Thermo Scientific Nalgene Labware. break the glass habit. make your lab a safer place

Thermo Scientific Nalgene Labware break the glass habit make your lab a safer place

break the glass habit Table of Contents: Beakers Cylinders Bottles Funnels Centrifuge Tubes Unitary Wash Bottles Dessicators Flasks Labware Value Packs Surface Protectors Page 3 Page 4 Page 5 Page 9 Page 10 Page 13 Page 14 Page 16 Page 18 Page 19 Break the habit of using glass labware and take advantage of the benefits of plastic: durability, light weight, and low cost. Make your lab a safer place and stretch your budget. Break the glass habit, switch to plastic. Thermo Scientific Nalgene Labware can make your lab: Safer Plastic labware won t shatter like glass it s less likely to cause injury or lose valuable contents in the event of breakage Plastic labware is lighter weight and easier to handle than glass No chipping or sharp edges with plastic labware Smarter Eliminate the expense of repairing or replacing broken glassware High-quality Nalgene labware is durable and long-lasting under the rigors of typical lab conditions Plastic labware on average costs less than glassware and won t need replacing as often Light weight means you ll pay less delivery costs than glass HDPE, LDPE and PP labware products are recyclable, unlike borosilicate glass not all labware is created equal 2 thermofisher.com/breaktheglass

beakers Want to eliminate beakers with chipped rims? Nalgene beakers won t chip, crack or shatter and can last for years. No sharp edges lurking in the dishpan. Thermo Scientific Nalgene Beakers; PPCO, PM or HDPE Great for general laboratory use, these beakers, with and without handles are strong and durable. Excellent compatibility with a wide range of chemicals Eliminate chipped rims and sharp edges coon to glass beakers Easy-to-read graduations along with catalog number, size code, resin code, maximum use temperature and no flame symbol on every beaker Light weight for easy handling - feel the difference Meets ISO/DIN 7056 International Standards for Laboratory Plasticware Beakers Autoclavable/Graduated Thermo Scientific Nalgene Griffin Low-Form Beakers; PFA Nalgene Low-Form Beakers are molded from chemically-resistant PFA resin. Heavy-wall design makes these beakers sturdy and tough for continual lab usage. No-drip single-spout design provides precision pouring control Highly resistant to most chemicals, including the strongest sulfuric, nitric, chromic and phosphoric acids will not contaminate contents with leachables Withstands extreme temperatures from 270 C to +250 C for versitility in your lab Autoclavable Notes: Not for use on hotplates. Nalgene Griffin Low-Form Beakers; PPCO 02-591-10AA 30 12 48 02-591-10A 50 12 48 02-591-10B 100 12 48 02-591-10C 150 12 48 02-591-10D 250 6 36 02-591-10E 400 6 36 02-591-10F 600 4 24 02-591-10G 1000 3 12 02-591-10H 2000 1 6 02-591-10J 4000 1 4 Nalgene Griffin Low-Form Beakers; PMP 02-591-15A 30 12 36 02-591-15B 50 12 36 02-591-15C 100 12 36 02-591-15D 150 12 36 02-591-15E 250 6 24 02-591-15F 400 6 24 02-591-15G 600 4 12 02-591-15H 1000 3 12 02-591-15J 2000 1 4 02-591-15AA 4000 1 4 Nalgene Graduated Beakers with Handles; HDPE 02-543-20A 1000 1 6 02-543-20B 3000 1 6 Nalgene Graduated Beakers with Handles; PMP 02-591-9A 1000 1 6 02-591-9C 3000 1 6 Nalgene Griffin Low-Form Beakers; PFA 02-591-22A 50 1 6 02-591-40C 100 1 6 02-591-22C 250 1 6 02-591-40G 600 1 4 02-591-40H 1000 1 4 3

