4567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 SAFETY Dixon's Swivel Joints are designed to give years of dependable service for their intended use The proper selection of a Swivel Joint for a particular application is of the utmost importance Users must consider the size, temperature, application, media, and the total weight supported by the Swivel Joint Dixon recommends that each Swivel Joint be inspected and properly maintained on a regular basis Dixon also recommends that Swivel Joints be tested each time they are reassembled If any problem is detected, the Swivel Joint should be removed from service immediately Dixon is available to consult, train and recommend the proper Swivel Joint for a given application Dixon strongly recommends that distributors and end users utilize Dixon's technical staff to answer any questions Dixon can be contacted at 1-800-355-1991 This Safety Alert logo, which appears throughout our catalog, is used as a reminder that the user should carefully review for safety the appropriateness of the product for the media, application and environment in which it will be used Features and Benefits: Full 360º rotational movement offers the maximum in flexibility Wide spacing between dual ball bearing raceways ensures greater load-bearing capacity The precision-machined design ensures alignment and years of trouble-free service An O-Ring dust seal is used to protect the ball races and seal chamber from all outside elements The radius elbow design ensures a smooth flow pattern DIXON color coding system for Seal identification: BU Buna-N red stripe VI Viton green stripe TF Teflon natural EP Ethylene green & white stripes Propylene 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345 All weights and dimensions are approximate and subject to change without notice 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345 Consult the factory when critical 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345 1234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345 FLANGE INFORMATION 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 34567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 Flange Bolt Tightening Sequence (Use Appropriate Gaskets and Bolts) 4 Bolt 8 Bolt 2 Nominal Pipe 1" 1 1/ 2 1/ 5" Flange O D 4 1/ 5" 7" 7 1/ 9" 10" 11" 13 1/ Dimensions of 150 LB ASA Steel Flanges Thickness* 9/1 11/1 3/ 7/ 15/1 15/1 15/1 1" 1 1/ O D of Raised Face 2 7/ 3 5/ 4 1/ 5" 6 3/1 7 5/1 8 1/ 10 5/ * 1/1 raised face is included in the thickness Dia of Bolt Circle 3 1/ 3 7/ 4 3/ 5 1/ 7 1/ 8 1/ 9 1/ 11 3/ # of Bolts 4 4 4 4 4 8 8 8 8 Dia of Bolt Holes 5/ 5/ 3/ 3/ 3/ 3/ 7/ 7/ 7/ Dia of Bolts 1/ 1/ 5/ 5/ 5/ 5/ 3/ 3/ 3/ Dixon Valve & Coupling Co

ORDERING INFORMATION 34567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 To select the proper Swivel Joint you need the following information: size style (shape) end configuration material maximum working pressure temperature range product being handled (if a chemical, advise concentration) if for constant rotation, advise RPM if for suction service, advise maximum vacuum in inches of Mercury (Hg) Options available: Any combination of end configurations Alternative seal materials: Viton, Teflon, Ethylene Propylene and FDA Buna Alternative ball bearing materials: 440 Stainless Steel and 316 Stainless Steel Alternative grease materials: FDA approved/food grade and Silicone Drain holes or counter balance lugs Swivels for Oxygen service, Steam service and submerged service can be specifically designed for unique applications by special order DIXON Swivel Joint part numbering system: swivel size 2 20 F X F CS 0 0 1 0 0 Dixon Valve & Coupling Co 3 swivel style end configuration = On Request end configuration swivel material pressure seal - (Buna-N standard) dust seal - (Buna-N standard) retainers (V-Ring ONLY) ball bearings - (C S standard) grease Dixon always recommends the use of Stainless Steel ball bearings when building a swivel for submerged service The standard Carbon Steel ball bearings may rust together, making it impossible to disassemble the swivel, which may effect its operation Every Swivel Joint is built to order, due to this, they are not generally returnable Return requests will be reviewed on a case by case basis Restocking charges will be applicable on all returns Restocking charges include 15%, PLUS any additional costs incurred 4567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 PRESSURE RECOMMENDATIONS Dixon Swivels are recommended for use at the following maximum Non-Shock Cold Working Pressures (NSCWP) provided in PSI, at ambient temperatures (70 F) 1" 1¼" 1½" (V-Ring) Carbon Steel CS 1000 1000 1000 1000 (O-Ring) (V-Ring) (O-Ring) Carbon Steel OC 1000 1000 1000 1000 Stainless Steel SS 1000 1000 1000 Stainless Steel OS 1000 1000 1000 1000 Aluminum When using flanged ends, the pressure rating will be reduced to coincide with that of the flange being used Carbon Steel and Stainless Steel150# flanges are recommended for use at 275 maximum PSI at ambient temperature (70 F) AL 150 150 150 150 150 150 150 150 Brass BR 300 300 300 Malleable Iron MI 600 600 600

