almi c P r o d u c The Surgeon s Edge

20 O 10 phth almi c P r o d u c tc a t al o g 877 991-1110 732 626-6466 Angiotech, 100 Dennis Drive, Reading, PA 19606, U.S.A. 732 626-6466 877 991-1110 (USA and Canada only) Fax: 610 404-4010 OPG-PM-255R2 03/10 SHARPOINT, THE SURGEONS EDGE, CLEARPORT, CLEARTRAP, DERMAGLIDE, EYE GARTER, EASY SHIELD, INFINITE EDGE, IQ GEOMETRY, IQ TECHNOLOGY, M.E.T., PILOT TIP, POLYSYN, POLYSYN FA, POLYVIOLENE, SHARPGUARD, SHARPTOME, ULTRAGLIDE, ULTRAFIT, ULTRAPLUG, and V-CANN are trademarks of Surgical Specialties Corporation. ETHICON, VICRYL, PERMAHAND SILK, ETHILON, MERSILENE, and PROLENE are trademarks of Johnson and Johnson Company. SYNETURE, POLYSORB, DEXON, SOFSILK, MONOSOF, DERMALON, SURGIDAC, SURGIPRO and SURGILENE are trademarks of Covidien. 2010 Angiotech Pharmaceuticals, Inc. 2001-2010 Surgical Specialties Corporation. All Rights Reserved. The Surgeon s Edge

2010 Ophthalmic Product Catalog 877 991-1110 732 626-6466

OPHTHALMIC KNIVES Guarded SharpGuard Guarded Knives... 1 Paracentesis Incision ClearPort Paracentesis Knives... 2 Stab Knives... 2 Groove & Limbal Relaxation Incision Precision Depth Knives... 3 Restricted Depth Knives... 3 Phaco Incision IQ Geometry Knives, Bevel-Up... 4 IQ Geometry ClearTrap Knives, Bevel-Up... 4 Clear Corneal Knives, Double-Bevel... 5 Clear Corneal Knives, Double-Bevel, Parallel Sides... 5 Slit Knives, Bevel-Up... 6 Slit Knives, Double-Bevel... 6 Slit Knives, Bevel-Up, Parallel Sides... 7 Slit Knives, Single-Bevel... 7 Phaco/Implant Incision ClearTrap Trapezoid Clear Corneal/Implant Knives, Bevel-Up... 8 Pilot Tip Implant Knives, Bevel-Up... 9 Implant Knives, Bevel-Up... 9 Crescent Sharptome Crescent Knives... 10 Mini-Crescent Knives... 10 Vitrectomy Vitrectomy Knives... 11 Specialty Knives Spoon Knives, Double-Bevel... 11 Specialty Knives... 12 Blade and Tip Handles... 12 OPHTHALMIC SUTURES Introduction/How to Read Charts & Box Labels... 13 Suture Materials Chart... 14 Ophthalmic Needle Profile Chart... 15 Needle Specifications Chart... 16 Plain Gut... 17 Chromic Gut... 17 PolySyn (Polyglycolic Acid)... 18 Polyviolene (Polyester)... 20 Nylon... 21 Silk... 25 Polypropylene... 27 OPHTHALMIC CANNULAS Anesthesia Peribulbar... 30 Retrobulbar... 30 Sub-Tenon s... 31 OPHTHALMIC CANNULAS (continued) Capsulotomy Capsulorhexis Cystotomes... 31 Formed Cystotomes... 31 Straight Cystotomes... 32 Capsule Polishing Capsule Polishers... 32 Cortex Removal Cortex Aspiration... 33 J-Shape... 33 Hydrodissection Hydrodissector/Hydrodelineator... 34 Irrigation/Air Injection Anterior Chamber Irrigation... 35 Viscoelastic Injection... 35 Nucleus Removal Viscoelastic Expression... 36 Oculoplastic Lacrimal Irrigation... 36 Vitreoretinal Subretinal Fluid... 37 Miscellaneous Stromal Puncture... 37 ULTRAPLUG PUNCTAL PLUGS Dry Eye Management UltraPlug Punctal Plugs, Silicone... 38 UltraPlug Punctal Plugs, Extended Wear Synthetic Absorbable... 38 UltraPlug Punctal Plugs, Collagen Absorbable... 39 UltraPlug Punctal Plugs, Evaluation/Insertion Products... 39 UltraPlug Punctal Plug Education Materials... 40 SPECIALTY PRODUCTS UltraFit UltraFit Trephines... 41 UltraGlide Sutures... 42 Protective Eyewear Easy Shield Adhesives... 43 Eye Garter Aluminum Eye Shields... 43 Eye Garter Plastic Eye Shields... 43 Eye Garter Eye Shield Covers... 43 PRODUCT INDEX Product Codes: Listed in alphanumeric order... 44 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010. KNIVES SUTURES CANNULAS PUNCTAL PLUGS SPECIALTY PRODUCTS

Guarded KNIVES The Protection You Want. The Precision You Need. Guarded sheath is designed to eliminate or minimize sharps injuries Features quality Sharpoint blades Ergonomic grip is designed for precise control and comfort Evaluate today as part of your OSHA Exposure Control Plan (EPC) The SharpGuard Guarded Knife features our top-quality Sharpoint blade with the security of a sliding protective sheath. They are available in a wide variety of blade styles including paracentesis, slit, clear corneal and cresent designs. 5 per box. Knife Description 72-1501G 15 Stab, straight, guarded 72-2763G 2.75mm Clear Corneal, angled, double-bevel, guarded 72-2863G 2.85mm Clear Corneal, angled, double-bevel, guarded 72-2231G 2.2mm Slit angled, double-bevel, guarded 72-2431G 2.4mm Slit angled, double-bevel, guarded 72-2561G 2.5mm Slit angled, bevel-up, guarded 72-2661G 2.65mm Slit angled, bevel-up, guarded 72-2761G 2.75mm Slit angled, bevel-up, guarded 72-2861G 2.85mm Slit angled, bevel-up, guarded 72-2961G 3.0mm Slit angled, bevel-up, guarded 72-3261G 3.2mm Slit angled, bevel-up, guarded 74-1010G 2.0mm Crescent, angled, bevel-up, guarded 78-2010G 1.1mm ClearPort paracentesis, angled, guarded Directions For Use 1 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Paracentesis Incision ClearPort Paracentesis Knives Sharpoint ClearPort knives are designed to create consistent, accurate and self-sealing paracentesis incisions. 6 per box. KNIVES 78-2510 0.6mm Angled 78-2310 0.8mm Angled 78-2010 1.1mm Angled 78-2010G 1.1mm Angled* 78-2019 1.4mm Angled, 1.0mm indicator line *Features SharpGuard Guarded Handle Stab Knives Sharpoint stab knives are heat-tempered to provide a strong, true point for easy penetration during initial stab incisions. 6 per box. 72-1501 72-1502 15 Straight 72-1501G 15 Straight* 72-1591 15 Right angled 72-2201 72-2202 22.5 Straight 72-3001 72-3002 30 Straight 72-4501 72-4502 45 Straight *Features SharpGuard Guarded Handle 72-1531 72-1532 15 3.0mm Straight restricted blade depth 72-1551 72-1552 15 5.0mm Straight restricted blade depth 72-3036 30 3.5mm Straight restricted blade depth 72-1001 1.0mm Paracentesis, straight, single bevel 2

Groove & Limbal Relaxation Incision KNIVES Precision Depth Knives Sharpoint precision depth knives are designed to create groove and limbal relaxing incisions. Single formed design ensures precision accuracy. Dual cutting edges allow for incisions in left or right directions. 6 per box. 72-0303 300 µm Straight, full handle 72-3503 350 µm Straight, full handle 72-0503 500 µm Straight, full handle 72-5503 550 µm Straight, full handle 72-6003 600 µm Straight, full handle Restricted Depth Knives Sharpoint restricted depth knives are designed to create groove and limbal relaxing incisions. Single formed design ensures precision accuracy. Dual cutting edges allow for incisions in left or right directions. 6 per box. 72-0301 300 µm Straight, full handle 72-0401 450 µm Straight, full handle 3 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Phaco Incision Knives KNIVES IQ Geometry Slit Knives, Bevel-Up Sharpoint IQ Geometry slit knives feature an innovative cutting edge that engages the tissue at two contact points. This thinner blade design results in a reduction in penetration force. 6 per box. 72-1540 1.5mm Angled, full handle, bevel-up 72-2040 2.0mm Angled, full handle, bevel-up 72-2240 2.25mm Angled, full handle, bevel-up 72-2540 2.5mm Angled, full handle, bevel-up 72-2640 2.65mm Angled, full handle, bevel-up 72-2740 2.75mm Angled, full handle, bevel-up 72-2840 2.85mm Angled, full handle, bevel-up 72-3040 3.0mm Angled, full handle, bevel-up 72-3240 3.2mm Angled, full handle, bevel-up IQ Geometry ClearTrap Knives, Bevel-Up Sharpoint IQ Geometry ClearTrap knives feature an innovative cutting edge that engages the tissue at two contact points. This thinner blade design results in a reduction in penetration force and the trapezoid design, along with patented width indicator lines, provides a phaco and implant knife in one. 6 per box. 77-1214 1.2-1.4mm Angled, full handle, width indicator 77-1517 1.5-1.7mm Angled, full handle, width indicator 77-1725 1.7-2.2-2.5mm Angled, full handle, width indicator 77-2723 2.75-3.0mm Angled, full handle, width indicator 77-2724 2.75-3.2mm Angled, full handle, width indicator 77-2824 2.85-3.2mm Angled, full handle, width indicator 4

Clear Corneal Phaco Incision KNIVES Superior Wound Architecture Tapered bevels are designed to bend and incise tissue, resulting in a straight incision that is more self-sealing. Blade Profile Thinner blade is designed for minimal effect on astigmatism, and to promote re-epithelialization. Short blade length reduces risk of induced trauma. Unique Patented Width/Depth Indicators 1.5mm 1.75mm and 2.0mm act as visual reference when changing planes during an incision. Clear Corneal Knife - Top View Clear Corneal Knife - Bottom View Clear Corneal Knives, Double-Bevel Sharpoint Clear Corneal knives feature tapered facet cutting edges designed to compensate for corneal curvature, creating exact linear incisions. The unique thin blade design and consistent sharpness creates incisions with virtually no tissue drag or distortion. Patented incision width/depth indicators (1.5mm, 1.75mm, 2.0mm) are visible on each blade. 6 per box. 72-1361 1.3mm Angled, double-bevel, 1.0mm width indicator 72-1661 1.6mm Angled, double-bevel, 1.4mm width indicator 72-2663 2.65mm Angled, double-bevel, width/depth indicators 72-2763 2.75mm Angled, double-bevel, width/depth indicators 72-2763G 2.75mm Angled, double-bevel, width/depth indicators* 72-2863 2.85mm Angled, double-bevel, width/depth indicators 72-2863G 2.85mm Angled, double-bevel, width/depth indicators* 72-3061 3.0mm Angled, double-bevel, width/depth indicators 72-3263 3.2mm Angled, double-bevel, width/depth indicators *Features SharpGuard Guarded Handle Clear Corneal Knives, Double-Bevel, Parallel Sides Sharpoint Clear Corneal knives with parallel sides feature center cutting edges with side cutting ability. The unique thin blade design and consistent sharpness creates incisions with virtually no tissue drag or distortion. Patented incision width/depth indicators (1.50mm, 1.75mm, 2.00mm) are visible on each blade. 6 per box. 72-2635 2.65mm Angled, double-bevel, width/depth indicators 72-2735 2.75mm Angled, double-bevel, width/depth indicators 72-2835 2.85mm Angled, double-bevel, width/depth indicators 72-3035 3.0mm Angled, double-bevel, width/depth indicators 72-3235 3.2mm Angled, double-bevel, width/depth indicators 5 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Phaco Incision Slit Knives, Bevel-Up Sharpoint angled, bevel up precision slit knives penetrate easily while creating an accurate width incision for optimal fit to the phacoemulsification tip. 6 per box. KNIVES 72-2561 72-2562 2.5mm Angled, bevel-up 72-2561G 2.5mm Angled, bevel-up* 72-2661 72-2662 2.65mm Angled, bevel-up 72-2661G 2.65mm Angled, bevel-up* 72-2761 72-2762 2.75mm Angled, bevel-up 72-2761G 2.75mm Angled, bevel-up* 72-2861 72-2862 2.85mm Angled, bevel-up 72-2861G 2.85mm Angled, bevel-up* 72-2961 72-2962 3.0mm Angled, bevel-up 72-2961G 3.0mm Angled, bevel-up* 72-3261 72-3262 3.2mm Angled, bevel-up 72-3261G 3.2mm Angled, bevel-up* 72-3561 3.5mm Angled, bevel-up 72-5163 5.1mm Angled, bevel-up *Features SharpGuard Guarded Handle Slit Knives, Double-Bevel Sharpoint double-bevel slit knives create accurate width incisions easily with virtually no tissue drag or distortion. 6 per box. 72-2231 2.2mm Angled, double-bevel 72-2231G 2.2mm Angled, double-bevel* 72-2431 2.4mm Angled, double-bevel 72-2431G 2.4mm Angled, double-bevel* 72-2531 2.5mm Angled, double-bevel 72-2631 2.65mm Angled, double-bevel 72-2831 2.8mm Angled, double-bevel 72-2931 3.0mm Angled, double-bevel 72-3231 3.2mm Angled, double-bevel 72-3270 3.2mm 70 Angled, double-bevel 72-3531 3.5mm Angled, double-bevel *Features SharpGuard Guarded Handle 6

