FIXED WINDOW SCALE " = '-0" FIXED WINDOW SECTION PROFILE @ HEAD SCALE '-0" = '-0" FIXED WINDOW SECTION PROFILE @ JAMB SCALE '-0" = '-0" FIXED WINDOW SECTION PROFILE @ SILL SCALE '-0" = '-0" NAO84 STEEL REINFORCEMENT @ FRAME SCALE '-6" = '-0" FIXED WINDOW SECTION DETAILS 08 OF 9
CASEMENT WINDOW HOPPER WINDOW CASEMENT WITH TILT OPTION WINDOW SCALE " = '-0" SCALE " = '-0" SCALE " = '-0" OPERABLE WINDOW SECTION PROFILE @ HEAD SCALE '-0" = '-0" OPERABLE WINDOW SECTION PROFILE @ JAMB SCALE '-0" = '-0" OPERABLE WINDOW SECTION PROFILE @ SILL SCALE '-0" = '-0" NAC84 STEEL REINFORCEMENT @ SASH SCALE '-6" = '-0" OPERABLE WINDOW SECTION DETAILS 08 OF 9
95mm INTEGRAL MULLION SECTION PROFILE FIXED TO FIXED WINDOW SCALE 9" = '-0" 95mm INTEGRAL MULLION SECTION PROFILE FIXED TO OPERABLE WINDOW SCALE 9" = '-0" 95mm INTEGRAL MULLION SECTION PROFILE OPERABLE TO OPERABLE WINDOW SCALE 9" = '-0" 95mm INTEGRAL MULLION SECTION PROFILE W/ DBL. STEEL REINFORCEMENT FIXED TO FIXED WINDOW SCALE 9" = '-0" 95mm INTEGRAL MULLION SECTION PROFILE W/ DBL. STEEL REINFORCEMENT FIXED TO OPERABLE WINDOW SCALE 9" = '-0" 95mm INTEGRAL MULLION SECTION PROFILE W/ DBL. STEEL REINFORCEMENT OPERABLE TO OPERABLE WINDOW SCALE 9" = '-0" NA44 (LEFT) NA47 (RIGHT) STEEL REINFORCEMENT SCALE '-6" = '-0" 0mm INTEGRAL MULLION SECTION PROFILE FIXED TO FIXED WINDOW SCALE 9" = '-0" 0mm INTEGRAL MULLION SECTION PROFILE FIXED TO OPERABLE WINDOW SCALE 9" = '-0" 0mm INTEGRAL MULLION SECTION PROFILE OPERABLE TO OPERABLE WINDOW SCALE 9" = '-0" NAT84 STEEL REINFORCEMENT SCALE '-6" = '-0" INTEGRAL MULLION SECTION DETAILS - IMPORTANT! INTEGRAL MULLIONS NOT AVAILABLE FOR AWNING WINDOWS. REFER TO KP MULLIONS. 08 OF 9
KP MULLION SECTION PROFILE KP MULLION SECTION PROFILE KP MULLION SECTION PROFILE FIXED TO FIXED WINDOW SCALE 9" = '-0" FIXED TO OPERABLE WINDOW SCALE 9" = '-0" OPERABLE TO OPERABLE WINDOW SCALE 9" = '-0" SCALE KP5 MULLION SECTION PROFILE FIXED TO FIXED WINDOW SCALE 9" = '-0" KP5 MULLION SECTION PROFILE FIXED TO OPERABLE WINDOW SCALE 9" = '-0" KP5 MULLION SECTION PROFILE OPERABLE TO OPERABLE WINDOW 9" = '-0" STEEL REINF. 80X0 @ SCALE '-6" = '-0" KP5 MULLION STEEL REINF. NA/7 @ SCALE '-6" = '-0" KP/4 MULLION SCALE KP/4 MULLION SECTION PROFILE FIXED TO FIXED WINDOW SCALE 9" = '-0" KP/4 MULLION SECTION PROFILE FIXED TO OPERABLE WINDOW SCALE 9" = '-0" KP/4 MULLION SECTION PROFILE OPERABLE TO OPERABLE WINDOW 9" = '-0" KP MULLIONS SECTION DETAILS KP, KP5, KP/4 08 4 OF 9
