CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-742 Rotary Cutter ~ The World's Largest Rotary Cutter ~

CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-742 Rotary Cutter ~ The World's Largest Rotary Cutter ~ CUTTER FEATURES - 42ft Cutting Width (12.8 m) - 250hp Minimum Tractor Size - Hydraulic Phasing & Mechanical Hybrid - 2" - 16" Cutting Height (51-406 mm) - Floating Hitch Lift System with Hydraulic Depth Control - 118" Transport Width (3m) - 10 Gearbox Layout with - Adjustable Wheel Standards - 10 ga Domed Deck (3.4 mm) - 7 Slip Clutches (7 down clutches) - 1 Year Full Warranty & 3 Years - Replaceable 2 Piece Skid Shoes - 18,000 lbs Total Weight (8,165 kgs) Limited Gearbox Warranty - 2" Cutting Capacity (51 mm) - Easy to Use Safety Lock Up HOW TO ORDER: You must select from Sections 1-5 to receive a complete rotary cutter ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ Price CDN Wt/kgs C742-100 FX742 Rotary Cutter 104,249.00 7076 S000-097 Safety Light Kit (Required) 419.00 ~ ~ Selection 2 ~ Choose Axle and Tire Configuration~ ~ C742-630 Through Axle Kit -Choose 10 Tires 6,159.00 C742-635 Walking Axle Kit - Choose 14 Tires 9,935.00 ~ ~ Selection 3 ~ Choose Axle Tire Option ~ ~ 210-530WG Tire Assembly 11L Stubble Proof (Choose Quanity of Tires Needed 10 or 14) 633.00 ~ ~ Selection 4 ~ Choose a Blade Configuration ~ ~ C742-250 Pan Kit with Updraft Blades 6,216.00 454 C742-260 Pan Kit with Updraft Blades & Shredder Kit 7,717.00 540 C742-265 Fixed Knife Kit with Flat Double Sided Blades & Shrouds 8,859.00 1,600 C742-270 Fixed Knife Kit with Updraft Blades & Shrouds 8,859.00 726 Assembly charge on pan units 1,200.00 Assembly charge on fixed blade units 1,300.00 ~ ~ Selection 5 ~ Choose a Safety Guard & Accessories ~ ~ C742-500 Single Chains Front & Rear 3,405.00 308 C742-550 Front & Rear Rubber Belting 1,913.00 100 C742-580 Single Chains Front & Rear with Front Rubber Belting 3,430.00 358 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

S CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-742 Rotary Cutter ~ The World's Largest Rotary Cutter ~ ~ ~ Selection 5 ~ Choose Wheel Extension Kit ~ ~ Price CDN Wt/kgs 68 C742-350 Row Crop Wheel Extensions 795.00 98 (Will accommodate 30", 32", 36", 38", 40" + 1m rows) (Transport width of 146" or 3.7m) NOTE: All Tires Are 11L x 15 x 12 Ply Rated ~ ~ Selection 6 ~ Choose a Destination Code ~ ~ C742-NA North American Destination Kit 312.00 ~ ~ Selection 7 ~ Options~ ~ C742-780 Fan Debris Kit, Factory Installed 7,693.00 C742-790 Fan Debris Kit, Crated 7,474.00 C742-740 HYD Cooler Factory Installed 4,672.00 C742-745 HYD Cooler Factory crated 4,584.00 IMPORTANT: Safety Tow Chain Kit must be used at all times when moving equipment on any type of road. IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards for recommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown Object Shield Information Message in the Rotary Cutter Spec Section in the sales price book. PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-530 ROTARY CUTTER CUTTER FEATURES - 30' of mowing and shredding excellence - Phasing system for parallel lift cut - Accommodates 30",32", 36", 38" row spacings - Non-adjustable clutches provide low - Spun formed pans available on pan uint maintenance -Excellent shredding and distribution capabilities -Available Cyclone Deck Debris Fan Kit on Fixed Knife units -350 hp, 60 deg splitter gearbox allows for - Unique drive layout allows for clutch on every Unique driveline layout down box - Floating hitch with rubber grommet rear suspension ~ ~ Selection 1 ~ Choose a Basic Unit, Drive Package ~ ~ Price CDN WT(kgs) 1) C530-100 Schulte FX-530, Basic Unit (Required) 52,669.00 4105 2) S000-097 Safety Light Kit (Required) 419.00 ~ ~ Selection 2 ~ Choose a Hitch Option ~ ~ C530-810 Trailing Hitch, CV Style Required 1,920.00 166 Choose a Shaft 340-885WG 1 3/4 inch Tractor Shaft 1,467.00 340-875WG 1 3/8 inch Tractor Sahft 1,331.00 2) C530-800 Trailing Equal Angle Hitch Sub Assembly 2,526.00 597 Must Choose a Hitch Block a) C502-821 Category 3, fits up to a 1-1/2 pin and a drawbar 2-1/4 x 3-1/2 299.00 b) C502-822 Category 4, fits up to a 2 pin and a drawbar 2-1/2 x 5-1/8 303.00 c) C502-828 Category 5, fits up to a 2-3/4 pin and a drawbar 3-1/8 x 6-1/4 301.00 Choose a Tractor Shaft: IMPORTANT : PTO Adaptor must not be used in any application. a) 340-5505WG Equal Angle Shaft, 1 3/8" x 21 Spline 922.00 592 b) 340-5506WG Equal Angle Shaft, 1 3/4" x 20 Spline 685.00 592

CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-530 ROTARY CUTTER Subject to GST ~ ~ Selection 3 ~ Choose an Extension Kit ~ ~ 170 C530-350 Row Crop Extensions (not required with FLX1510) 766.00 250 ~ ~ Selection 4 ~ Choose an Axle Kit~ ~ C530-625 NON WALKING WHEEL STANDARDS (Choose 8 TIRES) 4,928.00 C530-635 WALKING AXLES (choose 10 TIRES) 6,961.00 C530-670 Standard Axle Add-on (Choose 2 tires) 1,444.00 ~ ~ Selection 5 ~ Choose Tire Kit~ ~ 210-511WG Light Truck Tires (Choose quanity of tires needed 8, 10 or 2) 318.00 210-530WG Tire Assembly 11L Stubble Proof (Choose quanity of tires needed 8, 10 or 2 633.00 ~ ~ Selection 6 ~ Choose a Pan or FIxed Knife Kit ~ ~ C530-250 Pans and Updraft Blades 4,182.00 472 C530-270 Fixed Knife Kit c/w Shrouds and Updraft Blades 4,267.00 140 C530-280 Fixed Knife kit c/w Shrouds and Non Updraft Blades 4,267.00 474 ~ ~ Selection 7 ~ Choose a Shielding Kit or Combination ~ ~ C530-500 Front Single Chains 835.00 100 C530-510 Rear Single Chains 1,016.00 100 C530-550 Front Double Chains 1,225.00 159 C530-560 Rear Double Chains 1,459.00 159 C530-570 Half-length front belting 413.00 C530-575 Half-length rear belting 410.00 C530-580 Front Belting 535.00 34 C530-590 Rear Belting 555.00 34

CANADIAN Subject to GST MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-530 ROTARY CUTTER ~ ~ Selection 8 ~ Choose Destination Kit ~ ~ C530-NA North American 149.00 ~ ~ Selection 9 ~ Choose Options ~ ~ C530-330 Hydraulic Actuated Outer Wings 1,582.00 82 C530-920 Crop Divider 270.00 16 New Option Schulte Cyclone Fan Kits C530-780 Fan Debris Kit, Factory Installed 7,774.00 C530-790 Fan Debris Kit, Crated 7,554.00 C530-740 HYD Cooler Factory Installed 4,200.00 C530-745 HYD Cooler Factory Crated 4,123.00 IMPORTANT: Assembly Charge on Pan Units 900.00 Assembly Charge on Fixed Blades 1,000.00 1) Safety Chain Kit must be used at all times when moving equipment on any type of road. 2) PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown Object Shield Message in the Rotary Cutter Spec section in sales price book.

