DuraTech Canada. High Temperature, 1" Double- Wall, All-Fuel Chimney System, ULC S629, ULC S604, and ULC S610.

Transcription

1 uratech anada High Temperature, 1" ouble- Wall, ll-fuel himney System, UL S629, UL S604, and UL S610.

2 Specifications pplications uratech anada (T) is a double-wall, all-fuel chimney system for use with wood stoves, wood fireplaces and other appliances using wood, oil, gas, or coal. Materials and onstruction stainless steel inner wall stainless steel outer wall. 1 high-temperature mineral wool insulation learances 2 clearance to combustibles iameters 6, 7, 8 (5 & 10 available on build-to-order basis. ontact us for details.) UL S629, UL S604, and UL S610 System uratech anada uratech anada (T) is a double-wall, all-fuel chimney system for use with wood stoves, wood fireplaces and other appliances using wood, oil, gas, or coal. The use of stainless steel, selected for its resistance to high temperatures and corrosion, lends outstanding durability to the uratech anada high-temperature chimney. uratech anada features 1" of high-temperature mineral wool insulation. This insulation minimizes heat loss through the chimney walls and can withstand intense heat. The free-floating inner lining is attached only to the male coupler at the top, expanding and contracting freely with temperature fluctuations. The external casing carries the structural load. ll T pipe lengths, elbows, and other fittings feature fast and easy twist-lock assembly with just one-eighth turn. Even better, T uses universal support hardware to speed up installation and to dramatically reduce the number of SKUs you need to keep in inventory. Listings UL S629, UL S604, and UL S M&G uravent

3 Typical Installations Installation Key 1 Elbow 9 Floor Support 2 Wall Radiation Shield 10 lack Stove Pipe 3 Length 11 Finishing Support 4 Re-Support 12 Telescopic Rigid Shield 5 ttic Radiation Shield 13 Radiation Shield onnector 6 djustable Roof Flashing 14 Storm ollar 7 Vertical ap 15 Radiation Shield onnector Firestop 8 Firestop 16 Flashing Refer to our Typical Venting Installation drawings to select the appropriate component parts for your installation Vertical ap Storm ollar Radiation Shield onnector Radiation Shield onnector Firestop Telescopic Rigid Shield onnector Pipe dapter Length 4 8 Wall Thimble Tee Tee Support Tee ap M&G uravent 44

4 uratech anada 1 ll-fuel himney for anada Loadbearing apacity Please reference the below chart for each diameter s and support s loadbearing capacity. Maximum height in feet. 0 Interior Floor Support Plate Tee Support djustable Tee Support Roof Support Re-Support Square athedral Support Finishing Support eiling Support w/ djustable Supports Round athedral Support Size of Openings The size of the opening may vary depending on the pitch of the roof. Maintain a 2 clearance from the chimney. 0 Interior Floor Support Plate 12 3/8 13 3/8 14 3/8 eiling Support 12 3/8 14 3/8 14 3/8 Finishing Support 12 3/8 14 3/8 14 3/8 Roof Support 12 3/8 13 3/8 14 3/8 Wall Thimble 12 3/8 13 3/8 14 3/8 Firestop 12 3/8 13 3/8 14 3/8 Round or Square athedral Support 12 3/8 14 3/8 14 3/8 45 M&G uravent

5 1 ll-fuel himney for anada uratech anada Exterior Kit Kit includes: Insulated Wall Thimble, onnector for use with double-wall or single-wall smoke pipe, ecorative ollar, Tee & Tee ap (TSS), djustable Tee Support (TS), Wall Strap, and Vertical ap with Spark rrester. SIZE 6 ORER # 6T-KTTW STOK # Interior Kit Kit includes: Finishing Support with oupler, Insulated ttic Radiation Shield, and Vertical ap. SIZE 6 ORER # 6T-KS STOK # Interior Kit (New onstruction) *new part Kit includes: Finishing Support with oupler and removable collar, Insulated djustable Radiation Shield, and Vertical ap. SIZE 6 ORER # 6T-KIN STOK # M&G uravent 46

