features Benefits Self-centering omponents line up easily and quickly Fast and efficient installations Thinner-gauge material on outside casing Lower weight Easier to install REFRATORY AES WOOL INSULATION Security himneys understands the needs of the industry and is always pushing the design envelope to embrace new technologies. With our dedicated effort to offer the best performing products, Secure Stack Pro Series utilizes Refractory Alkaline Earth Silicate (AES) Wool Insulation. AES Wool displaces the old ceramic fiber type insulations many manufacturers are still using today. The AES Wool featured in our products meets the requirements requested under NOTA Q and are exonerated from classification and labelling regulation in Europe. When compared to ceramic fiber, AES Wool insulation offers: Approximately 80% lower Biopersistance* half-life Superior thermal insulation properties Improved tensile strength, compression & resilience Increased energy efficiency, leading to significant weight and cost savings *Biopersistance is the ability of fibers to resist removal from the lungs by natural mechanisms (i.e., dissolution and breakage). eramic fiber insulation is classified as a lass 2 arcinogen in the European Union and classified as a possible carcinogen in the United States and anada (US) (anada) 3

4 TYPIAL ENGINE EXHAUST INSTALLATION Selection guide PRESSURE RATED HIMNEYS & VENT MODELS SL AX1 IX1 IX2 IX4 IX3Z DESRIPTION Single Wall Double Wall Double Wall Double Wall Double Wall Double Wall TYPE OF INSULATION none 1" Air Insulated 1" AES Wool 2" AES Wool 4" AES Wool 3" AES Wool LISTING UL 2561 UL 103 UL S604 UL 959 UL 1978 UL 2561 UL 103 UL S604 UL 959 UL 1978 UL 103 HT UL 103 UL 2561 UL S604 UL 959 UL 1978 UL 103 HT UL 103 UL 2561 UL S604 UL 959 UL 1978 UL 103 HT UL 103 UL 2561 UL S604 UL 959 UL 1978 UL 1978 UL 2221 UL S662 PRESSURE Positive (up to 60 w.c.) --- Neutral --- Negative ONSTRUTION WALL Flues asings THIKNESS 0.035" 0.024" DIAMETERS AVAILABLE 5" to 14" Increment of 1" 16" to 36" Increment of 2" OPTIONS OF MATERIALS 304, 316 Stainless Galvalume, 304 APPLIATIONS himneys Vents Stationary ombustion Engines Stacks Solid Fuel Burning Appliances Stationary Gas Turbines ommercial Fireplaces Building Heating Appliances Fume Exhausts / Venting 1 Air duct 1400 F himneys Grease Duct 1 - onsult appropriate authority to determine fume compatibility with stainless steels & silicone sealants 4 Security himneys

5 TYPIAL BOILER INSTALLATION Selection guide PART NUMBERS These instructions identify major model parts by name and part number. Example: IX1 36" length with inside diameter 14" made of SS inner liner and SS 304 outer casing: ode = IX1-14L36B. IX1-14 L36 B Model Dia. Part Material AX1 30 elbow with inside diameter 22 made of 304 inner flue and galvalume outer casing: ode = AX1-22E30E. AX1-22 E30 E " Model Dia. Part Material SL wall support for 8 diameter grease duct made of galvalume: ode = SL8WSE: SL 8 WS E Model Dia Part Material B E Material ode Designations Type 316 Stainless Steel Type 304 Stainless Steel Alu-Zinc coating (Galvalume) Example: IX1-6T90 IX1-6 = 6" inside diameter T90 = 90 Tee = 304/304 Inner/Outer Material Use only factory-supplied components. Failure to do so will void the certification and the warranty of the chimney system. EFFETIVE LENGTH AND THIKNESS The effective length is the length of the part when it is assembled. length L /8" L /8" L /8" L /8" Thickness for 5 to 36 Inner Wall: 0.035" Outer Wall: 0.024" Models IX3Z 5 TO 36 SL 5 TO 36 Material / Thickness Material Thickness Exterior Interior Exterior Interior 304 / Galvalume 304 / / (US) (anada) 5

6 TYPIAL GREASE DUT INSTALLATION Selection guide learance to ombustible (Unenclosed Surrounding) (from the outer band) Grease Duct - UL 1978 (500 F) AX1 IX1 IX2 and IX4 SL IX3Z * Dimensions are in inches Note: learance to non combustible is 0 for all models and diameter * 2 hr Fire Rated for IX3Z per UL 2221 Minimun Air Space LEARANE to Unenclosed ombustible Surroundings (adjacent to maximum of two walls). Building Heating Appliance & 1400 F himney Duct Model Flue Diameter learance to ombustible learance to Non-ombustible SL* 5 to AX1 IX1 (UL 103 Type HT 5 to 24 only) IX2 & IX4 (UL 103 Type HT 5 to 24 only) Dimensions are in inches *Building heating appliance only 5 to to to to to to to to to to to to to Security himneys

7 Engineering section The term Pressure Stack typically refers to positive pressure chimneys that can be used for boiler breeching and stack, as well as diesel and turbine exhaust, building heating equipment, industrial furnaces, processing equipment, kilns and ovens, and other heavy duty applications with high temperature exhaust requirements. In the United States, factory built chimneys are intended for use in accordance with NFPA 211, the Standard for himneys, Fireplaces, Vents, and Solid-Fuel Burning Appliances, and in accordance with models codes such as the International Mechanical ode, the International Residential ode, and the Uniform Mechanical ode. In anada, factory built chimneys are intended for use in accordance with the National Building ode of anada, Installation ode for Oil Burning Equipment, AN/SA-B139, and for Gas Burning Equipment, AN/GA-B149.1 and AN/GA-B Factory built chimneys are designed, tested, and certified for installation inside or outside of buildings, or both, to transport flue gases to the outside. Security himneys Secure Stack Pro series of modular double-wall positive pressure venting systems have been designed and engineered to not only meet, but exceed the rigorous requirements of many test standards Below is a brief summary of the standards that Secure Stack Pro was tested and certified under. For more details about the specifics of our Underwrites Laboratories (UL) product listings, consult the UL Online ertifications Directory. UL 103 BUILDING HEATING APPLIANE HIMNEY LISTING: Under this category, models SL, AX1, IX1, IX2, and IX4 have been determined suitable for venting flue gases at temperatures not exceeding 538 c (1000 f) under continuous operating conditions from gas, liquid, oil or solid fuel fired appliances. Also complies with operation (less than one hour) at temperatures not exceeding 740 c (1400 f) and brief operation (maximum 10 minutes) at temperatures not exceeding 906 c (1700 f). Building heating appliance chimneys are suitable for use with building heating appliances and low heat appliances as described in the chimney selection chart of national fire protection association (nfpa) standard no UL-103(HT) - STANDARD FOR FATORY-BUILT HIMNEYS FOR RESIDENTIAL TYPE AND BUILDING HEATING APPLIANES The UL-103 standard applies to factory-built chimneys intended for venting gas, liquid, and solid-fuel fired residential-type appliances and building heating appliances in which the maximum continuous flue-gas outlet temperatures do not exceed 1000 F (538 ). Tests included in this standard are designed to test the structural and thermal properties of the chimney and includes tests such as the Thermal Shock Test, Temperature Test (at 1000 F, 1400 F, 1700 F, and if required 2100 F). In order to qualify for the UL-103HT listing, a chimney that is tested under the UL-103 standard must successfully complete the requirements of the 2100 F (1149 ) Flue Gases Temperature Test, conducted 3 times. After being subjected to the tests listed, as applicable, a chimney shall be capable of being used further. The following results indicate compliance: (US) (anada) 7

8 Engineering section No part of the chimney has become damaged or permanently distorted to an extent that it or the chimney assembly does not continue to function as intended. The effectiveness of any required protective coating or finish on metal parts has not been reduced. A ceramic material shows no evidence of cracking, disintegration, or spalling to the extent that serviceability of any part of an assembly has been impaired. racks are not observable in porcelain enamel used as a required protective coating when the surface is examined under a microscope of 60 magnification. The reflectivity of a surface has not been impaired when the reflectivity is utilized to reduce the risk of fire. Burning or scaling of metal parts is not evident upon visual observation. The effectiveness of insulating material has not been reduced. Additional tests included in this standard are the Positive Pressure Applications Test, Draft Test, Vertical Support Test, Strength Tests (Impact, Longitudinal Force, Load Test for himney Elbows, Joint Load, and Joint Torsion Test), Wind Load Test, Rain Test, and other tests related to the components used in the chimney construction. UL STANDARD FOR 1400 DEGREE FAHRENHEIT FATORY-BUILT HIMNEYS This standard applies to factory-built 1400 degree Fahrenheit chimneys intended for venting gas, liquid, and solid-fuel-fired appliances in which the maximum continuous flue-gas temperatures do not exceed 1400 F (760 ). Similar in nature to UL-103(HT), this standard covers many of the same tests designed to test the structural and thermal properties of the chimney. UL-2561 is intended for chimneys that will be used in a more industrial application where flue gas exhaust temperatures are higher, and therefore includes a Temperature Test at 1400 F and 1800 F. UL-S604 - STANDARD FOR FATORY-BUILT TYPE A HIMNEYS This standard applies to Factory-Built Type 'A' himneys which do not require field fabrication. They are for use with gas and liquid fuel-fired residential appliances and building heating equipment, where the appliance or equipment flue-gas temperatures do not exceed 540. They are intended for use in accordance with the National Building ode of anada, Installation ode for Oil Burning Equipment, AN/SA-B139, and for Gas Burning Equipment, AN/GA-B149.1 and AN/GA-B Tests included in this standard are designed to test the structural and thermal properties of the chimney and includes tests such as the Thermal Shock Test, Temperature Test (at 540 and 760 ), Soot Burnout, Draft Test, Support Test, Strength Test, Wind Load Test, and other tests related to the components used in the chimney construction. UL/ORD HIMNEYS, INDUSTRIAL 540 AND 760 This standard applies to Factory-Built industrial chimneys intended for use with certain process equipment and large oil or gas burning building heating appliances normally producing flue gas temperatures of 540 or 760, or less as applicable. Tests included in this standard are designed to test the structural and thermal properties of the chimney and include more stringent tests compared to UL-604, including the Thermal Shock Test, Temperature Test (at 540 and 760, and if applicable 925 and 980 ), Support Test, Strength Test, Wind Load Test, and other tests related to the components used in the chimney construction. UL 1978 STANDARD FOR GREASE DUTS This standard applies to factory-built grease ducts, and grease duct assemblies that are intended to be installed at reduced clearances where 18 inch clearance is specified in NFPA 96 and the International Mechanical ode. These requirements also cover modular grease duct assemblies, unwelded connections between adjoining duct parts, fittings, access doors, and the like intended for use with grease ducts installed in accordance with NFPA 96 and the International Mechanical ode. 8 Security himneys

9 Engineering section UL 2221 STANDARDS FOR TESTS OF FIRE RESISTIVE GREASE DUT ENLOSURE ASSEMBLIES These tests are intended to determine the fire resistance of grease duct enclosure assemblies. These requirements limit the combustibility, the surface flammability, and the smoke generation potential of the coverings used to enclose the grease duct. In addition, these requirements evaluate the effectiveness of the combination of the grease duct and the enclosure as a fire rated enclosure system and through penetration firestop system, as well as the enclosure's effect on the grease duct. UL STANDARD FOR HIMNEY LINERS These standards cover metallic and nonmetallic chimney liners intended for field-installation into new or existing masonry chimneys that are used for the natural draft venting of ategory I gas-fired, Type L vented oil-fired, and solid-fuel-fired residential-type appliances in which the maximum continuous flue-gas outlet temperatures do not exceed 1000 F (538 ). AN/UL S635 - STANDARD FOR LINING SYSTEMS FOR EXISTING MASONRY OR FATORY-BUILT HIMNEYS AND VENTS This Standard covers lining systems for existing masonry chimneys, which may or may not incorporate a liner of fire-clay tile, or factory-built chimneys and vents. AN/UL S662 - STANDARD FOR FATORY-BUILT GREASE DUT This Standard covers factory-built grease ducts and grease duct assemblies that are intended to be installed as alternatives to the grease ducts constructed of all welded 1.37 mm carbon steel or 1.09 mm stainless steel required by UL-S650, Standard for the Installation and Performance of Ventilation and Fire Suppression Systems for ommercial and Institutional ooking Equipment. Security single wall and double wall model venting systems are Listed by Underwriters Laboratories, Inc. (UL) in the following product categories and in the diameters indicated: Model SL (Single wall) UL Building Heating Appliance himney UL Grease Duct UL S662 - Grease Duct 5"- 36" ID 5"- 36" ID ADDITIONAL APPLIATIONS Models SL, AX1, IX1, IX2, and IX4 are also suitable for negative, neutral or positive pressure pre-fabricated piping systems intended for use in a variety of applications including but not limited to the following: Fume Venting, hutes, Particle onveying, Dryer Vents and Ventilation Ducts. Model AX1 (Double wall, 1 air insulation) UL Building Heating Appliance himney UL Fahrenheit himney UL Grease Duct UL S662 - Grease Duct Model IX1, IX2, IX4 (Double wall, fiber insulation) UL Building Heating Appliance himney UL 103 HT - Building Heating Appliance himney(type HT) UL Fahrenheit himney UL Grease Duct UL S662 - Grease Duct Model IX3Z (Double wall, fiber insulation) UL Grease Duct UL Fire Resistant Enclosure AN/UL S662 - Grease Duct 5"- 36" ID 5"- 36" ID 5"- 36" ID 5"- 36" ID 5"- 24" ID 5"- 36" ID 5"- 36" ID 5"- 36" ID 5"- 36" ID 5"- 36" ID MIXING PARTS Model SL, AX1, IX1, IX2, IX4, and IX3Z may be intermixed within a system, assuming proper clearances are maintained for respective components. When penetrating a roof, appropriate roof penetration components must be used. Do not use Model SL to penetrate through a wall, floor or roof. Security Models SL, AX1, IX1, IX2, and IX4 chimneys may penetrate a combustible floor, wall, or roof using the appropriate parts and openings sizes. NOTE: Do not enclose with combustible materials In the case of a fire rated enclosure made of non-combustible or limited combustible construction, the minimum clearance with the Model SL must be 6" or as required by local code (US) (anada) 9

10 Zero learance Grease Duct Security s design is sure to be the industry s choice for new restaurant construction or custom remodelling. What Sets Us Apart Integrated centering sleeve stabilizes and helps align the sections during installation. Sleeve also provides a stop for high temperature sealant to keep it in its intended location creating air and moisture tight joints. Extra-large spacing between outer wall sections allows more space for a quick and easy installation of the inner "V" Band. onstruction Integrated, modular grease duct with insulation and outer wall (that qualifies as 2 Hour fire resistive enclosure) eliminates need for a separate, large and expensive fire rated chase or two layers of fire rated wrap all while occupying a smaller footprint in expensive commercial properties. Available in 5" to 36" Diameters. Single-Wall (SL) or Double-Wall Zero learance (IX3Z) with 3 fiber insulation. Listing Security himneys International, Ltd. Model grease ducts have been tested and listed by UL to UL/UL Standards. UL 1978 (Models IX3Z and SL) Grease Duct and UL 2221 (Model IX3Z only). (2 HR Fire Rating). IM, UM and NFPA96 ode ompliance. Grease Duct is subjected to rigorous and stringent requirements of the UL 1978 & UL 2221 standard, including continuous firing at 500 F (260 ), plus 30 minute firing at 2000 F (1093 ). 10 Security himneys

11 0" LEARANE GREASE DUT NEW FATORY-BUILT GREASE DUT Features Benefits Modular stainless steel construction Installs in sections with no field welding required. Highly corrosion resistant. Extremely durable. Round tubular design Maintains structural integrity significantly longer than a rectangular welded steel product. Superior flow achieved with round tubular design. Easier to clean and reduces chance of fire from grease accumulation. Eliminates corners where grease accumulation is most severe and difficult to remove. 0 clearance to combustible materials Reduces space requirements and provides ease of mind for clearances. Two hour fire rating for the Model IX3Z Eliminates need for a large, expensive, separate, fire-rated enclosure or multiple, field-applied layers of fire-rated wrap materials. Extra large spacing between outer wall sections Allows for quick and easy installation of the securing band. SL single-wall available (18" clearance) Possibility to switch from Zero learance (IX3Z) to Single-Wall (SL) or vice versa, within a grease duct run. Fast and easy installation. Less expensive. Lighter weight (US) (anada) 11

12 Grease Duct Specifications Factory-Built Grease Duct Systems Self entering Flue Extension Wall Insulation Application Restaurant Grease Ducts ooking Appliances Ventilation Hoods Pizza Oven Exhaust Maximum Operating Temperatures 500 F ontinuous 2000 F Intermittent Ribbed Spacers For Rigidity Outer asing With Flange For Additional Rigidity Assembly Blanket insulation is already installed in the portion that lines up with the outside casing. We provide an insulation band to be field-installed behind the outside band. More Space At Joint To Install Inner Band Goes together with the inner flange and inner locking band (with centering extension) and an outer band. For Security factory-built grease ducts listed to UL 1978, install at a duct slope not less than 1/16 unit vertical slope in 12 units of horizontal toward the hood or toward the grease reservoir. Where Security grease ducts listed to UL 1978 exceed 75 feet in length, the slope shall not be less than 3/16 unit vertical slope in 12 units horizontal. This minimum slope is a result of tests and/or analysis performed by Underwriters Laboratories, where factory-built grease duct was compared to rectangular field-applied grease duct for performance of flow characteristics. onsult with AHJ for acceptance of this alternate method. Openings for Model IX3Z Inside Diameter (A) Roof / Floor () Wall () 5 to 36 Inside + 8 Inside + 8 *Dimensions are in inches 12 Security himneys

13 Grease Duct Specifications PRE-FABRIATED, FIRE-RESISTANE RATED GREASE DUT FOR REMOVAL OF GREASE AND SMOKE LADEN VAPORS PART 1- GENERAL 1.1 SUMMARY Listed, double-wall, prefabricated, modular, fire-resistance rated grease duct for use with commercial cooking equipment for removal of grease and smoke laden vapors from kitchen hoods (as described in NFPA 96), at a maximum temperature of 500 F under continuous operation. 1.2 REFERENE STANDARDS A. The latest published edition of a reference shall be applicable to this Project unless identified by a specific edition date. B. All materials, installation and workmanship shall comply with the applicable requirements and standards addressed within the following references.. Underwriters Laboratories, Inc. (UL): a. omply with applicable UL safety standards; provide products which have been UL listed and labeled. 1) UL 1978 Standard for Grease Ducts 2) UL 2221 Standard for Tests of Fire Resistive Grease Duct Enclosure Assemblies D. National Fire Protection Association (NFPA): a. omply with NFPA 96 Standard for Ventilation ontrol and Fire Protection of ommercial ooking Operations E. International ode ongress (I) a. omply with International Mechanical ode (IM) and International Building ode (IB) (if applicable to the project / site) F. International Association of Plumbing and Mechanical Officials (IAPMO) a. omply with Uniform Mechanical ode (if applicable to the project / site) 1.3 QUALITY ASSURANE A. Source Limitations: Obtain listed system components through one source from a single manufacturer. B. Must install duct in accordance with terms of NFPA 96, local code and manufacturer s installation instructions. 1.4 WARRANTY A. Listed grease duct shall have a limited lifetime warranty to begin at the date of installation. PART 2- PRODUTS 2.1 GENERAL A. All materials shall meet or exceed all applicable referenced standards, federal, state and local requirements, and conform to codes and ordinances of Authorities Having Jurisdiction. 2.2 AVAILABLE MANUFATURERS A. Listed and lassified (Fire Resistance Rated) Double-Wall insulated grease duct shall be model IX3Z, as manufactured by Security himneys (US) (anada) 13

14 Grease Duct Specifications 2.3 LISTED GREASE DUT A. The grease duct shall be insulated, double-wall factory-built type for use with Type 1 kitchen hoods, as described in NFPA 96 for the transportation of air and grease-laden vapors from commercial cooking operations. B. Product Description: a. Zero learance, Two (2) Hour Fire-Resistance rated model IX3Z Grease Duct by Security himneys. b. All section joints shall incorporate a self-centering feature to ensure proper alignment of mating flanges and proper spacing between the inner wall (flue) and the outer wall (casing). c. The inner wall (flue) shall be laser or plasma welded. d. System shall be rated for continuous operation at 500 F and intermittent operation at 2000 F. e. All components of the grease duct system shall be provided by the manufacturer to ensure the system meets the requirements of the listing including duct supports, guides, fittings, cleanouts, and expansion joints required to install the duct. f. System shall be designed to provide access for inspection and cleaning of each change of duct direction, permit drainage of grease residue through a duct section and enable the system to allow various types of fire suppression equipment to be installed into the grease ductwork. g. Grease duct shall be certified to: i. UL 1978 Grease Ducts for Restaurant ooking Appliances, and ii. UL 2221 Standard for Tests of Fire Resistive Grease Duct Enclosure Assemblies h. The duct sections shall be constructed of an inner wall and an outer wall with fiber blanket insulation between the walls. i. The inner wall shall be constructed of Types 304, or 316 stainless steel through 36 inch diameter materials: inch thick inner wall. ii. The outer wall shall be constructed of Galvalume steel, Aluminized steel or Types 430, 304, or 316 stainless steel thru 36 diameter inch materials: inch thick outer wall. iii. The duct shall include a minimum 3 thickness of 10 pcf density of body-soluble, high temperature capable, non-refractory fiber insulation between the inner and outer walls. 14 Security himneys

15 Grease Duct Specifications PART 3-EXEUTION 3.1 INSTALLATION OF FATORY-BUILT GREASE DUT A. Locate to comply with minimum clearances from combustibles and minimum termination heights according to product listing or NFPA 96, whichever is most stringent. B. The installation shall be in accordance with the manufacturer s installation instructions and shall conform to all applicable state and local codes.. Inner pipe joints shall be held together by means of formed V bands and sealed with S650 Sealant. D. onnection to the hood shall be made with a round hood collar or a square-to-round transition. E. urb mounted fans shall incorporate a fan adaptor plate. F. All construction and supporting of the kitchen ventilation system will be in accordance with Security himneys installation instructions. G. Store grease duct sections inside or covered adequately to protect from weather or accidental damage. H. The entire grease duct system from the appliance to the termination, including all accessories, except as noted, shall be from one manufacturer (US) (anada) 15

16 Table of ontents s s 18 Adjustable s 18 Variable s 19 Bellow Lenths 19 Drain Lenths 20 Horizontal s 20 Nozzel s 20 Elbows 3 Elbows Elbows Elbows Elbows Elbows Fan Adaptor 49 Accessories Relief Valve 49 Damper 49 Supports Half Angle Ring Full Angle Ring 52 Anchor Plate 52 Anchor Plate 53 Heavy Duty Wall Supports Heavy Duty Wall Guides Heavy Duty Floor Guides 59 Guy Ring 60 Tees 90 Tees Tees 36 Double 45 Tees Y Tees 39 Lateral Tees Tee Accessories Tee ap 43 Drain Tee ap 43 onnections - Starting Adaptors Tapered Increaser Adaptors 44 Eccentric Tapered Increaser Adaptors 44 Step Increaser Adaptors 45 Tapered Reducer Adaptors 45 ANSI Flange Adaptors 46 Single Wall Adaptors 46 Single Wall Adaptors with Test Prot 47 Halft Universal Flange 47 Square to Round or Round to Square 48 Eccentric Square to Round or Round to 48 Square Thimbles Roof/Floor Thimble Wall Thimble Flashings Flashing Adjustable Flashing Storm ollars 67 Terminations Finishing one 68 onic Rain ap No Loss ap 70 Flip Top 70 Miter ut 71 Join Assembly - Replacement Parts Locking Inner "V" Band 72 Outer Band 72 entering Flue Extension 72 Half Outer Band 72 Duct losure Band 73 Transition Outer Band Security himneys

17 Table of ontents Sealant 73 Grease Duct Accessories No Tool Inline Access Door 74 Through Penetration Firestop Kit Tees and 90 Tees with a Dam Tees with Nozzle 77 No Tool Access Tee ap 78 Drain Bucket 78 Round Flanged Hood Adaptor 78 Square to Round Adaptor 79 Grease Duct Roof/Floor Thimble Grease Duct Wall Thimble (US) (anada) 17

18 s (L12, L18, L24, L36) Used as standard duct lengths. Available in sizes from 5" to 36". For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6" insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). 2 1/4 ENTERING FLUE EXTENSION Gas FLOW 2 1/4 5 to /8 SL (Single Wall) AX1 (1" air) / IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) B (O.D.) Product ode SLL12 B (O.D.) AX1-L12 Product ode IX1-L12 B (O.D.) Product ode IX2-L12 B (O.D.) Product ode IX4-L12 B (O.D.) Product ode IX3Z-L12 5 to /8 SLL AX1-L18 IX1-L IX2-L IX4-L IX3Z-L18 5 to /8 SLL24 AX1-L24 IX1-L24 IX2-L24 IX4-L24 IX3Z-L24 5 to /8 SLL36 AX1-L36 IX1-L36 IX2-L36 IX4-L36 IX3Z-L36 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts: K = 0.25 (eff. length [ft] / [in]) Adjustable s (LA) Used to add length. Adjust to fit odd dimensions and compensate for thermal expansion. Suitable for application on low positive pressure system with less than 1" water column. For SL: One (1) Locking Inner "V" Band (BSI), one (1) Graphite packing kit on a inner liner, a special tool for proper installation of Graphite packing, and hardware. For AX1: One (1) Locking Inner "V" Band (BSI), one (1) Graphite packing kit on a inner liner, a special tool for proper installation of Graphite packing, two half casing, and hardware. For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) Graphite packing kit on an inner liner, a special tool for proper installation of Graphite packing, two half casing, insulation pad, and hardware. For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) Graphite packing kit on a inner liner, a special tool for proper installation of Graphite packing, two half casing, insulation pad and hardware. SL (Single Wall) AX1 (1" air) IX1 (1" Insulated) Product ode IX2 (2" Insulated) Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts: K = 0.25 (eff. length [ft] / [in]) IX4 (4" Insulated) IX3Z (3" Insulated) 5 to /4 to 28 3/8 SLLA AX1-LA IX1-LA IX2-LA IX4-LA IX3Z-LA 18 Security himneys

