Cone Crushing and Screening School #2 August 7 th 9 th, 2018 Johnson Crushers International, Eugene, Oregon Course Description This three-day course will educate attendees on how to assemble, disassemble, operate and maintain the Kodiak Plus Cone Crusher, Combo Screen and triple-shaft horizontal screen. The course will also review the new KCS control system, which replaced the MILO control system. Participants will receive hands-on training as well as classroom education. Early Bird Registration: July 20 Tuition fee: Rate: $399 per person. Earlybirds that register before July 13 th the rate charged is $299. Billing Dealers with credit accounts with the factory may use a Purchase Order number (PO) for billing. Customers attending classes will be billed through the servicing dealer or credit card for those that do not have a dealer. If credit card billing is preferred, please make a note in the registration form with contact info so the hosting factory can reach you for credit card information. Location The conference portion of this training is being held at: Holiday Inn Eugene/Springfield 919 Kruse Way Springfield, OR 97477 Hotel Front Desk: (541) 284-0707 Hotel Fax: (541) 284-4498 Map It Hotel Accommodations You must make your hotel accommodations independently of your school reservation. Be sure to announce you are with the Johnson Crushers International (JCI) PRO Training School upon registration to ensure the discounted rate. Online bookings will not offer you the discounted rate; you must call the hotel directly. We have a block of rooms with reduced rates at the above hotel.
Transportation: There is a complimentary airport shuttle offered by this hotel. Upon arriving at the Eugene Airport, please use the airport courtesy phone or call the hotel at the number listed above. Rental cars and taxis are also readily available at the airport. Any additional transportation toand-from JCI and hotel throughout the training days will be provided by JCI, as outlined in the agenda. Meals: fast will be served starting at 7:00 each morning. Lunches, assorted beverages and snacks will also be provided throughout the training. There will be a JCI-hosted dinner and social opportunity on one of the nights following training. Please refer to the agenda for further information. Students must be present through the end of the day Thursday to receive their training certificate. If you have any questions or any special requests for this event, please contact: Erik Schmidt Resource Development Manager Johnson Crushers International Toll Free: (800) 314-4656 Direct: (541) 988-9514 Mobile: (541)517-5159 eschmidt@jcieug.com
Time Schedule 2018 JCI Crushing and Screening #2 Agenda TUESDAY, August 7 th, 2018 Event fast 8:00am-8:30am 8:30am-9:00am 9:00am-10:00am 10:00am-10:15am Welcome, Introductions, and Overview Safety Level 1 Crushers: Start-up, Application, and maintenance 10:15am-11:00am 11:00am-12:00pm 12:00am- 1:30pm 1:30pm-1:45pm Level 1 Crushers: Start-up, Application, and maintenance Continued Lunch Kodiak Hydraulic HPU Troubleshooting 1:45pm-3:30pm 3:30pm-5:00pm KCS Control system Factory tour
Time Schedule 2018 JCI Crushing and Screening #2 Agenda Wednesday, August 8 th, 2018 Event 8:00am-10:15am 10:15am-10:30am 10:30am-12:00am 12:00am-1:00pm 1:00pm-2:45pm 2:45pm-3:00pm 3:00pm-3:45pm 3:45pm-5:00pm 5:00pm fast Kodiak Crushers: Lower Assembly/ Disassembly and inspection Kodiak Crushers: Lower Assembly/ Disassembly and inspection Lunch Kodiak Crushers: Kodiak Crushers Reassembly Kodiak Crushers: Kodiak Crushers Reassembly Kodiak Crusher: Liner Change Upper Assembly/Disassembly Dinner Event.
2018 JCI Crushing and Screening #2 Agenda Time Schedule Event THURSDAY, August 9 th, 2018 8:00am-9:00am 9:00am-9:15am 9:15am-10:15am fast Screens: Start-up, & Maintenance Screens: Application Operation 10:15am-10:30am 10:30am-11:30am 3-shaft Horizontal Screens Disassembly 11:30am-12:30pm Lunch 12:30pm-2:00pm 2:00pm-2:15pm 2:15pm-4:45pm 4:45pm-5:00pm 5:00pm-5:30pm 5:30pm 3-shaft Horizontal Screens: Disassembly 3-shaft Horizontal Screens: Assembly Quiz Review and Round Table & Certificates You must be present at the end of the course to receive your completion certificate!