break the glass habit cylinders Light-weight plastic cylinders are easier to manage than glass alternatives. Feel the difference when handling larger sizes. Thermo Scientific Nalgene Graduated Cylinders; PP or PMP The base keeps cylinders stable on the benchtop preventing tipping hazards won t break or chip like glass labware. Large base prevents rolling and tipping (blue base cylinders only) Generous pour spout provides ease in dispensing liquids No meniscus to confuse readings eliminates guesswork Calibrated To Contain and To Deliver at 20 C Excellent chemical resistance for a wide variety of solutions Resists temperatures up to 135 C (275 F) for a variety of uses Autoclavable/Graduated Cat. Nos. 3662 and 3663 are guaranteed to meet accuracy requirements of ASTM Class B, E1272. Meets requirements of CFR 21, Part 177.1520. Thermo Scientific Nalgene Graduated Cylinders; PFA Nalgene PFA Cylinders have extraordinary chemical resistance to aggressive chemicals and other liquids without risk of breaking. This sturdy and durable cylinder tolerates a wide temperature range and is low in extractables. Graduations are molded-in and won t rub off. Extraordinary chemical resistance to aggressive chemicals and liquids won t break or shatter Tolerates a wide temperature range, from -270 C to +250 C (-454 F to +482 F) Low in extractables won t contaminate contents Graduations at 2 increments with numbered graduations every 10 Generous pour spout provides ease in dispensing liquids Autoclavable/Graduated Nalgene Graduated Cylinders; PP, blue PP base Graduations, Limit of Error, 08-572-A 10 0.2 ±0.20 1 24 08-572-B 25 0.5 ±0.34 1 18 08-572-C 50 1 ±0.50 1 18 08-572-D 100 1 ±1.00 1 12 08-572-E 250 2 ±2.00 1 12 08-572-F 500 5 ±4.00 1 8 08-572-G 1000 10 ±6.00 1 6 08-572-H 2000 20 ±12.0 1 4 08-572-J 4000 50 ±29.0 1 2 Nalgene Graduated Cylinders; PMP, blue PP base Graduations, Limit of Error, 08-572-5A 10 0.2 ±0.20 1 24 08-572-5B 25 0.5 ±0.34 1 18 08-572-5C 50 1 ±0.50 1 18 08-572-5D 100 1 ±1.00 1 12 08-572-5E 250 2 ±2.00 1 12 08-572-5F 500 5 ±4.00 1 8 08-572-5G 1000 10 ±6.00 1 6 08-572-5H 2000 20 ±12.0 1 4 08-572-5J 4000 50 ±29.0 1 2 Nalgene Economy Graduated Cylinders; PP Graduations, 08-572-6A 10 0.2 1 24 08-572-6B 25 0.5 1 18 08-572-6C 50 1 1 18 08-572-6D 100 1 1 12 08-572-6E 250 2 1 12 08-572-6F 500 5 1 8 08-572-6G 1000 10 1 6 Nalgene Graduated Cylinder; PFA Color Tolerance Withstand Temperature 08-572-8D* 100 Translucent ±1.50-270 to 250 C (-454 to 482 F) 1 4 thermofisher.com/breaktheglass

bottles Not all bottles are created equal. Inferior containers can leak, shatter or chemically interact with their contents and contaminate your research. Nalgene bottles set the standard for quality and superior performance so exceptional, they also come with a leakproof guarantee. Thermo Scientific Nalgene Wide-Mouth Bottles; HDPE Nalgene Lab Quality Wide-Mouth Bottles and Large Wide-Mouth Bottles are general purpose bottles with countless applications in the lab or field. Linerless caps provide the ultimate in leakproof protection without the use of liner that can wrinkle, cause leaks, or contaiminate your reagents Wide mouth makes these bottles easy to fill with solids or liquids Excellent chemical resistance to most corrosives make these bottles versatile and indispensable in your lab Ideal for storing, shipping and packaging liquids uniform walls provide durability and resistance to splitting or punctures Can be used in a freezer down to -100 C (-148 F) Cat. No. 2120 is recoended for storage of dry chemicals or water sampling. Leak testing on closures 100 and larger done at ambient pressure. Leakproof Nalgene Lab Quality Wide-Mouth Bottles; HDPE, PP screw closure (oz) Size, Neck ID, OD, Height with 02-893-5A 30 (1) 28 21 34 63 12 72 02-893-5B 60 (2) 28 21 39 86 12 72 02-893-5C 125 (4) 38 28 50 99 12 72 02-893-5D 250 (8) 43 33 61 131 12 72 02-893-5E 500 (16) 53 44 73 168 12 48 02-893-5F 1000 (32) 63 53 91 199 6 24 10-346-9 1500 (48) 63 52 91 284 6 24 Nalgene Large Wide-Mouth Bottles; HDPE, white PP screw closure L (gal) Size, Neck ID, OD, Height with 11-815-11A 2 (1/2) 100 89 119 244 1 6 11-815-11B 4 (1) 100 89 153 288 1 6 Select the perfect container for your application! Go to www.thermofisher.com/nalgenecontainers or download our mobile app from itunes or the Android Market - search Nalgene Bottles. 5