19 s Variable s (LV) Used to adjust to fit odd dimensions. Not used for thermal expansion. an be used in positive pressure applications. For SL: One (1) Locking Inner "V" Band (BSI), one (1) collar kit on the inner liner with a special locking band (BS), and hardware. For AX1: One (1) Locking Inner "V" Band (BSI), one (1) collar kit on the inner liner with a special locking band (BS), two half casing, and hardware. For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) collar kit on the inner liner with a special locking band (BS), two half casing, insulation pad, and hardware. For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) collar kit on the inner liner, two half casing, insulation pad and hardware. SL (Single Wall) AX1 (1" air) IX1 (1" Insulated) Product ode IX2 (2" Insulated) Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts: K = 0.25 (eff. length [ft] / [in]) IX4 (4" Insulated) IX3Z (3" Insulated) 5 to 36 7 to 28 1/2 SLLV AX1-LV IX1-LV IX2-LV IX4-LV IX3Z-LV Bellow s (LB) Recommended for Diesel Engines / Turbine Exhausts. May be used in place of the Adjustable s (LA) as an expansion joint to compensate for linear thermal expansion in chimney systems. Maximum compressive travel is 3. NOTE: NOT AVAILABLE FOR MODEL IX3Z For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, one (1) Outer Band (BSE), a special tool for proper installation of Graphite packing, two half casing, insulation pad, and hardware. SL (Single Wall) AX1 (1" air) Product ode IX1 (1" Insulated) IX2 (2" Insulated) Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts: K = 0.25 (eff. length [ft] / [in]) IX4 (4" Insulated) 5 to /16 SLLB AX1-LB IX1-LB IX2-LB IX4-LB (US) (anada) 19

20 s Drain s (DL) Used to drain grease or condensation from inner wall on vertical runs. 1" NPT nipple. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). 1" NPT Nipple 5 1/8 SL (Single Wall) AX1 (1" air) IX1 (1" Insulated) Product ode IX2 (2" Insulated) IX4 (4" Insulated) IX3Z (3" Insulated) 5 to /16 SLDL AX1-DL IX1-DL IX2-DL IX4-DL IX3Z-DL Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts: K = 0.25 (eff. length [ft] / [in]) Horizontal Drain s (HDL) Used as a horizontal drain section on horizontal runs. 1" NPT nipple. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2 and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). SL (Single Wall) AX1 (1" air) IX1 (1" Insulated) Product ode IX2 (2" Insulated) Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts: K = 0.25 (eff. length [ft] / [in] IX4 (4" Insulated) IX3Z (3" Insulated) 5 to /16 SLHDL AX1-HDL IX1-HDL IX2-HDL IX4-HDL IX3Z-HDL 5 1/8 DAM Gas FLOW 1" NPT Nipple Nozzle s (NL) Used as a test port. 1" NPT nipple, no cap. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) 6 insulation. For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). SL (Single Wall) AX1 (1" air) Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts: K = 0.25 (eff. length [ft] / [in]) 20 Security himneys IX1 (1" Insulated) Product ode IX2 (2" Insulated) IX4 (4" Insulated) IX3Z (3" Insulated) 5 to /16 SLNL AX1-NL IX1-NL IX2-NL IX4-NL IX3Z-NL 1" NPT Nipple 5 1/8

21 Elbows 3 Elbows (E3) Used to change direction of the duct or to provide offset. 3 Elbows provide also a slope for horizontal run. omes alone (E3) or in pairs as a kit (EK3). The Elbow Kit (two elbows) can establish many different degrees combined with other elbows. The kit may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One Locking "V" Band (BSI), one entering Flue Extension (PR-0794) and one Locking Outer Band (BSE) included. 3 Elbows - SL (Single Wall) Rise Two- Elbows One Elbow SL Product ode Two Elbows SL Two-Elbow OFFSET 5 to 7 3 7/16 3/16 6 7/8 3/8 SLE3 SLEK3 8 to /2 3/16 7 3/8 SLE3 SLEK3 12 to /16 3/16 7 1/8 3/8 SLE3 SLEK3 18 to /8 3/16 7 1/4 3/8 SLE3 SLEK3 22 to /16 3/16 7 3/8 3/8 SLE3 SLEK3 28 to /4 3/16 7 1/2 3/8 SLE3 SLEK3 32 to /16 3/16 7 5/8 3/8 SLE3 SLEK3 OFFSET /8 3/16 7 3/4 3/8 SL36E3 SL36EK3 3 Elbows - AX1 (1 Air Insulated) / IX1 (1" Wool Insulated) 3 RISE Rise Two- Elbows One Elbow AX1 Two Elbows AX1 Product ode One Elbow IX1 Two Elbows IX /8 1/4 8 3/4 1/2 AX1-E3 AX1-EK3 IX1-E3 IX1-EK3 6 to 9 4 7/16 1/4 8 7/8 1/2 AX1-E3 AX1-EK3 IX1-E3 IX1-EK3 10 to /2 1/4 9 1/2 AX1-E3 AX1-EK3 IX1-E3 IX1-EK3 16 to /16 1/4 9 1/8 1/2 AX1-E3 AX1-EK3 IX1-E3 IX1-EK3 20 to /8 1/4 9 1/4 1/2 AX1-E3 AX1-EK3 IX1-E3 IX1-EK3 26 to /16 1/4 9 3/8 1/2 AX1-E3 AX1-EK3 IX1-E3 IX1-EK3 30 to /4 1/4 9 1/2 1/2 AX1-E3 AX1-EK3 IX1-E3 IX1-EK3 34 to /16 1/4 9 5/8 1/2 AX1-E3 AX1-EK3 IX1-E3 IX1-EK3 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = (US) (anada) 21

22 Elbows 3 Elbows (E3) continued Used to change direction of the duct or to provide offset. 3 Elbows provide also a slope for horizontal run. omes alone (E3) or in pairs as a kit (EK3). The Elbow Kit (two elbows) can establish many different degrees combined with other elbows. The kit may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One Locking V-Band (BSI), one entering Flue Extension (PR-0794) and one Locking Outer Band (BSE) included. Two-Elbow OFFSET OFFSET 3 RISE 3 Elbows - IX2 (2" Wool Insulated) 3 Elbows - IX3Z (3" Wool Insulated) Rise Two- Elbows One Elbow IX2 Product ode Two Elbows IX2 Rise Two- Elbows One Elbow IX3Z Product ode Two Elbows IX3Z 5 to 7 4 7/16 1/4 8 7/8 1/2 IX2-E3 IX2-EK3 8 to /2 1/4 9 1/2 IX2-E3 IX2-EK3 13 to /16 1/4 9 1/8 1/2 IX2-E3 IX2-EK3 18 to /8 1/4 9 1/4 1/2 IX2-E3 IX2-EK3 24 to /16 1/4 9 3/8 1/2 IX2-E3 IX2-EK3 28 to /4 1/4 9 1/2 1/2 IX2-E3 IX2-EK3 32 to /16 1/4 9 5/8 1/2 IX2-E3 IX2-EK3 3 Elbows - IX4 (4" Wool Insulated) Rise Two- Elbows One Elbow IX4 Product ode Two Elbows IX4 5 to 8 4 1/2 1/4 9 1/2 IX4-E3 IX4-EK3 9 to /16 1/4 9 1/8 1/2 IX4-E3 IX4-EK3 14 to /8 1/4 9 1/4 1/2 IX4-E3 IX4-EK3 20 to /16 1/4 9 3/8 1/2 IX4-E3 IX4-EK3 24 to /4 1/4 9 1/2 1/2 IX4-E3 IX4-EK3 28 to /16 1/4 9 5/8 1/2 IX4-E3 IX4-EK3 34 to /8 1/4 9 3/4 1/2 IX4-E3 IX4-EK /32 7/ /16 7/16 IX3Z-E3 IX3Z-EK3 6 to 7 4 7/16 7/32 8 7/8 7/16 IX3Z-E3 IX3Z-EK /32 7/ /16 7/16 IX3Z-E3 IX3Z-EK3 9 to /2 7/ /32 7/16 IX3Z-E3 IX3Z-EK3 11 to /2 1/4 9 1/2 IX3Z-E3 IX3Z-EK3 13 to /32 1/4 9 1/16 1/2 IX3Z-E3 IX3Z-EK /16 1/4 9 1/8 1/2 IX3Z-E3 IX3Z-EK /32 1/4 9 3/16 1/2 IX3Z-E3 IX3Z-EK /8 1/4 9 7/32 1/2 IX3Z-E3 IX3Z-EK3 22 to /32 1/4 9 9/32 1/2 IX3Z-E3 IX3Z-EK /16 1/4 9 3/8 1/2 IX3Z-E3 IX3Z-EK /32 1/4 9 15/32 1/2 IX3Z-E3 IX3Z-EK /4 1/4 9 1/2 1/2 IX3Z-E3 IX3Z-EK /32 1/4 9 17/32 1/2 IX3Z-E3 IX3Z-EK /16 1/4 9 19/32 1/2 IX3Z-E3 IX3Z-EK /32 1/4 9 21/32 1/2 IX3Z-E3 IX3Z-EK3 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = Security himneys

23 Elbows 15 Elbows (E15) Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2 and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). Two-Elbow OFFSET OFFSET 15 RISE 15 Elbows - SL (Single Wall) 15 Elbows - AX1 (1" Air Insulated) / IX1 (1" Wool Insulated) Rise Two- Elbows Product ode One Elbow SL Rise Two- Elbows One Elbow AX1 Product ode One Elbow IX / /4 2 SL5E /4 1 1/4 9 3/8 2 1/2 AX1-5E15 IX1-5E / /8 2 SL6E /16 1 1/4 9 1/2 2 1/2 AX1-6E15 IX1-6E / /2 2 SL7E /16 1 1/4 9 3/4 2 1/2 AX1-7E15 IX1-7E / /8 2 SL8E /4 9 7/8 2 1/2 AX1-8E15 IX1-8E /8 2 SL9E /16 1 1/ /2 AX1-9E15 IX1-9E / SL10E /8 1 3/8 10 1/8 2 3/4 AX1-10E15 IX1-10E /8 1 1/8 8 1/8 2 1/4 SL11E /16 1 3/8 10 1/4 2 3/4 AX1-11E15 IX1-11E /16 1 1/8 8 1/4 2 1/4 SL12E /4 1 3/8 10 3/8 2 3/4 AX1-12E15 IX1-12E /4 1 1/8 8 3/8 2 1/4 SL13E /16 1 3/8 10 1/2 2 3/4 AX1-13E15 IX1-13E /16 1 1/8 8 1/2 2 1/4 SL14E /8 1 3/8 10 5/8 2 3/4 AX1-14E15 IX1-14E /16 1 1/8 8 3/4 2 1/4 SL16E /2 1 3/8 10 7/8 2 3/4 AX1-16E15 IX1-16E /16 1 1/ /4 SL18E /8 1 1/ AX1-18E15 IX1-18E /16 1 1/4 9 1/4 2 1/2 SL20E /4 1 1/2 11 1/4 3 AX1-20E15 IX1-20E /16 1 1/4 9 1/2 2 1/2 SL22E /8 1 1/2 11 1/2 3 AX1-22E15 IX1-22E /16 1 1/4 9 3/4 2 1/2 SL24E /2 11 3/4 3 AX1-24E15 IX1-24E /16 1 1/ /2 SL26E /16 1 5/8 12 1/8 3 1/4 AX1-26E15 IX1-26E /4 1 3/8 10 3/8 2 3/4 SL28E /16 1 5/8 12 3/8 3 1/4 AX1-28E15 IX1-28E /8 1 3/8 10 5/8 2 3/4 SL30E /16 1 5/8 12 5/8 3 1/4 AX1-30E15 IX1-30E /2 1 3/8 10 7/8 2 3/4 SL32E /16 1 3/4 12 7/8 3 1/2 AX1-32E15 IX1-32E /8 1 1/ SL34E /16 1 3/4 13 1/8 3 1/2 AX1-34E15 IX1-34E /4 1 1/2 11 1/4 3 SL36E /16 1 3/4 13 3/8 3 1/2 AX1-36E15 IX1-36E15 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = (US) (anada) 23

24 Elbows 15 Elbows (E15) continued Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2 and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). Two-Elbow OFFSET OFFSET 15 RISE 15 Elbows - IX2 (2" Wool Insulated) 15 Elbows - IX4 (4" Wool Insulated) Rise Two- Elbows Product ode One Elbow IX2 Rise Two- Elbows Product ode One Elbow IX /16 1 1/4 9 3/4 2 1/2 IX2-5E /16 1 3/8 10 1/4 2 3/4 IX4-5E /4 9 7/8 2 1/2 IX2-6E /4 1 3/8 10 3/8 2 3/4 IX4-6E /16 1 1/ /2 IX2-7E /16 1 3/8 10 1/2 2 3/4 IX4-7E /8 1 3/8 10 1/8 2 3/4 IX2-8E /8 1 3/8 10 5/8 2 3/4 IX4-8E /16 1 3/8 10 1/4 2 3/4 IX2-9E /16 1 3/8 10 3/4 2 3/4 IX4-9E /4 1 3/8 10 3/8 2 3/4 IX2-10E /2 1 3/8 10 7/8 2 3/4 IX4-10E /16 1 3/8 10 1/2 2 3/4 IX2-11E /16 1 1/2 10 7/8 3 IX4-11E /8 1 3/8 10 5/8 2 3/4 IX2-12E /8 1 1/ IX4-12E /16 1 3/8 10 3/4 2 3/4 IX2-13E /16 1 1/2 11 1/8 3 IX4-13E /2 1 3/8 10 7/8 2 3/4 IX2-14E /4 1 1/2 11 1/4 3 IX4-14E /8 1 1/ IX2-16E /8 1 1/2 11 1/2 3 IX4-16E /4 1 1/2 11 1/4 3 IX2-18E /2 11 3/4 3 IX4-18E /8 1 1/2 11 1/2 3 IX2-20E /16 1 5/8 12 1/8 3 1/4 IX4-20E /2 11 3/4 3 IX2-22E /16 1 5/8 12 3/8 3 1/4 IX4-22E /16 1 5/8 12 1/8 3 1/4 IX2-24E /16 1 5/8 12 5/8 3 1/4 IX4-24E /16 1 5/8 12 3/8 3 1/4 IX2-26E /16 1 3/4 12 7/8 3 1/2 IX4-26E /16 1 5/8 12 5/8 3 1/4 IX2-28E /16 1 3/4 13 1/8 3 1/2 IX4-28E /16 1 3/4 12 7/8 3 1/2 IX2-30E /16 1 3/4 13 3/8 3 1/2 IX4-30E /16 1 3/4 13 1/8 3 1/2 IX2-32E /16 1 3/4 13 5/8 3 1/2 IX4-32E /16 1 3/4 13 3/8 3 1/2 IX2-34E /16 1 7/8 13 7/8 3 3/4 IX4-34E /16 1 3/4 13 5/8 3 1/2 IX2-36E /16 1 7/8 14 1/8 3 3/4 IX4-36E15 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = Security himneys

25 Elbows 15 Elbows (E15) continued Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2 and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). Two-Elbow OFFSET OFFSET 15 RISE 15 Elbows - IX3Z (3" Wool Insulated) Rise Two- Elbows Product ode One Elbow IX3Z / /16 2 9/16 IX3Z-5E /32 1 5/ /32 2 5/8 IX3Z-6E /8 1 11/ / /16 IX3Z-7E / / / /16 IX3Z-8E /32 1 3/ /32 2 3/4 IX3Z-9E /32 1 3/8 10 1/2 2 3/4 IX3Z-10E / / /8 2 13/16 IX3Z-11E / / /4 2 13/16 IX3Z-12E /32 1 7/ /8 2 7/8 IX3Z-13E /32 1 7/ /8 IX3Z-14E /32 1 1/4 11 1/4 2 1/2 IX3Z-16E /8 1 17/ /32 3 1/16 IX3Z-18E / /32 3 1/8 IX3Z-20E /8 1 19/ /32 3 3/16 IX3Z-22E /4 1 5/8 12 5/16 3 1/4 IX3Z-24E /8 1 21/ /16 3 5/16 IX3Z-26E /2 1 11/ /16 3 3/8 IX3Z-28E / / /32 3 7/16 IX3Z-30E /32 1 3/ /32 3 1/2 IX3Z-32E / / /32 3 9/16 IX3Z-34E / / / /16 IX3Z-36E15 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = (US) (anada) 25

26 Elbows 30 Elbows (E30) Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR- 0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). Two-Elbow OFFSET OFFSET 30 RISE 30 Elbows - SL (Single Wall) 30 Elbows - AX1 (1" Air Insulated) / IX1 (1" Wool Insulated) Rise Two- Elbows Product ode One Elbow SL Rise Two- Elbows One Elbow AX1 Product ode One Elbow IX / /16 4 SL5E /4 2 5/8 9 3/4 5 1/4 AX1-5E30 IX1-5E /16 2 1/8 7 7/8 4 1/4 SL6E /8 2 3/ /2 AX1-6E30 IX1-6E /16 2 1/ /4 SL7E /2 2 3/4 10 1/4 5 1/2 AX1-7E30 IX1-7E /16 2 1/4 8 1/4 4 1/2 SL8E /16 2 7/8 10 5/8 5 3/4 AX1-8E30 IX1-8E /16 2 1/4 8 1/2 4 1/2 SL9E /16 2 7/8 10 7/8 5 3/4 AX1-9E30 IX1-9E /4 2 3/8 8 7/8 4 3/4 SL10E / /8 6 AX1-10E30 IX1-10E /8 2 1/2 9 1/8 5 SL11E / /8 6 AX1-11E30 IX1-11E /2 9 3/8 5 SL12E /16 3 1/8 11 1/2 6 1/4 AX1-12E30 IX1-12E /8 2 5/8 9 5/8 5 1/4 SL13E /16 3 1/8 11 3/4 6 1/4 AX1-13E30 IX1-13E /4 2 5/8 9 3/4 5 1/4 SL14E /16 3 1/ /2 AX1-14E30 IX1-14E /2 2 3/4 10 1/4 5 1/2 SL16E /4 3 3/8 12 5/8 6 3/4 AX1-16E30 IX1-16E /16 2 7/8 10 7/8 5 3/4 SL18E / AX1-18E30 IX1-18E / /8 6 SL20E /4 3 5/8 13 1/2 7 1/4 AX1-20E30 IX1-20E /16 3 1/8 11 3/4 6 1/4 SL22E /16 3 3/4 14 1/8 7 1/2 AX1-22E30 IX1-22E /8 3 3/8 12 3/8 6 3/4 SL24E /16 3 7/8 14 5/8 7 3/4 AX1-24E30 IX1-24E /8 3 1/2 12 7/8 7 SL26E / AX1-26E30 IX1-26E /8 3 5/8 13 1/4 7 1/4 SL28E /16 4 1/8 15 1/2 8 1/4 AX1-28E30 IX1-28E /8 3 3/4 13 3/4 7 1/2 SL30E /8 4 1/4 16 1/8 8 1/2 AX1-30E30 IX1-30E /16 3 7/8 14 3/8 7 3/4 SL32E /8 4 3/8 16 1/2 8 3/4 AX1-32E30 IX1-32E / /4 8 SL34E /8 4 1/ AX1-34E30 IX1-34E /16 4 1/8 15 1/4 8 1/4 SL36E /16 4 3/4 17 5/8 9 1/2 AX1-36E30 IX1-36E30 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = Security himneys

27 Elbows 30 Elbows (E30) continued Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR- 0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). Two-Elbow OFFSET OFFSET 30 RISE 30 Elbows - IX2 (2" Wool Insulated) 30 Elbows - IX4 (4" Wool Insulated) Rise Two- Elbows Product ode One Elbow IX2 Rise Two- Elbows Product ode One Elbow IX /2 2 3/4 10 1/4 5 1/2 IX2-5E / /8 6 IX4-5E /16 2 7/8 10 5/8 5 3/4 IX2-6E /16 3 1/8 11 1/2 6 1/4 IX4-6E /16 2 7/8 10 7/8 5 3/4 IX2-7E /16 3 1/8 11 3/4 6 1/4 IX4-7E / /8 6 IX2-8E /16 3 1/ /2 IX4-8E / /8 6 IX2-9E /8 3 3/8 12 3/8 6 3/4 IX4-9E /16 3 1/8 11 1/2 6 1/4 IX2-10E /4 3 3/8 12 5/8 6 3/4 IX4-10E /16 3 1/8 11 3/4 6 1/4 IX2-11E /8 3 1/2 12 7/8 7 IX4-11E /16 3 1/ /2 IX2-12E / IX4-12E /8 3 3/8 12 3/8 6 3/4 IX2-13E /8 3 5/8 13 1/4 7 1/4 IX4-13E /4 3 3/8 12 5/8 6 3/4 IX2-14E /4 3 5/8 13 1/2 7 1/4 IX4-14E / IX2-16E /16 3 3/4 14 1/8 7 1/2 IX4-16E /4 3 5/8 13 1/2 7 1/4 IX2-18E /16 3 7/8 14 5/8 7 3/4 IX4-18E /16 3 3/4 14 1/8 7 1/2 IX2-20E / IX4-20E /16 3 7/8 14 5/8 7 3/4 IX2-22E /16 4 1/8 15 1/2 8 1/4 IX4-22E / IX2-24E /8 4 1/4 16 1/8 8 1/2 IX4-24E /16 4 1/8 15 1/2 8 1/4 IX2-26E /8 4 3/8 16 1/2 8 3/4 IX4-26E /8 4 1/4 16 1/8 8 1/2 IX2-28E /8 4 1/ IX4-28E /8 4 3/8 16 1/2 8 3/4 IX2-30E /16 4 3/4 17 5/8 9 1/2 IX4-30E /8 4 1/ IX2-32E /16 4 7/8 18 1/8 9 3/4 IX4-32E /16 4 3/4 17 5/8 9 1/2 IX2-34E / /2 10 IX4-34E /16 4 7/8 18 1/8 9 3/4 IX2-36E /16 5 1/ /4 IX4-36E30 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = (US) (anada) 27

28 Elbows 30 Elbows (E30) continued Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR- 0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). Two-Elbow OFFSET OFFSET 30 RISE 30 Elbows - IX3Z (3" Wool Insulated) Rise Two- Elbows Product ode One Elbow IX3Z 5 5 3/4 2 7/8 10 3/4 5 3/4 IX3Z-5E / / /8 IX3Z-6E / /4 6 IX3Z-7E /32 3 1/ /8 6 1/16 IX3Z-8E /32 3 5/ /8 6 5/16 IX3Z-9E /16 3 7/ /32 6 7/16 IX3Z-10E /16 3 9/ /32 6 9/16 IX3Z-11E / / /2 6 11/16 IX3Z-12E /16 3 7/ /32 6 7/8 IX3Z-13E / / /16 IX3Z-14E /32 3 5/8 13 1/2 7 1/4 IX3Z-16E /2 3 3/ /2 IX3Z-18E /4 3 7/8 14 1/2 7 3/4 IX3Z-20E /32 4 1/ /16 IX3Z-22E /16 4 5/ /2 8 5/16 IX3Z-24E /16 4 9/ /16 IX3Z-26E / / /2 8 13/16 IX3Z-28E /32 4 9/ /8 IX3Z-30E /8 4 11/ /2 9 3/8 IX3Z-32E /8 4 13/ /8 IX3Z-34E / / /32 9 7/8 IX3Z-36E30 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = Security himneys

29 Elbows 45 Elbows (E45) Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR- 0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). Two-Elbow OFFSET OFFSET 45 RISE 45 Elbows - SL (Single Wall) 45 Elbows - AX1 (1 Air Insulated) / IX1 (1" Wool Insulated) Rise Two- Elbows Product ode One Elbow SL Rise Two- Elbows One Elbow AX1 Product ode One Elbow IX /16 3 1/8 7 9/16 6 1/4 SL5E /4 4 1/8 9 7/8 8 1/4 AX1-5E45 IX1-5E /8 3 1/4 7 7/8 6 1/2 SL6E /4 10 1/4 8 1/2 AX1-6E45 IX1-6E /16 3 3/8 8 1/4 6 3/4 SL7E /16 4 3/8 10 5/8 8 3/4 AX1-7E45 IX1-7E /16 3 5/8 8 5/8 7 1/4 SL8E /8 4 1/2 10 7/8 9 AX1-8E45 IX1-8E /4 3 3/ /2 SL9E /8 4 5/8 11 1/4 9 1/4 AX1-9E45 IX1-9E /16 3 7/8 9 1/4 7 3/4 SL10E /16 4 7/8 11 5/8 9 3/4 AX1-10E45 IX1-10E / /4 8 SL11E AX1-11E45 IX1-11E /8 4 1/ /4 SL12E /4 5 1/8 12 3/8 10 1/4 AX1-12E45 IX1-12E /16 4 1/4 10 3/8 8 1/2 SL13E /16 5 1/4 12 3/4 10 1/2 AX1-13E45 IX1-13E /16 4 1/2 10 3/4 9 SL14E /8 5 3/ /4 AX1-14E45 IX1-14E /16 4 3/4 11 3/8 9 1/2 SL16E /16 5 3/4 13 3/4 11 1/2 AX1-16E45 IX1-16E / /8 10 SL18E / /8 12 AX1-18E45 IX1-18E /16 5 3/8 12 7/8 10 3/4 SL20E /8 6 1/4 15 1/8 12 1/2 AX1-20E45 IX1-20E /16 5 5/8 13 1/2 11 1/4 SL22E /16 6 5/8 15 7/8 13 1/4 AX1-22E45 IX1-22E /8 5 7/8 14 1/4 11 3/4 SL24E /16 6 7/8 16 1/2 13 3/4 AX1-24E45 IX1-24E /4 6 1/8 14 7/8 12 1/4 SL26E /8 7 1/8 17 1/4 14 1/4 AX1-26E45 IX1-26E /16 6 1/2 15 5/8 13 SL28E /16 7 1/ AX1-28E45 IX1-28E /8 6 3/4 16 3/8 13 1/2 SL30E /16 7 3/4 18 5/8 15 1/2 AX1-30E45 IX1-30E /8 17 1/8 14 1/4 SL32E / /8 16 AX1-32E45 IX1-32E /16 7 3/8 17 7/8 14 3/4 SL34E /4 8 1/ /2 AX1-34E45 IX1-34E /8 7 3/4 18 5/8 15 1/2 SL36E /16 8 5/8 20 3/4 17 1/4 AX1-36E45 IX1-36E45 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = (US) (anada) 29