PARTS IDENTIFICATION LISTS Swivel Joints 34567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 V- RING TYPE 1) Body 2) Sleeve 3) Ball Bearings 4) Seal Retainer 5) V-Ring (Pressure) Seal 6) Spring Retainer 7) Spring 8) Ball Retainer Screw 9) Grease Fitting 10) O-Ring (Dust) Seal Other available end configurations: Male NPT threads, 300# ASA flanges, Tank Car thread with gasket, TTMA Tank Truck flanges, British Pipe threads 56789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123 SPECIAL OPTIONS 456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890 45 Swivel assembly (style 30 shown) Swivel assembly with Counterweight Lug (style 50 shown) 4 Dixon Valve & Coupling Co

TYPICAL APPLICATIONS For V-Ring Swivels 4567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Loading Arms Floating Suction Floating Roof Drains Dixon Valve & Coupling Co 5

SEAL REPLACEMENT PROCEDURE for 'V' Ring Swivels 1Remove the ball retainer screws Add a sufficient amount of solvent into each raceway to flush out the lubricant Rotate the sleeve, catching the balls as they fall out When all the balls have been removed, the body and sleeve can be separated Discard old seals Thoroughly clean the body, sleeve retainer, spring retainer and springs * 4Set the dust seal into 'O' ring groove on the sleeve Place the seal retainer on the sleeve with the grooved end facing the 'V' rings Lubricate the sleeve with grease 2Lubricate the body unit with a Moly lubricant or equivalent 5Insert sleeve into body, compressing swivel joint together until ball races of body and sleeve are in alignment (Do not rotate either unit while compressing) Care should be taken to avoid pinching or scoring of 'V' rings Drop balls into raceway holes, rotating the sleeve slowly as you load To make space for all the balls, insert a screw driver into the raceway while continuing to rotate the sleeve in one direction (Be careful not to damage the threads) This will cause the balls to jam up, making room for the remaining balls Now reverse the rotation of the sleeve and insert the remaining balls 3Place the assembled spring retainer unit (spring end first) into the body Place the set of 'V' rings onto the spring retainer Be sure 'V' rings are installed with the sealing lips facing toward the retainer Lubricate the body and seals with a Moly lubricant or equivalent 6Reinstall ball retainer screws until tight If this interferes with the smooth rotation of the ball bearings, then back off 1/8-1/4 turn A thread locking sealant is recommended to prevent screws from backing off After pressure testing, the unit is ready for installation * The last coil of the springs has been upset (OD slightly larger) When upset end is inserted into the holes provided in the spring retainer, the springs remain secure 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 CAUTION: Body and sleeve are matched during manufacturing Do not mix components with other units 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456 6 Dixon Valve & Coupling Co

