New Product Range 1181 Weather and Energy Fire and Smoke Noise - Acoustic ealth and Aged Care Light Insect - Vermin www.ravensealing.com
Content Silicon Raindrop Seal RP700 Series RP700 3 RP710 3 RP720 3 Brush Strip Seals RP51F 4 Astragals Meeting Stile Seals for Frameless Glass RP43Si 5 RP105 5 Intumescent Fire Seals RP135Si 6 RP136F 7 RP160 7
Silicon Raindrop Seal RP700 Series Newly introduced Raven raindrop seal can be used in all door and window systems that require a premium quality, low closing force compression seal. Raven raindrop seal can also be used in aluminium and PVC proprietary systems where dimensions suit. Raven raindrop seal is manufactured from silicon which is flame resistant and self-extinguishing. By the virtual elimination of compression set distortion (-60 C to +200 C), Raven raindrop seal increases life cycle sealing performance over traditional, plastic covered foam strips that may become hard and brittle. Raven raindrop seal has exceptional abrasion qualities that include improved resistance to UV, biological and chemical deterioration. Importantly, Raven raindrop seal offers improvements in air and rain infiltration performance, particularly where lower closing forces are required to meet new building regulations for energy efficiency and acoustic performance or where access and mobility is important. C RP700 Weather AUS/NZ: NCC various sections. AS2047, AS4055, AS4420 Pt. 0 to 5 & AS/NZS 1170. UK/EU: Approved Document L1 & L2. Tests above are similar to BS 5368 & BS 7386. Location: Aluminium, PVC or timber door and window frame where dimensions suit. Compression: 4mm to 5mm. Finish: Brown or black. Fixing: Self Adhesive. Note: Contact surface must be clean, smooth and if painted, well cured. 14 8 Sizes: 54m reel (3 x 18m). : Weather & Energy. RP710 RP720 Location: Aluminium, PVC or timber door and window frame where dimensions suit. Compression: 3mm to 4mm. 12 6 Location: Aluminium, PVC or timber door and window frame where dimensions suit. Compression: 2mm to 3mm. 10 4 Finish: Brown or black. Finish: Brown or black. Fixing: Self Adhesive. Note: Contact surface must be clean, smooth and if painted, well cured. Fixing: Self Adhesive. Note: Contact surface must be clean, smooth and if painted, well cured. Sizes: 54m reel (3 x 18m). Sizes: 54m reel (3 x 18m). : Weather & Energy. : Weather & Energy. 3
Brush Strip Seals The versatility of Raven brush strip seals and ease of installation makes them particularly suitable for sealing difficult applications such as sliding, revolving, pivot, roll-up and panel lift doors. Suitable for protection against smoke, draughts, light, dust, insects, bushfire embers and for energy retention, Raven nylon brush strips are ideal for heavy duty applications with tests proving minimal wear occurs over prolonged use. Dense black nylon bristles are locked into a galvanised steel spine which is often fitted into an anodised aluminium holder. Raven brush strips are also available without the aluminium holders. Specify for example RP57 (brush only). Adhesive tape is standard on most holders for ease of installation. Raven use special nylon filament due to its significantly superior performance over inferior materials such as polypropylene. Withstanding temperatures up to 200ºC for 30 minutes, Raven brush strips are self-extinguishing and can be used as a bushfire ember seal, up to BAL FZ for garage doors. Product selection should be made when assessing the mandated requirements of the NCC and Australian Bushfire Standard AS 3959. RP51F 13 18 C M200 C 6 A nylon brush strip door frame seal that is ideal for automatic sliding doors. The brush houses a unique medium temperature fin which is effective in the sealing of medium temperature smoke, noise and weather. Meet the deemed to satisfy Spec C3.4 fir smoke doors. Location: ead and jambs of automatic sliding doors. Min/Max Gap: Up to 13mm (user determined). Finish: Aluminium anodised. Satin clear (Silver) finish. PE paint (two pack Polyester Enamel). Fixing: Zinc plated, cross recess head S.T. screws of the appropriate size are supplied. Seal: RP52F. Fine dense, black nylon filaments, UV stabilized and medium temperature fin. Galvanised steel spine. Size: 1250, 3000mm. Smoke AS1530.7 & EN 1634-3. 4
