REVISION TRANSMITTAL This sheet transmits Revision 1 to, which: A. Moves the CM2987-3 ID Tags from the -0 Parts Kit to the -1 Parts Kit. B. Adds EASA approval statement to the Approval section. C. Adds a note to the Flight Crew Summary that the XM graphical weather display on the Primus Elite Display s currently does not include METAR s (Meteorological Terminal Aviation Routine Weather Report) and TAF s (Terminal Aerodrome Forecast). D. Makes minor editorial corrections throughout the document. NOTE: This revision replaces the original issue of. REVISION COMPLIANCE NO EFFECT. Airplanes previously modified by this service bulletin are not effected by this revision. LOG OF REVISIONS Original Issue November 8, 2011 Revision 1 January 30, 2012 Original Issue - November 8, 2011 Revision 1 - January 30, 2012 Page 1 of 1 Cessna Aircraft Company, Cessna Customer Service, P.O. Box 7706, Wichita, KS 67277, U.S.A. 1-316-517-5800, Fax 1-316-517-7271, Email: customercare@cessna.textron.com COPYRIGHT 2011
TITLE NAVIGATION - XM GRAPHICAL WEATHER UPGRADE EFFECTIVITY MODEL SERIAL NUMBERS 750 (Citation X) -0001 thru -0306 The equivalent of this service bulletin has been incorporated on production airplanes -0307 and On. NOTE: Cessna-owned Citation Service Centers are the only facilities that can complete this service bulletin. NOTE: Make sure that you have the applicable flight manual supplements for your airplane prior to accomplishing this service bulletin. (Refer to the REFERENCES section for a list of flight manual supplements.) NOTE: SB750-34-55, Navigation - Honeywell Primus Elite Upgrade must be installed before or at the same time as this service bulletin. The owner/operator will realize a cost benefit if they choose to incorporate this service bulletin at the same time as SB750-34-55, Navigation - Honeywell Primus Elite Upgrade. The incorporation of this service bulletin is still at the owners discretion. NOTE: The subscription for the XM Graphical Weather will need to be set up prior to the operational test of this service bulletin. It is advisable that the subscription be set up prior to the start of this service bulletin. REASON To provide XM graphical weather to be displayed in the cockpit on the MFD's. DESCRIPTION This service bulletin provides parts and references to the engineering drawings necessary to install the XM graphical weather upgrade. Original Issue - November 8, 2011 Revision 1 - January 30, 2012 Page 1 of 6 Cessna Aircraft Company, Cessna Customer Service, P.O. Box 7706, Wichita, KS 67277, U.S.A. 1-316-517-5800, Fax 1-316-517-7271, Email: customercare@cessna.textron.com COPYRIGHT 2011
COMPLIANCE OPTIONAL. This service bulletin can be accomplished at the discretion of the owner. A service bulletin published by Cessna Aircraft Company may be recorded as completed in an aircraft log only when the following requirements are satisfied: 1) The mechanic must complete all of the instructions in the service bulletin, including the intent therein. 2) The mechanic must correctly use and install all applicable parts supplied with the service bulletin kit. Only with written authorization from Cessna Aircraft Company can substitute parts or rebuilt parts be used to replace new parts. 3) The mechanic or airplane owner must use the technical data in the service bulletin only as approved and published. 4) The mechanic or airplane owner must apply the information in the service bulletin only to aircraft serial numbers identified in the Effectivity section of the bulletin. 5) The mechanic or airplane owner must use maintenance practices that are identified as acceptable standard practices in the aviation industry and governmental regulations. No individual or corporate organization other than Cessna Aircraft Company is authorized to make or apply any changes to a Cessna-issued service bulletin, service letter, or flight manual supplement without prior written consent from Cessna Aircraft Company. Cessna Aircraft Company is not responsible for the quality of maintenance performed to comply with this document, unless the maintenance is accomplished at a Cessna-owned Citation Service Center. APPROVAL Cessna received FAA approval for the technical data in this publication that changes the airplane type design. Cessna received EASA approval for the technical data in this publication that changes the airplane type design. FLIGHT CREW OPERATIONS Refer to the attached Flight Crew Operations Summary. CONSUMABLE MATERIAL You must use the consumable materials that follow, or their equivalent, to complete this service bulletin. NAME NUMBER MANUFACTURER USE Corrosion Resistant Primer Color Chemical Film Treatment Adhesive K000925 U074093 U074031S, Type I, Class A (RTV-732 White) Sealant U470642 Type I, Class B2 (6 ounce Simkit) Sealant Cessna Service Parts & Programs 7121 Southwest Boulevard Wichita, KS 67215 Cessna Service Parts & Programs 7121 Southwest Boulevard Wichita, KS 67215 Cessna Service Parts & Programs 7121 Southwest Boulevard Wichita, KS 67215 Cessna Service Parts & Programs 7121 Southwest Boulevard Wichita, KS 67215 Type I, Class C20 PRC-DeSoto International 5454 San Fernando Road Glendale, CA 91209 To protect against corrosion and prepare surface for final finish. To prepare aluminum surface for intermediate primer. To seal the antenna screws to prevent water infiltration. For sealing applications. For fay sealing applications. Page 2 Revision 1 - January 30, 2012