OPTIONAL SEALS For V-Ring Swivels 34567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 When ordering seals other than the standard Buna-N, add the following, per plane of rotation, to the standard swivel price V-Ring - Pressure Seals Viton $ 38 50 Teflon (SS) 38 50 Teflon (CS & AL) 101 25 EPR 15 35 includes changing to Teflon Retainers O-Ring - Dust Seals Viton EPR $ 72 00 $ 108 25 $ 153 60 72 00 108 25 153 60 139 55 207 70 260 00 30 70 66 15 101 65 $ 270 00 270 00 270 00 $ 9 55 $ 12 60 $ 16 40 $ 43 60 $ 55 25 7 70 9 55 11 55 31 00 -- * Carbon Steel V-Ring Swivels come standard with Aluminum retainers These must be compatible with the material flowing through the swivel Teflon retainers are available when required Consult the factory for pricing Note: When a change of seals is ordered, only the pressure seal is changed unless specifically requested by the customer REBUILD KITS For V-Ring Swivels 34567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 V-Ring Swivels : Each kit contains: 3 V-Rings in the material indicated, 1 Buna-N dust seal, 2 ball retainer screws, 1 grease plug and 10 ball bearings All other parts Buna Viton Teflon EPR 2RKVBU 3RKVBU 4RKVBU 6RKVBU 8RKVBU $ 49 35 63 30 87 50 162 45 265 35 2RKVVI 3RKVVI 4RKVVI 6RKVVI 8RKVVI $ 87 60 135 55 193 85 315 75 535 20 2RKVTF 3RKVTF 4RKVTF 6RKVTF 8RKVTF The Spring Retainer and Seal Retainer are not included in the V-Ring Swivel Rebuild Kits Consult the factory for pricing and proper material selection of retainers Note: All Rebuild Kits are per plane of rotation $ 87 60 135 55 193 85 315 75 535 20 2RKVEP 3RKVEP 4RKVEP 6RKVEP 8RKVEP $ 61 20 89 10 145 75 222 00 4567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 OPTIONAL BALL BEARINGS For V-Ring Swivels 56789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890 Add the following, per plane of rotation, to the standard swivel price Ball Bearings 440 Stainless Steel 316 Stainless Steel $ 39 40 63 00 $ 48 85 78 10 $ 66 20 105 85 $ 211 70 257 00 $ 410 00 912 90 345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 34567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 s are per Ball Bearing REPLACEMENT BALL BEARINGS For V-Ring Swivels Qty Per Plane of Rotation Carbon Steel (Standard) 440 Stainless Steel 316 Stainless Steel 50 62 84 96 84 38CSBA 38CSBA 38CSBA 12CSBA 34CSBA $ 0 15 0 15 0 15 0 50 2 55 38SSBA 38SSBA 38SSBA 12SSBA 34SSBA $ 1 00 1 00 1 00 2 75 7 50 38SSBA-316 38SSBA-316 38SSBA-316 12SSBA-316 34SSBA-316 $ 1 50 1 50 1 50 3 25 13 00 Dixon Valve & Coupling Co 7

SINGLE PLANE 'V' - Ring STYLE 20 Weld end x Weld end 20 220WXW 320WXW 420WXW 620WXW 820WXW $ 490 00 876 00 -- 593 00 1362 00 -- 772 00 1670 00 -- 1766 00 4145 00 1280 00 2694 00 7376 00 2934 00 (lbs) 9 2 9 2 12 9 13 1 24 4 25 1 54 5 56 5 21 6 78 3 92 3 35 3 Dimensions (inches) A 5 5/1 5 3/ 7" 8 3/ 8 5/ 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 Weld End Swivel Joints should be completely disassembled 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 CAUTION: prior to welding, so as not to damage the seals Care should 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 be taken to avoid distortion of seal and ball race diameters 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345 Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels 8 Dixon Valve & Coupling Co

SINGLE PLANE 'V' - Ring STYLE 20 Female NPT x Female NPT (lbs) Dimensions (inches) A 220FXF 320FXF 420FXF 620FXF 820FXF $ 470 00 950 00 -- 671 00 1461 00 -- 870 00 2071 00 -- 1895 00 6385 00 1736 00 -- -- -- 12 7 12 2 17 0 18 4 36 7 37 7 67 5 69 5 25 8 8 11/1 10" 11 3/ 12 1/ 12 7/ 20 150# ASA Flange x 150# ASA Flange (lbs) Dimensions (inches) A 220FGXFG 320FGXFG 420FGXFG 620FGXFG 820FGXFG $ 595 00 1425 00 -- 840 00 1990 00 -- 992 00 2585 00 -- 1860 00 5850 00 2300 00 3155 00 9400 00 4558 00 21 7 21 1 36 0 35 3 57 4 58 1 104 2 106 2 39 0 162 3 170 3 61 0 10 5/1 11 1/ 1 15 3/ 16 5/ Dixon Valve & Coupling Co 9

