At the beginning of shipbuilding business development the situation in Lithuania was not favourable as there were no berths and shipyards. We were searching for other opportunities exploring the global shipbuilding companies. We tried and the results showed that we are able to work according to global quality standards. We realized that we can find solutions that exceed customers expectations! This was our new opportunity. Today we are well known and this helps to gain confidence, but we also understand that only the professionalism, responsibility and continuous improvement will enable us to preserve our current position and move forward for even greater results and opportunities. Aleksandras Gridinas Main owner of Gridin s group 1 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 2
Main projects in 10 years 2007 2009 2001 2006 2006 2005 2005 2005 2004 2001 Renovation of sailing-vessel Meridianas (Lithuania) 2002 Renovation of the largest Riga cable-stayed bridge (Latvia) 2004 Dismounting of the third block at Ignalina nuclear power plant (Lithuania) 2005 Decommissioning and reconstruction of Atomium structure (Belgium) 2005 Renovation of Grendland bridge (Norway) 2005 Assembly and construction of Stena Line ferry superstructures (Norway) 2006 Inspection and renovation of Uddevalla bridge (Sweden) 2006 Inspection and renovation of Oresund bridge (Denmark) 2007 Fabrication of DSV, ROV, SRV vessels hulls (Sweden) 2009 Subcontractor of the world s largest cruise vessel Oasis of the Seas (Finland) 3 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 4
Shipbuilding and Ship Repair Hull building Conversion of vessels Steel constructions Aluminium constructions Piping production works Gridin s Group companies that started producing sections and blocks for the ship building industry as from 2002, today are experienced enough to carry out complex ship hull construction and various steel structure production projects. The company also mastered executing piping system production and assembly work. Today Gridin s Group employs no less than 700 professional and certified workers to the ship building and repair sector. 5 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 6
SHIPBUILDING AND SHIP REPAIR STX Turku (Finland) Building Sections And Grand-Blocks For The Biggest Cruise Vessels Landskrona Varvet (Sweden) Hull Construction For Supply Vessels Freedom Of The Seas Independence Of The Seas Liberty Of The Seas Oasis Of The Seas Alure Of the Seas 7 - GRIDIN S GROUP PRESENTATION Main dimensions of hulls: Length O.A. - 108,30 m Length P.P. - 96,60 m Breadth - 24,00/28,00 m Depth to 1st. deck - 6,60 m Depth to 2st. deck - 9,60 m Depth to 3st. deck - 12,50 m Depth to 4st. deck - 15,10 m Depth to 5st. deck - 17,90 m Frame spacing - 600 mm Accommodation for 72 for persons + hospital class: DNV*1A1, EO, RP, Comfort V(3)-C(3) Clean design, Naut AW, Heldk-SH, ICE C (hull only) NB 82 - m/v Geo Caspian NB 81 - m/v Deep Sygnus NB 78 - m/v Volantis NB 77 - m/v Geowave Endeavour NB 76- m/v Bibby Topa GRIDIN S GROUP PRESENTATION - 8
SHIPBUILDING AND SHIP REPAIR Aluminium constructions Piping systems 9 - GRIDIN S GROUP PRESENTATION 10
SHIPBUILDING AND SHIP REPAIR Heavy Steel Production For Machinery And Wind Turbines 11 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 12
Drydocking In Black And Baltic Sea Ports Gridin s Group companies started ship repairs activity in Klaipeda port of Baltic Sea from 2002, today are experienced enough to carry out complex ship repairs, conversions and various steel structure production projects in Baltic Sea port of Klaipeda (Lithuania) and Black sea ports of Odessa, Sevastopol and Kerch (Ukraine) in docking and alongside repairs. Company offers following works to be carried out and services provided: Dry-docking and alongside repairs; Maintenance and general repairs; Engine and other machinery repairs; Electrical repairs; Grit blasting and painting of hull, cargo holds, tanks; Steel works; Pipe works; Insulation works; Tail shaft and rudder repairs. Docking capacities in Black Sea area (Odessa, Sevastopol, Kerch) Length up to - 290 m Breath up to - 50 m Lifting up to - 60 m Crane up to - 75 t JSC "KLAIPĖDOS LAIVŲ REMONTAS" (Klaipėda, Lithuania) Floating docks: dimensions LxB = 65x14 m, 1200 tons dimensions LxB = 65x14 m, 1000 tons berthing up to 300 m length floating crane 100 t capacity 13 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 14
Rope Access Services JSC Gridins Enterprise LT specializes in variety of rope access services. Rope access techniques assist in reaching places of difficult access without use of scaffolding, cranes, or mobile platforms. The benefits of using rope access are proven and clear: exemplary safety record, time and cost efficiency, quick response teams - all factors that can provide considerable cost benefits in solving practical problems. Our membership in IRATA (International Rope Access Trade Association) opened the doors to Oil & Gas industry both onshore and offshore. Now IRATA requirements and guidelines are nearly universal and are widely used at offshore installations. Gridins Enterprise LT is not only a labor supplying company, we are also involved in project development from the very beginning to the end, presenting the whole set of project documentation and reports. Our multi-skilled staff is ready to meet industry challenges and perform a wide range of services. 15 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 16