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 5026 Rotary Cutter CUTTER FEATURES - 10GA deck - Spring steel bushings at major - S000-010 safety chain kit 1/4" grade 70 - Phasing cylinders (3) c/w hoses pivot points with 10,000 lbs capacity - Wing lift cylinders (2) c/w hoses - 1000 RPM - Two piece replaceable skid shoes - Suspension for center and wings - Deck protection rings - Operator's manual in holder HOW TO ORDER: You must select from 1-6 to receive a complete rotary cutter including standard features. To receive additional options, choose from selection 7. Price CDN ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ Wt/kgs 1) C502-100 Basic 26' Unit, 1000 RPM 46,066.00 2781 2) S000-040 Safety Light Kit (Required) 564.00 ~ ~ Selection 2 ~ Choose a Hitch Type and Accessories ~ ~ 1) C502-810 Trailing hitch, CV Style 986.00 84 Choose a Clevis: a) C502-113WG Solid Tongue 133.00 6 b) C502-107WG Open Clevis 121.00 5 c) C000-300WG Precision hitch 471.00 13 d) C502-815WG Clevis with 2 3/16" Opening 154.00 6 f) C000-360WG Adjustable Clevis 330.00 Choose a Tractor Shaft: a) 340-8082WG CV Shaft, 1 3/4" x 20 Spline 1,920.00 36 b) 340-8092WG CV Shaft, 1 3/8" x 21 Spline 1,907.00 36 2) C502-820 Trailing Equal Angle Hitch Sub Assembly 1,862.00 122 Must Choose a Hitch Block a) C502-821 Category 3, fits up to a 1-1/2 pin and a drawbar 2-1/4 x 3-1/2 299.00 b) C502-822 Category 4, fits up to a 2 pin and a drawbar 2-1/2 x 5-1/8 303.00 c) C502-828 Category 5, fits up to a 2-3/4 pin and a drawbar 3-1/8 x 6-1/4 301.00 Choose a Tractor Shaft: IMPORTANT : PTO Adaptor must not be used in any application. a) 340-5505WG Equal Angle Shaft, 1 3/8" x 21 Spline 922.00 33 b) 340-5506WG Equal Angle Shaft, 1 3/4" x 20 Spline 685.00 33 3) C502-825 Parallel Ring hitch 1,610.00 87 (Required) 230-015WG Pintle Ring, Forged,PT-48 (installed on Parallel hit 150.00 5 Choose a Tractor Shaft: a) 340-8082WG CV Shaft, 1 3/4" x 20 Spline 1,907.00 36 b) 340-8092WG CV Shaft, 1 3/8" x 21 Spline 1,907.00 36 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 5026 Rotary Cutter ~ ~ Selection 3 ~ Choose a Blade Configuration ~ ~ Price CDN Wt/kgs 1) C502-250 Two Blade Pan Kit 4,254.00 271 2) C502-251 Two Blade Pan Kit with Shredder Blades 4,585.00 339 3) C502-270 Fixed Knife Shredder Kit with Updraft Blades 6,476.00 269 4) C502-280 Fixed Knife Shredder Kit with Flat Blades 6,474.00 269 (recommended for Irrigated cotton) Assembly charge on pan units Net 600.00 Assembly charge on fixed blade units Net 715.00 ~ ~ Selection 4 ~ Choose a Safety Guard & Accessories ~ ~ 1) C502-420 Single Safety Chains Front & Rear c/w Front Rubber Belting 2,132.00 163 (recommended for cotton & corn) 2) C502-430 Single Safety Chains Front Only c/w Front & Rear Rubber Belting 1,902.00 117 (recommended for dry grass staw, wheat straw & barley straw) 3) C502-440 Single Safety Chains Front & Rear c/w frt & rear belting 2,948.00 4) C502-500 Single Safety Chains Front & Rear 1,893.00 154 a) C502-570 Cable Through Chains (optional for C502-500 & C502-550) 125.00 2 5) C502-550 Double Safety Chains Front & Rear 2,671.00 307 a) C502-570 Cable Through Chains (optional for C502-500 & C502-550) 125.00 2 IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown Object Shield Information Message in the Rotary Cutter Spec Section in the sales price book. PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 5026 Rotary Cutter ~ ~ Selection 5 ~ Choose Axle Option ~ ~ Price CDN Wt/kgs 1) C502-622 Standard Axle Kit (Choose 6 tires) 2,856.00 386 2) C502-624 Standard Axle Kit (choose 8 tires) 3,747.00 497 3) C502-626 Walking Axle Kit (Choose 8 Tires) 4,258.00 294 4) C502-628 618 Walking Axle Kit (Choose 8 tires) 6,097.00 392 ~ ~ Selection 6 ~ Choose Tire Kit~ ~ 5) 210-182NRWG Used Aircraft Tire (Choose quanity of tires needed 6 or 8) 371.00 345 6) 210-505WG Light Truck Tire (Choose quanity of tires needed 6 or 8) 337.00 345 ~ ~ Selection 7 ~ Schulte Fan Kit ~ ~ 1) C502-780 Fan Debris Kit, Factory Installed 7,722.00 150 2) C502-790 Fan Debris Kit, Crated 7,502.00 150 ~ ~ Selection 8 ~ Choose a Destination Code ~ ~ Please select the destination of the cutter for proper Decals and Manuals. 1) C502-NA North America and Australia Destination Kit 71.00 2) C502-UK United Kingdom Destination Kit 87.00 3) C502-FR France Destination Kit 95.00 4) C502-SE Sweden Destination Kit 87.00 5) C502-DE Germany Destination Kit 87.00 6) C502-RU Russia Destination Kit 87.00 7) C502-UA Ukraine Destination Kit 87.00 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 5026 Rotary Cutter ~ ~ Selection 9 ~ Extra Options ~ ~ S000-040 Safety Light Kit 564.00 14 C502-920 Crop Dividers 274.00 C502-740 HYD Cooler Factory Installed 4,509.00 C502-745 HYD Cooler Factory Crated 4,310.00 IMPORTANT: When moving equipment on any type of road, if the rotary cutter obscures the tractor warning or tail lights, the cutter must be equipped with the S000-040 Safety Light Kit PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-520 Rotary Cutter SPECIFICATIONS - Overall Width --- 247" (6.2m) - Transport Width --- 91" (2.32m) - Min. Tractor Size --- 100hp (75kw) - Overall Length --- 242" (6.15m) - Transport Height --- 120" (3.05m) - Blade Tip Speed --- 16,000 ft/min - Cutting Height --- 2" - 17.5" - Cutting Capacity --- 2" (51mm) - Blade Overlap --- 6" (153mm) (Depending on Tire Size) 2" (51mm) Fixed Knife - Deck Thickness --- 180" (7 ga) (4.6mm) - Cutting Width --- 240" (6.10m) 4" (102 mm) Pan Unit HOW TO ORDER: You must select from 1-6 to receive a complete rotary cutter including standard features. To receive additional options, choose from selection 7. Price CDN ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ Wt/kgs 1) C520-100 Basic 20' Unit, 1000 RPM 36,832.00 2,368 2) S000-080 Safety Light Kit (Required) 489.00 ~ ~ Selection 2 ~ Choose a Hitch Type and Accessories ~ ~ 2) C520-170 Trailing hitch, CV Style 1,226.00 81 Choose a Clevis: a) C502-113WG Solid Tongue 133.00 6 b) C502-107WG Open Clevis 121.00 5 c) C000-300WG Precision hitch 471.00 13 d) C000-360WG Adjustable Hitch 330.00 e) C502-816WG Solid Tongue with 2-3/16" hole for 2" pin 149.00 d) C502-815WG Clevis with 2 3/16" Opening 154.00 6 Choose a Tractor Shaft: a) 340-8092WG CV Shaft, 1 3/8" x 21 Spline 1,907.00 36 b) 340-8082WG CV Shaft, 1 3/4" x 20 Spline 1,920.00 36 3) C520-180 Parallel Ring hitch (For European Applications Only) 1,426.00 98 a) 340-5515WG Shaft, 1 3/8" x 6 with Over-Running Clutch 1,697.00 36 4) C520-175 High hitch (For Germany Only) 1,583.00 119 Choose a Tractor Shaft: a) 340-5510AWG CV Shaft, 1 3/8" x 21 Spline 1,401.00 36 b) 340-5511AWG CV Shaft, 1 3/4" x 20 Spline 1,430.00 36 Assembly charge on pan units Net 600.00 Assembly charge on fixed blade units Net 715.00 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-520 Rotary Cutter ~ ~ Selection 3 ~ Choose a Blade Configuration ~ ~ Price CDN Wt/kgs 1) C520-250 Pan Kit with Updraft Blades and Shrouds 3,349.00 283 2) C520-260 Pan Kit with Shredder Blades and Shrouds 3,716.00 345 3) C520-265 Fixed Knife Shredder Kit with Updraft Blades & Shrouds 5,129.00 438 4) C520-295 Fixed Knife Cotton Kit with Flat Blades & Shrouds 4,890.00 445 ~ ~ Selection 4 ~ Choose a Safety Guard and Accessories ~ ~ 1) C520-500 Single chains front and rear 1,417.00 154 a) C520-580 Half Length Front Belting (Must be used with a chain option) 294.00 14 2) C520-550 Double chains front and rear 1,924.00 307 a) C520-580 Half Length Front Belting (Must be used with a chain option) 294.00 14 IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown ~ ~ Selection 5 ~ Choose Axle and Tire Option ~ ~ 1) C520-612 Standard 318 Axle kit (Choose 4 Tires) 3,698.00 2) C520-614 517 Axle Kit c/w Center duals (choose 6 Tires) 4,017.00 3) C520-616 517 Axle Kit c/w Center Walking (choose 6 Tires) 4,287.00 4) C520-618 517 Dual Axle Kit (Choose 8 Tires) 4,707.00 5) C520-622 517 Walking Axle kit (Choose 8 Tires) 5,246.00 6) C520-624 517 Center Walking Axle c/w Duals on Wings (Choose 8 Tires) 4,977.00 ~ ~ Selection 6 ~ Choose Axle and Tire Option ~ ~ 7) 210-530WG Tire Assembly 11L Stubble Proof (Choose quanity of tires needed 4, 6 or 8) 633.00 8) 210-182NRWG Used Aircraft Tire (Choose quanity of tires needed 4, 6 or 8) 371.00 9) 210-505WG Light Truck Tire (Choose quanity of tires needed 4, 6 or 8) 337.00

