JANUARY, 2017 INDEX 1 SAFETY RAILS...2 APPLIED GLASS STOPS...3 TUBES...4 STOOL TRIM AND ACCESSORIES...5 LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. The following metric (SI ) units are found in these details: m meter cm centimeter mm millimeter s second Pa pascal MPa megapascal For specific product applications, Consult your Kawneer representative.
2 SAFETY RAILS SCALE 3" = 1'-0" JANUARY, 2017 RAILING MOUNTED ON FACE OF MULLION 6" (152.4) 1-1/ RAILING MOUNTED BETWEEN MULLIONS 104060 SAFETY RAIL 060274 STAND OFF ANCHOR BAR 060275 STANDARD END CAP 060276 BETWEEN MULLION END CAP 060274 STAND OFF ANCHOR BAR MULLION 060275 STANDARD END CAP 104060 SAFETY RAIL 060276 BETWEEN MULLION END CAP MULLION 104060 SAFETY RAIL DETAIL OF AREA AFTER RAILING MOUNTED ON FACE OF MULLION RAILING MOUNTED BETWEEN MULLIONS
JANUARY, 2017 APPLIED GLASS STOPS 3 SCALE: 3" = 1'-0" GLASS STOP ASSEMBLIES TYP. FACE FACE GUTTER GUTTER 1/ (6.4) INFILL 2- (63.5) 5/8" (15.9) INFILL 2-7/8" (73.0) COMBINATIONS 3/8" (9.5) INFILL 2-5/8" (66.7) 5/8" (15.9) INFILL 2-7/8" (73.0) INFILL 2-3/ (69.9) FACE 027366 GUTTER FACE 027366 GUTTER FACE 027367 GUTTER 3/ (19.0) INFILL 3" (76.2) FACE 027367 GUTTER FACE 027367 GUTTER FACE 027367 GUTTER 7/8" (22.2) INFILL 3-1/8" (79.4) INFILL 3-1/ (82.6) TYPICAL APPLICATION FACE 027368 GUTTER FACE 027368 GUTTER 5/8" (15.9) 7/8" (22.2) 1/ (6.4) INFILL 1-3/16" (30.2) 061444 3/ (19.0) INFILL 069182 5/8" (15.9) PIERCED STOPS 1/ (6.4) INFILL 1-5/8" (41.3) 069275 WET SEALANT 13/16" (20.6) 1/ (6.4) INFILL 1-5/8" (41.3) 069253 TYPICAL APPLICATION WET SEALANT 069190 PIERCED STOP 069114 FIXED STOP 069113 PIERCED STOP
4 TUBES JANUARY, 2017 SCALE 3" = 1'-0" 069256 3" (76.2) 027881 4-279006 4-6" (152.4) 279005 060110 061200 060148 061221 2" (50.8) 279004 5" (127.0) 2" (50.8) 061208 4-6" (152.4) 4-2" (50.8) 061222 5- (139.7) 5- (139.7) 2-3/ (69.9) 279007 5- (139.7) 061223 060119 064503 SPLIT TUBE
JANUARY, 2017 STOOL TRIM AND ACCESSORIES 5 SCALE 3" = 1'-0" STOOL TRIMS 3/ (19.0) 2-3/ (69.9) 069264 2-3/ STOOL TRIM 4-1/ (108.0) 3/ (19.0) 069263 GYPSUM BOARD TRIM 1-1/ 5" (127.0) 069266 5" STOOL TRIM 6-1/8" (155.6) 069267 6-1/8" STOOL TRIM 6-3/ (171.5) 1-1/ 1-1/ 1-3/8" (34.9) 069265 4-1/ STOOL TRIM 069268 6-3/ STOOL TRIM 450VG640 REVERSABLE STOOL TRIM CLIP PACKAGE 450VG140 (STOCK LENGTH) (TRIFAB 400 & TRIFAB VG 450) For use with both Standard and HP Flashing STOOL TRIM CLIPS 451VG640 REVERSABLE STOOL TRIM CLIP PACKAGE (TRIFAB VG 451/451T) APPLIED DOOR STOPS 451VG140 (STOCK LENGTH) For use with both Standard and HP Flashing 069271 STOOL TRIM CLIP PACKAGE NOTE: Not compatible with all sill configurations 11/16" (17.5) 069154 069177
6 BLANK PAGE JANUARY, 2017