VERTICAL BLINDS AND CONSERVATORY AWNINGS safe timeless beautiful markilux 780 / 880 Remarkably compact yet strong conservatory awnings for small glass areas both on the interior and the exterior rated to wind resistance class 3 (corresponds to Beaufort 6) www.markilux.com markilux
markilux 780 / 880 VERTICAL BLINDS AND CONSERVATORY AWNINGS side view markilux 780 side view markilux 880 side view with manual operation, markilux 780 (illustration without winding handle) side view with manual operation, markilux 880 (illustration without winding handle) gap cover profile for the guide track (optional) and decoration cap for track brackets (optional) cover support tube for larger units motor drive (optional) secreted in the roller tube markilux 880, brush seal protects the retracted cover against soiling Design Features Technical Specification Optional Accessories compact cassette profile made of extruded aluminium, the square cassette of the markilux 780 is only 95 mm in height the panel joints of the awning cover are ultrasonically bonded for an improved appearance without unsightly stitching is suitable for use as both exterior and interior shading awning completely pre-assembled and tested in the factory brackets with patented clip-on mechanism for simple, problem free installation hard-wired motor operation (optionally with automatic weather controls) for straightforward and easy operation radio-controlled motor with remote control for comfortable operation, markilux remote control with ergonomic design when retracted the cover is protected from the weather by the cassette, which encloses it completely for long-lasting attractiveness the awning has been powder coated in the case of manual operation it is supplied with a markilux stainless steel winding handle quality to get to grips with the compact, rounded profiles make it discreet and unobtrusive special vario-belts provide optimum cover tension when the awning is completely extended the guide tracks can overhang the outermost bracket by up to 80 cm, giving even more protection from the sun in the case of the round cassette: extremely sturdy, stainless steel side cheek sheathed in plastic and powder coated an easily installed, radio control light and wind sensor guarantees comfort and a degree of safety even in your absence to simplify fixture, a broad selection of brackets is available awning available in non-standard RAL colours 1 Special features www.markilux.com
VERTICAL BLINDS AND CONSERVATORY AWNINGS markilux 780 / 880 Dimensions and configuration options overall width motor operation overall width manual operation recommended min. bracket height when fitting on top of a structure: 80 mm 1) from an extension of 301 cm, 3 brackets per track 2) additional support for the cover support tube(s) 3) 1 cover support tube 4) 2 cover support tubes In the case of fixture types 10 and no cover support tubes when fitted underneath a structure Operation / Drive unit standard optional manual operation hard-wired motor io radio-controlled motor radio-controlled motor (433 z) A 75 100 1 165 5 245 285 3 350 2) 375 2) 400 2) A 62 76 101 126 166 6 246 286 326 351 376 min. 75 100 1 165 5 245 285 3 350 375 400 +5 433 0 0 3) 3) 3) 0 3) 4) 4) 300 3) 3) 3) 3) 4) 4) 350 1) 3) 3) 3) 3) 3) 3) 3) 4) 4) 400 1) 3) 3) 3) 3) 3) 3) 4) 4) +8 recommended min. bracket height when fitting on top of a structure: 100 mm Covers fabric range no. 62 76 dimensions in cm recommended min. bracket height when fitting on top of a structure: 0 mm standard optional sunsilk snc 324 xx / 328 xx / 9 xx 5) sunvas snc 310 xx / 311 xx 313 xx 3 xx 5) sunsilk perla FR 374 xx 6) transolair 338 xx 7) perfotex 332 xx 6) vuscreen ALU 317 xx 8) vuscreen FR 318 xx 8) sunvas perla 370 xx 6) 5) in the case of the markilux 780 up to a maximum extension of 300 cm; from an extension of 301 cm only sunvas oversized material is possible; from a certain size the cover will be made with horizontal panels 6) in the case of the markilux 780 up to a maximum extension of 0 cm 7) depending on the width and extension with bonded horizontal seam(s) 8) up to a maximum extension of 0 cm 01 02 03 04 05 06 07 08 09 10 11 12 13 16 17 18 19 21 hard-wired motor manual / gearbox operation 433 radio-controlled motor (433 z) A fixture width / order width A min. minimum fixture width extension www.markilux.com Dimensions and configuration options 161