6 uratech anada 1 ll-fuel himney for anada Pipe Length vailable in sizes from 6- to 8-inch diameters, the uratech anada line offers double-wall, 1-inch insulated chimneys. Features a 1/8 twist-lock assembly. Weight per foot (lbs) LENGTH EFFETIVE LENGTH ORER # STOK # ORER # STOK # ORER # STOK # 8 6 ¾ 6T-08SS T-08SS T-08SS ¾ 6T-12SS T-12SS T-12SS ¾ 6T-18SS T-18SS T-18SS ¾ 6T-24SS T-24SS T-24SS ¾ 6T-36SS T-36SS T-36SS ¾ 6T-48SS T-48SS T-48SS djustable Pipe Length Used in combination with straight insulated lengths, the adjustable length makes it possible to fit a uratech anada length perfectly. 3 min. overlap IMPORTNT: The adjustable length is not designed as a load-bearing component. e sure to follow written instructions regarding support requirements. 11 ¼ 11 ¼ 11 ¼ LENGTH ORER # STOK # ORER # STOK # ORER # STOK # 12 6T-12TSS T-12TSS T-12TSS support must be installed within this area 47 M&G uravent

7 1 ll-fuel himney for anada uratech anada 15 Elbow Use to offset chimney around obstacles such as a joist or truss. maximum of two offsets (4 elbows) is permitted. Each elbow is sold individually. ½ 4 ½ ORER # 6T-E15SS 7T-E15SS 8T-E15SS STOK # Elbow Use to offset chimney around obstacles such as a joist or truss. maximum of two offsets (4 elbows) is permitted. Each elbow is sold individually. 2 7 ½ ORER # 6T-E30SS 7T-E30SS 8T-E30SS STOK # Elbow Use to offset chimney around obstacles such as a joist or truss. maximum of two offsets (4 elbows) is permitted. Each elbow is sold individually /8 ORER # 6T-E45SS 7T-E45SS 8T-E45SS STOK # Tee Use for through-the-wall chimney applications. Tee comes standard with insulated Tee ap (TSS). This cap is compatible with the Tee Support (TS) or djustable Tee Support with oupler (TS). 10 ½ 11 ¾ 13 5 ¼ 5 ¼ 6 ¼ 6 6 ½ 7 ¼ ORER # 6T-TSS 7T-TSS 8T-TSS STOK # M&G uravent 48

8 uratech anada 1 ll-fuel himney for anada Tee ap Insulated ap comes standard with every tee. Use with Tee Support (TS) or djustable Tee Support with oupler (TS). Provides access for inspection & cleaning. ORER # 6T-TSS 7T-TSS 8T-TSS STOK # Tee ap (Twist-Lock) n alternative to the standard Tee ap, this insulated Twist-Lock Tee ap cap can be used with an djustable Tee Support (TS). Provides easy access for inspection & cleaning. an be used on the bottom of an additional pipe length below the tee to add an ash reservoir. ORER # 6T-TI 7T-TI 8T-TI STOK # Wall Thimble esigned to protect surrounding combustible materials when a chimney passes through a wall. djustable to permit use with walls from 7 to 12 ½ thick. Insulated to help prevent cold air intrusion. SIZE E ¼ 9 ¼ 10 ¼ 7 ½ to 12½ 16 E ORER # 6T-WTI 7T-WTI 8T-WTI STOK # Wall Radiation Shield - 30 esigned for use when the chimney passes through a wall at an angle. Insulated to prevent cold air intrusion. E SIZE ¼ 37 ¾ 39 ¾ 15 3/8 16 5/8 17 5/ ¾ 35 ¾ E 3 ORER # 6T-WRSI30 7T-WRSI30 8T-WRSI30 STOK # M&G uravent