Phaco Incision KNIVES Slit Knives, Bevel-Up, Parallel Sides Sharpoint slit knives with parallel sides feature a single bevel design with side cutting ability. 6 per box. 72-2912 72-2913 3.0mm Angled, bevel-up 72-3212 3.2mm Angled, bevel-up Slit Knives, Single-Bevel Sharpoint precision slit knives penetrate easily while creating an accurate width incision for optimal fit to the phacoemulsification tip. 6 per box. 72-2801 2.85mm Straight 72-2901 3.0mm Straight 72-3201 3.2mm Straight 7 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Phaco / Implant Incision Trapezoid Design Yields phaco and implant incisions in one knife Consistency Allows surgeon to enlarge the phaco incision to a consistent, precise width for IOL insertion Wound Integrity Designed to maintain wound integrity by eliminating the implant knife Indicator Lines Patented width indicator lines at the phaco and implant mark aid as a visual reference Implant Indicator Line Phaco Indicator Line KNIVES ClearTrap Trapezoid Clear Corneal / Implant Knives, Bevel-Up Sharpoint ClearTrap knives feature a trapezoid shape design containing patented incision width indicators visible on each blade. The unique thin blade design and consistent sharpness creates incisions with virtually no tissue drag or distortion. 6 per box. 75-1214 1.2-1.4mm Angled, width indicator 75-1517 1.5-1.7mm Angled, width indicator 75-1520 1.5-2.0mm Angled, width indicator 75-1720 1.7-2.0mm Angled, width indicator 75-2522 2.5-2.9mm Angled, width indicator 75-2524 2.5-3.2mm Angled, width indicator 75-2723 2.75-3.0mm Angled, width indicator 75-2724 2.75-3.2mm Angled, width indicator 75-2725 2.75-3.5mm Angled, width indicator 75-2726 2.75-3.75mm Angled, width indicator 75-2824 2.85-3.2mm Angled, width indicator 75-2825 2.85-3.5mm Angled, width indicator 75-2826 2.85-3.75mm Angled, width indicator 75-2925 3.0-3.5mm Angled, width indicator 75-3225 3.2-3.5mm Angled, width indicator 8

Implant Incision KNIVES Pilot Tip Implant Knives, Bevel-Up Sharpoint Pilot Tip implant knives are designed to follow the slit blade incision easily while the cutting edges create a precise opening for lens insertion. 6 per box. Implant Knives, Bevel-Up 76-5361 3.2mm Angled, bevel-up 76-3461 3.5mm Angled, bevel-up 76-3761 3.75mm Angled, bevel-up 76-5161 5.2mm Angled, bevel-up 76-5561 5.5mm Angled, bevel-up 76-6061 6.0mm Angled, bevel-up Sharpoint standard implant knives are designed to widen the initial incision to facilitate lens insertion. 6 per box. 76-4061 4.0mm Angled, bevel-up 76-5261 5.2mm Angled, bevel-up 9 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Crescent Sharptome Crescent Knives Sharpoint Sharptome crescent knives are designed to create a smooth scleral shelf to promote a self-sealing wound. The blade s consistent sharpness virtually eliminates tissue drag and distortion. 6 per box. KNIVES 74-1000 74-5000 2.0mm Straight 74-1010 74-5062 2.0mm Angled, bevel-up 74-1010G 2.0mm Angled, bevel-up* 74-1020 2.0mm Angled, bevel-down 74-1031 2.0mm Angled, double-bevel *Features SharpGuard Guarded Handle Mini-Crescent Knives Sharpoint mini-crescent knives are designed to dissect a smaller scleral shelf. The blade s consistent sharpness virtually eliminates tissue drag and distortion. 6 per box. 74-6910 1.25mm Angled, double-bevel 10

Vitrectomy KNIVES Vitrectomy Knives Sharpoint vitrectomy knives create small, precise access incisions which virtually eliminate wound leaks around probes and other posterior segment instruments. 6 per box. 71-1901 19 gauge Straight 71-2001 20 gauge Straight 71-2301 23 gauge Straight 71-2501 25 gauge Straight 71-2061 20 gauge Angled Spoon Knives, Double-Bevel Specialty Sharpoint spoon knives feature a unique 320 cutting radius and ultra-thin blade to enhance precision cutting capabilities where multi-directional techniques are performed. 6 per box. 74-2261 2.2mm Angled, double-bevel 74-3061 3.0mm Angled, double-bevel 11 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Specialty Knives Sharpoint specialty knives are available in a variety of shapes and sizes for various techniques and procedures. 6 per box. 78-6810 Needle blade, straight, 4.0mm cutting edge KNIVES 78-5700 Scleral blade, straight 78-6600 2.3mm Lamellar blade, angled, bevel-up 78-6900 Micro-blade, straight, double-bevel, sharp all around Blade and Tip Handles Sharpoint stainless steel blade and tip handles are compatible with the threaded tips of Sharpoint blade and tip items. The inner threads are standardized to fit most competitive collets and blades currently available. Sold individually. Handle Description 92-9000 9.5cm Length 92-9003 16.5cm Length 12

Introduction High-quality, consistently sharp needles. Extra sharp cutting edges extending from the point to its widest portion reduce tissue drag Precise, smooth penetration through tissue minimizes trauma Needle channel is fitted to the specific size of the suture material SUTURES How To Use Our Catalog The pages in the suture sections of this catalog will show the following information for each product code. Some of our ophthalmic products feature an expanded chart with detailed measurements (not shown in this sample) to ensure proper needle selection. Needle Description - Contains an illustration of the needle. The Sharpoint needle code is blue, the comparable Alcon needle code is brown, the comparable Ethicon needle code is black, and the comparable Syneture needle code is aqua blue. This section also lists the needle length and shape. Needle Geometry - Type of needle with tip geometry. DermaGlide Material - Color and style of suture. Length - Length in inches/centimenters. DGL13 B0-2 P-3 DX-13 NEEDLE MATERIAL LENGTH SIZE 13mm Undyed Braided 6-0 5-0 4-0 3-0 2-0 0 GD-492N J833G XL833 Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. Quantity - The last character in the Sharpoint product codes denote the quantity per box. GD-493N J834G XL834 Sharpoint product code Ethicon comparable product code Syneture comparable product code Size Grid - Indicates the U.S.P. size for each product code listed. How To Read Our Suture Box Labels Each Sharpoint suture box comes with a color-coded label that provides important details about the sutures contained inside. Color Bar Product Item No. Quantity Material Suture Length Suture Size Lot Number Expiration Date Needle Type / Shape Certified for distribution in Europe 13

Sharpoint Absorbable Sutures Suture Materials Material Material Description BSR Profile Mass Absorption Gut Surgical Gut Plain Gut/Chromic Gut Twisted Plain Chromic Packaged Dry or In Wetting Solution In vivo strength retention: Varies Varies depending upon type of suture (plain vs. chromic) and site of placement PolySyn (glycolic acid) Vicryl Polysorb /Dexon Braided Undyed (clear) Dyed (violet) Comparable Ethicon material Comparable Syneture material In vivo strength retention: 50% at 2 weeks 20% at 3 weeks Essentially complete between 50 and 90 days SUTURES Sharpoint Non-Absorbable Sutures Material Material Description Qualities Polyviolene poly (ethylene-terephthatate) Braided Dyed (green) Uncoated Smooth Easy to handle Good knot security Mersilene Surgidac Nylon Ethilon Monosof /Dermalon Silk Permahand Silk Sofsilk Polyproplyene Prolene Surgipro /Surgilene Undyed (clear) Dyed (blue) (black) Packaged Dry or In Wetting Solution Braided Undyed (white) Dyed (black) Coated Monofiliament Undyed (clear) Dyed (blue) Passes easily through tissue Excellent handling & tying characteristics Inert Easy to handle Passes easily through tissue Comparable Ethicon material Comparable Syneture material 14