30 Elbows 45 Elbows (E45) continued Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR- 0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). 45 Two-Elbow OFFSET OFFSET RISE 45 Elbows - IX2 (2" Wool Insulated) 45 Elbows - IX4 (4" Wool Insulated) Rise Two- Elbows Product ode One Elbow IX2 Rise Two- Elbows Product ode One Elbow IX /16 4 3/8 10 5/8 8 3/4 IX2-5E IX4-5E /8 4 1/2 10 7/8 9 IX2-6E /4 5 1/8 12 3/8 10 1/4 IX4-6E /8 4 5/8 11 1/4 9 1/4 IX2-7E /16 5 1/4 12 3/4 10 1/2 IX4-7E /16 4 7/8 11 5/8 9 3/4 IX2-8E /8 5 3/ /4 IX4-8E IX2-9E /16 5 1/2 13 3/8 11 IX4-9E /4 5 1/8 12 3/8 10 1/4 IX2-10E /16 5 3/4 13 3/4 11 1/2 IX4-10E /16 5 1/4 12 3/4 10 1/2 IX2-11E /4 5 7/8 14 1/8 11 3/4 IX4-11E /8 5 3/ /4 IX2-12E / /8 12 IX4-12E /16 5 1/2 13 3/8 11 IX2-13E /16 6 1/8 14 7/8 12 1/4 IX4-13E /16 5 3/4 13 3/4 11 1/2 IX2-14E /8 6 1/4 15 1/8 12 1/2 IX4-14E / /8 12 IX2-16E /16 6 5/8 15 7/8 13 1/4 IX4-16E /8 6 1/4 15 1/8 12 1/2 IX2-18E /16 6 7/8 16 1/2 13 3/4 IX4-18E /16 6 5/8 15 7/8 13 1/4 IX2-20E /8 7 1/8 17 1/4 14 1/4 IX4-20E /16 6 7/8 16 1/2 13 3/4 IX2-22E /16 7 1/ IX4-22E /8 7 1/8 17 1/4 14 1/4 IX2-24E /16 7 3/4 18 5/8 15 1/2 IX4-24E /16 7 1/ IX2-26E / /8 16 IX4-26E /16 7 3/4 18 5/8 15 1/2 IX2-28E /4 8 1/ /2 IX4-28E / /8 16 IX2-30E /16 8 5/8 20 3/4 17 1/4 IX4-30E /4 8 1/ /2 IX2-32E /8 8 7/8 21 1/2 17 3/4 IX4-32E /16 8 5/8 20 3/4 17 1/4 IX2-34E /4 22 1/4 18 1/2 IX4-34E /8 8 7/8 21 1/2 17 3/4 IX2-36E /16 9 1/ IX4-36E45 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = Security himneys

31 Elbows 45 Elbows (E45) continued Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR- 0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). 45 Two-Elbow OFFSET OFFSET RISE 45 Elbows - IX3Z (3" Wool Insulated) Rise Two- Elbows Product ode One Elbow IX3Z 5 6 9/ / /32 9 5/16 IX3Z-5E / / /16 9 9/16 IX3Z-6E / / /32 9 7/8 IX3Z-7E /16 5 3/ / /16 IX3Z-8E /32 5 7/ /8 10 7/16 IX3Z-9E /32 5 3/ / /4 IX3Z-10E / / / /16 IX3Z-11E / / / /16 IX3Z-12E / / / /8 IX3Z-13E / / / /16 IX3Z-14E /32 6 1/4 15 3/ /2 IX3Z-16E /4 6 9/ / /8 IX3Z-18E / / / /16 IX3Z-20E /32 7 1/8 17 7/ /4 IX3Z-22E /2 7 7/ / /8 IX3Z-24E / / / /16 IX3Z-26E / /32 16 IX3Z-28E /4 8 5/ / /8 IX3Z-30E / / /4 17 3/16 IX3Z-32E /16 8 7/ / /4 IX3Z-34E / / /8 IX3Z-36E45 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = (US) (anada) 31

32 Elbows 90 Elbows (E90) Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR- 0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). Two-Elbow OFFSET OFFSET 90 E RISE E 90 Elbows - SL (Single Wall) 90 Elbows - AX1 (1" Air Insulated) / IX1 (1" Wool Insulated) Rise Two- Elbows Product ode One Elbow SL E Rise Two- Elbows One Elbow AX1 Product ode One Elbow IX /16 3 1/16 6 5/8 6 5/8 13 1/4 SL5E /4 4 15/16 9 1/4 9 1/4 18 1/2 AX1-5E90 IX1-5E /8 3 9/16 7 1/8 7 1/8 14 1/4 SL6E /16 9 3/4 9 3/4 19 1/2 AX1-6E90 IX1-6E / /8 7 5/8 15 1/4 SL7E /16 5 3/4 10 1/4 10 1/4 20 1/2 AX1-7E90 IX1-7E /16 4 5/16 8 1/8 8 1/8 16 1/4 SL8E /8 6 3/ /4 10 3/4 21 1/2 AX1-8E90 IX1-8E /4 4 3/4 8 5/8 8 5/8 17 1/4 SL9E /8 6 9/ /4 11 1/4 22 1/2 AX1-9E90 IX1-9E /16 5 3/16 9 1/8 9 1/8 18 1/4 SL10E / /4 11 3/4 23 1/2 AX1-10E90 IX1-10E /16 5 9/16 9 5/8 9 5/8 19 1/4 SL11E / /4 12 1/4 24 1/2 AX1-11E90 IX1-11E / /8 10 1/8 20 1/4 SL12E /4 7 3/4 12 3/4 12 3/4 25 1/2 AX1-12E90 IX1-12E /16 6 7/ /8 10 5/8 21 1/4 SL13E /16 8 1/4 13 1/4 13 1/4 26 1/2 AX1-13E90 IX1-13E / / /8 11 1/8 22 1/4 SL14E /8 8 11/ /4 13 3/4 27 1/2 AX1-14E90 IX1-14E / / /8 12 1/8 24 1/4 SL16E /16 9 7/ /4 14 3/4 29 1/2 AX1-16E90 IX1-16E /8 8 1/2 13 1/8 13 1/8 26 1/4 SL18E / / /4 15 3/4 31 1/2 AX1-18E90 IX1-18E /16 9 1/4 14 1/8 14 1/8 28 1/4 SL20E /8 11 1/8 16 3/4 16 3/4 33 1/2 AX1-20E90 IX1-20E / / /8 15 1/8 30 1/4 SL22E / / /4 17 3/4 35 1/2 AX1-22E90 IX1-22E / / /8 16 1/8 32 1/4 SL24E / / /4 18 3/4 37 1/2 AX1-24E90 IX1-24E /4 11 7/8 17 1/8 17 1/8 34 1/4 SL26E /8 13 5/8 19 3/4 19 3/4 39 1/2 AX1-26E90 IX1-26E / /8 18 1/8 18 1/8 36 1/4 SL28E / / /4 20 3/4 41 1/2 AX1-28E90 IX1-28E /8 13 7/ /8 19 1/8 38 1/4 SL30E / / /4 21 3/4 43 1/2 AX1-30E90 IX1-30E / /8 20 1/8 40 1/4 SL32E /8 16 1/ /4 22 3/4 45 1/2 AX1-32E90 IX1-32E / /8 21 1/8 21 1/8 42 1/4 SL34E / /4 23 3/4 47 1/2 AX1-34E90 IX1-34E / / /8 22 1/8 44 1/4 SL36E / /4 24 3/4 24 3/4 49 1/2 AX1-36E90 IX1-36E90 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = Security himneys

33 Elbows 90 Elbows (E90) continued Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR- 0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). Two-Elbow OFFSET OFFSET 90 E RISE 90 Elbows - IX2 (2" Wool Insulated) 90 Elbows - IX4 (4" Wool Insulated) E Rise Two- Elbows Product ode One Elbow IX2 E Rise Two- Elbows Product ode One Elbow IX /16 5 3/4 10 1/4 10 1/4 20 1/2 IX2-5E / /4 12 1/4 24 1/2 IX4-5E /8 6 3/ /4 10 3/4 21 1/2 IX2-6E /4 7 3/4 12 3/4 12 3/4 25 1/2 IX4-6E /8 6 9/ /4 11 1/4 22 1/2 IX2-7E /16 8 1/4 13 1/4 13 1/4 26 1/2 IX4-7E / /4 11 3/4 23 1/2 IX2-8E /8 8 11/ /4 13 3/4 27 1/2 IX4-8E / /4 12 1/4 24 1/2 IX2-9E /16 9 1/8 14 1/4 14 1/4 28 1/2 IX4-9E /4 7 3/4 12 3/4 12 3/4 25 1/2 IX2-10E /16 9 7/ /4 14 3/4 29 1/2 IX4-10E /16 8 1/4 13 1/4 13 1/4 26 1/2 IX2-11E /4 9 7/8 15 1/4 15 1/4 30 1/2 IX4-11E /8 8 11/ /4 13 3/4 27 1/2 IX2-12E / / /4 15 3/4 31 1/2 IX4-12E /16 9 1/8 14 1/4 14 1/4 28 1/2 IX2-13E / / /4 16 1/4 32 1/2 IX4-13E /16 9 7/ /4 14 3/4 29 1/2 IX2-14E /8 11 1/8 16 3/4 16 3/4 33 1/2 IX4-14E / / /4 15 3/4 31 1/2 IX2-16E / / /4 17 3/4 35 1/2 IX4-16E /8 11 1/8 16 3/4 16 3/4 33 1/2 IX2-18E / / /4 18 3/4 37 1/2 IX4-18E / / /4 17 3/4 35 1/2 IX2-20E /8 13 5/8 19 3/4 19 3/4 39 1/2 IX4-20E / / /4 18 3/4 37 1/2 IX2-22E / / /4 20 3/4 41 1/2 IX4-22E /8 13 5/8 19 3/4 19 3/4 39 1/2 IX2-24E / / /4 21 3/4 43 1/2 IX4-24E / / /4 20 3/4 41 1/2 IX2-26E /8 16 1/ /4 22 3/4 45 1/2 IX4-26E / / /4 21 3/4 43 1/2 IX2-28E / /4 23 3/4 47 1/2 IX4-28E /8 16 1/ /4 22 3/4 45 1/2 IX2-30E / /4 24 3/4 24 3/4 49 1/2 IX4-30E / /4 23 3/4 47 1/2 IX2-32E /8 18 9/ /4 25 3/4 51 1/2 IX4-32E / /4 24 3/4 24 3/4 49 1/2 IX2-34E / /4 26 3/4 53 1/2 IX4-34E /8 18 9/ /4 25 3/4 51 1/2 IX2-36E / /4 27 3/4 27 3/4 55 1/2 IX4-36E90 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = (US) (anada) 33

34 Elbows 90 Elbows (E90) continued Used to change direction of the duct or to provide offset. Two elbows can establish many different degrees combined with other elbows and may also establish many different offset when combined with standard different lengths. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). Two-Elbow OFFSET OFFSET 90 E RISE 90 Elbows - IX3Z (3" Wool Insulated) E Rise Two- Elbows Product ode One Elbow IX3Z 5 6 9/16 6 9/ / / /16 IX3Z-5E / / / /16 IX3Z-6E / / / / /16 IX3Z-7E / / / / /16 IX3Z-8E /32 8 7/ / / /16 IX3Z-9E / / / / /16 IX3Z-10E /16 9 1/ / / /16 IX3Z-11E / / / / /16 IX3Z-12E /32 9 7/8 15 7/ / /16 IX3Z-13E / / / / /16 IX3Z-14E / / / / /16 IX3Z-16E / / / / /16 IX3Z-18E / / / / /16 IX3Z-20E / / / / /16 IX3Z-22E /2 14 7/ / / /16 IX3Z-24E / / / / /16 IX3Z-26E / / / / /16 IX3Z-28E / / / / /16 IX3Z-30E / / / / /16 IX3Z-32E / / / / /16 IX3Z-34E / / / /16 IX3Z-36E90 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = Security himneys

35 Tees 90 Tees (T90) Used to change direction at 90 breeching. an be used as an inspection access in horizonal or vertical runs as well as drain. A For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). 2 x A A TAP I.D. SL (Single Wall) AX1 (1" Air Insulated) / IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) A Product ode A Product ode A Product ode A Product ode 5 6 1/16 SL5T90 7 1/8 AX1-5T90 IX1-5T90 8 7/8 IX2-5T /8 IX4-5T /16 SL6T90 7 5/8 AX1-6T90 IX1-6T90 9 3/8 IX2-6T /8 IX4-6T /16 SL7T90 8 1/8 AX1-7T90 IX1-7T90 9 7/8 IX2-7T /8 IX4-7T /16 SL8T90 8 5/8 AX1-8T90 IX1-8T /8 IX2-8T /8 IX4-8T /16 SL9T90 9 1/8 AX1-9T90 IX1-9T /8 IX2-9T /8 IX4-9T /16 SL10T90 9 5/8 AX1-10T90 IX1-10T /8 IX2-10T /8 IX4-10T /16 SL11T /8 AX1-11T90 IX1-11T /8 IX2-11T /8 IX4-11T /16 SL12T /8 AX1-12T90 IX1-12T /8 IX2-12T /8 IX4-12T /16 SL13T /8 AX1-13T90 IX1-13T /8 IX2-13T /8 IX4-13T /16 SL14T /8 AX1-14T90 IX1-14T /8 IX2-14T /8 IX4-14T /16 SL16T /8 AX1-16T90 IX1-16T /8 IX2-16T /8 IX4-16T /16 SL18T /8 AX1-18T90 IX1-18T /8 IX2-18T /8 IX4-18T /16 SL20T /8 AX1-20T90 IX1-20T /8 IX2-20T /8 IX4-20T /16 SL22T /8 AX1-22T90 IX1-22T /8 IX2-22T /8 IX4-22T /16 SL24T /8 AX1-24T90 IX1-24T /8 IX2-24T /8 IX4-24T /16 SL26T /8 AX1-26T90 IX1-26T /8 IX2-26T /8 IX4-26T /16 SL28T /8 AX1-28T90 IX1-28T /8 IX2-28T /8 IX4-28T /16 SL30T /8 AX1-30T90 IX1-30T /8 IX2-30T /8 IX4-30T /16 SL32T /8 AX1-32T90 IX1-32T /8 IX2-32T /8 IX4-32T /16 SL34T /8 AX1-34T90 IX1-34T /8 IX2-34T /8 IX4-34T /16 SL36T /8 AX1-36T90 IX1-36T /8 IX2-36T /8 IX4-36T90 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = 1.25 Also available with Smaller TAP diameter (tap). ode for Smaller Tap: SLT90B(tap), AX1-T90B(tap), IX1-T90B(tap), IX2-T90B(tap), IX4-T90B(tap). ode example for Smaller Tap: a IX1 90 degrees Tee of 12 with a tap of 10 = IX1-12T90B10. Also available with Smaller TAP (TAP) and Smaller Height. ode for Smaller TAP & Smaller Height: SLT90B(tap)H(tap), AX1-T90B(tap)H(tap), IX1-T90B(tap)H(tap), IX2-T90B(tap) H(tap), IX4-T90B(tap)H(tap). ode example for smaller Tap and smaller Height: a IX1 90 degrees Tee of 12 with a tap of 10 and the Height of a regular T90 of 10 = IX1-12T90B10H (US) (anada) 35

36 Tees 45 Tees (T45) Used to change direction at 45 breeching a low resistance flow. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX 1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). A B 45 B TAP SL (Single Wall) AX1 (1" Air Insulated) / IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) A B Product ode A B Product ode A B Product ode A B Product ode / /8 SL5T / /16 AX1-5T45 IX1-5T / /4 IX2-5T / /16 IX4-5T / /16 SL6T /16 AX1-6T45 IX1-6T /8 16 7/16 IX2-6T /2 21 5/16 IX4-6T /16 SL7T / /4 AX1-7T45 IX1-7T / /16 IX2-7T / /2 IX4-7T / /4 SL8T /8 16 7/16 AX1-8T45 IX1-8T / /8 IX2-8T / /16 IX4-8T / /16 SL9T / /16 AX1-9T45 IX1-9T / /16 IX2-9T / /16 IX4-9T / /16 SL10T / /8 AX1-10T45 IX1-10T /2 21 5/16 IX2-10T / /8 IX4-10T / /8 SL11T / /16 AX1-11T45 IX1-11T / /2 IX2-11T / /16 IX4-11T / /16 SL12T /2 21 5/16 AX1-12T45 IX1-12T / /16 IX2-12T /2 IX4-12T /2 20 5/16 SL13T / /2 AX1-13T45 IX1-13T / /16 IX2-13T / /4 IX4-13T / /2 SL14T / /16 AX1-14T45 IX1-14T / /8 IX2-14T / /16 IX4-14T / /16 SL16T / /8 AX1-16T45 IX1-16T /2 IX2-16T /8 34 3/8 IX4-16T / /16 SL18T /2 AX1-18T45 IX1-18T / /16 IX2-18T /2 36 3/4 IX4-18T /8 28 3/4 SL20T / /16 AX1-20T45 IX1-20T /8 34 3/8 IX2-20T / /16 IX4-20T /4 31 3/16 SL22T /8 34 3/8 AX1-22T45 IX1-22T /2 36 3/4 IX2-22T /8 41 5/8 IX4-22T / /16 SL24T /2 36 3/4 AX1-24T45 IX1-24T / /16 IX2-24T /16 46 IX4-24T /8 36 SL26T / /16 AX1-26T45 IX1-26T /8 41 5/8 IX2-26T / /16 IX4-26T / /8 SL28T /8 41 5/8 AX1-28T45 IX1-28T /16 46 IX2-28T / /16 IX4-28T / /16 SL30T /16 46 AX1-30T45 IX1-30T / /16 IX2-30T / /4 IX4-30T /8 43 1/4 SL32T / /16 AX1-32T45 IX1-32T / /16 IX2-32T / /16 IX4-32T / /8 SL34T / /16 AX1-34T45 IX1-34T / /4 IX2-34T /8 58 1/16 IX4-34T /16 SL36T / /4 AX1-36T45 IX1-36T / /16 IX2-36T / /2 IX4-36T45 Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = 0.40 Also available with Smaller TAP diameter (tap). ode for Smaller Tap: SLT45B(tap), AX1- T45B(tap), IX1-T45B(tap), IX2-T45B(tap), IX4-T45B(tap). ode example for Smaller Tap: a IX1 45-degrees Tee of 12 with a tap of 10 = IX1-12T45B10 Also available with Smaller TAP (TAP) and Smaller Height. ode for Smaller TAP & Smaller Height: SLT45B(tap) H(tap), AX1-T45B(tap)H(tap), IX1-T45B(tap) H(tap), IX2-T45B(tap)H(tap), IX4-T45B(tap) H(tap). A B Product ode IX3Z (3" Wool Insulated) A B Product ode / /32 IX3Z-5T / /32 IX3Z-18T / /32 IX3Z-6T / /4 IX3Z-20T / /16 IX3Z-7T / /32 IX3Z-22T /2 21 9/32 IX3Z-8T / /32 IX3Z-24T / /32 IX3Z-9T /16 46 IX3Z-26T / /16 IX3Z-10T / /32 IX3Z-28T /4 24 7/8 IX3Z-11T / /16 IX3Z-30T / /32 IX3Z-12T / /4 IX3Z-32T / /16 IX3Z-13T / /32 IX3Z-34T / /2 IX3Z-14T / /16 IX3Z-36T / /16 IX3Z-16T45 ode example for smaller Tap and smaller Height: a IX1 45-degrees Tee of 12 with a tap of 10 and the Height of a regular T45 of 10 = IX1-12T45B10H10 36 Security himneys

37 Tees Double 45 Tees (TD45) Used to centrally connect to appliance manifolds to a common chimney. The diameter of the taps (TAPS) must be smaller then the diameter of the body (BODY). For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). A 45 B B TAP of the Taps available A SL (Single Wall) B Product ode AX1 (1" Air Insulated) / IX1 (1" Wool Insulated) 5 N/A N/A N/A N/A N/A N/A N/A N/A / /16 SL6TD /16 AX1-6TD45 IX1-6TD to /16 SL7TD / /4 AX1-7TD45 IX1-7TD to / /4 SL8TD /8 16 7/16 AX1-8TD45 IX1-8TD to / /16 SL9TD / /16 AX1-9TD45 IX1-9TD to / /16 SL10TD / /8 AX1-10TD45 IX1-10TD to / /8 SL11TD / /16 AX1-11TD45 IX1-11TD to / /16 SL12TD /2 21 5/16 AX1-12TD45 IX1-12TD to /2 20 5/16 SL13TD / /2 AX1-13TD45 IX1-13TD to / /2 SL14TD / /16 AX1-14TD45 IX1-14TD to / /16 SL16TD / /8 AX1-16TD45 IX1-16TD to / /16 SL18TD /2 AX1-18TD45 IX1-18TD to /8 28 3/4 SL20TD / /16 AX1-20TD45 IX1-20TD to /4 31 3/16 SL22TD /8 34 3/8 AX1-22TD45 IX1-22TD to / /16 SL24TD /2 36 3/4 AX1-24TD45 IX1-24TD to /8 36 SL26TD / /16 AX1-26TD45 IX1-26TD to / /8 SL28TD /8 41 5/8 AX1-28TD45 IX1-28TD to / /16 SL30TD /16 46 AX1-30TD45 IX1-30TD to /8 43 1/4 SL32TD / /16 AX1-32TD45 IX1-32TD to / /8 SL34TD / /16 AX1-34TD45 IX1-34TD to /16 SL36TD / /4 AX1-36TD45 IX1-36TD45 A B Product ode Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = 0.40 Also available with Smaller TAPS diameter (tap). ode for Smaller Tap: SLT45B(tap), AX1-T45B(tap), IX1-T45B(tap), IX2-T45B(tap), IX4-T45B(tap). ode example for Smaller Taps: a IX1 double 45-degrees Tee of 12 with a tap of 10 = IX1-12TD45B10. Also available with Smaller TAPS (TAPS) and Smaller Height. ode for Smaller TAPS & Smaller Height: SLTD45B(tap) H(tap), AX1-TD45B(tap)H(tap), IX1-TD45B(tap) H(tap), IX2-TD45B(tap)H(tap), IX4-TD45B(tap) H(tap). ode example for smaller Taps and smaller Height: a IX1 double 45-degrees Tee of 12 with both taps of 10 and the Height of a regular TD45 of 10 = IX1-12TD45B10H10. of the Taps available A B Product ode IX3Z (3" Wool Insulated) of the Taps available A B Product ode 5 N/A 24 1/ /32 IX3Z-5TD to / /32 IX3Z-18TD / /32 IX3Z-6TD to / /4 IX3Z-20TD to / /16 IX3Z-7TD to / /32 IX3Z-22TD to /2 21 9/32 IX3Z-8TD to / /32 IX3Z-24TD to / /32 IX3Z-9TD to /16 46 IX3Z-26TD to / /16 IX3Z-10TD to / /32 IX3Z-28TD to /4 24 7/8 IX3Z-11TD to / /16 IX3Z-30TD to / /32 IX3Z-12TD to / /4 IX3Z-32TD to / /16 IX3Z-13TD to / /32 IX3Z-34TD to / /2 IX3Z-14TD to / /16 IX3Z-36TD to / /16 IX3Z-16TD (US) (anada) 37

38 Tees Double 45 Tees (TD45) continued Used to centrally connect to appliance manifolds to a common chimney. The diameter of the taps (TAPS) must be smaller then the diameter of the body (BODY). For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). A 45 B B TAP of the Taps available A IX2 (2" Wool Insulated) B Product ode A IX4 (4" Wool Insulated) 5 N/A N/A N/A N/A N/A N/A N/A /8 16 7/16 IX2-6TD /2 21 5/16 IX4-6TD to / /16 IX2-7TD / /2 IX4-7TD to / /8 IX2-8TD / /16 IX4-8TD to / /16 IX2-9TD / /16 IX4-9TD to /2 21 5/16 IX2-10TD / /8 IX4-10TD to / /2 IX2-11TD / /16 IX4-11TD to / /16 IX2-12TD /2 IX4-12TD to / /16 IX2-13TD / /4 IX4-13TD to / /8 IX2-14TD / /16 IX4-14TD to /2 IX2-16TD /8 34 3/8 IX4-16TD to / /16 IX2-18TD /2 36 3/4 IX4-18TD to /8 34 3/8 IX2-20TD / /16 IX4-20TD to /2 36 3/4 IX2-22TD /8 41 5/8 IX4-22TD to / /16 IX2-24TD /16 46 IX4-24TD to /8 41 5/8 IX2-26TD / /16 IX4-26TD to /16 46 IX2-28TD / /16 IX4-28TD to / /16 IX2-30TD / /4 IX4-30TD to / /16 IX2-32TD / /16 IX4-32TD to / /4 IX2-34TD /8 58 1/16 IX4-34TD to / /16 IX2-36TD / /2 IX4-36TD45 B Product ode Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = 0.40 Also available with Smaller TAPS diameter (tap). ode for Smaller Tap: SLT45B(tap), AX1-T45B(tap), IX1-T45B(tap), IX2-T45B(tap), IX4- T45B(tap). ode example for Smaller Taps: a IX1 double 45-degrees Tee of 12 with a tap of 10 = IX1-12TD45B10. Also available with Smaller TAPS (TAPS) and Smaller Height. ode for Smaller TAPS & Smaller Height: SLTD45B(tap)H(tap), AX1-TD45B(tap)H(tap), IX1- TD45B(tap)H(tap), IX2-TD45B(tap)H(tap), IX4-TD45B(tap)H(tap). ode example for smaller Taps and smaller Height: a IX1 double 45-degrees Tee of 12 with both taps of 10 and the Height of a regular TD45 of 10 = IX1-12TD45B10H Security himneys

