TIFFANY TOP HUNG SLIDERS
TIFFANY TOP HUNG SLIDERS PRL s exclusive top hung Tiffany doors are excellent choice for any interior offices. The Tiffany is typically ceiling mounted, however with a modified track option we are able to fascia mount it as well. Another advantage is the slotted holes required in the glass to mount the Tiffany roller insures your panels will not slip in time with usage as many pressure fit types allow.
AVAILABLE SET UPS The Tiffany can be used in several applications, whether it be a single slider, a slider / sidelite, or bi parting pairs. The Tiffany is NOT designed to work as a by-passing or multi slide system due to the fact weight hangs the sliding panels alone and bottom of door is free with an exposed bottom guide attempting to do design as bi-passing the floor guide could be a trip hazard and the bottom of bypassing doors could sway and hit each other causing damage to the lites.
STANDARD ROLLERS 2-3/8 diameter in profile Capable of supporting doors up to: 200 lbs per Panel using 2 Rollers 350 lbs per panel using 3 Rollers Maximum panel sizes are to be considered in conjunction with maximum panel weights. Maximum width is 50 and max height is 108
STANDARD ROLLERS
STANDARD ROLLERS
PETITE ROLLER 1-3/16 diameter or 1-3/16 square in profile. The Petite are much smaller brackets and therefore have a modified weight capacity limited to 160 lbs for 2 or 200 lbs for 3. Maximum panel sizes are to be considered in conjunction with maximum panel weights. Maximum width is 42 and max height is 108 The Petite rollers are ideal for smaller applications, perhaps a display case or interior transaction window.
PETITE ROUND ROLLER 1 3/16 diameter in profile Capable of supporting doors up to: 160 lbs per Panel using 2 Rollers 200 lbs per panel using 3 Rollers
PETITE ROUND ROLLER
PETITE ROUND ROLLER
PETITE SQUARE ROLLER 1 3/16 diameter in profile Capable of supporting doors up to: 160 lbs per Panel using 2 Rollers 200 lbs per panel using 3 Rollers
PETITE SQUARE ROLLER
PETITE SQUARE ROLLER
GLASS TYPE The Tiffany system is designed to accept either 3/8 or ½ monolithic glass. PRL recommends if using 3/8 your opening size does not exceed 84 due deflection concerns.
AVAILABLE FINISHES Rollers: #8 Polished Stainless Steel, & #4 Brushed Stainless Steel The actual tracks: Anodized and painted options if the customer so chooses
X-SINGLE DOOR
BI-PARTING PAIR
XO- SINGLE DOOR & SIDELITE
OXXO- PAIR OF DOORS & SIDELITES
TRACKS PRL can supply the Tiffany tracks in nearly any finish required. They are typically clad in stainless steel to match the rollers however they can be Anodized or Powder coated as well to suit your design needs. There are 2 standard track profiles. We carry the 1-3/8 x 1-5/8 single track for applications with doors only, whether it be a single or pair. We also carry a 2-3/8 x 1-5/8 track which has a reglet for wet glazing sidelites into your package. Each application is looked at custom and we can run tracks full width of elevation for an even head sightline or we can offer the single track at door opening and sliding area only, with end caps of course, for less metal look. If in the rare occasion the client is wanting to surface mount the track directly to the face of the wall a special track will need to be used. Please note for this application however it is the glaziers responsibility to ensure adequate support in the wall to withstand the weights.
TRACKS
LOCK OPTIONS: When locks on Tiffany sliders are required we must know at time of bid to assess the overall opening widths and what type of lock would best suit your applications needs and budget. The most common type of lock would be a smaller euro type that would fit onto the bottom leading edge of the slider and strike into the floor. For single door applications a center lock housing equipped with a hook type bolt to strike into a custom jamb. The client may also decide to go with a floor striking locking ladder pull as well. In any lock application we must review each opening width since adding a lock will impede into the overall clear opening when door is slid open to its maximum.
PULLS Tiffany type systems can use pretty much any pull handle PRL offers however it is ideally recommended to use a flush type handle such as the Sliding door finger pull which will not protrude far from the face of glass to allow the sliding panel to completely slide behind the adjacent sidelite or wall. When ladder or other straight pull stiles are used we simply recommend slightly widening your door opening width once considering the pulls projection and location on the door to ensure local Clear opening codes are adhered to.
FINGER PULL
EASY- LOCK LADDER PULL