CI/SfB (90.7) x 2010 V.1 HIGH-INTEGRITY SHELTERS, COMPOUNDS, WALKWAYS, CANOPIES AND STREET FURNITURE Apex Shelter Systems Ltd Apex House Units 3-4 26a Hart Street Southport Merseyside PR8 6BT T: 01704 546522 F: 01704 517437 E: sales@apexshelters.co.uk www.apexshelters.co.uk www.apexshelters.co.uk DESIGN / MANUFACTURE / INSTALL

Contents Introduction 4 Colour Charts 6 Roofing Materials 7 CYCLE AND MOTORCYCLE SHELTERS 8-23 Alpha Cycle Shelter 8 Alpha Motorcycle Shelter 9 Economy Alpha Cycle Shelter 10 Junior Alpha Cycle Shelter 11 Beta Cycle Shelter 12 Beta Motorcycle Shelter 13 Theta Cycle Shelter 15 Theta Motorcycle Shelter 15 Eta Infant Shelter 16 Delta Cycle Shelter 18 Delta Motorcycle Shelter 19 Gamma Cycle Shelter 20 Gamma Motorcycle Shelter 21 Castor Cycle Shelter 22 CYCLE AND MOTORCYCLE COMPOUNDS 24-28 Alpha Cycle and Motorcycle Compound 24 Locking Mechanisms 25 Theta Cycle and Motorcycle Compound 26 Wooden Shelters BREEAM Compliant 27 Opposing Alpha Cycle and Motorcycle Compounds 28 Opposing Theta Cycle and Motorcycle Compounds 30 Castor Cycle Compound 31 Alpha Gamma Combination Compound 32 Theta Delta Combination Compound 34 CAGES 35-36 Omega Cycle Cage 35 Lambda Cycle Cage 36 CYCLE LOCKERS 37 Sigma Horizontal Cycle Locker 37 Sigma Semi-Vertical Cycle Locker 37 RACKS AND STANDS 38-41 NU Double-Sided Cycle Rack 38 NU Sheffield Cycle Stand 39 NU Single-Sided Scooter Stand 40 NU Double-Sided Scooter Stand 40 Economy NU Single-Sided Scooter Stand 40 Economy NU Double-Sided Scooter Stand 40 OUTDOOR CLASSROOMS 41 Outdoor Classroom 41 LARGE UMBRELLAS 42-43 Zeta Umbrellas 42 WAITING, SMOKING AND PEDESTRIAN SHELTERS 44-47 Theta Waiting Shelter 44 Theta Waiting Shelter with Seating 45 Alpha T Waiting Shelter with Seating 46 Beta Waiting Shelter with Seating 47 PRAM/BUGGY SHELTERS 48 Hera Pram Store 48 Domed Roof Pram Shelter 49 Theta Buggy Shelter 50 Eta Buggy Shelter 51 YOUTH SHELTERS 53-54 Omicron Youth Shelter 51 Epsilon Youth Shelter 52 Sunburst Youth Shelter 54 MOBILITY SCOOTER/LOCKER SHELTERS 55-57 Mobility Scooter Shelters 55 Helmet Lockers 56 Cigarette Bins 56 Locker Shelters 57 WALKWAYS AND ENTRANCE CANOPIES 58-63 Paisley Entrance Canopies 59 Stirling Entrance Canopy 60 Dundee Entrance Canopy 61 Dumfries Lattice Walkway 62 Bin Compound 63 Theta Shelter incorporating Integral Single-sided Scooter Rack 63 SMOKING SHELTERS 64-65 Olympic Smoking Shelter 64 Theta Smoking Shelter 65 BOOT AND SHOE CLEANERS 66-67 Perseus Boot and Shoe Cleaner 66 Theseus Boot and Shoe Cleaner 67 Hercules Boot and Shoe Cleaner 67 02 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 03

Introduction A RANGE OF QUALITY SHELTERS AND ASSOCIATED STREET FURNITURE AT AFFORDABLE PRICES As well as our standard range of products, goods can be custom-made to tailor-suit a specific site or requirement. Our team has over 20 years experience in the design, manufacture and installation of street furniture. Risk assessments and method statements are carried out in accordance with CDM regulations. All work is covered by our Personal Indemnity Insurance. If necessary, where planning permission is required, a qualified architect will facilitate the application on your behalf. Costs for this service will vary for each project. Shelters are designed to meet the structural integrity standard BS 5950-1990 (structural use of steelwork in building, Part 1). Goods and installations are guaranteed for 12 months parts and labour. All shelters are supplied in kit form with comprehensive installation instructions for ease of assembly. Alternatively, we can provide a full quotation for the manufacture, delivery and installation including ground works, where necessary. We offer a free-ofcharge nationwide site survey to assess the site and offer expert advice on the most suitable product for the application. Please note, that if you are installing a full concrete plinth for a shelter, please allow an additional 500mm of concrete to the width and length of the base. STEEL WORK FINISHES Hot dipped galvanised to BS EN ISO 1461:1999 This treatment offers a low-maintenance, long-lasting finish for all types of environment. It is dull silver in appearance. If requested when ordering, a certificate of conformity can be supplied. POLYESTER POWDER COATING Powder coating has excellent outdoor exposure qualities, as well as offering an attractive consistent appearance in a variety of colours. The importance of the finish is not only the visible top coat, but, equally, the pre-treatment of the steelwork. All Apex products are shot blast to SA2.5 to degrease the surface and provide a key for the subsequent processes. The steel is then etch-primed with Zinc Phosphate anti-corrosive Primer then the final coat of Polyester Powder is electrostatically sprayed onto the surface to a thickness of 80-110 microns. The treated steelwork is then heat-cured, melting the Polyester Powder into a continuous phase and bonding it into the steelwork. Polyester Powder Coats give high durability and high resistance to weathering plus excellent colour stability. Another option available for powder coating is Extra Life. This is a programme of coating systems that offers product protection for up to 12 years. It incorporates the latest powder primer technologies. Please ask our Sales Department for a quotation with Extra Life. DELIVERY From receipt of order smaller items take approximately 3-4 weeks delivery. Shelters are on a 5-6 weeks lead time from order. Bespoke products are 6-8 weeks from acceptance of drawings. If you require goods sooner, please ask as we can sometimes improve on these estimates. CONDITIONS OF SALE Prices quoted are current at the date of printing. Please use these costs as a guide reference only, due to fluctuations in raw materials. Please contact our sales department for a full quotation. All prices exclude delivery charges, Due to printing limitations colours may vary slightly to those shown in the brochure. Dimensions are approximate and shown in millimeters. Company Conditions of Sale are available upon request. 04 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 05