Needle Chart UltraGlide Needles Precision Reverse Cutting Needles Sharpoint Alcon Ethicon Syneture Sharpoint Alcon Ethicon Syneture Bicurve BGL5 AU-8 CSB-6 4.88mm DSM7 G-6 HE-6 7mm DGL6 NU-1, CU-1 CS140-6 SE-140-6 6.15mm DSM11 B0-1 P-1, G-1 P-10 DSM13 B0-2 P-3 P-13 11mm 13mm 1/2 Circle HGL5 CU-5 CS160-6 SE-160-6 HGL7 CU-2 CS175-6 5.51mm 6.99mm DSM16 PS-3 P-11 1/2 Circle HSM8 B-2 G-7 16mm 8mm SUTURES DermaGlide Needles Sharpoint Alcon Ethicon Syneture Reverse Cutting Needles Sharpoint Alcon Ethicon Syneture DGL11 B0-1 P-1 DX-11 11mm DS12 C-2 C-1 12mm DGL13 B0-2 P-3, PC-1 DX-13 DGL19 PS-2, PC-5 DX-19 1/2 Circle HGL9 P-2 P-21 HGL16 PS-4, PC-12 DXH-16 13mm 19mm 9mm 16mm DS14 C-3 C-12 DS16 FS-3 C-12 DS18 FS-2 C-13 1/2 Circle HS16 14mm 16mm 18mm 16mm Side Cutting Lancet Needles Taper Point Needles Sharpoint Alcon Ethicon Syneture Sharpoint Alcon Ethicon Syneture Bicurve BSL5 CU-8, AU-8 TG6-C 5.51mm DRM6 BV130-5 MV135-5 5mm 1/8 Circle SSL5 SSL15 5.51mm 14.99mm DR12 P-1, P-5 C-1 CV-1 12mm 1/4 Circle VSL7 C-6 TG100-8 SE100-8 VSP8 T-1 S-29, S-24 SD-1, SS-24 VCL8 R-1 S-14 SS-14 6.6mm 8mm 8.51mm Taper Cutting Needles Sharpoint Alcon Ethicon Syneture DSL6 CU-1, AU-1 TG140-6 SE140-6 DSL7 C-3 TG140-8 SE140-8 6.15mm 6.6mm DRT14 PC-1, PC-5 CC-1 1/2 Circle 14mm 1/2 Circle HSL5 CU-5, AU-5 TG160-6 SE160-6 HSL7 C-4 5.51mm 7mm HRT17 V-5 KV-5 17mm Precision Conventional Cutting Needles Sharpoint Alcon Ethicon Syneture DSCM13 PC-1 P-13 13mm DSCM16 PC-3 P-11 16mm 15 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Needle Chart Center Point Spatula Needles Diamond Point Needles Sharpoint Alcon Ethicon Syneture Sharpoint Alcon Ethicon Syneture 1/4 Circle D05 R-1 RD-1 SS-24 8mm DE7 G-6 HE-6 8.13mm Vas Cutting Needles M.E.T. Point Needles Sharpoint Alcon Ethicon Syneture Sharpoint Alcon Ethicon Syneture 1/4 Circle 4mm VVL4 DRM5 Needle Specifications 5mm SUTURES Needle Anatomy Needle Point Wire Diameter Chord Length Needle Body Needle Length Needle Shapes Needle Radius Swage Needle Terminology Chord Length: Straight line distance from the point of a curved needle to the swage. Needle Length: Distance measured along the circumference of the needle, from the point to the swage. Needle Shapes: Different surgeries or surgical techniques demand different needle shapes. Needles are available in the following shapes: straight, bicurve, 1/8 circle, 1/4 circle, 3/8 circle and 1/2 circle. Point: The sharpened part of the needle that first penetrates the tissue. Radius: Distance from the center of an imaginary circle that would be formed by the needle if it were round. The radius is measured to the middle of the needle wire. Swage: Connection point of the suture and the needle. Micro teeth grip the suture material and prevent it from slipping out. Wire Diameter: Gauge or thickness of the needle wire originally used to form the needle body. Straight Bicurve 1/8 Circle 1/4 Circle 1/2 Circle 16

Plain Gut DermaGlide NEEDLE MATERIAL LENGTH SIZE DGL11 B0-1 P-1 DX-11 11mm Plain Gut 10-0 9-0 8-0 7-0 6-0 5-0 4-0 BD-660N SUTURES Precision Conventional Cutting DSCM13 PC-1 P-13 NEEDLE MATERIAL LENGTH SIZE 13mm Plain Gut 10-0 9-0 8-0 7-0 6-0 5-0 4-0 BA-2711N 1916G XG1916 Precision Reverse Cutting NEEDLE MATERIAL LENGTH SIZE DSM11 B0-1 P-1 P-10 DSM11 B0-1 P-1 P-10 11mm Plain Gut 12 /30cm 11mm Plain Gut 10-0 9-0 8-0 7-0 6-0 5-0 4-0 BA-2698N BA-2415N 774G SG1645 BA-770N 770G SG1645 Chromic Gut DermaGlide NEEDLE MATERIAL LENGTH SIZE DGL13 B0-2 P-3 DX-13 13mm Chromic Gut 10-0 9-0 8-0 7-0 6-0 5-0 4-0 CD-687DA Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 17 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

PolySyn (Polyglycolic Acid) DermaGlide NEEDLE MATERIAL LENGTH SIZE 9-0 8-0 7-0 6-0 5-0 4-0 3-0 DGL11 B0-1 P-1 DX-11 11mm Undyed Braided 8 /20cm GD-489S DGL13 B0-2 P-3 DX-13 13mm Undyed Braided 8 /20cm GD-492S GD-492N J833G XL833 GD-493S GD-493N J834G XL834 GD-494S GD-494N J835G XL835 SUTURES DGL19 19mm Undyed Braided 8 /20cm GD-794N GD-495S GD-495N GD-496S GD-496N GD-497N PS-2 DX-19 J822G XL822 J823G XL823 J824G XL824 HGL9 P-2 P-21 9mm 1/2 Circle Undyed Braided GD-503N J503G SL1644G GD-504N J504G SL1645G HGL16 PS-4 P-24 16mm 1/2 Circle Undyed Braided GD-506N J506G SL5632G GD-507N J507G SL5633G Diamond Point NEEDLE MATERIAL LENGTH SIZE 10-0 9-0 8-0 7-0 6-0 5-0 4-0 DE7 8.13mm 3/8Circle Violet Braided 12 /30cm GA-446N J551G L1551K G-6 HE-6 Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 18

PolySyn (Polyglycolic Acid) SUTURES Precision Conventional Cutting DSCM13 PC-1 P-13 DSCM16 PC-3 PC-11 DSM11 B0-1 PS-1 P-10 DSM13 B0-2 P-3 P-13 DSM16 PS-3 P-11 NEEDLE MATERIAL LENGTH SIZE 13mm Undyed Braided 16mm Undyed Braided Precision Reverse Cutting 10-0 9-0 8-0 7-0 6-0 5-0 4-0 NEEDLE MATERIAL LENGTH SIZE 11mm Undyed Braided 13mm Violet Braided 16mm Undyed Braided GA-834N J834G SL5687G GA-845N VR835 SL5686G 9-0 8-0 7-0 6-0 5-0 4-0 3-0 GA-499N J499G XL843 GA-490N J490G SL1689G GA-500N J500G SL5626G GA-463N J464G SL5691G GA-0508N SL5621 Side Cutting Lancet NEEDLE DESCRIPTION MATERIAL LENGTH SIZE VSL7 C-6 TG100-8 SE-100-8 VCL8 1/4 Circle Radius 3.94mm Length 6.60mm Chord 5.89mm Curvature 94 Wire.20mm 1/4 Circle Radius 4.36mm Length 8.51mm Chord 7.24mm Curvature 112 Wire.33mm Violet Braided Undyed Braided 9-0 8-0 7-0 6-0 5-0 GA-544N J544G L1750K GA-670N J670G L1670 GA-671N J671G L1669 R-1 S-14 SS-14 1/4 Circle Radius 4.32mm Length 8.51mm Chord 7.28mm Curvature 109 Wire.34mm Violet Braided 8 /20cm GA-590N J590G L1740K GA-570N J570G Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 19 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Side Cutting Lancet VSP8 NEEDLE DESCRIPTION MATERIAL LENGTH SIZE 9-0 8-0 7-0 6-0 5-0 1/4 Circle Radius 3.97mm GA-556N Length 7.62mm Chord 6.50mm 12 /30cm J556G Curvature 110 Wire.20mm L1446K Violet Braided GA-555N J555G T1 S-29, S-24 SD-1, SS-24 1/4 Circle Radius 5.16mm Length 8.00mm Chord 7.29mm Curvature 90 Wire.30mm 12 /30cm GA-552N J552G L1742K GA-553N J553G L1785K SUTURES Side Cutting Lancet VSP8 T1 S-24 SS-14 Polyviolene (Polyester) NEEDLE MATERIAL LENGTH SIZE 8mm 1/4 Circle White Braided Uncoated 9-0 8-0 7-0 6-0 5-0 4-0 3-0 FA-893NC W893 Taper Cutting HRT17 V-5 KV-5 NEEDLE MATERIAL LENGTH SIZE 17mm 1/2 Circle Green Braided 12 /30cm Loop 9-0 8-0 7-0 6-0 5-0 4-0 3-0 FC-2600N FC-2678N X872H Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 20

Center Point Spatula DO5 RD-1 SS-24 Nylon NEEDLE DESCRIPTION MATERIAL LENGTH SIZE 1/4 Circle Radius 5.10mm Length 8.00mm Chord 6.00mm Curvature 90 Wire.33mm 8-0 7-0 6-0 5-0 AA-2684N 749G N2781 SUTURES DermaGlide DGL11 B0-1 P-1 DX11 DGL13 B0-2 P-3 DX13 DGL19 PC-5 DX19 HGL16 PC-12 DXH16 NEEDLE MATERIAL LENGTH SIZE 11mm 13mm 19mm 16mm 1/2 Circle 8 /20cm 8 /20cm 8 /20cm 10-0 9-0 8-0 7-0 6-0 5-0 4-0 AD-1696 1696G XN1696 AD-697S AD-697N 697G SN3697 AD-1698S AD-1698 1698G XN1856 AD-698S AD-698N 698G XN1855 AD-1666S AD-1666 1666G SN5666G AD-1661 1661G SN5661G AD-699S AD-699N 699G XN1854 AD-1667S AD-1667 1667G SN5667G AD-1662 1662G SN5662G Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 21 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Precision Conventional Cutting DSCM16 NEEDLE MATERIAL LENGTH SIZE 16mm 10-0 9-0 8-0 7-0 6-0 5-0 4-0 AA-2317N 1866G SN1966 AA-2193N 1865G SN3965 AA-2194N 1864G SN1964 PC-3 PC-11 Pliable AA-2428N 1965G SN3965 Precision Reverse Cutting DSM11 B0-1 P-1 P-10 DSM13 NEEDLE MATERIAL LENGTH SIZE 9-0 8-0 7-0 6-0 5-0 4-0 3-0 11mm 13mm AA-2316N 1866G SN3686 AA-2176N 1698G SN5696G AA-2177N 698G SN5698G AA-2178N 699G SN5699G SUTURES B0-2 P-3 P-13 Clear AA-691N 691G SN5691G DSM16 PS-3 P-11 16mm AA-2181N 1668G SN5668G Side Cutting Lancet NEEDLE DESCRIPTION MATERIAL LENGTH SIZE BSL5 CU-8, AU-8 TG6-C Bicurve Length 4.88mm Curvature 90/50 Radius 1.52/2.79mm Chord 3.71mm Wire.15mm Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 6 /15cm 12 /30cm 11-0 10-0 9-0 8-0 AA-2687N 7799G AA-2522N 22

Nylon SUTURES Side Cutting Lancet NEEDLE DESCRIPTION MATERIAL LENGTH SIZE BSL5 CU-8, AU-8 TG6-C DSL6 CU-1, AU-1 TG140-6 DSL6 CU-1, AU-1 TG140-6 DSL7 TG140-8 DSL7 C-3 TG140-8 HSL5 CU-5, AU-5 TG160-6 HSL5 CU-5, AU-5 TG160-6 HSL7 C-4 Bicurve Length 4.88mm Curvature 90/50 Radius 1.52/2.79mm Chord 3.71mm Wire.15mm Radius 2.54mm Length 6.15mm Chord 4.83mm Curvature 135 Wire.15mm Radius 2.54mm Length 6.15mm Chord 4.83mm Curvature 135 Wire.15mm Radius 2.79mm Length 6.60mm Chord 5.26mm Curvature 131 Wire.20mm Radius 2.79mm Length 6.60mm Chord 5.26mm Curvature 131 Wire.20mm 1/2 Circle Radius 2.03mm Length 5.51mm Chord 4.07mm Curvature 150 Wire.15mm 1/2 Circle Radius 2.03mm Length 5.51mm Chord 4.07mm Curvature 150 Wire.15mm 1/2 Circle Radius 2.29mm Length 7.04mm Chord 4.71mm Curvature 175 Wire.15mm 8 /20cm 12 /30cm 6 /15cm 12 /30cm 12 /30cm 12 /30cm 12 /30cm 6 /15cm 12 /30cm 6 /15cm 12 /30cm 12 /30cm 11-0 10-0 9-0 8-0 AA-2524N AA-2525N 7799G AA-2683N AA-2533N AA-2518N 7770G AA-2532N AA-2516N 7718G AA-2534N AA-2510N AA-2521N 7757G AA-0228N 7756G N2756K AA-2519N AA-2517N 7717G AA-2681N AA-2523N 7760G Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 23 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

