Honeywell Safety Products Protective Clothing Solutions
Single Use Protective Clothing Mutex Light Enhanced protection Tear resistant crotch design Certified against biological agents Good resistance to tearing and liquid penetration Ergonomics & comfort Lightweight for even greater comfort Elasticated wrists and ankles 3-piece elasticated hood: for a better fit Dual slider zip Silicone and latex free Applications Chemical/petrochemical industry Industrial Maintenance Construction/Building and Public Works Asbestos removal DIY Waste disposal Landscaping Deltasafe Enhanced protection Certified under NFP 92-507: flame retardant material, limits the propagation of flames Antistatic Double flap inside and outside Very good abrasion, tear and perforation resistance Ergonomics Excellent b as comfortable as a T-shirt Dual slider Dual slider zip Applications Chemical/petrochemical industry Refineries Nuclear industry Repair and industrial maintenance Utilities Services EN 1073-2* M1 NFP92507 FR EN ISO 14116:2008** M1 Flame-retardant material Zip with dual slider EN 14126 EN 1073-2 4571450 DeltaSafe Coverall with Hood Polypropylene, 60 gm/m² 4500500 Mutex Light Polypropylene laminated with a microporous polyethylene film, 65 gm/m² * Does not protect against radiation. ** Materials in compliance with the EN ISO 14116:2008 Index 1/0/0 standard. Index 1 materials must not be worn directly on the skin but over an Index 2 or 3 undergarment, in compliance with the EN ISO 14116:2008 Index 1/0/0 standard. Protection against the propagation of flames Essian Light Essian FR Essian Light is: antistatic Silicone & latex free Excellent ergonomics and fitting: a 3-piece hood a special crotch design an outside flap Breathability: 3-layer polypropylene Enhanced protection EN 533 and EN 14116 certified: flame retardant material, reduces the risk of fire Ultra wide seams for better resistance against stress Tear resistant crotch design Ergonomics Soft and lightweight raw material for greater comfort 3-piece hood: for a better fit Dual slider zip Silicone and latex free Applications Chemical/petrochemical industry Industrial maintenance, Transport Dual slider zipper 3-piece hood Ultra wide seams EN 1073-2 4500100 Essian Light is a type 5 & 6, antistatic and radioactive particles certified coverall with elasticated hood, waist, wrists & ankles 3-layer polypropylene, 56g/m² EN 1073-2 FR EN 14116 4500300 Essian FR Nonwoven Viscose, 90 g/m²
Single Use Protective Clothing Jumpsuit High weight for better protection and opacity High quality zip Elasticated and ergonomic hood 2 pockets Light, Breathable and Comfortable Excellent breathability Applications Hygiene Cleaning Food industry Catering Pharmaceutical industry/laboratories Factory visits PPE Category 1 4571435 Blue polypropylene coverall. Elasticated hood, wrists and ankles. 2 pockets Polypropylene, 40 gm/m² XL & PPE Category 1 4180143 Jumpsuit polypro white/ hood, waist, cuf Polypropylene, 40 gm/m² L/XL/ Spacel Comfort Medium Spacel Comfort Heavy Enhanced protection Lightweight Stitched and taped seams Elasticated wrists for resistance equal to and ankles that of the material 3-piece elasticated Double flap and hood: for a better fit double zipper for Dual slider zip Knee pads Adhesive outer flap Tear resistant crotch design Very good resistance to tearing and Excellent visibility: brightly colored Ergonomics & comfort Silicone and latex free Applications Chemical/ petrochemical industry Industrial cleaning Decontamination Industrial maintenance Civil engineering Pharmaceutical industry Enhanced protection Stitched and taped seams for resistance equal to Double flap and double zipper for optimum protection Knee pads Adhesive outer flap Tear resistant crotch design Good tear resistance Excellent chemical resistance Ergonomics & comfort Elasticated wrists and ankles 3-piece elasticated hood: for a better fit Dual slider zip Silicone and latex free Applications Chemical/petrochemical industry Industrial cleaning Decontamination Industrial maintenance Civil engineering Pharmaceutical industry Type 3, 4, 5 & 6 EN 1073-2 EN 14126 Type 3, 4, 5 & 6 EN 1073-2 EN 14126 4506000 SPACEL Comfort Medium Laminated polypropylene with polyethylene film, 80 g/m² 4507000 SPACEL Comfort Heavy Polypropylene laminated