KP4/4 MULLION SECTION PROFILE FIXED TO FIXED WINDOW SCALE 9" = '-0" KP4/4 MULLION SECTION PROFILE FIXED TO OPERABLE WINDOW SCALE 9" = '-0" KP4/4 MULLION SECTION PROFILE OPERABLE TO OPERABLE WINDOW SCALE 9" = '-0" KP4/4 MULLION SECTION PROFILE W/ EXPANSION JOINT FIXED TO FIXED WINDOW KP4/4 MULLION SECTION PROFILE W/ EXPANSION JOINT KP4/4 MULLION SECTION PROFILE W/ EXPANSION JOINT SCALE 9" = '-0" FIXED TO OPERABLE WINDOW SCALE 9" = '-0" OPERABLE TO OPERABLE WINDOW SCALE 9" = '-0" STEEL REINFORCEMENT NA/7 SCALE '-0" = '-0" @ KP/4 MULLION KP MULLIONS SECTION DETAILS KP4/4, KP4/4 EXPANSION JOINT 08 5 OF 9
KP840 MULLION SECTION PROFILE FIXED TO FIXED WINDOW SCALE 9" = '-0" KP840 MULLION SECTION PROFILE FIXED TO OPERABLE WINDOW SCALE 9" = '-0" KP840 MULLION SECTION PROFILE OPERABLE TO OPERABLE WINDOW SCALE 9" = '-0" SCALE '-6" = '-0" KP840 MULLION SECTION PROFILE FIXED TO FIXED WINDOW SCALE 9" = '-0" KP840 MULLION SECTION PROFILE W/ EXPANSION JOINT FIXED TO OPERABLE WINDOW SCALE 9" = '-0" KP840 MULLION SECTION PROFILE W/ EXPANSION JOINT OPERABLE TO OPERABLE WINDOW SCALE 9" = '-0" STEEL 60X0 (LEFT) & NA0 (RIGHT) @ KP840 MULLION KP MULLIONS SECTION DETAILS KP840 08 6 OF 9
EVLE84 CORNER MULLION SECTION PROFILE FIXED TO FIXED WINDOW SCALE 9" = '-0" EVLE84 CORNER MULLION SECTION PROFILE FIXED TO OPERABLE WINDOW SCALE 9" = '-0" EVLE84 CORNER MULLION SECTION PROFILE OPERABLE TO OPERABLE WINDOW SCALE 9" = '-0" STEEL NA874 @ EVLE84 CORNER MULLION SCALE '-6" = '-0" EVLE84 CORNER MULLION OPPOSITE SECTION PROFILE FIXED TO FIXED WINDOW EVLE84 CORNER MULLION OPPOSITE SECTION PROFILE EVLE84 CORNER MULLION OPPOSITE SECTION PROFILE SCALE 9" = '-0" FIXED TO OPERABLE WINDOW SCALE 9" = '-0" OPERABLE TO OPERABLE WINDOW SCALE 9" = '-0" EVLE84 CORNER MULLION - IMPORTANT! HINGES FOR OPERABLE SASH MUST BE ON OPPOSITE SIDE OF CORNER MULLION 08 7 OF 9
EV70/70 ANGULAR MULLION SECTION PROFILE EV70/70 ANGULARR MULLION SECTION PROFILE FIXED TO FIXED WINDOW SCALE 9" = '-0" FIXED TO OPERABLE WINDOW SCALE 9" = '-0" SCALE EV70/70 ANGULAR MULLION SECTION PROFILE OPERABLE TO OPERABLE WINDOW 9" = '-0" ANGLE X STEEL @ EV70/70 ANGULAR MULLION SCALE '-6" = '-0" EV70/70 ANGULAR MULLION - IMPORTANT! HINGES FOR OPERABLE SASH MUST BE ON OPPOSITE SIDE OF CORNER MULLION 08 8 OF 9
WINDOW OPERATION TYPE WHITE WINDOWS MAX. MEASUREMENT (W x H) COLORED WINDOWS MAX. MEASUREMENT (W x H) A B A B FIXED A= 8'- 9/6" x 9'-0 7/64" B= 9'-0 7/64" x 8'- 9/6" A= 6'- /4" x 8'-6 /64" B= 8'-6 /64" x 6'- /4" A A B B TURN ONLY A= '-7 /" x 7'- 5/8" B= 4'-7 /8" x 4'-7 /8" A= '- 7/6" x 6'-0 /6" B= 4'-" x 4'-5" A A B B CASEMENT WITH TILT OPTION A= '-7 /" x 7'- 5/8" B= 4'-7 /8" x 4'-7 /8" A= '- 7/6" x 6'-0 /6" B= 4'-" x 4'-5" A B A B TILT ONLY A= 4'-8 /4" x 4'-6 5/8" B= 5'-6 7/6" x '-0 5/8" A= 4'-8 5/6" x '-0 /4" B= 5'-6 7/6" x '- 5/8" A B A B FIXED WITH INTEGRAL MULLION A= 0'- 5/8" x 7'-0 /64" B= '- /64" x 6'- /6" A= 7'- 9/6" x 7'-6 5/64" B= 9'-0 7/64" x 5'-5 /6" MAXIMUM WINDOW FRAME SIZE LIMITATIONS - MAX. SIZES ARE FOR REFERENCE ONLY. - THERE MIGHT BE OTHER LIMITING FACTORS. - PLEASE ALWAYS CHECK WITH YOUR PROJECT MANAGER. 08 9 OF 9