UltraGlide BGL5 AU-8 CSB-6 DGL6 NU-1, CU-1 CS140-6 SE-140-6 DGL6 NU-1, CU-1 CS140-6 SE-140-6 HGL5 CU-5 CS160-6 SE-160-6 HGL5 CU-5 CS160-6 SE-160-6 HGL7 CU-2 CS175-8 NEEDLE DESCRIPTION MATERIAL LENGTH SIZE Bicurve Length 4.88mm Curvature 90/50 Radius 1.52/2.79mm Chord 3.71mm Wire 1.5mm Radius 2.54mm Length 6.15mm Chord 4.82mm Curvature 135 Wire.15mm Radius 2.54mm Length 6.15mm Chord 4.82mm Curvature 135 Wire.15mm 1/2 Circle Radius 2.03mm Length 5.51mm Chord 4.06mm Curvature 160 Wire.15mm 1/2 Circle Radius 2.03mm Length 5.51mm Chord 4.06mm Curvature 160 Wire.15mm 1/2 Circle Radius 2.29mm Length 6.99mm Chord 4.57mm Curvature 175 Wire.15mm 12 /30cm 4 /10cm 12 /30cm 4 /10cm 6 /15cm 12 /30cm 12 /30cm 11-0 10-0 9-0 8-0 AA-2713N 9016G AA-2675N 9007G AA-2673N 9060G AA-2627N 9003G AA-2674N 9061G AA-2712N 9001G AA-2626N 9000G AA-2714N 9032G SUTURES VAS Cutting NEEDLE DESCRIPTION MATERIAL LENGTH SIZE VVL4 1/4 Circle 100 Microns Length 4mm Curvature 109 5 /13cm 11-0 10-0 9-0 8-0 AA-2819N Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 24

Silk Precision Reverse Cutting NEEDLE MATERIAL LENGTH SIZE 10-0 9-0 8-0 7-0 6-0 5-0 4-0 DSM7 G-6 HE-6 7mm Braided 12 /30cm DA-2680N 768G S1768K SUTURES DSM7 G-6 HE-6 DSM11 B0-1 P-1 P-10 7mm Braided 11mm Braided DA-0191N 7733G S1768K DA-2622N 769G DA-0187N 639G S51639G DSM11 11mm Braided DA-0188N 780G S1750 B0-1 P-1 P-10 HSM8 B-2 G-7 HE-7 8mm 1/2 Circle Braided DA-765N 765G S1765 Reverse Cutting NEEDLE MATERIAL LENGTH SIZE DS12 C-2 C-1 DS16 FS-3 C-12 DS18 FS-2 C-13 HS16 12mm Braided 16mm 18mm Braided Braided 16mm 1/2 Circle Braided 9-0 8-0 7-0 6-0 5-0 4-0 3-0 DC-0372N S1172 DC-0374N S1173 DC-0388N DC-0388D 1678H SS5678 DC-1427D 682G SS682G DC-0239N 739G SS686 DC-0210N DC-0210D 683G SS683G DC-0389N DC-0157N DC-0157D 1679H SS694 DC-2460N Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 25 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Side Cutting Lancet VSP8 NEEDLE DESCRIPTION MATERIAL LENGTH SIZE T-1 S-24 SS-24 DSL6 CU-1, AU-1 TG140-6 SE-140-6 DSL7 1/4 Circle Radius 5.08mm Length 8mm Chord 7.24mm Curvature 90 Wire.35mm Radius 2.54mm Length 6.15mm Chord 4.83mm Curvature 135 Wire.15mm Radius 2.79mm Length 6.60mm Chord 5.26mm Curvature 131 Wire.20mm Braided Blue Braided Virgin Braided 12 /30cm 9-0 8-0 7-0 6-0 DA-2552N DA-2526N 599G DA-2527N 7733G S1768K DA-2624N 1780G S2780 SUTURES C-3 TG140-8 SE-140-8 Blue Braided Virgin DA-2550N Taper Cutting DRT14 PC-1, PC-5 CC-1 NEEDLE MATERIAL LENGTH SIZE 14mm Braided Not sold in U.S.A. 10-0 9-0 8-0 7-0 6-0 5-0 4-0 DC-2530N 7729G DC-2531N K945G Taper Point DR12 P-1, P-5 C-1 CV-1 NEEDLE MATERIAL LENGTH SIZE 12mm Braided Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 10-0 9-0 8-0 7-0 6-0 5-0 4-0 DC-2150N 707G VS802 DC-2515N 7734G 26

Polypropylene DermaGlide NEEDLE MATERIAL LENGTH SIZE 9-0 8-0 7-0 6-0 5-0 4-0 3-0 DGL11 11mm Blue 8 /20cm JD-8697S JD-8697 JD-8694 SUTURES B0-1 P-1 DX11 DGL13 13mm Blue 8 /20cm 8697G JD-8695S JD-8695 JD-8698S JD-8698 JD-8699S JD-8699 B0-2 P-3 DX13 8695G/8617G SP5695G 8698G/8618G SP5698G 8699G/8619G SP5699G DGL19 19mm Blue 8 /20cm JD-8686S JD-8686 JD-8682S JD-8682 JD-8687 PC-5 DX19 8686G/8630G SP5686G 8682G/8631G SP5682G 8687G/8632G SP5687G M.E.T. Point NEEDLE DESCRIPTION MATERIAL LENGTH SIZE 11-0 10-0 9-0 8-0 DRM5 100 Microns Length 5mm Curvature 135 Blue 5 /13cm JA-2123N Precision Conventional Cutting NEEDLE MATERIAL LENGTH SIZE 10-0 9-0 8-0 7-0 6-0 5-0 4-0 DSCM13 B0-2 PC-1 P-13 13mm Blue JA-2448N DSCM16 PC-3 P-11 16mm Blue JA-2451N JA-2452N Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 27 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Precision Reverse Cutting DSM11 B0-1 P-1 P-10 DSM13 B0-2 P-3 P-13 DSM16 PS-3 P-11 NEEDLE MATERIAL LENGTH SIZE 11mm 13mm 16mm Reverse Cutting DS14 C-3 C-12 Blue Blue Blue 9-0 8-0 7-0 6-0 5-0 4-0 3-0 JA-2468N 8696G SP1696G JA-2440N 8697G SP5697G JA-2442N 8680G SP5680G NEEDLE MATERIAL LENGTH SIZE 14mm Blue JA-2200N 8698G SP5698G JA-2443N 8681G SP5681G 10-0 9-0 8-0 7-0 6-0 5-0 4-0 JC-1712N SP660G JC-1713N SUTURES Side Cutting Lancet NEEDLE DESCRIPTION MATERIAL LENGTH SIZE SSL5 1/8 Circle Radius 6.35mm Length 5.51mm Chord 5.35mm Curvature 50 Wire.15mm Blue 2 /5cm 10-0 9-0 8-0 7-0 JA-2560N SSL15 1/8 Circle Radius 16.51mm Length 14.99mm Chord 14.49mm Curvature 50 Wire.23mm Blue 3 /7.5cm 6 /15cm JA-2559N JA-2558N DSL6 CU-1, AU-1 TG140-6 HSL5 CU-5, AU-5 TG160-6 SE-160-6 Radius 2.54mm Length 6.15mm Chord 5.35mm Curvature 135 Wire.15mm 1/2 Circle Radius 2.03mm Length 5.51mm Chord 4.07mm Curvature 150 Wire.15mm Blue Blue 12 /30cm 12 /30cm JA-2528N 1710G JA-2529N 7794G PZ756K Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 28

Taper Point DRM6 BV-130-5 MV-135-5 Polypropylene NEEDLE MATERIAL LENGTH SIZE 6mm Blue 5 /13cm 10-0 9-0 8-0 7-0 6-0 5-0 4-0 JA-2775N 2775G SUTURES UltraGlide HGL5 CU-5 CS-160-6 SE-160-6 NEEDLE MATERIAL LENGTH SIZE 5.51mm 1/2 Circle Blue 6 /15cm 10-0 9-0 8-0 7-0 6-0 5-0 4-0 JA-2625N Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 29 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Anesthesia Peribulbar To administer the anesthetic into the orbit just posterior to the lids. Anesthetic diffuses into the muscle cone. Item Number Description 3513 Peribulbar 23g x 1-1/4 in. (.60 x 32mm), Atkinson point 585007 3517 Peribulbar 25g x 1-1/4 in. (.50 x 32mm), Atkinson point 585108 Item Number Description 3514 Peribulbar 25g x 7/8 in. (.50 x 32mm), Atkinson point 585108 Retrobulbar To administer the anesthetic deep behind the globe into the muscle cone. CANNULAS Item Number Description 3511 23g x 1-1/2 in. (.60 x 38mm), Atkinson point 581638 3512 25g x 1-1/2 in. (.50 x 38mm), Atkinson point 581637 Item Number Description 3516 25g x 1-1/2 in. (.50 x 38mm), Sharp point 581275 Corresponding BD code listed in italics under Item Number. 30

Anesthesia Sub-Tenon s To administer anesthetic agents into the posterior sub-tenon s space. Item Number Description 3520 19g x 1 in. (1.10 x 25mm) Curved to a radius of 30mm and flattened to.65mm 585176 Capsulorhexis Cystotomes Capsulotomy Features an angled tip designed for push or pull cutting during Continuous Curvilinear Capsulotomies (CCC). CANNULAS Item Number Description 3012 Formed Irrigating Cystotome 27g x 5/8 in. (.40 x 16mm) Angled tip (10mm from end). 585042 Specifically designed for capsulorhexis (continuous curvilinear tear) techniques Formed Cystotomes Designed to conform to the convexity of the crystalline lens. Also allows for easier access to full anterior capsule. Item Number Description 3002 Formed Irrigating Cystotome 25g x 5/8 in. (.50 x 16mm) (Pearce) 581610 3003 Formed Irrigating Cystotome 27g x 5/8 in. (.40 x 16mm) 581618 3006 Formed Irrigating Cystotome 30g x 5/8 in. (.30 x 16mm) 581630 Corresponding BD code listed in italics under Item Number. 31 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Item Number Description 3009 Short Irrigating Cystotome 25g x 5/8 in. (.50 x 16mm), for capsulotomy or capsulorhexis 585004 on deep-set eyes Straight Cystotomes Provides direct approach into the anterior capsule. Item Number Description 3004 Straight Irrigating Cystotome 27g x 5/8 in. (.40 x 16mm) 585017 3005 Straight Irrigating Cystotome 25g x 5/8 in. (.50 x 16mm) 585617 Capsule Polishers Capsule Polishing Used for polishing and cleaning the posterior capsule and all equatorial regions in preparation for insertion of the IOL. CANNULAS Item Number Description 3101 Capsule Polisher with a roughened tip 21g x 7/8 in. 3101(.80 x 22mm), 12.5mm bend from 581604 tip. A popular capsule polisher with a.3mm top port opening for gentle control of the flow of irrigation to remove debris from the posteriorcapsule. Item Number Description 3105 Capsule Polisher with a.33mm top port, roughened tip, 23g x 5/8 in. (.60 x 17mm), 581605 angled 30, 8mm bend from tip. Corresponding BD code listed in italics under Item Number. 32

