EASA e-eamination Syllabus Doc # FO.TT.00053-00- -E.748-.00-00-0 I. EXAM DATA ID: E.748-.00-00 Name: Commission Regulation (EU) 748/0 Date of Issue: 7.0.0 Eam Type: Open book / Multiple choice Language: English Version: 0 No of Questions: 3 Duration: 45 min Pass Mark: 75% Description: This eam is based on:. COMMISSION REGULATION (EU) No 748/0 of 3 August 0 laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and production organisations (recast) Table. II. EXAM TOPICS/QUESTIONS. Question Knowledge : - General - Detailed 5 No of Questions COMMISSION REGULATION (EU) No 748/0 of 3 August 0 laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and production organisations (recast) Articles Article Article Article 3 Article 4 Article 5 Article 6 Article 7 Article 8 Article 9 Article 0 Article Article Anne I ( Part-) 3 Anne I ( Part-) Point. Anne I (Part-) Section A - TECHNICAL REQUIREMENTS 5 Anne I (Part-) Section A Subpart A - GENERAL PROVISIONS.A. Scope.A. Undertaking by another person than the applicant for, or holder of, a certificate.a.3a Failures, malfunctions and defects.a.3b Airworthiness directives.a.4 Coordination between design and production Anne I (Part-) Section A Subpart B - TYPE-CERTIFICATES AND RESTRICTED TYPE-CERTIFICATES.A. Scope.A.3 Eligibility.A.4 Demonstration of capability.a.5 Application.A.6A Airworthiness codes 4 3 Table. 3 Page of 6
.A.6B Special conditions.a.7 Type-certification basis.a.8 Designation of applicable environmental protection requirements and.a.9 Changes requiring a new type-certificate.a.0 Compliance with the type-certification basis and environmental protection requirements.a. Issue of a type-certificate.a.3 Issue of a restricted type-certificate.a.3 Type design.a.33 Inspection and tests.a.35 Flight tests.a.4 Type-certificate.A.44 Obligations of the holder.a.47 Transferability.A.5 Duration and continued validity.a.55 Record-keeping.A.57 Manuals.A.6 Instructions for continued airworthiness Anne I (Part-) Section A Subpart D - CHANGES TO TYPE- CERTIFICATES AND RESTRICTED TYPE-CERTIFICATES.A.90A Scope.A.90B Standard changes.a.9 Classification of changes in type design.a.9 Eligibility.A.93 Application.A.95 Minor changes.a.97 Major changes.a.0 Designation of applicable certification specifications and environmental protection requirements.a.03 Issue of approval.a.05 Record-keeping.A.07 Instructions for continued airworthiness.a.09 Obligations and EPA marking Anne I (Part-) Section A Subpart E - SUPPLEMENTAL TYPE CERTIFICATES.A. Scope.A.A Eligibility.A.B Demonstration of capability.a.3 Application for a supplemental type-certificate.a.4 Showing of compliance.a.5 Issue of a supplemental type-certificate.a.6 Transferability.A.7 Changes to that part of a product covered by a supplemental typecertificate.a.8a Obligations and EPA marking.a.8b Duration and continued validity.a.9 Manuals.A.0 Instructions for continued airworthiness Anne I (Part-) Section A Subpart F - PRODUCTION WITHOUT PRODUCTION ORGANISATION APPROVAL.A. Scope.A. Eligibility.A.4 Application.A.5A Issue of a letter of agreement.a.5b Findings.A.5C Duration and continued validity.a.6 Production inspection system.a.7 Tests: aircraft.a.8 Tests: engines and propellers Page of 6
.A.9 Obligations of the manufacturer.a.30 Statement of conformity Anne I (Part-) Section A Subpart G - PRODUCTION ORGANISATION APPROVAL.A.3 Scope.A.33 Eligibility.A.34 Application.A.35 Issue of production organisation approval.a.39 Quality System.A.43 Eposition.A.45 Approval requirements.a.47 Changes to the approved production organisation.a.48 Changes of location.a.49 Transferability.A.5 Terms of approval.a.53 Changes to the terms of approval.a.57 Investigations.A.58 Findings.A.59 Duration and continued validity.a.63 Privileges.A.65 Obligations of the holder Anne I (Part-) Section A Subpart H - CERTIFICATES OF AIRWORTHINESS AND RESTRICTED CERTIFICATES OF AIRWORTHINESS.A.7 Scope.A.7 Eligibility.A.73 Classification.A.74 Application.A.75 Language.A.77 Amendment or modification.a.79 Transferability and reissuance within Member States.A.80 Inspections.A.8 Duration and continued validity.a.8 Aircraft identification Anne I (Part-) Section A Subpart I - NOISE CERTIFICATES.A.0 Scope.A.03 Eligibility.A.04 Application.A.07 Amendment or modification.a.09 Transferability and reissuance within Member States.A.0 Inspections.A. Duration and continued validity Anne I (Part-) Section A Subpart J - DESIGN ORGANISATION APPROVAL.A.3 Scope.A.33 Eligibility.A.34 Application.A.35 Issue of design organisation approval.a.39 Design assurance system.a.43 Data.A.45 Approval requirements.a.47 Changes in design assurance system.a.49 Transferability.A.5 Terms of approval.a.53 Changes to the terms of approval.a.57 Investigations.A.58 Findings.A.59 Duration and continued validity Page 3 of 6
