Technical data Patio awnings Valid from 01.03.2017
WAREMA patio awnings for individual sun protection WAREMA awnings are an eye-catching feature for any building. The large choice of designs, colours and fabrics make any individual solution possible. Whether it is the model of a cassette awning, an open or half-closed articulated arm awning design your awning according to your requirements. And when it comes to operation you also have the choice: from manual operation through to an exclusive comfort control. 2
100% quality WAREMA stands for quality. We rely on high-grade materials and first-class processing. Authorised, extensively trained WAREMA dealers offer individual advice and will develop the best solution for your requirements and wishes together with you. Qualified advice, competent planning, reliable mounting and customer-oriented service services that you can rely on from your WAREMA dealer. 3
Perfect atmosphere Integrated lighting Your benefits: Longer summer evenings outside with a pleasant atmosphere Pleasant, warm light through the use of LED lamps Low energy consumption thanks to LED technology The light can be dimmed in steps using the WMS dimmer (LED) Comfortable operation with the WMS hand-held transmitter or by smartphone using WMS WebControl LED stripes in the front profile and cassette LED stripes in the front profile 4
Cassette awning Type 580 The WAREMA 580 cassette awning leaves nothing to be desired. It offers delicate sun shading for medium-sized patios and balconies. In case of the installation of patio awnings on open areas, the patio frame offers perfect shading solution. Your benefits: Modern design with many designoptions Sophisticated functionality down to the last detail The cassette reliably protects the fabric against dirt and weather influences Brilliant accessories (optional): LED or halogen light rail, radiant heater, valance, valance roller blind, patio side screen, patio frame Technical details Accessories: patio frame Max. width (mm) 5500 Max. projection (mm) 3000 Max. inclination angle (degree) 40 Operation Crank optional Motor standard Radio motor optional Solar drive optional Fabric bearing shell standard Recommended control WMS wind sensor Standard colours 2 WAREMA Colour World optional 8
Description 1 2 3 5.2 5.3 5.1 4 8 7 6 5.4 580v1 fig. 87: 1 Cassette 2 Fabric shaft 3 Console 4 Side covers 5 Articulated arm 5.1 Articulated arm seat 5.2 Articulated arm profile 5.3 Centre joint 5.4 Front rail seat 6 Front rail 7 Fabric 8 Valance (optional) Application Compact sun shading for shading balconies and patios. Mounting independent of weather as awning fabric and articulated arms are protected from rain and dirt in a small cassette. Available with valance roller blind as an option. Operation Basic motor, 230 V, 50 Hz Orea WT with electronic limit switch-off (optionally with EWFS/WMS Plug receiver) EWFS radio motor, 230 V, 50 Hz (optionally) W-MM with electronic limit switch-off WMS radio motor, 230 V, 50 Hz (optionally) WMS-MM with electronic limit switch-off More information about drives from page 309. Crank Bevel gear with integrated limit stop Ratio: 3:1 Crank lengths: 800/1000/1200/1400/1600/1800/ 2000 mm Cassette (1) Bottom profile with moulded-on fabric bearing shell and top profile Material: aluminium, extruded Dimensions (WxH): 226 x 129 mm Profile: rounded The front closure is a front rail adapted to the cassette shape. Fabric shaft (2) Material: steel, galvanised Material thickness: 1 mm Dimensions (Ø): 78 mm Profile: groove tube plain Console (3) Wall and ceiling installation Material: aluminium, extruded Rafter installation Material: aluminium 68 2015942en_012.fm/03.2017
Description Overview Side covers (4) for cassette and front rail Material: cast aluminium Articulated arm (5) Articulated arm seat (5.1) Material: aluminium, permanent mould casting Articulated arm profile (5.2) Material: aluminium, extruded Dimensions (WxH): front 30 x 56 or 25 x 49 mm, depending on projection rear 35 x 67 mm or 29 x 55 mm, depending on projection Centre joint (5.3) Material: aluminium, permanent mould casting Transmission of forces: steel tension spring and flexband with integrated steel strands Front rail seat (5.4) Material: aluminium Front rail (6) Material: aluminium, extruded Dimensions (WxH): 99 x 111 mm with valance roller blind 144 x 111 mm Fabric (7) Fabric qualities: Designs: Standard/Lumera acrylic fabric Acrylic Perfora/All Weather Soltis 92 fabric More information about the fabrics on page 300 according to current WAREMA awning collection Special fabrics not included in our current awning collection are only available upon request and at a surcharge. Valance (optional) (8) The valance is individually removable and available in 3 shapes, see page 305. If a valance is ordered and no shape is stated, we will supply valance shape no. 11. Dimensions (H): approx. 95 mm Optional: valance roller blind with crank operation (motor operation not possible), see page 257. Inclination angle adjustment Continuously adjustable using spanner for hexagon nuts on cast iron part Inclination angle: 5 40 Standard: 5 inclination Resistance to water collection, class 2, from inclination angle of 25. Tolerance depending on projection ±5. Weight approx. 