Colour Chart Roofing Materials There many stock colours to choose from so we have listed our most popular colours below; RAL 9005 Black RAL 6002 Forest Green BS 18 E 53 Solent Blue BS 18 B 25 Merlin Grey Polyethylene Terephthalate (PET) These high quality sheets are solid plastic available in transparent, smoked grey or opaque. They are extremely impact-resistant and have an excellent fire rating complying with BS 476:Part 7. The resistance to weathering is guaranteed for 5 years (10 year available upon request). They have a high chemical resistance so even graffiti can be removed using an acetone free solvent cleaner. PET is environmentally friendly with ideal re-cycling properties. If not specified the sheets will be supplied in 5mm thick transparent for the cladding. There is an 8mm option available in both transparent and opaque there would be an additional charge for this option. Plastisol Coated Steel Plastisol cladding (HP200 ) offers excellent resistance to corrosion and moderate weather resistance. Guaranteed for a minimum of 10 years, it presents a hard-wearing option available in 6 standard colours:- Jade 14C37 Country Green Juniper Green 12B29 Slate Blue 18829 Willow 12B17 Moorland Green 12B21 RAL 9010 White RAL 5013 Dark Blue RAL 1023 - Yellow RAL 3004 - Burgundy If, however, you require a colour we do not stock, this will incur an additional charge. Alternatively we can match your required colour to the nearest stock BS or RAL Colour. Please speak to our Sales Department. Forest Green RAL6002 Olive Green 12B27 Ivory RAL9002 Mushroom 10B19 New Grey 10B23 Merlin Grey 18B25 BS 00 A 05 Light Grey BS 04 E 53 Poppy Red If requested, goods can be polyester powder coated on top of the galvanized finish to give a more durable resistance in extreme weather conditions. This does give the products a rougher texture than the standard powder coating due to the galvanized undercoat. White 00E55 Pigeon Grey 18B17 Goosewing Grey 10A05 Black 00E53 New Red 04D44 Buttermilk 10C31 Bamboo 08C35 Vandyke Brown 08B29 Terracotta 04C39 Wedgewood Blue 18C37 Ocean Blue 18C39 Pacific Blue 18E58 CODES To try and simplify our catalogue referencing a number of standard pre-fixed are used throughout relating cladding and racks. An example of this is the Theta Tbep ir12, Theta is the model, Tbep transparent roof, back panel and end panels and integral rack for 12 cycles. A key is listed below to refer to: The reverse of the plastisol sheet comes as standard in a grey polyester. The exposed face is supplied in a 200 micron external grade PVC coating. The sheeting is noncombustible and will not contribute to a fire. The roofing sheets achieve a Class 0 rating in the Building Regulations. Picture shows example of the plastisol cladding in Solent Blue BS 18 E 53 P Plastisol Roof Cladding Pep Plastisol Roof and Transparent End Panels T 5mm thick transparent PET roofing Tep 5mm thick transparent PET roofing and end panels B back panel, this can be plastisol or PET ir Integral Rack, if there is a number following this it relates to the capacity of cycles the rack holds. R floor-mounted rack imc Motorcycle Rack SCS Single-sided Scooter Rack SCD Double-sided Scooter Rack BF Base Fix SF Submerged Fixed P Pedestal I Integral AD Additional Bay/Unit Jnr Junior Cycles, if sub-fixed after the shelter, it refers to a smaller style shelter and rack if sub-fixed after the rack it depicts a junior style rack. 06 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 07

Alpha Cycle and Motorcycle Shelter Contemporary Shelter suitable to accommodate cycles and/or motorcycles. Cycle racks can be adapted to hold junior cycles and/or scooters (shelter showing the incorporated scooter racks is shown on P54). Motorcycles can be free-standing or the shelter can be manufactured with an integral locking rail to the rear of the shelter so motorcycles can be secured via chain or D lock. Lockers can also be incorporated into the shelter please see image on P55 showing this. are supplied in a flat pack form with full technical Lengths: 2560mm, 3060mm, 4060mm and 5060mm Capacity: 6 cycles or 2-3 motorcycles, 8 cycles or 3-4 motorcycles, 10 cycles or 4-5 motorcycles, 12 cycles or 5-6 motorcycles respectively Overall width: 2100mm ALPHA P ir CYCLE SHELTER Loading: Single-sided into integral fully welded cycle racks. If required, racks can be floor-mounted. If junior versions are required, please contact the sales department. Please enquire to the sales department if shelters are required to meet the BREEAM standards as the racks need to be spaced at 1000mm centres. Alpha P ir6 1,006.00 Alpha P ir8 1,204.00 Alpha P ir10 1,340.00 Alpha P ir12 1,466.00 ALPHA IMC MOTORCYCLE SHELTERS Loading: Integral fully welded rail to rear of shelter for securing motorcycles. Picture shows a bank of 2 Alpha Tep ir12 Shelters with End Panels END PANELS (EP) 5mm thick Transparent PET End Panels are available for the Alpha Shelter Roofing: Plastisol Coated Steel to a standard Colour on P7 (Alpha P) or 5mm thick transparent PET (Alpha T) ALPHA T ir CYCLE SHELTER Alpha T ir6 1,180.00 Alpha T ir8 1,325.00 Alpha T ir10 1,604.00 Alpha T ir12 1,795.00 ALPHA P imc MOTORCYCLE SHELTERS Alpha P imc 2.5m 937.00 Alpha P imc 3m 1,115.00 Alpha P imc 4m 1,210.00 Alpha P imc-5m 1,310.00 Price per end panel 167.50 ALPHA T imc MOTORCYCLE SHELTERS Alpha T imc2.5 L: 2560mm 1,100.00 Alpha T imc3 L: 3060mm 1,220.00 Alpha T imc4 L: 4060mm 1,415.00 Alpha T imc5 L: 5060mm 1,635.00 Picture shows 2 Alpha Pep ir12 shelters with end panels ADDITIONAL BAYS Alpha Shelters can be supplied any length to suit your requirements. Picture shows bank of 2 Alpha Shelters 1 with motorcycles and 1 for cycles Picture shows a bank of 2 Alpha P ir12 Shelters 08 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 09

Economy Alpha Cycle and Motorcycle Shelter Junior Alpha Cycle Shelter JUNIOR ALPHA ir CYCLE SHELTER Due to the popularity of the Alpha Shelter, an economy shelter has been designed to enable you to keep the aesthetics, whilst reducing costs. The shelters are supplied with floor-mounted cycle racks or motorcycle locking rail, or alternatively motorcycles can be free-standing in the shelter. Lengths: 2060 and 4060mm Capacity: 5 cycles and 2 motorcycles or 10 cycles or 4-5 motorcycles Loading: Into floor-mounted cycle rack ECONOMY ALPHA R CYCLE SHELTER Loading: Single-sided into floor-mounted fully welded cycle racks. If junior versions are required, please contact the sales department. Alpha Curved Shelter to suit junior cycles and/or scooters Lengths: 4060mm Capacity: 12 junior cycles Overall width: 1800mm Height to front: 1500mm Loading: Single-sided into integral fully welded cycle racks. If required, racks can be floor-mounted. If junior versions are required, please contact the sales department. Alpha Junior P ir12 1,115.00 Alpha Junior T ir12 1,195.00 END PANELS (EP) Junior Alpha End Panels are available in 5mm thick transparent PET Price per end panel 1,54.00 Overall width: 2100mm Roofing: Plastisol Coated Steel to a standard Colour on P7 or 5mm thick transparent PET Economy Alpha P R10 1,230.00 Economy Alpha T R10 1,478.00 Loading: floor-mounted fully welded rail to rear of shelter for securing motorcycles. Economy Alpha P imc6 1,036.00 Economy Alpha T imc5 1,285.00 END PANELS (EP) End Panels 5mm thick transparent PET Price per end panel 155.50 Roofing: Plastisol Coated Steel to a standard Colour on P7 Shelters have been designed for ease of installation and ADDITIONAL BAYS Shelters can be supplied any length to suit your requirements. Please call the sales office for a quotation. Picture shows... 10 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 11

Beta Cycle and Motorcycle Shelters Beta shelters are suitable to accommodate cycle and/or motorcycles. Cycle racks can be adapted to hold junior cycles and/or scooters. Motorcycles can be free-standing or the shelter can be supplied with a locking rail to the rear of the shelter so motorcycles can be secured via a chain or D lock. installation instructions. If installing a concrete plinth allow and additional 500mm concrete to front and width of the shelter. A full nationwide installation service is available including ground-works. Please contact the sales office for further information. Lengths: 2560mm, 3060mm, 4060mm and 5060mm Capacity: 6 cycles or 2-3 motorcycles, 8 cycles or 3-4 motorcycles, 10 cycles or 4-5 motorcycles, 12 cycles or 5-6 motorcycles respectively Overall width: 2100mm BETA CYCLE SHELTERS Loading: Single-sided into integral fully welded cycle racks. If required, racks can be floor-mounted. If junior versions are required, please contact the sales department. BETA imc MOTORCYCLE SHELTERS ADDITIONAL BAYS Picture shows a Beta P shelter to hold motorcycles Roofing: Plastisol Coated Steel to a standard colour see colour chart P7 or 5mm thick transparent PET Fixing: Adjustable base plates for bolting to concrete or BETA P ircycle SHELTERS Beta P ir6 1,190.00 Beta P ir8 1,295.00 Beta P ir10 1,405.00 Beta P ir12 1,522.00 BETA T ircycle SHELTERS Beta T ir6 1,378.00 Beta T ir8 1,482.00 Beta T ir10 1,570.00 Beta T ir12 1,644.00 Picture shows a bank of 2 Beta P ir12 Shelters Loading: Integral fully welded rail to rear of shelter for securing motorcycles. BETA P imc MOTORCYCLE SHELTERS Beta P imc 2.5m 1,050.00 Beta P imc 3m 1,125.00 Beta P imc 4m 1,225.00 Beta P imc-5m 1,318.00 BETA T imc MOTORCYCLE SHELTERS Beta T imc 2.5m 1,240.00 Beta T imc 3m 1,260.00 Beta T imc 4m 1,408.00 Beta T imc-5m 1,460.00 Shelters can be supplied any length to suit your requirements. Please call the sales office for a quotation. Picture shows a bank of Beta Shelters to cover existing racks 12 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 13