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-520 Rotary Cutter ~ ~ Selection 7 ~ Choose a Destination Code ~ ~ Please select the destination of the cutter for proper Decals and Manuals. Price CDN 1) C520-NA North America and Australia Destination Kit 69.00 2) C520-UK United Kingdom Destination Kit 67.00 3) C520-FR France Destination Kit 87.00 5) C520-DE Germany Destination Kit 67.00 6) C520-RU Russia Destination Kit 67.00 7) C520-UA Ukraine Destination Kit 67.00 ~ ~ Selection 8 ~ Schulte Fan Kit ~ ~ 1) C520-780 Fan Debris Kit, Factory Installed 7,637.00 2) C520-790 Fan Debris Kit, Crated 7,418.00 ~ ~ Selection 9 ~ Extra Options ~ ~ 2) C520-920 Crop Divider 274.00 16 IMPORTANT: When moving equipment on any type of road, if the rotary cutter obscures the tractor warning or tail lights, the cutter must be equipped with the S000-080 Safety Light Kit PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER Wt/kgs 14

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-318 ROTARY CUTTER CUTTER FEATURES - North America's First 18' Flex Wing Mower - 540 Equal angle non cv drive - 540/1000 RPM 80⁰ CV Drive - Height Control Cylinder & Hoses - Replaceable Skid Shoes -Wing Lift Cylinders & Hoses - 7 ga Single Domed Deck and Stump Jumpers - 1.75" to 16.75" (44.5mm to 425mm) Cutting Height - Rubber 3 Puck Grommet Suspension - Operator's and Parts Manual Holder - 90 HP Recommended Tractor - Over Center Folding Wings - Cutting Width 216" (5.5m) - Transport Width (max with duals on wings) 96"(2.4m) more specs on brochure ~ ~ Selection 1 ~ Choose a Basic Unit, Drive Package ~ ~ Price CDN WT(kgs) C318-100 Schulte FX-318, Basic Unit 14,070.00 S000-085 Safety Light Kit (Required) 453.00 14 Choose a Drive Package: a) C318-735 Drive Package, CW Center, 540 RPM 5,899.00 in base b) C318-720 Drive Package, CW Center, 1000 RPM 5,899.00 in base Note: It using Equal Angle Hitch Skip to Selection 3 C185-195 Trailing Hitch, CV Style Required 848.00 Choose a CV Shaft: a) 340-870WG CV Shaft, 540 RPM 1,286.00 34 b) 340-648WG CV Shaft, 1000 RPM 1,054.00 27 c) 340-658WG CV Shaft 1000 RPM 1 3/4" shaft 1,440.00 27 Choose a Clevis ~ ~ Selection 2 ~ Trailing Hitch ~ ~ CS01-106WG Open Clevis (Minimum Requirments) 149.00 5 C000-360WG Adjustable Clevis 330.00 7 C000-300WG Precision hitch 471.00 13 C502-113WG Solid Tongue 133.00 6 ~ ~ Selection 3 ~ Equal Angle Clevis ~ ~ C185-196 Equal Angle Hitch Kit w/ 540 RPM Shaft c/w Non CV Drive Shaft 2,423.00 113 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-318 ROTARY CUTTER ~ ~ Selection 4 ~ Choose a Chain Guards ~ ~ C318-500 Chain Guards Single Front and Rear 978.00 C318-550 Chain Guards Double Front and Rear 1,384.00 C318-560 Front Half Belting (Must be used with a chain option) 334.00 C318-570 Rear Half Belting (Must be used with a chain option) 384.00 ~ ~ Selection 5 ~ Choose a Pan Kit ~ ~ C318-450 Pan Kit (required) 1,936.00 ~ ~ Selection 6 ~ Choose a Blade Configuration ~ ~ C318-460 Updraft Blades, CW Center 352.00 C318-470 Shredder Blades, CW Center (optional) 562.00 ~ ~ Selection 7 ~ Choose a Both Wheel Standard Kits ~ ~ C318-870 Wing Wheel Standard, 1 or 2 Tires Required 1,648.00 74 C180-115 Dual Wheel Standard on the Center Required 1,330.00 136 ~ ~ Selection 8 ~ Choose a Axle Kit ~ ~ C180-484 Axle Kit for 4 Tires 638.00 30 C180-486 Axle Kit for 6 Tires 957.00 45 C180-488 Axle Kit for 8 Tires 1,272.00 60 ~ ~ Selection 9 ~ Choose a Tire Option ~ ~ Please state the quantity of tires that you would like to order as the numbers listed below are single tires and not tire kits. 210-003WG Solid Laminated Tires, 6 x 9 x 20 239.00 32 210-175WG Forklift Tire 6.5 x 10-10 ply on 2 pce 5 bolt rim 352.00 18 210-520WG Tire 24x8-14 20 Ply Severe Duty 411.00 32 210-520FWG Tire 24x8-14 20 Ply Severe Duty Foam Filled 595.00 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-318 ROTARY CUTTER ~ ~ Selection 10 ~ Choose a Destination Code ~ ~ C318-NA North American & Australian Decal Kit 42.00 ~ ~ Selection 11 ~ Choose Extra Options ~ ~ C318-920 Crop Dividers (Used in Cotton) 272.00 Assembly Charge on Pan Units 150.00 PDI 150.00 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER IMPORTANT: 1) Safety Chain Kit must be used at all times when moving equipment on any type of road. 2) OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown Object Shield Message in the Rotary Cutter Spec section in sales price book.

S CANADIAN MACHINE PRICES AND SPECIFICATIONS Subject to GST Effective July 2, 2016 FX-315 ROTARY CUTTER STANDARD & OPTIONAL CUTTER FEATURES - 7GA deck - Residue distribution tailboard - Replaceable deck protection rings - Transport width of 99" - Variable position shrouding - Single domed, sweep clean deck - 4 gearbox drive layout - Fixed knife technology - Two piece replaceable skid shoes - Optional belting front or rear - Category 5 & 6 drivelines - Pentagon blade bolt design - Hyd Phasing lift system - Rubber suspension - standard - Optional dbl safety chains front or rear - 517 Hubs and axles - Speed levelling system - Full floating front hitch HOW TO ORDER: You must select from 1-8 to receive a complete rotary cutter including standard features. To receive additional options, choose from selection 9. ~ ~ Selection 1 ~ Choose a Basic Unit, Drive Package & Back Beam ~ ~ Price CDN Wt/kgs 1) C316-100 FX-315 Rotary Cutter 17,390.00 1,650 2) S000-095 Safety Light Kit 484.00 14 Choose a Drive Package: a) C306-705 Drive Package, CW Center, 540 RPM 6,228.00 b) C306-715 Drive Package, CW Center, 1000 RPM 6,223.00 Must Choose the Center Back Beam 1) C316-115 Standard Back Beam 1,685.00 101 ~ ~ Selection 2 ~ Choose a Hitch Type and Accessories ~ ~ 1) C316-180 Trailing CV hitch Kit 991.00 63 Choose a Clevis: a) CS01-106WG Open Clevis 149.00 5 b) C000-360WG Adjustable Clevis (Not Required with FLX15 or FLX10) 330.00 7 c) C000-300WG Precision hitch 471.00 13 d) C502-113WG Solid Tongue (Not Required with FLX15 or FLX10) 133.00 6 e) C502-815WG Clevis with 2 3/16" Opening 154.00 6 Choose a Tractor Shaft: a) 340-870WG CV Shaft, 540 RPM 1,286.00 34 b) 340-648WG CV Shaft, 1000 RPM 1,054.00 28 2) C316-185 Equal Angle Non-CV hitch Kit w/ 540 RPM Shaft 2,541.00 118 3) C316-196 Parallel Ring hitch 1,342.00 224 a) 230-015WG Pintle Ring, Forged,PT-48 (installed on Parallel hitch) 150.00 Choose Tractor Shaft b) 340-648WG CV Shaft, 1000 RPM 1,054.00 60 4) C316-195 German high hitch 1,791.00 270 a) 230-015WG Pintle Ring, Forged,PT-48 (installed on Parallel hitch) 150.00 Choose Tractor Shaft b) 340-648WG CV Shaft, 1000 RPM 1,054.00 62

S CANADIAN MACHINE PRICES AND SPECIFICATIONS FX-315 ROTARY CUTTER Subject to GST Effective July 2, 2016 ~ ~ Selection 3 ~ Choose a Skid ~ ~ Price CDN Wt/kgs 1) C316-215 Regular Skids 236.00 7 ~ ~ Selection 4 ~ Choose a Safety Guard Kit ~ ~ 1) C316-500 Chain Guards Double Front NOTE: Any combination of chains 1,020.00 127 2) C316-510 Chain Guards Double Rear & belting can be used 888.00 92 3) C316-550 Full Front Belting 437.00 51 NOTE: When ordering Residue 4) C316-560 Full Rear Belting Distribution Tailboard NO rear 307.00 40 guards are needed 5) C316-320 Residue Distribution Tailboard 2,583.00 147 (recommended with C316-460) IMPORTANT: Safety Tow Chain Kit must be used at all times when moving equipment on any type of road. IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown ObjectShield Information Message in the Rotary Cutter Spec Section in the sales price book.

