Attenda Floor Mount Bed ATN101 Bed Deck Width 80" Bed Deck Depth 36" Height 15.5" Overall Width 84" Overall Depth 40" Weight 110-115 lbs solution. Premium Tru material is fully compounded for superior color, fire retardancy and Product tested to 1,000 lbs. static load Options Bottom Closure Panel: ATN101B No Bolt Down Holes: ATN103 Norix supplied tamper-resistant hardware bolts into Riser through existing mounting holes in Attenda Bed. Riser holes must be drilled at the time of installation to ensure proper alignment. See assembly instructions for further details. Riser also can be sand ballasted through knock out access port for weighting free standing units. Push in cap seals access port. U.S. Mechanical Issued and Pending. US Patent No. 8,007,059 B2
Attenda Bed Riser ATN102 Width 83.5" Depth 39.5" Height 8.5" Weight 66 lbs solution. Premium Tru material is fully compounded for superior color, fire retardancy and Fossil, Moss Norix supplied tamper resistant hardware bolts into Riser through existing mounting holes in Attenda Bed. Riser can be sand ballasted through knock out access port for weighting free standing units. Push in cap seals access port. U.S. Mechanical Issued and Pending. US Patent No. 8,007,059 B2
Attenda Space-Saver Bed ATN120 Bed Deck Width 77 Bed Deck Depth 29 Height 15 Overall Width 79 Overall Depth 21 Weight 80 lbs solution. Premium Tru material is fully compounded for superior color, fire retardancy and Product tested to 1,000 lbs static load Wedge anchors and 3/8 bolts required for permanently attaching to floor. Anchors and bolts not supplied by Norix. Groove along underside edge for caulk application (caulk not supplied by Norix). U.S. Mechanical Issued and Pending. US Patent No. 8,007,059 B2
Attenda Space-Saver Bed ATN150 Bed Deck Width 79" Bed Deck Depth 30" Height 15" Overall Width 80" Overall Depth 32" Weight 85 lbs solution. Premium Tru material is fully compounded for superior color, fire retardancy and Product tested to 1,000 lbs static load Wedge anchors and 3/8" bolts required for permanently attaching to floor. Anchors and bolts not supplied by Norix. Groove along underside edge for caulk application (caulk not supplied by Norix). products. Clean, Restore and Protect with Norix's 1-2-3 Care System for Molded Furniture. U.S. Mechanical Issued and Pending. US Patent No. 8,007,059 B2
Attenda Restraint Rings 1 /4" thick steel. Made in the U.S.A.. ATN301 Width 3" Depth 0.563" Height 1.688" Weight 1.1 lbs It is intended that the restraint ring is installed with the same anchors used to secure the bed. Anchors not supplied by Norix. 10 year limited replacement warranty. products. Norix Cleaning Solutions Stainless Steel Cleaner. Intended Use Desclaimer These goods are sold by Norix for institutional use only and not as consumer products. Except for the warranty of title, NO WARRANTY OF MERCHANTABILITY, FITNESS OR OTHER WARRANT (WHETHER EXPRESSED, IMPLIED OR STATUTORY) IS MADE BY NORIX, except that Norix warrants the goods to be free from defects in materials and workmanship in normal use and service. NORIX IS NOT LIABLE FOR CONSEQUENTIAL DAMAGES. THESE GOODS ARE NOT WARRANTED AS SUITABLE FOR ANY PARTICULAR PURPOSE PARTICULAR TO BUYER. THE SUITABILITY OF GOODS FOR ANY PURPOSE PARTICULAR TO BUYER IS FOR BUYER, IN BUYER S SOLE JUDGEMENT, TO DETERMINE. NORIX ASSUMES NO RESPONSIBILITY FOR THE SELECTION OR FURNISHING OF GOODS SUITABLE TO THE INDIVIDUAL NEEDS AND PURPOSES OF ANY PARTICULAR BUYER.