Single Use Protective Clothing Rain Light Liquids, light rain attire Tightness: no seams, smooth fabric Better resistance: Polyethylene material, 100µ thickness Better visibility: Yellow color Mutex Light overboots Mutex light Overboots is Antistatic Mutex light overshoes have a better fitting: Elasticated ankles 4 adjustables laces Mutex light overshoes provides better protection: Non-slip sole High resistant EN 1073-2 EN 14126 PPE Category 1 4575045 Set of attire rain which protects against liquids (low hazards) and chemical liquids Polythelyne, Thickness 100 micron M to XL 4550000 Mutex light overshoes is antistatic, lightweight and resistant Laminated polypropylene with polyethylene film, 65g/m² Suitable for security shoes up to Spacel Comfort Medium overboots Spacel Comfort Medium overboots Better fitting: Elasticated ankles 4 adjustable laces Better protection: Liquid tight Non-slip sole Excellent resistance Spacel Comfort Heavy overboots Spacel Comfort Heavy Better fitting: Elasticated ankles Better protection: Non-slip sole Excellent resistance Type 3, 4, 5 & 6 EN 1073-2 EN 14126 4560000 Spacel Comfort Medium overboots are antistatic and have non-slip sole, elasticated calves & 4 adjustable laces for a better fitting Laminated polypropylene with polyethylene film, 80 g/m² Suitable for security shoes up to 45 (11) Type 3, 4, 5 & 6 EN 1073-2 EN 14126 4570000 Spacel Comfort Heavy overboots are antistatic, have a non-slip sole and elasticated Laminated polypropylene with polyethylene film, 155 g/m² Suitable for security shoes up to 45 (11)
Reusable Protective Clothing Northylon Suits and Hoods Polyamide provides excellent mechanical resistance Good chemical resistance Enhanced protection with its double flap and press stud over the zip The hood has a cap with neck and shoulder cover with fixed visor and apron front All seams are sewn and welded to give increased protection in vulnerable areas Type 4 Patrol Suits Applications Chemical/Petrochemical industries, utilities, urgency services Enhanced protection Hooded model with a gas-proof elastic foam rubber Included nitrile gloves with o-ring system Sealed nitrile rubber safety boots Gas tight zipper Must be worn with a full face mask + Self Contained Breathable Apparatus (SCBA) - not supplied SCBA worn outside the suit Advantages High chemical & mechanical resistance Optimal protection Gastight Ergonomics N71200X10 Coverall with collar N71250X10 Coverall with hood N71252X10 N71254X10 FS2N N72750002 FS2N N72750003 FS2N N72750005 Easychem Coverall with hood, elasticated wrists Coverall with hood, elasticated wrists and ankles Hood with polycarbonate visor and neck guard Hood with polycarbonate visor and wide breastplate High protection factor thanks to the overpressure in the suit High frequency welding for increasing chemical and mechanical resistance Comfort of use and safety thanks to a wide visual field Durable and resistant because of gas tight protected zip fastener protected by a flap and gloves Higher safety and easy of use with the integrated welded safety One Size One Size One Size Type 1 EN 943-1 A140340 Guardian Plus Coverall Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles, non-ventilated, gas-tight (Type 1b) chemical protective suits, series High chemical resistance thanks to neoprene Good mechanical resistance and durability Antistatic raw material with a performance of 10e10 Ohm according to EN 1149-1 standard Flame Retardant raw material with a M2 performance