Fisher Engineering P.O. Box 529 Rockland, Maine 04841 21442 August 23, 1999 No. 21808 Blades and A-Frame Parts Lists and Diagrams Table Of Contents 8-1/2' EZ- Blade... 2 8-1/2' Blade and A-Frame Parts List...3 9-1/2' EZ- Blade... 4 9-1/2' Blade and A-Frame Parts List...5 A-Frame Assembly w/ Blade Stop Kit...6 Removable Spring Assembly...6 EZ- Blades and A-Frame Parts List 8-1/2 EZ- Snowplow - 21442 Part # Qty Req Description * 1 EZ- Snowplow Blade, 8-1/2 21874-2 1 A-Frame Assembly * available as part of service kit only 9-1/2 EZ- Snowplow - Part # Qty Req Description * 1 EZ- Snowplow Blade, 9-1/2 21874-2 1 A-Frame Assembly 26634 1 Blade Stop Kit * available as part of service kit only
A5108** Flexible Blade Guide 8-1/2' EZ- Blade Assembly 21569 Blade Half - DS 21763 Plow Mount/ Remove Label - DS 21001** (bolted A-Frame) or 21873** (welded A-Frame) Center Deflector DC4880 Ear 21793 Warning/ Caution label 7 8 21570 Blade Half -PS 21564 (DS) 21053** Rubber Flap 21054** Backing Plate 21452 Removable Spring Assembly 6 26523 Shoe Assembly - 6" Solid Cast 5 9 10 21565 (PS) ** Packed in 8440 common attachment kit August 23, 1999 2 No. 21808
21442 Parts List Ref # Part # Qty Description Ref # Part # Qty Description - 21569 1 Blade Half DS - 90352 2 3/8-16 Locknut - 21570 1 Blade Half PS 5 307 10 Shoe Spacer - 21565 1 PS 6 308K 2 Shoe Pin - 21564 1 DS 7 90353 4 7/16-14 Locknut - 26523* 2 Shoe Assembly - 6" Solid Cast 8 91003 4 7/16-14 Shoulder Bolt Gr. 5-21452 4 Removable Spring Assembly 9 5523K 8 3/4" x 2-3/16" Machine Pin - 21763 1 Plow Mount/Remove Label DS 10 90658 8 5/32" x 1-1/4" Cotter Pin ZP - 21793 1 Warning/Caution Label PS ns 21608 1 Single -Plow Cutting Edge w/ - 22157 1 Stop Assembly Hardware (optional) - 22154 3 Rubber Spacer Plate ns 21609 2 -plow Cutting Edge w/hardware Set of 2 (optional) - 98011 2 3/8-16 Full Thread Gr. 5 Cap Screw ns = not shown * Consists of (1) shoe, (1) 308K shoe pin, and (5) 307 shoe spacers No. 21808 3 August 23, 1999
9-1/2' EZ- Blade Assembly A5108** Flexible Blade Guide 26599 Blade Half - DS 21763 Plow Mount/ Remove Label - DS 21001** (bolted A-Frame) or 21873** (welded A-Frame) Center Deflector 21793 Warning/ Caution label 7 8 26597 (DS) 26575** Rubber Flap 26600 Blade Half -PS 21054** Backing Plate 21452 Removable Spring Assembly 6 26523 Shoe Assembly - 6" Solid Cast 5 9 10 DC4880 Ear 26598 (PS) August 23, 1999 4 No. 21808
Parts List Ref # Part # Qty Description Ref # Part # Qty Description - 26599 1 Blade Half DS - 90352 2 3/8-16 Locknut - 26600 1 Blade Half PS 5 307 10 Shoe Spacer - 26598 1 PS 6 308K 2 Shoe Pin - 26597 1 DS 7 90353 4 7/16-14 Locknut - 26523* 2 Shoe Assembly - 6" Solid Cast 8 91003 4 7/16-14 Shoulder Bolt Gr. 5-21452 4 Removable Spring Assembly 9 5523K 8 3/4" x 2-3/16" Machine Pin - 21763 1 Plow Mount/Remove Label DS 10 90658 8 5/32" x 1-1/4" Cotter Pin ZP - 21793 1 Warning/Caution Label PS ns 26595 1 Single -Plow Cutting Edge w/ - 22157 1 Stop Assembly Hardware (optional) - 22154 3 Rubber Spacer Plate ns 26593 2 -plow Cutting Edge w/hardware Set of 2 (optional) - 98011 2 3/8-16 Full Thread Gr. 5 Cap Screw - 26634 1 EZ- Snowplow Blade Stop Kit ns = not shown * Consists of (1) shoe, (1) 308K shoe pin, and (5) 307 shoe spacers 26634 Blade Stop Kit (9-1/2' EZ- Snowplow Only) 90013 1/4 x 2 Cotter Pin (2 places) 26634 - EZ- Snowplow Blade Stop Kit Ref # Part # Qty Description - 6817 2 1 x 6 Pivot Pin - 90013 2 1/4 x 2 Cotter Pin ns 90210 2 1/2-13 x 1-1/2 Gr. 5 Cap Screw ns 90688 2 1/2-13 Locknut * 26648 2 3/4-10 x 2 Gr. 8 Flange Head Cap Screw * 26649 2 3/4-10 Stover Flange Nut - 26583 2 Blade Stop ns = not shown * installation of these parts described in 26631 6817 1 x 6 Pivot Pin (2 places) 26583 Blade Stop (2 places) No. 21808 5 August 23, 1999
21874-2 A-Frame Assembly 98011 3/8-16 Cap Screw 22157 Stop Assembly 22154 Rubber Spacer Plate 90352 3/8-16 Locknut A-Frame Assembly 21452 Removable Spring Bar Assembly 21452 Removable Spring Bar Assembly 21450 Removable Spring Bar 20181 1/4" x 1-1/4" Pin 20191 Removable Spring Disc 5323 Trip Spring Copyright 1999 Douglas Dynamics. L.L.C. All rights reserved. This material may not be reproduced or copied, in whole or in part, in any printed, mechanical, electronic, film or other distribution and storage media, without the written consent of Fisher Engineering. Authorization to photocopy items for internal or personal use by Fisher Engineering outlets is granted. Fisher Engineering reserves the right under its product improvement policy to change construction or design details and furnish equipment when so altered without reference to illustrations or specifications used herein. Fisher Engineering and the vehicle manufacturer may require and/or recommend optional equipment for snow removal. Fisher Engineering offers a limited warranty for all snowplows and accessories. See separately printed page for this important information. The following are registered ( ) trademarks of Douglas Dynamics, L.L.C.: EZ-, FISHER Printed in USA August 23, 1999 6 No. 21808