Theta Cycle and Motorcycle Shelter The Theta shelter is ideal for sorting either cycle and/or motorcycles. Cycle racks can be adapted to hold junior cycles and scooters. Motorcycles can be free-standing or the shelter can be supplied with a locking rail to the rear of the shelter so motorcycles can be secured via a D lock. Lengths: 2560mm, 3060mm, 4060mm and 5060mm Capacity: 6 cycles or 2-3 motorcycles, 8 cycles or 3-4 motorcycles, 10 cycles or 4-5 motorcycles, 12 cycles or 5-6 motorcycles respectively Overall width: 2100mm THETA CYCLE SHELTER Loading: Single-sided into integral fully welded cycle racks. If required, racks can be floor-mounted. If junior versions are required, please contact the sales department. THETA P ir CYCLE SHELTER Roofing: Plastisol Coated Steel to a standard Colour on P7 or 5mm thick transparent PET Theta P ir6 1,138.00 Theta P ir8 1,223.00 Theta P ir10 1,347.00 Theta P ir12 1,463.00 THETA T ir CYCLE SHELTER Theta T ir6 1,150.00 Theta T ir8 1,234.00 Theta T ir10 1,432.00 Theta T ir12 1,567.00 THETA IMC MOTORCYCLE SHELTERS Loading: Integral fully welded rail to rear of shelter for securing motorcycles. Picture shows a Theta Tbep ir12 cycle with transparent roof, back and end panels ADDITIONAL BAYS Shelters can be supplied any length to suit your requirements. THETA P imc MOTORCYCLE SHELTERS Please call the sales office for a quotation. Picture shows a bank of 3 Theta Pbep ir12 Shelters with bespoke back panels and end panels Theta P imc2.5 1,025.00 Theta P imc3 1,070.00 Theta P imc4 1,165.00 Theta P imc5 1,260.00 THETA T imc MOTORCYCLE SHELTERS Theta T imc 2.5m 1,033.00 Theta T imc 3m 1,068.00 Theta T imc 4m 1,250.00 Theta T imc-5m 1,335.00 Picture shows a Theta Cycle Compound clad with hardwood panels END PANELS (EP) Theta End Panels are available in 5mm thick transparent PET Price per end panel 164.00 BACK PANELS Back panels Plastisol Coated Steel 135.00 based on 5m shelter Back panels 5mm thick transparent PET 399.00 based on 5m shelter 14 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 15

Eta Infant Shelter The Eta Shelter is a infant adaptation of our popular Alpha Shelter. The shelter has a floor-mounted nu toastrack cycle rack. Lengths: 2560mm Capacity: 8 junior cycles Overall width: 1200mm Height to front: 1200mm Roofing: 5mm thick transparent PET End Panels: 5mm thick transparent PET Loading: single-sided into floor-mounted fully welded cycle rack. Eta Tep R8 CYCLE SHELTER - 1,235.00 ADDITIONAL BAYS Shelters can be supplied any length to suit your requirements. Picture shows Eta Tep General Shelter 16 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 17

Delta Cycle and Motorcycle Shelter The Delta shelter is a dual access shelter for sorting either cycle and/or motorcycles. Cycle racks can be adapted to hold junior cycles and scooters. Motorcycles can be free-standing or the shelter can be supplied with a locking rail to the rear of the shelter so motorcycles can be secured via a D lock. Lengths: 2560mm, 3060mm, 4060mm and 5060mm Capacity: 12 cycles or 4-6 motorcycles, 16 cycles or 6-8 motorcycles, 20 cycles or 8-10 motorcycles, 24 cycles or 10-12 motorcycles respectively Overall width: 3800mm Roofing: Plastisol Coated Steel to a standard Colour on P7 (Alternatively, shelter can be fitted with 5mm thick transparent PET please ask the Sales Office for prices) DELTA ir CYCLE SHELTER Double-sided into integral fully welded cycle racks. If required, racks can be floor-mounted. If junior versions are required, please contact the sales department. DELTA P ir CYCLE SHELTER Delta P ir12 1,810.00 Delta P ir16 1,897.00 Delta P ir20 2,135.00 Delta P ir24 2,324.00 DELTA T ir CYCLE SHELTER Delta T ir12 2,200.00 Delta T ir16 2,297.00 Delta T ir20 2,535.00 Delta T ir24 2,818.00 Picture shows a Delta P ir24 Shelter DELTA imc MOTORCYCLE SHELTERS Loading: Integral fully welded rail to rear of shelter for securing motorcycles. DELTA P imc MOTORCYCLE SHELTERS Delta P imc 2.5m 1,595.00 Delta P imc 3m 1,624.00 Delta P imc 4m 1,834.00 Delta P imc-5m 1,975.00 Picture shows a Delta Shelter with a motorcycle rail one side of shelter and a cycle rack on the alternate END PANELS (EP) End Panels 5mm thick transparent PET Price per end panel 320.00 ADDITIONAL BAYS Shelters can be supplied any length to suit your requirements. DELTA T imc MOTORCYCLE SHELTERS Delta T imc 2.5m 1,900.00 Delta T imc 3m 1,995.00 Delta T imc 4m 2,233.00 Delta T imc-5m 2,470.00 Please call the sales office for a quotation Picture shows a bank of 5 Delta P ir24 Shelters 18 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 19

Gamma Cycle and Motorcycle Shelter The Gamma shelter is a dual access shelter for sorting either cycle and/or motorcycles. Cycle racks can be adapted to hold junior cycles and scooters. Motorcycles can be free-standing or the shelter can be supplied with a locking rail to the rear of the shelter so motorcycles can be secured via a D lock. Lengths: 2560mm, 3060mm, 4060mm and 5060mm Capacity: 12 cycles or 4-6 motorcycles, 16 cycles or 6-8 motorcycles, 20 cycles or 8-10 motorcycles, 24 cycles or 10-12 motorcycles respectively Overall width: 3800mm GAMMA ir CYCLE SHELTER Double-sided into integral fully welded cycle racks. If required, racks can be floor-mounted. If junior versions are required, please contact the sales department. Please enquire to the sales department if shelters are required to meet the BREEAM standards as the racks need to be spaced at 1000mm centres. Roofing: Plastisol Coated Steel to a standard Colour on P7 (Alternatively, the shelter could be fitted with 16mm triple wall polycarbonate) GAMMA P ir CYCLE SHELTER Gamma P ir12 1,757.00 Gamma P ir16 1,853.00 Gamma P ir20 2,045.00 Gamma P ir24 2,237.00 GAMMA imc MOTORCYCLE SHELTERS END PANELS (EP) Picture shows... GAMMA T ir CYCLE SHELTER Gamma T ir12 1,885.00 Gamma T ir16 2,205.00 Gamma T ir20 2,562.00 Gamma T ir24 2,928.00 Picture shows a Gamma P ir24 Shelter Loading: Integral fully welded rail to rear of shelter for securing motorcycles. GAMMA P imc MOTORCYCLE SHELTERS Gamma P imc - 2.5m 1,600.00 Gamma P imc - 3m 1,714.00 Gamma P imc - 4m 1,905.00 Gamma P imc - 5m 2,040.00 GAMMA T imc MOTORCYCLE SHELTERS Gamma T imc - 2.5m 1,850.00 Gamma T imc - 3m 1,980.00 Gamma T imc - 4m 2,345.00 Gamma T imc - 5m 2,658.00 Gamma End Panels are available in 5mm thick transparent PET Price per end panel 330.00 ADDITIONAL BAYS Shelters can be supplied any length to suit your requirements. Please call the sales office for a quotation Picture shows a bank of 3 Gamma Pep ir24 Shelters with lockable sliding gates 20 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 21