Capsule Polishing Capsule Polishers Used for polishing and cleaning the posterior capsule and all equatorial regions in preparation for insertion of the IOL. Item Number Description 3107 Flexible Tip Polisher 27g x 7/8 in. (.40 x 22mm). Angled 45, 7mm bend from end, 585005 10mm sleeve,.50mm open ended port. 3108 Flexible Tip Polisher 23g x 7/8 in. (.60 x 22mm). Angled 45, 9mm bend from end, 585121 12mm sleeve, (With squeegee). The silicone squeegee provides an additional cleaning edge to remove cortical debris and to prepare the capsule for IOL insertion. Cortex Aspiration Cortex Removal CANNULAS For removing cortical debris that remains after the nucleus has been removed from the capsular bag. Item Number Description 3209 Thinwall Cannula, 23g x 5/8 in. (.60 x 16mm).4mm top port. 585193 J-Shape For removing difficult cortex and/or to hydrodissect at the 12 o clock position. Also useful for retracting iris. Item Number Description 3202 J-Shaped Cannula, 25g x 7/8 in. (.50 x 22mm), open ended port. 585003 Corresponding BD code listed in italics under Item Number. 33 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Hydrodissector / Hydrodilineator Hydrodissection For separating the nucleus from the posterior capsule and all cortical attachments. Also for separating and softening the central hard nucleus priorto phacoemulsification. Item Number Description 3423 Nucleus Hydrodissector curved, 27g x 7/8 in. (.40 x 22mm). The flattened tip design allows 585155 for smooth insertion and permits a fanlike distribution of fluid for easier separation of the nucleus. Item Number Description 3424 Nucleus Hydrodissector, 25g x 7/8 in. (.50 x 22mm), 7mm bend from tip. The flattened 585037 tip design allows for smooth insertion and permits a fanlike distribution of fluid for easier separation of the nucleus. Item Number Description 3425 Nucleus Hydrodissector, J-Shaped, 25g x 1 in. (.50 x 25mm). The J-Shaped flattened tip is 585102 designed to provide hydrodissection between the 10 & 2 o clock position. CANNULAS Item Number Description 3428 Micro J-Shape Hydrodissector, 27g x 7/8 in. (.40 x 22mm). The Micro J-Shaped flattened 585029 tip allows for easy insertion under the capsule. Item Number Description 3429 Cortical Cleaving Hydrodissector, 27g x 7/8 in. (.40 x 22mm). Angled 45, 11mm bend from 585193 tip. To cleave cortex from the capsular bag. Flattened tip design allows for smooth insertion and permits a fanlike distribution of fluid for easier separation of the nucleus. Corresponding BD code listed in italics under Item Number. 34

Anterior Chamber Irrigation Irrigation / Air Injection For maintaining the anterior chamber during surgery, and keeping the cornea moist. May be used to inject or remove BSS, viscoelastics, air, or intraocularmedications. The tip of each cannula is specially rounded to provide safe insertion into the anterior chamber. Item Number Description 3400 Irrigating Cannula 20g x 7/8 in. (.90 x 22mm), 8mm from bend to tip. 3401 Irrigating Cannula 21g x 7/8 in. (.80 x 22mm), 8mm from bend to tip. 581281 3402 Irrigating Cannula 25g x 7/8 in. (.50 x 22mm), 8mm from bend to tip. 581639 3403 Irrigating Cannula 27g x 7/8 in. (.40 x 22mm), 8mm from bend to tip. 585026 3404 Irrigating Cannula 23g x 7/8 in. (.60 x 22mm), 8mm from bend to tip. 585009 CANNULAS Item Number Description 3405 Irrigating Cannula 30g x 7/8 in. (.30 x 22mm), 5mm from bend to tip. 581273 3406 Irrigating Cannula 27g x 7/8 in. (.40 x 22mm), 5mm from bend to tip. 581280 Item Number Description 3407 Irrigating Cannula 19g x 1 in. (1.1 x 25mm), 7mm from bend to tip - washout. 585040 V-Cann Viscoelastic Injection To inject viscoelastic prior to capsulorhexis, phaco, IOL insertion or in the event of an anterior vitrectomy. Corresponding BD code listed in italics under Item Number. Item Number Description 3412 Viscoelastic Cannula 25g x 7/8 in. (.50 x 22mm), 8mm from bend to tip. 3416 Viscoelastic Cannula 25g x 7/8 in. (.50 x 22mm), 8mm from bend to tip - thinwall. 3413 Viscoelastic Cannula 27g x 7/8 in. (.40 x 22mm), 8mm from bend to tip. 585026 35 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Nucleus Removal Viscoelastic Expression Curvature of cannula facilitates placement under the nucleus for expression. Angled tip may be used to hook nucleus. Item Number Description 3431 Viscoelastic Expression Cannula 25g x 7/8 in. (.50 x 22mm); Angled 30, 1.8mm bend 581090 from end. Designed to express the nucleus with viscoelastic through a capsulorhexis during ECCE. Lacrimal Irrigation Oculoplastic For insertion and irrigation of the nasolacrimal system. Item Number Description 3730 Lacrimal Cannula straight 19g (1.1mm) shaft attached to a 23g Cannula, 1-1/2 in. long 581016 (.60 x 38mm) CANNULAS Item Number Description 3732 Lacrimal Cannula curved 21g shaft, 1-1/2 in. long (.80 x 38mm) 581615 Corresponding BD code listed in italics under Item Number. 36

Vitreoretinal Subretinal Fluid These cannulas enable the retinal surgeon to aspirate fluid that has accumulated in the subretinal space. The soft flexible sleeve permits a delicate entry through the retinal tear or hole. Item Number Description 4021 Subretinal Fluid Cannula 6mm (Grizzard) 20g x 1-3/8 in. (.90 x 35mm) long. Sleeve extends 585021 6mm beyond the end. The longer sleeve allows gentle manipulation of delicate retinal tissue. Item Number Description 4035 Subretinal Fluid Cannula 6mm, Curved tip (Grizzard) 20gx 1-3/8 in. (.90 x 35mm) long. 585035 Sleeve extends 6mm beyond the end. The curved tip allows the surgeon to reach hard-toaccess areas beneath the retina.the longer sleeve allows gentle manipulation of delicate retinal tissue. CANNULAS Item Number Description 4186 Subretinal Fluid Cannula 3mm (Grizzard) 20g x 1-1/4 in. (.90 x 32mm) long. Sleeve extends 585186 3mm beyond the end. The shorter sleeve allows gentle tissue manipulation with greater tip control. Miscellaneous Stromal Puncture For treatment of recalcitrant cases of erosion of the cornea. Cutting tip ensures consistent depth penetration of Bowman s membrane. Item Number Description 3800 Stromal Puncture Needle, 25g x 1 in. (.40 x 25mm), 18mm from bend to tip. Corresponding BD code listed in italics under Item Number. 37 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

UltraPlug Silicone Punctal Plugs UltraPlug Punctal Plugs Inserted into the punctal opening to block tear drainage through the canaliculus, silicone plugs provide long-term relief of dry eye symptoms, and enable the eye to retain more if its own natural tears: Low-profile cap design virtually eliminates foreign body sensation Flexibility of cap design facilitates easy removal with jeweler s forceps, if necessary Individually packaged and preloaded on a sterile, disposable inserter / dilator Manufactured from soft silicone utilizing a single piece mold design for greater patient comfort Enlarged detail of inserter Item Number PPLUG4 PPLUG5 PPLUG6 PPLUG7 PPLUG8 Description 0.4mm plug / inserter (2 / box) 0.5mm plug / inserter (2 / box) 0.6mm plug / inserter (2 / box) 0.7mm plug / inserter (2 / box) 0.8mm plug / inserter (2 / box) UltraPlug Extended Wear Synthetic Absorbable Punctal Plugs Inserted into the punctal opening to block tear drainage through the canaliculus, synthetic absorbable plugs provide extended temporary relief of dry eye symptoms: Indicated for use in the treatment of Dry-Eye Syndrome and the dry eye components of various ocular surface diseases May be used after ocular surgery to prevent dry eye related complications Ideal for post-op dry eye management of LASIK patients Treatment option for seasonal allergy patients experiencing dry eye symptoms May be beneficial for contact lens patients experiencing dry eye related symptoms Manufactured from E-Caprolactone-L-Lactide copolymer (PCL) Essentially absorbed within 2-6 months (60-180 days) PUNCTAL PLUGS Item Number EPLUG2 EPLUG3 EPLUG4 Description 0.2mm diameter / 2.0mm length (2 plugs per package / 10 packages per box) 0.3mm diameter / 2.0mm length (2 plugs per package / 10 packages per box) 0.4mm diameter / 2.0mm length (2 plugs per package / 10 packages per box) 38

UltraPlug Punctal Plugs UltraPlug Collagen Absorbable Punctal Plugs Inserted into the punctal opening to block tear drainage through the canaliculus, collagen plugs provide temporary relief of dry eye symptoms: Manufactured from precisely measured premium collagen Used as a diagnostic assessment for permanent punctal occlusion Each individually packaged card contains 6 plugs Item Number C-PLUG2 C-PLUG3 C-PLUG4 C-PLUG-V Description 0.2mm diameter / 2.0mm length (6 plugs per package / 10 packages per box) 0.3mm diameter / 2.0mm length (6 plugs per package / 10 packages per box) 0.4mm diameter / 2.0mm length (6 plugs per package / 10 packages per box) 4 Cards each of 3 different sizes - 0.2, 0.3, 0.4mm diameter / 2.0mm length (6 plugs per package / 10 packages per box) UltraPlug Evaluation / Insertion Products A stepped system of Gauge / Dilator instruments provides a convenient and controlled method for punctal measurement and dilation Available as a non-sterile autoclavable kit Recommended for use exclusively with UltraPlug Punctal Plugs Item Number PAK-101 Description UltraPlug Punctal Gauge / Dilator Set: a set of 3 instruments, 2 sizes on each instrument. First instrument: 0.4mm / 0.5mm, second instrument: 0.6mm/ 0.7mm, third instrument: 0.8mm / 0.9mm. Packaged non-sterile in an autoclavable case PUNCTAL PLUGS Zone-Quick is an easy and accurate system that measures tear volume in just 15 seconds per eye One kit can test up to 50 patients Easy insertion and removal Packaged 50 sterile sets to a box / 2 threads per sets Item Number Z-QUICK Description Phenol red thread tear test strips 39 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

UltraPlug Punctal Plug Educational Materials UltraPlug educational materials for staff and patients in a variety of media Item Number OPG-PM-050 OPG-PM-172 Description PHYSICIAN VIDEO - UltraPlug Punctal Plug - DVD PHYSICIAN VIDEO - UltraPlug Punctal Plug - MPEG OPG-PM-038 UltraPlug Punctal Plug Patient Pamphlet (50 per pack) OPG-PM-091 UltraPlug Punctal Plug Patient Poster (16 x 20 ) PUNCTAL PLUGS 40

UltraFit Trephines (Not available in all countries) UltraFit Trephines The UltraFit trephine product line consists of disposable vacuum trephines, donor punch sets, and short or long handled trephines in sizes ranging from 6.00mm through 9.75mm, in 0.25mm increments. Advanced trephine blade technology provides an exquisitely sharp cutting edge to achieve the critical fit needed for successful cornea transplants. Item Number Description 11840 Coronet Vacuum Trephine - All metal, ergonomic design and ultra sharp blade with cross hairs. Designed for full-penetrating keratoplasty. Sterile. Single use. 1 piece/box. 11850 Coronet Donor Punch Set - Unique design providing precise control and full visualization throughout the procedure. Sterile. Single use. 1 set/box. 11901 X-Hair Trephine - Hand held. Sterile. Single use. 1 piece/box. 11903 Long Handled Trephine - Hand held. Sterile. Single use. 1 piece/box. ITEM CODE DESCRIPTION BLADE SIZES (mm) 6.00 6.25 6.50 6.75 7.00 7.25 7.50 7.75 8.00 8.25 8.50 8.75 9.00 9.25 9.50 9.75 11840 Coronet Vacuum Trephine 11850 Coronet Donor Punch Set 11901 X-Hair Trephine 11903 Long Handled Trephine SPECIALTY PRODUCTS 41 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