not all labware is created equal Thermo Scientific Nalgene Narrow-Mouth and Large Narrow-Mouth Bottles; PPCO Nalgene Narrow-Mouth Bottles are ideal for lab applications requiring excellent chemical resistance. Autoclavable with and without contents. Linerless caps provide the ultimate in leakproof protection without the use of liner that can wrinkle, cause leaks, or contaminate your reagents Provides excellent chemical resistance for a variety of lab applications Translucence provides good clarity for viewing contents 4 and 8 L Large Narrow-Mouth Bottles feature a built-in shoulder loop for attaching identification tag Lighter-weight than glass make for easy lifting Autoclavable/Leakproof Thermo Scientific Nalgene Narrow-Mouth Bottles; FEP, ETFE closure Nalgene FEP Narrow-Mouth Bottles are the most inert, chemical resistant, corrosion-resistant containers available. Outstanding resistance to virtually all chemicals and extreme temperatures. Ideal for trace metal analysis and applications involving organic solvents. Guaranteed leakproof. Can withstand rigorous cleaning in boiling nitric acid temperature range from -105 C (-157 F) to +150 C (+302 F) for a wide range of uses including high-purity storage. Can be autoclaved for sterilization Autoclavable/Leakproof/Transparent Note: These bottles cannot withstand gaa irraditation. Nalgene* Narrow-Mouth Autoclavable Narrow-Mouth Bottles; PPCO, Bottles; PP screw PPCO, closures PP screw closures (oz) (oz) Size, Neck ID, ID, OD, OD, Height with No per 2006-9125 02-923-11E 44 (1/8) 13 13 88 16 16 41 41 12 12 72 2006-9025 02-923-11D 88 (1/4) 20 20 14 14 25 25 45 45 12 12 72 2006-9050 02-923-8G 15 15 (1/2) 20 20 14 14 25 25 58 58 12 12 72 2006-0001 02-925-A 30 30 (1) (1) 20 20 14 14 34 34 61 61 12 12 72 2006-0002 02-925-B 60 60 (2) (2) 20 20 14 14 37 37 85 85 12 12 72 2006-0004 02-925-C 125 (4) (4) 24 24 18 18 50 50 101 12 12 72 2006-0008 02-925-D 250 (8) (8) 24 24 18 18 61 61 133 12 12 72 2006-0016 02-925-E 500 (16) 28 28 21 21 73 73 170 12 12 48 2006-0032 02-925-F 1000 (32) 38-430 27 27 91 91 216 66 24 Nalgene Large Narrow-Mouth Bottles; PPCO, PP screw closure Nalgene Narrow-Mouth Bottles; FEP, ETFE closure L (gal) (oz) Size, Size, Neck ID, Neck ID, OD, OD, Height with Height with 02-924-A 2 (1/2) 38-430 25 121 249 1 6 02-924-B 4 (1) 38-430 25 152 333 1 6 02-924-C 8 (2) 53B 37 193 409 1 6 02-92330AA 30 (1) 20 14 32 75 1 8 02-923-30BB 60 (2) 20 14 39 84 1 8 02-923-30A 125 (4) 24 17 46 115 1 6 02-923-30B 250 (8) 24 17 60 134 1 4 02-923-30C 500 (16) 28 20 73 166 1 4 02-923-30D 1000 (32) 38 26 90 203 1 4 02-923-30E 2000 (64) 38-430 24 121 245 1 2 wet floor no more... guaranteed leakproof! 6 thermofisher.com/breaktheglass

Thermo Scientific Nalgene Narrow and Wide-Mouth Economy Bottles; HDPE Nalgene Narrow and Wide-Mouth Economy Bottles (regular and bulk pack) are lightweight versions of the original Nalgene Lab Quality Bottles, and are suitable for general purpose laboratory applications. More flexible version of Nalgene Lab Quality Bottles for less rigorous lab use where a heavier bottle is not required. Wide mouth is easy to fill. Economical and recyclable Linerless caps ensure leakproof performance without a liner that can wrinkle, cause leaks and contaminate your solutions Available in either regular and bulk packs Leakproof Nalgene Narrow-Mouth Economy Bottles; natural HDPE, natural PP screw closure Nalgene Translucent Wide-Mouth Economy Bottles; natural HDPE, natural PP screw closure (oz) (oz) Size, Size, Neck ID, Neck ID, OD, OD, Height with 03-313-2A 30 (1) 20 14 34 61 72 03-313-2B 60 (2) 20 14 37 85 72 03-313-2C 125 (4) 24 18 50 101 72 03-313-2D 250 (8) 24 18 61 133 72 03-313-2E 500 (16) 28 21 73 170 48 03-313-2F 1000 (32) 38-430 27 91 216 24 Height with 03-313-4A 30 (1) 28 21 34 63 72 03-313-4B 60 (2) 28 21 39 86 72 03-313-4C 125 (4) 38 28 50 99 72 03-313-4D 250 (8) 43 33 61 131 72 03-313-4E 500 (16) 53 44 73 168 48 03-313-4F 1000 (32) 63 53 91 199 24 Nalgene Narrow-Mouth Economy Bottle Bulk Pack; HDPE, PP screw closure (oz) Size, Neck ID, OD, Height with 03-313-5A 125 (4) 24 18 50 101 500 03-313-5B 250 (8) 24 18 61 133 250 03-313-5C 500 (16) 28 21 73 170 125 03-313-5D 1000 (32) 38-430 27 92 216 50 Nalgene Wide-Mouth Economy Bottle Bulk Pack; HDPE, PP screw closure (oz) Size, Neck ID, OD, Height with 02-960-19 60 (2) 28 21 39 86 1000 03-313-6A 125 (4) 38 28 50 99 500 03-313-6B 250 (8) 43 33 61 131 250 03-313-6C 500 (16) 53 44 73 168 125 03-313-6D 1000 (32) 63 53 91 199 50 nalgene economy bottles stretch your budget 7