DET. TYP. DOUBLE PANE GLAZING OPTIONS W/ 90% ARGON FILLED SPACE PANE A: 4MM,6MM,8MM,0MM ARGON SPACE B: 0MM,MM,4MM,6MM,8MM,0MM,MM PANE C: 4MM,6MM,8MM,0MM LAMINATE FILMS:,,4,6,8 FILMS SCALE '-0" = '-0" DET. TYP. TRIPLE PANE GLAZING OPTIONS W/ 90% ARGON FILLED SPACE PANE A: 4MM,6MM,8MM,0MM ARGON SPACE B/D: 0MM,MM,4MM,6MM MIDDLE PANE C: 4MM,6MM,8MM,0MM PANE E: 4MM,6MM,8MM,0MM LAMINATE FILMS:,,4,6,8 FILMS SCALE '-0" = '-0" MONOLITHIC GLASS INSULATED GLASS UNIT (IG) LAMINATED GLASS INSULATED GLASS UNIT (IG) IG UNIT WITH LAMINATED OUTBOARD IG UNIT WITH LAMINATED INBOARD IG UNIT WITH LAMINATED OUTBOARD IG UNIT WITH LAMINATED OUTBOARD AND INBOARD IG UNIT WITH LAMINATED INBOARD IG UNIT WITH LAMINATED OUTBOARD AND INBOARD SCALE '-0" = '-0" SCALE '-0" = '-0" GLASS GLASS ARGON SPACE ARGON SPACE SPACER SPACER PRIMARY SEALANT PRIMARY SEALANT DESICCANT DESICCANT SECONDARY SEALANT SECONDARY SEALANT TYP. DOUBLE PANE GLAZING SYSTEM TYP. TRIPLE PANE GLAZING SYSTEM SCALE '-0" = '-0" SCALE '-0" = '-0" GLAZING SYSTEM 08 0 OF 9
DEV84 DEV84 GLAZING BEAD STANDARD IG DIMENSION (mm) GASKETS FOR STANDARD IG SIZE EXTERNAL/ INTERNAL 5 6 " [4] DG DEV84 DG G78/D P455 8 " [9] G78/D P455 7 6 " [6] 4 G78/D-P455 DEV84 / DG 5 6 " [50] DG DG G744/ND P454 8 " [9] G744/ND P454 " [5] 50 DEV84 / DG G744/D-454 4 " [] DG GA7/D P7085 GA7/D-7085 GLAZING BEADS AND GASKETS 08 OF 9
DEV84 " [75.60] 8 " [9.95] 4 " [6.] 5 6 " [.7] 4 " [57.8] 5 6 " [8.0] 6 " [9.8] 5 6 " [8.67] FXED SCREEN @ JAMB WINDOW PROFILE SCALE '-0" = ' - 0" 5 8 " [6.48] 4 " [8.8] 7 6 " [.00] FIXED SCREEN FRAME PROFILE SCALE 8" = ' - 0" " [76.60] 8 5 " [7.99] 6 8 " [9.95] 4 " [6.] 5 6 " [.7] 8 " [4.5] FXED SCREEN @ 8MM INTEGRAL MULLION PROFILE SCALE '-0" = ' - 0" G744/ND P454 ZLE84 - P700 CLIP TO FIXED SCREEN SCREW SCALE 8" = ' - 0" DG 8 " [9.95] " [76.60] Ix =.7 NAO84 - P7040 8 " [0.0] " [.] NAC84 - P704 4 " [.00] 4 " [6.] 5 6 " [.7] 7 8 " [48.00] FIXED SCREEN INSTALLED IN OPERABLE WINDOW SCALE 5" = ' - 0" SCREEN CLIP PROFILE - TOP & SIDE VIEW SCALE 8" = ' - 0" FXED SCREEN @ 0MM INTEGRAL MULLION PROFILE SCALE '-0" = ' - 0" FIXED SCREEN 08 OF 9