UltraGlide Sutures UltraGlide sutures are a perfect choice for corneal transplant procedures, offering the surgeon reliable sharpness, pass after pass. The tip s ultra-sharp point and concave facets ensure precise placement, smooth penetration and dependable strength. Complementing this superior cutting geometry is an innovative lift and cut ramp that counters the corneal tissue s tendency to roll under and follow the needle. An added benefit of this cutting geometry is the ability to bury suture knots more easily. Unique lift and cut design action Reduced tissue drag Effortless penetration with each pass Non-glare finish UltraGlide BGL5 AU-8 CSB-6 DGL6 NU-1, CU-1 CS140-6 SE-140-6 DGL6 NU-1, CU-1 CS140-6 SE-140-6 HGL5 CU-5 CS160-6 SE-160-6 HGL5 CU-5 CS160-6 SE-160-6 HGL7 CU-2 CS175-8 NEEDLE DESCRIPTION MATERIAL LENGTH SIZE Bicurve Length 4.88mm Curvature 90/50 Radius 1.52/2.79mm Chord 3.71mm Wire 1.5mm Radius 2.54mm Length 6.15mm Chord 4.82mm Curvature 135 Wire.15mm Radius 2.54mm Length 6.15mm Chord 4.82mm Curvature 135 Wire.15mm 1/2 Circle Radius 2.03mm Length 5.51mm Chord 4.06mm Curvature 160 Wire.15mm 1/2 Circle Radius 2.03mm Length 5.51mm Chord 4.06mm Curvature 160 Wire.15mm 1/2 Circle Radius 2.29mm Length 6.99mm Chord 4.57mm Curvature 175 Wire.15mm Product numbers are color coded respectively as Sharpoint (blue), Alcon (brown), Ethicon (black), and Syneture (aqua blue). B or N denotes a box of 12; D denotes a box of 36. 12 /30cm 4 /10cm 12 /30cm 4 /10cm 6 /15cm 12 /30cm 12 /30cm 11-0 10-0 9-0 8-0 AA-2713N 9016G AA-2675N 9007G AA-2673N 9060G AA-2627N 9003G AA-2674N 9061G AA-2712N 9001G AA-2626N 9000G AA-2714N 9032G 42 SPECIALTY PRODUCTS

Easy Shield Adhesives * Protective Eyewear Combination of the Fox Style aluminum Easy Shield eye shield with garter and adhesive. Eliminates the need for taping. Item Number G251-25 G252-25 Description Protective Eyewear - Adult, colored cover with adhesive, 140mm (5-1/2 in.) Protective Eyewear - Adult, white cover with adhesive, 140mm (5-1/2 in.) Eye Garter Aluminum Eye Shields * G257-25 Adhesives - Adult/Youth, 140mm (5-1/2 in.). Each pack contains a 7 day supply of replacement adhesives. Easy removal and replacement by patient. Available with and without covers. Fox Style eye shield. Item Number Description G201-50 ** Adult, without cover, 75mm (3 in.) G202-50 ** Adult, assorted color covers, 75mm (3 in.) G202-100RB Adult, royal blue covers, 75mm (3 in.) G203-50 ** Adult, white covers, 75mm (3 in.) G402-50 Pediatric, pink/blue covers, 52mm (2 in.) Eye Garter Plastic Eye Shields * High impact, lightweight polycarbonate shields come with and without covers. Available in adult sizes only. Choice of white, clear or blue plastic. Item Number Description White G301-50 ** Without cover, 67mm (2-5/8 in.) Clear Universal with Holes G701-50 ** Without cover, 73mm (2-7/8 in.) G702-50 ** Assorted color covers, 73mm (2-7/8 in.) G703-50 White covers, 73mm (2-7/8 in.) Blue Plastic G501-50L G501-50R Left without cover, 76mm (3 in.) Right without cover, 76mm (3 in.) SPECIALTY PRODUCTS 43 Eye Garter Eye Shield Covers * Adult / youth size. Item Number G101-50 G101-100RB G102-50 ** * Number to right of hyphen in product code designates quantity. ** Also available in bulk quantities of 500 pieces. This product contains natural rubber latex which may cause allergic reactions. Description Assorted color covers Royal blue covers White covers

OPHTHALMIC KNIVES OPHTHALMIC KNIVES ITEM NO. DESCRIPTION PAGE ITEM NO. DESCRIPTION PAGE 71-1901 Vitrectomy Knife, 19g 11 71-2001 Vitrectomy Knife, 20g 11 71-2061 Vitrectomy Knife, 20g, Angled 11 71-2301 Vitrectomy Knife, 23g 11 71-2501 Vitrectomy Knife, 25g 11 72-0301 Restricted Depth Knife, 300 Micron, Straight 3 72-0303 Precision Depth Knife, 300 Micron, Straight 3 72-0401 Restricted Depth Knife, 450 Micron, Straight 3 72-0503 Precision Depth Knife, 500 Micron, Straight 3 72-1001 1.0mm Paracentesis Knife, Straight 2 72-1361 Clear Corneal Knife, Angled, 1.3mm, 1.0mm Width 5 72-1501 Stab Knife, 15 Degree, Straight 2 72-1501G Guarded Stab Knife, 15 Degree, Straight 1 72-1502 Stab Blade/Tip, 15 Degree, Straight 2 72-1531 Stab Knife, 15 Degree, 3.0mm Restricted Blade Depth Knife 2 72-1532 Stab Blade/Tip, 15 Degree, 3.0mm Restricted Blade Depth 2 72-1540 IQ Geometry Slit Knife, Bevel Up, 1.5mm, Angled 4 72-1551 Stab Knife, 15 Degree, 5.0mm Restricted Blade Depth Knife 2 72-1552 Stab Blade/Tip, 15 Degree, 5.0mm Restricted Blade Depth Knife 2 72-1591 Stab Knife, 15 Degree, Right Angled 2 72-1661 Clear Corneal Knife, 1.6mm, 1.4mm Width 5 72-2040 IQ Geometry Slit Knife, Bevel Up, 2.0mm, Angled 4 72-2201 Stab Knife, 22.5 Degree, Straight 2 72-2202 Stab Blade/Tip, 22.5 Degree, Straight 2 72-2231 Slit Knife, Double Bevel, 2.2mm, Angled 6 72-2231G Slit Knife, Double Bevel, 2.2mm, Angled 6 72-2240 IQ Geometry Slit Knife, Bevel Up, 2.25mm, Angled 6 72-2431 Slit Knife, Double Bevel, 2.4mm, Angled 6 72-2431G Slit Knife, Double Bevel, 2.4mm, Angled 6 72-2531 Slit Knife, Double Bevel, 2.5mm, Angled 6 72-2540 IQ Geometry Slit Knife, Bevel Up, 2.5mm, Angled 4 72-2561 Slit Knife, Bevel Up, 2.5mm, Angled 6 72-2561G Guarded Slit Knife, Bevel Up, 2.5mm, Angled 1 72-2562 Slit Blade/Tip, Bevel Up, 2.5mm, Angled 6 72-2631 Slit Knife, Double Bevel, 2.65mm, Angled 6 72-2635 Clear Corneal Knife, Parallel Sides, 2.65mm, Angled 5 72-2640 IQ Geometry Slit Knife, Bevel Up, 2.65mm, Angled 4 72-2661 Slit Knife, Bevel Up, 2.65mm, Angled 6 72-2661G Guarded Slit Knife, Bevel Up, 2.65mm, Angled 1 72-2662 Slit Blade/Tip, Bevel Up, 2.65mm, Angled 6 72-2663 Clear Corneal Knife, 2.65mm, Angled 5 72-2735 Clear Corneal Knife, Parallel Sides, 2.75mm, Angled 5 72-2740 IQ Geometry Slit Knife, Bevel Up, 2.75mm, Angled 4 72-2761 Slit Knife, Bevel Up, 2.75mm, Angled 6 72-2761G Guarded Slit Knife, Bevel Up, 2.75mm, Angled 1 72-2762 Slit Blade/Tip, Bevel Up, 2.75mm, Angled 6 72-2763 Clear Corneal Knife, 2.75mm, Angled 5 72-2763G Guarded Clear Corneal Knife, 2.75mm, Angled 1 72-2801 Slit Knife, Bevel Up, 2.85mm, Straight 7 72-2831 Slit Knife, Double Bevel, 2.8mm, Angled 6 72-2835 Clear Corneal Knife, Parallel Sides, 2.85mm, Angled 5 72-2840 IQ Geometry Slit Knife, Bevel Up, 2.85mm, Angled 4 72-2861 Slit Knife, Bevel Up, 2.85mm, Angled 6 72-2861G Guarded Slit Knife, Bevel Up, 2.85mm, Angled 1 72-2862 Slit Blade/Tip, Bevel Up, 2.85mm, Angled 6 72-2863 Clear Corneal Knife, 2.85mm, Angled 5 72-2863G Guarded Clear Corneal Knife, 2.85mm, Angled 1 72-2901 Slit Knife, 3.0mm, Straight 7 72-2912 Slit Knife, Parallel Sides, 3.0mm Angled 7 72-2913 Slit Blade/Tip, Parallel Sides, 3.0mm, Angled 7 72-2931 Slit Knife, Double Bevel, 3.0mm, Angled 6 72-2961 Slit Knife, Bevel Up, 3.0mm, Angled 6 72-2961G Guarded Slit Knife, Bevel Up, 3.0mm, Angled 1 72-2962 Slit Blade/Tip, Bevel Up, 3.0mm, Angled 6 72-3001 Stab Knife, 30 Degree, Straight 2 72-3002 Stab Blade/Tip, 30 Degree, Straight 2 72-3035 Clear Corneal Knife, Parallel Sides, 3.0mm, Angled 5 72-3036 Stab Knife, 30 Degree, 3.5mm Restricted Blade Depth Knife 2 72-3040 IQ Geometry Slit Knife, Bevel Up, 3.0mm, Angled 4 72-3061 Clear Corneal Knife, 3.0mm, Angled 5 72-3201 Slit Knife, 3.2mm, Straight 7 72-3212 Slit Knife, Bevel Up, 3.2mm, Angled 7 72-3231 Slit Knife, Double Bevel, 3.2mm, Angled 6 72-3235 Clear Corneal Knife, Parallel Sides, 3.2mm, Angled 5 72-3240 IQ Geometry Slit Knife, Bevel Up, 3.2mm, Angled 4 72-3261 Slit Knife, Bevel Up, 3.2mm, Angled 6 72-3261G Guarded Slit Knife, Bevel Up, 3.2mm, Angled 1 72-3262 Slit Blade/Tip, Bevel Up, 3.2mm, Angled 6 72-3263 Clear Corneal Knife, 3.2mm, Angled 5 72-3270 Slit Knife, 3.2mm, 70 Degree, Angled 6 72-3503 Precision Depth Knife, 350 Micron, Straight 3 72-3531 Slit Knife, Double Bevel, 3.5mm, Angled 6 72-3561 Slit Knife, Bevel Up, 3.5mm, Angled 6 72-4501 Stab Knife, 45 Degree, Straight 2 72-4502 Stab Blade/Tip, 45 Degree, Straight 2 72-5163 Slit Knife, Bevel Up, 5.1mm, Angled 6 72-5503 Precision Depth Knife, 550 Micron, Straight 3 72-6003 Precision Depth Knife, 600 Micron, Straight 3 74-1000 Sharptome Crescent Knife, 2.0mm, Straight 10 74-1010 Sharptome Crescent Knife, Bevel Up, 2.0mm, Angled 10 74-1010G Guarded Sharptome Crescent Knife, 2.0mm, Angled 1 74-1020 Sharptome Crescent Knife, Bevel Down, 2.0mm, Angled 10 74-1031 Sharptome Crescent Knife, Double Bevel, 2.0mm, Angled 10 74-2261 Spoon Knife, 2.2mm, Double Bevel, Angled 11 74-3061 Spoon Knife, 3.0mm, Double Bevel, Angled 11 74-5000 Sharptome Crescent Blade/Tip, Bevel Up, 2.0mm, Straight 10 74-5062 Sharptome Crescent Blade/Tip, Bevel Up, 2.0mm, Angled 10 74-6910 Sharptome Mini-Crescent Knife, 1.25mm, Angled 10 75-1214 ClearTrap Knife 1.2mm x 1.4mm, Angled, Width Indicators 8 75-1517 ClearTrap Knife 1.5mm x 1.7mm, Angled, Width Indicators 8 PRODUCT INDEX 44