break the glass habit Thermo Scientific Nalgene Amber Wide-Mouth Rectangular Bottles; HDPE Nalgene Amber Wide-Mouth Rectangular Bottles help protect lightsensitive liquids or dry materials from exposure and take up less shelf space than traditional round bottles. Amber HDPE reduces UV light transmissions to protect lightsensitive liquids. Rectangular shape is great for space saving use in the freezer to -100 C (-148 F) Excellent chemical resistance to most acids, bases and alcohols make these excellent containers to protect your valuable samples Linerless caps provide the ultimate in leakproof protection without the use of a liner that can wrinkle, cause leaks, or contaminate your reagents Leakproof Compliance: Product meets the requirements for light-resistant containers per USP latest edition. Thermo Scientific Nalgene Round Carboys with Spigots; LDPE, PP spigot and screw closure Nalgene Wide-Mouth Rectangular Bottles; Amber HDPE with amber PP closure (oz) Size, Neck ID, OD, Height with No per 02-924-10A 125 (4) 28 21 61 x 38 102 12 72 02-924-10C 250 (8) 38 28 76 x 51 117 12 72 02-924-10E 500 (16) 48 37 94 x 60 147 12 48 02-9241-0G 1000 (32) 53 44 125 x 71 180 6 24 02-924-10J 2000 (64) 63 51 152x84 242 4 12 Nalgene Round Carboys with Spigots; LDPE, PP spigot and screw closure, TPE gasket L (gal) Size, Neck ID, OD, Height with 02-963-AA 4 (1) 38-430 26 154 335 1 6 02-963-A 10 (2-1/2) 83B 64 250 389 1 6 02-963-BB 20 (5-1/2) 83B 64 286 528 1 4 02-963-B 25 (6-1/2) 83B 64 287 594 1 1 02-963-C 50 (13) 83B 64 379 678 1 1 Nalgene Round Carboys have a spigot boss which is molded in one piece with the carboy for convenience, strength and leak resistance. Suitable for collecting and dispensing distilled water, acids and reagents. Molded graduations in 1 gal. and 5 L increments for ease in dispensing Integrated shoulder handles make lifting comfortable for four largest sizes Molded in spigot boss provides strength and leak resistance Graduated/Leakproof proven performance, classic design 8 thermofisher.com/breaktheglass

funnels Delicate glass funnels are easy to break. You ll have years of dependable and unbreakable service from any of our Nalgene Funnels. Thermo Scientific Nalgene Analytical Funnels; PPCO Nalgene Analytical Funnels with long stems and external ridges are for use with standard filter papers. Outside ribbing eliminates air lock. Funnels are chemically-resistant to a wide variety of lab chemicals and reagents. Body of funnel is at a 60 angle with internal ribs sloped at 58 for rapid filtration Outside ribbing eliminates air lock Shatterproof these funnels will provide years of dependable use in your lab Designed for use with standard filter papers Autoclavable Thermo Scientific Nalgene Powder Funnels; PPCO Nalgene Powder Funnels are used for transferring powders. The parallel stem minimizes bridging while external ribbing prevents air locks. Resistant to a wide range of lab chemicals and reagents. Polypropylene is break and shatter-resistant Chemically compatible with a wide variety of lab reagents Suitable for general lab use, it is a durable replacement for glass funnels Autoclavable Nalgene Analytical Funnels; PPCO Top Dia, Stem L, Stem OD, Fits Paper of Dia, 10-347-C 34 52 6 10 55 12 36 10-347-A 48 50 7 23 70 12 36 10-347-B 55 61 7 41 90 12 36 10-347-D 66 65 7 65 110 12 36 10-347-E 77 80 7 114 125 6 36 10-347-G 104 99 9 254 185 4 24 10-347-H 158 151 14 976 240 2 12 Nalgene Powder Funnels; PPCO. Funnel Top ID, Overall H, Stem Dia, Stem L, 10-348-A 65 68 67 16 22 12 36 10-348-B 79 115 85 16 29 12 36 10-348-C 104 243 106 21 33 6 24 10-348-D 147 716 136 27 30 4 24 Nalgene Separatory Funnels; FEP, ETFE TFE stopcock (oz) Size, 10-437-25A 125 (4) 28 1 4 10-437-25B 250 (8) 33 1 4 10-437-25C 500 (16) 43 1 4 10-437-25D 1000 (32) 53 1 4 10-437-25E 2000 (64) 53 1 2 Thermo Scientific Nalgene Separatory Funnels; FEP, ETFE TFE stopcock Inert, nearly transparent and autoclavable. Won t chip, crack or shatter like glass separatory funnels. FEP stopcock assembly has excellent chemical resistance, and does not require lubrication. So transparent that phase interface is visible down to the stopcock and nonwetting surface enhances complete drainage Shatterproof and impervious to any chemical used in a separatory funnel No phthalates to contaminate analyses Useful in hazardous liquid separations Autoclavable/Leakproof Note: Stopcock not autoclavable, chemically disinfect Ordering Information: Stem lengths, 65. 9

not all labware is created equal centrifuge tubes Spin with confidence. Nalgene centrifuge tubes are molded from advanced bioanalytical-grade resins. Their high purity means low extractables and leaching in your application, plus they wont shatter in your centrifuge. Nalgene Oak Ridge High Speed Centrifuge Tubes, PC, PP screw closure OD x H, Size, 05-529-A 10 16.1 x 80.5 13 10 100 05-529-E 28 25.8 x 94.0 20 10 100 05-529-B 30 25.8 x 94.0 20 10 100 05-529-C 50 28.8 x 106.4 24 10 100 05-529-D* 85 38.2 x 105.2 33 10 100 Thermo Scientific Nalgene Oak Ridge High-Speed Centrifuge Tubes; PC or PPCO, PP screw closures Nalgene Oak Ridge High-Speed Centrifuge Tubes are strong and have excellent mechanical strength. PC tubes are transparent, while PPCO tubes offer excellent chemical compatibility. Designed for high-speed centrifugation up to 50,000xg in refrigerated and non-refrigerated centrifuges. PC provides superior mechanical strength and visual clarity Can be autoclaved repeatedly but autoclaving will reduce product life PP linerless closures included easy to clean and provide leakproof performance under ordinary use for most spins <10,000xg For leakproof performance >10,000xg, use a sealing cap or sealing cap assembly (sold separately) Autoclavable/Biohazard/Leakproof Includes: polypropylene screw closure. Ordering Information: Optional sealing-cap assemblies available for selected sizes. Use Cat. No. DS3131-0020 (for 28 and 30 tube) and Cat. No. DS3131-0024 (for 50 tube). Note: Centrifuge tubes must be filled at least 80% for proper performance. Nalgene Oak Ridge High Speed Centrifuge Tubes, PPCO, PP screw closure OD x H, Size, 05-529-1A 10 16.1 x 80.5 13 10 100 05-529-1B 28 25.8 x 94.0 20 10 100 05-529-1C 30 25.8 x 93.5 20 10 100 05-529-1D 50 28.8 x 105.9 24 10 100 Actual brim capacity of 3118-0050 and 3119-0050 is 42. * Actual brim capacity of 3118-0085 is 81. 10 thermofisher.com/breaktheglass