SINGLE PLANE 'V' - Ring STYLE 30 Female NPT x Female NPT 30 230FXF 330FXF 430FXF 630FXF 830FXF $ 476 00 1022 00 -- 775 00 1723 00 -- 930 00 2375 00 -- 2221 00 7056 00 2438 00 -- -- (lbs) 12 1 12 1 20 6 21 3 42 4 44 4 84 3 84 2 31 5 140 4 Dimensions (inches) A B 9" 3 11/1 10 7/ 13 3/ 16 1/ 18 3/ 5 1/ 6 3/ 7 7/ 10 1/ Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels 10 Dixon Valve & Coupling Co

SINGLE PLANE 'V' - Ring STYLE 30 150# ASA Flange x 150# ASA Flange 30 230FGXFG 330FGXFG 430FGXFG 630FGXFG 830FGXFG $ 655 00 1485 00 -- 975 00 2203 00 -- 1150 00 2952 00 -- 2140 00 6490 00 3001 00 3660 00 11543 00 5654 00 (lbs) 22 7 22 1 39 4 38 2 63 6 64 8 121 0 120 9 44 7 196 3 207 9 76 6 Dimensions (inches) A 9 13/1 11 1/ B 4 1/ 5 3/ 1 7" 17 7/ 9 1/ 20 5/ 1 Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels Dixon Valve & Coupling Co 11

SINGLE PLANE 'V' - Ring STYLE 40 Female NPT x Female NPT 40 240FXF 340FXF 440FXF 640FXF 840FXF $ 596 00 1350 00 -- 915 00 2030 00 -- 1085 00 2680 00 -- 2450 00 -- 3141 00 -- -- Dimensions (inches) (lbs) A B C 13 1 13 1 24 0 24 2 48 6 51 1 101 1 98 9 39 0 174 4 195 6 75 8 9 5/1 11 3/ 24 5/ 3 11/1 5 1/ 15" 6 3/ 20 3/ 7 7/ 10 1/ 7 3/ 10 1/ 12 3/ 15 3/ 20 1/ Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels 12 Dixon Valve & Coupling Co

SINGLE PLANE 'V' - Ring STYLE 40 150# ASA Flange x 150# ASA Flange 40 240FGXFG 340FGXFG 440FGXFG 640FGXFG 840FGXFG $776 00 1860 00 -- 1120 00 2600 00 -- 1300 00 3311 00 -- 2460 00 7155 00 3703 00 4156 00 14200 00 6750 00 Dimensions (inches) (lbs) A B C 23 7 23 1 42 8 41 1 69 8 71 5 137 8 135 6 52 2 230 3 245 5 92 2 9 5/1 11 3/ 4 1/ 5 3/ 15" 7" 20 3/ 9 1/ 24 5/ 1 9" 11 1/ 1 19" 2 Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels Dixon Valve & Coupling Co 13

DOUBLE PLANE 'V' - Ring STYLE 50 Female NPT x Female NPT 50 250FXF 350FXF 450FXF 650FXF 850FXF $ 930 00 1875 00 -- 1270 00 3000 00 -- 1725 00 3754 00 -- 3990 00 -- -- -- -- Dimensions (inches) (lbs) A B C 22 8 23 3 36 9 37 3 73 0 76 2 155 6 155 4 60 6 252 7 287 9 111 1 9 5/1 11 3/ 24 5/ 3 11/1 5 1/ 15" 6 3/ 20 3/ 7 7/ 10 1/ 12 11/1 1 19 3/ 24 1/ 28 7/ Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels 14 Dixon Valve & Coupling Co