Astragals Meeting Stile Seals for Frameless Glass RP43Si C M200 C 30-50 A silicon smoke seal specifically designed for frameless & metal framed glazed stacked sliding doors. The silicon fin forms an effective weather, energy, ambient and medium temperature smoke seal. 10 4 22 Two pieces of RP43Si are used to make the seal. Location: Between panels of frameless & metal framed glazed sliding doors. Min/Max Gap: 30mm to 50mm. Finish: Satin clear (silver) anodised aluminium (15µm). Fixing: Adhesive double sided tape. Seal: Light grey silicon rubber (SE). Size: 3000mm. RP105 C A weather and energy seal specifically designed for frameless & metal framed glazed stacked sliding doors. The polymer fin forms an effective weather and energy seal. 10 15 15-28 Two pieces of RP105 are used to make the seal. Location: Between panels of frameless & metal framed glazed sliding doors. Min/Max Gap: 15mm to 28mm (prior to installation). Fixing: Adhesive double sided tape. Seal: Clear polymer seal. Size: 3000mm. 5
Intumescent Fire Seals TIME IN MINUTES Furnace Temperature / Time Curve 360 330 300 270 240 210 180 150 120 90 60 30 0 100 200 300 Intumescent Expansion 750 C Fully expanded 500 C Vigorous expansion 250 C Expansion 180 C Initial Expansion 0 80 C Initial softening TEMPERATURE C 400 500 600 700 800 900 1000 1100 1200 1300 Raven has a large range of intumescent seals to suit the OEM and retrofit aftermarket. Intumescent seals are predominantly used in door assemblies manufactured by fire door manufacturers where they incorporate Raven sealing systems into the door set prior to leaving the factory. Used in fire door assemblies of timber, steel or composite construction, Raven intumescent expands rapidly to many times its original size upon contact with fire. It concentrates high pressure in confined spaces, exfoliates slowly to protect itself once activated and has good insulation properties. When correctly positioned in the door leaf or door frame margin, the seals expand when activated to prevent the passage of flames, hot smoke and fumes from one compartment to another. Unlike sodium silicate based material, Raven s unique intumescent is unaffected by water making them ideal for application in damp or humid environments. The intumescent is clean, non-toxic and displays outstanding durability and reliability. RP135Si C M200 C A medium temperature & hot smoke perimeter seal with a silicon sealing fin specifically designed for pivot doors. A sealing system that meets the deemed to satisfy specification of BCA C3.4 (tested to AS1530.7 and EN1634-3) which meets the smoke leakage requirements of AS 6905 and equivalent to Sa & Sm BS EN 13501-2 when fitted on tested smoke doors. RP130Si may also be fitted to the edge of the doors. Location: Perimeter of pivot doors. Min/Max Gap: 14mm to 18mm. Finish: Satin clear (silver) anodised aluminium (15µm). Fixing: Screw fix. Zinc plated, cross recess head S.T. screws suppled. Seal: RP3129Si. Light grey silicon rubber (SE). Size: Available in stock lengths. 18 7 38 6
RP136F C M200 C 38 A heavy duty medium temperature & hot smoke door bottom seal. The seal is achieved by a pair of nylon brush strips with a medium temperature smoke fin. The seal can be checked out or drilled to accommodate the pivot, thereby providing a continuous seal. Tested to AS1530.7 and EN1634-3 which meets the smoke leakage requirements of AS6905 and equivalent to Sa & Sm BS EN 13501-2 when fitted on tested smoke doors. Location: Door bottom of butt hinged and pivot doors. Min/Max Gap: 15mm to 18mm. Finish: Satin clear (silver) anodised aluminium (15µm). Fixing: Screw fix. Zinc plated, cross recess head S.T. screws suppled. Seal: RP52F. Black fine and dense nylon filaments, UV stabilised medium temperature smoke barrier fin and galvanised steel spine. Size: Available in stock lengths. 18 7 RP160 M C M200 C RP160 is an intumescent seal in a co-extruded PVC holder. Discreetly located in the protected corners of rebated timber or steel door frames. RP160 is suitable for new and retrofit applications. Smoke AS1530.7 & EN 1634-3 8 21 Location: Around rebated frames of single and double butt hinged doors. Min/Max Gap: 2.5mm to 7mm. Seal: Black or white co-extruded rigid and flexible fin retardant PVC with intumescent infill. Fixing: Self adhesive. Size: Available in stock lengths. 7
Raven Products Pty. Ltd. ead Office and Factory 18-22 Aldershot Road Lonsdale, South Australia 5160 Australia PO Box 67 Lonsdale, South Australia 5160 Australia T +61 8 8384 5455 F +61 8 8382 8885 E sales@raven.com.au www.ravensealing.com ong Kong & China Rm 3107-09, 31/F, Trendy Centre, 682-684 Castle Peak Road, Lai Chi Kok, Kowloon, K T +852 2987 6257 +86 400 0350066 F +852 2987 6131 E sales@ravensealing.com Singapore 2 Changi Business Park Ave 1, #02-02 Park Avenue Changi, Singapore 486015 T +65 6543 6810 F +65 6543 6811 E sales.sg@ravensealing.com