Castor Cycle and Motorcycle Shelter High-tech shelter suitable to accommodate both cycles and/or motorcycles. Manufactured with perforated sheets to the lower part of the shelter and solid transparent sheeting to upper, complete with a 16mm triple wall polycarbonate roof. Castor R10 1,720.00 Lengths: 4060mm Capacity: 20 cycles or 8-10 motorcycles Overall width: 2100mm Height to front: 2550mm Roofing: 16mm triple wall polycarbonate Picture shows Castor R10 22 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 23

Alpha Cycle and Motorcycle Compound Gates can be added to the Alpha Shelter to provide additional security. Gates are fitted with a hasp and staple (as standard) for padlocking. Padlocks are not supplied. Alternative locking methods, such as key operated or coin retain/return can be incorporated. See page 25 for Locking Mechanisms. If the area is restricted sliding gates could reduce the footprint of the shelter. Lengths: 4060mm and 5060mm, other sizes are available Capacity: 10 cycles or 4-5 motorcycles, 12 cycles or 5-6 motorcycles respectively Overall width: 2100mm Roofing: Plastisol Coated Steel to a standards BS or RAL Colour or 5mm thick Transparent PET End Panels: 5mm thick transparent PET ALPHA ir CYCLE COMPOUND Loading single-sided into integral fully welded cycle racks. If required, racks can be floor-mounted. If junior versions are required, please contact the sales department. Please enquire to the sales department if shelters are required to meet the BREEAM standards as the racks need to be spaced at 1000mm centres. ALPHA PEP ir CYCLE COMPOUND Alpha Pep Comp ir10 2,175.00 Alpha Pep Comp ir12 2,340.00 ALPHA TEP ir CYCLE COMPOUND Alpha Tep Comp ir10 2,545.00 Alpha Tep Comp ir12 2,810.00 Picture shows a Bank of 3 Alpha Tep ir12 shelters with End Panels and Sliding Gates Picture shows a Bank of 2 Alpha Tep ir12 Shelters with End Panels and Front-Opening Gates LOCKING MECHANISMS A range of locking mechanisms are available; including a hasp and staple, which is fitted as standard, unless specified, a sliding bolt, (padlocks are not supplied with either above option), a coin return/retain or a card swipe system. 24 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 25

Theta Cycle and Motorcycle Compound Wooden Shelters Gates can be added to the Theta Shelter to provide additional security. Gates are fitted with a hasp and staple (as standard) for padlocking. Padlocks are not supplied. Alternative locking methods, such as key operated or coin retain/return can be incorporated. See Page 25 for locking mechanisms. If the area is restricted sliding gates could reduce the footprint of the shelter. Lengths: 4060mm and 5060mm, other sizes are available Capacity: 10 cycles or 4-5 motorcycles, 12 cycles or 5-6 motorcycles respectively Overall width: 2100mm Roofing: Plastisol Coated Steel to a standards BS or RAL Colour or 5mm thick Transparent PET End Panels: 5mm thick transparent PET Back Panels: Plastisol Coated Steel to a standards BS or RAL Colour or 5mm thick Transparent PET THETA TBEP ir CYCLE COMPOUND Loading single-sided into integral fully welded cycle racks. If required, racks can be floor-mounted. If junior versions are required, please contact the sales department. Please enquire to the sales department if shelters are required to meet the BREEAM standards as the racks need to be spaced at 1000mm centres. Theta Pbep COMP ir10 2,298.00 Theta Pbep COMP ir12 2,472.00 Theta Tbep COMP ir10 2,526.00 Theta Tbep COMP ir12 2,875.00 Picture shows a Theta Pbep Compound with transparent back, front, gate and end panels and plastisol roof Picture shows a Theta Pbep Compound with a motorcycle locking rail inside If required, some shelters can be manufactured to be able to accommodate wooden slats. The wood can be supplied by yourselves or supplied by Apex Shelter Systems. The above shelter shows the Theta Shelter which was manufactured with additional struts to enable the customer to clad the shelter after it was delivered to site. What is BREEAM? BREEAM is a tool to measure the sustainability of non-domestic buildings in the UK. By using a straightforward scoring system BREEAM addresses a wide-range of environmental and sustainability issues and enables developers and designers to prove the environmental credentials of their buildings to planners and clients. BREEAM Compliant Cycle Storage Facilities > Racks positioned in a circular array and spaced in accordance with the guidance in the New Metric Handbook. > There is a minimum distance from any obstruction of 300mm for single-sided use and 900mm for double-sided use. > Adequate Lighting is provided in accordance with BS5489 part 1. What are the BREEAM Requirements for Cycle Storage? > The space is covered overhead and protected from rain > The covered area and the cycle racks are set in or fixed to a permanent structure and allow both the wheel and the frame to be locked securely. Our racks are located in a locked structure fixed to or part of a permanent structure with CCTV surveillance. > There is a minimum distance of 1.0m between cycle racks, where the racks allow for two-sided parking, and 0.8m for one-sided parking to enable bikes to be easily stored and accessed. > The facilities are in a prominent site location that is viewable from the building. > The majority of the cycle racks are within 100m of a building entrance (ideally within 50m). Or, in the case of further or higher education buildings on a campus, where it is not feasible to meet the 100m requirement the assessor justifiably deems that the facilities are in an easily accessible location for building users, the credit may still be awarded. Any of our cycle shelters can be manufactured in accordance with BREEAM. Please notify the Sales Department when requesting a quotation, as the rack spacings differ to standard. 26 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 27

Alpha Cycle and Motorcycle Compound Alpha Shelters can be used to create a lockable compound by opposing 2 shelters. Lockable gates can be fitted to one or both sides allowing 2 entrances. Alternatively, one side can be fitted with a fixed security panel. A variety of locking mechanisms are available for the gate, including a hasp and staple (which is fitted as standard) or a sliding bolt, (padlocks are not supplied with either option), a coin return or a coin retain or a card swipe system are also available. Roof panels can be fitted to the walkway to provide enhanced weather protection. Vandal-resistant lighting can also be installed as required. Lengths: 4060mm and 5060mm, other sizes are available Capacity: 20 cycles or 8-10 motorcycles, 24 cycles or 10-12 motorcycles respectively Overall width: 6000mm Height to highest point: 2100mm Roofing: Plastisol Coated Steel to a standards BS or RAL Colour or 5mm thick Transparent PET Prices quoted are shown for 2 opposing single units with both a gate and a fixed panel or 2 gates and polyester Powder Coated to a standard colour. OP/ALPHA TEP ir CYCLE COMPOUND Single or dual access compound with fully welded integral cycle racks. If required, racks can be floormounted. If junior versions or motorcycle racks are required, please contact the sales department. Please enquire to the sales department if shelters are required to meet the BREEAM standards as the racks need to be spaced at 1000mm centres. OP/Alpha Tep COMP ir20 4,485.00 OP/Alpha Tep COMP ir24 4,860.00 ENHANCED WEATHER PROTECTION Price per 4m section 500.00 Price per 5m section 520.00 End Panels: 5mm thick transparent PET Picture shows a bank of 2 OP/Alpha compound with covered walkway 28 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 29