according to NFP 92507 standard Ergonomics Easy-system to change gloves Velcro at ankles for a better adjustment Improved safety thanks to an inner gusset and covered zipper with a double velcro flap Possibility to add a hood (ref. A163422) Neoprene, Weight M to Type 1 EN 943-1 CC890707T SCBA inside the coverall Polyester reinforced Fennec; 350 g/m² CC880707T SCBA outside the coverall Polyester reinforced Fennec; 350 g/m² XL XL Type 3 & 4 A164223 Type 3 & 4 hooded coverall with included gloves with o-ring system. Straight legs with velcro, inner gusset and covered zipper with a double velcro flap. Possibility to remove and/ or change the hood (ref. A163422) Double-side coated polyamide with Neoprene 360g/sqm
Technical Work Wear Multisafe Range Shirt collar Two-way zip fastening with double inner flap and outer flap with press-studs Semi-elasticated wrist adjustment Elasticated at the waist 4 pockets: 2 slanted waist pockets with flap with flap and press-stud Straight leg Retro-reflective label with standard pictograms on the right leg Type 6 Press-stud fastening and double flaps (inside and outside) Semi-elasticated wrist adjustment Waist with elasticated sides breast pocket and flap and press-stud Retro-reflective label with standard pictograms at the bottom right-hand side Zip fastening with flap and press-stud Belt loops and 1412089 Multisafe Coverall EN11611 250 g/m²; 84% cotton, 15% polyamide, 1% antistatic fibre, X Multisafe Comfort Range Shirt collar Press-stud fastening and double flap (inside and outside) Semi-elasticated wrist adjustment with flap and press-stud Retro-reflective label with standard pictograms at the Two-way zip fastening with inner flap and outer flap with press-stud fastening Straight leg Zip fastening with flap and press-stud Belt loops and side-elasticated waist 1412070 Multisafe Jacket 250 g/m²; 84% cotton, 15% polyamide, 1% antistatic fibre, X EN11611 1412093 Multisafe Pant Flamepro Range Mao collar, Velcro 3 patch pockets: 1 left breast pocket and 250 g/m²; 84% cotton, 15% polyamide, 1% antistatic fibre, Retro-reflective label with standard pictograms Zip fastening with flap and press-stud Belt loops and side-elasticated waist pockets: 1 at the back on the right-hand side, and Straight leg Retro-reflective label with standard pictograms on the left leg Wide shoulder coverage Retro-reflective label with standard pictograms on the lower left-hand side X Type 6 1415130 Multisafe Comfort Jacket 1415131 Multisafe Comfort Pant 1415134 Multisafe Comfort Coverall Northylon Heavy Apron A48 Excellent chemical resistance Good mechanical resistance and durability 165 g/m²; 93% Nomex, 5% Kevlar, 2% antistatic fibre, fluorocarbon treatment, aramid thread 165 g/m²; 93% Nomex, 5% Kevlar, 2% antistatic fibre, fluorocarbon treatment, aramid thread 165 g/m²; 93% Nomex, 5% Kevlar, 2% antistatic fibre, fluorocarbon treatment, aramid thread X X X EN11611 Type 6 4111814 FlamePro1 Jacket 4111812 FlamePro1 Pant 4111808 FlamePro1 Coverall 4101813 FlamePro1 Hood 335 g/m²; 100% cotton, flame- X 335 g/m²; 100% cotton, flame- X 335 g/m²; 100% cotton, flame- X 3XL 335 g/m²; 100% cotton, flame- Unique Type 4 EN 1073-2 N70453935 Type PB[4] (partial Body) apron designed to be used for maintenance, industrial cleaning and handling. Double-side PVC coated Nylon 400g/sqm Unique