Thermo Scientific Nalgene Oak Ridge High- Speed Centrifuge Tubes, PC, PP screw Sealing closure; silicone gasket Nalgene Oak Ridge High-Speed PC Centrifuge Tubes exhibit excellent mechanical strength and are designed for high-speed centrifugation up to 50,000xg in refrigerated and non-refrigerated centrifuges Round bottoms to fit high speed rotors Transparent, allowing easy content viewing PP sealing caps with silicone gaskets for extra leak protection when spinning >10,000xg or spinning hazardous materials Autoclavable/Biohazard/Leakproof Includes: Polypropylene sealing cap with silicone gasket. Ordering Information: Optional sealing-cap assemblies available for selected sizes. Use Cat. No. DS3131-0020 (for 30 tube) and DS3131-0024 (for 50 Tube). Thermo Scientific Nalgene Oak Ridge High- Speed Centrifuge Tubes; PPCO, PP screw Sealing closure, silicone gasket Nalgene Oak Ridge High Speed Centrifuge Tubes with Sealing Cap; PC, PP screw closure, silicone gasket PC Nalgene Oak Ridge High-Speed Centrifuge Tubes with Sealing Cap; PPCO, PP screw closure, silicone gasket OD x H, OD x H, Size, Size, 05-563-7A 10 16.1 x 83.8 13 10 50 05-563-7B 16 18.1 x 107.2 15 10 50 05-563-7E 30 25.8 x 102.6 20 10 50 05-563-7G 50 28.8 x 114.8 24 10 50 05-563-10A 10 16.1 x 82.8 13 10 50 05-563-10B 16 18.1 x 106.4 15 10 50 05-563-10E 30 25.8 x 102.1 20 10 50 05-563-10G 50 28.8 x 113.5 24 10 50 Actual brim capacity of 3139-0050 is 42. Nalgene Oak Ridge High-Speed PPCO Centrifuge Tubes exhibit excellent mechanical strength. Translucent tubes are contactclear and allow viewing of liquid levels. Designed for high-speed centrifugation up to 50,000xg in refrigerated and non-refrigerated centrifuges. Greater chemical resistance than polycarbonate Can be autoclaved repeatedly last longer than polycarbonate tubes under conditions of repeated autoclaving PP sealing caps with silicone gaskets included for extra leak protection when spinning >10,000xg or spinning hazardous materials Autoclavable/Biohazard/Leakproof Includes: Polypropylene sealing cap with silicone gasket. Ordering Information: Optional sealing-cap assemblies available for selected sizes. Use Cat. No. DS3131-0020 (for 30 tube) and DS3131-0024 (for 50 Tube). spin with confidence 11

break the glass habit Thermo Scientific Nalgene Oak Ridge High-Speed Centrifuge Tubes; FEP, ETFE screw closure Nalgene Oak Ridge High-Speed FEP Centrifuge Tubes are excellent for centrifugation of aggressive chemicals, chloroform and phenol extractions in refrigerated machines up to 50,000xg. Withstand temperatures from -100 C to 150 C (-148 F to 302 F) for versatility from the freezer to the autoclave and more Use to 50,000xg in refrigerated centrifuges (tubes must be filled 100% to prevent collapse) Leakproof ETFE closures prevent material loss under ordinary use for most spins up to 10,000xg Sealing caps available for 30 and 50 size to assure leakproof service especially at high speeds >10,000xg or when spinning hazardous materials Autoclavable/Biohazard/Leakproof Ordering Information: Optional sealing caps available Cat. No. DS3131-0020 (for 30 tube) and DS3131-0024 (for 50 tube). Nalgene Oak Ridge High-Speed Centrifuge Tubes; FEP, ETFE screw closure OD x H, Size, 05-562-16C 10 16.0 x 79.0 13 2 10 05-562-16A 30 25.7 x 93.0 20 2 10 05-562-16B* 50 28.8 x 106.7 24 2 10 *Designed to fit standard rotors. Actual brim capacity of 3134-0010 is 42. Thermo Scientific Fiberlite rotors with Nalgene tubes bring together quality and performance. Rotor selection is critical when it comes to sample safety and centrifuge performance. Thermo Scientific Fiberlite carbon fiber rotors are designed to deliver exceptional performance without fatigue or corrosion for worry-free operation spin after spin. www.thermofisher.com/fiberlite 12 thermofisher.com/breaktheglass