S CANADIAN MACHINE PRICES AND SPECIFICATIONS FX-315 FX315 ROTARY CUTTER Subject to GST Effective July 2, 2016 ~ ~ Selection 5 ~ Choose Pan Kit or Fixed Knife Blade Configuration ~ ~ Price CDN 1) C316-450 Pan Kit 1,482.00 123 Choose a blade configuration a) C316-451 Updraft Blades, CW Center 347.00 35 b) C316-453 Shredder Blades, CW Center 582.00 64 Wt/kgs Optional a) C316-455 Bolt-On Deck Ring Option for Pan Kit 736.00 113 2) C316-460 Fixed Knife Bars, Blades (Updraft), Mounts, CW Rotation on Center 2,369.00 213 3) C316-220 Variable Position Shrouding (recommended with C316-460) 1,096.00 64 ~ ~ Selection 6 ~ Choose An Axle Kit ~ ~ 1) C316-484 Axle Kit for 4 Tires 687.00 36 2) C316-486 Axle Kit for 6 Tires 1,398.00 50 3) C316-488 Axle Kit for 8 Tires 2,110.00 66 ~ ~ Selection 7 ~ Choose A Tire Option ~ ~ 1) 210-003WG Solid Laminated Tire, 6 x 9 x 20 239.00 28 2) 210-520WG Tire 24x8-14 20 Ply Severe Duty 411.00 32 3) 210-520FWG Tire 24x8-14 20 Ply Severe Duty Foam Filled 595.00 4) 210-175WG Tire Assy, Forklift, 6.50x10-10 Ply Rated on 2pce 5 Bolt Rim 352.00 18 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

S CANADIAN MACHINE PRICES AND SPECIFICATIONS Subject to GST Effective July 2, 2016 FX-315 ROTARY CUTTER ~ ~ Selection 8 ~ Choose a Destination Code ~ ~ Please select the destination of the cutter for proper Decals, Manuals and CE Shielding Upgrade. Price CDN 1) C316-NA North American English Destination Kit 474.00 Wt/kgs 2) C316-FR France Destination Kit 612.00 3) C316-DE German Destination Kit 593.00 ~ ~ Selection 9 ~ Extra Options ~ ~ 1) C316-200 Chock Blocks 287.00 23 3) C316-205 Light Mount Plates, France 49.00 6 IMPORTANT: When moving equipment on any type of road, if the rotary cutter obscures the tractor warning or tail lights, the cutter must be equipped with the S000-095 Safety Light Kit Assembly Charge Net 150.00 Optional Factory PDI Net 150.00 OPTIONAL PDI INCLUDES: greasing of all pivot points, gearbox oil checked, charge hydraulic cylinders and install pioneer ends. Tires will be installed where necessary. It is the dealers responsibility to remove shipping brackets & banding as well as to adjust mower height as specified in the operators manual. Please go to the Schulte website/dealer access for further information. PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

S CANADIAN MACHINE PRICES AND SPECIFICATIONS Subject to GST Effective July 2, 2016 XH1500 Series 4 Rotary Cutter CUTTER FEATURES - 7GA deck - Single domed, sweep clean deck - S000-010 safety chain kit 1/4" grade 70 - Two piece replaceable skid shoes - Rubber suspension - standard with 10,000 lbs capacity - Double safety chains front & rear - Four gearbox drive layout - 1/4" Round skid pans (Stump Jumpers) - Walking axles on center section 210hp down, 260hp splitter c/w 6 updraft blades - Hydraulic phasing lift system - Full floating front hitch - Pentagon blade bolt design - Hydraulic wing lift system - Inboard rotation - Operator's manual in holder - 517 Hubs and axles - Deck protection rings HOW TO ORDER: You must select from 1-7 to receive a complete rotary cutter including standard features. To receive additional options, choose from selection 7. ~ ~ Selection 1 ~ Choose a Basic Unit and Drive Package ~ ~ Price CDN Wt/kgs 1) C308-100 Basic 15' Unit, S000-085 required in North America, but needed with FLX-151 21,547.00 2,175 2) S000-085 Safety Light Kit (Required) 453.00 Choose a Drive Package: a) C308-705 CW Rotation on Center, 540 RPM 6,096.00 b) C308-715 CCW Rotation on Center, 540 RPM 6,074.00 c) C308-700 CW Rotation on Center, 1000 RPM 5,942.00 d) C308-710 CCW Rotation on Center, 1000 RPM 5,928.00 ~ ~ Selection 2 ~ Choose a Hitch Type and Accessories ~ ~ 1) C308-195 Trailing Hitch CV Style 1,124.00 63 Choose a Clevis: a) CS01-106WG Open Clevis (Minimun Requirement) 149.00 5 b) C000-360WG Adjustable Clevis 330.00 7 c) C000-300WG Precision Clevis (not required with FLX-1510) 471.00 13 d) C502-113WG Solid tongue (not required with FLX-1510) 133.00 6 e) C502-815WG Clevis 2 3/16 " opening 154.00 6 Choose a Tractor Shaft: a) 340-870WG CV Shaft, 540 rpm 1,286.00 35 b) 340-648WG CV Shaft, 1000 rpm 1,054.00 27 c) 340-658WG CV Shaft 1000 RPM 1 3/4" shaft 1,440.00 27 2) C306-196 Trailing Equal Angl Hitch c/w 540 Tractor Shaft 2,556.00 118 (Not Available with FLX-1510)

S CANADIAN MACHINE PRICES AND SPECIFICATIONS XH1500 Series 4 Rotary Cutter Subject to GST Effective July 2, 2016 ~ ~ Selection 3 ~ Choose a Blade Configuration ~ ~ Price CDN Wt/kgs 1) C308-450 2 Blade Pan Kit - cw Schulte Super Suction Updraft 4" Blades 1,968.00 138 2) C308-451 2 Blade Pan Kit - ccw Schulte Super Suction Updraft 4" Blades 1,968.00 3) C308-452 2 Blade Pan Kit - cw Basic Suction Updraft 4" Blades 1,968.00 4) C308-453 2 Blade Pan Kit - ccw Basic Suction Updraft 4" Blades 1,968.00 5) C308-454 2 Blade Pan Kit - Bush Blades Non Updraft 2,086.00 6) C308-455 2 Blade Pan Kit - cw Schulte Super Suction Updraft 5" Blades 2,140.00 7) C308-456 2 Blade Pan Kit - cw Schulte Super Suction Updraft 5" Blades 2,122.00 ~ ~ Selection 4 ~ Choose a Wing Axle Kit ~ ~ 1) C308-870 Single Axles for Wings (6 Tires required) 1,690.00 73 2) C308-875 Walking Axles for Wings (8 Tires Required) 2,859.00 143 ~ ~ Selection 5 ~ Choose a Tire Option ~ ~ Please state the quantity of tires that you would like to order as the numbers listed below are just single tires and not a tire kit. Price USA Wt/lbs PRICE PER TIRE 1) 210-003WG Solid Laminated Tire, 6 x 9 x 20 239.00 32 2) 210-520WG Tire 24x8-14 20 Ply Severe Duty 411.00 32 3) 210-520FWG Tire 24x8-14 20 Ply Severe Duty Foamed Filled 595.00 4) 210-175WG Forklift Tire 6.5x10-10 Ply Rated 352.00 22 ~ ~ Selection 6 ~ Choose a Destination Package ~ ~ Please select the destination of the cutter for proper Decals, Manuals, and Shielding 1) C308-NA North American/ Australia Destination Kits 475.00

S CANADIAN MACHINE PRICES AND SPECIFICATIONS XH1500 Series 4 Rotary Cutter Subject to GST Effective July 2, 2016 ~ ~ Selection 7 ~ Extra Options ~ ~ Price CDN Wt/kgs 1) C306-300 Manual Winch Kit 784.00 52 2) C306-320 Towing Hitch Kit 404.00 30 3) C306-805 Three Spool Valve Kit (For tractors with limited remote outlets) 1,645.00 35 4) C306-815 Double Acting Cylinder Kit "TEE" Connection 295.00 2 5) C301-830 Hydraulic Hose Ends Kit (Pioneer Ends) 80.00 1 6) C306-835 Independent Double Acting Cylinder Kit 166.00 5 7) C306-840 Extra Long Hoses for Spool Valve Kit 552.00 22 8) C306-880 Right Wing Gauge Wheel Kit 681.00 46 9) C306-885 Left Wing Gauge Wheel Kit 681.00 46 10) C306-315 Tool Box Kit 716.00 15 11) C306-305 Flex Arm Mount 193.00 0 12) C308-890 Tire Bumper Kit 557.00 Assembly Charge Net 150.00 Optional Factory PDI Net 150.00 OPTIONAL PDI INCLUDES: greasing of all pivot points, gearbox oil checked, charge hydraulic cylinders and install pioneer ends. Tires will be installed where necessary. It is the dealers responsibility to remove shipping brackets & banding as well as to adjust mower height as specified in the operators manual. Please go to the Schulte website/dealer access for further information. IMPORTANT: When moving equipment on any type of road, if the rotary cutter obscures the tractor warning or tail lights, the cutter must be equipped with the S000-085 Safety Light Kit HYDRAULIC REQUIREMENTS FOR XH1500 A three circuit system provides independent lifting of each wing and height adjustment control, with float on two circuits. This system is preferred for optimum performance. If a three circuit system three spool valve kit is required - part #C306-805. PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

S CANADIAN MACHINE PRICES AND SPECIFICATIONS Eliminator Subject to GST Effective July 2, 2016 ELIMINATOR FEATURES - Chemical application spray kit for XH1500-50 US Gallon (189 Litres) Capacity Tank - Adjustable Flow rate (can be matched to the product you are using) - Great for brush and weed control - Monitor for speed, pressure and application rates - Reduce drift while mowing- Spraying is done unbder the deck ` ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ Price CDN 1) C306-685 Eliminator Spray Kit 11,475.00 Wt/kgs Factory Installation on XH1500 500.00 IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown ObjectShield Information Message in the Rotary Cutter Spec Section in the sales price book.