9 1 ll-fuel himney for anada uratech anada Wall Radiation Shield - 45 esigned for use when the chimney passes through a wall at an angle. Insulated to prevent cold air intrusion. E SIZE /8 26 5/ /8 16 5/8 17 5/ /8 23 ½ E 3 ORER # 6T-WRSI45 7T-WRSI45 8T-WRSI45 STOK # Finishing Support w/ oupler F E Use to support the chimney at the ceiling. Includes coupler to work with either double-wall or single-wall stove pipe. llows 6" pipe to fit within a minimum 12 x 12" framed opening. lack finish /8 14 3/8 6 ¼ 7 ¼ 8 ¼ 20 5 ½ E 3 F 2 ORER # 6T-FS 7T-FS 8T-FS STOK # Finishing Support w/ oupler w/ Removable Outer Trim ollar F E Use to support the chimney at a ceiling. esigned to connect to both double-wall and single-wall stove pipe. It is enhanced by a decorative black finish. Fits even narrow joist spaces with a 12 diameter for 6 chimney. Must be attached to a frame built from the joists (refer to loadbearing capacity and size of openings chart). Removable trim collar is great for retrofit and new construction. oupler included. SIZE ¼ 20 5 ½ E 3 F 2 ORER # 6T-FSR STOK # M&G uravent 50

10 uratech anada 1 ll-fuel himney for anada Square athedral eiling Support w/ oupler Use to support a chimney that is passing through an angled ceiling. Fits even narrow joist spaces with a 12 diameter for 6 chimney. esigned to connect to both double-wall and single-wall stove pipe. n adjustable black finish trim is included. Refer to chart for loadbearing capacity. oupler included ¼ 7 ¼ 8 ¼ 6 ¼ 7 ¼ 8 ¼ /8 14 3/ /8 14 3/ " 2 2" ORER # 6T-S 7T-S 8T-S 6T-S24 7T-S24 8T-S24 STOK # Square athedral eiling Support Extension Use to extend the height of the square cathedral support with steep roof pitch applications. This support is universal. an be used with 6", 7", and 8" square supports /8 14 3/ /8 14 3/ ORER # 6T-SE T-SE T-SE 6T-SE24 T-SE24 T-SE24 STOK # eiling Support w/ djustable rm & oupler This specialty support can be used where space is limited such as shallow attics. ttachment arms provide up to 2 1/2" of play to allow for box alignment. Includes oupler. Works with either double-wall or single-wall stove pipe. Refer to installation instructions for further details. SIZE ORER # 6T-SS STOK # M&G uravent

11 1 ll-fuel himney for anada uratech anada Round athedral Support w/ oupler Round support can be used with either flat ceilings or cathedral applications. Includes oupler. Works with either double-wall or single-wall stove pipe. lack finish /8 14 3/8 6 ¼ 7 ¼ 8 ¼ 3 13 ORER # 6T-RS 7T-RS 8T-RS STOK # E Firestop Radiation Shield Use to protect combustible materials when the chimney passes through a floor or an intermediate ceiling. It ensures a 2 safety clearance between the chimney s outer casing and surrounding combustibles. When passing through a ceiling, it must be installed from the underside of the ceiling. Required in some jurisdictions in replacement of the firestop ORER # 6T-FRS 7T-FRS 8T-FRS STOK # ttic Radiation Shield Protects combustible materials when a chimney passes through an attic. It is imperative that it be installed overside from the attic. Its collar keeps insulation from seeping between the outer casing and the firestop. It also maintains a 2 clearance from combustible materials. firestop (FS) is not needed when a support is used directly below. Insulated to prevent cold air intrusion ORER # 6T-ISI 7T-ISI 8T-ISI STOK # M&G uravent 52