WEIGHT AND BALANCE INFORMATION MODEL WEIGHT CHANGE RESULTANT MOMENT MOMENT/100 + 5.60 pounds + 1177.23 inch-pounds + 11.77 inch-pounds 4092743-901 (XM Receiver) + 1.50 pounds + 160.91 inch-pounds + 1.61 inch-pounds REFERENCES Cessna Model 750 Citation X Maintenance Manual Cessna Model 750 Citation X Wiring Diagram Manual XM Weather System ICA Supplement, Supplement NO: ICA-750-23-00005 Cessna Model 750 Airplane Flight Manual Supplement 40, Original issue or later, Digital Nav Charts and XM Weather (Airplanes -0173 thru -0500 and Airplanes Incorporating SB750-71-10) Cessna Model 750 Airplane Flight Manual Supplement 46, Original issue or later, Digital Nav Charts and XM Weather (Airplanes -0001 thru -0172 Not Incorporating SB750-71-10) NOTE: To install on your airplane, you must get the engineering documents that follow. You must use the most recent revision and all of the applicable drawing change notices (DCN) for each engineering document. NOTE: SB750-34-55, Navigation - Honeywell Primus Elite Upgrade must be installed before or at the same time as this service bulletin. DOCUMENT NUMBER TITLE 9590026 XM Receiver Mod 9511303 Cable Assembly, XM Weather 9524009 Antenna Inst - XM Sat PUBLICATIONS AFFECTED Cessna Model 750 Citation X Maintenance Manual Cessna Model 750 Citation X Illustrated Parts Catalog Cessna Model 750 Citation X Wiring Diagram Manual ACCOMPLISHMENT INSTRUCTIONS 1. Make sure the subscription for the XM Graphical Weather is set up or will be set up before the operational check of this service bulletin. NOTE: The operational check of the XM Graphical Weather can not be completed without a subscription for XM Graphical Weather. 2. Prepare the airplane for maintenance. A. Make sure that all switches are in the OFF/NORM position. B. Disconnect electrical power from the airplane. (1) Disconnect the airplane batteries. (2) Disconnect external electrical power. C. Attach maintenance warning tags to the batteries and external power receptacle that have "DO NOT CONNECT ELECTRICAL POWER - MAINTENANCE IN PROGRESS" writtenonthem. Revision 1 - January 30, 2012 Page 3
3. Remove the interior seats, upholstery, equipment and access panels as necessary to complete this modification. (Refer To The Model 750 Maintenance Manual and the Model 750 Interior Maintenance Manual And Illustrated Parts Catalog.) NOTE: This service bulletin does not contain step by step instructions to install the XM graphical weather upgrade. The mechanic must use the engineering drawings and best shop practices to make sure proper installation of the parts and equipment. The modification steps can be accomplished in the order of precedence based on the mechanic preference. 4. Do the modification for the XM graphical weather receiver installation. (Refer to engineering drawing 9590026.) 5. Do the wiring modification for the XM graphical weather. (Refer to engineering drawing 9511303.) 6. Do the wiring modification for the XM Antenna installation. (Refer to engineering drawing 9524009.) 7. Install the interior seats, upholstery, equipment and access panels that were removed to complete this modification. (Refer To The Model 750 Maintenance Manual and the Model 750 Interior Maintenance Manual and Illustrated Parts Catalog.) 8. Make sure all maintenance warning tags are removed from the batteries and external power receptacle. 9. Connect the airplane batteries. 10. Do the operational check of all equipment that was removed and/or installed. (Refer to the Model 750 Maintenance Manual and engineering drawings as necessary.) A. Do the Testing, Return to Service for the XM Weather System. (Refer to the Model 750, XM Weather System ICA Supplement, ICA-750-23-00005, Section 6 Testing, Return to Service and Troubleshooting.) 11. Disconnect external electrical power. 12. Make sure that Cessna Model 750 Airplane Flight Manual, Supplements are inserted in the airplane flight manual. Cessna Model 750 Airplane Flight Manual Supplement 40, Original issue or later, Digital Nav Charts and XM Weather (Airplanes -0173 thru -0500 and Airplanes Incorporating SB750-71-10) Cessna Model 750 Airplane Flight Manual Supplement 46, Original issue or later, Digital Nav Charts and XM Weather (Airplanes -0001 thru -0172 Not Incorporating SB750-71-10) NOTE: You can contact Citation Technical Publications at 1-316-517-5800 for the Cessna Model 750 Airplane Flight Manual, Supplements. 13. Make sure the flight crew receives the Flight Crew Operations Summary, which shows the operational changes that are a result of the accomplishment of this service bulletin. 14. Record that this service bulletin has been completed. A. Complete a Maintenance Transaction Report. B. Put a copy of the completed Maintenance Transaction Report in the airplane logbook. C. Send a copy of the completed Maintenance Transaction Report to: CESCOM C/O Camp Systems International, 8200 East 34th Street North, Building 1600 Suite 1607 Wichita, KS 67226. Page 4 Revision 1 - January 30, 2012
