Product Description The Axion range offers a extremely strong semi permanent event structure, these units can be used in all weathers and can be installed in any location. Providing a contemporary space for any event. The Axion pneumatic advertising tent is a revolutionary advertising tool. It is modern, quick & easy to deploy which makes it suitable for events and promotions. AXION s structure is sealed and does NOT have a built-in fan. With an operational pressure of 14 kpa, it is able to withstand the most extreme of weather conditions. It takes up to 10 minutes to setup and break down the tent. The Axion range of structures can be tailored to suit your event needs, we offer branding with options including direct print and replaceable printed covers. Lite Square 4x4x2.9m tall 5x5x3.5m tall Hexa 4x4x2.9m tall 5x5x3.5m tall Shell 6x6x4.2m tall 7x7x4.9m tall 9.5x5.5x2.9m tall 11.5x5x3.5m tall 5.5x3.7x2.9m tall 6.9x4.5x3.5m tall
Axion Lite AXL33 LT AXL44 LT AXL55 LT A Outer width (cm) 330 400 500 B Outer length (cm) 330 400 500 C Outer height (cm) 285 290 350 D Inner height (cm) 265 265 320 E Height of entrance (cm) 210 205 240 F Built area (m²) 11 16 25 G Efficient roof area (m²) 6,6 / 60 10 / 61 15 / 61 H Tube diameter (cm) 20 24 30 Weight (w/o side walls, w. acc.) (kg) 20 25 30 Horizontal beams Zip-off changeable roof no no Reversible walls Dye sublimation print on roof Dye sublimation print on walls Fully serviceable by user no Reserve bladder included no Repair kit included AXION Lite is the budget version of AXION Square. Lite is a compact inflatable tent without horizontal beams, in which the roof is sewn onto the structure. It comes in 3 sizes and 3 basic colors. The roof and side walls come in 8 stock fabric colors. Visors, tunnels and other accessories are also available. Roof, all walls and visors can be printed in full color dye sublimation upon demand. The Axion range of structures can be tailored to suit your event needs, we offer branding with options including direct print and replaceable printed covers. AXL33 LT AXL44 LT AXL55 LT Scope of use indoor / outdoor Material POLYTEX 100% polter / TPU Flame retardancy EN 13501-1 on request Water resistance 2000 mm Packing bag bag bag Fits to ordinary passenger car Persons needed for installation 1 1 1 Time needed for installation (min) 10 10 15 Maximum wind resistance (km/h) 85 85 85 Use wind limit anchored (km/h) 51 51 51 Use wind limit with ballast bags (km/h) 22 22 22 220V or 12V blower TOP or BASE LED light (white or RGB) Water / Sand ballast bags Options Variable types of side walls Visors PVC or laminate floor Scope of standard delivery Includes inflatable frame without horizontal beams (3 colors available), fixed roof (3 colors available or dye sub printing), transport bag, steel anchoring set, ropes, hand pump, spare valves, repair kit.
- Lite Components & Accessories wall with door WD roof RSQ tunnel CT SMALL ROOF visor VIS STRUCTURE BLACK P123 P1665 P301 P342 SW section wall WHITE ON STOCK P468 P187 P295 P422 ON REQUEST FR WDO/WDB wall double opaque/ wall double blackout WALL BORDER BLACK P123 P1665 P301 P342 WP wall panorama WW wall with window WF wall full WHITE P468 WALL BOTTOM P187 P295 P422 WM wall mosquito Colour range
Axion Square AXL44 SQ AXL55 SQ AXL66 SQ AXL77 SQ A Outer width (cm) 400 500 600 700 B Outer length (cm) 400 500 600 700 C Outer height (cm) 290 350 420 490 D Inner height (cm) 265 320 385 445 E Height of entrance (cm) 205 240 250 295 F Built area (m²) 16 25 36 49 G Efficient roof area (m²) 10 / 61 15 / 61 27 / 75 37 / 75 H Tube diameter (cm) 24 30 36 42 Weight (w/o side walls, w. acc.) (kg) 30 35 50 66 Horizontal beams Zip-off changeable roof Reversible walls Dye sublimation print on roof Dye sublimation print on walls Fully serviceable by user Reserve bladder included Repair kit included AXION Square