Cord Operated Curtain Pole System 10M Metropole 0mm Product Information Cord operated system for domestic and contract applications 10 can be bent to a small radius for bay windows etc For light to medium weight curtains Made to measure Profile length m (chrome effect and classic gold in m, oak effect m) Choice of 1 different finishes - cream, bronze, antique bronze, chrome effect, gunmetal, anodised silver, black, white, steel grey, sand, taupe, classic gold and oak effect Wide range of finials, midials and holdbacks in contemporary or traditional styles Easily fitted to wall or ceiling fix Suitable for use with Wave Standard and Wave XL curtain heading systems 10M
Profile, Bending and Specification Information 0 Standard radius 00mm Wave XL: Min. radius 00mm. Note: It is important to observe the minimum bending radius for Wave XL. The system will not function with a smaller radius. Specification Information - for download refer to www.silentgliss.co.uk (password required). Silent Gliss 10 curtain track, cord drawn, aluminium, assembled complete with gliders 1 at /m. Metal overlap arm 00, pulley set, cord 01, pilot and endstops 0. Face fix with bracket 1/top fix with bracket 1P each screwed to timber/plugged and screwed to block/concrete at 00mm centres. Finished in black, white, cream, taupe, steel grey, sand, bronze, antique bronze, classic gold, gunmetal, chrome effect, anodised silver and oak effect. How To Measure A B A: system width B: cord height Stack Size Calculation Wave Standard 10M a c Glider cord spacing Curtain hook spacing Approx. curtain fullness Stack depth (a) 1. Stack width (b) per metre of Min distance (c) b 1. 1 per metre of 1.0 1 1 per metre of c a c 1. 1 Wave standard with roller gliders 1 per metre of a = Stack depth b = Stack size c = Min. distance Glider cord spacing Curtain hook spacing Approx. curtain fullness Stack depth (a) 1.0 1 Stack width (b) 1 per metre of Min distance (c) 1. 1 1 per metre of (dimensions in cm) Note: Minimum distance (c) allows a standard.cm clearance (front and back).
Stack size calculation Wave XL System width 1 1 1 1 1 1 0 b a c System width Systemwidth b b 1 1 1 1 0 0 1 0 0 0 00 0 00 a = Stack depth cm b = Stack size c = Min. distance cm b (dimensions in cm) System Dimensions Maximum curtain weights Standard Application with Glider Standard Application with Roller/ Wave Roller 1m m m m m m 1m m m m m m 1 1 1 1 1 1 (kg max.) (kgmax.) Wave and Wave XL maximum curtain weights 10M Maximum curtain weight when using Wave/ Wave XL curtain heading is.kg/m unless the weight in above table is less in which case follow table. A greater weight may be achieved using wave roller glider 0W (refer to table above right). Design Options Finials Finials are decorative elements that fit on at the end of the pole. Metropole corded is available with the finial options of ball end, urn, spear or any of the Woodend finials. Please refer to the specific Metropole brochure for more detail and colour options.
A B C A: Without finials, endsets matching the colour of the pole will be applied mm B: 01 Real Wood Spear (available in a wide range of finishes) 1mm C: 0 Ball End (available in a wide range of finishes) 0mm D: 01 Strata mm (available in all pole finishes) E: 0 Groove Ball (pair) mm (available in a wide range of finishes) D E Midials Midials are a curtain pole decoration projecting in front of the pole. Please refer to the specific Metropole brochure for more detail and colour descriptions. A: 0M00 Discus Glass (0mm - red, white, amber, purple, lilac) B: 0M00 Vega Square 0mm C: 0M00 Vega Circle 0mm A B C Holdbacks 10M A B C Wave Standard curtain heading system Midial designs can be used on matching holdback arms. Please refer to the specific Metropole brochure for more detailed and colour descriptions. A: 0HB0 Discus Glass (red, white, amber, purple, lilac) 0mm B: 0HB0 Vega Square 0mm C: 0HB0 Vega Circle 0mm Wave Standard is an exciting new contemporary curtain heading system which allows curtains to hang in a continuous wave which is smooth, simple and elegant. When using the Wave curtain heading system please note the maximum recommended curtain weight is.kg/m. A greater weight may be achieved using wave roller glider 0W (refer to System Dimensions).