DEV84 DEV84 5 6 " [] 4 " [] " [5] 8 " [9] 9 6 " [4] 4 " [9] RELIABLE LOUVER GLAZING FRAME BOLT TO CONNECT PTAC SLEEVE TO LOUVER 4 x 76 FRAME (POS. #) SCALE '-6" = '-0" SCALE '-6" = '-0" HANDLE HEIGHT B A B REF. DIM C L REF. DIM WINDOW DIMENSION ENDS OF GLAZING FRAME '-8 5 6 " [5.4] D.L.O. '-7 7 8 " [505.7] REF. DIM C L REF. DIM WINDOW DIMENSION A LOUVER SIZE '-7 6 7 " [49.] 6 7 " [6.8] '-4" [406.46] 4 " [] 5 6 " [4] DG DEV84 MIN. 8 " [9] GA7/D P7085 APPLY CONTINUOUS BEAD OF SEALANT BEFORE ATTACHING WALL SLEEVE MAIN BLANK-OFF PANEL BOLT ATTACHING LOUVER SLEEVE MIN. 6 " [46] MIN. 8 " [] 8 " [0] 6 5 " [] 4 " [] 4 " [70] " [5] " [] DG DEV84 GA7/D P7085.040 ALUM. SHEET INSULATION BLANK OFF APPLY A CONTINUOUS BEAD OF SEALANT BEFORE ATTACHING WALL SLEEVE MAIN BLANK-OFF PANEL BOLT ATTACHING LOUVER SLEEVE 6 7 " [6.58] WITH PTAC WALL SLEEVE - NO INSULATION SCALE '-0" = '-0" WITH PTAC WALL SLEEVE - W/ INSULATION SCALE '-0" = '-0" 4 " [7] 4 " [7] REF. LOUVER DIM. '-6" [066.80] REF. LOUVER DIM. " [5] MIN. 6 5 " [] MIN. 5 6 " [50] " [5] MIN. 6 5 " [] MIN. 5 6 " [50] DG 8 " [0] GA7/D P7085 DG 8 " [0] GA7/D P7085 NAO84 - P7040 NAO84 - P7040 WINDOW LOUVER SAMPLE ELEVATION SCALE " = '-0" WITH PTAC WALL SLEEVE - RAIN LIP DOWN WITH PTAC WALL SLEEVE - RAIN LIP UP SCALE '-0" = '-0" SCALE '-0" = '-0" WINDOW LOUVER 08 OF 9
FIXED WINDOW WITH UNDERSILL PROFILE SA0 OPERABLE WINDOW WITH UNDERSILL PROFILE SA0 7 8 " [48] DEV84 DG DEV84 DG DEV84 DG G744/ND P454 G744/ND P454 G744/ND P454 6 " [0] 7 6 " [6] 4 " [70] NAO84 - P7040 NAO84 - P7040 NAO84 - P7040 SA0 5 6 " [50] 9 6 " [65] 7 8 " [48] 6 " [0] 6 " [6] SA0 7 8 " [48] SA0 MIN #0 x 5 6 6 " (5mm x 50mm) SELF-DRILLING FLAT HEAD PHILLIPS SHEET METAL SCREW (B.W.I.) SA0 K8 UNDERSILL PROFILE SA0 SCALE 8" = ' - 0" UNDERSILL ON A FIXED WINDOW SECTION PROFILE @ SILL SCALE '-0" = ' - 0" UNDERSILL FACTORY PRE-INSTALLED SCALE '-0" = ' - 0" UNDERSILL FIELD INSTALLED WITH MOUNTING BRACKET SCALE '-0" = ' - 0" UNDERSILL PROFILE SA0 08 4 OF 9
FLANGE UST8 PROFILE FLANGE UST8-0 PROFILE SCALE: '-0" = '-0" FLANGE UST8 & UST8-0 PROFILES - LAMINATION OPTIONS AVAILABLE UPON REQUEST. - NAILING FLANGES CAN NOT BE USED ON WINDOWS WITH UNDERSILL PROFILES. 08 5 OF 9
FRACTIONAL TRADITIONAL ELEGANT ENGLAND FROM GLASS TO DUPLEX SPACER MIN GAP OF mm AND MAX GAP OF mm SIMULATED DIVIDED LITES WITH SPACERS STUCK-ON GRIDS GRIDS IN-PANE SCALE: 0" = '-0" WINDOW GRID DETAILS G0 G G G G4 G5 G6 COLONIAL PRAIRIE BASIC CONFIGURATIONS SCALE: '-0" = '-0" GRIDS 08 6 OF 9
HANDLE FKS006 (NOT LOCKABLE) FRONT, SIDE & ISOMETRIC VIEWS TILT & TURN HANDLE FRAME POSITION TILT ONLY HANDLE FRAME POSITION TILT BEFORE TURN HANDLE FRAME POSITION TILT POSITION TURN POSITION TURN POSITION TILT POSITION LOCKED POSITION LOCKED POSITION HANDLE FKS006A/FKS006ATBT (LOCKABLE) FRONT, SIDE AND ISOMETRIC VIEWS TILT&TURN HANDLE OPERATION POSITIONS TILT ONLY HANDLE OPERATION POSITIONS TILT BEFORE TURN HANDLE OPERATION POSITIONS * HANDLES AND OPERATION - FOR TILT BEFORE TURN WINDOWS, KEY REQUIRED FOR TURN OPEN - AWNING WINDOW HANDLES AVAILABLE LEFT AND RIGHT 08 7 OF 9
