Piranha Single Operator Ironworkers provide: Industry leading cycle times punch holes in less time than other ironworkers Urethane Strippers Results in less part distortion, faster cycle times, no need for stripper height adjustment Integrated notching station Low shear removes fillet for precise, burr-free cuts and clean notches. Quick-Change Tooling Split dovetail slide mountings make tool changes from punching to bending in less than one minute on all models except P-50. Automatic Urethane Hold-Downs This unique Piranha feature, coupled with a low rake angle, keeps parts from deforming or shifting during the shearing process. The hold-downs work automatically, eliminating the need for timeconsuming adjustments between cuts (Except on P-50). Ergonomics Convenient work height and visibility for all stations. The single work height also provides added benefits when using roller feed tables. Piranha Ironworkers All Share These Standard Features Complete punching attachment with stripper 5 Punch and Die Sets appropriate to machine tonnage (No punch and die sets included on P-50) Set of Round Bar Knives 2-way (Except on P-50) Two Chip Buckets (Except on P-50) Extra Oil Filter Element (Except on P-50) Integral lifting lug system for instant portability (Except on P-50)
P-50 SINGLE OPERATOR IRONWORKER Standard Features Punch Station Angle Shear Flat Shear Station Coper-Notcher Station Urethane Stripper Assembly Hold Down Assembly Electric Foot Switch Electric Limit Switches P-50 Capacities & Specifications Throat Depth 5 Coper-Notcher (Tons) (Max. Material) 40 2-1/4 x 3 x 1/4 Open Height 11-1/2 Optional Bending Attach. 6 12 Closed Height w/o Die Block 7-3/4 Punch End Strokes Per Minute 30 @ 1/2 Stroke Length 3-3/4 Work Station Height Approx. Platen Table Size (D-W) 8 x 16 Hydraulics Pump GPM System R/V PSI 42 3.6 2800 Punch Hole Size (Max. Material) Max. Hole Size (Material) 50 Tons 13/16 (3/4 ) 3 (3/16 ) Fluid Capacity (gal.) 12 Plate Shear 13 Long 3/4 x 6 1/2 x 10 3/8 x 12 1/4 x 13 Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available 3 HP 3 Ph. Angle Shear 3 x 3 x 3/8 3-1/2 x 3-1/2 x 5/16 Dimensions (Net) W-L-H Approx. 24 x 55 x 58 Bar Shear Round (min. to max.) Square (min. to max.) Optional 1/4 to 1-3/8 1/2 to 1 Weight (Net) Lbs. Approx. 1700
P-65 SINGLE OPERATOR IRONWORKER The Piranha Model P-65 is Piranha s most popular model of ironworker. The P-65 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher. The P-65 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds The P-65 has full electrical control of its stroke with a footswitch and limit switch stroke controls this,coupled with urethane strippers and more horsepower per ton, gives the P-65 the fastest punching stroke in the industry. The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-65 s capabilities. Piranha s incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part from any angle. So, when comparing ironworkers, look at the complete package. Standard Features Complete Punching Attachment with split dove tail mounting 5 Punch and Die sets Automatic Urethane Hold Down on the Punch Stripper and on Angle Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 1-1/2 ) Set of 12.125 Plate Shear Knives [4 way] Set of Angle Knives [8 way top] [4 way bottom] Set of Coper Knives [2 way top] [4 way bottom] Chip Buckets (2 each) Extra Oil Filter Coupling Wrench & 3/8 Allen Wrench Integral Lifting Lug for instant portability