DOUBLE PLANE 'V' - Ring STYLE 50 150# ASA Flange x 150# ASA Flange 50 250FGXFG 350FGXFG 450FGXFG 650FGXFG 850FGXFG $1050 00 2310 00 -- 1480 00 3500 00 -- 1933 00 4477 00 -- 3965 00 11000 00 5056 00 6785 00 9684 00 Dimensions (inches) (lbs) A B C 32 8 32 2 55 7 54 3 94 2 96 6 192 3 192 1 73 8 308 6 337 8 127 5 9 5/1 11 3/ 4 1/ 5 3/ 15" 7" 20 3/ 9 1/ 24 5/ 1 14 5/1 17 1/ 21" 27 3/ 32 5/ Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels Dixon Valve & Coupling Co 15

DOUBLE PLANE 'V' - Ring STYLE 60 Female NPT x Female NPT 60 260FXF 360FXF 460FXF 660FXF 860FXF $ 896 00 1750 00 -- 1150 00 2550 00 -- 1566 00 3456 00 -- 3700 00 -- -- -- -- (lbs) Dimensions (inches) A 9" 10 7/ 13 3/ 16 1/ 18 3/ Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels 16 Dixon Valve & Coupling Co

DOUBLE PLANE 'V' - Ring STYLE 60 150# ASA Flange x 150# ASA Flange 60 260FGXFG 360FGXFG 460FGXFG 660FGXFG 860FGXFG $ 975 00 2180 00 -- 1340 00 3200 00 -- 1880 00 4146 00 -- 3670 00 10400 00 4353 00 6230 00 19496 00 8669 00 (lbs) Dimensions (inches) A 9 13/1 11 1/ 1 17 7/ 20 5/ Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels Dixon Valve & Coupling Co 17

DOUBLE PLANE 'V' - Ring STYLE 70 Female NPT x Female NPT 70 270FXF 370FXF 470FXF 670FXF 870FXF $998 00 1910 00 -- 1425 00 3400 00 -- 1778 00 4051 00 -- 4300 00 -- -- -- -- (lbs) 23 7 24 35 40 3 40 2 79 2 82 9 172 4 286 7 Dimensions (inches) A 9 5/1 11 3/ B 3 11/16 5 1/ 15" 6 3/ 20 3/ 24 5/ 7 7/ 10 1/ Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels 18 Dixon Valve & Coupling Co

DOUBLE PLANE 'V' - Ring STYLE 70 150# ASA Flange x 150# ASA Flange 70 270FGXFG 370FGXFG 470FGXFG 670FGXFG 870FGXFG $1120 00 2420 00 -- 1600 00 3725 00 -- 2080 00 4900 00 -- 4270 00 11555 00 5758 00 7279 00 24683 00 (lbs) 33 8 33 2 59 1 57 2 100 4 103 3 209 1 206 8 81 5 342 6 375 4 143 0 Dimensions (inches) A 9 5/1 11 3/ B 4 1/ 5 3/ 15" 7" 20 3/ 9 1/ 24 5/ 1 Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels Dixon Valve & Coupling Co 19

TRIPLE PLANE 'V' - Ring STYLE 80 Female NPT x Female NPT 80 Dimensions (inches) (lbs) A B C 280FXF 380FXF 480FXF 680FXF 880FXF $1600 00 1860 00 -- 2008 00 4759 00 -- 2647 00 5783 00 -- 6076 00 -- -- 33 0 33 5 53 2 53 3 103 6 108 0 226 9 226 6 89 0 365 0 414 8 162 0 9 5/1 11 3/ 24 5/ 9 9/1 10 7/ 15" 13 3/ 20 3/ 16 1/ 18 3/ 3 11/1 5 1/ 6 3/ 7 7/ 10 1/ Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels 20 Dixon Valve & Coupling Co

TRIPLE PLANE 'V' - Ring STYLE 80 150# ASA Flange x 150# ASA Flange 80 Dimensions (inches) (lbs) A B C 280FGXFG 380FGXFG 480FGXFG 680FGXFG 880FGXFG $1661 00 3561 00 -- 2218 00 5259 00 -- 2855 00 6506 00 -- 6051 00 43 1 42 4 72 0 70 3 124 8 128 4 263 6 263 3 102 2 420 9 467 6 178 0 9 5/1 11 3/ 24 5/ 9 13/1 11 1/ 15" 1 20 3/ 17 7/ 20 5/ 4 1/ 5 3/ 7" 9 1/ 1 Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels Dixon Valve & Coupling Co 21