39 Tees Y-Tees (TY) Used to provide low-pressure drop for joining two appliances. an be used as a single clean out toward each 90 direction change. Offers same diameter on all branches, but available with smaller snout. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR- 0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). A 90 B TAP I.D. A SL (Single Wall) B Product ode A AX1 (1" Air Insulated) / IX1 (1" Wool Insulated) 5 5 9/16 7 1/16 SL5TY 5 13/16 7 7/8 AX1-5TY IX1-5TY 6 5 3/4 7 9/16 SL6TY 6 8 3/8 AX1-6TY IX1-6TY /16 SL7TY 6 3/16 8 7/8 AX1-7TY IX1-7TY 8 6 3/16 8 9/16 SL8TY 6 7/16 9 3/8 AX1-8TY IX1-8TY 9 6 3/8 9 1/16 SL9TY 6 5/8 9 7/8 AX1-9TY IX1-9TY /8 9 9/16 SL10TY 6 13/ /8 AX1-10TY IX1-10TY / /16 SL11TY /8 AX1-11TY IX1-11TY /16 SL12TY 7 1/4 11 3/8 AX1-12TY IX1-12TY /4 11 1/16 SL13TY 7 7/ /8 AX1-13TY IX1-13TY / /16 SL14TY 7 5/8 12 3/8 AX1-14TY IX1-14TY /8 12 9/16 SL16TY 8 1/ /8 AX1-16TY IX1-16TY /4 13 9/16 SL18TY 9 1/2 15 3/8 AX1-18TY IX1-18TY / /16 SL20TY 9 7/8 16 3/8 AX1-20TY IX1-20TY / /16 SL22TY 10 5/ /8 AX1-22TY IX1-22TY /2 16 9/16 SL24TY 10 3/4 18 3/8 AX1-24TY IX1-24TY / /16 SL26TY 11 1/8 19 3/8 AX1-26TY IX1-26TY / /16 SL28TY 11 9/ /8 AX1-28TY IX1-28TY /4 19 9/16 SL30TY 13 15/ /8 AX1-30TY IX1-30TY / /16 SL32TY 14 3/8 24 3/8 AX1-32TY IX1-32TY / /16 SL34TY 14 13/ /8 AX1-34TY IX1-34TY /16 SL36TY 15 3/ /8 AX1-36TY IX1-36TY B Product ode Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = 0.60 Also available with Smaller TAP diameter (tap). ode for Smaller Tap : SLTYB(tap), AX1-TYB(tap), IX1-TYB(tap), IX2-TYB(tap), IX4-TYB(tap) ode example for Smaller Tap: a IX1 90 degrees Tee of 12 with a tap of 10 = AX1-12T90B (US) (anada) 39

40 Tees Y-Tees (TY) continued Used to provide low-pressure drop for joining two appliances. an be used as a single clean out toward each 90 direction change. Offers same diameter on all branches, but available with smaller snout. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR- 0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). A 90 B TAP I.D. A IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) B Product ode A 5 6 3/16 8 7/8 IX2-5TY /8 IX4-5TY 6 19/ /32 IX3Z-5TY 6 6 7/16 9 3/8 IX2-6TY 7 1/4 11 3/8 IX4-6TY 6 13/ /32 IX3Z-6TY 7 6 5/8 9 7/8 IX2-7TY 7 7/ /8 IX4-7TY 7 1/ /32 IX3Z-7TY / /8 IX2-8TY 7 5/8 12 3/8 IX4-8TY 7 7/ /32 IX3Z-8TY /8 IX2-9TY 7 7/8 12 7/8 IX4-9TY 7 7/ /32 IX3Z-9TY /4 11 3/8 IX2-10TY 8 1/ /8 IX4-10TY 7 5/ /32 IX3Z-10TY / /8 IX2-11TY 8 1/4 13 7/8 IX4-11TY 7 27/ /32 IX3Z-11TY /8 12 3/8 IX2-12TY 9 1/2 15 3/8 IX4-12TY 8 1/ /32 IX3Z-12TY /8 12 7/8 IX2-13TY 9 11/ /8 IX4-13TY 8 1/ /32 IX3Z-13TY / /8 IX2-14TY 9 7/8 16 3/8 IX4-14TY 9 15/ /32 IX3Z-14TY /2 15 3/8 IX2-16TY 10 5/ /8 IX4-16TY 9 7/ /32 IX3Z-16TY /8 16 3/8 IX2-18TY 10 3/4 18 3/8 IX4-18TY 10 9/ /32 IX3Z-18TY / /8 IX2-20TY 11 1/8 19 3/8 IX4-20TY 10 23/ /32 IX3Z-20TY /4 18 3/8 IX2-22TY 11 9/ /8 IX4-22TY 10 15/ /32 IX3Z-22TY /8 19 3/8 IX2-24TY 13 15/ /8 IX4-24TY 11 17/ /32 IX3Z-24TY / /8 IX2-26TY 14 3/8 24 3/8 IX4-26TY 13 15/ /32 IX3Z-26TY / /8 IX2-28TY 14 13/ /8 IX4-28TY 14 3/ /32 IX3Z-28TY /8 24 3/8 IX2-30TY 15 3/ /8 IX4-30TY 14 25/ /32 IX3Z-30TY / /8 IX2-32TY 15 5/8 27 3/8 IX4-32TY 15 3/ /32 IX3Z-32TY / /8 IX2-34TY 16 1/ /8 IX4-34TY 15 19/ /32 IX3Z-34TY /8 27 3/8 IX2-36TY 16 7/ /8 IX4-36TY 16 1/ /32 IX3Z-36TY B Product ode A B Product ode Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = 0.60 Also available with Smaller TAP diameter (tap). ode for Smaller Tap : SLTYB(tap), AX1-TYB(tap), IX1-TYB(tap), IX2-TYB(tap), IX4-TYB(tap) ode example for Smaller Tap: a IX1 90 degrees Tee of 12 with a tap of 10 = AX1-12T90B10 40 Security himneys

41 Tees Lateral Tees (BT) Used to change direction at 90 at lower resistance flow. NOTE: LATERAL TEE (BT) ONLY AVAILABLE UP TO 24. FOR SIZES 26-36, USE A OMBINATION OF 45O TEE (T45) AND 45O ELBOW (E45). For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR- 0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). A B TAP E SL (Single Wall) AX1 (1" Air Insulated) / IX1 (1" Wool Insulated) I.D. A B E Product ode A B E Product ode / /8 12 5/16 3 7/8 SL5BT 18 5/ / /16 6 3/8 AX1-5BT IX1-5BT / / /4 4 5/16 SL6BT / /8 6 15/16 AX1-6BT IX1-6BT / /16 4 7/8 SL7BT 21 7/ / /16 AX1-7BT IX1-7BT / /4 15 1/16 5 3/8 SL8BT 22 7/8 16 7/ / /16 AX1-8BT IX1-8BT / / /8 SL9BT 24 1/ / /16 8 7/16 AX1-9BT IX1-9BT / / /8 6 3/8 SL10BT 25 11/ /8 16 3/4 8 15/16 AX1-10BT IX1-10BT / / /16 6 7/8 SL11BT 27 1/ / /16 9 7/16 AX1-11BT IX1-11BT / / /4 7 3/8 SL12BT 28 1/2 21 1/4 18 9/16 9 7/8 AX1-12BT IX1-12BT /2 20 5/ /8 7 7/8 SL13BT 29 15/ /2 19 1/2 10 7/16 AX1-13BT IX1-13BT / /2 20 9/16 8 3/8 SL14BT 31 5/ / / /16 AX1-14BT IX1-14BT / / /8 9 3/8 SL16BT 34 3/ /8 22 1/ /16 AX1-16BT IX1-16BT / / / /8 SL18BT /2 25 3/4 13 3/16 AX1-18BT IX1-18BT /8 28 3/4 26 1/ /8 SL20BT 41 13/ / /8 14 3/16 AX1-20BT IX1-20BT /4 31 3/ /8 12 3/8 SL22BT 44 5/8 34 3/8 29 7/ /4 AX1-22BT IX1-22BT / / / /8 SL24BT 47 1/2 36 3/4 31 1/4 16 3/16 AX1-24BT IX1-24BT Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = 0.55 Also available with Smaller TAP diameter (tap). ode for Smaller Tap : SLBTB(tap), AX1-BTB(tap), IX1-BTB(tap), IX2-BTB(tap), IX4-BTB(tap). ode example for Smaller Tap: a IX1 Lateral Tee of 12 with a tap of 10 = AX1-12BTB10. Also available with Smaller TAPS (TAPS) and Smaller Height. ode for Smaller TAPS & Smaller Height: SLBTB(tap)H(tap), AX1-BTB(tap)H(tap), IX1-BTB(tap)H(tap), IX2-BT- B(tap)H(tap), IX4-BTB(tap)H(tap). ode example for smaller Taps and smaller Height: a IX1 Lateral Tee of 12 with a tap of 10 and the Height of a regular BT of 10 = AX1-12BTB10H (US) (anada) 41

42 Tees Lateral Tees (BT) continued Used to change direction at 90 at lower resistance flow. NOTE: LATERAL TEE (BT) ONLY AVAILABLE UP TO 24. FOR SIZES 26-36, USE A OMBINATION OF 45O TEE (T45) AND 45O ELBOW (E45). For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR- 0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). A B TAP E I.D. IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) A B E Product ode A B E Product ode A B E / / /16 IX2-5BT 27 1/ / /16 9 7/16 IX4-5BT 24 1/ / /16 8 7/16 IX3Z-5BT /8 16 7/ / /16 IX2-6BT 28 1/2 21 1/4 18 9/16 9 7/8 IX4-6BT 25 21/ / /4 8 15/16 IX3Z-6BT / / /16 8 7/16 IX2-7BT 29 15/ /2 19 1/2 10 7/16 IX4-7BT 27 3/ / /32 9 7/16 IX3Z-7BT / /8 16 3/4 8 15/16 IX2-8BT 31 5/ / / /16 IX4-8BT 28 1/2 21 9/ / /16 IX3Z-8BT / / /16 9 7/16 IX2-9BT 32 3/4 24 7/8 21 5/ /8 IX4-9BT 29 29/ / / /16 IX3Z-9BT /2 21 1/4 18 9/16 9 7/8 IX2-10BT 34 3/ /8 22 1/ /16 IX4-10BT 31 5/ / / /16 IX3Z-10BT / /2 19 1/2 10 7/16 IX2-11BT 35 9/ / / /16 IX4-11BT 32 3/ / / /16 IX3Z-11BT / / / /16 IX2-12BT /2 25 3/4 13 3/16 IX4-12BT 34 5/ / / /16 IX3Z-12BT /4 24 7/8 21 5/ /8 IX2-13BT 40 7/ / / /4 IX4-13BT 35 9/ / / /16 IX3Z-13BT / /8 22 1/ /16 IX2-14BT 41 13/ / /8 14 3/16 IX4-14BT 38 31/ /2 25 3/4 13 7/32 IX3Z-14BT /2 25 3/4 13 3/16 IX2-16BT 44 5/8 34 3/8 29 7/ /4 IX4-16BT 41 13/ / / /32 IX3Z-16BT / / /8 14 3/16 IX2-18BT 47 1/2 36 3/4 31 1/4 16 3/16 IX4-18BT 44 5/ / / /32 IX3Z-18BT /8 34 3/8 29 7/ /4 IX2-20BT 50 5/ / / /4 IX4-20BT 47 15/ /4 31 1/4 16 7/32 IX3Z-20BT /2 36 3/4 31 1/4 16 3/16 IX2-22BT 53 1/8 41 5/ / /4 IX4-22BT 50 9/ / / /32 IX3Z-22BT / / / /4 IX2-24BT 59 15/ / /16 IX4-24BT 53 1/8 41 9/ / /32 IX3Z-24BT Product ode Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = 0.55 Also available with Smaller TAP diameter (tap). ode for Smaller Tap : SLBTB(tap), AX1-BTB(tap), IX1-BTB(tap), IX2-BTB(tap), IX4-BTB(tap). ode example for Smaller Tap: a IX1 Lateral Tee of 12 with a tap of 10 = AX1-12BTB10. Also available with Smaller TAPS (TAPS) and Smaller Height. ode for Smaller TAPS & Smaller Height: SLBTB(tap)H(tap), AX1-BTB(tap)H(tap), IX1-BTB(tap)H(tap), IX2-BTB(tap) H(tap), IX4-BTB(tap)H(tap). ode example for smaller Taps and smaller Height: a IX1 Lateral Tee of 12 with a tap of 10 and the Height of a regular BT of 10 = AX1-12BTB10H Security himneys

43 Tee Accessories / Access Tee ap (T) Used to close, seal or provide access for cleanout unused tee ports. For SL: One (1) disc with handle, and one (1) SMALL Locking Inner "V" Band (BSI). For AX1: One (1) disc with handle, one (1) SMALLER Locking Inner "V" Band (BSI), one (1) LARGER Locking Inner "V" Band, and one (1) outer bucket-casing with handles. For IX1, IX2, and IX4: One (1) disc with handle, one (1) SMALLER Locking Inner "V" Band (BSI), one (1) LARGER Locking Inner "V" Band, one (1) outer bucket-casing with handles, one (1) (IX1, IX2) or two (2) (IX4) round Insulated pad, and one (1) insulation wrap. For IX3Z: One (1) disc, one (1) SMALL Locking Inner "V" Band (BSI), one (1) LARGE Locking Inner "V" Band, one (1) outer casing, one (1) insulation wrap, three (3) insulation disc. EFFETIVE LENGTH TOTAL LENGTH 5 to 36 Total SL (Single Wall) AX1 (1 Air Insulated) / IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) Product ode Total Product ode Total 1 1 SLT 5 1/2 2 3/4 AX1-T IX1-T 6 1/2 3 3/4 IX2-T 8 1/2 5 3/4 IX4-T 7 1/2 4 3/4 IX3Z-T Product ode Total Product ode Total Product ode Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Drain Tee ap (DT) Used to close and seal unused tee ports and to provide drain point for grease or condensation at the base of a vertical duct run. 1" NPT nipple. For SL : One (1) disc with a 1" NPT nipple and one (1) SMALL Locking Inner "V" Band (BSI). For AX1: One (1) disc with a 1 NPT, one (1) SMALLER Locking Inner "V" Band (BSI), one (1) LARGER Locking Inner "V" Band, and one (1) outer bucket-casing with handles. For IX1, IX2, and IX4: One (1) disc with a 1 NPT, one (1) SMALLER Locking Inner "V" Band (BSI), one (1) LARGER Locking Inner "V" Band, one (1) outer bucket-casing with Handles, one (1) (IX1 and IX2) or two (2) (IX4 only) round Insulated pad, and one (1) insulation wrap. For IX3Z: One (1) disc with a 1 NPT, one (1) SMALL Locking Inner "V" Band (BSI), one (1) LARGE Locking Inner "V" Band, one (1) outer casing, one (1) insulation wrap, three (3) insulation disc. 1" NPT Nipple TOTAL EFFETIVE LENGTH LENGTH 5 to 36 Total SL (Single Wall) AX1 (1" Air Insulated) / IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) Product ode Total Product ode Total Product ode Total Product ode Total Product ode 2 2 SLDT 5 1/2 3 AX1-DT AX1-DT 6 1/2 4 IX2-DT 8 1/2 6 IX4-DT 7 1/2 4 7/8 IX3Z-DT Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, (US) (anada) 43

44 onnections - Starting Adaptors Tapered Increaser Adaptors (TIN) +B Used when a pipe diameter changes (increasing) is required. Tapered increasers are preferred over Step Increasers when space permits. For SL: All items for the LARGER diameter: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: All items for the LARGER diameter: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR- 0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: All items for the LARGER diameter: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). E From 5 to 14, diameter increments by 1 From 16 to 34, diameter increments by 2 B - E / / / / / / / / /4 12 SL (Single Wall) AX1 (1" Air Insulated) IX1 (1" Wool Insulated) Product ode IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) SLTIN(+B) AX1-TIN(+B) IX1-TIN(+B) IX2-TIN(+B) IX4-TIN(+B) IX3Z-TIN(+B) Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = 0.63 [1 - (/(+B)) 2 ] 2 / (/(+B)) 4 Eccentric Tapered Increaser Adaptors (ETIN) +B Used when a pipe diameter changes (increasing) and a flat bottom on horizontal runs is required. D For SL : All items for the LARGER diameter: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: All items for the LARGER diameter: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: All items for the LARGER diameter: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). E From 5 to 14, diameter increments by 1 From 16 to 34, diameter increments by 2 B - D - E /4 1/ / /4 1 1/ / /4 2 1/ / / / / SL (Single Wall) Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = 0.63 [1 - (/(+B)) 2 ] 2 / (/(+B)) 4 44 Security himneys AX1 (1" Air Insulated) IX1 (1" Wool Insulated) Product ode IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) SLETIN(+B) AX1-ETIN(+B) IX1-ETIN(+B) IX2-ETIN(+B) IX4-ETIN(+B) IX3Z-ETIN(+B)

45 onnections - Starting Adaptors Step Increaser Adaptors (IN) Used when a pipe diameter change (increasing) is required in a small space. NOTE: Tapered Increasers are preferred over Step Increasers when space permits. NOT AVAILABLE FOR MODEL IX3Z For SL: All items for the LARGER diameter: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794). For AX1: All items for the LARGER diameter: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: All items for the LARGER diameter: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). + B EFFETIVE LENGTH From 5 to 14, diameter increments by 1 From 16 to 34, diameter increments by 2 B 1 to 6 2, 4 or 6 - Product ode SL (Single Wall) AX1 (1 Air Insulated) IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) 8 5/8 SLIN(+B) AX1-IN(+B) IX1-IN(+B) IX2-IN(+B) IX4-IN(+B) Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = [1 - (/(+B)) 2 ] 2 Tapered Reducer Adaptors (TRD) Used when a pipe diameter change (reducing) is required. NOTE: NOT AVAILABLE FOR MODEL IX3Z For SL: All items for the SMALLER diameter: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794). For AX1: All items for the SMALLER diameter: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: All items for the SMALLER diameter: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). E +B From 6 to 14, diameter increments by 1 From 16 to 36, diameter increments by 2 B - E / / / / / / / / /4 12 SL (Single Wall) AX1 (1 Air Insulated) Product ode IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) SLTRD(-B) AX1-TRD(-B) IX1-TRD(-B)) IX2-TRD(-B)) IX4-TRD(-B) Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = 0.63 [1 - (/(+B)) 2 ] 2 / (/(+B)) (US) (anada) 45

46 onnections - Starting Adaptors ANSI Flange Adaptors (TRD) Used to attache flue components to a class 125 lb or 150 lb ANSI. Dimensions are per ANSI 125 lb. Nut, Bolts and gasket kit for the ANSI flange are not included. NOTE: For AX1, IX1, IX2, and IX4, the Outer Band (BSE) works as the outer wall of the adaptor. NOT AVAILABLE FOR MODEL IX3Z. For SL: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). EFFETIVE LENGTH Product ode SL (Single Wall) AX1 (1 Air Insulated) IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) 5 to 36 3 SLFA AX1-FA IX1-FA IX2-FA IX4-FA Material options (Inner): 304, 316 Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts,: K = 0.25 (eff. length [ft] / [in]) Single Wall Adaptor (SWA) Used to attache pipe straight shank outlets. NOTE: For IX1, IX2, IX4, and AX1, the outerband (BSE) can be used as the outer wall of the adaptor. NOT AVAILABLE FOR MODEL IX3Z. For SL : One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) Locking Band (BS) and a Retaining Band. For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) Locking Band (BS), one (1) Reataining Band, and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) Locking Band (BS), one (1) Retaining Band, one (1) 6 insulation band, and one (1) Outer Band (BSE). EFFETIVE LENGTH Product ode SL (Single Wall) AX1 (1 Air Insulated) IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) 5 to /8 SLSWA AX1-SWA IX1-SWA IX2-SWA IX4-SWA Material options (Inner): 304, 316 Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts,: K = 0.25 (eff. length [ft] / [in]) 46 Security himneys

47 onnections - Starting Adaptors Single Wall Adaptor with Test port (SWAN) Used to attach pipe straight shank outlets and has a 1/2 x3 NPT test port with a cap. NOTE: The Outer Band (BSE) can be used as the outer wall of the adaptor. If the BSE is used, it must be field cut to let the nozzle pass through. NOT AVAILABLE FOR MODEL IX3Z For SL : One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) Locking Band (BS) and a Retaining Band. For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) Locking Band (BS), one (1) Reataining Band, and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) Locking Band (BS), one (1) Retaining Band, one (1) 6 insulation band, and one (1) Outer Band (BSE). 1" NPT Nipple with cap EFFETIVE LENGTH SL (Single Wall) Material options (Inner): 304, 316 Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts,: K = 0.25 (eff. length [ft] / [in]) AX1 (1 Air Insulated) Product ode IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) 5 to /8 SLSWAN AX1-SWAN IX1-SWAN IX2-SWAN IX4-SWAN B Half Universal Flange (HUF) Used to connect a pipe to a boiler or other appliance having a flange outlet with 4, 6, 8, 12, 16, 24, or no bolt pattern. NOTE: NOT AVAILABLE FOR MODEL IX3Z For SL: Four (4) Half lamp Plates of 1/8 thickness. For AX: 1 Four (4) Half lamp Plates, and two (2) Half Outer Band (DBSE). For IX1, IX2 and IX4: Four (4) Half lamp Plates, two (2) Half Outer Band (DBSE), and two (2) 3 insulation band. A 15 1" x 3/8" Slot 1/4 A (I.D.) Material options (Inner): SS B (B..) (O.D.) SL (Single Wall) AX1 (1 Air Insulated) Product ode IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) 5 to / / /4 SLHUF AX1-HUF IX1-HUF IX2-HUF IX4-HUF (US) (anada) 47

48 onnections - Starting Adaptors Square to Round (STRAB) or Round to Square (RTSAB), where A & B are the square dimensions Used to connect a round chimney to a square/rectangular connection and vice versa. The square dimension is designed to be connected by means of lap of weld on the field. These parts are always considered custom parts. NOTE: ALL DIMENSIONS DATA MUST BE ANALYSED AND APPROVED BY SEURITY HIMNEYS TEHNIAL SUPPORT BEFORE ORDERING. NOT AVAILABLE FOR MODEL IX3Z. Dimensional data to specify : - the exact size of the outer dimensions of the square or rectangular (A x B) ; - the diameter of the round end (i.e. the SL, AX1, IX1, IX2, and IX4 flue dimension); - the effective height; - the flange dimension on the square or rectangular end if not 1 1/2; - the option of the square flange: Option #1 = a 1 Flue extension on the square/rectangle side, Option #2 = No flue Extension on the square/rectanglular side. NOTE: Standard dimensions will be as follow: - Option #1 - length = /2 wide flange on the square/rectangular. For SL: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2 and IX4: One(1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). EFFETIVE LENGTH SideView Option Square Flange #1 A x B B /2 A EFFETIVE LENGTH SideView Option Square Flange #2 A x B 3 1 1/2 Square Dimensions A B Option SL (Single Wall) AX1 (1 Air Insulated) Product ode IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) 5 to or ustom ustom ustom #1 or #2 SLSTRAB AX1-STRAB IX1-STRAB IX2-STRAB IX4-STRAB SLRTSAB AX1-RTSAB IX1-RTSAB IX2-RTSAB IX4-RTSAB Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = unknown (custom) Eccentric Square to Round (USTOM) or Eccentric Round to Square (USTOM), where A & B are the square dimensions and the and D is the offset of the round part. It is similar to a STR except the round collar is offset from center of the square collar. Same used as the STR, but can have a flat bottom on horizontal runs or provide an offset ( X D). The square dimension is designed to be connected by means of lap of weld on the field. NOTE: ALL DIMENSIONS DATA MUST BE ANALYSED AND APPROUVED BY SEURITY HIMNEY TEHNIAL SUPPORTS BEFORE ORDERING. NOT AVAILABLE FOR MODEL IX3Z. Dimensional data to specify : - the exact size of the outer dimensions of the square or rectangular (A x B); - Specify the offset dimensions x D refered to one outer side of the square and the center of the round end; - the diameter of the round end (i.e. the SL, AX PRO or IX PRO flue dimension); - the effective height; - the flange dimension on the square or rectangular end if not 1 1/2; - the option of the square flange: Option #1 = a 1 Flue extension on the square/rectangle side, Option #2 = No flue Extension on the square/rectanglular side. B SideView Option Square Flange #1 D A SideView Option Square Flange #2 For SL: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2 and IX4: One(1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). EFFETIVE LENGTH x D A x B EFFETIVE LENGTH 1 1/2 x D A x B 1 1/2 Square Dimensions Dimensions (from the center) A B D Option 5 to 36 ustom ustom ustom ustom ustom #1 or #2 SL (Single Wall) AX1 (1 Air Insulated) Product ode IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) ustom ustom ustom ustom ustom ustom ustom ustom ustom ustom Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = unknown (custom) 48 Security himneys

49 onnections - Starting Adaptors Fan Adaptor (FAN) Used to connect to a fan or any kind of device that requires a square plate adapter. Standard square plate size. For SL: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2 and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). FOR IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794). EFFETIVE LENGTH A x B 5 to 36 A B SL (Single Wall) AX1 (1" Air Insulated) IX1 (1" Wool Insulated) Product ode IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) SLFAN AX1-FAN IX1-FAN IX2-FAN IX4-FAN IX3Z-FAN Also available custom plate size as custom part. Dimension A and B must be specified Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: 6 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts,: K = 0.25 (eff. length [ft] / [in]) Accessories Relief Valve (RV) For use on all engine exhaust applications. It helps to control the venting pressure when a backfire occurs. onsists of a spring loaded disk valve mounted on an ANSI Flange. Must be used in conjunction with a ANSI Flange adaptor (FA) and a 45 Tee (T45). The nuts, bolts and gasket kit for ANSI are not included (by others). NOTE: NOT AVAILABLE FOR MODEL IX3Z. For SL, AX1, IX1, IX2 and IX4: One (1) Relief Valve (RV) only. 11 1/2 ANSI FLANGE BOLT PATTERN SL (Single Wall) AX1 (1" Air Insulated) Product ode IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) 5 to /2 SLRV AX1-RV IX1-RV IX2-RV IX4-RV Damper (LxxDAMP) Used to ensure optimum pressures through an appliance. It will aid in the proper operation and efficiency of the appliance by preventing higher than desired draft readings. It has a disc inside the flue. This disc can be controled and rotated from 0 to 90 manually from the outside of the part by the mean of a rod and braket. NOTE: NOT AVAILABLE FOR MODEL IX3Z. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). EFFETIVE LENGTH Product ode SL (Single Wall) AX1 (1 Air Insulated) IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) 5 to /8 SLL12DAMP AX1-L12DAMP IX1-L12DAMP IX2-L12DAMP IX4-L12DAMP 13 to /8 SLL18DAMP AX1-L18DAMP IX1-L18DAMP IX2-L18DAMP IX4-L18DAMP 20 to /8 SLL24DAMP AX1-L24DAMP IX1-L24DAMP IX2-L24DAMP IX4-L24DAMP Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: 5 to 24: 0 to (US) (anada) 49

