Cleaners B-17 DESCRIPTIONS OF THESE ITEMS ARE ON THE NEXT 4 PAGES 99A MODEL G
Cleaners B-18 Edited 2-7-06 1 3288-001 HANDLE ASSY. (Blue & White, Bracket included) - Aquabot, AB+RC, AB Turbo, AMAX Jr A10000B 1 3288-115 HANDLE ASSY. (Blue & White, Bracket included) - Ultramax A10200 1 3288-002 HANDLE ASSY. (Blue & White, Bracket included) - Aquamax, Aquabot Ultra A10201 1 3288-104 HANDLE ASSY. (Blue & White, Bracket included) - AB Ultra, AMAX Biturbo, UMAX Jr A10203 1 3289-013 HANDLE ASSY. (Green & Black, Bracket not included) - Merlin A10603 2 3289-004 BRACKET FOR HANDLE (Black) - Merlin 5088BK 2 OBSOLETE OBSOLETE BRACKET FOR HANDLE (Blue) - all units except Merlin S1100B 4 3289-017 CLEVIS PIN (Flat Head, hole in end) - Secure Handle inside Side Plate of Merlin 11002 4 3288-076 CLEVIS PIN (Round Head, hole in end) - Secure Handle inside most Handle Brackets 11003 6 3288-154 WASHER (St.Steel) - Use to secure Handle Assy. inside most Handle Brackets 11004 7 3288-155 COTTER RING (Aluminum, 3/16 ) - Secure Handle Pin inside Side Plate of all units 11005 8 3288-116 SCREW (10-32, 7/8, Phil Pan Head) - For securing the Handle Bracket to the Body Assembly 1105 9 3288-021 SCREW (#8, 11/16, Phil Pan Head) - To secure Handle Bracket to top of Outer Shell in Ultramax units 2701 10 3288-156 SCREW (Pan head) - For securing all White Drive Motors, or Black Motors with Spacer Bracket 2500 12 3288-012 P-CLIP (1/4, Plastic) - For securing the non-foam-insulated part of a 2-wire cable to the Body 2100 12 3288-109 P-CLIP (5/16, Plastic) - For securing the non-foam-insulated part of a 4-wire cable to the Body 2101 12 3288-157 P-CLIP (7/16, Plastic) - For securing the foam-insulated part of a 2-wire cable to the Handle Assy. 2102 12 3288-158 P-CLIP (11/16, Plastic) - For securing the foam-insulated part of a 9-wire cable to the Handle 2103 12 3288-159 P-CLIP (3/8, Plastic) - For securing the non-foam-insulated part of a 4-wire cable to the Body 2104 12 replace nla P-CLIP (1/2, Plastic) rep w/ 3288-161 2105 12 3288-161 P-CLIP (5/8, Plastic) - For securing the foam-insulated part of a 4-wire cable to the Handle Assy. 2106 12 3288-121 P-CLIP (5/8, St.Steel) - For securing the foam-insulated part of a 4-wire cable to the Handle Assy. 2110 12 3288-162 P-CLIP (5/8, Coated Steel) - For securing the insulated part of a 4,7,9-wire cable to the Handle 2111 12 3288-163 P-CLIP (11/16, St.Steel) - For securing the foam-insulated part of a 9-wire cable to the Handle 2112 12 3288-164 P-CLIP (9/16, Plastic) - For securing the Heat Shrink part of the 2-wire cable to the Handle Assy. 8316 13 3288-127 SCREWS (#8, 11/16, Phil Pan-Flat Head) - To secure a P-Clip whenever the hole is deep 2700 14 3288-111 SCREWS (#6, 7/16, Phil Pan-Flat Head) - To secure a P-Clip when the hole is shallow 