TRIPLE PLANE 'V' - Ring STYLE 10 Female NPT x Female NPT 10 210FXF 310FXF 410FXF 610FXF 810FXF $1264 00 2400 00 -- 1625 00 3970 00 -- 2365 00 4828 00 -- 5530 00 -- -- -- -- (lbs) 32 0 32 5 49 8 50 4 97 4 101 3 210 2 331 0 Dimensions (inches) A B 9 5/1 9" 11 3/ 10 7/ 15" 13 3/ 20 3/ 24 5/ 16 1/ 18 3/ Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels 22 Dixon Valve & Coupling Co

TRIPLE PLANE 'V' - Ring STYLE 10 150# ASA Flange x 150# ASA Flange 10 210FGXFG 310FGXFG 410FGXFG 610FGXFG 810FGXFG $1324 00 2760 00 -- 1840 00 4400 00 -- 2566 00 5643 00 -- 5470 00 14845 00 (lbs) 42 1 41 4 68 6 67 4 118 6 121 7 222 1 233 9 97 2 386 9 430 1 162 8 Dimensions (inches) A 9 5/1 11 3/ B 9 13/1 11 1/ 15" 1 20 3/ 24 5/ 17 7/ 20 5/ Aluminum for Retainers in Carbon Steel Swivels Teflon for Retainers in Stainless Steel Swivels Dixon Valve & Coupling Co 23

PARTS IDENTIFICATION LISTS Swivel Joints 4567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123 4 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123 345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 O- RING TYPE 1) O-Ring (Dust) Seal 2) Ball Retainer Screw 3) O-Ring (Pressure) Seal 4) Grease Fitting 5) Ball Bearings Other available end configurations: Male NPT threads, Tank Car thread with gasket, TTMA Tank Truck flanges SPRING-LOADED TEFLON PRESSURE SEAL For O-Ring Swivels 456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123 456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890 Cross Sectional View of Seal (for use in sizes 1" - ) 5678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 SPECIAL OPTIONS For O-Ring Swivels 456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890 24 Swivel with Handle (style 40 shown) Tank Car Swivel (style 30 shown) Swivel assembly with Counterweight Lug (style 40 shown) Dixon Valve & Coupling Co

TYPICAL APPLICATIONS For O-Ring Swivels 34567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 2345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Loading Arms Hose Loaders * style 60 may also be found in this application Dixon Valve & Coupling Co 25

SEAL REPLACEMENT PROCEDURE for 'O' Ring Swivels NOTE: Instructions not for assembly with Spring-loaded Teflon Pressure Seal Consult the Factory 1Remove the ball retainer screws Add a sufficient amount of solvent into each raceway to flush out the lubricant Rotate the sleeve, catching the balls as they fall out When all the balls have been removed, the body and sleeve can be separated Discard old seals Thoroughly clean the body and sleeve 4Insert the sleeve into the body, slowly rotate the sleeve while inserting into the body 2Install the new 'O' rings on the sleeve, dust seal to the rear, product (pressure) seal up front 5When the sleeve is fully inserted, feed the ball bearings into the raceways while rotating the sleeve To make space for all the balls, insert a screw driver into the raceway, while continuing to rotate the sleeve in one direction (Be careful not to damage the threads) This will cause the balls to jam up, making room for the remaining balls Now reverse rotation of sleeve and insert the remaining balls 3Lubricate the body and the sleeve with grease 6Reinstall ball retainer screws until tight If this interferes with the smooth rotation of the ball bearings, then back off 1/8-1/4 turn A thread locking sealant is recommended to prevent screws from backing off After pressure testing, the unit is ready for installation 26 CAUTION: Body and sleeve are matched during manufacturing Do not mix components with other units Dixon Valve & Coupling Co