50 Supports Half Angle Ring (HAR) Used for supporting and guiding the chimney on horizontal runs. See installation instructions for spacing. = 0 For SL, AX1, IX1, IX2, and IX4, and IX3Z: One (1) Half Angle Ring (HAR) only. Hardware for connection to structure is not included (by others). D E D A + (2*) B (B..) A F G x 1/2" x 1" A (I.D.) B (B..) (Total ) D E F G (# holes per half) SL (Single Wall) AX1 (1" Air Insulated) Product ode IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) 5 1/16 6 5/16 1 1/ SL5HAR /32 7 5/16 1 1/4 1/ SL6HAR /8 8 1/2 1 1/4 1/ SL7HAR AX1-5HAR IX1-5HAR /8 9 1/2 1 1/4 1/ SL8HAR AX1-6HAR IX1-6HAR /8 10 5/8 1 1/4 1/ SL9HAR AX1-7HAR IX1-7HAR IX2-5HAR /8 11 1/2 1 1/4 1/ SL10HAR AX1-8HAR IX1-8HAR IX2-6HAR /8 12 3/4 1 1/4 1/ SL11HAR AX1-9HAR IX1-9HAR IX2-7HAR / /16 1 1/2 1/ SL12HAR AX1-10HAR IX1-10HAR IX2-8HAR / /2 1/ SL13HAR AX1-11HAR IX1-11HAR IX2-9HAR IX4-5HAR 14 3/ /2 1/ SL14HAR AX1-12HAR IX1-12HAR IX2-10HAR IX4-6HAR 15 3/ /2 1/ AX1-13HAR IX1-13HAR IX2-11HAR IX4-7HAR 16 3/ /2 1/ SL16HAR AX1-14HAR IX1-14HAR IX2-12HAR IX4-8HAR 17 3/ /2 1/ IX2-13HAR IX4-9HAR 18 3/ /4 1 1/2 1/ SL18HAR AX1-16HAR IX1-16HAR IX2-14HAR IX4-10HAR 19 3/ /4 1 1/2 1/ IX4-11HAR 20 3/ /4 1 1/2 1/ SL20HAR AX1-18HAR IX1-18HAR IX2-16HAR IX4-12HAR 21 3/ /4 1 1/2 1/ IX4-13HAR 22 3/ /4 1 1/2 1/ SL22HAR AX1-20HAR IX1-20HAR IX2-18HAR IX4-14HAR 24 3/ /4 1 1/2 1/ SL24HAR AX1-22HAR IX1-22HAR IX2-20HAR IX4-16HAR 26 3/ /8 2 1/ SL26HAR AX1-24HAR IX1-24HAR IX2-22HAR IX4-18HAR 28 3/ /8 2 1/ SL28HAR AX1-26HAR IX1-26HAR IX2-24HAR IX4-20HAR 30 3/ /8 2 1/ SL30HAR AX1-28HAR IX1-28HAR IX2-26HAR IX4-22HAR 32 3/ /8 2 1/ SL32HAR AX1-30HAR IX1-30HAR IX2-28HAR IX4-24HAR 34 3/ /8 2 1/ SL34HAR AX1-32HAR IX1-32HAR IX2-30HAR IX4-26HAR 36 3/ /8 2 1/ SL36HAR AX1-34HAR IX1-34HAR IX2-32HAR IX4-28HAR 38 3/ /8 2 1/ AX1-36HAR IX1-36HAR IX2-34HAR IX4-30HAR 40 3/ /8 2 1/ IX2-36HAR IX4-32HAR 42 3/ /8 2 1/ IX4-34HAR 44 3/ /8 2 1/ IX4-36HAR Material options (angle): - 5 to 10 = 304, 11 to 44 = Security himneys

51 Supports Half Angle Ring (HAR) continued Used for supporting and guiding the chimney on horizontal runs. See installation instructions for spacing. = 0 For SL, AX1, IX1, IX2, and IX4, and IX3Z: One (1) Half Angle Ring (HAR) only. Hardware for connection to structure is not included (by others). D E D A + (2*) B (B..) A F G x 1/2" x 1" A (I.D.) B (B..) (Total ) D E F G (# holes per half) Product ode IX3Z (3" Wool Insulated) 11 1/8 12 3/4 1 1/4 1/ IX3Z-5HAR 12 3/ /16 1 1/2 1/ IX3Z-6HAR 13 3/ /2 1/ IX3Z-7HAR 14 3/ /2 1/ IX3Z-8HAR 15 3/ /2 1/ IX3Z-9HAR 16 3/ /2 1/ IX3Z-10HAR 17 3/ /2 1/ IX3Z-11HAR 18 3/ /4 1 1/2 1/ IX3Z-12HAR 19 3/ /4 1 1/2 1/ IX3Z-13HAR 20 3/ /4 1 1/2 1/ IX3Z-14HAR 22 3/ /4 1 1/2 1/ IX3Z-16HAR 24 3/ /4 1 1/2 1/ IX3Z-18HAR 26 3/ /8 2 1/ IX3Z-20HAR 28 3/ /8 2 1/ IX3Z-22HAR 30 3/ /8 2 1/ IX3Z-24HAR 32 3/ /8 2 1/ IX3Z-26HAR 34 3/ /8 2 1/ IX3Z-28HAR 36 3/ /8 2 1/ IX3Z-30HAR 38 3/ /8 2 1/ IX3Z-32HAR 40 3/ /8 2 1/ IX3Z-34HAR 42 3/ /8 2 1/ IX3Z-36HAR Material options (angle): - 5 to 10 = 304, 11 to 44 = (US) (anada) 51

52 Supports Full Angle Ring (FAR) Used for support on horizontal runs or for guiding on vertical runs. See installation instructions for spacing. = 0. Same dimensions as the Half Angle Ring (HAR). For SL, AX1, IX1, IX2, and IX4, and IX3Z: Two (2) Half Angle Ring (HAR), and hardware to join both Half Angle Rings. Hardware for connection to structure is not included (by others). D E D A + (2*) B (B..) A F G x 1/2" x 1" A (I.D.) B (B..) (Total ) D E F G (#holes per half) SL (Single Wall) AX1 (1" Air Insulated) IX1 (1" Wool Insulated) Product ode IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) See HAR SLFAR AX1-FAR IX1-FAR IX2-FAR IX4-FAR IX3Z-FAR Material options (angle): - 5 to 10 = 304, 11 to 44 = 439 Anchor Plate (AP) Used for supporting the himney in vertical or horizontal runs and to provide a fixed point for thermal expansion consideration. The square opening of the frame must be a minimum of O.D. + 3/4 or a maximum of O.D /4. = 0 3/4 3/4 Must not be in contact with combustible materials. For SL: Four (4) Split Square plates, four (4) clamps ring, and hardware included. For AX1: Four (4) Split Square plates, four (4) clamps ring, two (2) half outer band (DBSE), and hardware included. For IX1, IX2, and IX4: Four (4) Split Square plates, four (4) clamps ring, two (2) Half Outer Band (DBSE) with two (2) 3 insulation bands, and hardware included. For IX3Z: Four (4) Split Square plates, four (4) clamps ring and hardware included. Hardware for connection to structure is not included (by others). A B (B..) A (I.D.) SL (Single Wall) - AX1 (1" Air Insulated) - IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) B (B..) Material options (plates): 439, Galvanized SL (Single Wall) Product ode AX1 (1" Air Insulated) 52 Security himneys IX1 (1" Wool Insulated) B (B..) Product ode IX2 (2" Wool Insulated) B (B..) Product ode IX4 (4" Wool Insulated) B (B..) Product ode IX3Z (3" Wool Insulated) 5 5 1/2 8 1/2 13 SL5AP AX1-5AP IX1-5AP 10 1/2 15 IX2-5AP IX4-5AP 12 3/4 17 IX3Z-5AP 6 6 1/2 9 1/2 14 SL6AP AX1-6AP IX1-6AP 11 1/2 16 IX2-6AP IX4-6AP 13 13/16 18 IX3Z-6AP 7 7 1/2 10 5/8 15 SL7AP AX1-7AP IX1-7AP IX2-7AP IX4-7AP IX3Z-7AP 8 8 1/2 11 1/2 16 SL8AP AX1-8AP IX1-8AP IX2-8AP IX4-8AP IX3Z-8AP 9 9 1/2 12 3/4 17 SL9AP AX1-9AP IX1-9AP IX2-9AP 1 3/4 23 IX4-9AP IX3Z-9AP / /16 18 SL10AP AX1-10AP IX1-10AP IX2-10AP 1 3/4 24 IX4-10AP IX3Z-10AP / SL11AP AX1-11AP IX1-11AP IX2-11AP 1 3/4 25 IX4-11AP IX3Z-11AP / SL12AP AX1-12AP IX1-12AP IX2-12AP 1 3/4 26 IX4-12AP 19 3/4 24 IX3Z-12AP / SL13AP AX1-13AP IX1-13AP 1 3/4 23 IX2-13AP 1 3/4 27 IX4-13AP 20 3/4 25 IX3Z-13AP / SL14AP AX1-14AP IX1-14AP 1 3/4 24 IX2-14AP 1 3/4 28 IX4-14AP 21 3/4 26 IX3Z-14AP /2 19 3/4 24 SL16AP AX1-16AP IX1-16AP 1 3/4 26 IX2-16AP 1 3/4 30 IX4-16AP 23 3/4 28 IX3Z-16AP /2 21 3/4 26 SL18AP AX1-18AP IX1-18AP 1 3/4 28 IX2-18AP 28 3/8 32 IX4-18AP 25 3/4 30 IX3Z-18AP /2 23 3/4 28 SL20AP AX1-20AP IX1-20AP 1 3/4 30 IX2-20AP 30 3/8 34 IX4-20AP 28 3/8 32 IX3Z-20AP /2 25 3/4 30 SL22AP AX1-22AP IX1-22AP 28 3/8 32 IX2-22AP 32 3/8 36 IX4-22AP 30 3/8 34 IX3Z-22AP /2 28 3/8 32 SL24AP AX1-24AP IX1-24AP 30 3/8 34 IX2-24AP 34 3/8 38 IX4-24AP 32 3/8 36 IX3Z-24AP /2 30 3/8 34 SL26AP AX1-26AP IX1-26AP 32 3/8 36 IX2-26AP 36 3/8 40 IX4-26AP 34 3/8 38 IX3Z-26AP /2 32 3/8 36 SL28AP AX1-28AP IX1-28AP 34 3/8 38 IX2-28AP 38 3/8 42 IX4-28AP 36 3/8 40 IX3Z-28AP /2 34 3/8 38 SL30AP AX1-30AP IX1-30AP 36 3/8 40 IX2-30AP 40 3/8 44 IX4-30AP 38 3/8 42 IX3Z-30AP /2 36 3/8 40 SL32AP AX1-32AP IX1-32AP 38 3/8 42 IX2-32AP 42 3/8 46 IX4-32AP 40 3/8 44 IX3Z-32AP /2 38 3/8 42 SL34AP AX1-34AP IX1-34AP 40 3/8 44 IX2-34AP 44 3/8 48 IX4-34AP 42 3/8 46 IX3Z-34AP /2 40 3/8 44 SL36AP AX1-36AP IX1-36AP 42 3/8 46 IX2-36AP 46 3/8 50 IX4-36AP 44 3/8 48 IX3Z-36AP

53 Supports Anchor Plate (APL) Used for supporting the duct on vertical or horizontal runs. annot be used as fixed supports because the anchor plates are free to move on the longitudinal axis of the length. For thermal expansion consideration and fixed support, use an Anchor Plate (AP). It is a single wall part, but for the Secure Stack Pro Series, use the Outer Band (BSE) as the outer wall. The square opening of the frame must be a minimum of O.D. + 1/2 or a maximum of O.D /4. Must not be in contact with combustible materials. For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794,) and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). For IX3Z: One Locking Inner "V" Band (BSI) and one entering Flue Extension (PR-0794) and one Locking Outer Band (BSE) B EFFETIVE LENGTH SL (Single Wall) - AX1 (1" Air Insulated) - IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) B SL (Single Wall) Product ode AX1 (1" Air Insulated) IX1 (1" Wool Insulated) B Product ode IX2 (2" Wool Insulated) B Product ode IX4 (4" Wool Insulated) B Product ode IX3Z (3" Wool Insulated) 5 to SLAPL AX1-APL IX1-APL + 8 IX2-APL + 12 IX4-APL + 10 IX3Z-APL Material options (inner): 304, 316 Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts,: K = 0.25 (eff. length [ft] / [in]) (US) (anada) 53

54 Supports Heavy Duty Wall Support (WSHD) Used for supporting the vent in vertical runs and to provide a fixed point for thermal expansion consideration. It can maintain a clearance to the wall from 1 1/2 to 10 by adjusting the extendable braces. See instruction manual for required specifications. = 0. For SL: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, and hardware included. Hardware for connection to structure are not included (by others). For AX1: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, two (2) Half Outer Band (DBSE), and hardware included. Hardware for connection to structure are not included (by others). For IX1, IX2, and IX4: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, two (2) Half Outer Band (DBSE) with two (2) 3 insulation band, and hardware included. Hardware for connection to structure is not included (by others). For IX3Z: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, and hardware included. Hardware for connection to structure are not included (by others). E B A SL (Single Wall) - AX1 (1" Air Insulated) - IX1 (1" Wool Insulated) A - lamp Dia. B - Inside FAR Dia. - Height E - learance from building to the outer wall Product ode MIN MAX MIN MAX SL (Single Wall) AX1 (1" Air Insulated) IX1 (1" Insulated) 5 1/2 7 1/ / /16 1 1/4 10 SL5WSHD AX1-5WSHD IX1-5WSHD 6 1/2 8 1/8 14 7/ /32 1 1/4 10 SL6WSHD AX1-6WSHD IX1-6WSHD 7 1/2 9 1/8 14 5/8 20 3/32 1 1/4 10 SL7WSHD AX1-7WSHD IX1-7WSHD 8 1/2 10 1/8 15 3/ /4 1 1/4 10 SL8WSHD AX1-8WSHD IX1-8WSHD 9 1/2 11 1/8 15 1/2 21 1/4 1 1/4 10 SL9WSHD AX1-9WSHD IX1-9WSHD 10 1/2 12 3/ / /32 1 1/2 10 SL10WSHD AX1-10WSHD IX1-10WSHD 11 1/2 13 3/ / /8 1 1/2 10 SL11WSHD AX1-11WSHD IX1-11WSHD 12 1/2 14 3/ / /4 1 1/2 10 SL12WSHD AX1-12WSHD IX1-12WSHD 13 1/2 15 3/ / /32 1 1/2 10 SL13WSHD AX1-13WSHD IX1-13WSHD 14 1/2 16 3/ / /16 1 1/2 10 SL14WSHD AX1-14WSHD IX1-14WSHD 16 1/2 18 3/ / /8 1 1/2 10 SL16WSHD AX1-16WSHD IX1-16WSHD 18 1/2 20 3/ / /16 1 1/2 10 SL18WSHD AX1-18WSHD IX1-18WSHD 20 1/2 22 3/ / /32 1 1/2 10 SL20WSHD AX1-20WSHD IX1-20WSHD 22 1/2 24 3/ / /8 1 1/2 10 SL22WSHD AX1-22WSHD IX1-22WSHD 24 1/2 26 3/ / / SL24WSHD AX1-24WSHD IX1-24WSHD 26 1/2 28 3/ / / SL26WSHD AX1-26WSHD IX1-26WSHD 28 1/2 30 3/ / / SL28WSHD AX1-28WSHD IX1-28WSHD 30 1/2 32 3/ / / SL30WSHD AX1-30WSHD IX1-30WSHD 32 1/2 34 3/ / / SL32WSHD AX1-32WSHD IX1-32WSHD 34 1/2 36 3/ / / SL34WSHD AX1-34WSHD IX1-34WSHD 36 1/2 38 3/ / / SL36WSHD AX1-36WSHD IX1-36WSHD Material options (plates): 439, Galvanized 54 Security himneys

55 Supports Heavy Duty Wall Support (WSHD) continued Used for supporting the vent in vertical runs and to provide a fixed point for thermal expansion consideration. It can maintain a clearance to the wall from 1 1/2 to 10 by adjusting the extendable braces. See instruction manual for required specifications. = 0. For SL: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, and hardware included. Hardware for connection to structure are not included (by others). For AX1: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, two (2) Half Outer Band (DBSE), and hardware included. Hardware for connection to structure are not included (by others). For IX1, IX2, and IX4: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, two (2) Half Outer Band (DBSE) with two (2) 3 insulation band, and hardware included. Hardware for connection to structure is not included (by others). For IX3Z: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, and hardware included. Hardware for connection to structure are not included (by others). E B A IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) A - lamp Dia. B - Inside FAR Dia. - Height E - learance from building to the outer wall Product ode B - Inside FAR Dia. - Height E - learance from building to the outer wall Product ode MIN MAX MIN MAX IX2 (2" Wool Insulated) MIN MAX MIN MAX IX4 (4" Wool Insulated) 5 1/2 9 1/8 14 5/8 20 3/32 1 1/4 10 IX2-5WSHD 13 3/ / /8 1 1/2 10 IX4-5WSHD 6 1/2 10 1/8 15 3/ /4 1 1/4 10 IX2-6WSHD 14 3/ / /4 1 1/2 10 IX4-6WSHD 7 1/2 11 1/8 15 1/2 21 1/4 1 1/4 10 IX2-7WSHD 15 3/ / /32 1 1/2 10 IX4-7WSHD 8 1/2 12 3/ / /32 1 1/2 10 IX2-8WSHD 16 3/ / /16 1 1/2 10 IX4-8WSHD 9 1/2 13 3/ / /8 1 1/2 10 IX2-9WSHD 17 3/ /32 1 1/2 10 IX4-9WSHD 10 1/2 14 3/ / /4 1 1/2 10 IX2-10WSHD 18 3/ / /8 1 1/2 10 IX4-10WSHD 11 1/2 15 3/ / /32 1 1/2 10 IX2-11WSHD 19 3/ /8 25 7/32 1 1/2 10 IX4-11WSHD 12 1/2 16 3/ / /16 1 1/2 10 IX2-12WSHD 20 3/ / /16 1 1/2 10 IX4-12WSHD 13 1/2 17 3/ /32 1 1/2 10 IX2-13WSHD 21 3/ / /8 1 1/2 10 IX4-13WSHD 14 1/2 18 3/ / /8 1 1/2 10 IX2-14WSHD 22 3/ / /32 1 1/2 10 IX4-14WSHD 16 1/2 20 3/ / /16 1 1/2 10 IX2-16WSHD 24 3/ / /8 1 1/2 10 IX4-16WSHD 18 1/2 22 3/ / /32 1 1/2 10 IX2-18WSHD 26 3/ / / IX4-18WSHD 20 1/2 24 3/ / /8 1 1/2 10 IX2-20WSHD 28 3/ / / IX4-20WSHD 22 1/2 26 3/ / / IX2-22WSHD 30 3/ / / IX4-22WSHD 24 1/2 28 3/ / / IX2-24WSHD 32 3/ / / IX4-24WSHD 26 1/2 30 3/ / / IX2-26WSHD 34 3/ / / IX4-26WSHD 28 1/2 32 3/ / / IX2-28WSHD 36 3/ / / IX4-28WSHD 30 1/2 34 3/ / / IX2-30WSHD 38 3/ / / IX4-30WSHD 32 1/2 36 3/ / / IX2-32WSHD 40 3/ / / IX4-32WSHD 34 1/2 38 3/ / / IX2-34WSHD 42 3/ /2 35 5/ IX4-34WSHD 36 1/2 40 3/ / / IX2-36WSHD 44 3/ / / IX4-36WSHD Material options (plates): 439, Galvanized (US) (anada) 55

56 Supports Heavy Duty Wall Support (WSHD) continued Used for supporting the vent in vertical runs and to provide a fixed point for thermal expansion consideration. It can maintain a clearance to the wall from 1 1/2 to 10 by adjusting the extendable braces. See instruction manual for required specifications. = 0. For SL: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, and hardware included. Hardware for connection to structure are not included (by others). For AX1: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, two (2) Half Outer Band (DBSE), and hardware included. Hardware for connection to structure are not included (by others). For IX1, IX2, and IX4: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, two (2) Half Outer Band (DBSE) with two (2) 3 insulation band, and hardware included. Hardware for connection to structure is not included (by others). For IX3Z: Four (4) clamps ring, two (2) struts, two (2) adjustable struts, two (2) small wall brackets, two (2) brackets, and hardware included. Hardware for connection to structure are not included (by others). E B A IX3Z (3" Wool Insulated) A - lamp Dia. B - Inside FAR Dia. - Height E - learance from building to the outer wall Product ode MIN MAX MIN MAX IX3Z (3" Wool Insulated) 5 1/2 11 1/ / IX3Z-5WSHD 6 1/2 12 3/ /2 23 5/ IX3Z-6WSHD 7 1/2 13 3/ / IX3Z-7WSHD 8 1/2 14 3/ /2 24 1/ IX3Z-8WSHD 9 1/2 15 3/ / IX3Z-9WSHD 10 1/2 16 3/ /4 26 1/ IX3Z-10WSHD 11 1/2 17 3/ /4 26 1/ IX3Z-11WSHD 12 1/2 18 3/ /4 27 5/ IX3Z-12WSHD 13 1/2 19 3/ / IX3Z-13WSHD 14 1/2 20 3/ /2 27 5/ IX3Z-14WSHD 16 1/2 22 3/ /2 28 1/ IX3Z-16WSHD 18 1/2 24 3/ /2 29 1/ IX3Z-18WSHD 20 1/2 26 3/ / /2 10 IX3Z-20WSHD 22 1/2 28 3/ / /2 10 IX3Z-22WSHD 24 1/2 30 3/ / /2 10 IX3Z-24WSHD 26 1/2 32 3/ / /2 10 IX3Z-26WSHD 28 1/2 34 3/ /4 34 1/2 2 1/2 10 IX3Z-28WSHD 30 1/2 36 3/ /4 35 3/8 2 1/2 10 IX3Z-30WSHD 32 1/2 38 3/ /2 35 5/8 2 1/2 10 IX3Z-32WSHD 34 1/2 40 3/ /2 36 1/2 2 1/2 10 IX3Z-34WSHD 36 1/2 42 3/ /2 37 1/2 2 1/2 10 IX3Z-36WSHD Material options (plates): 439, Galvanized 56 Security himneys

57 Supports Heavy Duty Wall Guide (WGHD) Used for guiding in vertical installation attached to the wall. It can maintain a clearance to the outer wall from 2 1/2 to 10 by adjusting the braces. See instruction manual for required specifications. = 0. For SL, AX1, IX1, IX2, and IX4: One (1) Full Angle Ring (FAR), four (4) struts, four (4) wall brackets, and hardware included. For IX3Z: One (1) FAR, four (4) struts, two (2) small wall brackets, two (2) big wall brackets, two (2) brackets and hardware included. Hardware for connection to structure is not included (by others). D B A A (I.D. of HAR) B - learance MIN MAX Material options (Struts): 439, Galvanized - Total D Total Width MIN MAX MIN MAX SL (Single Wall) AX1 (1 Air Insulated) Product ode IX1 (1 Insulated) IX2 (2 Insulated) 5 1/ / / / /4 SL5WGHD / / / / /16 SL6WGHD / /8 19 3/ / /4 SL7WGHD AX1-5WGHD IX1-5WGHD / / / / /8 SL8WGHD AX1-6WGHD IX1-6WGHD / / / /8 46 9/16 SL9WGHD AX1-7WGHD IX1-7WGHD IX2-5WGHD / / / / /16 SL10WGHD AX1-8WGHD IX1-8WGHD IX2-6WGHD / / / / /16 SL11WGHD AX1-9WGHD IX1-9WGHD IX2-7WGHD / / / /8 54 7/8 SL12WGHD AX1-10WGHD IX1-10WGHD IX2-8WGHD --- IX4 (4 Insulated) 13 3/ /8 22 1/4 49 3/8 57 1/8 SL13WGHD AX1-11WGHD IX1-11WGHD IX2-9WGHD IX4-5WGHD 14 3/ / / /4 59 1/2 SL14WGHD AX1-12WGHD IX1-12WGHD IX2-10WGHD IX4-6WGHD 15 3/ /2 23 5/ /4 61 1/2 --- AX1-13WGHD IX1-13WGHD IX2-11WGHD IX4-7WGHD 16 3/ / / /4 63 9/16 SL16WGHD AX1-14WGHD IX1-14WGHD IX2-12WGHD IX4-8WGHD 17 3/ / / / / IX2-13WGHD IX4-9WGHD 18 3/ / / /2 67 7/16 SL18WGHD AX1-16WGHD IX1-16WGHD IX2-14WGHD IX4-10WGHD 19 3/ / / / / IX4-11WGHD 20 3/ / /4 62 5/8 71 7/8 SL20WGHD AX1-18WGHD IX1-18WGHD IX2-16WGHD IX4-12WGHD 21 3/ / / / IX4-13WGHD 22 3/ / / / /16 SL22WGHD AX1-20WGHD IX1-20WGHD IX2-18WGHD IX4-14WGHD 24 3/ / / /8 80 1/4 SL24WGHD AX1-22WGHD IX1-22WGHD IX2-20WGHD IX4-16WGHD 26 3/16 2 1/ / / / /16 SL26WGHD AX1-24WGHD IX1-24WGHD IX2-22WGHD IX4-18WGHD 28 3/16 2 1/ / / /8 88 1/2 SL28WGHD AX1-26WGHD IX1-26WGHD IX2-24WGHD IX4-20WGHD 30 3/16 2 1/ / /8 82 1/2 92 7/16 SL30WGHD AX1-28WGHD IX1-28WGHD IX2-26WGHD IX4-22WGHD 32 3/16 2 1/ / /8 86 5/8 96 5/8 SL32WGHD AX1-30WGHD IX1-30WGHD IX2-28WGHD IX4-24WGHD 34 3/16 2 1/ / / / /16 SL34WGHD AX1-32WGHD IX1-32WGHD IX2-30WGHD IX4-26WGHD 36 3/16 2 1/ / / / /16 SL36WGHD AX1-34WGHD IX1-34WGHD IX2-32WGHD IX4-28WGHD 38 3/16 2 1/ / / / / AX1-36WGHD IX1-36WGHD IX2-34WGHD IX4-30WGHD 40 3/16 2 1/ / / / / IX2-36WGHD IX4-32WGHD 42 3/16 2 1/ / / / / IX4-34WGHD 44 3/16 2 1/ / / / / IX4-36WGHD (US) (anada) 57