Technical Work Wear Mao collar, Velcro Collar is lined for greater comfort, 100% flame-retardant-treated cotton inner lining Press-stud wrist adjustment Length: 90cm Centre press-stud Collar is lined for greater comfort, 100% flame-retardant-treated inner lining Straight leg Lateral fastening with wide Velcro strips Leather support strap under the sole with adjustable buckle Length: 45cm Packed: in pairs Apron with adjustable straps at the neck Comfortable and practical: straps designed in 100% flame-retardant-treated cotton with adjustable plastic buckles Length: 100cm Mao collar, Velcro Collar is lined for greater comfort, with Double safety fastening via inner flap with Velcro Length: 115cm Alupro Range Wide shoulder coverage Large tempered glass, gold Leather Range Two-tone apron in gray and blue split leather (heat retro-reflective) Comfortable and resistant: apron adjustable using straps around the neck and waist, in 100% flame-retardant Available in two lengths: 90cm and 110cm Mao collar in 100% flame-retardant cotton with Velcro fastening Press-stud fastening with flap Upper front and complete back of the jacket in 100% flame-retardant cotton: flexible, lightweight and reflects the heat Press-stud wrist adjustment Split leather sleeves protect the forearm Elasticated at both ends: better support and an easy fit with gloves Length: 40cm Packed: in pairs Split leather gaiters with double Velcro lateral fastening: one fits all, and remain resistant Covers the entire shoe Double fastening with understrap and plastic buckle loop Packaged: in pairs Front of pants in split leather Back in 100% flame-retardant cotton Belt loops in Blue split leather Waist lined in 100% flame-retardant cotton Press-stud fastening Straight leg ref. 9600013.000 1410F34 AluPro Jacket 465 g/m²; 100% aluminised para- 1410F35 AluPro Pant 465 g/m²; 100% aluminised para- 1410003 AluPro Gaiter 465 g/m²; 100% aluminised para- One 1410033 AluPro Apron 465 g/m²; 100% aluminised para- One 1410113 AluPro Coat 465 g/m²; 100% aluminised para- 1410155 AluPro Hood 465 g/m²; 100% aluminised para- One 4100480 FlamePro2 Apron Split leather, Blue & Gray One 4101180 FlamePro2 Apron Split leather, Blue & Gray One 4104932 FlamePro2 Jacket Front in split leather, Back: 100% flame-retardant cotton 4104934 FlamePro2 Pants Front in split leather, Back: 100% flame-retardant cotton M to M to 4302726 FlamePro2 Cuffs Split leather One 4305221 FlamePro2 Gaiters Split leather One
European Standards The European Economic Community adopted Directive 89/686/EEC in 1989, which defines the requirements that must be met by Personal Protective Equipment in order to preserve the health and safety of users. The hazards are divided into three categories Category 1 Category 2 Category 3 Minor hazards Intermediate hazards Serious or fatal hazards Pictogram Description Standards Chemical protection - Types 3, 4, 5 and 6 Protection against the build-up of electrostatic charges* EN 14605 Types 3 and 4 EN 13982-1 Type 5 EN 13034 Type 6 Protection against biological agents EN 14126 To help you choose the right protective clothing, 6 levels of protection or types have been defined by the european union: Type Pictogram Description Standards Type 1 Gas-tight clothing EN 943-1 EN 943-2 Type 2 Non gas-tight clothing EN 943-1 FR M1 Protection against radioactive contamination** in the form of particles Protection against the propagation of flames*** Protection against the propagation of flames*** EN 1073-2 EN 14116 (new norm EN533) NFP 92-507 ATEX Group IIIA, IIIB, IIIC, dust zones 21 & 22 EN 13463-1:2009 Type 3 Type 4 Type 5 Type 6 Protection against liquid chemicals in the form of jets (high speed projection) Protection against liquid chemicals in the form of spray Protection against solid chemicals suspended in the air (solid particles) Protection against liquid chemicals in the form of small splashes EN 14605 EN 14605 EN 13982-1 EN 13034 * To ensure proper grounding, static electricity cannot be managed in an separate garments (jacket, pants, etc.) but always within a complete system of ** Does not protect against radiation - *** Does not protect against flames - Limited burning if it catches fire - Not for use in the event of fire. Honeywell Safety Products P.O. Box 232362 Emaar Business Park Dubai, U.A.E. Tel: + 971 4 450 5800 Fax: + 971 4 450 5900 Email: hsp-meai@honeywell.com http:// DOC5014 September 2015 2015 Honeywell International Inc.