markilux 780 / 880 VERTICAL BLINDS AND CONSERVATORY AWNINGS Frame colours Additional information standard optional The width of the awning cover is always less than that of the awning. traffic white RAL 9016 Definition of fixture/order width: the width noted on the metallic aluminium RAL 9006 order should be the fixture width of the unit i.e. the distance between the two fixture points on the conservatory. grey brown, similar to RAL 8019 The overall width is greater than the fixture width (see matrix). The tolerance in the width is + 0 mm / 10 mm. non-standard powder-coated finish Colours similar to those in the RAL chart. Colours may differ slightly from those depicted in both hue and finish. Dimensions and tolerances housing tolerances awning cover width awning fixture width width + 5 / 10 mm 100 mm drop 780 880 awning cover length nominal awning extension 135 mm 5 mm iscellaneous standard light and wind sensor optional Definition of extension: the nominal extension is measured with the awning extended from the back of the cassette to the leading edge of the front profile (the guide tracks will extend mm past this point). For the tolerances in the extension is + / mm. N.B! If the motor is used continuously it will stop automatically after 3 to 4 minutes to prevent overheating. Definition of operating side: the operating side is always given as if seen from the outside looking towards the cassette (right or left). Extension with a hard-wired motor takes approx. 12 seconds per metre, with a radio-controlled motor approx. 10 seconds per metre, in the case of manual operation 18 winding handle rotations per metre. This model is only available as a single unit. gap cover profiles block the gap between cover and tracks Depending on the size of the blind, deflection may be in evidence in individual profiles and sections of profile which is completely unavoidable. This affects neither the functionality nor the durability of the awning. Fixtures, fittings and accessories markilux 780 / 880 80 6,50 24 fixture type 10, flat track bracket fixture type track bracket with adjustable head fixture type 21 track bracket with adjustable head 33 80 mm 100 mm 78548. 78451. 78538.. insert RAL colour code no. 162 Additional information / Fixtures, fittings and accessories www.markilux.com
VERTICAL BLINDS AND CONSERVATORY AWNINGS markilux 780 / 880 Fixtures, fittings and accessories markilux 780 / 880 fixture type 22 track bracket with adjustable head 0 mm fixture type 30 flat track bracket for track fixture with adjustable head track bracket with adjustable head 100 500 mm 01 02 03 04 78539. 78546. 78540. 05 universal track bracket 80 mm universal track bracket 100 mm universal track bracket 0 500 mm 06 07 78542. double flat track bracket 2 single units 78543. double track bracket with adjustable head 80 mm 2 single units 78545. double track bracket with adjustable head 100 mm 2 single units 08 09 10 11 78671. 78654. 78658. 12 double track bracket with adjustable head 0 mm double track bracket with adjustable head 0 500 mm footprint dimensions of adjustable track bracket 13 78683. 78719. 2 single units fixture type additional bracket bearing/motor side 50 50 80 mm (fixture between beams, walls etc.) please order additional accessories 787211! 78685. 787. 2 single units fixture type additional angled bracket gearbox side 80 50 80 mm (fixture between beams, walls etc.) please order additional accessories 787211! 787211 fixture type accessories for two angled brackets 78719. or 787. 16 17 18 19 78679. support for cover support tube required when the fixture width is 31 mm 763. decorative cap for track bracket to be used with: 78081., 78086., 78094., 78247., 78451., 78538., 78543., 78454., 78663. 764. decorative cap for track bracket to be used with: 78082., 78087., 78095., 78105., 78107., 78108., 781., 78539., 78540., 78545., 78665., 78664., 78685. 21 gap cover profile bracket for light/wind/rain sensor adapter plate 110 mm 2 78999. 78547. 788.. insert RAL colour code no. www.markilux.com Fixtures, fittings and accessories 163