P-65 Capacities & Specifications Throat Depth 8 Coper-Notcher (Tons) (Max.) 56 2-3/4 x 4 x 1/4 Open Height 13-1/2 Bending Attachment (Optional) 8, 12, 14, 24 Closed Height w/o Die Block 9-1/4 Punch End Strokes Per Minute Optional Speed-Up Kit 30 @ 3/4 45 @ 3/4 Stroke Length 4-1/4 Work Station Height Approx. 42 Platen Table Size (D-W) 10 x 17 Hydraulics Pump GPM System R/V PSI 7.5 3000 Punch Hole Size (Max. Material) Max. Hole Size (Material) 65 Tons 1-1/16 (3/4 ) 5 (1/8 ) Fluid Capacity (gal.) 20 Plate Shear *with fixed hold down 15-1/2 Long *1 x 4 3/4 x 10 5/8 x 15 Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available 7.5 HP 3 Ph. Angle Shear ** with special blade 5 x 5 x 3/8 **4 x 4 x 1/2 Dimensions (Net) W-L-H Approx. 24 x 66 x 60 Bar Shear Round (min. to max.) Square (min. to max.) 1/4 to 1-1/2 1/2 to 1 Weight (Net) Lbs. Approx. 2600
P-90 SINGLE OPERATOR IRONWORKER The Piranha Model P-90 picks up where the P-65 leaves off for applications requiring more tonnage. The P-90 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher. The P-90 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds The P-90 has full electrical control of its stroke with a footswitch and limit switch stroke controls. The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-90 s capabilities. Piranha s incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part from any angle. So, when comparing ironworkers, look at the complete package. Standard Features Complete Punching Attachment with split dove tail mounting 5 Punch and Die sets Automatic Urethane Hold Down on the Punch Stripper and on Angle Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 2) Set of 14.50 Plate Shear Knives [4 way] Extra Blank Knife to extend shear to 18 Set of Angle Knives [8 way top] [4 way bottom] Set of Coper Knives [2 way top] [4 way bottom] Chip Buckets (2 each) Extra Oil Filter Coupling Wrench & 3/8 Allen Wrench Integral Lifting Lug for instant portability
P-90 Capacities & Specifications Throat Depth 10 Coper-Notcher (Tons) (Max.) 75 3-1/2 x 5 x 3/8 Open Height 15 Bending Attachment (Optional) 12, 24 Closed Height w/o Die Block 10-1/8 Punch End Strokes Per Minute Optional Speed-Up Kit 32 @ 3/4 45 @ 3/4 Stroke Length 4-7/8 Work Station Height Approx. 42 Platen Table Size (D-W) 12 x 21 Hydraulics Pump GPM System R/V PSI 10.5 2900 Punch Hole Size (Max. Material) Max. Hole Size (Material) 90 Tons 1-1/8 (1 ) 5 (3/16 ) Fluid Capacity (gal.) 25 Plate Shear 18 Long 1 x 8 3/4 x 12 1/2 x 18 Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available 10 HP 3 Ph. Angle Shear 5 x 5 1/2 Dimensions (Net) W-L-H Approx. 31 x 79 x 64 Bar Shear Round (min. to max.) Square (min. to max.) 1/2 to 2 1/2 to 1-3/8 Weight (Net) Lbs. Approx. 4250
P-110 SINGLE OPERATOR IRONWORKER The Piranha Model P-110 Ironworker is a strong workhorse capable of performing in heavy applications. The P-110 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher. The P-110 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds The P-110 has full electrical control of its stroke with a footswitch and limit switch stroke controls. The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-110 s capabilities. Piranha s incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part from any angle. So, when comparing ironworkers, look at the complete package. Standard Features Complete Punching Attachment with split dove tail mounting 5 Punch and Die sets Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 2) Set of 16.625 Plate Shear Knives [4 way] Set of 20.5 Plate Shear Knives [4 way] (instead of Round Bar Knives and 16.625 Plate Shear Knives) Extra Blank Knife to extend shear to 20.5 Set of Angle Knives [8 way top] [4 way bottom] Set of Coper Knives [2 way top] [4 way bottom] Chip Buckets (2 each) Extra Oil Filter Coupling Wrench & 3/8 Allen Wrench Integral Lifting Lug for instant portability