15 18 kg/m without consoles, depending on equipment Colours Aluminium parts with chrome-free pre-treatment in RAL 9016 or 9006, satin finish. Option of powder coating according to WAREMA Colour World. Other colour specifications and special colours are available on request at a surcharge. Accessories See page 251. You can also use our free planning programme on www.sonnenschutzplaner.de for planning your sun shading control systems here you can configure the product and create a technical drawing to be integrated into your plans. Construction limit values in mm for wall and ceiling installation on concrete/rafter installation (consoles B, E, F) Individual unit Projection 0 2000 2500 3000 Max. width Cassette awning 5500 5500 5500 5000 1) Valance roller blind 5500 5500 5500 2) Fabric types Acrylic all qualities 5500 5500 5500 5000 Soltis 92 fabric 5500 5500 5500 Min. width with crank/motor 1840 2340 2850 3340 with WMS wind sensor 1910 2410 2920 3410 1) The max. width can not be exceeded here. 2) A model with valance roller blind is not possible here for structural reasons. The minimum sizes, number of consoles, console positions and pull-out forces indicated in this document refer to concrete C20/25 (B25) as a substructure and mounting on rafters. You can find information on other substructures at konsolenplaner.warema.de. Articulated arm/ cassette awnings Pergola awnings Patio side screens Conservatory awnings Accessories Horizontal awnings Sun sails/fabrics 2015942en_012.fm/03.2017 69 Drives/control systems
Fixing options 110 30 30 KD04/0500 007 fig. 88: Console type B wall installation KD04/0500 008 fig. 89: Console type D wall installation with mounting plate 70752 148 14 38 25 68 75 40 330 25 125 125 14 40 182 35 210 285 35 KD04/05000067-3d 230 (or custom made) 100 30 fig. 91: Console type F rafter installation 72 31.5 25 14 159 117 fig. 90: Console type E ceiling installation 70 2015942en_012.fm/03.2017
Fixing options Sun sails/fabrics Horizontal awnings Accessories Patio side screens Overview Pergola awnings Articulated arm/ cassette awnings 230 230 fig. 92: Rafter installation, inclination 5 KD04/0500 001-3a Conservatory awnings fig. 93: Rafter installation with valance roller blind, inclination 5 KD04/0500 011-3a 2015942en_012.fm/03.2017 71 Drives/control systems
Mounting options 245 226 292 273 KD05/0500 001v1 fig. 94: Wall installation, inclination 5 kd05/0500 001-2v1 fig. 95: Wall installation, inclination 40 KD05/0500 001-3 38 68 38 68 129 218 129 172 183 42 182 192 kd05/0500 011-4av1 fig. 97: Wall installation with valance roller blind, inclination 5 kd05/0500 011-5av1 fig. 98: Wall installation with valance roller blind, inclination 40 77 72 269 32 kd05/0500 011-6a 38 68 129 250 232 38 209 248 261 68 77 316 72 32 183 129 204 fig. 96: Ceiling installation (front), inclination 5 fig. 99: Ceiling installation (front) with valance roller blind, inclination 5 72 2015942en_012.fm/03.2017
Mounting options Overview 242 72 32 32 72 364 Articulated arm/ cassette awnings 183 182 225 fig. 100: Ceiling installation (front), inclination 40 391 32 72 kd05/0500 001-4 182 fig. 102: Ceiling installation (rear), inclination 40 Pergola awnings Sun sails/fabrics Patio side screens Horizontal awnings 10 59 205 Conservatory awnings Accessories kd05/0500 001-6 158 fig. 101: Ceiling installation (rear), inclination 5 129 182 kd05/0500 001-5 fig. 103: 80 Cable exit 70508 2015942en_012.fm/03.2017 73 Drives/control systems
Mounting options 72 276 32 kd05/0500 011-7a 248 209 291 183 fig. 104: Ceiling installation (front) with valance roller blind, inclination 40 32 72 391 kd05/0500 011-8a fig. 105: Ceiling installation (rear) with valance roller blind, inclination 5 kd05/0500 011-9a 182 161 184 32 72 399 209 248 182 fig. 106: Ceiling installation (rear) with valance roller blind, inclination 40 74 2015942en_012.fm/03.2017
Measuring instructions Overview Wall and ceiling installation Order width Articulated arm/ cassette awnings fig. 107: Ideal position for wall and ceiling installation outer edge of consoles is outer edge of awning 95 Order width 95 kd040500004-1 Pergola awnings fig. 108: In difficult installation situations, the ideal position of each console can be shifted outwards by 95 mm. Rafter installation Order width Rafter dimension 25 25 70624 Patio side screens Conservatory awnings fig. 109: Awning width = width between the outer rafter edges + 50 mm Fixed to the outer edge kd040500004-3 Accessories Order width 10 Rafter dimension 10 fig. 110: Awning width = width between the inner rafter edges + 20 mm Fixed to the inner edge kd040500004-4 Horizontal awnings Sun sails/fabrics 2015942en_012.fm/03.2017 75 Drives/control systems
Measuring instructions Individual unit type 580 Projection (mm) Width (mm) Consoles 1) 1) The specified data are based on a concrete mounting with a pressure-resistant substructure and rafter mounting for wind resistance class 2. Data for other substructures can be found at konsolenplaner.warema.de. Individual unit with valance roller blind type 580 Force/screw anchor Force/screw (rafters) (N) up to Number Type (wall) (N) (ceiling) (N) 0 5500 2 B, E, F 1028 791 1623 2000 5500 2 B, E, F 1631 1255 2575 2500 5500 2 B, E, F 2455 1889 3877 3000 5500 2 B, E, F 3891 2993 6143 Projection (mm) Width (mm) Consoles 1) 1) The specified data are based on a concrete mounting with a pressure-resistant substructure and rafter mounting for wind resistance class 2. Data for other substructures can be found at konsolenplaner.warema.de. Force/screw anchor Force/screw (rafters) (N) up to Number Type (wall) (N) (ceiling) (N) 0 5500 2 B, E, F 1444 1111 2280 2000 5500 2 B, E, F 2185 1681 3450 2500 5500 2 B, E, F 3148 2422 4971 76 2015942en_012.fm/03.2017
e u ne 6 Plane Tree Avenue Dingley Village VIC 3172 T. +61 3 9558 3006 e e u ne 7 een e e e u