2260 15 3288-006 PLUG (3-Pin, Female, 2-Wire) - Aquabot, AB Turbo, AMAX Jr HT/+, AMAX, Merlin 1601 15 3288-009 PLUG (4-Pin, Female, 4-Wire) - AB Turbo Solo, AB Turbo RC, AMAX Jr+RC 1635 15 3288-010 PLUG (7-Pin, Female, 7-Wire) - Aquamax Biturbo RC 1636 15 3288-120 PLUG (9-Pin, Female, 9-Wire) - Ultramax Jr, Ultramax 1638 15 3288-165 PLUG (7-Pin, Male, 7-Wire) - Aquabot Plus RC, Aquabot Ultra 1640E 16 3288-166 EZ-SWIVEL (Blue, Plastic, Small) - For detangling the 2-wire Cable Assembly S7930 16 3288-167 EZ-SWIVEL (Blue, Plastic, Large) - For detangling the 4 or 7-wire Cable Assembly S7935 17 3288-168 CABLE ASSY. (2-Wire, 100 Foot, Floating) - Aquamax Junior Plus A16101 17 3288-169 CABLE ASSY. (7-Wire, 120 Foot, Floating) - Aquamax Biturbo RC A16119 17 3288-170 CABLE ASSY. (7-Wire, 75 Foot, Floating) - Aquabot Plus RC, Aquabot Ultra A16120 17 3288-106 CABLE ASSY. (4-Wire, 120 Foot, Floating) - Aquamax Biturbo A16122 17 3288-118 CABLE ASSY. (9-Wire, 120 Foot, Floating) - Ultramax Junior, Ultramax A16125 17 3288-119 CABLE ASSY. (9-Wire, 150 Foot, Floating) - Ultramax Junior, Ultramax A16159 17 3288-171 CABLE ASSY. (4-Wire, 75 Foot, Floating) - Aquabot Turbo Solo, Aquabot Turbo RC A16475 17 3288-172 CABLE ASSY. (2-Wire, 51 Foot, Floating) - Aquabot A1652 17 3288-173 CABLE ASSY. (2-Wire, 60 Foot, Floating) - AB Turbo, AMAX Jr HT, Merlin A1661 17 3288-174 CABLE ASSY. (2-Wire, 75 Foot, Floating) - Aquabot Plus, Aquamax Jr HT A1675F 17 3288-105 CABLE ASSY. (2-Wire, 120 Foot, Floating) - Aquamax A17121 18 3288-175 FLOAT BALL (Blue & White, Large) - For Large Cable with Rope Assembly 1602 18 3288-007 FLOAT BALL (Light Blue, Small) - For OLD Cable Assembly with Float Balls 1603 19 3288-008 KEY FLOAT (Lock for Float Ball) - For OLD Cable Assembly with Float Balls 1604 25 3288-015 OUTLET TOP (Top and Bottom) - For all units except those with an Outer Shell, Merlin, Bravo 2230B 25 3288-124 OUTLET TOP (Top, Bottom, & Cap) - For all units with an Outer Shell like the Ultramax 2240B 25 3289-011 OUTLET TOP (Black, Flat Circle) - Merlin 5093BK 26 3288-013 BODY ASSY. (White, with all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - Aquabot A22000 26 3288-176 BODY ASSY. (White, with all Holes, Lock Tabs, Outlet Bottom, Inserts) - Ultramax (only 1/2 of unit) A22000NOHOLE 26 3288-177 BODY ASSY. (White, with all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - AB Turbo RC/Solo A22000-W2H 26 3288-178 BODY ASSY. (White, with all Holes, Lock Tabs, Outlet Bottom, Inserts) - ABOT+RC A22000XH 26 3288-014 BODY ASSY. (White, with all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - Aquamax A22201 26 3288-179 BODY ASSY. (White, w/ all Holes, Lock Tabs, Pin, Outlet Bottom, Inserts) - AMAX Biturbo A22201MBT 26 3288-180 BODY ASSY. (White, with all Holes, Lock Tabs, Outlet Bottom, Inserts) - Ultramax Jr A22201MJR 26 3288-181 BODY ASSY. (White, w/ all Holes, Lock Tabs, Outlet Bottom, Inserts) - Aquabot Ultra A22201UB 26 3288-182 BODY ASSY. (Yellow, with all Holes, Lock Tabs, Pin, Inserts) - Merlin A5091