P-110 Capacities & Specifications Compare capacities & specifications of all ironworkers. Throat Depth 12 Coper-Notcher (Tons) (Max.) 95 4 x 6 x 3/8 Open Height 15-1/2 Bending Attachment (Optional) 12, 24 Closed Height w/o Die Block 10-1/4 Punch End Strokes Per Minute Optional Speed-Up Kit 30 @ 3/4 41 @ 3/4 Stroke Length 5-1/4 Work Station Height Approx. 44 Platen Table Size (D-W) 14-1/2 x 21 Hydraulics Pump GPM System R/V PSI 10.5 3200 Punch Hole Size (Max. Material) Max. Hole Size (Material) 110 Tons 1-7/16 (1 ) 5 (1/4 ) Fluid Capacity (gal.) 25 Plate Shear 20-1/2 Long 1 x 12 3/4 x 18 1/2 x 20 Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available 10 HP 3 Ph. Angle Shear 6 x 6 x 5/8 Dimensions (Net) W-L-H Approx. 35 x 90 x 66-1/2 Bar Shear Round (min. to max.) Square (min. to max.) 1/2 to 2 1/2 to 1-3/8 Weight (Net) Lbs. Approx. 5800
P-140 SINGLE OPERATOR IRONWORKER With 140 tons of punching force, the Piranha Model P- 140 is truly the king of single operator ironworkers. The P-140 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher. The P-140 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds The P-140 has full electrical control of its stroke with a footswitch and limit switch stroke controls for fast punching cycles. The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-140 s capabilities. Piranha s incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part from any angle. So, when comparing ironworkers, look at the complete package. Standard Features Complete Punching Attachment with split dove tail mounting 5 Punch and Die sets Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 2) Set of 16.625 Plate Shear Knives [4 way] Set of 20.5 Plate Shear Knives [4 way] (instead of Round Bar Knives and 16.625 Plate Shear Knives) Extra Blank Knife to extend shear to 20.5 Set of Angle Knives [8 way top] [4 way bottom] Set of Coper Knives [2 way top] [4 way bottom] Chip Buckets (2 each) Extra Oil Filter Coupling Wrench & 3/8 Allen Wrench Integral Lifting Lug for instant portability
P-140 Capacities & Specifications Compare capacities & specifications of all ironworkers. Throat Depth 12 Coper-Notcher (Tons) (Max.) 95 4 x 6 x 3/8 Open Height 15-1/2 Bending Attachment (Optional) 12, 24 Closed Height w/o Die Block 10-1/4 Punch End Strokes Per Minute Optional Speed-Up Kit 30 @ 3/4 35 @ 3/4 Stroke Length 5-1/4 Work Station Height Approx. 44 Platen Table Size (D-W) 14-1/2 x 21 Hydraulics Pump GPM System R/V PSI 15 3500 Punch Hole Size (Max. Material) Max. Hole Size (Material) 140 Tons 1-3/4 (1 ) 5 (5/16 ) Fluid Capacity (gal.) 25 Plate Shear 20-1/2 Long 1 x 14 3/4 x 18 1/2 x 20 Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available 15 HP 3 Ph. Angle Shear 6 x 6 x 5/8 Dimensions (Net) W-L-H Approx. 35 x 90 x 68-1/2 Bar Shear Round (min. to max.) Square (min. to max.) 1/2 to 2 1/2 to 1-3/8 Weight (Net) Lbs. Approx. 6200