58 Supports Heavy Duty Wall Guide (WGHD) continued Used for guiding in vertical installation attached to the wall. It can maintain a clearance to the outer wall from 2 1/2 to 10 by adjusting the braces. See instruction manual for required specifications. = 0. For SL, AX1, IX1, IX2, and IX4: One (1) Full Angle Ring (FAR), four (4) struts, four (4) wall brackets, and hardware included. For IX3Z: One (1) FAR, four (4) struts, two (2) small wall brackets, two (2) big wall brackets, two (2) brackets and hardware included. Hardware for connection to structure is not included (by others). D B A A (I.D. of HAR) B - learance MIN MAX - Total D Total Width MIN MAX MIN MAX Product ode IX3Z (3" Wool Insulated) 11 1/8 1 3/ / / / /16 IX3Z-5WGHD 12 3/ / / /8 21 1/4 IX3Z-6WGHD 13 3/ / / / /16 IX3Z-7WGHD 14 3/ / / / /4 IX3Z-8WGHD 15 3/ / /8 17 1/2 23 3/8 IX3Z-9WGHD 16 3/ / /8 18 1/ /16 IX3Z-10WGHD 17 3/ / / /16 IX3Z-11WGHD 18 3/ / /2 19 3/ /16 IX3Z-12WGHD 19 3/ / / /16 IX3Z-13WGHD 20 3/ / / / /8 IX3Z-14WGHD 22 3/ / /2 20 3/ /16 IX3Z-16WGHD 24 3/ / /2 21 3/8 27 7/8 IX3Z-18WGHD 26 3/16 2 1/ / /8 21 9/ /8 IX3Z-20WGHD 28 3/16 2 1/ / /8 22 3/4 29 1/16 IX3Z-22WGHD 30 3/16 2 1/ / / /8 IX3Z-24WGHD 32 3/16 2 1/ / / /16 IX3Z-26WGHD 34 3/16 2 1/ / / /4 32 3/8 IX3Z-28WGHD 36 3/16 2 1/ / / / /8 IX3Z-30WGHD 38 3/16 2 1/ / /8 26 9/ /4 IX3Z-32WGHD 40 3/16 2 1/ / /2 27 7/ /4 IX3Z-34WGHD 42 3/16 2 1/ / / /2 35 3/8 IX3Z-36WGHD Material options (Struts): 439, Galvanized 58 Security himneys

59 Supports Heavy Duty Floor Guide Used for guiding in vertical installation when passing through a floor or roof. Maximum square opening dimensions is duct I.D Must not be in contact with combustible. = 0. For SL, AX1, IX1, IX2, and IX4, and IX3Z: One (1) Full Angle Ring (FAR), two (2) struts, two (2) straps, and hardware included. Hardware for connection to structure is not included (by others). A A (I.D. of HAR) SL (Single Wall) Material options (Struts): Galvanized AX1 (1" Air Insulated) Product ode IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) A (I.D. of HAR) Product ode IX3Z (3" Wool Insulated) 5 1/16 SL5FGHD /8 IX3Z-5FGHD 6 3/32 SL6FGHD /16 IX3Z-6FGHD 7 1/8 SL7FGHD AX1-5FGHD IX1-5FGHD /16 IX3Z-7FGHD 8 1/8 SL8FGHD AX1-6FGHD IX1-6FGHD /16 IX3Z-8FGHD 9 1/8 SL9FGHD AX1-7FGHD IX1-7FGHD IX2-5FGHD /16 IX3Z-9FGHD 10 1/8 SL10FGHD AX1-8FGHD IX1-8FGHD IX2-6FGHD /16 IX3Z-10FGHD 11 1/8 SL11FGHD AX1-9FGHD IX1-9FGHD IX2-7FGHD /16 IX3Z-11FGHD 12 3/16 SL12FGHD AX1-10FGHD IX1-10FGHD IX2-8FGHD /16 IX3Z-12FGHD 13 3/16 SL13FGHD AX1-11FGHD IX1-11FGHD IX2-9FGHD IX4-5FGHD 19 3/16 IX3Z-13FGHD 14 3/16 SL14FGHD AX1-12FGHD IX1-12FGHD IX2-10FGHD IX4-6FGHD 20 3/16 IX3Z-14FGHD 15 3/ AX1-13FGHD IX1-13FGHD IX2-11FGHD IX4-7FGHD 22 3/16 IX3Z-16FGHD 16 3/16 SL16FGHD AX1-14FGHD IX1-14FGHD IX2-12FGHD IX4-8FGHD 24 3/16 IX3Z-18FGHD 17 3/ IX2-13FGHD IX4-9FGHD 26 3/16 IX3Z-20FGHD 18 3/16 SL18FGHD AX1-16FGHD IX1-16FGHD IX2-14FGHD IX4-10FGHD 28 3/16 IX3Z-22FGHD 19 3/ IX4-11FGHD 30 3/16 IX3Z-24FGHD 20 3/16 SL20FGHD AX1-18FGHD IX1-18FGHD IX2-16FGHD IX4-12FGHD 32 3/16 IX3Z-26FGHD 21 3/ IX4-13FGHD 34 3/16 IX3Z-28FGHD 22 3/16 SL22FGHD AX1-20FGHD IX1-20FGHD IX2-18FGHD IX4-14FGHD 36 3/16 IX3Z-30FGHD 24 3/16 SL24FGHD AX1-22FGHD IX1-22FGHD IX2-20FGHD IX4-16FGHD 38 3/16 IX3Z-32FGHD 26 3/16 SL26FGHD AX1-24FGHD IX1-24FGHD IX2-22FGHD IX4-18FGHD 40 3/16 IX3Z-34FGHD 28 3/16 SL28FGHD AX1-26FGHD IX1-26FGHD IX2-24FGHD IX4-20FGHD 42 3/16 IX3Z-36FGHD 30 3/16 SL30FGHD AX1-28FGHD IX1-28FGHD IX2-26FGHD IX4-22FGHD /16 SL32FGHD AX1-30FGHD IX1-30FGHD IX2-28FGHD IX4-24FGHD /16 SL34FGHD AX1-32FGHD IX1-32FGHD IX2-30FGHD IX4-26FGHD /16 SL36FGHD AX1-34FGHD IX1-34FGHD IX2-32FGHD IX4-28FGHD / AX1-36FGHD IX1-36FGHD IX2-34FGHD IX4-30FGHD / IX2-36FGHD IX4-32FGHD / IX4-34FGHD / IX4-36FGHD (US) (anada) 59

60 Supports Guy Ring (GR) Used for attaching guys to the chimney stack. The lamp rings have holes at 30 apart (12 holes). It is installed at the flange to flange joint of two sections of pipe. See installation instructions for correct location. Tensioners or anchors not included (by others). = 0. NOTE: NOT AVAILABLE FOR MODEL IX3Z. For SL: Four (4) half lamp Ring, one (1) Storm ollar (S), and hardware included. For AX1: Four (4) half lamp Ring, one (1) Storm ollar (S), two (2) half outer band (DBSE), and hardware included. For IX1, IX2 and IX4: Four (4) half lamp Ring, one (1) Storm ollar (S), two (2) half outer band (DBSE) with two (2) 3 insulation band, and hardware included. Tensioners, anchors and hardware for connection to structure are not included (by others). For IX1, IX2 and IX4: One (1) Locking Inner "V" Band (BSI), one (1) collar kit on the inner liner with a special locking band (BS), two half casing, insulation pad, and hardware. A (I.D.) B (B..) Material options (plates): Galvanized A (I.D.) B (B..) (O.D.) SL (Single Wall) AX1 (1" Air insulated) - IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) (O.D.) Product ode B (B..) (O.D.) AX1 (1 Air insulated) Product ode IX1 (1 Wool Insulated) 5 to / / /2 SL-GR + 3 5/ /2 AX1-5GR IX1-GR + 5 5/ /2 IX2-GR + 9 5/ /2 IX4-GR Thimbles Roof/Floor Thimble (RT) B (B..) Used when pipe passes through a combustible roof / floor structure to reduce clearances to combustibles. The RT allows for pipe expansion and contraction the roof. See installation instructions for hole opening for the right clearance of each diameter and other specifications. = 0. NOTE: NOT AVAILABLE FOR MODELS SL AND IX3Z. For AX1, IX1, IX2, and IX4: One (1) Roof / Floor Thimble only (O.D.) Product ode B (B..) 10 (O.D.) B A D Product ode 1/8 Total A - Plate s Hole B - Wall AX1 (1" Air Insulated) - Roof Square opening dimensions D - Square Plate dimension Product ode A - Plate s Hole B - Wall IX1 (1" Wool Insulated) - Roof Square opening dimensions D - Square Plate dimension Product ode 5 8 1/4 12 1/ AX1-5RT 8 1/4 8 1/ IX1-5RT 6 9 1/4 13 1/ AX1-6RT 9 1/4 9 1/ IX1-6RT /4 15 1/ AX1-7RT 10 1/4 12 1/ IX1-7RT /4 16 1/ AX1-8RT 11 1/4 13 1/ IX1-8RT /4 17 1/ AX1-9RT 12 1/4 14 1/ IX1-9RT /4 18 1/ AX1-10RT 13 1/4 15 1/ IX1-10RT /4 19 1/ AX1-11RT 14 1/4 16 1/ IX1-11RT /4 20 1/ AX1-12RT 15 1/4 17 1/ IX1-12RT /4 21 1/ AX1-13RT 16 1/4 18 1/ IX1-13RT /4 22 1/ AX1-14RT 17 1/4 19 1/ IX1-14RT /4 25 1/ AX1-16RT 19 1/4 22 1/ IX1-16RT /4 27 1/ AX1-18RT 21 1/4 24 1/ IX1-18RT /4 29 1/ AX1-20RT 23 1/4 26 1/ IX1-20RT /4 31 1/ AX1-22RT 25 1/4 28 1/ IX1-22RT /4 34 1/ AX1-24RT 27 1/4 31 1/ IX1-24RT /4 36 1/ AX1-26RT 29 1/4 33 1/ IX1-26RT /4 38 1/ AX1-28RT 31 1/4 35 1/ IX1-28RT /4 40 1/ AX1-30RT 33 1/4 37 1/ IX1-30RT /4 43 1/ AX1-32RT 35 1/4 40 1/ IX1-32RT /4 45 1/ AX1-34RT 37 1/4 42 1/ IX1-34RT /4 47 1/ AX1-36RT 39 1/4 44 1/ IX1-36RT 60 Security himneys

61 Thimbles Roof/Floor Thimble (RT) continued Used when pipe passes through a combustible roof / floor structure to reduce clearances to combustibles. The RT allows for pipe expansion and contraction the roof. See installation instructions for hole opening for the right clearance of each diameter and other specifications. = 0. NOTE: NOT AVAILABLE FOR MODELS SL AND IX3Z. For AX1, IX1, IX2, and IX4: One (1) Roof / Floor Thimble only 10 B A D 5 Total A - Plate s Hole Material options (all): Galvalume B - Wall IX2 (2" Wool Insulated) - Roof Square opening dimensions D - Square Plate dimension Product ode A - Plate s Hole B - Wall IX4 (4" Wool Insulated) - Roof Square opening dimensions D - Square Plate dimension Product ode 10 1/4 10 1/ IX2-5RT 14 1/4 14 1/ IX4-5RT /4 11 1/ IX2-6RT 15 1/4 15 1/ IX4-6RT /4 12 1/ IX2-7RT 16 1/4 16 1/ IX4-7RT /4 13 1/ IX2-8RT 17 1/4 17 1/ IX4-8RT /4 14 1/ IX2-9RT 18 1/4 18 1/ IX4-9RT /4 15 1/ IX2-10RT 19 1/4 19 1/ IX4-10RT /4 16 1/ IX2-11RT 20 1/4 20 1/ IX4-11RT /4 17 1/ IX2-12RT 21 1/4 21 1/ IX4-12RT /4 18 1/ IX2-13RT 22 1/4 22 1/ IX4-13RT /4 19 1/ IX2-14RT 23 1/4 23 1/ IX4-14RT /4 23 1/ IX2-16RT 25 1/4 27 1/ IX4-16RT /4 25 1/ IX2-18RT 27 1/4 29 1/ IX4-18RT /4 27 1/ IX2-20RT 29 1/4 31 1/ IX4-20RT /4 29 1/ IX2-22RT 31 1/4 33 1/ IX4-22RT /4 31 1/ IX2-24RT 33 1/4 35 1/ IX4-24RT /4 33 1/ IX2-26RT 35 1/4 37 1/ IX4-26RT /4 35 1/ IX2-28RT 37 1/4 39 1/ IX4-28RT /4 37 1/ IX2-30RT 39 1/4 41 1/ IX4-30RT /4 40 1/ IX2-32RT 41 1/4 44 1/ IX4-32RT /4 42 1/ IX2-34RT 43 1/4 46 1/ IX4-34RT /4 44 1/ IX2-36RT 45 1/4 48 1/ IX4-36RT (US) (anada) 61

62 Thimbles Wall Thimble (WT) Used when pipe passes through a combustible wall structure to reduce clearances to combustibles. The WT allows for pipe expansion and contraction of the roof. The part consists of a wall thimble female half and a male wall thimble half that slide in each other to adjust wall thickness from 8 to 12. See installation instructions for hole opening for the right clearance for each models and other specifications. = 0. NOTE: NOT AVAILABLE FOR MODELS SL AND IX3Z. B A 8" to 12" D For AX1, IX1, IX2, and IX4: One (1) wall thimble female half, and one (1) wall thimble male half. 5 Total A - Plate s Hole B - Female Wall AX1 (1" Air Insulated) - Male Wall D - Square Plate dimension Product ode A - Plate s Hole B - Female Wall IX1 (1" Wool Insulated) - Male Wall D - Square Plate dimension Product ode 8 1/ /32 18 AX1-5WT 8 1/4 8 1/2 8 13/32 12 IX1-5WT 6 9 1/ /32 19 AX1-6WT 9 1/4 9 1/2 9 13/32 13 IX1-6WT / /32 22 AX1-7WT 10 1/ /32 16 IX1-7WT / /32 23 AX1-8WT 11 1/ /32 17 IX1-8WT / /32 24 AX1-9WT 12 1/ /32 18 IX1-9WT / /32 25 AX1-10WT 13 1/ /32 19 IX1-10WT / /32 26 AX1-11WT 14 1/ /32 20 IX1-11WT / /32 27 AX1-12WT 15 1/ /32 21 IX1-12WT / /32 28 AX1-13WT 16 1/ /32 22 IX1-13WT / /32 29 AX1-14WT 17 1/ /32 23 IX1-14WT 16 8 to / /32 33 AX1-16WT 19 1/ /32 27 IX1-16WT / /32 35 AX1-18WT 21 1/ /32 29 IX1-18WT / /32 37 AX1-20WT 23 1/ /32 31 IX1-20WT / /32 39 AX1-22WT 25 1/ /32 33 IX1-22WT / /32 43 AX1-24WT 27 1/ /32 37 IX1-24WT / /32 45 AX1-26WT 29 1/ /32 39 IX1-26WT / /32 47 AX1-28WT 31 1/ /32 41 IX1-28WT / /32 49 AX1-30WT 33 1/ /32 43 IX1-30WT / /32 53 AX1-32WT 35 1/ /32 47 IX1-32WT / /32 55 AX1-34WT 37 1/ /32 49 IX1-34WT / /32 57 AX1-36WT 39 1/ /32 51 IX1-36WT Material options (all): Galvalume 62 Security himneys

63 Thimbles Wall Thimble (WT) continued Used when pipe passes through a combustible wall structure to reduce clearances to combustibles. The WT allows for pipe expansion and contraction of the roof. The part consists of a wall thimble female half and a male wall thimble half that slide in each other to adjust wall thickness from 8 to 12. See installation instructions for hole opening for the right clearance for each models and other specifications. = 0. NOTE: NOT AVAILABLE FOR MODELS SL AND IX3Z. B A 8" to 12" D For AX1, IX1, IX2, and IX4: One (1) wall thimble female half, and one (1) wall thimble male half. 5 Total A - Plate s Hole B - Female Wall IX2 (2" Wool Insulated) - Male Wall D - Square Plate dimension Product ode A - Plate s Hole B - Female Wall IX4 (4" Wool Insulated) - Male Wall D - Square Plate dimension Product ode 10 1/4 10 1/4 10 5/32 14 IX2-5WT 14 1/4 14 1/4 14 5/32 18 IX4-5WT /4 11 1/4 11 5/32 15 IX2-6WT 15 1/4 15 1/4 15 5/32 19 IX4-6WT /4 12 1/4 12 5/32 16 IX2-7WT 16 1/4 16 1/4 16 5/32 20 IX4-7WT /4 13 1/4 13 5/32 17 IX2-8WT 17 1/4 17 1/4 17 5/32 21 IX4-8WT /4 14 1/4 14 5/32 18 IX2-9WT 18 1/4 18 1/4 18 5/32 22 IX4-9WT /4 15 1/4 15 5/32 19 IX2-10WT 19 1/4 19 1/4 19 5/32 23 IX4-10WT /4 16 1/4 16 5/32 20 IX2-11WT 20 1/4 20 1/4 20 5/32 24 IX4-11WT /4 17 1/4 17 5/32 21 IX2-12WT 21 1/4 21 1/4 21 5/32 25 IX4-12WT /4 18 1/4 18 5/32 22 IX2-13WT 22 1/4 22 1/4 22 5/32 26 IX4-13WT /4 19 1/4 19 5/32 23 IX2-14WT 23 1/4 23 1/4 23 5/32 27 IX4-14WT 16 8 to / /32 27 IX2-16WT 25 1/ /32 31 IX4-16WT / /32 29 IX2-18WT 27 1/ /32 33 IX4-18WT / /32 31 IX2-20WT 29 1/ /32 35 IX4-20WT / /32 33 IX2-22WT 31 1/ /32 37 IX4-22WT / /32 35 IX2-24WT 33 1/ /32 39 IX4-24WT / /32 37 IX2-26WT 35 1/ /32 41 IX4-26WT / /32 39 IX2-28WT 37 1/ /32 43 IX4-28WT / /32 41 IX2-30WT 39 1/ /32 45 IX4-30WT / /32 45 IX2-32WT 41 1/ /32 49 IX4-32WT / /32 47 IX2-34WT 43 1/ /32 51 IX4-34WT / /32 49 IX2-36WT 45 1/ /32 53 IX4-36WT Material options (all): Galvalume (US) (anada) 63

64 Flashings Flashing (F) Used in conjunction with Storm ollar (S), included, for weatherization at the roof. There are 1 spacers on the top of the flashing to make sure there is an air gap between the Flashing and the outer wall of a section. For SL, AX1, IX1, IX2, and IX4, AND IX3Z: One (1) Storm ollar (S), and harware included. 12 A B 5 Total A B SL (Single Wall) AX1 (1" Air Insulated) IX1 (1" Wool Insulated) Product ode A B Product ode A B Product ode 7 3/ /16 16 SL5F 9 3/ /8 34 AX1-5F 9 3/ /8 28 IX1-5F 6 8 3/ /16 16 SL6F 10 3/ /8 35 AX1-6F 10 3/ /8 29 IX1-6F 7 9 3/ SL7F 11 3/ /8 36 AX1-7F 11 3/ /8 30 IX1-7F / SL8F 12 3/ /8 37 AX1-8F 12 3/ /8 31 IX1-8F / SL9F 13 3/ /8 38 AX1-9F 13 3/ /8 32 IX1-9F / /8 28 SL10F 14 3/ /8 41 AX1-10F 14 3/ /8 35 IX1-10F / /8 30 SL11F 15 3/ /8 42 AX1-11F 15 3/ /8 36 IX1-11F / /8 30 SL12F 16 3/ /8 43 AX1-12F 16 3/ /8 37 IX1-12F / SL13F 17 3/ /8 44 AX1-13F 17 3/ /8 38 IX1-13F / SL14F 18 3/ /8 45 AX1-14F 18 3/ /8 39 IX1-14F / /8 34 SL16F 20 3/ /8 47 AX1-16F 20 3/ /8 41 IX1-16F / /8 36 SL18F 22 3/ /8 51 AX1-18F 22 3/ /8 45 IX1-18F / /8 38 SL20F 24 3/ /8 53 AX1-20F 24 3/ /8 47 IX1-20F / /8 40 SL22F 26 3/ /8 55 AX1-22F 26 3/ /8 49 IX1-22F / /8 42 SL24F 28 3/ /8 57 AX1-24F 28 3/ /8 51 IX1-24F / /8 44 SL26F 30 3/ /8 61 AX1-26F 30 3/ /8 55 IX1-26F / /8 46 SL28F 32 3/ /8 63 AX1-28F 32 3/ /8 57 IX1-28F / /8 48 SL30F 34 3/ /8 65 AX1-30F 34 3/ /8 59 IX1-30F / /8 50 SL32F 36 3/ /8 67 AX1-32F 36 3/ /8 61 IX1-32F / /8 52 SL34F 38 3/ /8 71 AX1-34F 38 3/ /8 65 IX1-34F / /8 54 SL36F 40 3/ /8 73 AX1-36F 40 3/ /8 67 IX1-36F Material options (all): 304, Galvalume 64 Security himneys

65 Flashings Flashing (F) continued Used in conjunction with Storm ollar (S), included, for weatherization at the roof. There are 1 spacers on the top of the flashing to make sure there is an air gap between the Flashing and the outer wall of a section. For SL, AX1, IX1, IX2, and IX4, and IX3Z: One (1) Storm ollar (S), and harware included. 12 A B 5 Total A Material options (all): 304, Galvalume IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) B Product ode A B Product ode A B Product ode 11 3/ /8 30 IX2-5F 15 3/ /8 34 IX4-5F 13 3/ /8 30 IX3Z-5F / /8 31 IX2-6F 16 3/ /8 35 IX4-6F 14 3/ /8 30 IX3Z-6F / /8 32 IX2-7F 17 3/ /8 36 IX4-7F 15 3/ IX3Z-7F / /8 33 IX2-8F 18 3/ /8 37 IX4-8F 16 3/ IX3Z-8F / /8 34 IX2-9F 19 3/ /8 38 IX4-9F 17 3/ /8 34 IX3Z-9F / /8 35 IX2-10F 20 3/ /8 39 IX4-10F 18 3/ /8 34 IX3Z-10F / /8 36 IX2-11F 21 3/ /8 40 IX4-11F 19 3/ /8 36 IX3Z-11F / /8 37 IX2-12F 22 3/ /8 41 IX4-12F 20 3/ /8 36 IX3Z-12F / /8 38 IX2-13F 23 3/ /8 42 IX4-13F 21 3/ /8 38 IX3Z-13F / /8 39 IX2-14F 24 3/ /8 43 IX4-14F 22 3/ /8 38 IX3Z-14F / /8 41 IX2-16F 26 3/ /8 45 IX4-16F 24 3/ /8 40 IX3Z-16F / /8 43 IX2-18F 28 3/ /8 47 IX4-18F 26 3/ /8 42 IX3Z-18F / /8 45 IX2-20F 30 3/ /8 49 IX4-20F 28 3/ /8 44 IX3Z-20F / /8 49 IX2-22F 32 3/ /8 53 IX4-22F 30 3/ /8 46 IX3Z-22F / /8 51 IX2-24F 34 3/ /8 55 IX4-24F 32 3/ /8 48 IX3Z-24F / /8 53 IX2-26F 36 3/ /8 57 IX4-26F 34 3/ /8 50 IX3Z-26F / /8 55 IX2-28F 38 3/ /8 59 IX4-28F 36 3/ /8 52 IX3Z-28F / /8 57 IX2-30F 40 3/ /8 61 IX4-30F 38 3/ /8 54 IX3Z-30F / /8 59 IX2-32F 42 3/ /8 63 IX4-32F 40 3/ /8 56 IX3Z-32F / /8 61 IX2-34F 44 3/ /8 65 IX4-34F 42 3/ /8 58 IX3Z-34F / /8 63 IX2-36F 46 3/ /8 67 IX4-36F 44 3/ /8 60 IX3Z-36F (US) (anada) 65

66 Flashings Adjustable Flashing (F30) Used in conjunction with Storm ollar (S), included, for weatherization at the roof. There are 1 spacers on the top of the flashing to make sure there is an air gap between the Flashing and the outer wall of a section. 5 to 30 (1/12 to 7/12) pitch. For SL, AX1, IX1, IX2, and IX4, and IX3Z: One (1) Storm ollar (S), and harware included. A B A B SL (Single Wall) AX1 ("1 Air Insulated) IX1 (1" Wool Insulated) - Total height Product ode A B - Total height Product ode A B - Total height Product ode 5 7 7/ /8 12 7/32 SL5F30 9 3/ /4 12 AX1-5F30 9 3/ /32 12 IX1-5F / / /32 SL6F / /32 12 AX1-6F / /16 12 IX1-6F / / /32 SL7F / /16 12 AX1-7F / /32 12 IX1-7F / / /16 SL8F / /32 12 AX1-8F / /8 12 IX1-8F / /8 12 7/16 SL9F / /8 12 AX1-9F / /32 12 IX1-9F /8 24 1/2 12 7/16 SL10F / AX1-10F / /32 12 IX1-10F / / /32 SL11F / /32 12 AX1-11F / /16 12 IX1-11F / /8 12 7/16 SL12F / /16 12 AX1-12F / /32 12 IX1-12F / /8 12 7/16 SL13F / /32 12 AX1-13F / /8 12 IX1-13F /4 28 7/8 12 7/16 SL14F / /8 12 AX1-14F / /32 12 IX1-14F / /16 SL16F / /16 12 AX1-16F / IX1-16F / /8 12 7/16 SL18F / / /8 AX1-18F / /8 12 IX1-18F / /4 12 7/16 SL20F / / /32 AX1-20F / /16 12 IX1-20F / /8 12 7/16 SL22F / / /32 AX1-22F / /32 12 IX1-22F /8 39 1/2 12 7/16 SL24F / / /32 AX1-24F / /32 12 IX1-24F / /8 12 7/16 SL26F / / /32 AX1-26F / /32 12 IX1-26F /4 43 3/4 12 7/16 SL28F / /4 15 5/32 AX1-28F / /16 12 IX1-28F / / /16 SL30F / / /16 AX1-30F / /8 12 IX1-30F / / /16 SL32F / / /16 AX1-32F / /16 12 IX1-32F / / /32 SL34F / / /16 AX1-34F / / /32 IX1-34F / / /32 SL36F / /8 17 7/16 AX1-36F / / /4 IX1-36F30 Material options (collar): 304, Galvalume 66 Security himneys