Cleaners B-19 27 3288-183 SCREWS (18-8, 6/32 x 5/8, Phil Pan Head) - To secure the Outlet Top on the Merlin 5061 29 3288-011 ANTI-ROLL BRACKETS (Plastic) - Install raised-up, on top of Body Assembly to prevent rolling 2300 30 3288-129 LOCK-NUTS (Hex, Nylon insert) - For securing the Screws of the Anti-Roll Brackets 3402 31 3288-184 SCREW (M-5, Phil Bev Head) - To secure the Anti-Roll Brackets to the Body Assembly 2261 36 3288-185 LOCK-TABS (Blue, Plastic) - For All Body Assemblies, used to hold Bottom Lid to base (set of 2) 9204BL 37 3288-022 WIRE RETAINER CLIP (OLD, Pre-shaped Wire) - Use w/ Locking Plate to secure Bottom Lid 2800 38 3288-186 SCREWS (18-8, 8/32 x 1/2, Phil Bev Head) - To secure the Lock-Tabs to the Body Assembly 2303 39 3288-187 LOCK-NUT (Nylon Insert, Hex) - To secure the Screws of the Lock-Tabs to the Body Assembly 7133 42 3288-188 DRAIN VALVE FLAPS (OLD, Rubber) - For use to cover the large holes at corners of old units. 2305 45 3288-032 SIDE PLATE (Blue, no holes) - Aquabot, Aquabot Turbo, Aquamax Jr HT, Aquamax Jr + 3400B 45 3288-189 SIDE PLATE (Black, no holes) - Aquabot, Aquabot Turbo, Aquamax Jr HT, Aquamax Jr + 3400BK 45 REPLACE NLA SIDE PLATE (White, no holes) REP W/ 3288-032 3400W 45 3289-008 SIDE PLATE (Black) - Merlin 5095BK 45 3288-146 SIDE PLATE (Blue, 4 holes for Bolts) - Aquamax, Aquamax Biturbo, AMAX Jr S3400B-4H 45 3288-128 SIDE PLATE (Blue, 6 holes, 4 for Bolts, 2 for DM access) - AB+RC, AB Ultra, UMAX units S3400B-6H 45 3288-151 SIDE PLATE (Blue, 8 holes, 4 for Bolts, 4 for Piston Clamps) - Aquabot Turbo Solo / RC S3400B-8H 45 3288-191 SIDE PLATE (Black, 6 holes, 4 for Bolts, 2 for DMaccess) - AB+RC, AB Ultra, UMAX units S3400BK-6H 45 3288-144 SIDE PLATE (shallow, 1 large hole for cables, 4 small holes for Bolts) - Ultramax S3400W 45 3288-033 SIDE PLATE (White, 4 holes for Bolts) - Aquamax, Aquamax Biturbo S3400W-4H 46 3289-009 C RING GUARD (Green) - For Merlin Side Plate 5096G 51 3288-017 BUSHING (White, Plastic) - For use on all Side plates to lock-in Wheel Tube Assemblies 2600 51 3288-192 BUSHING (OLD, small sleeve) - For the end of older Pulley Assemblies like A3608 2604 52 3288-193 BUSHING (White, Plastic) - For use on some Side plates to lock-in the Body s Pin Support 2610 54 3288-038 SMALL ROLLER (White, Plastic) - Supports the Drive Track, install on lower legs of Side Plate 3500 55 3288-042 LARGE ROLLER (White, Plastic) - Supports the Drive Track, installs on Body s Pin Support 3700 56 3288-034 STEPPED SLEEVE ROLLER (White) - Supports Drive Belt, installs on the