unitary wash bottles Our wash bottles are molded in one piece with a unique vent system that keeps hazardous volatile liquids in the bottle and off the lab bench ensuring safe delivery when you want it, not when you don t. Nalgene Unitary Wash Bottles; LDPE bottle/tubulation, PP screw closure (oz) size, 03-409-10C 125 (4) 24 6 48 03-409-10D 250 (8) 38 4 36 03-409-10E 500 (16) 38 4 24 03-409-10EE 750 (25) 38 4 24 03-409-10F 1000 (32) 43 2 12 Thermo Scientific Nalgene Unitary Wash Bottles; LDPE Nalgene Unitary Wash Bottles are designed with a wide mouth for faster, easier filling. No assembly required Easy to squeeze - easy on your hands Made from chemically-resistant LDPE for long life and dependable service Tip delivers a uniform, straight, ultrafine stream without sputtering, but can also be cut back to increase flow Contents can be dispensed without tipping or shaking Leakproof Nalgene Vented Unitary Right-To-Know Wash Bottles; LDPE bottle, PP or HDPE closure, PTFE membrane (oz) Chemical Color 03-409-19A 250 (8) Acetone Red 4 36 03-409-19E 250 (8) Distilled Water Natural 4 36 03-409-20A 500 (16) Acetone Red 4 24 03-409-20B 500 (16) Ethyl Alcohol White 4 24 03-409-20C 500 (16) Methanol Green 4 24 03-409-20D 500 (16) Isopropanol Yellow 4 24 03-409-20E 500 (16) Distilled Water Natural 4 24 03-409-20F 500 (16) Sodium Hypochlorite White 4 24 (Bleach) 03-409-21A 1000 (32) Acetone Red 2 12 03-409-21E 1000 (32) Distilled Water Natural 2 12 Thermo Scientific Nalgene Vented Unitary Right-To-Know Wash Bottles; LDPE bottle, PP or HDPE closure, PTFE membrane Nalgene Vented Right-To-Know Unitary Wash Bottles are marked with four colors, NFPA diamonds, GHS compliant hazard symbols, and Right-To- Know chemical information. Choose from seven chemical markings. A strong, straight and steady stream of liquid is dispensed when the wash bottle is squeezed. Unitary bottle prevents contamination when filling the bottle. Vented. PP or HDPE closure, PTFE membrane Bottle and tubulation molded in one piece to prevent chemical splash when removing closure and contamination when filling Unique 38 colored vented closure designed to prevent dripping Sturdy polypropylene closures HDPE on Sodium Hypochloride (bleach) bottles Color-coded bar corresponds to closure, preventing crosscontamination Prelabeled with ICS name and formula, as well as NFPA symbols for chemical handling, hazard, care and storage of six coonly-used chemicals Fully assembled/leakproof Printed with long-lasting chemically-resistant inks Compliance: Meets OSHA requirements for workplace chemical container labeling. your right to know, clear and simple 13

not all labware is created equal desiccators Nalgene Desiccators weigh much less than traditional glass desiccators and are easier to transport around the lab. They are an economical alternative to glass, virtually unbreakable and shatterproof. Nalgene Autoclavable Desiccators; blue PP body, clear PC cover Exterior H, cm (in) Inside Dia, cm (in) OD, cm (in) Max Clearance Above Plate, cm (in) 08-642 26 (10-1/4) 25 (9-7/8) 33 (13) 14.3 (5-5/8) 1 4 08-642-15 15 (5-15/16) 15 (5-15/16) 18 (7-1/8) 14.3 (3-7/16) 1 6 Nalgene Desiccator with Stopcock; blue PP body Thermo Scientific Nalgene Autoclavable Desiccators; PP body, PC cover These desiccators are much lighter than glass equivalents, making them easy to move around the lab. Desiccators have a transparent PC cover for easily viewing contents. Resistant to all solid desiccants. Clear polycarbonate cover has recessed rim to keep grease off benchtop when cover is set down No gasket required, only grease is needed Small desiccator (Cat. No. 5315-0150) comes with a 140 aluminium desiccator plate Autoclavable Large desiccator requires a 230 plate, sold separately Cat. No. 5312-0230 Alerts: Do not use concentrated acids as desiccants. Notes: Repeated autoclaving will reduce the life of the product. Exterior H, cm (in) 08-642-5 26.2 (10-1/4) Inside Dia, cm (in) OD, cm (in) Max Clearance Above Plate, cm (in) 24.6 (9-7/8) 33 (13) 14.3 (5-5/8) 1 4 Thermo Scientific Nalgene Desiccator with Stopcock; PP body, PC cover Nalgene Desiccator with Stopcock is designed for room temperature use only. Do not autoclave. Full vacuum may be applied following supplied instructions for proper performance Polypropylene stopcock with PTFE Plug can be used with 1/4 in. (6.4 ) I.D. tubing (tubing sold separately) Vacuum connection is located on the desiccator body making the cover easier to handle Straight bore design eliminates stopcock vacuum leakage No gasket is necessary; grease makes polycarbonate cover airtight even without applying a vacuum Recessed rim keeps grease off benchtop when cover is set down Desiccator takes any standard 230 desiccator plate such as Cat. No. 5312-0230 (sold separately) Includes: Cover and stopcock. Requires: 230 plate. won t crack, shatter, or break 14 thermofisher.com/breaktheglass