PII-88 DUAL OPERATOR IRONWORKER The Piranha Model PII-88 has dual-operator controls for the punch station and shear/coper stations and an Automatic Urethane Hold Down on the Plate and Angle Shear. Both ends of the machine can be operated independently of each other at the same time. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling, in addition to a 24 plate shear capacity. Standard Features Complete Punching Attachment with stripper 5 Punch and Die sets Front and rear 2 position joy stick controls (electric) Front and rear Remote Electric Foot Switches Front limit switch stroke control Set of Round Bar Knives [2 way] (customers choice to 1-1/2 ) Set of 20.625 Plate Shear Knives [4 way] Set of Blank Knives to extend shear to 24 Set of Coper Knives [2 way top] [4 way bottom] Set of Angle Shear Knives [8 way top] [4 way bottom] Chip Buckets (coper end) Extra Oil Filter Coupling Wrench Intergral Lifting Lug for instant portability
Capacities & Specifications Compare capacities & specifications of all ironworkers. Throat Depth 9 Coper-Notcher (Tons) (Max.) 56 2-3/4 x 4 x 1/4 Open Height 14 Bending Attach. (Optional) 24, 36, 48 Closed Height w/o Die Block 7-3/4 Punch End Strokes Per Minute 19 @ 1 Stroke Length 7 Work Station Height Approx. 41 Platen Table Size (D-W) 11 x 38 Hydraulics Pump GPM System R/V PSI 7.5 3500 Punch Hole Size (Max. Material) Max. Hole Size (Material) 88 Tons 1-1/16 (1 ) 5 (3/16 ) Fluid Capacity (gal.) 20 Plate Shear 24 Long 3/4 x 8 5/8 x 12 1/4 x 24 Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available 10 HP 3 Ph. Angle Shear 5 x 5 x 3/8 **4 x 4 x 1/2 Dimensions (Net) W-L-H Approx. 38 x 90 x 72 Bar Shear Round (min. to max.) Square (min. to max.) 1/4 to 1-1/2 1/2 to 1 Weight (Net) Lbs. Approx. 4700
PII-140 DUAL OPERATOR IRONWORKER The Piranha Model PII-140 has dual-operator electric controls (foot pedal and joystick) for the punch stations and shear/coper stations. Also featured are Automatic Urethane Hold Downs on the Angle, Plate and Bar Shears. The large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling. Standard Features Complete Punching Attachment with stripper 5 Punch and Die sets Automatic Urethane Hold Down on the Plate, Angle, and Bar Shear Front and rear 2 position joy stick controls (electric) Front and rear Remote Electric Foot Switches Front limit switch stroke control Set of Round Bar Knives [2 way] (customers choice to 2 ) Set of 14.5 Plate Shear Knives [4 way]: For PII-110 Set of 16.625 Plate Shear Knives [4 way]: For PII-140 Set of 20.5 Plate Shear Knives [4 way] instead of Round Bar Knives and 16.625 Plate Shear Knives: For PII-140 Extra Blank Knife to extend shear to 18 on PII-110 or 20.5 on PII-140 Set of Coper Knives [2 way top] [4 way bottom] Set of Angle Shear Knives [2 way top] [4 way bottom] Chip Buckets (coper end) Extra Oil Filter Coupling Wrench Intergral Lifting Lug for instant portability
PII-140 Capacities & Specifications Compare capacities & specifications of all ironworkers. Throat Depth 20.5 Coper-Notcher (Tons) (Max. Material) 95 4 x 6 x 3/8 Open Height 14 Bending Attach. (Optional) 18, 24, 36, 48 Closed Height w/o Die Block 7-3/4 Punch End Strokes Per Minute 24 @ 1 Stroke Length 7 Work Station Height Approx. 44 Platen Table Size (D-W) 16 x 36 Hydraulics Pump GPM System R/V PSI 15 3500 Punch Hole Size (Max. Material) Max. Hole Size (Material) 140 Tons 1-3/8 (1-1/4 ) 5 (5/16 ) Fluid Capacity (gal.) 40 Plate Shear 20-1/2 Long 1 x 14 3/4 x 18 1/2 x 20 Motor Std. 230/460 3 Ph. 1800 RPM Opt Phase & Voltage Available 20 HP 3 Ph. Angle Shear 6 x 6 x 5/8 Dimensions (Net) W-L-H Approx. 38 x 120 x 85 Bar Shear Round (min. to max.) Square (min. to max.) 1/2 to 2 1/2 to 1-3/8 Weight (Net) Lbs. Approx. 11,930