12 uratech anada 1 ll-fuel himney for anada djustable ttic Radiation Shield 12 Protects combustible materials when a chimney passes through an attic. Height is adjustable from 12 to 22. It is imperative that it be installed overside from the attic. Its collar keeps insulation from seeping between the outer casing and the firestop. It also maintains a 2 clearance from combustible materials. firestop (FS) is not needed when a support is used directly below. Insulated to prevent cold air intrusion ORER # 6T-ISI 7T-ISI 8T-ISI STOK # Floor Support Plate Use to support the chimney on a slab, floor, or joist and also acts as a firestop. It makes it possible to maintain a 2 clearance between the chimney s outer casing and combustible materials in its path. It includes a tightening collar that locks around the chimney and is secured by self-tapping screws (included). The collar rests on a horizontal plate screwed or nailed to the floor or slab. It can also serve as an intermediate support. Refer to chart for loadbearing capacity ORER # 6T-FSP 7T-FSP 8T-FSP STOK # nchor Plate ttach to a masonry or factory-built fireplace to provide proper connection to the chimney The nchor Place can also be used with furnaces or boilers ORER # 6T-P 7T-P 8T-P STOK # M&G uravent

13 1 ll-fuel himney for anada uratech anada onnector Pipe dapter Used to make the transition from insulated chimney to stovepipe in a through-the-wall installation and within certain cathedral ceiling applications. The onnector Pipe dapter can also be used as an appliance connector / adapter. Refer to installation instructions for more details ORER # 6T- 7T- 8T- STOK # ngled Firestop - 30 For use with factory-built fireplaces certified with uratech anada. 15 3/8 16 5/8 17 5/8 35 ¼ 37 ¾ 39 ¾ 13 5/ / /16 ORER # 6T-FS30 7T-FS30 8T-FS30 STOK # ngled Firestop - 45 For use with factory-built fireplaces listed with uratech anada. 15 5/8 16 5/8 17 5/8 24 7/8 26 5/ / /16 11 ½ ORER # 6T-FS45 7T-FS45 8T-FS45 STOK # Firestop Use below each combustible floor the chimney passes through ORER # 6T-FS 7T-FS 8T-FS STOK # M&G uravent 54

14 uratech anada 1 ll-fuel himney for anada Universal Wall Strap Use on an interior or exterior wall. Provides stability for the chimney while also maintaining required clearances to combustible surfaces. Wall Straps are recommended at 8' intervals. an be adjusted to permit standoff distance of 2 up to 6. Universal design can be used on 6", 7", and 8" pipe diameters ORER # T-WSU STOK # Tee Support Supports the Tee and chimney at the base of the installation. First pipe length simply twist-locks into place on top of this support. Standard insulated tee cap that comes with the tee is fastened to the bottom side of this support's flue extension as per instructions ORER # 6T-TS 7T-TS 8T-TS STOK # djustable Tee Support w/ oupler Supports the chimney at the base of the installation, functioning similarly to the tee support but with an adjustable base to provide additional wall clearance as needed. The tee support must be installed with the insulated tee cap included with the insulated tee. oupler included. 11 ½ 15 ½ 15 ½ ¾ 0 to 5 ORER # 6T-TS 7T-TS 8T-TS STOK # M&G uravent

15 1 ll-fuel himney for anada uratech anada djustable Tee Support Supports the chimney at the base of the installation or along a wall or other vertical surface serving as an intermediate support. lso permits the tee to be installed above or below the support. It comes with a tightening collar locked around the chimney and secured by two self-tapping screws (included). The collar rests on a horizontal plate. When used as a base support, it lends itself to the addition of an insulated tee cap (TI). Refer to chart for loadbearing capacity ¾ 0 to 5 ORER # 6T-TS 7T-TS 8T-TS STOK # Re-Support Use to support the chimney on a vertical wall. The triangular plates allow a 2 to 4 lateral adjustment of the support to the vertical surface. This support can also be used as a wall support above the insulated tee or as a support for an offset elbow. Refer to chart for loadbearing capacity. In shorter chimney stack applications, the Re-Support can also be used in place of a Tee Support. Universal design works with 6", 7", or 8" pipe diameters. 9 ½ 10 ½ 11 ½ 12 2 ¾ 2 ORER # T-RESU STOK # Roof Support Use to attach to roof structure. esigned to support the chimney from the roof (adjusting to any roof pitch), above an offset, and when the chimney height exceeds the loadbearing capacity of the primary support. Two adjustable plates screwed to the structure adapt to the pitch of the roof. tightening collar is attached and locks the chimney It is secured by self-tapping screws. Refer to loadbearing capacity chart. Universal design works with 6", 7", or 8" pipe at any roof pitch. Further uses and details available in installation instructions ORER # T-RS STOK # M&G uravent 56