67 Flashings Adjustable Flashing (F30) Used in conjunction with Storm ollar (S), included, for weatherization at the roof. There are 1 spacers on the top of the flashing to make sure there is an air gap between the Flashing and the outer wall of a section. 5 to 30 (1/12 to 7/12) pitch. For SL, AX1, IX1, IX2, and IX4, and IX3Z: One (1) Storm ollar (S), and harware included. A B A IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) B - Total height Product ode A B - Total height Product ode A B - Total height Product ode / / /16 IX2-5F / /4 12 7/16 IX4-5F / / /32 IX3Z-5F / /8 12 7/16 IX2-6F / / /16 IX4-6F / / /16 IX3Z-6F / / /16 IX2-7F / / /16 IX4-7F / /8 12 7/16 IX3Z-7F / / /16 IX2-8F / / /16 IX4-8F / / /16 IX3Z-8F / /4 12 7/16 IX2-9F / /8 12 7/16 IX4-9F / / /16 IX3Z-9F / / /16 IX2-10F / / /16 IX4-10F / / /16 IX3Z-10F / / /16 IX2-11F / / /16 IX4-11F / / /16 IX3Z-11F / / /16 IX2-12F / /16 IX4-12F / /16 IX3Z-12F / /8 12 7/16 IX2-13F / / /16 IX4-13F / / /16 IX3Z-13F / / /16 IX2-14F / / /16 IX4-14F / / /16 IX3Z-14F / /16 IX2-16F / /8 12 7/16 IX4-16F / / /16 IX3Z-16F / / /16 IX2-18F / / /16 IX4-18F /8 39 7/ /16 IX3Z-18F / /8 12 7/16 IX2-20F / / /16 IX4-20F / / /16 IX3Z-20F / / /16 IX2-22F / / /16 IX4-22F /4 43 3/4 12 7/16 IX3Z-22F / / /16 IX2-24F / / /16 IX4-24F / / /16 IX3Z-24F / / /16 IX2-26F / / /16 IX4-26F / / /16 IX3Z-26F / / /16 IX2-28F / /8 12 7/16 IX4-28F / / /32 IX3Z-28F / / /16 IX2-30F / / /32 IX4-30F / / /32 IX3Z-30F / /8 12 7/16 IX2-32F / /4 14 1/2 IX4-32F / / /32 IX3Z-32F / / /32 IX2-34F / / /4 IX4-34F / / /32 IX3Z-34F / /4 14 3/8 IX2-36F / / /16 IX4-36F /4 60 3/ /32 IX3Z-36F30 Material options (collar): 304, Galvalume Storm ollar (S) Used above the Flashing or the Adjustable Flashing for complete weatherization above the roof. To be sealed with outer joint sealant (S-375) (not included). For SL, AX1, IX1, IX2, and IX4, and IX3Z: Hardware for the collar. 6 1/4 A B Total A B SL (Single Wall) Product ode A B AX1 (1" Air Insulated) - IX1 (1" Wool Insulated) Product ode Product ode 5 to /4-1/ /16 SLS / /16 AX1-S IX1-S Total A Material options (all): 304, Galvalume IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) B Product ode A B Product ode A B Product ode 5 to / / /16 IX2-S / /16 IX4-S / /16 IX3Z-S (US) (anada) 67

68 Terminations Finishing one (F) Used at the top of the chimney and protects the chimney against water infiltration in the insulation between the inner and outer wall of the chimney. The inner flue is straight all the way. A Drain Tee ap (DT) at the base of the chimney or a Drain (DL) in the vertical run is required for use of a Finishing one (F). NOTE: NOT AVAILABLE FOR MODEL IX3Z For SL: One (1) Locking Inner "V" Band (BSI), and one (1) entering Flue Extension (PR-0794). For AX1: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), and one (1) Outer Band (BSE). For IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) 6 insulation band, and one (1) Outer Band (BSE). EFFETIVE LENGTH 5 to /2 10 to /2 16 to /2 24 to /2 30 to / /2 Product ode SL (Single Wall) AX1 (1" Air Insulated) IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) SLF AX1-F IX1-F IX2-F IX4-F Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: 5 to 16: K = 0.4 (eff. length [ft] / [in]) 18 to 36: K = 0.3 (eff. length [ft] / [in]) For Engine and Turbine Exhausts: K = 0.25 (eff. length [ft] / [in]) D onic Rain ap (R) Used to provide the greatest degree of rain protection and it is a single wall part. For dable wall, a losure Ring (R) is provided to protects the insulated space between standard pipe inner and outer. Also available with bird screen (SLRB). For SL: One (1) onic Rain ap (R) only. For AX1, IX1, IX2 and IX4: One losure Ring (R). For IX3Z One (1) One losure Ring (R). B D 68 Security himneys Material options (Inner): 304, 316 Flow resistance: K = 0.5 Product ode SL (Single Wall) AX1 (1 Air Insulated) IX1 (1 Insulated) Standard With Bird Screen Standard With Bird Screen Standard With Bird Screen 5 5 1/ /2 16 SL5R SL5RB AX1-5R AX1-5RB IX1-5R IX1-5RB 6 5 7/ /8 16 SL6R SL6RB AX1-6R AX1-6RB IX1-6R IX1-6RB 7 5 3/4 12 1/8 16 SL7R SL7RB AX1-7R AX1-7RB IX1-7R IX1-7RB /8 16 SL8R SL8RB AX1-8R AX1-8RB IX1-8R IX1-8RB /8 SL9R SL9RB AX1-9R AX1-9RB IX1-9R IX1-9RB / /8 19 7/8 SL10R SL10RB AX1-10R AX1-10RB IX1-10R IX1-10RB / /4 19 7/8 SL11R SL11RB AX1-11R AX1-11RB IX1-11R IX1-11RB /8 14 5/8 24 SL12R SL12RB AX1-12R AX1-12RB IX1-12R IX1-12RB /8 14 7/8 24 SL13R SL13RB AX1-13R AX1-13RB IX1-13R IX1-13RB /2 27 3/4 SL14R SL14RB AX1-14R AX1-14RB IX1-14R IX1-14RB /4 17 1/4 27 3/4 SL16R SL16RB AX1-16R AX1-16RB IX1-16R IX1-16RB /8 17 1/4 31 1/2 SL18R SL18RB AX1-18R AX1-18RB IX1-18R IX1-18RB / /2 SL20R SL20RB AX1-20R AX1-20RB IX1-20R IX1-20RB /2 25 1/8 44 SL22R SL22RB AX1-22R AX1-22RB IX1-22R IX1-22RB /8 25 1/2 44 SL24R SL24RB AX1-24R AX1-24RB IX1-24R IX1-24RB /2 26 3/16 44 SL26R SL26RB AX1-26R AX1-26RB IX1-26R IX1-26RB /4 30 7/8 56 SL28R SL28RB AX1-28R AX1-28RB IX1-28R IX1-28RB /8 31 9/16 56 SL30R SL30RB AX1-30R AX1-30RB IX1-30R IX1-30RB /4 31 1/4 60 SL32R SL32RB AX1-32R AX1-32RB IX1-32R IX1-32RB /8 31 7/8 60 SL34R SL34RB AX1-34R AX1-34RB IX1-34R IX1-34RB /2 32 1/2 60 SL36R SL36RB AX1-36R AX1-36RB IX1-36R IX1-36RB 4 3/8 B

69 Terminations onic Rain ap (R) continued Used to provide the greatest degree of rain protection and it is a single wall part. For dable wall, a losure Ring (R) is provided to protects the insulated space between standard pipe inner and outer. Also available with bird screen (SLRB). For SL: One (1) onic Rain ap (R) only. For AX1, IX1, IX2 and IX4: One losure Ring (R). For IX3Z One (1) One losure Ring (R). D 4 3/8 B B Material options (Inner): 304, 316 Flow resistance: K = 0.5 D Product ode IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) Standard With Bird Screen Standard With Bird Screen Standard With Bird Screen 5 5 1/ /2 16 IX2-5R IX2-5RB IX4-5R IX4-5RB IX3Z-5R IX3Z-5RB 6 5 7/ /8 16 IX2-6R IX2-6RB IX4-6R IX4-6RB IX3Z-6R IX3Z-6RB 7 5 3/4 12 1/8 16 IX2-7R IX2-7RB IX4-7R IX4-7RB IX3Z-7R IX3Z-7RB /8 16 IX2-8R IX2-8RB IX4-8R IX4-8RB IX3Z-8R IX3Z-8RB /8 IX2-9R IX2-9RB IX4-9R IX4-9RB IX3Z-9R IX3Z-9RB / /8 19 7/8 IX2-10R IX2-10RB IX4-10R IX4-10RB IX3Z-10R IX3Z-10RB / /4 19 7/8 IX2-11R IX2-11RB IX4-11R IX4-11RB IX3Z-11R IX3Z-11RB /8 14 5/8 24 IX2-12R IX2-12RB IX4-12R IX4-12RB IX3Z-12R IX3Z-12RB /8 14 7/8 24 IX2-13R IX2-13RB IX4-13R IX4-13RB IX3Z-13R IX3Z-13RB /2 27 3/4 IX2-14R IX2-14RB IX4-14R IX4-14RB IX3Z-14R IX3Z-14RB /4 17 1/4 27 3/4 IX2-16R IX2-16RB IX4-16R IX4-16RB IX3Z-16R IX3Z-16RB /8 17 1/4 31 1/2 IX2-18R IX2-18RB IX4-18R IX4-18RB IX3Z-18R IX3Z-18RB / /2 IX2-20R IX2-20RB IX4-20R IX4-20RB IX3Z-20R IX3Z-20RB /2 25 1/8 44 IX2-22R IX2-22RB IX4-22R IX4-22RB IX3Z-22R IX3Z-22RB /8 25 1/2 44 IX2-24R IX2-24RB IX4-24R IX4-24RB IX3Z-24R IX3Z-24RB /2 26 3/16 44 IX2-26R IX2-26RB IX4-26R IX4-26RB IX3Z-26R IX3Z-26RB /4 30 7/8 56 IX2-28R IX2-28RB IX4-28R IX4-28RB IX3Z-28R IX3Z-28RB /8 31 9/16 56 IX2-30R IX2-30RB IX4-30R IX4-30RB IX3Z-30R IX3Z-30RB /4 31 1/4 60 IX2-32R IX2-32RB IX4-32R IX4-32RB IX3Z-32R IX3Z-32RB /8 31 7/8 60 IX2-34R IX2-34RB IX4-34R IX4-34RB IX3Z-34R IX3Z-34RB /2 32 1/2 60 IX2-36R IX2-36RB IX4-36R IX4-36RB IX3Z-36R IX3Z-36RB (US) (anada) 69

70 Terminations No Loss ap (NL) Used to provide a low-loss termination on vertical run when the chimney is installed at a location subject to high wind condition and need protecting to the equipement from the rain. It allows your equipment to operate as efficiently as possible and the exhaust to blast unhindered straight up with full velocity. As per the AGIH: Industrial Ventilation Manual, 23rd edition (1998), the outer wall must have a diameter of flue + 2, overlap the inner wall by 6, be separated from the inner wall with 1 spacers, and have a height of four (4) times the flue. NOTE: NOT AVAILABLE FOR MODEL IX3Z Two different designs for the R: 5 to 13: An inner flue with an outer wall connected on it. 14 to 36: An inner flue with 1 spacers connected on it, different number of SL sections of + 2, working as outer wall, making a total height of 4 times the flue, whose are mounted on an Anchor Plate (AP) when it has 6 overlap, placed. See Installation Instructions for more information. Included for 5 to 13: For SL: One (1) No Loss ap (NL) only. For AX1, IX1, IX2, and IX4: One (1) losure Ring (R). Included for 14 to 36: For SL: One (1) inner wall with brackets on it, one (1) locking inner V-Band, one (1) Anchor Plate (AP), diffferent numbers and lengths of SL section of + 2 with their inner V-Band (BSI of + 2), and one (1) losure Ring (R). For AX1, IX1, IX2 and IX4: One (1) inner wall with brackets on it, one (1) locking inner V-Band (BSI), one (1) Anchor Plate (AP), diffferent numbers and lengths of SL section of + 2 with their inner V-Band (BSI of + 2), and one (1) losure Ring (R) " to 13" 4 x 5 1/2 EFFETIVE LENGTH /4 14" to 36" 4 x EFFETIVE LENGTH B D - SL (Single Wall) AX1 (1 Air Insulated) Product ode IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) 5 to x (4 x ) + 5 1/2 SLNL AX1-NL IX1-NL IX2-NL IX4-NL Material options (Inner-Outer): Flip Top (FT) Used mostly in vertical diesel or turbine exhaust, it prevents moisture and debris from entering the system. It can also be used on horizontal run when properly installed. It opens with internal pressure and closes when no pressure. It is a single wall part (for all Models SL, AX1, IX1, IX2, and IX4). For AX1, IX1, IX2, and IX4, a losure Ring (R) is provided to protect the insulated space between standard pipe inner and outer. B EFFETIVE LENGTH NOTE: NOT AVAILABLE FOR MODEL IX3Z One (1) Flip Top (FT) only. For SL: Nothing else. For AX1, IX1, IX2, and IX4: One (1) losure Ring (R). B Product ode SL (Single Wall) AX1 (1 Air Insulated) IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) 5 to 7 5 1/8 8 to /8 11 to / /8 8 1/8 16 to /8 20 to / /8 SLFT AX1-FT IX1-FT IX2-FT IX4-FT Material options (Inner-Outer): Security himneys

71 Terminations Miter ut (M) Used in horizontal diesel or turbine exhaust to minimize the entry of rainwater in the system when installed in the proper orientation. For SL, OAX1, IX1, IX2, and IX4, and IX3Z: One (1) Miter ut (M) only, One (1) birdscreen at the end. 3 - Product ode SL (Single Wall) AX1 ("1 Air Insulated) IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) /32 SL5M AX1-5M IX1-5M IX2-5M IX4-5M IX3Z-5M /4 SL6M AX1-6M IX1-6M IX2-6M IX4-6M IX3Z-6M /8 SL7M AX1-7M IX1-7M IX2-7M IX4-7M IX3Z-7M /32 SL8M AX1-8M IX1-8M IX2-8M IX4-8M IX3Z-8M /16 SL9M AX1-9M IX1-9M IX2-9M IX4-9M IX3Z-9M /32 SL10M AX1-10M IX1-10M IX2-10M IX4-10M IX3Z-10M /4 SL11M AX1-11M IX1-11M IX2-11M IX4-11M IX3Z-11M /8 SL12M AX1-12M IX1-12M IX2-12M IX4-12M IX3Z-12M /32 SL13M AX1-13M IX1-13M IX2-13M IX4-13M IX3Z-13M /16 SL14M AX1-14M IX1-14M IX2-14M IX4-14M IX3Z-14M /4 SL16M AX1-16M IX1-16M IX2-16M IX4-16M IX3Z-16M /32 SL18M AX1-18M IX1-18M IX2-18M IX4-18M IX3Z-18M /32 SL20M AX1-20M IX1-20M IX2-20M IX4-20M IX3Z-20M /8 SL22M AX1-22M IX1-22M IX2-22M IX4-22M IX3Z-22M /16 SL24M AX1-24M IX1-24M IX2-24M IX4-24M IX3Z-24M /4 SL26M AX1-26M IX1-26M IX2-26M IX4-26M IX3Z-26M /32 SL28M AX1-28M IX1-28M IX2-28M IX4-28M IX3Z-28M /32 SL30M AX1-30M IX1-30M IX2-30M IX4-30M IX3Z-30M /8 SL32M AX1-32M IX1-32M IX2-32M IX4-32M IX3Z-32M /16 SL34M AX1-34M IX1-34M IX2-34M IX4-34M IX3Z-34M /4 SL36M AX1-36M IX1-36M IX2-36M IX4-36M IX3Z-36M Material options (Inner-Outer): 304-Galvalume, , 316-Galvalume, Flow resistance: K = (US) (anada) 71

72 Joint Assembly - Replacement Parts Locking Inner "V" Band (BSI) Used to clamp and seal parts together. To be sealed with joint sealant (not included). For SL, IX1, IX2, and IX4: Two (2) half band, and hardware. For IX3Z: Two (2) half band, and hardware. Total SL (Single Wall) AX1 (1" air) IX1 (1" Insulated) Product ode IX2 (2" Insulated) IX4 (4" Insulated) IX3Z (3" Insulated) 5 to /8 0 SLBSI AX1-BSI IX1-BSI IX2-BSI IX4-BSI IX3Z-BSI Materials available: /8 + 1 Outer Band (BSE) Used to seal outer casing at each joint. When then (BSE) is exposed to weather, sealant S-375 (by others) must be used to seal every joint. NOTE: NOT AVAILABLE FOR MODEL SL For AX1 and IX1, IX2, and IX4: Two (2) half band (small diameter) or one (1) band (for large diameter). For IX1, IX2, and IX4 only: Two (2) half band (small diameter) or (1) band (larger diameter), and one (1) 6 wide insulation strip, and hardware. For IX3Z: Two (2) half band (small diameter) or one (1) band (for large diameter). 5 3/8 of band Total AX1 (1" air) IX1 (1" Insulated) Product ode IX2 (2" Insulated) IX4 (4" Insulated) IX3Z (3" Insulated) 5 to 36 O.D. + 3/4 5 3/8 0 AX1-BSE IX1-BSE IX2-BSE IX4-BSE IX3Z-BSE O.D. + 3/4 Materials available: 441. entering Flue Extension (PR-0794) Unattached sleeve used for centering parts together while assembling. NOTE: NOT AVAILABLE FOR MODEL SL For AX1 and IX1, IX2, and IX4, and IX3Z: One (1) Sleeve. Half Outer Band (DBSE) Used to seal outer casing when using Anchor Plate (AP), an Heavy Duty Wall Support (WSHD), Half Universal Flange Adaptors (HUF). Half height of the BSE. Need one (1) band on each side of the plates. NOTE: NOT AVAILABLE FOR MODEL SL of sleeve For AX1 and IX1, IX2, and IX4: Two (2) half band (small diameter) or one (1) band (for large diameter), and hardware. For IX1, IX2, and IX4 only: Two (2) half band (small diameter) or (1) band (larger diameter), and one (1) 3 wide insulation strip. For IX3Z: Two half bands (small diameter) or one band (for large diameter), One 3" wide insulation strip and hardware. of band Total Total AX1 (1" air) 72 Security himneys IX1 (1" Insulated) Product ode AX1 (1" air), IX1 (1" Insulated), IX2 (2" Insulated), IX4 (4" Insulated). IX3Z (3" Insulated) 5 to 36-1/8-1/8 0 PR Materials available: 441. Product ode IX2 (2" Insulated) IX4 (4" Insulated) IX3Z (3" Insulated) 5 to 36 O.D. + 3/4 2 11/16 0 AX1-DBSE IX1-DBSE IX2-DBSE IX4-BSE IX3Z-BSE Materials available: /8 2 11/16-1/8 O.D. + 3/4

73 Joint Assembly - Replacement Parts Duct losure Band (R) Use to shield insulation from weather for some Single Wall Termination (onic Rain ap, No loss ap, Flip Top) or when transition from AX1, IX1, IX2, IX4 to SL on vertical run. Hardware provided. NOTE: NOT AVAILABLE FOR MODEL SL For AX1, IX1, IX2, and IX4: One (1) collar and hardware. For IX3Z: One (1) half band and hardware. A B Total AX1 (1" air) IX1 (1" Insulated) Product ode IX2 (2" Insulated) IX4 (4" Insulated) IX3Z (3" Insulated) 5 to /16 O.D AX1-R IX1-R IX2-R IX4-R IX3Z-R Materials available: Galvalume, 304 O.D. + 4" 7 Transition Outer Band (O.D. from one lineup to another) Used to shield insulation on vertical or horizontal run when there is a transition from any product lineup to another one. Each product can be used on both ways: to convert up to a larger outer wall, or to convert up to a smaller outer wall. For SL, AX1, IX1, IX2, and IX4: Two (2) half bands with half disc, and hardware. of band Total 5 to 36 O.D. + 3/4 5 3/8 0 Materials available: 441. One (1) lineup gap (O.D. + 2 or O.D. - 2) SLAX1 AX1-IX2 IX1-IX2 Two (2) lineup gap (O.D. + 4 or O.D. - 4) SLIX2 IX2-IX4 Product ode Three (3) lineup gap (O.D. + 6 or O.D. - 6) AX1-IX4 IX1-IX4 Four (4) lineup gap (O.D. + 8 or O.D. - 8) SLIX4 5 3/8 + 3/4 Sealant The S-375 grey sealant is used if any joints of any bands are exposed to weather, or on other parts that are external the structure and need to be sealed. The S-650 red sealant is used for Flange to Flange Joint Assembly for a maximum continuous flue temperature of 650 F. The S-2000 white sealant is used for Flange to Flange Joint Assembly for a maximum continuous flue temperature of 2000 F. S-2000 S-650 S-375 Flue Diameter Expected number of tubes per joint/hole for each sealant S-375 (Tube per outer Joint for exterior weathering) S-650 and S-2000 (Tube per Joint Assembly) 5 1/5 1/5 6 1/5 1/5 7 1/5 1/5 8 1/5 1/5 9 1/5 1/5 10 1/5 1/5 11 1/4 1/4 12 1/4 1/4 13 1/4 1/4 14 1/4 1/4 16 1/4 1/4 18 1/3 1/3 20 1/3 1/3 22 1/3 1/3 24 1/2 1/2 26 1/2 1/2 28 1/2 1/2 30 2/3 2/3 32 2/3 2/3 34 3/4 3/4 36 3/4 3/ (US) (anada) 73

74 Grease Duct Accessories No Tool Inline Access Door Used for inspection and cleaning. Greaseproof and fire-tight seal. For SL: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) fiber high temperature gasket, one (1) silicone gasket, one (1) inner door, and hardware (wing screws) for the access door. Replacement gaskets available For AX1, IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794), one (1) locking outer band (BSE), one (1) fiber high temperature gasket, one (1) silicone gasket, one (1) inner door, one (1) outer door and hardware (wing screws) for both access doors. For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR- 0794), one (1) locking outer band (BSE), one (1) fiber high temperature gasket, one (1) silicone gasket, one (1) inner door, one (1) outer door and hardware (wing screws) for both access doors. SL (Single Wall) Materials available: 304, 316. Flow resistance: K =.30 (eff.length [ft] / [in]). AX1 (1 Air Insulated) IX1 (1 Insulated) Product ode IX2 (2 Insulated) IX4 (4 Insulated) IX3Z (3 Insulated) 5 to /8 SLADL26 AX1-ADL26 IX1-ADL26 IX2-ADL26 IX4-ADL26 IX3Z-ADL26 5 to /16 SLADL36 AX1-ADL36 IX1-ADL36 IX2-ADL36 IX4-ADL36 IX3Z-ADL36 L 12 Through Penetration Firestop Kit Used to maintain fire resistance rating of a floor or a wall when the grease duct IX3Z is penetrating a 2-hour fire-rated floor or wall (UL System No. -AJ-7160). One kit required for a floor penetration and two kits required for wall penetrations. Diameter of penetration is outer casing + 2" ( I.D. + 8"). Must use the firestop caulking. Reference installation instructions. For IX3Z: Two (2) split closure band, two (2) split cover plate, one (1) 12" wide insulation strip, one (1) 3" wide insulation strip and Hardware included except the connection to the wall/floor (by others). A B (I.D.) Height IX3Z (3 Insulated) IX3Z-5TPFK IX3Z-6TPFK IX3Z-7TPFK IX3Z-8TPFK IX3Z-9TPFK A 12 B IX3Z-10TPFK IX3Z-11TPFK IX3Z-12TPFK IX3Z-13TPFK à 12" above floor or beyond wall IX3Z-14TPFK IX3Z-16TPFK à 4 1/2 " within floor or wall IX3Z-18TPFK IX3Z-20TPFK IX3Z-22TPFK IX3Z-24TPFK IX3Z-26TPFK IX3Z-28TPFK IX3Z-30TPFK IX3Z-32TPFK IX3Z-34TPFK IX3Z-36TPFK Materials available: Galvalume. 74 Security himneys

75 Grease Duct Accessories 90 Tees and 90 Tees with a Dam Used to change direction at 90 breeching. an be used as an inspection access in horizontal runs. An optional Dam can be ordered in position #1 or #2 for protection against fluids running out while cleaning. For SL: One (1) Locking Inner "V" Band (BSI) and one (1) entering Flue Extension (PR-0794). For AX1, IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). OFFSET OMP QTE ODE DE 1 H P01144 PA 3 K -- GU 4 L P01145 PA 6 N -- GU PA ISO900 ISO ISO901 9 P BA 10 Q -0763/3 ESP 11 P AT PA 13** DIG L B Position Dam #1 RISE _ PREMIÈRE ÉMISSION REV No. EN DESRIPTION TOLERANES GENERALES FRATION ± 1/32 XX ±.015 XXX ±.005 ANGLE ± 1 TROU ±.001 Position Dam #2 LES DIMENSIONS ENADREES DOIVENT ETRE INSPETEES RAYON DE PLIAGE:.031 V. LEMIEUX HEMI V. LEMIEUX 24/11/ TE DE 7 SL (Single Wall) Rise Standard Option D1 Or D2 Rise Standard Option D1 Or D / /32 6 1/32 SL5T90 SL5T90D / / /32 SL18T90 SL18T90D / / /32 SL6T90 SL6T90D / / /32 SL20T90 SL20T90D / /32 7 1/32 SL7T90 SL7T90D / / /32 SL22T90 SL22T90D / / /32 SL8T90 SL8T90D / / /32 SL24T90 SL24T90D / /32 8 1/32 SL9T90 SL9T90D / / /32 SL26T90 SL26T90D / / /32 SL10T90 SL10T90D / / /32 SL28T90 SL28T90D / /32 9 1/32 SL11T90 SL11T90D / / /32 SL30T90 SL30T90D / / /32 SL12T90 SL12T90D / / /32 SL32T90 SL32T90D / / /32 SL13T90 SL13T90D / / /32 SL34T90 SL34T90D / / /32 SL14T90 SL14T90D / / /32 SL36T90 SL36T90D / / /32 SL16T90 SL16T90D (US) (anada) 75