ROPE ACCESS SERVICES Offshore Maintenance & Repair Rigging Water jetting Inspection Floating jack-up crane Wind Lift I Tank repair, Cyprus Chimney repair, Cyprus 17 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 18
ROPE ACCESS SERVICES High Rise Structures Bridges & Towers Fabric Maintenance bridge Grenlandbrua, Norway bridge Uddevalla, Sweden bridge Oresund, Sweden Aspire Tower, Doha, Qatar painting/blasting high pressure water jetting application of coatings industrial cleaning 19 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 20
ROPE ACCESS SERVICES Wind Turbine Maintenance Installation & Decommissioning cleaning repairs at the rotor blade repair of cracks corrosion treatment stadium works power plant services chimney decommissioning equipment & device installation 21 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 22
ROPE ACCESS SERVICES International Training Center The international training center provides the possibility to gain the skills and qualification of welders, painters, fitters, riggers as well as rope access technicians. The major attention is paid to rope access training service. We strongly follow the requirements of Irata and try to provide the possibility for technicians to operate in more real conditions during training. The technicians have the possibility to get training indoor facilities as well as outdoor. All the time we are cooperating with special forces, firefighters and emergency institutions. The training center provides the cooperate trainings for mentioned institutions. Gridins enterprise LT is a full member of Irata from 24 March, 2004 specializing in industrial rope access both off - and onshore. Since becoming a member our company has carried out some important steps to promote IRATA in Lithuania and to become a commited member. As a proof in early 2010 we designed and opened the international training center. Our doors are open to all willing to be certified: technicians from Egypt, Moldavia, Latvia, Estonia, Russia and Azerbaijan were certified. Total number of certified technicians from mentioned countries this year is 34. The international training center offers the training possibility both indoors and outdoor. The training center constructions are suitable for special forces, firefighters and other authorities needs. Center offers a fully equipped kitchen and canteen. All kitchen appliances are certified according to EU standarts. 23 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 24
Non-Destructive Testing UAB KlaipėdosNK cent ras is one of the Gridin's Group companies, based in Klaipė da, Lithuania. The company is involved in ultrasonic thickness measurements, condition evaluation of ships and steel structures, as well as other UT inspections all over the world. The company provides repair recommendations and consultanyfor c shipping and industry. General experience in Inspection works: NKC Currently holding the following valid approval certificates issued by: ABS, LR, DNV, GL, BV, RINA, RMRS. NKC implemented QMS system identical to ISO 9001:2000 as condition for approval gained by Classification Societies; however the QMS was not certified by any third party. Our partner within Gridins Group Gridins Enterprise, who provides us IRATA qualified and certified UTM operators is holding ISO 9001:2000 certificate issued by Lloyd s Register as well as IRATA trainer and operator certificate. Our specialization is wide range of automatic and manual inspections on metal structures (Marine & Industry) using Ultrasonic Technique & Equipment and qualified personnel, made according to any applicable standards (ISO, EN, ASME). The following techniques are used: P-scan for weld inspection; T-scan for corrosion mapping; Through Transmission for composite testing; TOFD for detection and sizing; Full A-scan recording for off-line processing; UTM of steel structures to determine residual thickness; UT Flaw Detection of welds. 25 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 26
NON-DESTRUCTIVE TESTING Ultrasonic Thickness Measurements When necessary, ultrasonic thickness inspection works may be carried out by IRATA certified rope access technicians. Such works are carried out in the places of restricted access without using scaffolding, staging or rafting. It ensures safe, quick, and efficient work without any additional Customer s expenses. Ultrasonic thickness measurements of any type of the vessel: bulk carrier, general cargo, oil tanker, crude oil tanker, chemical tanker, reefer, container, ro-ro, car carrier, liquified gas carrier, passenger ship or any other special type of the vessel. Experienced in CAP/CAS, URS-31, 19, 26, 27, and in providing technical assistance to Superintendent while repairs. Ultrasonic thickness measurments and inspections of industrial objects using rope access methods. Experience in carrying out work at significant heights. Reports with visual presentation of deficiencies. Preparation of work specifications. Assistance in close- up surveys using CCTV. 27 - GRIDIN S GROUP PRESENTATION GRIDIN S GROUP PRESENTATION - 28