ENGLISH
Marine Kettle Combination Stove & Gas Barbeque A10-008 Original Size Cooking area 154 sq. in. (994 sq. cm) Diameter 14-1/2 (368 mm) A10-018 Party Size Cooking area 204 sq. in. (1317 sq. cm) Diameter 17 (432 mm) High tech stainless steel radiant burner plate and dome system allows use as a BBQ, stove, or oven. Perfect even heat distribution as a BBQ, direct open flame cooking as a stove. Fully double lined stainless steel lower bowl. Quick release valve lock allowing safe, easy fuel change while cooking. Uses standard disposable propane cylinders (CV 270/ CV 470) or adapts to on-board LPG and CNG systems. 8 mounting options adapt to any boat. Mirror polished - 100% high grade 18-9 stainless steel for the ultimate in corrosion resistance. Only Magma s patented Marine Kettle design will give the safety, durability and performance required of a marine BBQ. Our patented stainless steel radiant burner plate and dome system allows you to place your standard pots and pans directly over the flame. Your MAGMA BBQ is now your Cockpit Cooking Center. You can boil, fry, heat, brew, grill, sauté, simmer, stew, and bake at your leisure. Great for boats without a galley. Made entirely of 18-9 stainless steel, our burner plate is designed to be very efficient. This means your MAGMA BBQ will use less fuel, heat up faster, and have you cooking in no time at all. It seals in the natural flavors and aromas that discerning BBQ aficionados expect. The unique lid design secures anywhere around the BBQ allowing hands free operation while creating a useful windshield for gusty wind conditions. Cleanup is easy. A twist of the burner instantly disassembles the BBQ for simple cleaning. Requires BBQ mounting hardware for complete installation. Radiant burner plate & dome system available to upgrade earlier Magma Gas BBQ S. All replacement parts in stock and readily available. *AFNOR # 0049 49AP198 - High tech 18-9 stainless steel radiant burner plate and dome system allows use as a stove, oven or BBQ! Marine Kettle Gas Barbeque A10-006 Cooking area 154 sq. in. (994 sq. cm) Diameter 14-1/2 (368 mm) Mirror polished - 100% high grade 18-9 stainless steel for the ultimate in corrosion resistance. Stainless steel radiant screen and ceramic briquets provide perfect even heat distribution. Attached grill and lid (lid acts as windshield in gusty wind conditions). Quick release valve lock allowing safe, easy fuel change while cooking. Uses standard disposable fuel cylinders (CV 270/CV 470) or adapts to on-board LPG and CNG systems. 8 mounting options adapt to any boat. Made of 100% 18-9 mirror polished stainless steel, this barbeque was designed for economy without sacrificing function. It has the same features of our A10-006 Combination Stove and Barbeque but without the double lined bowl, and radiant burner plate and dome system. Instead, it uses our time-tested, highly efficient radiant screen and briquet heating system to achieve hot and even temperatures using a minimum of fuel. Our special ceramic briquets are designed to reduce flare-ups. Requires BBQ mounting hardware for complete installation. All replacement parts in stock and readily available. *AFNOR # 0049 49AP198 - Marine Kettle Charcoal Barbeque A10-004 Original Size Cooking area 154 sq. in. (994 sq. cm) Diameter 14-1/2 (368 mm) A10-014 Party Size Cooking area 204 sq. in. (1317 sq. cm) Diameter 17 (432 mm) Attached grill and lid (lid acts as windshield in gusty wind conditions). Attached rotating adjustable cooking grill. Complete temperature control. Lower charcoal grate and sealed ash compartment. 8 mounting options adapt to any boat. Mirror polished - 100% high grade 18-9 stainless steel for the ultimate in corrosion resistance. Our time-tested original charcoal Marine Kettle is also available in Party Size with 33% more cooking area than our original. It is meticulously crafted of 100% 18-9 mirror polished stainless steel for maximum corrosion resistance. Starts easily in windy conditions by using the lid as a windshield. You obtain perfect results through use of the rotating, adjustable height cooking grill and the variable temperature draft control door. Our Marine Kettle design allows oven type baking to enhance the barbeque flavor while retaining the natural juices in the food. It will cook more food faster on less grill area than any other charcoal barbeque. Safety and efficiency are obtained by closing the temperature draft control door and extinguishing the coals for future use. Requires BBQ mounting hardware for complete installation. All replacement parts in stock and readily available.