markilux 780 / 880 VERTICAL BLINDS AND CONSERVATORY AWNINGS Fixture combinations / Fixture types All brackets incur a surcharge 78548. Fixture type 10 1) Fixture type 1) 78719. 787. 78548. 78451. Fixture type 2) 80 78538. Fixture type 21 2) 100 78539. Fixture type 22 2) 0 78546. Fixture type 30 2) 1) from an extension of 3001 mm, 3 brackets per track without cover support tube cover sag during extension and retraction may reach approx. 350 mm without gap cover profile for cassette / guide track (to prevent water ingress when retracted) 2) from an extension of 3001 mm, 3 brackets per track Individual bracket combinations see Fixtures, fittings and accessories. Please note the minimum quantity required for the width and unit height you intend to order! 164 Fixture combinations / Fixture types www.markilux.com
VERTICAL BLINDS AND CONSERVATORY AWNINGS markilux 780 / 880 Gap cover profiles block the gap between cover and tracks (optional) Example in the case of the square cassette 01 02 03 04 05 06 07 08 09 10 11 12 78999. 13 Cross section of gap cover profile 78999. 16 17 18 19 21 78999. gap cover profile www.markilux.com Gap cover profiles block the gap between cover and tracks 165
markilux 780 / 880 VERTICAL BLINDS AND CONSERVATORY AWNINGS Dimension overview fixture type 10 markilux 780 95 min. 170 max. 300 41 102 min. 100 max. 800 40 78548. A BA [] [ ] A A BA A [ ] 78548. overall awning width awning fixture width fixture width order width nominal extension order extension width between fixture points manual operation dimensions in the case of manual operation up to an extension of 3000 mm, 2 per track, from an extension of 3001 mm, 3 per track 166 Dimension overview fixture type 10 www.markilux.com
VERTICAL BLINDS AND CONSERVATORY AWNINGS markilux 780 / 880 Dimension overview fixture type markilux 780 01 02 min.170 max.300 95 41 03 04 05 06 102 07 min.100 08 LS/ O max.800 50 80 A 09 10 11 78548. LS/ O 78719. 50 50 5 50 8 8 A IW A IW 8 8 80 5 5 50 50 A 787. 12 13 16 17 18 19 21 A LS O A IW overall awning width awning fixture width fixture width order width nominal extension order extension bearing side motor operation manual operation interior conservatory dimension 78548. up to an extension of 3000 mm, 2 per track, from an extension of 3001 mm, 3 per track www.markilux.com Dimension overview fixture type 167
markilux 780 / 880 VERTICAL BLINDS AND CONSERVATORY AWNINGS Dimension overview fixture types, 21 and 22 markilux 780 min. 170 max. 300 95 G min. 100 max. 800 A A A O 40 40 T 8 BA P G AR 130 80 78451. 21 0 100 78538. 22 190 0 78539. A G A O T BA P AR 78451. 78538. 78539. awning fixture width fixture width order width nominal extension order extension overall height fixture bracket height manual operation motor operation bracket width between fixture points fixture type fixture bracket part no. up to an extension of 3000 mm, 2 per track, from an extension of 3001 mm, 3 per track up to an extension of 3000 mm, 2 per track, from an extension of 3001 mm, 3 per track up to an extension of 3000 mm, 2 per track, from an extension of 3001 mm, 3 per track 168 Dimension overview fixture types, 21 and 22 www.markilux.com
VERTICAL BLINDS AND CONSERVATORY AWNINGS markilux 780 / 880 Dimension overview markilux 780 anual operation A max. 4000 mm 01 02 03 04 AS 05 0 95 06 07 08 7 37 09 10 11 130 12 13 A 16 17 78 22 57 0 22 37 95 18 19 21 A AS overall awning width awning fixture width fixture width order width nominal extension order extension single unit operation side www.markilux.com Dimension overview markilux 780 169