.A.63 Privileges.A.65 Obligations of the holder Anne I (Part-) Section A Subpart K - PARTS AND APPLIANCES.A.30 Scope.A.303 Compliance with applicable requirements.a.305 Approval of parts and appliances.a.307 Release of parts and appliances for installation Anne I (Part-) Section A Subpart M - REPAIRS.A.43A Scope.A.43B Standard repairs.a.43a Eligibility.A.43B Demonstration of capability.a.433 Repair design.a.435 Classification of repairs.a.437 Issue of a repair design approval.a.439 Production of repair parts.a.44 Repair embodiment.a.443 Limitations.A.445 Unrepaired damage.a.447 Record-keeping.A.449 Instructions for continued airworthiness.a.45 Obligations and EPA marking Anne I (Part-) Section A Subpart O - EUROPEAN TECHNICAL STANDARD ORDER AUTHORISATIONS.A.60 Scope.A.60A Eligibility.A.60B Demonstration of capability.a.603 Application.A.604 ETSO Authorisation for an Auiliary Power Unit (APU).A.605 Data requirements.a.606 Issue of ETSO authorisation.a.607 ETSO authorisation privileges.a.608 Declaration of design and performance (DDP).A.609 Obligations of holders of ETSO authorisations.a.60 Approval for deviation.a.6 Design changes.a.63 Record-keeping.A.65 Inspection by the Agency.A.69 Duration and continued validity.a.6 Transferability Anne I (Part-) Section A Subpart P PERMIT TO FLY.A.70 Scope.A.703 Eligibility.A.705 Competent authority.a.707 Application for permit to fly.a.708 Flight conditions.a.709 Application for approval of flight conditions.a.70 Approval of flight conditions.a.7 Issue of a permit to fly.a.73 Changes.A.75 Language.A.79 Transferability.A.7 Inspections.A.73 Duration and continued validity.a.75 Renewal of permit to fly.a.77 Obligations of the holder of a permit to fly.a.79 Record-keeping Page 4 of 6
Anne I (Part-) Section A Subpart Q IDENTIFICATION OF PRODUCTS, PARTS AND APPLIANCES.A.80 Identification of products.a.803 Handling of identification data.a.804 Identification of parts and appliances.a.805 Identification of critical parts.a.807 Identification of ETSO articles Anne I ( Part-) Section B PROCEDURES FOR COMPETENT AUTHORITIES Anne I (Part-) Section B Subpart A GENERAL PROVISIONS.B.5 Scope.B.0 Obligations of the competent authority.b.5 Requirements for the organisation of the competent authority.b.30 Documented procedures.b.35 Changes in organisation and procedures.b.40 Resolution of disputes.b.45 Reporting/coordination.B.55 Record-keeping.B.60 Airworthiness directives Anne I (Part-) Section B Subpart F PRODUCTION WITHOUT PRODUCTION ORGANISATION APPROVAL.B.0 Investigation.B.5 Findings.B.30 Issue of letter of agreement.b.35 Maintenance of the letter of agreement.b.40 Amendment of a letter of agreement.b.45 Limitation, suspension and revocation of a letter of agreement.b.50 Record-keeping Anne I (Part-) Section B Subpart G PRODUCTION ORGANISATION APPROVAL.B.0 Investigation.B.5 Findings.B.30 Issue of certificate.b.35 Continued surveillance.b.40 Amendment of a production organisation approval.b.45 Suspension and revocation of a production organisation approval.b.60 Record-keeping Anne I (Part-) Section B Subpart H CERTIFICATES OF AIRWORTHINESS AND RESTRICTED CERTIFICATES OF AIRWORTHINESS.B.30 Investigation.B.35 Issue of airworthiness certificate.b.36 Certificate of airworthiness.b.37 Restricted certificate of airworthiness.b.330 Suspension and revocation of certificates of airworthiness and restricted certificates of airworthiness.b.345 Record-keeping Anne I (Part-) Section B Subpart I NOISE CERTIFICATES.B.40 Investigation.B.45 Issue of noise certificates.b.430 Suspension and revocation of a noise certificate.b.445 Record-keeping Anne I (Part-) Section B Subpart P PERMIT TO FLY.B.50 Investigation.B.55 Issue of permits to fly.b.530 Revocation of permits to fly.b.545 Record-keeping Anne I (Part-) Appendices 0 Appendi I EASA Form Authorised Release Certificate 6 Page 5 of 6
Appendi II EASA Form 5a Airworthiness Review Certificate Appendi III EASA Form 0a Permit to Fly Appendi IV EASA Form 0b Permit to Fly (issued by approved organisations) Appendi V EASA Form 4 Restricted Certificate of Airworthiness Appendi VI EASA Form 5 Certificate of Airworthiness Appendi VII EASA Form 45 Noise Certificate Appendi VIII - EASA Form 5 Aircraft Statement of Conformity Appendi IX EASA Form 53 Certificate of Release to Service Appendi X EASA Form 55 Production Organisation Approval Certificate Appendi XI EASA Form 65 Letter of Agreement for production without production organisation approval TOTAL 3 X random number of questions in the scope of lower level sum Approved by: Head of Technical Training Sandro Fabbrini [Signature] Page 6 of 6