is the most popular member of the AXION family. All of the features of the AXION development like the horizontal stabilization beams, the central tube connector, the zip-off roof, and its availability in 4 sizes, makes it one of the most reliable inflatable tents on the market. AXION Square is proven to withstand winds up to 100 km/h, ranking the AXION product as one of the safest inflatable tents on the market. Brand managers would surely appreciate the possibility to use different branded roofs with one structure, easily changeable by the zip-off technology. The zip-off cover, walls, visors and the entire inflatable structure can be printed in full color dye sublimation upon demand. Scope of use Material Flame retardancy Water resistance AXL44 SQ AXL55 SQ AXL66 SQ AXL77 SQ outdoor / indoor POLYTEX 100% polter / TPU EN 13501-1 on request 2000 mm Packing bagpack bagpack bag bag Fits to ordinary passenger car Persons needed for installation 1 1 1-2 2 Time needed for installation (min) 10 15 20 25 Maximum wind resistance (km/h) 100 100 90 85 Use wind limit anchored (km/h) 60 60 54 50 Use wind limit with ballast bags (km/h) 22 22 18 18 Options Scope of standard delivery 220V or 12V blower TOP or BASE LED light (white or RGB) Inflatable frame incl. horizontal beams, changeable roof, transport bagpack, steel anchoring set, adjustable ropes, hand pump, spare leg bladder and valves, repair kit Water / Sand ballast bags Variable types of side walls Visors PVC or laminated floor Extra roof with different design Inflatable frame incl. horizontal beams, changeable roof, transport bag, steel anchoring set, adjustable ropes, 220V pump, spare leg bladder and valves, repair kit
- Square Components & Accessories wall with door WD roof RSQ tunnel CT SMALL ROOF visor VIS STRUCTURE BLACK P123 P1665 P301 P342 SW section wall WHITE ON STOCK P468 P187 P295 P422 ON REQUEST FR WDO/WDB wall double opaque/ wall double blackout WALL BORDER BLACK P123 P1665 P301 P342 WP wall panorama WW wall with window WF wall full WHITE P468 WALL BOTTOM P187 P295 P422 WM wall mosquito Colour range
Axion Hexa AXL44 HX AXL55 HX A Outer width (cm) 950 1155 B Outer depth (cm) 555 685 C Outer height (cm) 290 350 D Builded area (m2) 38 56 E Weight (w/o side walls, w. acc.) (kg) 52 65 F Inner height (cm) 265 320 G Height of entrance (cm) 200 230 H Tube diameter (cm) 24 30 Efficient roof area (m²) 28 / 73 41 / 73 Horizontal beams Zip-off changeable roof Reversible walls Dye sublimation print on roof Dye sublimation print on walls Fully serviceable by user Reserve bladder included Repair kit included AXION Hexa is the newest member of the AXION family. This inflatable tent comes in a hexagonal base shape that provides a large area of 56 sqm. It is the perfect solution for events where a rectangular base is needed and the neck of the connection tunnel causes difficulty. You can add walls to all sides or add tunnels to connect to other tents of the same or different size. All six openings can be equipped with a visor. The zip-off cover, walls, visors and the entire inflatable structure can be printed in full color dye sublimation upon demand. AXL44 HX AXL55 HX Scope of use outdoor / indoor Material POLYTEX 100% polter / TPU Flame retardancy EN 13501-1 on request Water resistance 2000 mm Packing bag bag Fits to ordinary passenger car Persons needed for installation 2 2 Time needed for installation (min) 15 20 Maximum wind resistance (km/h) 84 84 Use wind limit anchored (km/h) 51 51 Use wind limit with ballast bags (km/h) 22 22 220V or 12V blower TOP or BASE LED light (white or RGB) Water / Sand ballast bags Options Variable types of side walls Visors Scope of standard delivery Inflatable frame incl. horizontal beams, changeable roof, transport bag, steel anchoring set, adjustable ropes, 220V pump, spare leg, bladder and valves, repair kit.