markilux 780 / 880 VERTICAL BLINDS AND CONSERVATORY AWNINGS Dimension overview markilux 780 otor operation A max. 4000 mm AS 130 0 95 7 7 70 A AS overall awning width awning fixture width fixture width order width nominal extension order extension single unit operation side 170 Dimension overview markilux 780 www.markilux.com
VERTICAL BLINDS AND CONSERVATORY AWNINGS markilux 780 / 880 Dimension overview markilux 780 Two single units 01 [] A max. 4000 mm A max. 4000 mm [] 02 03 04 0 95 37 [7] 37 [7] 95 0 05 06 07 08 130 130 09 10 Cable exit point in the case of motor-driven units 11 12 13 47,5 P: 10, 16 17 18 19 21 47,5 P:, 21, 22, 30 A [ ] P overall awning width awning fixture width fixture width order width nominal extension order extension single unit dimensions in the case of motor operation fixture type www.markilux.com Dimension overview markilux 780 171
markilux 780 / 880 VERTICAL BLINDS AND CONSERVATORY AWNINGS Dimension overview fixture type 10 markilux 880 min. 170 max. 300 1 41 1 min. 100 max. 800 78548. 40 A [] BA [ ] A A BA A [ ] 78548. overall awning width awning fixture width fixture width order width nominal extension order extension width between fixture points manual operation dimensions in the case of manual operation up to an extension of 3000 mm, 2 per track, from an extension of 3001 mm, 3 per track 172 Dimension overview fixture type 10 www.markilux.com
VERTICAL BLINDS AND CONSERVATORY AWNINGS markilux 780 / 880 Dimension overview fixture type markilux 880 LS/ O 78548. LS/ O 78719. 1 min. 170 max. 300 50 50 1 50 5 50 8 8 A IW A 5 IW min. 100 max. 800 8 8 A LS O A IW overall awning width awning fixture width fixture width order width nominal extension order extension bearing side motor operation manual operation interior conservatory dimension 78548. 78719. 787. up to an extension of 3000 mm, 2 per track, from an extension of 3001 mm, 3 per track angled bracket for bearing / motor side, fixture method angled bracket for gearbox side, fixture method 80 80 5 41 50 50 A A 787. 01 02 03 04 05 06 07 08 09 10 11 12 13 16 17 18 19 21 www.markilux.com Dimension overview fixture type 173
markilux 780 / 880 VERTICAL BLINDS AND CONSERVATORY AWNINGS Dimension overview fixture types, 21 and 22 markilux 880 min. 170 max. 300 1 G min. 100 max. 800 A A A O T 40 8 BA 40 P G AR 130 80 78451. 21 0 100 78538. 22 190 0 78539. A G A O T BA P AR 78451. 78538. 78539. awning fixture width fixture width order width nominal extension order extension overall height fixture bracket height manual operation motor operation bracket width between fixture points fixture type fixture bracket part no. up to an extension of 3000 mm, 2 per track, from an extension of 3001 mm, 3 per track up to an extension of 3000 mm, 2 per track, from an extension of 3001 mm, 3 per track up to an extension of 3000 mm, 2 per track, from an extension of 3001 mm, 3 per track 174 Dimension overview fixture types, 21 and 22 www.markilux.com
VERTICAL BLINDS AND CONSERVATORY AWNINGS markilux 780 / 880 Dimension overview markilux 880 anual operation 01 02 03 A max. 4000 mm AS 04 05 1 06 07 7 37 135 08 09 10 11 12 13 A 16 1 17 18 45 40 22 37 22 19 21 A AS overall awning width awning fixture width fixture width order width nominal extension order extension single unit operation side www.markilux.com Dimension overview markilux 880 175
markilux 780 / 880 VERTICAL BLINDS AND CONSERVATORY AWNINGS Dimension overview markilux 880 otor operation A max. 4000 mm AS 1 7 7 135 75 overall awning width A awning fixture width fixture width order width nominal extension order extension single unit AS operation side 176 Dimension overview markilux 880 www.markilux.com
VERTICAL BLINDS AND CONSERVATORY AWNINGS markilux 780 / 880 Dimension overview markilux 880 Two single units 01 02 [] A max. 4000 mm A max. 4000 mm [] 03 04 05 06 1 37 [7] 37 [7] 1 07 135 135 08 09 10 11 12 13 16 17 18 19 21 A [ ] overall awning width awning fixture width fixture width order width nominal extension order extension single unit dimensions in the case of motor operation www.markilux.com Dimension overview markilux 880 177
markilux 780 / 880 VERTICAL BLINDS AND CONSERVATORY AWNINGS 178 www.markilux.com