CANADIAN MACHINE PRICES AND SPECIFICATIONS XH1000 Series 4 Rotary Cutter Subject to GST Effective July 2, 2016 CUTTER FEATURES - 7GA deck - Single domed, sweep clean deck - S000-010 safety chain kit 1/4" grade 70 - Two piece replaceable skid shoes - Rubber suspension - standard with 10,000 lbs capacity - Double safety chains front & rear - Four gearbox drive layout - 1/4" Round skid pans (Stump Jumpers) - Walking axles on center section 190hp down, 260hp splitter c/w 6 updraft blades - Hydraulic phasing lift system - Full floating front hitch - Pentagon blade bolt design - Hydraulic wing lift system - Inboard rotation - Operator's manual in holder - 517 Hubs and axles - Deck protection rings HOW TO ORDER: You must select from 1-6 to receive a complete rotary cutter including standard features. To receive additional options, choose from selection 7. ~ ~ Selection 1 ~ Choose a Basic Unit and Drive Package~ ~ Price CDN Wt/kgs 1) C309-100 Basic 10' Unit 20,359.00 2112 2) S000-085 Safety Light Kit (Required) 453.00 Choose a Drive Package: a) C309-700 CW Rotation on Center, 540 RPM, (Std. Rotation) 4,370.00 b) C309-710 CW Rotation on Center, 1000 RPM (Std. Rotation) 4,349.00 c) C309-705 CCW Rotation on Center, 540 RPM (Non Std. Rotation) 4,204.00 d) C309-715 CCW Rotation on Center, 1000 RPM (Non Std. Rotation) 4,193.00 ~ ~ Selection 2 ~ Choose a Hitch Type and Accessories ~ ~ 1) C306-195 Trailing Hitch CV Style 1,025.00 63 Choose a Clevis: a) CS01-106WG Open Clevis (Minimum Requirement) 149.00 5 b) C000-360WG Adjustable Clevis 330.00 7 c) C000-300WG Precision Hitch (Not Required with FLX1510) 471.00 13 d) C502-113WG Solid Tongue (Not Required with FLX1510) 133.00 6 e) C502-815WG Clevis with 2 3/16" Opening 154.00 6 Choose a Tractor Shaft: a) 340-870WG CV Shaft, 540 RPM 1,286.00 35 b) 340-648WG CV Shaft, 1000 RPM 1,054.00 27 2) C306-196 Trailing Equal Angle Hitch c/w 540 Tractor Shaft 2,556.00 118 (Not Available with FLX1510) PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

CANADIAN MACHINE PRICES AND SPECIFICATIONS Subject to GST Effective July 2, 2016 XH1000 Series 4 Rotary Cutter ~ ~ Selection 3 ~ Choose a Blade Configuration ~ ~ Price CDN Wt/kgs 1) C309-450 2 Blade Pan kit - CW Schulte Super Suction Updraft 4" Blades 1,365.00 120 2) C309-451 2 Blade Pan kit - CCW Schulte Super Suction Updraft 4" Blades 1,365.00 3) C309-455 2 Blade Pan kit - CW Schulte Super Suction Updraft 5" Blades 1,485.00 4) C309-456 2 Blade Pan kit - CW Schulte Super Suction Updraft 5" Blades 1,463.00 ~ ~ Selection 4 ~ Choose a WIng Axle Kit ~ ~ 1) C309-870 Single Axle Kit for Right Wing 846.00 37 2) C309-875 Wing Walking Axle Kit for Right Wing 1,432.00 72 ~ ~ Selection 5 ~ Choose a Tire Option ~ ~ Please state the quantity of tires that you would like to order as the numbers listed below are single tires and not tire kits. PRICE PER TIRE 1) 210-003WG Solid Laminated Tire, 6 x 9 x 20 239.00 32 2) 210-520WG Tire 24x8-14 20 Ply Severe Duty 411.00 32 3) 210-520FWG Tire 24x8-14 20 Ply Severe Duty Foam Filled 595.00 4) 210-175WG Forklift Tire 6.5x10-10 Ply Rated 352.00 22 ~ ~ Selection 6 ~ Choose a Destination Code ~ ~ C309-NA North American/ Australia Destination Kits 475.00 ~ ~ Selection 7 ~ Extra Options ~ ~ 1) C306-300 Manual Winch 784.00 57 2) C306-320 Towing Hitch Kit 404.00 30 3) C306-805 Three Spool Valve Kit 1,645.00 30 4) C306-880 Right Wing Guage Wheel Kit 681.00 32 5) C306-315 Tool Box Kit 716.00 15 6) C306-305 Flex Arm Kit 193.00 6 7) C307-530 Front Belting 348.00 23 8) C302-830 Pioneer Ends 66.00 1 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

S CANADIAN MACHINE PRICES AND SPECIFICATIONS Subject to GST Effective July 2, 2016 XH1000 Series 4 Rotary Cutter IMPORTANT: Safety Tow Chain Kit must be used at all times when moving equipment on any type of road. IMPORTANT: When moving equipment on any type of road, if the rotary cutter obscures the tractor warning or tail lights, the cutter must be equipped with the S000-085 Safety Light Kit Assembly Charge Net 100.00 Optional Factory PDI Net 100.00 OPTIONAL PDI INCLUDES: greasing of all pivot points, gearbox oil checked, charge hydraulic cylinders and install pioneer ends. Tires will be installed where necessary. It is the dealers responsibility to remove shipping brackets & banding as well as to adjust mower height as specified in the operators manual. Please go to the Schulte website/dealer access for further information. PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-1800 ROTARY CUTTER CUTTER FEATURES - 540/1000 RPM Drive - 80 Degree CV Drive - 7 ga. Spun Formed Stump Jumpers - Height Control Cylinder & Hoses -Replaceable Skid Shoes -Wing Lift Cylinders & Hoses - 7 ga Single Domed Deck - S000-010 Safety Chain (1/4" gr.70-10000lbs cap.) - Deck Protection Rings - Operator's and Parts Manual Holder - Weasler Drive Lines with Self Adjusting Clutches - Over Center Folding Wings - Cutting Width 180" (4.57m) - Transport Width (max with duals on wings) 102"(2.59m more specs on brochure ~ ~ Selection 1 ~ Choose a Basic Unit, Drive Package ~ ~ Price CDN WT(kgs) C185-100 Schulte FX-1800, Basic Unit 11,161.00 1,550 S000-085 Safety Light Kit (Required) 453.00 Choose a Drive Package: a) C306-705 Drive Package, CW Center, 540 RPM 6,228.00 in base b) C306-715 Drive Package, CW Center, 1000 RPM 6,223.00 in base ~ ~ Selection 2 ~ Choose a Hitch Option ~ ~ C185-195 Trailing Hitch, CV Style 848.00 Choose a CV Shaft: a) 340-870WG CV Shaft, 540 RPM 1,286.00 34 b) 340-648WG CV Shaft, 1000 RPM 1,054.00 27 c) 340-658WG CV Shaft 1000 RPM 1 3/4" shaft 1,440.00 27 C185-196 Equal Angle Hitch Kit w/ 540 RPM Shaft 2,423.00 113 ~ ~ Selection 3 ~ Choose a Clevis ~ ~ CS01-106WG Open Clevis (Minimum Requirments) 149.00 5 C000-360WG Adjustable Clevis (not required with FLX10 or FLX15) 330.00 7 C000-300WG Precision hitch 471.00 13 C502-113WG Solid Tongue 133.00 6 ~ ~ Selection 4 ~ Choose a Center and The WIng Axle Kit ~ ~ C180-115 Duals Wheel Standard on Center OR 1,330.00 105 C180-125 Walking Tandems on center (6 Tires minimum) 2,449.00 136 C180-870 Single Axle Kit for Left and Right Wings (required) 991.00 74 Prices NOTE: and specifications (accomodates subject to 1 or change 2 tires) without notice or obligation. PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-1800 ROTARY CUTTER ~ ~ Selection 5 ~ Choose a Safety Guard ~ ~ C180-520 Chain Guards Single Front and Rear 781.00 94 C180-500 Chain Guards Double Front and Rear 1,114.00 140 ~ ~ Selection 6 ~ Choose a Pan Kit ~ ~ C316-450 Pan Kit (required) 1,482.00 123 ~ ~ Selection 7 ~ Choose a Blade Configuration ~ ~ C316-451 Blades, CW Center 347.00 35 C316-453 Shredder Blades, CW Center 582.00 65 ~ ~ Selection 8 ~ Choose a Axle Kit ~ ~ C180-484 Axle Kit for 4 Tires 638.00 30 C180-486 Axle Kit for 6 Tires 957.00 45 C180-488 Axle Kit for 8 Tires 1,272.00 60 ~ ~ Selection 9 ~ Choose a Tire Option ~ ~ Please state the quantity of tires that you would like to order as the numbers listed below are single tires and not tire kits. 210-003WG Solid Laminated Tires, 6 x 9 x 20 239.00 32 210-175WG Forklift Tire 6.5 x 10-10 ply on 2 pce 5 bolt rim 352.00 18 210-520WG Tire 24x8-14 20 Ply Severe Duty 411.00 32 210-520FWG Tire 24x8-14 20 Ply Severe Duty Foam Filled 595.00 ~ ~ Selection 10 ~ Choose a Destination Code ~ ~ C185-NA North American & Australian Decal Kit 42.00 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

Subject to GST CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX1800 ROTARY CUTTER ~ ~ Selection 11 ~ Choose Extra Options ~ ~ S000-085 Safety Light Kit 453.00 14 C185-304 Strut Mount for Flex Arm,(Factory Installed) 705.00 11 C185-305 Strut Mount for Flex Arm, (parts only) 194.00 11 C185-325 Tension Link Leveling Rod, Factory Installed 245.00 19 C185-330 Tension Link Leveling Rod, Weld on Parts only 247.00 19 C185-310 Hose Kit, independent wing-lift 203.00 5 Assembly Charge on Pan Units 150.00 PDI 150.00 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER IMPORTANT: 1) Safety Chain Kit must be used at all times when moving equipment on any type of road. 2) OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown Object Shield Message in the Rotary Cutter Spec section in sales price book.

CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-1200 ROTARY CUTTER CUTTER FEATURES - 540/1000 RPM Drive - 80 Degree CV Drive - 7 ga. Spun Formed Stump Jumpers - Height Control Cylinder & Hoses -Replaceable Skid Shoes -Wing Lift Cylinders & Hoses - 7 ga Single Domed Deck - S000-010 Safety Chain (1/4" gr.70-10000lbs cap.) - Deck Protection Rings - Operator's and Parts Manual Holder - Weasler Drive Lines with Self Adjusting Clutches - Over Center Folding Wings - Cutting Width 126" (3.20m) - Transport Width (max with duals on wings)97.5"(2.47m) more specs on brochure ~ ~ Selection 1 ~ Choose a Basic Unit, Drive Package ~ ~ Price CDN WT(lbs) C195-100 FX1200, Basic Unit 11,470.00 2,206 S000-085 Safety Light Kit (Required) 453.00 DRIVE PACKAGE (choose one) C307-700 CW Rotation on Center, 540 RPM 4,564.00 in base C307-710 CW Rotation on Center, 1000 RPM 4,569.00 in base ~ ~ Selection 2 ~ Choose a Hitch Option ~ ~ C185-195 Trailing Hitch, CV Style 848.00 93 Choose a CV Shaft: a) 340-870WG CV Shaft, 540 RPM 1,286.00 34 b) 340-648WG CV Shaft, 1000 RPM 1,054.00 100 C185-196 Equal Angle Hitch Kit w/ 540 RPM Shaft 2,423.00 113 ~ ~ Selection 3 ~ Choose a Clevis ~ ~ CS01-106WG Open Clevis (Minimum Requirments) 149.00 5 C000-360WG Adjustable Clevis 330.00 7 C000-300WG Precision hitch 471.00 13 C502-113WG Solid Tongue 133.00 6 ~ ~ Selection 4 ~ Choose a WIng Axle Kit ~ ~ C190-870 Single Axle Kit for Left and Right Wings (required) 498.00 38 (accomodates 1 or 2 tires) C180-115 Duals Wheel Standard on Center OR 1,330.00 105 C180-125 Walking Tandems on center (6 Tires minimum) 2,449.00 136 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-1200 ROTARY CUTTER ~ ~ Selection 5 ~ Choose a Safety Guard ~ ~ Price CDN WT(lbs) C190-520 Chain Guards Single Front & Rear 542.00 62 C190-500 Chain Guards Double Front & Rear 766.00 93 ~ ~ Selection 6 ~ Choose The Pan Kit ~ ~ C317-450 Pan Kit (required) 1,020.00 86 ~ ~ Selection 7 ~ Choose a Blade Configuration ~ ~ C317-451 Updraft Blades, CW Center 234.00 32 C317-453 Shredder Blades, CW Center 363.00 52 ~ ~ Selection 8 ~ Choose a Axle Kit ~ ~ C190-483 Axle Kit for 3 Tires 480.00 23 C190-485 Axle Kit for 5 Tires 795.00 38 C180-486 Axle Kit for 6 Tires 957.00 45 ~ ~ Selection 9 ~ Choose a Tire Option ~ ~ Please state the quantity of tires that you would like to order as the numbers listed below are single tires and not tire kits. 210-003WG Solid Laminated Tires, 6 x 9 x 20 239.00 32 210-175WG Tire Assy, Forklift, 6.5 x 10-10 ply on 2 pce 5 bolt rim 352.00 34 210-520WG Tire 24x8-14 20 Ply Severe Duty 411.00 32 210-520FWG Tire 24x8-14 20 Ply Severe Duty Foam Filled 595.00 ~ ~ Selection 10 ~ Choose a Destination Code ~ ~ C195-NA North American & Australian Decal Kit 35.00 PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

CANADIAN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 FX-1200 ROTARY CUTTER ~ ~ Selection 11 ~ Choose a Extra Options ~ ~ S000-085 Safety Light Kit 453.00 14 C185-304 Strut Mount for Flex Arm,(Factory Installed) 705.00 11 C185-305 Strut Mount for Flex Arm, (parts only) 194.00 11 C185-325 Tension Link Leveling Rod, Factory Installed 245.00 19 C185-330 Tension Link Leveling Rod, Weld on Parts only 247.00 19 Assembly Charge NET 100.00 Optional Factory PDI NET 100.00 IMPORTANT: 2) PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown Object Shield Message in the Rotary Cutter Spec section in sales price book.

S CANADIAN MACHINE PRICES AND SPECIFICATIONS Subject to GST Effective July 2, 2016 V1280 Rotary Cutter CUTTER FEATURES - 540 RPM Drive line - 80 degree CV joint to tractor - Spring steel bushings - Round skid pans - 12.5L x 15 tires, center section - Rear counterbalance springs - Replaceable skid shoes - Aircraft tires on wings - S000-010 safety chain kit 1/4" grade 70-10 GA Deck - Height control cylinder with hoses with 10,000 lbs capacity - Heavy duty slip clutches - Wing lift cylinder with hoses - Operator's manual in holder - Deck protection rings - Laminated rubber shielding - Rear Mounted Center Rotor HOW TO ORDER: You must select from 1 and 2 to receive a complete rotary cutter including standard features. To receive additional options, choose from selection 3. ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ Price CDN Wt/kgs 1) CS01-000 Basic 12' Unit, 540 RPM 34,596.00 1,750 ~ ~ Selection 2 ~ Choose a Hitch Type ~ ~ 1) CS01-106WG Open Clevis 149.00 5 2) C000-300WG Precision hitch 471.00 13 ~ ~ Selection 3 ~ Extra Option ~ ~ 1) S000-045 Safety Light Kit 531.00 14 IMPORTANT: Safety Chain Kit must be used at all times when moving equipment on any type of road. or tail lights, the cutter must be equipped with the S000-045 Safety Light Kit IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown ObjectShield Information Message in the Rotary Cutter Spec Section in the sales price book. PREDELIVERY SERVICE IS REQUIRED BY DEALER OR END USER

S CANADIAN MACHINE PRICES AND SPECIFICATIONS FLX-1510 FLEX ARM Effective July 2, 2016 - New heavy duty 11l x 15, 2 ply tires, load cap. Of 4000 lbs - Opt. 6 port selector valve kit for independent - Cut dirctly in-line with the tractor or at any offset distance upto 122" wing action or limited tractor hydraulic outlets - 6000 lb capacity, 6 bolt hubs - Continuous power rating 200hp @ 1000rpm - Spring steel bushings, induction harden pins at major pivot points - Bolt in replacement axles - Minimum of 3 hydraulic circuits required to operate with 15' or 10' mow- Safety light kit - Heavy duty 3-1/2 x 36 welded hydraulic cylinder - Operator's manual in holder HOW TO ORDER: Selection 1 will g` To receive additional options, choose from selection 2. FLEX ARM FEATURES ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ Price CDN Wt/kgs 1) A105-000 FLX 1510 Flexarm 25,560.00 1,850 ~ ~ Selection 2 ~ Extra Options ~ ~ 1) A105-350 Six Port Selector Valve Kit for Independent Wing 1,578.00 11 Actions with Limited Tractor Hydraulics (Fits FLX-1510) 2) A105-360 Hose kit for independent wing lift- Tractors with 4 valve banks 241.00 When choosing this opt. you will require a C306-835 (Independent Double Acting Cylinder Kit) * C306-835 Independent Double Acting Cylinder Kit 166.00 Assembly $100.00 Factory PDI $100.00 IMPORTANT: OSHA, ASAE, SAE, and ANSI standards REQUIRE the use of Chain Guards, Deflectors, or Solid Skirts/Bands at all times. Schulte recommends mower be equipped with deflectors or double chain guards for all mowing purposes. Single chain guards may be used for agricultural purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing. Before ordering a mower, read the Thrown ObjectShield Information Message in the Rotary Cutter Spec Section in the sales price book.