SDR6 DETACHABLE RESTRICTOR VERTICAL SECTION SDR4 RESTRICTOR SDR6 RESTRICTOR SCALE '-0" = '-0" SCALE '-0" = '-0" #0 X " NON-TAMPER SCREW OPERABLE WINDOW SECTION PROFILE @ HEAD SCALE '-0" = '-0" OPERABLE WINDOW SECTION PROFILE @ JAMB SCALE '-0" = '-0" OPERABLE WINDOW SECTION PROFILE @ SILL SCALE '-0" = '-0" UNLOCKING KEY SCALE '-0" = '-0" NYC WINDOW FALL PREVENTION SYSTEM 08 8 OF 9
HOPPER WINDOW RESTRICTOR LOCATION @ LARGE UNIT SCALE " = '-0" CASEMENT WINDOW RESTRICTOR LOCATION @ LARGE UNIT SCALE " = '-0" DUAL ACTION WINDOW RESTRICTOR LOCATION @ LARGE UNIT SCALE " = '-0" NYC WINDOW FALL PREVENTION SYSTEM RESTRICTOR LOCATION 08 9 OF 9
FRAME SIZE UP TO 6" FINISH COLOR ROUGH OPENING GAP 4 " [70] 8 " [0] LIGHT COLOR DARK COLOR NAO84 - P7040 /8" W.D. FROM 6" UP TO 7" R.O. 4 " [70] " [] LIGHT COLOR DARK COLOR NAO84 - P7040 /" W.D. FROM 7" UP TO 0" R.O. 4 " [70] 4 " [9] LIGHT COLOR DARK COLOR NAO84 - P7040 /4" W.D. R.O. FROM 0" UP TO 50" 4 " [70] " [5] LIGHT COLOR DARK COLOR NAO84 - P7040 " W.D. R.O. OVER 50" LIGHT COLOR 4 " [70] " [5] DARK COLOR NAO84 - P7040 " + EXPANSION JOINT W.D. R.O. 0" 6" 7" 0" 50" DETERMINING ROUGH OPENING GAPS - ROUGH OPENING GAPS DIMENSIONS ARE FOR REFERENCE AND GENERIC USE ONLY. - LENGTH CONDITIONS APPLY BOTH HORIZONTALLY AND VERTICALLY. - ALWAYS FOLLOW PROJECT SPECIFIC DRAWINGS FOR ACCURATE ROUGH OPENING SIZES. 08 0 OF 9
C L " [5.00] 5 4 " [46.00] 6 " [4.0] 6 " [.50] K8 5 6 " [44.9] 6" [5] '-8" [508] 6" [5] '-8" [508] 6" FROM CORNERS 0" ON CENTER " [76] " [76] " [76] 6" FROM CORNERS C L 0" ON CENTER BRACKETS ON EACH SIDE OF INTEGRAL MULLION @ "O.C. SCALE: '-0" = '-0" C L C L 6 " [0] NAO84 - P7040 " [76] " [76] " [76] SCALE: '-0" = '-0" C L C L SUGGESTED ANCHORS 6" [5] " [76] " [76] " [76] C L 6" FROM CORNERS 0" ON CENTER BRACKETS ON EACH SIDE OF A KP MULLION @ "O.C. 6" [5] " [76] " [76] " [76] 6" FROM CORNERS 0" ON CENTER BRACKETS ON EACH SIDE OF INTEGRAL MULLION @ " O.C. BRACKETS ON EACH SIDE OF A KP MULLION @ "O.C. C L INTO STEEL STUD (8 GAUGE MIN.) () ANCHORS PER CLIP SCREW - /4-4 SMS (GRADE 5 MIN.) MIN. FULL THREADS PENETRATION INTO STUD MIN. EDGE DISTANCE " MIN. SPACING BETWEEN ANCHORS " INTO METAL (606-T5, MIN. /6" THICK) () ANCHORS PER CLIP SCREW - /4-0 SMS (GRADE 5 MIN.) MIN. FULL THREAD PENETRATION MIN. EDGE DISTANCE /4" MIN. SPACING BETWEEN ANCHORS /4" MAX. SHIM SPACING " INTO GROUT FILLED CMU BLOCK (F=,000 PSI MIN.) () /4" TAPCONS ANCHOR PER CLIP MIN. DEPTH OF EMBEDMENT INTO CONCRETE " MIN. EDGE DISTANCE " MIN. SPACING BETWEEN ANCHORS " INTO CONCRETE (F=,000 