16 uratech anada 1 ll-fuel himney for anada Universal Roof race Stabilizes a chimney extending from 60 to 115 beyond the roof, or when a chimney is exposed to high winds. This part is supplied with tightening collar and adjustable legs. Universal design permits use with 6", 7", and 8" diameter pipe. Note: Not intended to provide protection against sliding ice and snow to 115 ORER # T-XR STOK # Guy Wire and ttach to the outer casing of the chimney (secured by bolts), it is designed to hold 3 guy wires. Recommended for chimneys exceeding the roof by 5 to 13 maximum. Wire not included. Note: Not intended to provide protection against sliding ice and snow. 2 ORER # 6T-GW 7T-GW 8T-GW STOK # Flat Roof Flashing Seals a chimney length when passing through a flat roof. Storm collar included. 7 ½ 24 ORER # 6T-FF 7T-FF 8T-FF STOK # Peak Roof Flashing Required for chimney installations passing through a roof's peak (ridge line). Storm collar included. 3 5/8 1/12-7/ ½ ORER # 6T-FP7 7T-FP7 8T-FP7 STOK # ¼ 8/12-12/12 14 ORER # 6T-FP12 7T-FP12 8T-FP12 STOK # M&G uravent

17 1 ll-fuel himney for anada uratech anada djustable Roof Flashing Use to accommodate chimney installation on sloped roof. hoose from 3 different pitches in standard or aluminum malleable versions. Storm collar is included. 6 1/12-7/12 24 ORER # 6T-F7 7T-F7 8T-F7 STOK # /12-7/12 36 luminum Malleable ORER # 6T-F7S 7T-F7S 8T-F7S STOK # /8 3 7/8 8/12-12/12 24 ORER # 6T-F12 7T-F12 8T-F12 STOK # /12-12/12 luminum Malleable 12/12-21/ /8 6 7/8 36 ORER # 6T-F12S 7T-F12S 8T-F12S STOK # ¼ 36 ORER # 6T-F21 7T-F21 8T-F21 STOK # Storm ollar Use to provide a weather-tight seal over flashings. lso used to enclose ttic Insulation Shields. 5 ORER # 6T-S 7T-S 8T-S STOK # Vertical ap ttach to the top of the chimney, preventing rain, snow and leaves from entering the opening. heck local codes to determine if a spark arrester is required. 4 ¾ 4 ¾ 4 ¾ 12 ¼ 12 ¼ 15 ½ ORER # 6T-V 7T-V 8T-V STOK # M&G uravent 58

18 uratech anada 1 ll-fuel himney for anada Universal Spark rrester and Wraps around the rain cap, preventing sparks from falling onto the roof or animals from entering into the chimney. ORER # T-S STOK # Trim ollar Used to help conceal any gap around the chimney where it passes through a ceiling or any wall. Ø Int. Ø Ext. 0 INTERIOR EXTERIOR ORER # 6T-T 7T-T 8T-T STOK # ecorative ollar Provides a finish between uratech anada chimney s female coupler and single-wall stove pipe ORER # 6T- 7T- 8T- STOK # lack Pipe dapter onnects a standard black pipe to uratech anada chimney when a longer extension length is required. Finishing ollar included. consult installation instructions for more details. 12 ORER # 6T-P 7T-P 8T-P STOK # M&G uravent