Opposing Theta Cycle and Motorcycle Compounds Castor Cycle and Motorcycle Compound Theta Shelters can be used to create a lockable compound by opposing 2 shelters. Lockable gates can be fitted to one or both sides allowing 2 entrances. Alternatively, one side can be fitted with a fixed security panel. A variety of locking mechanisms are available for the gate, including a hasp and staple (which is fitted as standard) or a sliding bolt, (padlocks are not supplied with either option), a coin return or a coin retain or a card swipe system are also available. Roof panels can be fitted to the walkway to provide enhanced weather protection. Vandalresistant lighting can also be installed as required. Prices quoted are shown for 2 opposing single units with both a gate and a fixed panel or 2 gates and polyester Powder Coated to a standard colour. OP/THETA TEP ir CYCLE COMPOUND High-tech secure compound suitable to accommodate both cycles and/or motorcycles. Manufactured with perforated sheets to the lower part of the shelter and solid transparent sheeting to upper, complete with a 16mm triple wall polycarbonate roof. Lengths: 4060mm Capacity: 10 cycles or 4-5 motorcycles Price on application Lengths: 4060mm and 5060mm, other sizes are available Capacity: 20 cycles or 8-10 motorcycles, 24 cycles or 10-12 motorcycles respectively Overall width: 6000mm Height to highest point: 2100mm Roofing: Plastisol Coated Steel to a standards BS or RAL Colour or 5mm thick Transparent PET Single or dual access compound with fully welded integral cycle racks. If required, racks can be floormounted. If junior versions or motorcycle racks are required, please contact the sales department. Please enquire to the sales department if shelters are required to meet the BREEAM standards as the racks need to be spaced at 1000mm centres. OP/Theta Tep ir20 COMP 4,404.00 OP/Theta Tep ir24 COMP 4,736.00 ENHANCED WEATHER PROTECTION Price per 4m section 500.00 Price per 5m section 520.00 Overall width: 6000mm Roofing: 16mm triple wall polycarbonate Picture shows Castor Compound End Panels: 5mm thick transparent PET Back Panels: Plastisol Coated Steel to a standards BS or RAL Colour or 5mm thick Transparent PET Picture shows an OP/Theta Tbep ir24 compound with a set of lockers 30 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 31

Alpha Gamma Combination Cycle and Motorcycle Compounds ENHANCED WEATHER PROTECTION This compound uses the Alpha and Gamma Shelters to make valuable use of larger areas. Two lockable gates can be fitted to one or both sides of the compound allowing 4 entrances. Alternatively, one side of the compound can be fitted with fixed security panels to prevent access. A variety of locking mechanisms are available for the gate, including a hasp and staple (which is fitted as standard) or a sliding bolt, (padlocks are not supplied with either option), a coin return or a coin retain or a card swipe system are also available. Roof panels can be fitted to the walkway to provide enhanced weather protection. Vandal-resistant lighting can also be installed as required. Lengths: 4060mm and 5060mm, other sizes are available Capacity: 40 cycles or 16-20 motorcycles, 48 cycles or 20-24 motorcycles respectively Overall width: 11000mm Height to highest point: 2100mm Roofing: Plastisol Coated Steel to a standards BS or RAL Colour and/or 5mm thick Transparent PET End Panels: 5mm thick transparent PET Picture shows an Alpha T Gamma P compound to hold 144 cycles Prices quoted are shown for 2 opposing single Alpha units and a central Gamma Unit with 2 gates and 2 fixed panels or 4 gates, polyester Powder Coated to a standard colour. ALPHA GAMMA SECURE CYCLE COMPOUND Single or dual access compound with fully welded integral cycle racks. If required, racks can be floormounted. If junior versions or motorcycle racks are required, please contact the sales department. Please enquire to the sales department if shelters are required to meet the BREEAM standards as the racks need to be spaced at 1000mm centres. Alpha Pep Gamma Pep ir40 COMP 7,306.00 Alpha Tep Gamma Pep ir40 COMP 7,872.00 Alpha Tep Gamma Tep ir40 COMP 8,313.00 Price per 4m section 1,000.00 Price per 5m section 1,040.00 ADDITIONAL SECURITY For extra security within a compound why not have another enclosure within the compound. The gates can either be solid steel bars or fully clad with 5mm thick PET. Gates can be added to each side of the shelter for extra security. Cost per 5m Shelter 1,120.00 Alpha Pep Gamma Pep ir48 COMP 7,743.00 Alpha Tep Gamma Pep ir48 COMP 8,437.00 Alpha Tep Gamma Tep ir48 COMP 9,054.00 Picture shows Alpha Tep Gamma Tep ir40 COMP 32 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 33

Theta Delta Cycle and Motorcycle Compounds Omega Cycle Cage This compound uses a combination of the Theta and Delta Shelters to make valuable use of larger areas. Two lockable gates can be fitted to one or both sides of the compound allowing 4 entrances. Alternatively, one side of the compound can be fitted with fixed security panels to prevent access. A variety of locking mechanisms are available for the gate, including a hasp and staple (which is fitted as standard) or a sliding bolt, (padlocks are not supplied with either option), a coin return or a coin retain or a card swipe system are also available. Roof panels can be fitted to the walkway to provide enhanced weather protection. Vandal-resistant lighting can also be installed as required. Prices quoted are shown for 2 opposing single Theta units and a central Delta Unit with 2 gates and 2 fixed panels or 4 gates and polyester Powder Coated to a standard colour. THETA DELTA CYCLE COMPOUND Single access compound with floor-mounted cycle racks. If junior versions or motorcycle racks are required, please contact the sales department. The Omega Security Cage is ideal for the external storage of cycles, motorcycles or scooter racks. The robust mesh panels provide both high security and visibility. Lengths: 4060mm and 5060mm, other sizes are available Capacity: 10 cycles or 4-5 motorcycles, 12 cycles or 5-6 motorcycles respectively Overall width: 2500mm Height to highest point: 2150mm OMEGA CYCLE CAGE Single access compound with floor-mounted cycle racks. If junior versions or motorcycle racks are required, please contact the sales department. Omega P R10 3,565.00 Omega P R12 3,705.00 Lengths: 4060mm and 5060mm, other sizes are available Capacity: 40 cycles or 16-20 motorcycles, 48 cycles or 20-24 motorcycles respectively Overall width: 11000mm Height to highest point: 2100mm Roofing: Plastisol Coated Steel to a standards BS or RAL Colour P7 and/or 5mm thick Transparent PET Theta Pbep Delta Pep ir40 COMP 7,835.00 Theta Tbep Delta Pep ir40 COMP 8,053.00 Theta Tbep Delta Tep ir40 COMP 8,320.00 Theta Pbep Delta Pep ir48 COMP 8,356.00 Theta Tbep Delta Pep ir48 COMP 8,610.00 Theta Tbep Delta Tep ir48 COMP 9,018.00 ENHANCED WEATHER PROTECTION Price per 4m section 1,000.00 Price per 5m section 1,040.00 Finish: Hot dipped galvanized to BS EN ISO 1461:1999 Roofing: Plastisol Coated Steel to a standards BS or RAL Colour Fixing: Base Fixed End Panels: 5mm thick transparent PET Fixing: Adjustable base plates for bolting to concrete or 34 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 35

Lambda Cycle Cage Sigma Cycle Lockers The Lambda Security Cage is ideal for the external storage of cycles, motorcycles or scooter racks. Individual Semi-vertical or Horizontal Cycle Lockers supplied with a perforated viewing panel to the door. Coat and helmet hooks are fitted inside the door. A wheel support is inside the locker to guide the cycle via a front wheel support to secure it. Lengths: 1200mm Semi-Vertical or 1900mm Horizontal Capacity: 1 cycle Overall width: 800mm Lengths: 4060mm and 5060mm, other sizes are available Capacity: 20 cycles or 8-10 motorcycles, 24 cycles or 10-12 motorcycles respectively Overall width: 5000mm Height to lowest point: 2500mm Finish: Hot dipped galvanized to BS EN ISO 1461:1999 Roofing: Plastisol Coated Steel to a standards BS or RAL Colour Fixing: Base Fixed LAMBDA CYCLE CAGE Single access compound with floor-mounted cycle racks. If junior versions or motorcycle racks are required, please contact the sales department. Lambda P R20 5,632.00 Lambda P R24 5,880.00 Lockers are manufactured from galvanized panels with either a sloped roof or an apex roof. The door is fitted with a piano hinge and three point locking mechanism. Other cladding options are available; perforated steel sheeting, transparent sheets, plastisol sheets or mesh panels. A variety of locking mechanisms are available including a hasp and staple which is supplied as standard, a T-handle, a coin return, a coin retain or a card swipe system. Double-sided lockers for 2 cycles are available, please ask the Sales Department for details. Height to lowest point: 1100mm Semi-Vertical or 1950mm Horizontal Finish: Polyester Powder Coated to a standard BS or RAL Colour Fixing: Base Fixed installation instructions. Alternatively, a full, nationwide installation service is available including groundworks. Picture shows the Lambda Cage for Scooter Racks with the option for clear back and sides Lockers are supplied fully assembled with 4 prepunched for securing into position. A full nationwide installation service is available including groundworks. Sigma Semi-Vertical 620.00 Sigma Horizontal 620.00 Picture shows a Bank of 6 Sigma Lockers 36 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 37