upper Side Plate leg 3506 57 3288-031 DRIVE BELTS (Tan) 3302 58 3288-041 PULLEY ASSEMBLY (Short) - For most Residential units with White Drive Motors A3600 58 3289-007 PULLEY ASSEMBLY (Medium) - For most Commercial Units with Black Drive Motors A3605 58 3288-102 PULLEY ASSEMBLY (Long, OLD) *** See Drive Motor Spacer Bracket A3608 60 3288-087 PUMP MOTOR - Aquabot A6001A 60 3288-088 PUMP MOTOR - Aquabot Turbo, Aquamax Jr HT A6001T 60 3288-140 PUMP MOTOR - Aquabot Plus RC, AB Ultra, AMAX Jr+, Aquamax, AMAX BT, Ultramax A6010U 60 3289-20 PUMP MOTOR - Merlin A6073 61 3288-045 PROPELLER (Black) - For Pump Motor, tap onto half-circle shaped motor shaft. 4400 62 3288-016 SCREW (8-18, 3/4, Phil No-head) - For securing Pump Motors to the Body Outlet Top 2251 80 3288-081 DRIVE MOTOR (White, Terminal Basin) - Aquabot A4510A 80 3288-082 DRIVE MOTOR (White, Terminal Basin) - Aquabot Turbo, Aquamax Junior HT A4510T 80 3288-194 DRIVE MOTOR (GTSP, White, Terminal Basin) - ABOT Turbo) ** only when specified by AP A4515 80 3288-086 DRIVE MOTOR (White, Terminal Basin) - Aquamax Junior Plus A4518 80 3288-099 DRIVE MOTOR (Black, bare wire leads) - AMAX, AMAX Biturbo, AMAX RC, AMAX BT RC A8517MBT 80 3288-195 DRIVE MOTOR (Black, BB Liquid Air Sensor, bare wire leads) - All AMAX units with A.S. A8520 80 3288-139 DRIVE MOTOR (Master/Black, Standard) - Ultramax Junior, Ultramax A8523SL 80 3288-196 DRIVE MOTOR (Master/Black, BB Liquid Air Sensor) - Ultramax Jr, Ultramax A8524BBSL 80 3288-197 DRIVE MOTOR (Master/Black) - Aquabot Plus RC, Aquabot Ultra A8526SL 80 3289-010 DRIVE MOTOR (Black, bare wire leads) - Merlin A8571 81 3288-046 SPIRAL PIN (3/4, solid Stainless Steel) - For the shaft end of every Drive Motor, use Lock-Tite 4613 82 3288-047 BRASS NUTS (Hex, small) - For attaching the Loop Connectors of wires to Brass Terminals 4618 83 3288-049 LOOP CONNECTOR (Aluminum, crimp) - For attaching Motor wires to Brass Terminals 4619 84 3288-050 TERMINAL COVER (Plastic, Rectangle) - For sealing up the Basin in all White Drive Motors 5000 85 3288-198 SCREW (5/8 ) - For sealing the Terminal Cover onto the Basin of all White Drive Motors 4501 90 3289-016 WHEEL TUBE ASSY (Aquabot, Merlin) ** does not use retaining rings A38000 90 3288-044 WHEEL TUBE ASSY (Aquamax, Aquamax Biturbo) A38001 90 3288-199 WHEEL TUBE ASSY (Aquamax, Aquamax Biturbo) - Model G A38001MG 90 3288-131 WHEEL TUBE ASSY (Ultramax) A38200 90 3288-200 WHEEL TUBE ASSY (Ultramax) - Model G A38200MG 90 3288-201 WHEEL TUBE ASSY (Aquabot Ultra, Ultramax Junior) A38201 90 3288-202 WHEEL TUBE ASSY (Aquabot Ultra, Ultramax Junior) - Model G A38201MG 90 3288-203 WHEEL TUBE ASSY (Aquabot Plus RC) A38203