CDN MACHINE PRICES AND SPECIFICATIONS FX-209 Rotary Cutter Effective July 2, 2016 - Push or pull capability - Gearbox Rating 210 hp - 9ft / 3m overall width - Two rotor base unit common to all configuration - Cutting Height: 2" - 13" (5.1 cm - 33 cm) - Pans with Schulte Super Suction Blades - Cutting Width: 109.25" (2.78 m) - Double Chain Front & Rear - Cutting Capacity: 3" (7.6 cm) - 7 Ga Deck - Minimum Tractor HP 50 HP ( 37.3 kw) - 540 and 1000 RPM drive options - Cat. II & III 3 Point / Semi Mount Swing (13 left or right swing), Trailing Pull Price CDN C209-100 FX-209 Base Unit 8,093.00 Choose One Mount CUTTER FEATURES - ALL HITCH TYPES ~ ~ Selection 1 ~ Choose a FX-209 Base Unit ~ ~ ~ ~ Selection 2 ~ Choose a FX-209 Non Trailing Configuration ~ ~ C209-300 3PT Mount Option or 1,930.00 C209-360 Semi Mount Swing or 3,426.00 C209-370 Semi Mount 1,390.00 Choose One Drive Package C209-710 540 RPM Drive Package NON-TRAILING or 2,155.00 C209-715 1000 RPM Drive Package NON-TRAILING 1,926.00 C209-720 Front Frame Pushing 540 RPM Drive (only to be used with 2,893.00 FM-115 or FM350 -- Front mount 3pt frame Not needed with Tractor front 3pt system) Choose One Wheel Assembly C209-400 FX-209 Wheel Assembly Non-Trailing Standard or 1,530.00 C209-450 FX-209 Wheel Assembly Non-Trailing Hydraulic 2,223.00 ~ ~ Selection 3 ~ Choose a FX-209 Trailing Hitch Configuration ~ ~ C209-340 FX-209 Trailing Hitch 3,526.00 CS01-106WG Open Clevis (Minimum Requirement) or 149.00 C000-360wg Adjustable Clevis or 330.00 C000-300WG Precision Hitch or 471.00 C502-113WG Solid Tongue 133.00 Choose One Drive Package C209-700 540 RPM Drive Package Trailing or 3,714.00 C209-705 1000 RPM Drive Package Trailing 3,390.00 Wt/kgs

CDN Effective July 2, 2016 FX-209 Rotary Cutter ~ ~ Selection 4 ~ Choose Options ~ ~ Price CDN C209-250 BLADE PAN OPTION (Must Pick) 1,156.00 C209-520 HALF LENGTH BELTING OPTION (Front and Back) 250.00 Wt/kgs ~ ~ Selection 5 ~ Choose Tire Options ~ ~ (CHOOSE 2 TIRES PER UNIT) 210-003WG Solid Laminated Tires, 6 x 9 x 20 239.00 210-520WG Tire 24x8-14 20 Ply Severe Duty 411.00 210-520FWG Tire 24x8-14 20 Ply Severe Duty Foam Filled 595.00 210-175WG Forklift New, 6.5 x 10-10 ply rated on 2 pcs 5 bolt rim 352.00

CDN MACHINE PRICES AND SPECIFICATIONS FX-107 Rotary Cutter Effective July 2, 2016 CUTTER FEATURES - ALL HITCH TYPES - Rigid single domed 7 gauge deck construction - Pull type and 3 point hitching options - Overall width: 95.5" ( 2.43 m) - Base unit common to all configurations - Cutting Height: 3" - 12 7/8" (7.6 cm - 33 cm) - 540 RPM drive - Cutting Width: 84" (2.13 m) - Double Chain Front & Rear - Cutting Capacity: 3" (7.6 cm) - 7 Ga Deck - Minimum Tractor HP 50 HP ( 37.3 kw) - Pull type unit has the ability to accept open - Cat. II & III 3 Point / Trailing Pull clevis, solid tongue, adjustable clevis ~ ~ Selection 1 ~ Choose a Base Unit ~ ~ Price CDN C107-100 FX-107 Base Unit 5,485.00 ~ ~ Selection 2 ~ Choose a 3 Point Option Configuration ~ ~ C107-300 3PT Mount Option (if this choosen skip Trailing Hitch Option) 2,700.00 ~ ~ Selection 3 ~ Choose a Trailing Hitch Configuration ~ ~ C107-195 Trailing Hitch 4,526.00 CS01-106WG Open Clevis (Minimum Requirement) or 149.00 C000-360wg Adjustable Clevis or 330.00 C000-300WG Precision Hitch or 471.00 C502-113WG Solid Tongue 133.00 ~ ~ Selection 4 ~ Blade Pan Option ~ ~ C107-250 BLADE PAN OPTION (Must Pick) 772.00 Wt/kgs ~ ~ Selection 5 ~ Choose Tire Options ~ ~ 210-003WG (CHOOSE 2 TIRES PER UNIT) Solid Laminated Tires, 6 x 9 x 20 239.00 210-520WG Tire 24x8-14 20 Ply Severe Duty 411.00 210-520FWG Tire 24x8-14 20 Ply Severe Duty Foam Filled 595.00 210-175WG Forklift New, 6.5 x 10-10 ply rated on 2 pcs 5 bolt rim 352.00

CDN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 RDX-117 SNOW BLOWER RDX-117 Snow Blower Specs: Cutting Width: 117" Tractor HP: 140-220 HP Cutting Height: 45.5" Lower Auger Diameter: 23" Upper Auger Diameter: 14" Adjustable, replacable skid shoes Replaceable Cutting Blade Gear Driven Rotator High molecular plastic chute rotating surface Double chute deflector on HD and Truck loading chutes Fan Diameter: 38" Capacity - Dry Snow / Wet Snow Fan Type: 5 Paddle 762 tons per hr / 2394 per hr Drive: 1000 RPM ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ Retail Price Weight (kg) B118-000 RDX-117 (117" Snow Blower) 18,257.00 966 330-655WG Standard Gearbox (tractors with cw pto rotation) 3,916.00 79 330-655R Non-standard Gearbox (tractors with ccw pto rotation) 4,165.00 79 340-926WG 1-3/4 Z20 (size 9) for SDX-117 / RDX-117 747.00 24 340-925WG 1-3/8 Z21 (size 9) for SDX-117 / RDX-117 748.00 24 NOTE : Do not order above shaft if going on a Front Mount Instead, order from FM350 price sheet ~ ~ Selection 2 ~ Choose a Gear Box ~ ~ ~ ~ Selection 3 ~ Choose a Power Shaft ~ ~ 1. Factory Assembly Charge: $50 2. Predelivery service is $50.00 or required to be carried out by the Dealer or end user. 3. Prices are subject to change without notice or obligation.

CDN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 RDX-117 SNOW BLOWER ~ ~ Selection 4 ~ Choose a Chute kit ~ ~ Retail Price Weight (kg) B110-270 Heavy Duty Chute Kit with Dbl Chute Deflector 1,403.00 70 B840-250 Cylinder Kit for B110-270 (Required) 509.00 12 B110-280 Truck Loading Chute Kit with Dbl Chute Deflector 1,873.00 114 B110-260 Cylinder Kit for B110-280 (Required) 516.00 14 NOTE: Cylinder kits are complete with 2" x 6" cylinder & hoses B890-300WG Gauge Wheels with Tapered Roller Bearings 1,267.00 50 1. Factory Assembly Charge: $50 2. Predelivery service is $50.00 or required to be carried out by the Dealer or end user. 3. Prices are subject to change without notice or obligation.

CDN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 SDX-117 SNOW BLOWER SDX-117 Snow Blower Specs: Cutting Width: 117" Tractor HP: 140-220 HP Cutting Height: 45.5" Lower Auger Diameter: 23" Upper Auger Diameter: 14" Adjustable, replacable skid shoes Replaceable Cutting Blade Gear Driven Rotator High molecular plastic chute rotating surface Double chute deflector on HD and Truck loading chutes Fan Diameter: 38" Capacity - Dry Snow / Wet Snow Fan Type: 5 Paddle 762 tons per hr / 2394 per hr Drive: 1000 RPM ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ Retail Price Weight (kg) B117-000 SDX-117 (117" Snow Blower) 13,004.00 966 330-655WG Standard Gearbox (tractors with cw pto rotation) 3,916.00 79 330-655R Non-standard Gearbox (tractors with ccw pto rotation) 4,165.00 79 340-926WG 1-3/4 Z20 (size 9) for SDX-117 / RDX-117 747.00 24 340-925WG 1-3/8 Z21 (size 9) for SDX-117 / RDX-117 748.00 24 NOTE : Do not order above shaft if going on a Front Mount Instead, order from FM350 price sheet ~ ~ Selection 2 ~ Choose a Gear Box ~ ~ ~ ~ Selection 3 ~ Choose a Power Shaft ~ ~ 1. Factory Assembly Charge: $50 2. Predelivery service is $50.00 or required to be carried out by the Dealer or end user. 3. Prices are subject to change without notice or obligation.

CDN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 SDX-117 SNOW BLOWER ~ ~ Selection 4 ~ Choose a Chute kit ~ ~ Retail Price Weight (kg) B110-270 Heavy Duty Chute Kit with Dbl Chute Deflector 1,403.00 70 B840-250 Cylinder Kit for B110-270 (Required) 509.00 12 B110-280 Truck Loading Chute Kit with Dbl Chute Deflector 1,873.00 114 B110-260 Cylinder Kit for B110-280 (Required) 516.00 14 NOTE: Cylinder kits are complete with 2" x 6" cylinder & hoses B890-300WG Gauge Wheels with Tapered Roller Bearings 1,267.00 50 1. Factory Assembly Charge: $50 2. Predelivery service is $50.00 or required to be carried out by the Dealer or end user. 3. Prices are subject to change without notice or obligation.