19 1 ll-fuel himney for anada uratech anada Finishing one Use to conceal the protrusion of the insulated length (5 ) inside the dwelling. flue extension must be used to ensure a perfect connection between the chimney and the double-wall black connector /8 14 3/8 6 ¼ 7 ¼ 8 ¼ 5 ½ ORER # 6T-F 7T-F 8T-F STOK # Snow Splitter Ships flat, and unfolds easily on the job site. Includes 8 fastening flanges (4 on each side) for mounting. Made with heavy 14 gauge galvanized steel. Measures 30" x 22" x 16". 12 ORER # T-SP STOK # M&G uravent 60

20 uratech anada 1 ll-fuel himney for anada Premium Shield ccessories Radiation Shield onnector 16 Use in conjunction with a Radiation Shield onnector Firestop (FRS) or Firestop Radiation Shield onnector Support (FRSS). The Radiation Shield onnector is used to pass through a floor / ceiling. The RSI is connected to the top portion of a premium shield, and attaches to the chimney using built-in brackets and 4 screws (supplied). storm collar must be used to enclose the top of an RSI within an attic. The storm collar is sold separately. 10 7/ / /16 ORER # 6T-RSI 7T-RSI 8T-RSI STOK # Radiation Shield onnector Firestop Ø Where support is not required, the Radiation Shield onnector Firestop can be used in conjunction with the Radiation Shield onnector (RSI) to pass through a floor / ceiling /8 11 5/8 12 5/8 ORER # 6T-FRS 7T-FRS 8T-FRS STOK # Firestop Radiation Shield onnector Support Ø When additional support is required, the Firestop Radiation Shield onnector Support is used in conjunction with the Radiation Shield onnector (RSI) to pass through a floor / ceiling. Refer to installation instruction for more details / / / ORER # 6T-FRSS 7T-FRSS 8T-FRSS STOK # M&G uravent

21 1 ll-fuel himney for anada uratech anada Telescopic Rigid Shield The telescopic shield includes three overlapping sections that can extend from a minimum of 48" up to a maximum of 136" to enclose the chimney where required. ORER # 6T-TRS 7T-TRS 8T-TRS STOK # Min 136 Max Flexible Shield Ext. 40 ⅝ Min 108 Max The Flexible Shield is used in much the same fashion as the Telescopic Rigid Shield (TRS) but will be required where offset elbows are involved. Includes stand-off spacers. Must be installed as per instructions. 10 5/8 11 5/8 12 5/ / / /16 ORER # 6T-FLXS 7T-FLXS 8T-FLXS STOK # Ext. Swivel dapter Use as an option to ease the connection in tight spaces between the flexible shield and the radiation shield connector. 6 ⅜ 10 5/8 11 5/8 12 5/ / / /16 ORER # 6T-S 7T-S 8T-S STOK # M&G uravent 62

22 uratech anada 1 ll-fuel himney for anada Offset hart OFFSET RISE Use to determine the lengths required for an installation. etermine the offset required in view of the obstacles that must be avoided. Refer to the offset/rise chart to determine the elbows required as well as the insulated lengths needed. heck the corresponding offset height dimensions. Elbow egrees SIZE One Length etween Elbows Two Lengths etween Elbows himney Section Offset Inches Rise Inches Offset Inches Rise Inches / / / / / / / / /8 36 3/ / / /16 19 ½ 76 3/ ½ 42 ¾ 25 5/ /8 54 3/8 25 ¾ 99 9/ / / / /16 23 ½ 32 13/ / / /16 69 ¼ / / / / /16 44 ¼ 44 13/ / / / /16 95 ¼ / / / / / /8 46 ¼ 53 ¾ /8 24 7/8 50 ½ /8 29 1/8 54 ¾ 62 ¼ /8 37 5/8 63 ¼ 70 ¾ /8 46 1/ / /16 63 M&G uravent