When ordering seals other than the standard Buna-N, add the following, per plane of rotation, to the standard swivel price O-Ring - Pressure Seals Viton Spring-loaded Teflon EPR O-Ring - Dust Seal Viton EPR 1" 1 1/ & 1 1/ $ 5 35 67 60 3 90 $ 5 35 3 90 $ 7 15 80 35 5 80 OPTIONAL SEALS For O-Ring Swivels 34567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 $ 9 55 90 85 7 70 $ 12 60 118 25 9 55 $ 16 40 -- 11 55 1" 1 1/ & 1 1/ $ 7 15 $ 9 55 $ 12 60 5 80 7 70 9 55 $ 16 40 11 55 Note: When a change of seals is ordered, only the pressure seal is changed unless specifically requested by the customer REBUILD KITS For O-Ring Swivels 34567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901 345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 O-Ring Swivels: Each kit contains: 1 O-Ring (Pressure Seal) in the material indicated, 1 Buna-N Dust Seal, 2 ball retainer screws, 1 grease plug and 10 ball bearings All other parts 1" 1 1/ & 1 1/ Buna Viton Spring-loaded Teflon EPR 1RKOBU 150RKOBU 2RKOBU 3RKOBU 4RKOBU $ 11 90 12 40 15 20 17 70 22 90 Note: All Rebuild Kits are per plane of rotation 1RKOVI 150RKOVI 2RKOVI 3RKOVI 4RKOVI $ 18 80 19 35 26 80 30 10 42 70 1RKOTF 150RKOTF 2RKOTF 3RKOTF $ 79 50 92 60 106 00 136 00 1RKOEP 150RKOEP 2RKOEP 3RKOEP 4RKOEP - $ 13 20 17 65 20 90 31 00 OPTIONAL BALL BEARINGS For O-Ring Swivels 345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 4 23456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234567890123 345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Add the following, per plane of rotation, to the standard swivel price Ball Bearings 440 Stainless Steel 316 Stainless Steel 1" 1 1/ & 1 1/ $ 8 40 35 75 $11 80 50 00 $ 36 25 58 00 $ 47 25 75 60 $ 63 00 100 08 REPLACEMENT BALL BEARINGS For O-Ring Swivels 345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 s are per Ball Bearing 1" 1 1/ & 1 1/ Qty Per Plane of Rotation 40 56 46 60 80 Carbon Steel (Standard) 14CSBA 14CSBA 38CSBA 38CSBA 38CSBA $ 0 15 0 15 0 15 0 15 0 15 440 Stainless Steel 316 Stainless Steel 14SSBA 14SSBA 38SSBA 38SSBA 38SSBA $ 0 40 0 40 1 00 1 00 1 00 14SSBA-316 14SSBA-316 38SSBA-316 38SSBA-316 38SSBA-316 $ 1 25 1 25 1 50 1 50 1 50 Dixon Valve & Coupling Co 27

SINGLE PLANE 'O' - Ring STYLE 20 Female NPT x Female NPT 20 (lbs) Dimensions (inches) A 1" 1¼" 1½" 120FXF 12520FXF 15020FXF 220FXF 320FXF 420FXF $ 226 00 550 00 160 00 -- -- -- -- 175 00 -- -- 330 00 842 00 173 00 245 00 185 00 373 00 884 00 242 00 328 00 259 00 528 00 1450 00 278 00 477 00 390 00 -- -- 420 00 -- -- 2 8 2 5 1 1 1 4 1 4 4 3 3 8 6 3 6 8 3 5 8 5 7 5 8 6 9 0 4 0 11 1 9 7 7 3 3 15/1 3 15/1 -- 3 31/3 5 9/1 5 9/1 5 7/ 5 29/3 -- 7 5/ 28 Dixon Valve & Coupling Co