Nu R Double-Sided Floor Mounted Cycle Racks Nu Sheffield Cycle Stands This double-sided cycle rack enables the storage of 2 cycles per loop. The standard centres are 750mm; however, these can be increased to 800mm, 900mm or 1000mm to comply with BREEAM, if requested. The rack is fully welded with 4 pre-punched base plates for bolting to concrete. This model is also available in stainless steel at an extra cost. Lengths: 1500mm, 3000mm or 3750mm Capacity: 6, 10 or 12 cycles Overall width: 750mm Height: 800mm These racks are supplied fully welded for bolting into concrete or setting into concrete. Larger racks may be sent in more than one length for bolting together on site. Nu- R6 205.00 6cycles Nu- R10 255.00 10 cycles Nu- R12 320.00 12 cycles These racks are also available for infant/junior cycles ref. Nu R10 jnr Nu- R6jnr 185.00 6 junior cycles Nu- R10jnr 235.00 10 junior cycles Nu- R12jnr 300.00 12 junior cycles Tubular cycle stand which can be supplied with base plates for bolting to concrete or with extended legs for setting into concrete. It is also available in stainless steel at an extra cost. Capacity: 1-2 cycles Overall width: 750mm Height: 800mm Diameter: 42.4mm x 3.2mm Finish: Polyester Powder Coated to a standard BS or RAL Colour These racks are supplied fully welded for bolting onto concrete or setting into concrete. Nu-BF Nu-SF 58.00 Base Fixed 38.00 Submerged Fixed These racks are also available for infant/junior cycles ref. Nu SH jnr Diameter: 48.3 x 3.2mm Finish: Polyester Powder Coated to a standard BS or RAL Colour Fixing: Base Fixed (submerged fixed racks can be supplied at an extra charge) Fixing: Base Fixed (submerged fixed racks can be supplied at an extra charge) Picture shows a bank of 2 racks Picture shows Nu-BF Nu Motorcycle Locking Rail floor-mounted locking rail to secure motorcycles These rails are fully welded for bolting onto or setting into concrete Price 205.00 Capacity: 4-5 motorcycles Height: 300mm Length: 4000mm Finish: Polyester Powder Coated to a standard BS or RAL Colour Fixing: Base plates for bolting to concrete or extended legs for submerging into concrete 38 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 39

Nu Scooter Stands Outdoor Classrooms Scooter stands with pins to secure the scooter into position. These can then be locked with the users own padlock. If required, scooter racks can be incorporated into a cycle shelter see page 62. The racks can be supplied with base plates for bolting down or extended for sub-merging into concrete. These single-sided racks can also be manufactured for bolting to a wall where space is limited. Nu-SCS5 285.00 Single-Sided Nu-SCS10 328.00 Nu-SCD10 328.00 Double-Sided Nu-SCD20 398.00 IMPROVING OUTDOOR LEARNING An outdoor classroom is ideal for an evolving curriculum, providing sensory experiences leading to greater levels of creativity and understanding. The playground is full of exciting things for the children to experiment, discover and explore with. All our outdoor teaching facilities are built to combine practicality with simple design. We offer a wide range of outdoor classrooms that are available with optional seating and Lighting. It is important to us that everybody using the classroom has shelter from all weather conditions through the provision of shade and shelter. The outdoor Classrooms are suitable for Schools, National Parks, Zoos, Visitor Centres and other public areas. The classrooms are custom-made to suit any size or application. A free-of-charge UK site visit is available. There are a wide range of options for the material used for the manufacture of the classrooms. Prices on request depending upon size and spefification. Single-Sided Lengths: 850mm Double-Sided Lengths: 1675mm Sided Lengths: 925mm and 1750mm Capacity: 5, 10 scooters and 10 and 20 scooters Height: 900mm Diameter: 48.3 x 3.2mm Finish: Polyester Powder Coated to a standard BS or RAL Colour Fixing: Base Fixed or Submerged Fixed Economy Nu Scooter Stands Economy scooter stands are manufactured without pins. The scooter can be locked in position with the users own padlock. Single BNu- SCD10 315.00 BNu- SCD20 385.00 Double BNu- SCS5 203.00 BNu- SCS10 273.00 Lengths (single): 850mm, 1675mm Lengths (double): 925mm, 1750mm Capacity (single): 5, 10 scooters Capacity (double): 10, 20 scooters Height: 900mm Finish: Polyester Powder Coated to a standard BS or RAL Colour Fixing: Base Fixed or Submerged Fixed BNu- SCS10 273.00 40 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 41

Zeta Umbrellas Zeta Umbrellas are a low-cost solution to provide cover to large areas. They can provide valuable outside teaching, seating and eating areas, preventing over-exposure to the sun and let s not forget the rain! The fabric of the shade is a high quality polyester fabric, 230 grammes per square meter. It blocks out UV rays and is waterproof even in the heaviest of downpours! Opening and closing the umbrella is made easy with a removable crank or super- quick clamp handle mechanism. The clamp mechanism can be opened and closed in seconds and locked securely with the supplied padlock to protect your investment. The umbrellas are designed to withstand winds of 22-28 mph dependent on size and model. There are two methods for fixing the umbrellas. Option 1 is an Inground Sleeve System. This consists of a lower sleeve which is anchored into the concrete and lies flush with the ground. The outer sleeve is bolted to it with tamper resistant fixings. The sleeve is then secured to the umbrella via a double clamp and a lockable bolt (again, lock supplied). Option 2 is a portable stand. This is a heavy duty galvanised steel base with the same mechanisim as the inground sleeve clamp fixing attached. Concrete slabs supplied are then used to create a weight to secure the umbrella into position. Around 8-24 concrete slabs are supplied alongside each umbrella depending upon the size of the umbrella. The base has adjustable feet positioned in each corner to level the umbrella if the ground is uneven. Optional valances can be added to the umbrellas and also a guttering system can be provided. Please call the Sales Office for a full quotation. There is a wide selection of colours available. The most popular shades are listed below; however, please contact us as other colours and patterns can be obtained onto the valence at no additional cost. Professional printing is also available at an additional cost. The fabrics can be easily laundered commercially. Every umbrella is delivered in a rigid cardboard packaging tube to ensure it reaches you as we send it. The tube packaging is dependent on size of the umbrella and for larger umbrellas there will be a wooden pallet. CIRCULAR UMBRELLAS Zeta I 3 3m diameter With In ground Sleeve 525.00 Zeta P 3 3m diameter Portable Base 570.00 Zeta I 4 4m diameter With In ground Sleeve 625.00 Zeta P 4 4m diameter Portable Base 1,060.00 Zeta I 5.5 5.5m diameter With In ground Sleeve 1,565.00 SQUARE UMBRELLAS Zeta I 2.2 2.2m x 2.2m With In ground Sleeve 240.00 Zeta P 2.2 x 2.2 2.2m x 2.2m Portable Base 260.00 Zeta I 3 x 3 3m x 3m With In ground Sleeve 715.00 Zeta P 3 x 3 3m x 3m Portable Base 735.00 Zeta I 3.5 x 3.5 3.5m x 3.5m With In ground Sleeve 1,025.00 Zeta I 5 x 5 5m x 5m With In ground Sleeve 1,645.00 Zeta P 5 x 5 5m x 5m Portable Base 1,650.00 Zeta I 7 x 7 7m x 7m With In ground Sleeve 4,085.00 Zeta P 7 x 7 7m x 7m Portable Base 4,120.00 Zeta P 5.5 5.5m diameter Portable Base 1,555.00 Zeta P 3.5 x 3.5 3.5m x 3.5m Portable Base 1,050.00 Zeta I 10 10m diameter With In ground Sleeve 5,060.00 ZetaI4x4 4m x 4m With In ground Sleeve 1,220.00 Zeta P 5.5 10m diameter Portable Base 5,360.00 Zeta P 4 x 4 4m x 4m Portable Base 1,245.00 42 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 43