BARBEQUE MOUNTING HARDWARE Round Rail Mount A10-080 Fits 7/8 or 1 rails (22 mm or 25.5 mm) A10-085 Fits 1-1/8 or 1-1/4 rails (28.5 mm or 32 mm) This round rail, quick-disconnect, all angle mounting bracket is made entirely of 18-8 stainless steel and 356 anodized aluminum to endure the most severe marine environment. Fits any angle railing and detaches quickly for storage without tools leaving no hardware on the rail. Deck Socket Mount A10-120 This mount is made of 18-8 stainless steel and triple chrome plated brass. A stainless detent pin lets the BBQ rotate and lock in four different positions. Rod portion of mount quickly disconnects for compact storage. Fasteners required for installation. POW R GRIP Fish Rod Holder Mount A10-175 Fits 1-1/2 to 1-7/8 inside dia. rod holders (38 mm to 47.5 mm) Side (Bulkhead) Mount or Square/ Flat Rail Mount A10-240 Made of 18-8 stainless steel and durable all weather plastic, this vastly improved versatile mount fits most cylindrical type rod holders. It allows BBQs to mount in any direction from the rod holder. Its unique quick disconnect system allows instant installation or storage after use without tools. Replaces the A10-130 Fish Rod Holder Mount. (Rod holder not included). This all 18-8 stainless steel mount attaches to any vertical flat surface such as bulkheads, hulls, transoms or cabin sides. Also mounts to square and flat rails. Fits HORIZONTAL RAILS up to 2-1/4 (57 mm) high by any depth or VERTICAL RAILS up to 1-5/8 (41 mm) wide by any depth. Rod portion of mount quickly disconnects for easy storage. Fasteners required for installation. Mounting Extension A10-140 On Shore Stand A10-650 (for all gas or charcoal Marine Kettle BBQ s) This all 18-8 stainless steel extension adds 8 (20 cm) to all Magma A10 series Marine Kettle BBQ mounting brackets. (Not necessary in most applications) Cook on shore with this 18-8 stainless steel and brass barbeque stand. It easily collapses for flat compact storage without tools. (Not for use on boats).
BARBEQUE ACCESSORIES Magma Marine Kettle BBQ Covers Made of water and fade resistant Sunbrella boat cover material to resist damage from sunlight and mildew. Available in boating s 6 most popular Sunbrella colors Original Size Forest Green Pacific Blue Burgundy Jet Black Royal Blue Captain s Navy A10-191FG A10-191PB A10-191BU A10-191JB A10-191RB A10-191CN Party Size Forest Green Pacific Blue Burgundy Jet Black Royal Blue Captain s Navy A10-491FG A10-491PB A10-491BU A10-491JB A10-491RB A10-491CN 100% All 18-8 Stainless Steel Wok A10-290 The ancient culinary art of wok cooking is now available in 100% 18-8 stainless steel. This high quality, beautiful wok is perfectly proportioned to fit the Magma Marine Kettles, the Del Mar Residential BBQ or your in-home or on-board appliances. For pre-regulated, low pressure, on-board Propane systems. This stainless steel and brass control valve is designed to connect to the low pressure side of the regulator. Control Valve (for on-board gas systems) A10-221 Pipe Bushing 1/4 BSP x 1/8 NPT 8 mm 6 mm Includes an 8 mm hose barb adapter, a 6 mm hose barb adapter and a Pipe Bushing 1/4 BSP x 1/8 NPT adapter. Hose not included. Easy Light Charcoal Starter A10-150 Made of 18-8 stainless steel, it lights charcoal in windy conditions while adding years of life to your Magma charcoal barbeque by protecting the threaded center rod from continuous overheating. Measures the correct amount of charcoal and comes with a removable cooling hanger. Cooking Utensils A10-280 Spatula A10-281 Tongs A10-282 BBQ Brush A10-283 Fork A10-284 Complete Set Wide mirror polished 304 grade stainless steel blades and substantial ergonomic non-slip handles for the ultimate in cooking control. The grill brush has 100% brass bristles. The professional style fork has forged stainless steel prongs. Propane/Butane Canister Storage Locker/Tote Bag A10-210 Safe, convenient and essential for boats without approved propane or butane gas storage lockers. Stows 3 disposable butane or propane canisters safely out-over-the-water. Made of water and fade resistant heavy duty nautical blue polyester boat cover material. Has heavy nylon adjustable straps with snap connectors for attaching to a horizontal rail or lifeline. Radiant Burner Plate & Dome System 10-165 This state-of-the-art system allows Magma gas BBQ s to be used as a BBQ, oven or stove! It provides perfect even heat distribution as a BBQ and direct open flame cooking as a stove. Made of 18-9 stainless steel. Fits Magma models A10-008 and A10-018. Fish & Veggie Grill Tray A10-295 For grilling flaky fish, vegetables, and smaller items, or use it with our Wok as a steamer tray. Made of marine grade 304 Stainless Steel, this professional grilling accessory keeps those small delicacies from falling through the grill. The convenient removable rubber coated handle makes the grill tray easy to use and to store.