76 Grease Duct Accessories 90 Tees and 90 Tees with a Dam continued Used to change direction at 90 breeching. an be used as an inspection access in horizontal runs. An optional Dam can be ordered in position #1 or #2 for protection against fluids running out while cleaning. For SL: One (1) Locking Inner "V" Band (BSI) and one (1) entering Flue Extension (PR-0794). For AX1, IX1, IX2, and IX4: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). For IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) entering Flue Extension (PR-0794) and one (1) Locking Outer Band (BSE). Rise AX1 (1 air Insulated) Standard Option D1 Or D2 Standard IX1 (1 Insulated) Option D1 Or D2 Standard IX2 (2 Insulated) Option D1 Or D2 Standard IX4 (4 Insulated) Option D1 Or D2 Standard IX3Z (3 Insulated) Option D1 Or D / / /32 AX1-5T90 AX1-5T90D1 IX1-5T90 IX1-5T90D1 IX2-5T90 IX2-5T90D1 IX4-5T90 IX4-5T90D1 IX3Z-5T90 IX3Z-5T90D / / /32 AX1-6T90 AX1-6T90D1 IX1-6T90 IX1-6T90D1 IX2-6T90 IX2-6T90D1 IX4-6T90 IX4-6T90D1 IX3Z-6T90 IX3Z-6T90D / / /32 AX1-7T90 AX1-7T90D1 IX1-7T90 IX1-7T90D1 IX2-7T90 IX2-7T90D1 IX4-7T90 IX4-7T90D1 IX3Z-7T90 IX3Z-7T90D / / /32 AX1-8T90 AX1-8T90D1 IX1-8T90 IX1-8T90D1 IX2-8T90 IX2-8T90D1 IX4-8T90 IX4-8T90D1 IX3Z-8T90 IX3Z-8T90D / / /32 AX1-9T90 AX1-9T90D1 IX1-9T90 IX1-9T90D1 IX2-9T90 IX2-9T90D1 IX4-9T90 IX4-9T90D1 IX3Z-9T90 IX3Z-9T90D / / /32 AX1-10T90 AX1-10T90D1 IX1-10T90 IX1-10T90D1 IX2-10T90 IX2-10T90D1 IX4-10T90 IX4-10T90D1 IX3Z- 10T90 IX3Z-10T90D / / /32 AX1-11T90 AX1-11T90D1 IX1-11T90 IX1-11T90D1 IX2-11T90 IX2-11T90D1 IX4-11T90 IX4-11T90D1 IX3Z- 11T90 IX3Z-11T90D / / /32 AX1-12T90 AX1-12T90D1 IX1-12T90 IX1-12T90D1 IX2-12T90 IX2-12T90D1 IX4-12T90 IX4-12T90D1 IX3Z- 12T90 IX3Z-12T90D / / /32 AX1-13T90 AX1-13T90D1 IX1-13T90 IX1-13T90D1 IX2-13T90 IX2-13T90D1 IX4-13T90 IX4-13T90D1 IX3Z- 13T90 IX3Z-13T90D / / /32 AX1-14T90 AX1-14T90D1 IX1-14T90 IX1-14T90D1 IX2-14T90 IX2-14T90D1 IX4-14T90 IX4-14T90D1 IX3Z- 14T90 IX3Z-14T90D / / /32 AX1-16T90 AX1-16T90D1 IX1-16T90 IX1-16T90D1 IX2-16T90 IX2-16T90D1 IX4-16T90 IX4-16T90D1 IX3Z- 16T90 IX3Z-16T90D / / /32 AX1-18T90 AX1-18T90D1 IX1-18T90 IX1-18T90D1 IX2-18T90 IX2-18T90D1 IX4-18T90 IX4-18T90D1 IX3Z- 18T90 IX3Z-18T90D / / /32 AX1-20T90 AX1-20T90D1 IX1-20T90 IX1-20T90D1 IX2-20T90 IX2-20T90D1 IX4-20T90 IX4-20T90D1 IX3Z- 20T90 IX3Z-20T90D / / /32 AX1-22T90 AX1-22T90D1 IX1-22T90 IX1-22T90D1 IX2-22T90 IX2-22T90D1 IX4-22T90 IX4-22T90D1 IX3Z- 22T90 IX3Z-22T90D / / /32 AX1-24T90 AX1-24T90D1 IX1-24T90 IX1-24T90D1 IX2-24T90 IX2-24T90D1 IX4-24T90 IX4-24T90D1 IX3Z- 24T90 IX3Z-24T90D / / /32 AX1-26T90 AX1-26T90D1 IX1-26T90 IX1-26T90D1 IX2-26T90 IX2-26T90D1 IX4-26T90 IX4-26T90D1 IX3Z- 26T90 IX3Z-26T90D / / /32 AX1-28T90 AX1-28T90D1 IX1-28T90 IX1-28T90D1 IX2-28T90 IX2-28T90D1 IX4-28T90 IX4-28T90D1 IX3Z- 28T90 IX3Z-28T90D / / /32 AX1-30T90 AX1-30T90D1 IX1-30T90 IX1-30T90D1 IX2-30T90 IX2-30T90D1 IX4-30T90 IX4-30T90D1 IX3Z- 30T90 IX3Z-30T90D / / /32 AX1-32T90 AX1-32T90D1 IX1-32T90 IX1-32T90D1 IX2-32T90 IX2-32T90D1 IX4-32T90 IX4-32T90D1 IX3Z- 32T90 IX3Z-32T90D / / /32 AX1-34T90 AX1-34T90D1 IX1-34T90 IX1-34T90D1 IX2-34T90 IX2-34T90D1 IX4-34T90 IX4-34T90D1 IX3Z- 34T90 IX3Z-34T90D / / /32 AX1-36T90 AX1-36T90D1 IX1-36T90 IX1-36T90D1 IX2-36T90 IX2-36T90D1 IX4-36T90 IX4-36T90D1 IX3Z- 36T90 IX3Z-36T90D1 Also available with smaller snout B. ode: SLT90B or AX1-T90B, IX1-T90B, IX2-T90B, IX4-T90B Two different position option of a Dam inside the flue is available. ode for position 1 : SLT90D( 1) or AX1-T90D, IX1-T90D, IX2-T90D, IX4- T90D (1 ). Materials available: 304, 316. Flow resistance: K = Security himneys

77 Grease Duct Accessories 90 Tees with Nozzle OFFSET Used to change direction at 90 breeching, and provides access for installation or inspection of sprinkler head. 1" NPT nipple. For SL, AX1, IX1, IX2, and IX4: One Locking V-Band (BSI), one entering Flue Extension (PR-0794) and one Locking Outer Band (BSE). For IX3Z: One Locking V-Band (BSI), one entering Flue Extension (PR-0794) and one Locking Outer Band (BSE). L RISE B SL (Single Wall) RISE OFFSET product code RISE OFFSET AX1 (1 air Insulated) IX1 (1 Insulated) IX2 (2 Insulated) IX4 (4 Insulated) IX3Z (3" Insulated) / /32 6 1/32 SL5T90N 19 11/ / /32 AX1-5T90N IX1-5T90N IX2-5T90N IX4-5T90N IX3Z-5T90N / / /32 SL6T90N 20 11/ / /32 AX1-6T90N IX1-6T90N IX2-6T90N IX4-6T90N IX3Z-6T90N / /32 7 1/32 SL7T90N 21 11/ / /32 AX1-7T90N IX1-7T90N IX2-7T90N IX4-7T90N IX3Z-7T90N / / /32 SL8T90N 22 11/ / /32 AX1-8T90N IX1-8T90N IX2-8T90N IX4-8T90N IX3Z-8T90N / /32 8 1/32 SL9T90N 23 11/ / /32 AX1-9T90N IX1-9T90N IX2-9T90N IX4-9T90N IX3Z-9T90N / / /32 SL10T90N 24 11/ / /32 AX1-10T90N IX1-10T90N IX2-10T90N IX4-10T90N IX3Z-10T90N / /32 9 1/32 SL11T90N 25 11/ / /32 AX1-11T90N IX1-11T90N IX2-11T90N IX4-11T90N IX3Z-11T90N / / /32 SL12T90N 26 11/ / /32 AX1-12T90N IX1-12T90N IX2-12T90N IX4-12T90N IX3Z-12T90N / / /32 SL13T90N 27 11/ / /32 AX1-13T90N IX1-13T90N IX2-13T90N IX4-13T90N IX3Z-13T90N / / /32 SL14T90N 30 11/ / /32 AX1-14T90N IX1-14T90N IX2-14T90N IX4-14T90N IX3Z-14T90N / / /32 SL16T90N 32 11/ / /32 AX1-16T90N IX1-16T90N IX2-16T90N IX4-16T90N IX3Z-16T90N / / /32 SL18T90N 34 11/ / /32 AX1-18T90N IX1-18T90N IX2-18T90N IX4-18T90N IX3Z-18T90N / / /32 SL20T90N 36 11/ / /32 AX1-20T90N IX1-20T90N IX2-20T90N IX4-20T90N IX3Z-20T90N / / /32 SL22T90N 38 11/ / /32 AX1-22T90N IX1-22T90N IX2-22T90N IX4-22T90N IX3Z-22T90N / / /32 SL24T90N 40 11/ / /32 AX1-24T90N IX1-24T90N IX2-24T90N IX4-24T90N IX3Z-24T90N / / /32 SL26T90N 46 11/ / /32 AX1-26T90N IX1-26T90N IX2-26T90N IX4-26T90N IX3Z-26T90N / / /32 SL28T90N 48 11/ / /32 AX1-28T90N IX1-28T90N IX2-28T90N IX4-28T90N IX3Z-28T90N / / /32 SL30T90N 50 11/ / /32 AX1-30T90N IX1-30T90N IX2-30T90N IX4-30T90N IX3Z-30T90N / / /32 SL32T90N 52 11/ / /32 AX1-32T90N IX1-32T90N IX2-32T90N IX4-32T90N IX3Z-32T90N / / /32 SL34T90N 54 11/ / /32 AX1-34T90N IX1-34T90N IX2-34T90N IX4-34T90N IX3Z-34T90N / / /32 SL36T90N 56 11/ / /32 AX1-36T90N IX1-36T90N IX2-36T90N IX4-36T90N IX3Z-36T90N Materials available: 304, 316. Also available with smaller snout B. ode: SLT90NB or AX1-T90NB, IX1-T90NB, IX2-T90NB, IX4-T90NB Flow resistance: K = an unknown value for the sprinkler head. ontact sprinkler head manufacturer (US) (anada) 77

78 Grease Duct Accessories No Tool Access Tee ap Used to close and seal unused tee ports. Provides easy and tooless access for inspection. For SL: One (1) disc, one (1) annular disc with rivnuts, one (1) SMALL Locking Inner "V" Band (BSI), wing screws and hardware. For AX1, IX1, IX2, and IX4: One (1) disc, one (1) annular disc with rivnuts, one (1) SMALL Locking Inner "V" Band (BSI), one (1) outer casing with latches, one (1) insulation wrap, three (3) insulation disc, wing screws and hardware. For IX3Z: One (1) disc, one (1) annular disc with rivnuts, one (1) SMALL Locking Inner "V" Band (BSI), one (1) outer casing with latches, one (1) insulation wrap, three (3) insulation disc, wing screws and hardware. +3/ /4 4 3/4 Total SL (Single Wall) AX1 (1" Air Insulated) / IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) Product ode Total Product ode Total Product ode 5 to SLNTT 5 1/2 2 3/4 AX1-NTT IX1-NTT 6 1/2 3 3/4 IX2-NTT Total IX4 (4" Wool Insulated) Materials available: 304, 316 Product ode Total IX3Z (3" Wool Insulated) Product ode 5 to /2 5 3/4 IX4-NTT 7 1/2 4 3/4 IX3Z-NTT Drain Bucket Used at the base of a vertical riser as a drain reservoir and to provide cleanout access. Made of a short with a drain tee cap. 1" NPT nipple. For SL: One (1) small length plus one (1) drain Tee ap (DT). For AX1, IX1, IX2, and IX4: One (1) small length plus one (1) drain Tee ap (DT). For IX3Z: One (1) small length plus one (1) drain Tee ap (DT). 4 3/8 8 3/8 Materials available: 304, 316. SL (Single Wall) AX1 (1" Air Insulated) IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) 5 to /4 SLDB AX1-DB IX1-DB IX2-DB IX4-DB IX3Z-DB Round Flanged Hood Adaptor Used to connect the first duct section to hood. an be field welded or supplied to Hood manufacturer for installation (by others). For SL: One (1) Locking Inner "V" Band (BSI). For AX1, IX1, IX2, IX4, and IX3Z: One (1) Locking Inner "V" Band (BSI), one (1) Locking Outer Band (BSE). 2 3/4 Materials available: 304, 316. Flow resistance: K = 0.825/ SL (Single Wall) AX1 (1" Air Insulated) IX1 (1" Wool Insulated) IX2 (2" Wool Insulated) IX4 (4" Wool Insulated) IX3Z (3" Wool Insulated) 5 to /4 SLRFHA AX1-RFHA IX1-RFHA IX2-RFHA IX4-RFHA IX3Z-RFHA 78 Security himneys

79 Grease Duct Accessories Square to Round Adaptor Used to connect a round duct to a hood equipped with a square/rectangular collar or to connect to a square duct. STR s are a custom part and all requests need to go through the design group at layouts@securitychimneys.com ustom parts are non-returnable and may require extra production time. B A Grease Duct Roof / Floor Thimble Used when pipe passes through a combustible roof / floor structure to reduce clearances to combustibles. The RT allows for pipe expansion and contraction the roof. See installation instructions for hole opening for the right clearance of each diameter and other specifications. = 0. NOTE: NOT AVAILABLE FOR MODEL SL For AX1, IX1, IX2, and IX4: One (1) Roof / Floor Thimble only 10 B A D 5 Total A - Plate s Hole B - Wall AX1 (1" Air Insulated) - Roof Square opening dimensions D - Square Plate dimension Product ode A - Plate s Hole B - Wall IX1 (1" Wool Insulated) - Roof Square opening dimensions D - Square Plate dimension Product ode 8 1/4 12 1/ AX1-5GDRT 8 1/4 10 1/ IX1-5GDRT 6 9 1/4 14 1/ AX1-6GDRT 9 1/4 11 1/ IX1-6GDRT /4 15 1/ AX1-7GDRT 10 1/4 12 1/ IX1-7GDRT /4 16 1/ AX1-8GDRT 11 1/4 13 1/ IX1-8GDRT /4 17 1/ AX1-9GDRT 12 1/4 14 1/ IX1-9GDRT /4 18 1/ AX1-10GDRT 13 1/4 15 1/ IX1-10GDRT /4 19 1/ AX1-11GDRT 14 1/4 16 1/ IX1-11GDRT /4 21 1/ AX1-12GDRT 15 1/4 17 1/ IX1-12GDRT /4 22 1/ AX1-13GDRT 16 1/4 18 1/ IX1-13GDRT /4 23 1/ AX1-14GDRT 17 1/4 20 1/ IX1-14GDRT /4 25 1/ AX1-16GDRT 19 1/4 22 1/ IX1-16GDRT /4 28 1/ AX1-18GDRT 21 1/4 24 1/ IX1-18GDRT /4 30 1/ AX1-20GDRT 23 1/4 26 1/ IX1-20GDRT /4 32 1/ AX1-22GDRT 25 1/4 28 1/ IX1-22GDRT /4 35 1/ AX1-24GDRT 27 1/4 30 1/ IX1-24GDRT /4 37 1/ AX1-26GDRT 29 1/4 33 1/ IX1-26GDRT /4 39 1/ AX1-28GDRT 31 1/4 35 1/ IX1-28GDRT /4 42 1/ AX1-30GDRT 33 1/4 37 1/ IX1-30GDRT /4 44 1/ AX1-32GDRT 35 1/4 39 1/ IX1-32GDRT /4 46 1/ AX1-34GDRT 37 1/4 41 1/ IX1-34GDRT /4 49 1/ AX1-36GDRT 39 1/4 44 1/ IX1-36GDRT Material options (all): Galvalume (US) (anada) 79

80 Grease Duct Accessories Grease Duct Roof / Floor Thimble continued Used when pipe passes through a combustible roof / floor structure to reduce clearances to combustibles. The RT allows for pipe expansion and contraction the roof. See installation instructions for hole opening for the right clearance of each diameter and other specifications. = 0. NOTE: NOT AVAILABLE FOR MODEL SL For AX1, IX1, IX2, and IX4: One (1) Roof / Floor Thimble only 10 B A D 5 Total A - Plate s Hole B - Wall IX2 (2" Wool Insulated) - Roof Square opening dimensions D - Square Plate dimension Product ode A - Plate s Hole B - Wall IX4 (4" Wool Insulated) - Roof Square opening dimensions D - Square Plate dimension Product ode 10 1/4 10 1/ IX2-5GDRT 14 1/4 14 1/ IX4-5GDRT /4 11 1/ IX2-6GDRT 15 1/4 15 1/ IX4-6GDRT /4 12 1/ IX2-7GDRT 16 1/4 16 1/ IX4-7GDRT /4 13 1/ IX2-8GDRT 17 1/4 17 1/ IX4-8GDRT /4 14 1/ IX2-9GDRT 18 1/4 18 1/ IX4-9GDRT /4 15 1/ IX2-10GDRT 19 1/4 19 1/ IX4-10GDRT /4 16 1/ IX2-11GDRT 20 1/4 20 1/ IX4-11GDRT /4 17 1/ IX2-12GDRT 21 1/4 21 1/ IX4-12GDRT /4 18 1/ IX2-13GDRT 22 1/4 22 1/ IX4-13GDRT /4 19 1/ IX2-14GDRT 23 1/4 23 1/ IX4-14GDRT /4 21 1/ IX2-16GDRT 25 1/4 25 1/ IX4-16GDRT /4 25 1/ IX2-18GDRT 27 1/4 29 1/ IX4-18GDRT /4 27 1/ IX2-20GDRT 29 1/4 31 1/ IX4-20GDRT /4 29 1/ IX2-22GDRT 31 1/4 33 1/ IX4-22GDRT /4 31 1/ IX2-24GDRT 33 1/4 35 1/ IX4-24GDRT /4 33 1/ IX2-26GDRT 35 1/4 37 1/ IX4-26GDRT /4 35 1/ IX2-28GDRT 37 1/4 39 1/ IX4-28GDRT /4 37 1/ IX2-30GDRT 39 1/4 41 1/ IX4-30GDRT /4 40 1/ IX2-32GDRT 41 1/4 44 1/ IX4-32GDRT /4 42 1/ IX2-34GDRT 43 1/4 46 1/ IX4-34GDRT /4 44 1/ IX2-36GDRT 45 1/4 48 1/ IX4-36GDRT Material options (all): Galvalume 80 Security himneys

81 Grease Duct Accessories Grease Duct Wall Thimble Used when pipe passes through a combustible wall structure to reduce clearances to combustibles. The WT allows for pipe expansion and contraction of the roof. The part consists of a wall thimble female half and a male wall thimble half that slide in each other to adjust wall thickness from 8 to 12. See installation instructions for hole opening for the right clearance for each models and other specifications. = 0. 8" to 12" NOTE: NOT AVAILABLE FOR MODEL SL For AX1, IX1, IX2, and IX4: One (1) wall thimble female half, and one (1) wall thimble male half. B A D 5 Total A - Plate s Hole B - Female Wall AX1 (1" Air Insulated) - Male Wall D - Square Plate dimension Product ode A - Plate s Hole B - Female Wall IX1 (1" Wool Insulated) - Male Wall D - Square Plate dimension Product ode 8 1/4 12 1/4 12 5/32 18 AX1-5GDWT 8 1/4 10 1/4 10 5/32 14 IX1-5GDWT 6 9 1/4 14 1/4 14 5/32 21 AX1-6GDWT 9 1/4 11 1/4 11 5/32 15 IX1-6GDWT /4 15 1/4 15 5/32 22 AX1-7GDWT 10 1/4 12 1/4 12 5/32 16 IX1-7GDWT /4 16 1/4 16 5/32 23 AX1-8GDWT 11 1/4 13 1/4 13 5/32 17 IX1-8GDWT /4 17 1/4 17 5/32 24 AX1-9GDWT 12 1/4 14 1/4 14 5/32 18 IX1-9GDWT /4 18 1/4 18 5/32 25 AX1-10GDWT 13 1/4 15 1/4 15 5/32 19 IX1-10GDWT /4 19 1/4 19 5/32 26 AX1-11GDWT 14 1/4 16 1/4 16 5/32 20 IX1-11GDWT /4 21 1/4 21 5/32 29 AX1-12GDWT 15 1/4 17 1/4 17 5/32 21 IX1-12GDWT /4 22 1/4 22 5/32 30 AX1-13GDWT 16 1/4 18 1/4 18 5/32 22 IX1-13GDWT /4 23 1/4 23 5/32 31 AX1-14GDWT 17 1/4 20 1/4 20 5/32 25 IX1-14GDWT /4 25 1/4 25 5/32 33 AX1-16GDWT 19 1/4 22 1/4 22 5/32 27 IX1-16GDWT /4 28 1/4 28 5/32 37 AX1-18GDWT 21 1/4 24 1/4 24 5/32 29 IX1-18GDWT /4 30 1/4 30 5/32 39 AX1-20GDWT 23 1/4 26 1/4 26 5/32 31 IX1-20GDWT /4 32 1/4 32 5/32 41 AX1-22GDWT 25 1/4 28 1/4 28 5/32 33 IX1-22GDWT /4 35 1/4 35 5/32 45 AX1-24GDWT 27 1/4 30 1/4 30 5/32 35 IX1-24GDWT /4 37 1/4 37 5/32 47 AX1-26GDWT 29 1/4 33 1/4 33 5/32 39 IX1-26GDWT /4 39 1/4 39 5/32 49 AX1-28GDWT 31 1/4 35 1/4 35 5/32 41 IX1-28GDWT /4 42 1/4 42 5/32 53 AX1-30GDWT 33 1/4 37 1/4 37 5/32 43 IX1-30GDWT /4 44 1/4 44 5/32 55 AX1-32GDWT 35 1/4 39 1/4 39 5/32 45 IX1-32GDWT /4 46 1/4 46 5/32 57 AX1-34GDWT 37 1/4 41 1/4 41 5/32 47 IX1-34GDWT /4 49 1/4 49 5/32 61 AX1-36GDWT 39 1/4 44 1/4 44 5/32 51 IX1-36GDWT Material options (all): Galvalume (US) (anada) 81

82 Grease Duct Accessories Grease Duct Wall Thimble continued Used when pipe passes through a combustible wall structure to reduce clearances to combustibles. The WT allows for pipe expansion and contraction of the roof. The part consists of a wall thimble female half and a male wall thimble half that slide in each other to adjust wall thickness from 8 to 12. See installation instructions for hole opening for the right clearance for each models and other specifications. = 0. NOTE: NOT AVAILABLE FOR MODEL SL B A 8" to 12" D For AX1, IX1, IX2, and IX4: One (1) wall thimble female half, and one (1) wall thimble male half. 5 Total A - Plate s Hole B - Female Wall IX2 (2" Wool Insulated) - Male Wall D - Square Plate dimension Product ode A - Plate s Hole B - Female Wall IX4 (4" Wool Insulated) - Male Wall D - Square Plate dimension Product ode 10 1/4 10 1/ /32 14 IX2-5GDWT 14 1/4 14 1/ /32 18 IX4-5GDWT /4 11 1/ /32 15 IX2-6GDWT 15 1/4 15 1/ /32 19 IX4-6GDWT /4 12 1/ /32 16 IX2-7GDWT 16 1/4 16 1/ /32 20 IX4-7GDWT /4 13 1/ /32 17 IX2-8GDWT 17 1/4 17 1/ /32 21 IX4-8GDWT /4 14 1/ /32 18 IX2-9GDWT 18 1/4 18 1/ /32 22 IX4-9GDWT /4 15 1/ /32 19 IX2-10GDWT 19 1/4 19 1/ /32 23 IX4-10GDWT /4 16 1/ /32 20 IX2-11GDWT 20 1/4 20 1/ /32 24 IX4-11GDWT /4 17 1/ /32 21 IX2-12GDWT 21 1/4 21 1/ /32 25 IX4-12GDWT /4 18 1/ /32 22 IX2-13GDWT 22 1/4 22 1/ /32 26 IX4-13GDWT /4 19 1/ /32 23 IX2-14GDWT 23 1/4 23 1/ /32 27 IX4-14GDWT /4 21 1/ /32 25 IX2-16GDWT 25 1/4 25 1/ /32 29 IX4-16GDWT /4 25 1/4 25 5/32 29 IX2-18GDWT 27 1/4 29 1/4 29 5/32 33 IX4-18GDWT /4 27 1/4 27 5/32 31 IX2-20GDWT 29 1/4 31 1/4 31 5/32 35 IX4-20GDWT /4 29 1/4 29 5/32 33 IX2-22GDWT 31 1/4 33 1/4 33 5/32 37 IX4-22GDWT /4 31 1/4 31 5/32 35 IX2-24GDWT 33 1/4 35 1/4 35 5/32 39 IX4-24GDWT /4 33 1/4 33 5/32 37 IX2-26GDWT 35 1/4 37 1/4 37 5/32 41 IX4-26GDWT /4 35 1/4 35 5/32 39 IX2-28GDWT 37 1/4 39 1/4 39 5/32 43 IX4-28GDWT /4 37 1/4 37 5/32 41 IX2-30GDWT 39 1/4 41 1/4 41 5/32 45 IX4-30GDWT /4 40 1/4 40 5/32 45 IX2-32GDWT 41 1/4 44 1/4 44 5/32 49 IX4-32GDWT /4 42 1/4 42 5/32 47 IX2-34GDWT 43 1/4 46 1/4 46 5/32 51 IX4-34GDWT /4 44 1/4 44 5/32 49 IX2-36GDWT 45 1/4 48 1/4 48 5/32 53 IX4-36GDWT Material options (all): Galvalume 82 Security himneys