Cleaners B-20 Edited 2-7-06 90 3288-204 WHEEL TUBE ASSY (Aquabot Plus RC) - Model G A38203MG 90 3288-043 WHEEL TUBE ASSY (Aquabot, Aquabot Turbo, Aquamax Jr HT, Aquamax Jr Plus) A38205 90 3288-205 WHEEL TUBE ASSY (Aquabot, Aquabot Turbo, Aquamax Jr HT, AMAX Jr +) - Model G A38205MG 91 3288-077 RETAINING RING (E-Clip) - New Style 11058 91 REPLACE NLA RETAINING RING (C-Clip) - Old Style Rep W/3288-077 11059 92 3288-130 WASHER (Nylon, Flat) - For each end of the Wheel Tube 3603 97 3288-206 BRUSHES (Light Blue PVA Foam, long) - Aquamax, Aquamax Biturbo 3008 97 3288-207 BRUSHES (Light Blue PVA Foam) - Aquabot, AB Turbo, AMAX Jr, Merlin, Ultramax 3009 97 3288-023 BRUSHES (Blue Molded Rubber) - ABOT, AB Turbo, AMAX Jr, Merlin, Ultramax 3002B 97 3288-208 BRUSHES (Blue Molded Rubber, long, cut in half) - Aquabot Ultra, Ultramax Junior 3002B4 97 3288-209 BRUSHES (Blue Molded Rubber, cut in half) - Aquabot Plus RC 3002B4S 97 3288-024 BRUSHES (Blue Molded Rubber, long) - Aquamax, Aquamax Biturbo 3002BM 97 3288-210 BRUSHES (Black Molded Rubber) - ABOT, AB Turbo, AMAX Jr, Merlin Ultramax 3003B 97 3288-211 BRUSHES (Black Molded Rubber, cut in half) - Aquabot Plus RC 3003BL4 97 3288-212 BRUSHES (Black Molded Rubber, long) - Aquamax, Aquamax Biturbo 3003M 97 3288-213 BRUSHES (Light Blue PVA Foam) - Aquabot Ultra, Ultramax Junior 3008A 97 3288-214 BRUSHES (Light Blue PVA Foam) - Aquabot Plus RC 3009A 97 3288-025 BRUSHES (Black Sponge Foam) - Aquabot, Aquabot Turbo, Aquamax Jr, Merlin A2900 97 3288-026 BRUSHES (Black Sponge Foam) - Aquamax, Aquamax Biturbo A2901 99 REPLACE NLA DRIVE TRACK (Black) REP W/3288-113 3200 99 3288-113 DRIVE TRACK (Blue) 3201 99A 3288-149 DRIVE TRACK with TRACTION TABS (Blue) - For all Model G units 3203 100 3288-215 MODEL G SPACER BRACKETS ** necessary with Model G Drive Tracks 2675 101 3288-067 FILTER BAG (Fine) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Ultramax 8100 101 3288-068 FILTER BAG (Fine) - AB Ultra, Aquamax, Aquamax Biturbo 8101 101 3288-069 FILTER BAG (Mesh) - AB, ABTurbo, AB+RC, AMAX Jr, Merlin, Ultramax 8200 101 3288-070 FILTER BAG (Mesh) - AB Ultra, Aquamax, Aquamax Biturbo, PHV 100/200 8201 102 3288-065 FILTER BAG CLIP (Black, Short) - AB, AB Turbo, AB+RC, AMAX Jr, Ultrmax 8000 102 3288-066 FILTER BAG CLIP (Black, Long) - AB Ultra, Aquamax, Aquamax Biturbo 8001 103 3288-051 FILTER SCREEN (White, Cage) - AB, AB Turbo, AB+RC, AMAX Jr, Ultramax 5300 103 3288-052 FILTER SCREEN (White, Cage) - AB Ultra, Aquamax, Aquamax Biturbo 5301 103 3289-025 FILTER SCREEN (Plastic, Mesh) - Bravo, Merlin A5080S 104 3288-112 SCREW (#6, 11/16, Phil Pan-Flat Head, Pointed) - For securing the Filter Screen to the Body 2702 105 3288-152 BOTTOM LID ASSY. (White, W-shaped Wire Frame) - Aquabot A9200X 105 3289-014 BOTTOM LID ASSY. (Mint Green, W-shaped Wire Frame) - Merlin A9200XMG 105 3288-090 BOTTOM LID ASSY. (White, Square Wire Frame) - AB Ultra, Aquamax, Aquamax