SINGLE-MOUNT TABLES (SM) Bait/Filet Mate Serving/Cutting Tables T10-302 12-3/4 x 20 (32.5 cm x 51 cm) T10-303 12-1/2 x 31 (32 cm x 79 cm) Bait/Filet Mate cutting and serving tables may be used for food or cocktail service, for bait preparation, or for cleaning the catch of the day. They feature 2 filet knife holders and a handy receptacle for your fishing pliers. The slot at the back of the tables permits water drainage from the work surface when you clean or filet your favorite seafood. The Bait/Filet Mate is virtually indestructible and more practical and sanitary than wooden cutting boards. They do not absorb fish odor, will not crack or mildew and are maintenance free. They are made of the finest commercial cutting board material available, FDA approved and UV stabilized high-density polyethylene. All edges and corners are rounded for your safety. Your Bait/Filet Mate will keep your deck free from messy scales and residue. Our T10-302 Bait/Filet Mate is especially useful on small open craft where storage is limited. Our larger T10-303 table is big enough for any bait work and excellent for fileting the big ones that didn t get away. Single-Mount (SM) mounting hardware is required for complete installation. Filet knives and pliers not included. SINGLE-MOUNT TABLE MOUNTING HARDWARE (SM) Round Rail Mount T10-380 7/8 or 1 rails (22 mm or 25.5 mm) T10-385 1-1/8 or 1-1/4 rails (28.5 mm or 32 mm) This incredibly strong rail mount will not slip on the rail. It attaches any Magma (SM) table to horizontal round rails and features two way angle adjustment for perfect horizontal leveling. Made of 18-8 Stainless steel and 356 anodized aluminum, it quickly detaches without tools for compact storage leaving no hardware on the rail. Great for mounting other items such as solar panels, fish finders, or just about anything else onto horizontal or vertical round rails. LEVELOCK All-Angle Fish-Rod Holder Mount T10-350 Nothing on the market compares to our newest, most versatile fish rod holder table mount. It s made of heat treated stainless steel and hard anodized aluminum. The quick release cam action design allows convenient all angle adjustment. The 1-1/2 (38 mm) 18-8 stainless steel tube fits into most cross pin type rod holders in 8 different rotational positions. Folds flat for compact storage. (Rod holder not included). Third Mate Cockpit Table T10-306 12 x 24 (30.5 cm x 61 cm) The Third Mate cockpit table is truly a third hand when preparing and barbequing food or serving beverages in the cockpit. This versatile table is made of the same material and has all the great features of the Bait/Filet Mate with some additional features. The windscreen, made of nautical blue polyester boat cover material, is supported by four stainless steel uprights and provides protection against gusty wind and choppy sea conditions. It also features a full length front guard rail and a stainless steel towel and utensil rack. The windscreen detaches quickly for compact storage. Single-Mount (SM) mounting hardware is required for complete installation. The Original BOAT UMBRELLA B10-401 Multi-Color B10-402 Blue UMBRELLAS Special patented windproof design. Quick release all-angle round rail mount made of durable stainless steel and anodized aluminum, quickly adjusts to any position. 2 piece fiberglass shaft with chrome brass joint. Colorful, fade resistant acrylic coated nylon fabric. All New Windproof Design! Designed to withstand the tough marine environment. Special patented annular baffle uses the force of the wind by trapping air inside the dome. This pushes down on the umbrella with the same force the wind pushes upward.
Magma s Combination Stove & BBQ for Boats! 10 reasons why we re the best! 1. Entire barbeque is made of superior quality 18-9 stainless steel and mirror polished for the ultimate in corrosion resistance. 2. Magma s patented design gives the hottest temperature with the least amount of fuel of any BBQ and distributes the heat evenly across the cooking surface. 6. Attaches anywhere on your boat with the largest and most diverse selection of mounting options. 7. Attached grill and lid (lid acts as a windshield in gusty wind conditions). 8. 100% all stainless steel burner. 3. Combination easy-to-clean grease catch pan/wind baffle keeps the wind gusts out while keeping the flames and grease in. 4. Newly redesigned valve/regulator allows precise temperature adjustment. 5. Swiveling venturi tube with quick release lock allows safe, easy fuel change while cooking. 9. Fully double lined stainless steel bowl guards against discoloration and adds years of life to the BBQ. 10. New patented 18-9 stainless steel radiant heating plate system allows use as a stove, oven or BBQ. Emits no toxic gases into food as do aluminum heating plates. Allows you to place your standard pots and pans directly over the flame! MAGMA PRODUCTS, INC. 3940 Pixie Avenue Lakewood, CA 90712 (001) +1(562)-627-0500 Fax: (001) +1(562)-0550 E-mail: mail@magmaproducts.com www.magmaproducts.com 64-011UK