Thermo Scientific Nalgene Transparent Classic Design Desiccator; PC Nalgene Transparent Classic Design Desiccator is a safe and economical alternative to glass. Shatterproof and lightweight, this desiccator is easily transportable around the lab and ergonomic to handle. It s grease-free operation keeps your gloves clean and slipfree. Can be used under full vacuum and non-vacuum conditions. Lightweight and virtually unbreakable, the wide base provides superior stability Similar in dimensions to glass desiccators but more cost-effective Includes ports on both cover and base for maximum convenience Holds a vacuum of 28 in. Hg (71.1 cm) for 24 hours Silicone o-ring ensures an airtight seal; no need to use grease that can contaminate your gloves and your lab Removable stopcock can be replaced if needed or removed and the port capped (cap included) if not used Transparent Recoended for: Ideal for vacuum and non-vacuum applications. Follow vacuum application instructions included with the product for proper function at full vacuum. Ordering Information: Takes standard 230 desiccator plate such as Nalgene Cat. No. 5312-0230 sold separately. Accepts 1/4 in. to 3/8-in. I.D. (0.6 to 1 cm) vacuum tubing, also sold separately. Nalgene Transparent Classic Design Desiccator; PC H, cm (in) Inside Dia, cm (in) OD, cm (in) Max Clearance Above Plate, cm (in) 08-642-7 33 (13) 25 (10) 28 (11) 20 (7-3/4) 1 4 Desiccator Plate OD, cm (in) 08-642-10 230 (9 1/16) 1 6 lighten your load with Nalgene Desiccators 15

break the glass habit flasks Shatter-proof Nalgene flasks won t chip, crack or leak and are safer for use in a shaker than glass alternatives. Thermo Scientific Nalgene Class B Volumetric Flasks with Screw Caps; PPCO or PMP Nalgene Class B Volumentric Flasks are calibrated To Contain and To Deliver at 20 C (68 F). Lighter in weight than glass, these breakresistant flasks protect against leakage and contamination. Excellent chemical resistance. Break-resistant for years of dependable use in your lab Individually hand calibrated, permanent color graduation line; provide precision and accuracy for the life of the product No meniscus to confuse readings 200 size has additional line at 203 level for BOD and DO determinations Demonstrates excellent chemical resistance Autoclavable/Leakproof/Graduated Compliance: Meets ASTM* E 288 and ISO 384 Class B tolerances for consistent quality and dependability. Nalgene Class B Volumetric Flasks with Screw Caps; PPCO, PP screw closure Size, Limit of Error, Height with cm 10-198-50A 50 13 ±0.10 14.6 1 12 10-198-50B 100 20 ±0.16 18.4 1 12 10-198-50C 200 20 ±0.20 20.9 1 12 10-198-50D 250 20 ±0.24 22.2 1 12 10-198-50E 500 24 ±0.40 27.9 1 8 10-198-50F 1000 28 ±0.60 31.7 1 6 Nalgene Class B Volumetric Flasks with Screw Caps; PMP, PP screw closure Size, Limit of Error, Height with cm 10-198-52A 50 13 ±0.10 14.6 1 12 10-198-52C 100 20 ±0.16 18.4 1 12 10-198-52E 250 20 ±0.24 22.2 1 12 10-198-52F 500 24 ±0.40 27.9 1 12 10-198-52G 1000 28 ±0.60 31.7 1 6 Nalgene Erlenmeyer Flasks with Screw s; FEP, with ETFE screw closure Size, 10-041-16B 125 33 1 4 10-041-16C 250 38 1 4 Thermo Scientific Nalgene Erlenmeyer Flasks with Screw s; FEP, with ETFE screw closure Nalgene FEP Erlenmeyer Flasks with closures are unbreakable, nearly transparent, autoclavable, non-contaminating and resist virtually all chemicals including organic solvents and concentrated oxidizing agents. Excellent chemical resistance makes these flasks suitable for exposure to nearly any lab chemical Nearly transparent for good view of contents For trace metal work, can be boiled in concentrated nitric acid Flask withstands temperatures from -270 C to +205 C (-454 C to +401 F); closure from -100 C to +150 C (-148 F to +302 F) for a wide range of demanding applications Screw closure prevents spills and contamination Autoclavable Includes: ETFE screw closures. Note: Do not use on a hotplate. 16 thermofisher.com/breaktheglass