- Hexa Components & Accessories roof hexa RHX SMALL ROOF WALL BORDER BLACK P123 P1665 P301 P342 WHITE P468 P187 P295 P422 WW wall with window VIS visor WFc wall full (central) WF wall full WD wall with door WP wall panorama STRUCTURE BLACK P123 P1665 P301 P342 WHITE P468 P187 P295 P422 ON STOCK ON REQUEST FR WALL BOTTOM Colour range
Axion Shell AXL44 SH AXL55 SH A Outer width (cm) 555 685 B Outer depth (cm) 370 450 C Outer height (cm) 290 350 D Inner height (cm) 265 320 E Height of entrance (cm) 250 300 F Built area (m 2 ) 12 18 G Efficient roof area (m²) 9 / 76 14 / 76 H Tube diameter (cm) 24 30 Weight (w/o side walls, w. acc.) (kg) 29 35 Horizontal beams Zip-off changeable roof Reversible walls Dye sublimation print on roof Dye sublimation print on walls Fully serviceable by user Reserve bladder included Repair kit included AXION Shell is a new model recently added to the AXION family. It comes in a triangular base shape that facilitates easy use for promotional events, or as a perfect modular corner part of the Square or Lite composition. You can add walls to all sides or add tunnels to connect to other tents of the same or different size. The zip-off cover, walls, visors and the entire inflatable structure can be printed in full color dye sublimation upon demand. AXL44 SH AXL55 SH Scope of use indoor / outdoor Material POLYTEX 100% polter / TPU Flame retardancy EN 13501-1 on request Water resistance 2000 mm Packing bagpack bagpack Fits to ordinary passenger car Persons needed for installation 1 1 Time needed for installation (min) 10 15 Maximum wind resistance (km/h) 50 50 Use wind limit anchored (km/h) 30 30 Use wind limit with ballast bags (km/h) 15 15 220V or 12V blower TOP or BASE LED light (white or RGB) Options Water / Sand ballast bags Variable types of side walls Extra roof with different design Scope of standard delivery Inflatable frame, changeable roof, transport bag, steel anchoring set, adjustable ropes, hand pump, spare leg, bladder and valves, repair kit.
- Shell Components & Accessories Colour range
Product Enhancement Branding Branding can be applied permanently to any of the Inflatable structures as screen print or digital printing at the source of production. Temporary branding can be added as vinyl or Dacron adhesive panels at any stage. Please note that not all artwork is suitable for printing on our structure range. It is advised sample artwork be supplied in an.eps format so we can advise the best solution. Full replaceable covers are available to the range. These can be branded and printed to ensure your structure matches your brand. Bespoke colours and materials All our structures are manufactured in ripstop nylon and reinforced PVC. As standard they are made in white and grey. Although a full colour range is available, this may alter lead times and costs. Other materials are available and we are happy to discuss specific needs / projects and will advise on what we feel is the most appropriate solution. All fabrics are tested for performance of flammability for textiles used in the construction of marquees and similar textiles structures to standards: BS 7837:1996 / BS 5438:1989. Lighting As an optional extra we can provide internal LED lighting systems which will transform the look and feel of your inflatable structure. The ambient lighting effect can be either one colour change or mixed to produce your perfect environment. Trussing The Air Dome range of inflatable structures have been designed to be used a free standing products, trussing is not required to use them, however trussing can be added to enhance the environment. Full internal trussing systems are available to compliment your event structure. These can be used to hang PA equipment or other lighting options. Doors & Closures All of the Air Dome range comes complete with zip in/ out doors as standard. Air Dome also offers full aluminium double door systems. These provide fire safety openers and are fully lockable which provides increased security. The door systems are bespoke and made to be installed perfectly into our doorways. Flooring Flooring is available upon request and is offered to suit all event needs. We offer simple snap lock flooring. This offers light weight flooring and ideal for grass and concrete. It can be further enhanced by adding a finishing carpet. We also offer aluminium / ply flooring which offers a professional and stable finish in any conditions. This type of flooring can take a number of finishers including carpet and wooden flooring. Modularity The entire Air Dome Range of Domes and Cubes can be joined together as the doorways are all standard. These can be jointed directly or by incorporating a space tunnel, these add an atmospheric walkway between the jointed structures and come in a range of lengths. Transport By its nature an inflatable structure packs down to considerably less than its inflated size. The largest of our range packs down to less than 2M which makes the structures ideal to store and use again. Each product will be supplied in its own storage bag and will be easily transported in an out of any venue. Warranty Air Dome offers a 12 month warranty on the manufacture process and materials if the user manual and install guides are followed. Due to the nature of weather and installation conditions, Air Dome reserves the right to carry out an onsite inspection and report which way the warranty will be meet.