Theta Waiting Shelter Theta Waiting Shelter with Seating Pedestrian Shelter available with optional back, side and/or front panels to suit your site requirements. Panels available in 5mm thick PET, 8mm thick PET, Plastisol Coated Steel or toughened glass. Pedestrian/Waiting Shelter with integral seating available with optional back, side and/or front panels to suit your site requirements. Panels available in 5mm thick PET, 8mm thick PET, Plastisol Coated Steel or toughened glass. Lengths: 5060mm as standard, these can be manufactured to suit any length Overall width: 2100mm as standard, this can be manufactured to any width Roofing: Plastisol Coated Steel to a standard Colour on P7 or 5mm thick transparent PET Theta P Theta T 1,052.00 (Plastisol Roof) 1,180.00 (Transparent Roof) 5mm thick Transparent Back Panel 300.00 End Panels 175.00 per end Lengths: 5060mm as standard, these can be manufactured to suit any length Overall width: 2100mm as standard, this can be manufactured to any width Roofing: Plastisol Coated Steel to a standard Colour on P7 or 5mm thick transparent PET Theta P Theta T 1,699.50 (Plastisol Roof) 1,799.50 (Transparent Roof) 5mm thick Transparent Back Panel 300.00 End Panels 175.00 per end 44 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 45

Alpha T Waiting Shelter with Seating Beta Waiting Shelter with Seating Alpha T Waiting Shelter with integral seating is an attractive, robust shelter suitable for Schools, Railways, Bus Terminals and Sports Grounds. Without end panels it also complies with the government legislations for Smoking Shelters. Lengths: 5060mm as standard, these can be manufactured to suit any length Overall width: 2100mm as standard, this can be manufactured to any width Roofing: Plastisol Coated Steel to a standard Colour on P7 or 5mm thick transparent PET Alpha T-Seat from 2,065.00 Alpha P-Seat 1,697.00 End Panels 167.50 per end An attractive shelter ideal as a waiting shelter. The curve of the roofing ensures that rain water runs off to the rear of the shelter. Lengths: 3060mm, 4060mm and 5060mm Overall width: 2100mm Roofing: Plastisol Coated Steel to a standard colour see colour chart P7 or 5mm thick transparent PET installation instructions. If installing a concrete plinth allow and additional 500mm concrete to front and width of the shelter. A full nationwide installation service is available including ground-works. Please contact the sales office for further information. Beta P Waiting Shelters with integral seat Beta P iseat4 1,501.00 Beta P iseat5 1,614.00 Beta T Waiting Shelters with integral seat Beta T iseat4 1,768.00 Beta T iseat5 1,798.00 Picture shows a bank of 2 Beta 5m Waiting Shelters 46 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 47

Hera Buggy Shelter Domed Roof Pram Shelter The Hera Pram Store is a modern solution for the storage of prams and buggies. There are a range of options available for the shelter to suit a variety of budgets. Additional features available include a locking rail to secure the prams/buggies and lockable gates for additional security Length: 4100mm Overall width: 2100mm Roofing: 5mm thick transparent PET PRICE: 1,680.00 The Domed Roof Shelter has been specifically designed for the external storage of prams and buggies. The sophisticated shelter has a punch pad operated door lock for security and transparent sheeting giving all round visibility. Lengths: 3000mm, 4000mm, 5000mm and 6000mm Overall width: 2100mm Height to front: 2700mm Roofing: 5mm thick transparent PET Features: 1 No. Lockable door to shelter as standard. Doors available either side of shelter if required. Domed Roof Shelter Price for 5000mm length 3,240.00 Picture shows 6m Domed Roof Pram Shelter 48 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 49

Theta Buggy Shelter Eta Buggy Shelter The Theta style of shelter offers a practical and stylish solution for the external storage of prams and buggies. There are a range of options available for the shelter to suit a variety of budgets. Additional features available include a locking rail to secure the prams/buggies, lockable gates for additional security, end panels and back panels for extra weather protection. Lengths: 2560mm, 3060mm, 4060mm and 5060mm Overall width: 2100mm Roofing: Plastisol Coated Steel to a standard Colour on P7or 5mm thick transparent PET THETA BUGGY SHELTER Theta P Buggy Shelter Theta P 2560mm 920.00 Theta P 3060mm 2,197.00 Theta P 4060mm 2,347.00 Theta P 5060mm 2,531.00 Theta T Buggy Shelter Theta T 2560mm 920.00 Theta T 3060mm 2,125.00 Theta T 4060mm 2,435.00 Theta T 5060mm 2,743.00 The Eta shelter is a compact, space saving solution to store prams and buggies. The shelter is available with individual compartments which can be lockable via a chain and users padlock. Lengths: 3060mm, 4060mm and 5060mm Overall width: 1200mm Height to front: 1200mm Roofing: Plastisol Coated Steel to a standard Colour on P7 or 5mm thick transparent PET installation instructions. Alternatively, a full nationwide installation. Capacity Length Shelter Compartments Chain Gates 6 3060mm 782.00 314.00 35.00 300.00 8 4060mm 858.00 440.00 49.00 364.00 10 5060mm 936.00 567.00 63.00 429.00 PET end Panels 126.00 each Picture shows Eta Tep Shelter with Integral Locking Rail Construction: Adjustable base plates for bolting to concrete or Picture shows Theta Tbep Compound with plastisol roofing and transparent cladding OPTIONAL EXTRAS Length Plastisol PET Gates Integral Back Back Hinged Locking Panel Panel Rail 2560mm 121.00 312.00 485.00 90.00 3060mm 140.00 345.00 500.00 106.00 4060mm 178.00 410.00 530.00 140.00 5060mm 214.00 479.00 560.00 172.00 Picture shows Eta Tep Shelter with compartments and chain End Panels 164.00 per panel Picture shows 2m Theta Tbep Pram Compound with rear locking rail 50 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 51

Omicron Youth Shelter Epsilon Youth Shelter Modern eye-catching youth shelter which allows teenagers to sit facing each other and socialise. Lengths: 4000mm Roofing: Galvanised steel or 5mm thick transparent PET Fixing: Base plates for bolting to concrete or extended legs for submerging into concrete Construction: Shelters are segmented and link together to form circular shelter as shown in the photograph Picture shows modified Omicron Shelter with Plastisol Roofing Full Product Omicron P 5,999.00 Omicron T 6,200.00 Per Section Omicron P Section 1,420.00 Omicron T Section 1,530.00 Per Additional Section Omicron P-AD 1,145.00 Omicron T-AD 1,200.00 Hexagonal Youth Shelter incorporating seating designed for comfort. Can be configured from a minimum of 2 segments to a maximum of 7. Lengths: 4000mm Roofing: Plastisol Coated Steel to a standard Colour on P7 or 5mm thick transparent PET Construction: Shelters are segmented and link together to form a hexagonal shelter as shown in the diagram Full Product Epsilon P 4,995.00 Epsilon T 5,280.00 Per Section Epsilon P Section 1,320.00 Epsilon T Section 1,430.00 Per Additional Section Epsilon P-AD 695.00 Epsilon T-AD 735.00 Picture shows Omicron Youth Shelter 52 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 53

Sunburst Youth Shelter Mobility Scooter Shelters Contemporary Youth Shelter incorporating seating around the perimeter with a fixed central table. Ideal for youths to congregate, grouped with the robust design providing protection from the elements. The Mobility Scooter Shelter has been specifically designed for the external storage of mobility scooters. The attractive shelter has all round clear visibility and a lockable door. Lengths: 5600mm Lengths: 5060mm Price on application. Height to front: 2050mm Roofing: Plastisol Coated Steel to a standard BS or RAL Colour or 5mm thick transparent PET Construction: Shelters are segmented and link together to form a hexagonal shelter as shown in the diagram Full Product Sunburst P 6,650.00 Per Section Sunburst P Section 1,596.00 Per Additional Section Sunburst P-AD 1,288.00 Overall width: 3000mm Roofing: Plastisol Coated Steel to a standard Colour on P7 or 5mm thick transparent PET Features: Lockable doors to the front of the shelter as standard. Can be manufacture with sliding gates. 54 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 55