MATERIAL INFORMATION Order the kit below to install this modification. NOTE: All driven rivets necessary to accomplish this service bulletin have been excluded from the material information section and will be installed at the Service Center. NEW P/N QUAN- TITY KEY WORD OLD P/N INSTRUCTIONS/ DISPOSITION/REF- DESIGNATION -0 1 Hardware Kit, CONSISTING OF THE FOLLOWING PARTS: D20419-21 2 Screw Lock None PF808 MS27039C0811 4 Screw None N/A MS27039-0807 4 Screw None N/A M24308/2-4F 1 Receptacle None PF808 M85049/48-2-4 1 Strain Relief None PF808 S1370-1 3 Splice None N/A S2031-2 4 Nutplate None N/A S2906-4-3 4 Rivet None N/A (XM Mod) S2974N2 2 Shielded Termination (without None N/A lead) S2974-7 3 Shielded Termination (with None N/A lead) S3529-1A1 2 Anchor Assembly None N/A XMRANT-01 1 XM Antenna None N/A 9524009-2 1 Doubler None N/A 9524010-2 1 Zee Assembly None N/A (XM Mod) 9524010-4 1 Zee Assembly None N/A (XM Mod) 1 Instructions N/A N/A Revision 1 - January 30, 2012 Page 5
NOTE: In addition to the -0 Kiit, the -1 kit that follows will be required to install this service bulletin. NEW P/N QUAN- TITY KEY WORD OLD P/N INSTRUCTIONS/ DISPOSITION/REF- DESIGNATION -1 1 Wire Kit, CONSISTING OF THE FOLLOWING PARTS: CM2987-3 1 ID Tag marked CGS18 None CGS18 CM2987-3 1 ID Tag marked PI435A None PI435A CM2987-3 1 ID Tag marked PF808 None PF808 CM2987-3 1 ID Tag marked PF902 None PF902 CM2987-3 1 ID Tag marked PI434A None PI434A M27500-22ML2T08 78 Inches Electrical Wire marked A8PI434A-A8PI435A (WHT) B8PI434A-B8PI435A (BLU) None PI434A/PI435A M27500-22ML2T08 90 Inches Electrical Wire marked 15PF808-A8PI434A (WHT) 33PF808-B8PI434A (BLU) M81044/12-22-9 108 Inches Electrical Wire marked 19PF808-*BPF902 M81044/12-22-9 96 Inches Electrical Wire marked 37PF808-CGS18 M81044/12-22-9 108 Inches Electrical Wire marked 18PF808-*BPF902 9555100-158 1 Coaxial Cable Assembly (XM Antenna) None None None None None PF808/PI434A PF808/PF902 PF808/CGS18 PF808/PF902 ZC508 NOTE: In addition to the -0 and -1 Kits, the part that follow will be required to install this service bulletin. NEW P/N QUANTITY KEY WORD OLD P/N INSTRUCTIONS/ DISPOSITION 4092743-901 1 XM Receiver None N/A Page 6 Revision 1 - January 30, 2012
ATTACHMENT FLIGHT CREW OPERATIONS SUMMARY This summary provides additional information for the flight crew regarding operational changes as a result of accomplishment of this service bulletin. Please remove this summary from the service bulletin and give it to the flight crew. This summary is informational only and does not supersede any information in the FAA-approved airplane flight manual. The XM graphical weather display on the Primus Elite Displays the crew access to the following weather products: ADVISORIES Airmets Sigmets FORECASTS Turbulence Winds OBSERVATIONS NexRad Storm Tops Lightning INFORMATION TFRs NOTE: Weather products are accessed via a menu system using the new JST100-01 Joystick Controllers. NOTE: The XM graphical weather display on the Primus Elite Display s currently does not include METAR s (Meteorological Terminal Aviation Routine Weather Report) and TAF s (Terminal Aerodrome Forecast).
OWNER ADVISORY TITLE NAVIGATION - XM GRAPHICAL WEATHER UPGRADE TO: Cessna Aircraft Owner REASON To provide XM graphical weather to be displayed in the cockpit on the MFD's. COMPLIANCE OPTIONAL. This service bulletin can be accomplished at the discretion of the owner. LABOR HOURS WORK PHASE Modification MAN-HOURS As Required MATERIAL AVAILABILITY PART NUMBER AVAILABILITY COST -0 * * -1 * * 4092743-901 * * * Please contact Cessna Service Parts & Programs for current cost and availability of parts listed in this service bulletin. Phone at 1-800-835-4000 (Domestic) or 1-316-517-7542 (International). Send email to: citationparts@cessna.textron.com or telefax at 1-316-517-7711. Based on availability and lead times, parts may require advanced scheduling. In cases where the required part(s) are available as exchange, order the exchange part and, upon completion, expedite the return of the removed core to avoid return penalties. Contact the Cessna Service Parts & Programs Sales Desk for availability of exchange parts. January 30, 2012 Page1of1 Cessna Aircraft Company, Cessna Customer Service, P.O. Box 7706, Wichita, KS 67277, U.S.A. 1-316-517-5800, Fax 1-316-517-7271, Email: customercare@cessna.textron.com COPYRIGHT 2012