CDN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 RDX-102 SNOW BLOWER RDX-102 Snow Blower Specs: Cutting Width: 102" Tractor HP: 85-140 HP (63-104 kw) Cutting Height: 37" Overall Height: 100" Auger Diameter: 23" Adjustable, replacable skid shoes Replaceable Cutting Blade Gear Driven Rotator High molecular plastic chute rotating surface Double chute deflector on HD and Truck loading chutes Fan Diameter: 30" Capacity - Dry Snow / Wet Snow Fan Type: 4 Paddle 426 tons per hr / 1343 per hr PTO Speed; 540 or 1000 RPM ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ Retail Price Weight (kg) B103-000 RDX-102 (102" Rotating Drum Snow Blower) 12,790.00 966 340-924WG Size 9 Heavy Duty PTO Shaft 540 RPM 747.00 24 340-927WG Size 9 Heavy Duty PTO Shaft (for TV-145 Engine End) 540 RPM 771.00 24 Optional Gear Gbox B102-175 1000 RPM Gear Box STANDARD 1,812.00 B102-175R 1000 RPM Gear Box CCW 2,055.00 Power Shaft for 1000 RPM Gear Box 340-928WG 1-3/8 21 Spline sahft 1000 RPM 825.00 NOTE : Do not order above shaft if going on a Front Mount Instead, order from FM350 price sheet ~ ~ Selection 2 ~ Choose a Power Shaft ~ ~ ~ ~ Selection 3 ~ Choose a Chute Kit ~ ~ B110-270 Heavy Duty Chute Kit with Dbl Chute Deflector 1,403.00 71 B840-250 Cylinder Kit for B110-270 (Required) 509.00 13 B110-280 Truck Loading Chute Kit with Dbl Chute Deflector 1,873.00 114 B110-260 Cylinder Kit for B110-280 (Required) 516.00 14 NOTE: Cylinder kits are complete with 2" x 6" cylinder & hoses 1. Factory Assembly Charge: $50 2. Predelivery service is $50.00 or required to be carried out by the Dealer or end user. 3. Prices are subject to change without notice or obligation. B890-300WG Gauge Wheels with Tapered Roller Bearings 1,267.00 23

CDN MACHINE PRICES AND SPECIFICATIONS Effective July 2, 2016 SDX-102 SNOW BLOWER SDX-102 Snow Blower Specs: Cutting Width: 102" Adjustable, replacable skid shoes Drive: 540 or 1000 RPM Replaceable Cutting Blade Cutting Height: 35" Gear Driven Rotator Overall Height: 96" Hydraulic Chute Rotation Auger Diameter: 23" Capacity Dry Snow/Wet Snow Fan Diameter: 30" 388 Tons per hr / 1222 tons per hr Fan Type: 4 Paddle Tractor HP: 85-140 HP (63-104 kw) ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ Retail Price Weight (kgs) B102-000 SDX102 Standard Drum Snow Blower 8,875.00 680 ~ ~ Selection 2 ~ Choose a Power Shaft ~ ~ 340-924WG Size 9 Heavy Duty PTO Shaft 540 RPM 747.00 20 340-927WG Size 9 Heavy Duty PTO Shaft (for TV-145 Engine End) 540 RPM 771.00 20 Optional Gear Gbox B102-175 1000 RPM Gear Box STANDARD 1,812.00 B102-175R 1000 RPM Gear Box CCW 2,055.00 Power Shaft for 1000 RPM Gear Box 340-928WG 1-3/8 21 Spline sahft 1000 RPM 825.00 NOTE : Do not order above shaft if going on a Front Mount Instead, order from FM350 price sheet ~ ~ Selection 3 ~ Choose a Chute Kit ~ ~ B110-270 Heavy Duty Chute Kit with Dbl Chute Deflector 1,403.00 70 B840-250 Cylinder Kit for B110-270 (Required) 509.00 113 B110-280 Truck Loading Chute Kit with Dbl Chute Deflector 1,873.00 B110-260 Cylinder Kit for B110-280 (Required) 516.00 NOTE: Cylinder kits are complete with 2" x 6" cylinder & hoses 1. Factory Assembly Charge: $50 2. Predelivery service is $50.00 or required to be carried out by the Dealer or end user. 3. Prices are subject to change without notice or obligation.

Effective July 2, 2016 CDN MACHINE PRICES AND SPECIFICATIONS SDX-102 SNOW BLOWER ~ ~ Selection 4 ~ Choose a Extra Options ~ ~ Weight (kgs) 27 Retail Price 23 B960-260 3pt Extension Kit - no shaft incl. 823.00 B890-300WG Gauge Wheels with Tapered Roller Bearings 1,267.00 1. Factory Assembly Charge: $50 2. Predelivery service is $50.00 or required to be carried out by the Dealer or end user. 3. Prices are subject to change without notice or obligation.

CDN MACHINE PRICES AND SPECIFICATIONS SDX-840 SNOW BLOWER Effective July 2, 2016 Cutting Width: 84" Tractor HP: 55-95 HP Adjustable, replacable skid shoes Cutting Height: 30" Replaceable Cutting Blade Overall Height: 78" Gear Driven Rotator Auger Diameter: 18" Hydraulic Chute Rotation Fan Diameter: 26" Capacity Dry Snow/Wet Snow Fan Type: 4 Paddle 258 Tons per hr / 810 tons per hr Drive: 540 RPM ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ Retail Price Weight (kgs) B840-000 SDX-840 Snow Blower with Chute 8,166.00 474 ~ ~ Selection 2 ~ Choose a Power Shaft ~ ~ 340-924WG Heavy Duty PTO Shaft (Size 9) 747.00 16 ~ ~ Selection 3 ~ Choose a Extra Options ~ ~ B840-250 Hyd Cylinder Kit for Chute Deflector (2"x6" cyl & hoses) 509.00 18 B701-260 3Point Extension Kit ( No Shaft Included) 648.00 50 B890-290WG Gauge Wheels with Tapered Roller Bearings 1,455.00 23 B965-115 Manual Chute Bar for Chute Deflector 99.00 2 ` 1. Factory Assembly Charge: $50 2. Predelivery service is $50.00 or required to be carried out by the Dealer or end user. 3. Prices are subject to change without notice or obligation.

CDN MACHINE PRICES and SPECIFICATIONS Effective July 2, 2016 FM-350 Front Mount 3pt Hitch Frame FM-350 Specs: Tractor HP: 85 HP - 250 HP Tractor PTO - 1000 rpm for SDX-117 and SDX-102 Adjustment: Accommodates tractors between 151" and 540 rpm for SDX-102 only 211" measured from mount plate to drawbar pin Lift Capacity : 5000 lbs Nominal Ground Clearance - 13" depending on tractor installation Nominal Lift Range - 18" Weight - 1650 lbs ~ ~ Selection 1 ~ Choose a Basic Unit ~ ~ RETAIL PRICE WEIGHT (kgs) F350-100 FM-350 Front Mount Frame (NO Driveline Package) 6,300.00 750 Used for SV 3pt V-BLADE (must choose for all attactments) Includes 2 hydraulic banks for operation F350-200 Driveline package (Used for Snow Blowers) 3,959.00 ~ ~ Selection 2 ~ Choose Gear Box ~ ~ F250-310 1:1 Rear Gear Box 2,590.00 45 Select when connecting a 1000 RPM PTO tractor to a SDX-117 or RDX-117 or when connecting a 540 RPM PTO tractor to a SDX-102 or RDX-102 snow blower F250-300 1000 to 540 RPM Rear Reduction Gearbox 2,423.00 45 Select when connecting a 1000 RPM PTO tractor to a SDX-102 or RDX-102 ~ ~ Selection 3 ~ Choose REAR TRACTOR SHAFT ~ ~ NOTE: Power delivered from a 1,000 RPM tractor only 340-662WG 1-3/8 Z21 for SDX-102 / RDX-102 673.00 16 340-663WG 1-3/4 Z20 for SDX-102 / RDX-102 560.00 16 340-925WG 1-3/8 Z21 (Size 9) for SDX-117 / RDX-117 748.00 24 340-926WG 1-3/4 Z20 (size 9) for SDX-117 / RDX-117 747.00 24 NOTE: Power delivered from a 540 RPM tractor only 340-924WG 1-3/8 Z6 for SDX-102 / RDX-102 747.00 20 1. Factory Assembly Charge: Call for Price 2. Prices are subject to change without notice or obligation.

ver 07022016MM MASTER PRICE SHEET CDN MACHINE PRICES and SPECIFICATIONS Effective July 2, 2016 FM-350 Front Mount 3pt Hitch Frame ~ ~ Selection 4 ~ Choose Hydraulic Bank~ ~ RETAIL PRICE WEIGHT (kgs) F300-410 Hydraulic Bank and Mount, Single 407.00 23 Required for drum rotation on RDX-102 / RDX-117 Tractor Mount ~ ~ Selection 5 ~ Choose Options ~ ~ *Please contact us for tractor mount options & availability 600.00 1. Factory Assembly Charge: Call for Price 2. Prices are subject to change without notice or obligation.