PSI MIN.) () /4" TAPCONS ANCHOR PER CLIP MIN. DEPTH OF EMBEDMENT INTO CONCRETE -/4" MIN. EDGE DISTANCE -/" MIN. SPACING BETWEEN ANCHORS " INTO WOOD BUCK (# S-P-F OR BETTER, G=0.4) () /4" ULTRACON BY ELCO (OR EQUAL) MIN. DEPTH OF EMBEDMENT INTO WOOD -/" MIN. EDGE DISTANCE " MAX. SHIM SPACING " MIN. SPACING BETWEEN ANCHORS " SUGGESTED ANCHORS FOR A MAXIMUM DESIGN PRESSURE OF 50 P.S.F. ANY ENGINEERING CALCULATIONS TO TAKE PRECEDENCE. MOUNTING BRACKET - MODEL K8 08 OF 9
SHIMS POSITION AND MOUNTAIN BRACKET DETAIL SCALE '-0" = '-0" SHIMS POSITION IN A TILT & TURN WINDOW SCALE " = '-0" SHIMS POSITION AND MOUNTAIN BRACKET DETAIL SCALE '-0" = '-0" SHIM POSITIONING! OVER-SHIMMING CAN CAUSE BOWING AND PREVENT PROPER WINDOW OPERATION 08 OF 9
SHIMS POSITION FOR A FIXED WINDOW SHIMS POSITION FOR A TILT ONLY WINDOW SHIMS POSITION FOR A TILT&TURN WINDOW SHIMS POSITION FOR A DOUBLE TILT&TURN WINDOW SHIMS POSITION FOR A FIXED TO OPERABLE TILT&TURN WINDOW SCALE: " = '-0" SHIM POSITIONING! OVER-SHIMMING CAN CAUSE BOWING AND PREVENT PROPER WINDOW OPERATION 08 OF 9
SUPPORTING BLOCK DISTANCE BLOCK DISTANCE BLOCK *Additionally from a profile length FIXED WINDOW TILT ONLY WINDOW FIXED TO TILT&TURN WINDOW TURN ONLY WINDOW TILT&TURN WINDOW SCALE: " = '-0" GLAZING BLOCKS PLACEMENT INSTRUCTIONS 08 4 OF 9
DG R.O. " [] F.S. INTO WOOD BUCK (# S-P-F OR BETTER, G=0.4) () /4" ULTRACON BY ELCO (OR EQUAL) MIN. DEPTH OF EMBEDMENT INTO WOOD -/" MIN. EDGE DISTANCE " MAX. SHIM SPACING " MIN. SPACING BETWEEN ANCHORS " 4 " [70] D.L.O. DEV84 8 " (4mm x 0mm) SELF-DRILLING FLAT HEAD PHILLIPS SHEET METAL SCREW (B.W.I.) G744/ND P454 " [] G744/ND P454 4 " [70] 8 " (4mm x 0mm) SELF-DRILLING FLAT HEAD PHILLIPS SHEET METAL SCREW (B.W.I.) DG DEV84 F.S. R.O. D.L.O. INTO WOOD BUCK (# S-P-F OR BETTER, G=0.4) () /4" ULTRACON BY ELCO (OR EQUAL) MIN. DEPTH OF EMBEDMENT INTO WOOD -/" MIN. EDGE DISTANCE " MAX. SHIM SPACING " MIN. SPACING BETWEEN ANCHORS " DET. B. FIXED WINDOW INSTALLATED IN FIBER CEMENT WALL @ HEAD FLANGED WINDOW SCALE 6" = ' - 0" DET. B. FIXED WINDOW INSTALLATED IN FIBER CEMENT WALL @ JAMB FLANGED WINDOW SCALE 6" = ' - 0" D.L.O. B F.S. R.O. INTO WOOD BUCK (# S-P-F OR BETTER, G=0.4) /4" ULTRACON BY ELCO (OR EQUAL) DEPTH OF EMBEDMENT INTO WOOD -/" NAO84 - P7040 4 " [70] SELF-DRILLING FLAT HEAD PHILLIPS " [] B INTO WOOD BUCK (# S-P-F OR BETTER, G=0.4) () /4" ULTRACON BY ELCO (OR EQUAL) MIN. DEPTH OF EMBEDMENT INTO WOOD -/" MIN. EDGE DISTANCE " MAX. SHIM SPACING " MIN. SPACING BETWEEN ANCHORS " INTO WOOD BUCK (# S-P-F OR BETTER, G=0.4) /4" ULTRACON BY ELCO (OR EQUAL) DEPTH OF EMBEDMENT INTO WOOD -/" " (4mm x 0mm) SELF-DRILLING FLAT HEAD PHILLIPS SHEET METAL SCREW (B.W.I.) B DET. B. FIXED WINDOW INSTALLATED IN FIBER CEMENT WALL @ SILL FLANGED WINDOW SCALE 6" = ' - 0" INTO WOOD BUCK (# S-P-F OR BETTER, G=0.4) /4" ULTRACON BY ELCO (OR EQUAL) DEPTH OF EMBEDMENT INTO WOOD -/" SPACING BETWEEN ANCHORS " B - WALL DIAGRAM FLANGED WINDOW SCALE " = ' - 0" TYPICAL INSTALLATION INSTTRUCTIONS FLANGED WINDOW 08 5 OF 9