Helmet Lockers Locker shelters PLASTIC LOCKERS Cube lockers offer individual, personal security in the school or workplace. Ideal for external use, these cube lockers can be stacked together or bolted on top of other lockers for extra storage space. Available with a cam lock (supplied with 2 keys) or a hasp and staple or padlocking (padlock not supplied). Finish is Grey body available with a choice of colours for the door; blue, cream, green, grey, red or white. DIMENSIONS Height: 305mm Width: 305mm Depth: 305mm Price on application WIRE MESH LOCKERS 1 bank of 2 nests of lockers offers 12 individual compartments ideal for the storage of cycle helmets. If these lockers are ordered in conjunction with the ir12 or R12 cycle racks and shelters, the racks can be manufactured to allow the lockers to stored beneath the shelter between the racks as shown in the photograph below. DIMENSIONS Height: 1980mm Width: 305mm Depth: 710mm Price on application Shelters can be custom-made for the external storage of lockers. Below are varying designs which have been specifically designed for the customer's requirements. Cigarette Bins WALL MOUNTED OR POST MOUNTED CIGARETTE BIN FLOOR-MOUNTED STEEL OR STAINLESS STEEL CIGARETTE BINS ARE AVAILABLE Large floor-mounted CB1 Square Post Mounted Bin CB2 Price on application 56 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 57

Walkways and Entrance Canopies Paisley Entrance Canopy All walkways and canopies are designed in accordance to with BS5950 (Structural use of steelwork in buildings) by an in-house drawing team. Our designers can create a bespoke design dependent upon our customers individual site requirements. Canopies are also an excellent way to provide shade in playgrounds, ether to cover external seating or provide shade whilst children are queuing. A site surveyor can attend site, free-of-charge to measure up the area and provide a full quotation. This can include all necessary ground works and installation costs, if required. On receipt of order CAD drawings will be supplied for your approval. Once the drawings are approved this will then go into fabrication. The range of framework colours can be found on P??? of the catalogue. The roofing available for the walkways and canopies are as follows:- > PET Cladding as shown on P7 Which is supplied as standard in 5mm transparent PET, however, is available in 5mm Opal, Smoke Grey Tinted and Bronze Tinted PET. For flat roofs and shallow curves Clear and Opal PET is also available in 8mm thick > Plastisol Coated Steel as shown on P7 > Filon GRP Cladding Filon is a Glass Reinforced Polyester (GRP) available in a choice of Opaque or Translucent finish. This option offers good UV resistance and is an extremely strong cladding. It also complies with the UK Building Regulations and BS476 Fire tests. > Triple Wall Polycarbonate 16mm triple wall poly is available in clear, bronze and opal. Polycarbonate carries a 10-year warranty covering loss of light transmission and loss of strength due to weathering. The Paisley Entrance Canopy offers a contemporary yet robust design. It is manufactured with heavy duty square hollow section legs with a solid polycarbonate roof. It can be tailor-made to suit your requirements. Each Canopy/Walkway is custom-made to suit any area or application. A free-of-charge UK site visit is available. The roofing sheets are 16mm triple wall polycarbonate. Guttering can be incorporated. Picture shows Stirling Entrance Canopy 58 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 59

Stirling Entrance Canopy Dundee Walkway The Stirling Entrance Canopy offers a contemporary design at a low cost, The monopitch canopy is manufactured with heavy duty square or round hollow section legs with a solid polycarbonate roof. It can be tailor-made to suit your requirements. A free-of-charge UK site visit is available. Prices upon request depending upon size The Dundee walkway can either be wall and floormounted or free-standing. It has an attractive curved roof and can be manufactured to suit any location. The walkway can be manufactured with heavy duty square or round hollow section legs. A free-of-charge UK site visit is available. The roofing sheets are 16mm triple wall polycarbonate. Guttering can be incorporated. Safety pads can be added to the legs of the shelter. 60 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 61

Dumfries Lattice Walkway Theta Bin Compound The Dumfries walkway is an ideal shelter to cover larger areas with the lattice detailing doubling not only as an attractive feature but also as a strengthener. Shelter can be manufacture to incorporate wheelie bins. Please contact our Sales Department with your requirements. Each Canopy/Walkway is custom-made to suit any area or application. A free-of-charge UK site visit is available. The roofing sheets are 16mm triple wall polycarbonate. Guttering can be incorporated. Safety pads can be added to the legs of the shelter. Theta Shelter Incorporating Integral Scooter Rack Scooter racks can be incorporated into any bike shelter. The photograph shows the Theta Design incorporating a cycle rack and a scooter rack. 62 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 63

Olympic Smoking Shelter Theta Smoking Shelter The Olympic Smoking Shelter is an attractive curved roof shelter complying with the current UK Government Smoking Shelter Regulations, Office of Tobacco Control Regulations Ireland and The Smoking, Health and Social Care (Scotland) - 50% of the wall area open for ventilation. A perch seat can be added to the rear of the shelter, if required. The Theta Smoking Shelter comp0lies with the current UK Government Smoking Shelter Regulations, Office of Tabacco Control Regulations Ireland and The Smoking, Health and Social Care (Scotland) - 50% of the wall area open for ventilation. Lengths: 3060mm, 4060mm and 5060mm Lengths: 3000mm, 4000mm Price Overall width: 2100mm Price Overall width: 2000mm Roofing: 5mm thick transparent PET Cladding: 50% clad with 5mm thick transparent PET Olympic 3m 1,150.00 Olympic 4m 1,290.00 Roofing: 5mm thick transparent PET (plastisol coated steel upon request) Theta TSS3 1,748.00 Theta TSS4 1,882.00 Theta TSS5 2,044.00 64 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 65

Boot and Shoe Cleaners Boot and Shoe Cleaners Perseus Boot and Shoe Cleaner Theseus Boot and Shoe Cleaner Fully Welded Boot and Shoe Cleaner with steel handle frame. Fitted with a single row of heavy duty PVC brushes. Framework painted in a durable, corrosion resistant black hammerite paint. Brush tray at floor level. Replacement brush sets are available. Lengths: 915mm, 1220mm, 1830mm and 2440mm Overall width: 85mm Height: 1000mm Finish: Black Hammerite Painted Fixing: Either base plates for bolting to concrete or extended legs for submerging into grass/concrete Fully Welded Boot and Shoe Cleaner with steel handle frame. Fitted with a single row of heavy duty PVC brushes. Framework painted in a durable, corrosion resistant black hammerite paint. Brush tray 120mm above floor level. Replacement brush sets are available. Lengths: 915mm, 1220mm, 1830mm and 2440mm Overall width: 85mm Height: 1000mm Finish: Black Hammerite Painted Fixing: Extended legs for submerging into grass/concrete Hercules Boot and Shoe Cleaner Fully Welded Boot and Shoe Cleaner with steel handle frame. Fitted with a double row of heavy duty PVC brushes. Framework painted in a durable, corrosion resistant black hammerite paint. Brush tray set at floor level. Replacement brush sets are available. PRICE: Perseus915 105.00 Perseus1220 130.00 Perseus1830 155.00 Perseus2440 180.00 PRICE: Theseus 915 105.00 Theseus 1220 130.00 Theseus 1830 155.00 Theseus 2440 180.00 Replacement Brush Sets for the Perseus or the Theseus 915R 35.00 1220R 60.00 1830R 85.00 2440R 110.00 Lengths: 915mm, 1220mm, 1830mm and 2440mm Overall width: 168mm Height: 1000mm Finish: Black Hammerite Painted Fixing: Extended legs for submerging into grass/concrete PRICE: Hercules 915 155.00 Hercules 1220 175.00 Hercules 1830 195.00 Hercules 2440 200.00 66 Tel: 01704 546522 Fax: 01704 517437 Tel: 01704 546522 Fax: 01704 517437 67