OPHTHALMIC KNIVES OPHTHALMIC SUTURES ITEM NO. DESCRIPTION PAGE ITEM NO. DESCRIPTION PAGE PRODUCT INDEX 75-1520 ClearTrap Knife 1.5mm x 2.0mm, Angled, Width Indicators 8 75-1720 ClearTrap Knife 1.7mm x 2.0mm, Angled, Width Indicators 8 75-2522 ClearTrap Knife 2.5mm x 2.9mm, Angled, Width Indicators 8 75-2524 ClearTrap Knife 2.5mm x 3.2mm, Angled, Width Indicators 8 75-2723 ClearTrap Knife 2.75mm x 3.0mm, Angled, Width Indicators 8 75-2724 ClearTrap Knife 2.75mm x 3.2mm, Angled, Width Indicators 8 75-2725 ClearTrap Knife 2.75mm x 3.5mm, Angled, Width Indicators 8 75-2726 ClearTrap Knife 2.75mm x 3.75mm, Angled, Width Indicators 8 75-2824 ClearTrap Knife 2.85mm x 3.2mm, Angled, Width Indicators 8 75-2825 ClearTrap Knife 2.85mm x 3.5mm, Angled, Width Indicators 8 75-2826 ClearTrap Knife 2.85mm x 3.75mm, Angled, Width Indicators 8 75-2925 ClearTrap Knife 3.0mm x 3.5mm, Angled, Width Indicators 8 75-3225 ClearTrap Knife 3.2mm x 3.5mm, Angled, Width Indicators 8 76-3461 Pilot Tip Implant Knife, 3.5mm, Angled 9 76-3761 Pilot Tip Implant Knife, 3.75mm, Angled 9 76-4061 Implant Knife, 4.0mm, Angled 9 76-5161 Pilot Tip Implant Knife, 5.2mm, Angled 9 76-5261 Implant Knife, 5.2mm, Angled 9 76-5361 Pilot Tip Implant Knife, 3.2mm, Angled 9 76-5561 Pilot Tip Implant Knife, 5.5mm, Angled 9 76-6061 Pilot Tip Implant Knife, 6.0mm, Angled 9 77-1214 IQ Geometry ClearTrap Knife 1.2mm x 1.4mm, Angled 4 77-1517 IQ Geometry ClearTrap Knife 1.5mm x 1.7mm, Angled 4 77-1725 IQ Geometry ClearTrap Knife 1.5mm x 2.2 x 2.5mm, Angled 4 77-2723 IQ Geometry ClearTrap Knife 2.75mm x 3.0mm, Angled 4 77-2724 IQ Geometry ClearTrap Knife 2.75mm x 3.2mm, Angled 4 77-2824 IQ Geometry ClearTrap Knife 2.85mm x 3.2mm, Angled 4 78-2010 ClearPort Paracentesis Knife, 1.1mm, Angled 2 78-2010G Guarded ClearPort Paracentesis Knife, 1.1mm, Angled 1 78-2019 ClearPort Paracentesis Knife, 1.4mm, Angled, Width Indicators 2 78-2310 ClearPort Paracentesis Knife, 0.8mm, Angled 2 78-2510 ClearPort Paracentesis Knife, 0.6mm, Angled 2 78-5700 Scleral Blade/Tip, Straight 12 78-6600 Lamellar Blade/Tip, Angled, Bevel Up 12 78-6810 Needle Blade, Straight, 4.0mm Cutting Edge 12 78-6900 Micro-Blade, Blade/Tip, Straight, Sharp All Around 12 92-9000 Blade and Tip Handle, 9.5cm 12 92-9003 Blade and Tip Handle, 16.5cm 12 OPHTHALMIC SUTURES ITEM NO. DESCRIPTION PAGE AA-0228N Nylon, 10-0 23 AA-2176N Nylon, 6-0 22 AA-2177N Nylon, 5-0 22 AA-2178N Nylon, 4-0 22 AA-2181N Nylon, 5-0 22 AA-2193N Nylon, 5-0 22 AA-2194N Nylon, 4-0 22 AA-2316N Nylon, 7-0 22 AA-2317N Nylon, 6-0 22 AA-2428N Nylon, 5-0 22 AA-2510N Nylon, 10-0 23 AA-2516N Nylon, 10-0 23 AA-2517N Nylon, 9-0 23 AA-2518N Nylon, 10-0 23 AA-2519N Nylon, 10-0 23 AA-2521N Nylon, 10-0 23 AA-2522N Nylon, 10-0 22 AA-2523N Nylon, 9-0 23 AA-2524N Nylon, 10-0 23 AA-2525N Nylon, 10-0 23 AA-2532N Nylon, 10-0 23 AA-2533N Nylon, 10-0 23 AA-2534N Nylon, 10-0 23 AA-2626N Nylon, 10-0 24, 42 AA-2627N Nylon, 10-0 24, 42 AA-2673N Nylon, 10-0 24, 42 AA-2674N Nylon, 10-0 24, 42 AA-2675N Nylon, 10-0 24, 42 AA-2681N Nylon, 9-0 23 AA-2683N Nylon, 10-0 23 AA-2684N Nylon, 5-0 21 AA-2687N Nylon, 10-0 22 AA-2712N Nylon, 10-0 24, 42 AA-2713N Nylon, 11-0 24, 42 AA-2714N Nylon, 10-0 24, 42 AA-2819N Nylon, 9-0 24 AA-691N Nylon Clear, 4-0 22 AD-1661 Nylon, 5-0 21 AD-1662 Nylon, 4-0 21 AD-1666 Nylon, 5-0 21 AD-1666S Nylon, 5-0 21 AD-1667 Nylon, 4-0 21 AD-1667S Nylon, 4-0 21 AD-1696 Nylon, 7-0 21 AD-1698 Nylon, 6-0 21 AD-1698S Nylon, 6-0 21 AD-697N Nylon, 6-0 21 AD-697S Nylon, 6-0 21 AD-698N Nylon, 5-0 21 AD-698S Nylon, 5-0 21 AD-699N Nylon, 4-0 21 AD-699S Nylon, 4-0 21 BA-2415N Plain Gut, 6-0 17 BA-2698N Plain Gut, 6-0 17 BA-2711N Plain Gut, 6-0 17 BA-770N Plain Gut, 6-0 17 45 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

OPHTHALMIC SUTURES OPHTHALMIC SUTURES ITEM NO. DESCRIPTION PAGE ITEM NO. DESCRIPTION PAGE BD-660N Plain Gut, 6-0 17 CD-687DA Chromic Gut, 5-0 17 DA-0187N Silk Braided, 6-0 25 DA-0188N Silk Braided, 6-0 25 DA-0191N Silk Braided, 7-0 25 DA-2526N Silk Braided, 8-0 26 DA-2527N Silk Braided, 7-0 26 DA-2550N Silk Blue Virgin, 8-0 26 DA-2552N Silk Blue Virgin, 8-0 26 DA-2622N Silk Braided, 6-0 25 DA-2624N Silk Braided, 6-0 26 DA-2680N Silk Braided, 7-0 25 DA-765N Silk Braided, 6-0 25 DC-0157N Silk Braided, 3-0 25 DC-0157D Silk Braided, 3-0 25 DC-0210N Silk Braided, 4-0 25 DC-0210D Silk Braided, 4-0 25 DC-0239N Silk Braided, 4-0 25 DC-0372N Silk Braided, 6-0 25 DC-0374N Silk Braided, 5-0 25 DC-0388D Silk Braided, 5-0 25 DC-0388N Silk Braided, 5-0 25 DC-0389N Silk Braided, 3-0 25 DC-1427D Silk Braided, 5-0 25 DC-2150N Silk Braided, 6-0 26 DC-2460N Silk Braided, 3-0 25 DC-2515N Silk Braided, 4-0 26 DC-2530N Silk Braided, 6-0 26 DC-2531N Silk Braided, 4-0 26 FA-893NC Polyviolene Polyester, 5-0 20 FC-2600N Polyviolene Polyester, 4-0 20 FC-2678N Polyviolene Polyester, 3-0 20 GA-0508N Polysyn Violet Braided, 3-0 19 GA-446N Polysyn Violet Braided, 6-0 18 GA-463N Polysyn Violet Braided, 4-0 19 GA-490N Polysyn Violet Braided, 5-0 19 GA-499N Polysyn Violet Braided, 6-0 19 GA-500N Polysyn Violet Braided, 5-0 19 GA-544N Polysyn Violet Braided, 6-0 19 GA-552N Polysyn Violet Braided, 6-0 20 GA-553N Polysyn Violet Braided, 5-0 20 GA-555N Polysyn Violet Braided, 6-0 20 GA-556N Polysyn Violet Braided, 6-0 20 GA-570N Polysyn Violet Braided, 6-0 19 GA-590N Polysyn Violet Braided, 6-0 19 GA-670N Polysyn Violet Braided, 6-0 19 GA-671N Polysyn Violet Braided, 5-0 19 GA-834N Polysyn Violet Braided, 5-0 19 GA-845N Polysyn Violet Braided, 4-0 19 GD-489S Polysyn Violet Braided, 6-0 18 GD-492N Polysyn Violet Braided, 6-0 18 GD-492S Polysyn Violet Braided, 6-0 18 GD-493N Polysyn Violet Braided, 5-0 18 GD-493S Polysyn Violet Braided, 5-0 18 GD-494N Polysyn Violet Braided, 4-0 18 GD-494S Polysyn Violet Braided, 4-0 18 GD-495N Polysyn Violet Braided, 5-0 18 GD-495S Polysyn Violet Braided, 5-0 18 GD-496N Polysyn Violet Braided, 4-0 18 GD-496S Polysyn Violet Braided, 4-0 18 GD-497N Polysyn Violet Braided, 3-0 18 GD-503N Polysyn Violet Braided, 5-0 18 GD-504N Polysyn Violet Braided, 4-0 18 GD-506N Polysyn Violet Braided, 5-0 18 GD-507N Polysyn Violet Braided, 4-0 18 GD-794N Polysyn Violet Braided, 6-0 18 JA-2123N Polypropylene Blue, 9-0 27 JA-2200N Polypropylene Blue, 5-0 28 JA-2440N Polypropylene Blue, 6-0 28 JA-2442N Polypropylene Blue, 6-0 28 JA-2443N Polypropylene Blue, 5-0 28 JA-2448N Polypropylene Blue, 5-0 27 JA-2451N Polypropylene Blue, 5-0 27 JA-2452N Polypropylene Blue, 4-0 27 JA-2468N Polypropylene Blue, 7-0 28` JA-2528N Polypropylene Blue, 10-0 28 JA-2529N Polypropylene Blue, 10-0 28 JA-2558N Polypropylene Blue, 9-0 28 JA-2559N Polypropylene Blue, 10-0 28 JA-2560N Polypropylene Blue, 10-0 28 JA-2625N Polypropylene Blue, 9-0 29 JA-2775N Polypropylene Blue, 8-0 29 JC-1712N Polypropylene Blue, 6-0 28 JC-1713N Polypropylene Blue, 5-0 28 JD-8682 Polypropylene Blue, 4-0 27 JD-8682S Polypropylene Blue, 4-0 27 JD-8686 Polypropylene Blue, 5-0 27 JD-8686S Polypropylene Blue, 5-0 27 JD-8687 Polypropylene Blue, 3-0 27 JD-8694 Polypropylene Blue, 5-0 27 JD-8695 Polypropylene Blue, 6-0 27 JD-8695S Polypropylene Blue, 6-0 27 JD-8697 Polypropylene Blue, 6-0 27 JD-8697S Polypropylene Blue, 6-0 27 JD-8698 Polypropylene Blue, 5-0 27 JD-8698S Polypropylene Blue, 5-0 27 JD-8699 Polypropylene Blue, 4-0 27 JD-8699S Polypropylene Blue, 4-0 27 PRODUCT INDEX 46