DEV84 INTO WOOD BUCK (# S-P-F OR BETTER, G=0.4) () /4" ULTRACON BY ELCO (OR EQUAL) MIN. DEPTH OF EMBEDMENT INTO WOOD -/" MIN. EDGE DISTANCE " MAX. SHIM SPACING " MIN. SPACING BETWEEN ANCHORS " " [] R.O. F.S. 4 " [70] D.L.O. DEV84 8 " (4mm x 0mm) SELF-DRILLING FLAT HEAD PHILLIPS SHEET METAL SCREW (B.W.I.) DG " [] G744/ND P454 4 " [70] F.S. R.O. D.L.O. D.L.O. F.S. R.O. NAO84 - P7040 4 " [70] 8" (4mm x 0mm) SELF-DRILLING FLAT HEAD PHILLIPS SHEET METAL SCREW (B.W.I.) K8 G744/ND P454 DG 8" (4mm x 0mm) SELF-DRILLING FLAT HEAD PHILLIPS SHEET METAL SCREW (B.W.I.) K8 INTO WOOD BUCK (# S-P-F OR BETTER, G=0.4) () /4" ULTRACON BY ELCO (OR EQUAL) MIN. DEPTH OF EMBEDMENT INTO WOOD -/" MIN. EDGE DISTANCE " MAX. SHIM SPACING " MIN. SPACING BETWEEN ANCHORS " DET. B. FIXED WINDOW INSTALLATED IN FIBER CEMENT WALL @ HEAD NON-FLANGED WINDOW SCALE 6" = ' - 0" DET. B. FIXED WINDOW INSTALLATED IN FIBER CEMENT WALL @ JAMB NON-FLANGED WINDOW SCALE 6" = ' - 0" B " [] B INTO WOOD BUCK (# S-P-F OR BETTER, G=0.4) () /4" ULTRACON BY ELCO (OR EQUAL) MIN. DEPTH OF EMBEDMENT INTO WOOD -/" MIN. EDGE DISTANCE " MAX. SHIM SPACING " MIN. SPACING BETWEEN ANCHORS " B DET. B. FIXED WINDOW INSTALLATED IN FIBER CEMENT WALL @ SILL NON-FLANGED WINDOW SCALE 6" = ' - 0" B - WALL DIAGRAM NON- FLANGED WINDOW SCALE " = ' - 0" TYPICAL INSTALLATION INSTTRUCTIONS NON-FLANGED WINDOW 08 6 OF 9
SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) KP - P440 KP5 - P46 Ix = 4.7 STEEL REINFORCEMENT STEEL 80 X 0 KP5 - P46 KP KP5 KP.4 - P466 Ix = 9. NA/7 - P577 SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) KP4.4 - P466 Ix=65.9 BACKER ROD AS NEEDED (P.B.O.) BACKER ROD AS NEEDED (P.B.O.) BACKER ROD AS NEEDED (P.B.O.) NA49-84 - P7050 SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) KP4.4 - P466 Ix=65.9 NA49-84 - P7050 SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) STEEL REINFORCEMENT STEEL REINFORCEMENT STEEL REINFORCEMENT KP P5 KP/4 KP4/4 KP4/4 WITH EXPANSION JOINT SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) Ix = 8 Ix = 8.6 STEEL REINFORCEMENT STEEL REINFORCEMENT STEEL 60X0 NA0 - P459 KP840 - P7080 KP840 - P7080 KP840 - FLAT STEEL REINFORCEMENT KP840 - TUBE STEEL REINFORCEMENT SCALE ' - 0" = ' - 0" SEALING INSTRUCTIONS - INTUS WINDOWS DOES NOT CONTROL THE SELECTION OF SEALANTS OR CAULKING, AND ASSUMES NO RESPONSIBILITY THEREOF. IT IS THE RESPONSIBILITY OF THE ARCHITECT, GENERAL CONTRACTOR, OR INSTALLER TO MAKE SELECTION DECISIONS. - INSTALLATION INSTRUCTIONS PROVIDED BY INTUS WINDOWS ARE FOR EDUCATIONAL PURPOSE ONLY. ALL RECOMMENDATIONS MUST BE APPROVED BY ARCHITECT OR ANY OTHER AUTHORIZED PARTY PRIOR TO INSTALLATION. 08 7 OF 9