Thermo Scientific Nalgene Erlenmeyer Flasks; PC, PP screw closure Nalgene PC Erlenmeyer Flasks are used for preparation and storage of culture media and many culturing techniques. Safer than glass flasks for use in shakers. Linerless closure protects contents from spills and contamination. Molded-in graduations make liquid levels easy to estimate Shatter-proof polycarbonate is safer than glass Noncontaminating, tight-sealing, linerless polypropylene screw closures protect contents from spills and contamination Autoclavable/Transparent/Graduated Includes: Polypropylene screw closures. Nalgene Erlenmeyer Flasks; PC, PP screw closure Size, 10-041-17C 125 33 6 24 10-041-17D 250 38 4 12 10-041-17E 500 43 4 12 Nalgene Erlenmeyer Flasks with Screw s; PMP, PP screw closure Size 10-042-5C 125 33 6 24 10-042-5E 250 38 4 12 10-042-5G 500 43 4 12 10-042-5J 1000 53 2 6 Thermo Scientific Nalgene Erlenmeyer Flasks; PMP, PP screw closure Nalgene PMP Flasks are useful for titrations, preparation and storage of culture media. An excellent combination of transparency, chemical resistance, impact strength and autoclavability Excellent chemical resistance to a wide variety of lab reagents More transparent than polypropylene but with similar chemical resistance Ideal for preparation and storage of culture media and titrations All sizes have easy-to-read graduations Autoclavable/Graduated Includes: Polypropylene screw closures. Thermo Scientific MaxQ Orbital Shakers deliver reliability, simplicity and flexibility. Our orbital shakers are easy to operate, offer a wide range of options that can grow with you, and will be a partner in your lab for many years allowing you to spend more time pursuing your objectives and less time managing your shakers. By pairing MaxQ orbital shakers and Nalgene Erlenmeyer Flasks you are assured of the highest quality products working together seamlessly so you can focus on your next discovery! Visit thermofisher.com/shakers for additional information on our family of orbital shakers. 17

not all labware is created equal labware value packs Thermo Scientific Nalgene Labware Value Pack The Nalgene Labware Value Pack is an assortment of popular labware items used every day in every lab; in a convenient pack and ready for your research right out of the box! Nalgene Labware sets the standard for quality and superior performance for your valuable research: with the highest quality materials for dependable performance so trusted, millions are used in laboratories world wide This labware value pack makes a convenient and economical new lab starter kit or is a great refresher pack for established labs. Convenient - receive 20 items with one catalog number Cost effective - variety of everyday lab items at one low price Won t shatter or break - keeping you and your valuable solutions safe Nalgene Labware Value Pack Cat. No. Includes Product Size Material NALGENEPACK 6 Straight-Sided Jars 500 PPCO 4 Unitary Wash Bottles 500 LDPE 2 Graduated Cylinder 100 PPCO 1 Graduated Cylinder 500 PPCO 1 Graduated Cylinder 1000 PPCO 1 Griffin Low-Form Beaker 50 PPCO 1 Griffin Low-Form Beaker 100 PPCO 1 Griffin Low-Form Beaker 250 PPCO 1 Griffin Low-Form Beaker 600 PPCO 1 Griffin Low-Form Beaker 1000 PPCO 1 Unwire Half-Rack, Blue for 30 tubes RMF* *Resmer Manufacturing Technology convenient lab start up kit or refresher pack Visit: www.thermoscientific.com/nalgenevaluepack 18 thermofisher.com/breaktheglass

surface protectors Nalgene Super Versi-Dry Surface Protectors; absorbent fiber with PE backers Description LxW 46 x 102cm (18 x 40 in) 175 MATS Nalgene Super Versi-Dry can protect your people and your lab by absorbing and containing hazardous spills. The flat cushioned surface minimizes breakage when handling fragile glassware. Plastic backing prevents liquid breakthrough. Thermo Scientific Nalgene Super Versi-Dry Surface Protectors; absorbent fiber with polyethylene backers 14-206-41 14-206-58 Table Mat 51 x 110cm (20 x 43 in) 150 14-206-61 Floor Mat 102 x 508cm (40 x 200 in) 1 14-206-59 Fume Hood Mat 46 x 51cm (18 x 20 in) 100 14-206-60 Floor Mat 46 x 102cm (18 x 40 in) 50 14-206-37 51 x 76m (20 in x 250 ft) 1 14-206-39 30m x 51cm (20 in x 100 ft) 4 ROLLS Nalgene Super Versi-Dry Surface Protectors are long-lasting, waterproof, skid-resistant and chemical resistant. Cloth-like top layer will not fall apart even when wet. Cushioned surface minimizes breakage of glass labware when dropped or tipped over Sheets lie flat and are skid resistant use as a bench protector, tray liner, floor mat, cage liner or surgical mat Low-pile flat surface provides stability for glassware that is likely to tip and is an ideal replacement for the blue diaper Polyethylene backing resists harsh chemicals and protects your benchtop from spills and corrosion Super Versi-Dry quickly absorbs up to 1050 /m2 to quickly absorb spills with its thousands of Thirsty Cells ask for a FREE sample of Super Versi-Dry at thermofisher.com/breaktheglasshabit absorbs spills, cushions breakable items 19

Our iphone and Android app helps you choose the best Thermo Scientific Nalgene Bottles, Carboys and Vials for your needs. Download our app by going to the itunes App store or Android Market and search for Nalgene Bottles. Or, visit our online Bottles and Carboys Selection Guide atwww.thermofisher.com/nalgenecontainers. select the perfect container for your application thermofisher.com/breaktheglass 2016 Thermo Fisher Scientific Inc. All rights reserved. iphone and itunes are registered trademarks of Apple Inc. Android is a trademark of Google Inc. All other trademarks are the property of Thermo Fisher Scientific Inc. and its subsidiaries. In the United States: For customer service, call 1-800-766-7000 To fax an order, use 1-800-926-1166 To order online: www.fishersci.com BRRSDBTGH 0916 In Canada: For customer service, call 1-800-234-7437 To fax an order, use 1-800-463-2996 To order online: www.fishersci.ca BN0926161