OPHTHALMIC CANNULAS OPHTHALMIC PUNCTAL PLUGS ITEM NO. DESCRIPTION PAGE ITEM NO. DESCRIPTION PAGE PRODUCT INDEX 3002 Formed Irrigating Cystotome, 25g x 5/8in. (Pearce) 31 3003 Formed Irrigating Cystotome, 27g x 5/8in. 31 3004 Straight Irrigating Cystotome, 27g x 5/8in. 32 3005 Straight Irrigating Cystotome, 25g x 5/8in. 32 3006 Formed Irrigating Cystotome, 30g x 5/8in. 31 3009 Short Irrigating Cystotome, 27g x 5/8in. Angled Tip 32 3012 Formed Irrigating Cystotome, 27g x 5/8in. Angled Tip 31 3101 Capsule Polisher, 21g x 7/8in. 32 3105 Capsule Polisher, 23g x 5/8in. 32 3107 Flexible Tip Polisher, 27g x 7/8in. 33 3108 Flexible Tip Polisher, 23g x 7/8in. 33 3202 J-Shaped Cannula, 25g x 7/8in., Open Ended Port 33 3209 Thinwall Cannula, 23g x 5/8in., 0.4mm Top Port 33 3400 Irrigating Cannula, 20g x 7/8in., 8mm Bend to Tip 35 3401 Irrigating Cannula, 21g x 7/8in., 8mm Bend to Tip 35 3402 Irrigating Cannula, 25g x 7/8in., 8mm Bend to Tip 35 3403 Irrigating Cannula, 27g x 7/8in., 8mm Bend to Tip 35 3404 Irrigating Cannula, 23g x 7/8in., 8mm Bend to Tip 35 3405 Irrigating Cannula, 30g x 7/8in., 5mm Bend to Tip 35 3406 Irrigating Cannula, 27g x 7/8in., 5mm Bend to Tip 35 3407 Irrigating Cannula, 19g x 1in., 7mm Bend to Tip 35 3412 Viscoelastic Cannula, 25g x 7/8in., 8mm Bend to Tip 35 3413 Viscoelastic Cannula, 27g x 7/8in., 8mm Bend to Tip 35 3416 Viscoelastic Cannula, 25g x 7/8in., 8mm Bend to Tip 35 3423 Nucleus Hydrodissector, Curved, 27g x 7/8in. 34 3424 Nucleus Hydrodissector, 25g x 7/8in. 34 3425 Nucleus Hydrodissector, J-Shaped, 25g x 1in. 34 3428 Micro J-Sharped Hydrodissector, 27g x 7/8in. 34 3429 Cortical Cleaving Hydrodissector, 27g x 7/8in. 34 3431 Viscoelastic Expression, 25g x 7/8in., Angled 30 Degrees 36 3511 Retrobulbar, 23g x 1-1/2in., Atkinson Point 30 3512 Retrobulbar, 25g x 1-1/2in., Atkinson Point 30 3513 Peribulbar, 23g x 1-1/4in., Atkinson Point 30 3514 Peribulbar, 25g x 7/8in., Atkinson Point 30 3516 Retrobulbar, 23g x 1-1/2in., Sharp Point 30 3517 Peribulbar, 25g x 1-1/4in., Atkinson Point 30 3520 Sub-Tenon's, 19g x 1in. 31 3730 Lacrimal Cannula, Straight 19g 36 3732 Lacrimal Cannula, Curved 21g Shaft, 1-1/2in., Long 36 3800 Stromal Puncture Needle, 25g x 1in., 18mm Bend to Tip 37 4021 Subretinal Fluid Cannula, 6mm, 20g x 1-3/8in., Long 37 4035 Subretinal Fluid Cannula, 6mm, Curved Tip, 20g x 1-3/8in. 37 4186 Subretinal Fluid Cannula, 3mm, 20g x 1-1/4in., Long 37 C-PLUG2 Collagen Absorbable, 0.2mm Diameter 39 C-PLUG3 Collagen Absorbable, 0.3mm Diameter 39 C-PLUG4 Collagen Absorbable, 0.4mm Diameter 39 C-PLUG-V Collagen Absorbable, 4 Cards of 3 Sizes 39 EPLUG2 Synthetic Absorbable, 0.2mm Diameter 38 EPLUG3 Synthetic Absorbable, 0.3mm Diameter 38 EPLUG4 Synthetic Absorbable, 0.4mm Diameter 38 PAK-101 Punctal Gauge/Dilator Set 39 PPLUG4 Silicone, 0.4mm Plug/Inserter 38 PPLUG5 Silicone, 0.5mm Plug/Inserter 38 PPLUG6 Silicone, 0.6mm Plug/Inserter 38 PPLUG7 Silicone, 0.7mm Plug/Inserter 38 PPLUG8 Silicone, 0.8mm Plug/Inserter 38 Z-QUICK Phenol Red Thread Tear Test Strips 39 OPHTHALMIC SPECIALTY PRODUCTS ITEM NO. DESCRIPTION PAGE 11840 UltraFit Vacuum Trephine 41 11850 UltraFit Donor Punch 41 11901 UltraFit X-Hair Trephine 41 11903 UltraFit Long-Handled Trephine 41 G101-100RB Eye Garter Covers, Royal Blue 43 G101-50 Eye Garter Covers, Assorted Colors 43 G102-50 Eye Garter Covers, White 43 G102-500 Eye Garter Covers, White 43 G201-50 Eye Garter, Adult without Cover 43 G201-500 Eye Garter, Adult without Cover 43 G202-100RB Eye Garter, Adult, Royal Blue 43 G202-50 Eye Garter, Adult, Assorted Color Covers 43 G202-500 Eye Garter, Adult, Assorted Color Covers 43 G203-50 Eye Garter, Adult, White 43 G203-500 Eye Garter, Adult, White 43 G251-25 Easy Shield, Adult, Colored Cover, with Adhesive 43 G252-25 Easy Shield, Adult, White Cover, with Adhesive 43 G257-25 Easy Shield, Adhesives, Adult/Youth 43 G301-50 Eye Garter, White Plastic, without Cover 43 G301-500 Eye Garter, White Plastic, without Cover 43 G402-50 Eye Garter, Pediatric, Pink/Blue Covers 43 G501-50L Eye Garter, Blue Plastic, Left without Cover 43 G501-50R Eye Garter, Blue Plastic, Right without Cover 43 G601-2 Pinhole Plastic Occulator - G701-50 Eye Garter, Clear Universal with Holes, without Cover 43 G701-500 Eye Garter, Clear Universal with Holes, without Cover 43 G702-50 Eye Garter, Clear Universal with Holes, Colored Covers 43 G702-500 Eye Garter, Clear Universal with Holes, Colored Covers 43 G703-50 Eye Garter, Clear Universal with Holes, White Covers 43 47 If you would like to place an order or require assistance cross-referencing one of our products, please call our Customer Care Center at 877 991-1110 (USA and Canada only) or 732 626-6466 or fax us at 610 404-4010.

Products Return Goods and Allowance Policy Surgical Specialties Corporation dba Angiotech (Effective May 1, 2009) Authorization for the return of merchandise must be obtained from Customer Service by calling 877 991-1110 (USA and Canada only) or 732 626-6466. Surgical Specialties Corportion dba Angiotech ( Angiotech ) will refuse any merchandise returned without an authorization number. ANY REQUESTS FOR AUTHORIZATION MUST INCLUDE: A. Reason for the return: Ordered in Error, Shipped in Error, Product Complaint, etc. B. Catalog number(s), quantity, and lot number of each box. C. Customer s purchase order number and/or Angiotech invoice number. D. Customer s purchase price. SPECIAL NOTE: If a customer cannot provide a purchase order number or an invoice number for the returned merchandise, then credit allowances will be based on previous purchase price history. MERCHANDISE THAT WILL NOT BE ACCEPTED: A. Merchandise ordered on Special Order or Custom Product basis. B. Merchandise not in standard packaging. C. Products not listed in the current Price List or obsoleted/discontinued products. D. Merchandise damaged by common carrier, (i.e., Truck, UPS, Parcel Post). Claim must be made against carrier as risk of loss and title pass to the customer upon delivery by Angiotech to the carrier. ALL CLAIMS FOR SHORT SHIPMENTS: A. Must be communicated to Angiotech Customer Service, via telephone or fax, within 30 days from receipt of goods or the claim will not be honored. PRODUCT EVALUATION SAMPLES: A. Angiotech will guarantee a 100% refund of the purchase price to the end-user customer for any product purchased on an initial evaluation order, if that product does not perform to your current standards. At least 50% of the original contents of the box must be provided to receive this refund. Contact Angiotech Customer Service at 877 991-1110 or 732 626-6466 for additional details. ALLOWANCE SCHEDULE FOR ACCEPTABLE STOCK RETURNS: A. Saleable merchandise returned within 60 days of invoice date requiring no reprocessing...full Credit B. Saleable merchandise returned after 60 days to one year of invoice date requiring no reprocessing...cost Less 40% C. Saleable merchandise returned within 60 days of invoice date requiring reprocessing, repackaging, etc...cost Less 40% D. Saleable merchandise returned after 60 days to one year of invoice date requiring reprocessing, repackaging, etc...cost Less 60% E. Merchandise returned after one year from invoice date...no Credit F. Merchandise unsuitable for resale...no Credit G. Merchandise defective at time of receipt by customer...full Credit H. Merchandise shipped in error by Angiotech...Full Credit NOTES: A. Customer must prepay all freight charges on stock returns except for: 1. Defective material. 2. Merchandise shipped in error. Upon authorization by Angiotech Customer Service, merchandise will be accepted freight collect. B. Returns from dealers/customers must be handled by contacting Angiotech Customer Service. These returns are subject to all of the above terms. This policy constitutes the entire policy for Surgical Specialties Corporation dba Angiotech and supersedes all prior return goods policies, whether written or oral, with respect thereto and shall not be modified orally. This policy only applies to products manufactured by Surgical Specialties Corporation dba Angiotech and Surgical Specialties Puerto Rico, Inc. and not any other subsidiary of Angiotech Pharmaceuticals, Inc.