0 0 The Wave Standard components are: Glider cord 0mm Glider cord 0mm Hook Curtain tape Iron on top hemming tape 00 End stop 1 Pilot runner 1 0 0 00 0W Additional optional Wave components: Extension (for use with ) Hanger (for use with ) 0 Lead weight for bottom hem 0gr/m 0 Fabric weight for side of curtain 0W Wave roller glider 0mm Wave XL curtain heading system Wave XL is especially designed for high and large application areas through generously designed waves with large cross section dimensions. The Wave XL components are: 1 00 1 1 Cord 0.mm 00 End stop Curtain tape Iron-on tape Limit stop 1 Hanger Heading film Glider Carrier Extension 10M Additional optional Wave XL components: Clip Fitting Information Bracket positioning cm 0 cm 0 cm cm The fixing points for both bracket styles are identical. For the standard bracket 1/-1/ or the ultra brackets 1 and 1
Fitting of track to brackets A: Using brackets 1/ - 1/ B: Using pillar bracket 0 C: Using midial bracket 0A A B C Fitting Options Wall fix with brackets 1/-1/ X (mm) 1/ 1/ 1/ 0 0 1 1/-1/ Extension brackets 1 Track insert (uses screw 0) Wall fix with adjustable bracket 0 X (mm) 0 0-0 1 0 Adjustable bracket Track insert (uses screw 0) 10M Wall fix with Pillar bracket 0 X (mm) 0 0 0 0 0 Pillar bracket 1 Track insert (uses screw 0)
Ceiling fix with support 1P 1. 1P (mm) Ceiling support set Please note: for ceiling fixing with midials, use bracket 1/b The final distances may be outside of the recommendations above depending on curtain make-up and any obstructions. For Wave XL fix the track at least cm from the wall. Ceiling fix with support 1P 1. 1p Ceiling support set (mm) Please note: for ceiling fixing with midials, use bracket 1/b The final distances may be outside of the recommendations above depending on curtain make-up and any obstructions. For Wave XL fix the track at least cm from the wall. Standard Accessories 10M 01 Cord 1 Bracket cover (0mm) 0 Metal overlap arm 0 Twist eye endstop Profile Track insert (uses screw 0) 1 Glider 1 in strip form Machine screw (for insert) 00 Safety Cord Retainer 1/ Pole extension bracket (0mm - all colours) Sets Guide returns, containing; Depending on finials used this set may vary (F, F/) 00 Endset cover for wood
Bearing Case Cover (ø 0mm) Pilot runner Optional Accessories Single Parts 1P (mm) Ceiling support set 0 Adjustable bracket 0 Ball end finial 0 Groove Ball 10 (pair) 0 Pillar bracket 01 Spear finial 00 Finial connecting bracket 01 Strata (cord operated) 0 Groove Ball 10 unslotted 0 Groove Ball 10 slotted 10M 0 Cord/Chain weight (not for use with metal bead chain) Roller glider 0HB Bamboo holdback 0HB0 Glass discus holdback 0HB0 Vega square holdback 0HB0 Vega circle holdback 0M00 Glass discus midial 0M00 Vega square midial 0M00 Vega circle midial 1/b Midial ceiling fix bracket 1/ Pole extension bracket (0mm - all colours) 1/ Pole extension bracket (0mm - all colours) 1p Ceiling support set (mm)
Sets 1 Intermediate pulley, containing 00 Intermediate pulley cover 1 Pulley Profile 1 1 Clamping piece 1 1 Holder 1 Wave Accessories 1 Cord Hook 00 Endstop 1 Pilot runner Wave glider cord (0mm) Wave glider cord (0mm) Wave curtain heading tape Top hemming tape Extension Hanger 10M Limit stop 1 Hanger Heading film Glider Carrier Extension Clip 0 Lead weight 0 gr/m 0 Fabric weight 0W Wave roller glider cord (0mm)
Useful measurements 0 Metal overlap arm 0 1 10M 1