Chimney Stove Nominal heating capacity Power range Efficiency 5 kw 3-7 kw > 80% Product benefits: Compact door closure / ambient airindependent Ventilated door handle Ready for OEC (accessory) Swirl combustion chamber Rotating Description Casing: black ** Side cladding Ceramic cladding Accessories for side cladding steel: Ceramic cover (with chamber-bevel) Ceramic cover (without chamber-bevel) Natural stone cover (without chamber-bevel) Accessories: OEC Olsberg Efficiency Controller ** Stove body also available in grey Steel, black schneeweiss schneeweiss schneeweiss weichsel Sonderglasur Serpentin Article number 23/6951 23/6954 23/6954.3060 23/5754.3060 23/5757.3060 23/575x.3060 23/5753.3060 23/5751.9200 olsberg.com 1/6
There must be no objects made of combustible materials within a distance of 80 cm of the stove s radiation area, measured from the combustion chamber s inspection glass, nor may any be placed within this area subsequently. Depending on whether the stove is installed with the arrest engaged (non-rotating) or rotating, different minimum wall distances that must be complied with apply, based on the position of the combustion chamber door to the set-up wall or side wall (see Fig. 3 to 6). olsberg.com 2/6
Fulfilled requirements Test No. / type approval Z-43. 12-398 DIN EN 13240 BlmSchV (Federal Emission Control Act) level 2 Art. 15a B-VG (Austria) VKF approval (Switzerland) VKF Nr. 25692 Necessary data (billet wood / wood briquette/ Lignite briquettes ) Nominal thermal output [kw] 5,0 / 5,0 / 5,0 Waste air mass flow rate [g/s] 4,0 / 4,1 / 4,7 Waste air temperature at connection duct [ C] 340 / 324 / 351 Minimum delivery pressure at nominal thermal output [Pa] 12 / 12 / 12 Technical overview Power range [kw] 3-7 Efficiency [%] > 80% Dust, based on 13% O2 [mg/m³] 24 CO-contentm based on 13% O2 [%] 0,08 Combustion air feed Ambient air-independent Distance from wall, rear / sides [mm] * 200 / 200 Combustion chamber size H/W/D [mm] 473 / 305 / 370 Combustion chamber opening H/W [mm] 343 / 295 Flue connecting piece dimensions [mm], Ø above 1) 1270 150 mm Combustion air connecting piece dimensions [mm], Ø 125 mm behind 2) below 3) behind 2) - 170 247 Multi verification Weight / Dimension H/W/D [mm] 1238 / 466 / 466 with steel cladding [kg] 150 with ceramic cladding [kg] 180 with natural stone cladding [kg] - Configuration Door closure system self-closing Swirl combustion chamber Olsberg combustion system (includes window flushing) Integrated subsidiary air unit - Lining combustion chamber firebricks Grate cast iron Ø 164 mm Ash pan Glass front - Water System - OEC (accessory) / OEC II (accessory) / - Drehbar Heat storer (accessory) - Permissible fuels Natural shopped wood in the form of billet wood Maximum length: 33 cm Circumference: ca. 30 cm Wood briquettes to DIN EN 14961 Size class HP 2 Maximum length: 20 cm Lignite briquettes 3) Stove rear to the middle of the connecting piece * Necessary distance from wall when installed in front of (flammable) walls needing protection. olsberg.com 3/6
Miscellaneous The stove has national technical approval from the Deutsches Institut für Bautechnik (DIBt) (German Institute for Civil Engineering) for room-air independent operation. Due to its general technical approval, the stove can be used simultaneously with an approved ventilation system without additional safety device. The heating stove s fire door is self-closing; it is therefore approved for connection to chimneys with multiple connections. The stove can be operated conventionally, dependent on the ambient air as well as independent of the ambient air. Under the stove no spark protection plate is required. Subject to construction modifications and errors Rev.1_2016-06-02 olsberg.com 4/6