WK50 Ix=7.46 NA50 - P4890 APPLY SEALANT (P.B.O.) IN GROOVE BEFORE SCREWING SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) Ix = 4.7 NR5 - P56 STEEL REINFORCEMENT STEEL REINFORCEMENT STEEL REINFORCEMENT STEEL 80 X 0 SEAL FULL HEIGHT OF FACE IN CONTACT WITH ALUMINUM DOOR SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) ALUMINUM DOOR FRAME FOR REFERENCE ONLY (P.B.O.) EVLE84 EVLE84 OPPOSITE KP5+WK50 (FOR CONNECTION WITH ALUMINUM DOORS ONLY) SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O) SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) STEEL REINFORCEMENT STEEL REINFORCEMENT SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) EV70/EV70 ANGULAR EV70/EV70 ANGULAR SEALANT FROM TOP TO BOTTOM OF CONNECTING EDGE (P.B.O.) SCALE ' - 0" = ' - 0" SEALING INSTRUCTIONS - INTUS WINDOWS DOES NOT CONTROL THE SELECTION OF SEALANTS OR CAULKING, AND ASSUMES NO RESPONSIBILITY THEREOF. IT IS THE RESPONSIBILITY OF THE ARCHITECT, GENERAL CONTRACTOR, OR INSTALLER TO MAKE SELECTION DECISIONS. - INSTALLATION INSTRUCTIONS PROVIDED BY INTUS WINDOWS ARE FOR EDUCATIONAL PURPOSE ONLY. ALL RECOMMENDATIONS MUST BE APPROVED BY ARCHITECT OR ANY OTHER AUTHORIZED PARTY PRIOR TO INSTALLATION. 08 8 OF 9
KP - P440 KP5 - P46 Ix = 4.7 NAO84 - P7040 5 6 " [75] 75 NAO84 - P7040 8 " [85] 85 Ix = 8 8 " [85] 85 STEEL 80 X 0 KP5 - P46 STEEL 60X0 KP840 - P7080 KP MULLION KP5 MULLION KP840 MULLION KP.4 - P466 KP4.4 - P466 Ix=65.9 KP4.4 - P466 Ix=65.9 Ix = 9. NA/7 - P577 NA49-84 - P7050 NA49-84 - P7050 5 6 " [75] 75 5 6 " [75] 75 " [5] 5 6 " [75] 75 9 6 " [5] KP P5 KP/4 MULLION KP4/4 MULLION KP4/4 W/ EXPANSION JOINT SCREWS 6" FROM CORNERS & 0" O.C. Ix=7.46 WK50 6" (5mm x 75mm) SELF-DRILLING FLAT HEAD PHILLIPS SHEET METAL SCREW (B.W.I.) 5 6 " [75] NAO84 - P7040 EV70 - P457 8 " [85] NAO84 - P7040 4 " [95] NA50 - P4890 NR5 - P56 Ix = 4.7 5 6 " [75] EV70 - P457 8 " [85] NAO84 - P7040 8 " [85] 6" (5mm x 85mm) SELF-DRILLING FLAT HEAD PHILLIPS SHEET METAL SCREW (B.W.I.) 75 85 ALUMINUM DOOR FRAME FOR REFERENCE ONLY (P.B.O.) STEEL 80 X 0 4"(6mm x 95mm) SELF-DRILLING FLAT HEAD PHILLIPS SHEET METAL SCREW (B.W.I.) EVLE84 MULLION, EVLE84 MULLION OPPOSITE EV70+EV70 MULLION KP5 MULLION + ADD ON WK50 SCALE 0" = ' - 0" MULLION INSTRUCTIONS - GENERAL GUIDE FOR SCREWS USE UP TO 50psf 08 9 OF 9