Biturbo A9201XC 106 3288-075 INTAKE VALVE FLAP (Black PVC Rubber) - AMAX, AMAX Biturbo, AB Ultra 9301 106 3288-216 INTAKE VALVE FLAP (Plastic) - Aquabot, AB Turbo, AMAX Jr, UMAX 9305B-B 106 3288-217 INTAKE VALVE FLAP (Black PVC Rubber) - ABOT, AB Turbo, AMXJr, UMAX A9300 107 OBSOLETE OBSOLETE LOCKING PLATE ASSY. (OLD, White, Plastic, w/ Spring, Screw, Washers) 9100 108 3288-028 H-FLOAT (Foam, Plastic, with Screws) - All wall-climbing units may need this to climb S3103 109 3288-029 SIDE POCKET FLOATS (White, Foam Rectangle Blocks)- Wall-climbing units may use them 3104 110 3288-218 POWER SUPPLY (3-Prong, Male Socket, 7hr External Dial Timer) - Aquabot Turbo 7073 110 3288-055 POWER SUPPLY (3-Prong, Male Socket) - Aquabot A7060 110 3288-219 POWER SUPPLY (3-Prong, Male Socket) - Aquabot Plus A7061 110 3289-015 POWER SUPPLY ASSY. Merlin 70162 110 3288-056 POWER SUPPLY (3-Prong, Male Socket) - Aquamax Jr HT, Aquamax Jr Plus, Aquamax A7063 110 3288-220 POWER SUPPLY (7-Pin, Male Socket, Wired RC) - Aquamax Biturbo RC A7064 110 3288-221 POWER SUPPLY (4-Pin, Male Socket) - Aquamax Biturbo A7065 110 3288-132 POWER SUPPLY (9-Pin, Male Socket, Radio RC) - All Ultramax units A7066 110 3288-222 POWER SUPPLY (OLD, 4-Pin Male, 7hr Internal Timer, Wired RC) - AB Turbo Solo / RC A7068 110 3288-141 POWER SUPPLY (7-Pin, Female Socket, Radio RC) - Aquabot Plus RC, Aquabot Ultra A7072 110 3288-223 POWER SUPPLY (4-Prong, Male Socket) - Aquamax Jr Plus RC A7082 110 3288-224 POWER SUPPLY (OLD, 7-Pin, Female Socket, Wired RC) - Aquabot Plus RC, Ultrabot A7083 110 3288-225 POWER SUPPLY (RARE, 7-Pin, Female Socket, Radio RC) - Aquabot Plus RC, Aquabot Ultra A7085 110 3288-226 POWER SUPPLY (4-Pin Male, 7hr External Dial Timer, Radio RC) - AB Turbo Solo / RC A7091 111 3288-062 SOCKET ASSY. (3-Pin, Male, 2-Wire) - ABOT, AB Turbo, JET unit s, AMAX Jr, AMAX) 7108 111 3288-063 SOCKET ASSY. (4-Pin, Male, 4-Wire) - AB Turbo Solo, AB Turbo RC, Aquamax Biturbo) 7135 111 3288-064 SOCKET ASSY. (7-Pin, Male, 7-Wire) - Aquabot + RC, Aquabot Ultra, All AMAX RC units 7136
Cleaners B-21 111 3288-133 SOCKET ASSY. (9-Pin, Male, 9-Wire) - Ultramax Jr, Ultramax 7140 111 3288-227 SOCKET ASSY. (7-Pin, Female, 7-Wire) - Aquabot Plus RC, Aquabot Ultra 7149E 112 3288-145 FUSE HOLDER (Standard, Push & Turn style) - All units Residential and Commercial 7005 113 3288-228 RESET SWITCH (Standard, Black button, 2-Wire) - ABOT Turbo, AB Turbo Solo/RC 7111 114 3288-060 LIGHTED SWITCH (Standard, Red, 3-Wire) - For every Power Supply 7106 * 3288-229 SCREW (Small, Pair) - AB+RC, AB Ultra, Umax Jr, have a brace to secure to the Body 1109 * 3288-230 SPACER (2-1/8, PVC, White) - For in between Body Assemblies on the Ultramax 2019 * 3288-110 INFRA RED SENSOR (Aquamax Jr Plus, Aquamax, Aquamax Biturbo) 2209 * 3288-231 NAIL PLUG (White, Plastic) - Use to plug small holes on the Body used for Anti-Roll Brackets 2400 * 3288-018 WASHER (White, 5/8 od, Nylon) - Use when Pin Support Bushing is shallow to take up space 2602 * 3288-027 CLIMBING RINGS (Light Blue PVA, 1 thick) - Use on any unit, fitted over Rubber Brushes ** 3007 * 3288-114 SCREW (Bolts, Long) - Aquabot Plus RC, AB Ultra, AMAX, AMAX BT, UMAX Jr, UMAX 3401 * 3288-232 WASHER - For Pulley Assembly - install with rounded edges facing Drive Belts 3607 * 3289-005 SPRING (Aluminum) - Two are used under the Handle Bracket of the Merlin and Bravo 5087 * 3288-233 FUSE (5.0 Amp, 250 Volt, Slow-Blow) - AB+RC, ABOT Ultra, all AMAX, all UMAX, all PHV 7002 * 3288-058 FUSE (2.5 Amp, 250 Volt, Slow-Blow) - ABOT, AB Turbo, ABT RC/Solo, Merlin, Bravo 7101 * 3288-147 ***SPACER BRACKET (w/ hardware) - Use when Dr. Motor Legs are too short for Pulley A3608 8299 * 3288-234 SCREW (Bolts, Extra-Long) - Ultramax - To secure Bodies together through center Side plates 8307 * 3288-235 SCREW (3-1/4, Phil Pan Head, Long) - For in between Body Assemblies on the Ultramax 8323 * 3288-048 PUTTY (Grey, Waterproof) - For waterproofing the Terminal Basin in all White Drive Motors 800001 * 3288-400 MAIN DRAIN BUMPER - For use on any Pool s main drain where a unit gets stuck 800135 * 3288-236 INSERT (Black, Cylinder, Long) - Insert in Handle through from inside the Side Plate of the Merlin 5084LBK * 3288-137 RECEIVER (OLD, Radio, 4-Way) - AB+RC, AB Ultra, UMAX **must use A220106 Transmitter A220103 * 3288-237 JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 2 IR, 2 Drive conn.) - UMAX Jr IR, UMAX Jr BB IR A2240S * 3288-125 JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 2 Drive connections) - Ultramax, UMAX Beach Boy A2241S * 3288-238 JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 2 Drive connections) - Ultramax Jr, UMAX Jr B.B. A2242S * 3288-239 JUNCTION BOX ASSY. (7-Pin Cable, 1 Pump, 1 Light, 2 Drive connections) - ABOT Ultra Lumina A2243L * 3288-240 JUNCTION BOX ASSY. (7-Pin Cable, 1 Pump, 2 Drive connections) - Aquabot Plus RC, AB Ultra A2243S * 3288-241 JUNCTION BOX ASSY. (7-Pin Cable, 1 Pump, 2 IR, 2 Drive connections) - ABOT Ultra Infra Red A2244S * 3288-126 JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 2 IR, 2 Drive connections) - UMAX IR, UMAX BB IR A2245S * 3288-242 JUNCTION BOX ASSY. (2-Wire Cable, 1 Pump, 1 Drive connections) - Aquamax Biturbo A2246S * 3288-243 JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 1 AS, 2 Drive conn.) - Ultramax w/ OLD Air Senor A2247S * 3288-244 JUNCTION BOX ASSY. (9-Pin Cable, 2 Pump, 2 IR, 1 AS, 2 Drive conn.) - UMAX IR w/ OLD A.S. A2248S * 3288-053 ROUND CONNECTOR (OLD 3-Pin Female, Grey 2-wire cable) - Used to replace Pump lead S6101 * NOT SHOWN