SINGLE PLANE 'O' - Ring STYLE 20 150# ASA Flange x 150# ASA Flange 20 (lbs) Dimensions (inches) A 1" 1½" 120FGXFG 1520FGFG 220FGXFG 320FGXFG 420FGXFG $ 292 00 689 00 -- 553 00 550 00 1295 00 758 00 766 00 1882 00 880 00 -- -- 1117 00 7 8 16 6 10 0 13 0 7 9/3 -- 8 1/1 8 11/1 8 17/3 10 3/ 9 5/ 11 5/3 -- 13 5/1 Dixon Valve & Coupling Co 29

SINGLE PLANE 'O' - Ring STYLE 30 Female NPT x Female NPT 30 (lbs) Dimensions (inches) A B 1" 1½" 130FXF 15030FXF 230FXF 330FXF 430FXF $ 286 00 598 00 -- -- -- 365 00 860 00 185 00 260 00 195 00 420 00 1022 00 245 00 350 00 284 00 670 00 1673 00 335 00 571 00 434 00 -- -- 435 00 -- -- 3 6 3 0 5 0 5 6 1 7 5 2 4 6 7 6 6 3 4 1 9 9 8 8 13 4 13 2 5 2 15 4 13 0 9 2 4 13/3 5 29/3 2 3/1 2 11/1 -- -- 5 7/1 4 11/1 6 21/3 6 3/1 8 9/6 7 1/1 3 15/3 3 1/ 2 7/ 4 13/1 3 7/ -- -- 9 1/ 4 3/ 30 Dixon Valve & Coupling Co

SINGLE PLANE 'O' - Ring STYLE 30 150# ASA Flange x 150# ASA Flange 30 1" 1½" 130FGXFG 1530FGFG 230FGXFG 330FGXFG 430FGXFG $ -- 499 00 985 00 580 00 1385 00 772 00 875 00 2245 00 925 00 -- -- 1130 00 (lbs) Tank Truck Flange x Tank Truck Flange 12 8 Dimensions (inches) A B 6 3/3 3 3/1 6 19/3 3 11/1 -- -- 7 7/ 7 1/3 8 1/3 8 5/ 9 7/ 9 11/1 11 31/3 4 11/1 5 11/3 4 1/ 5 9/3 5 3/ 6 15/3 -- -- 7 19/3 (lbs) Dimensions (inches) $ 230TFXTF 330TFXTF 475 00 8 3/ 5 9/1 OS - Carbon STL -- 430TFXTF -- -- -- 630 00 10 15/1 6 9/1 Dixon Valve & Coupling Co 31 A B

SINGLE PLANE 'O' - Ring STYLE 40 Female NPT x Female NPT 40 Dimensions (inches) (lbs) A B C 1" 1½" 140FXF 15040FXF 240FXF 340FXF 440FXF $ 336 00 664 00 -- -- -- 413 00 1041 00 210 00 285 00 221 00 545 00 1270 00 270 00 388 00 358 00 810 00 2100 00 377 00 655 00 560 00 -- -- 478 00 -- -- 4 4 7 0 2 3 6 8 6 2 8 5 4 5 11 2 9 1 17 7 5 9 18 0 15 0 10 2 4 59/6 5 59/6 2 3/1 2 11/1 4 3/ 5 3/ -- -- -- 7 11/1 6 1/ 7 17/3 6 11/1 10 1/ 8 1/ 3 15/3 3 1/ 2 7/ 4 13/1 3 7/ 6 15/1 6 1/ 5 3/ 9 5/ 7 3/ -- -- -- 10 5/ 4 3/ 9 1/ 32 Dixon Valve & Coupling Co

SINGLE PLANE 'O' - Ring STYLE 40 150# ASA Flange x 150# ASA Flange 40 1" 1½" 140FGXFG 1540FGFG 240FGXFG 340FGXFG 440FGXFG $ -- 546 00 1175 00 690 00 1750 00 785 00 1080 00 2575 00 969 00 -- -- 1170 00 (lbs) A Dimensions (inches) B C 4 59/6 3 3/1 6 3/ 5 59/6 3 11/1 7 3/ -- -- -- 7 11/1 6 1/ 7 17/3 6 11/1 10 1/ 8 1/ Tank Truck Flange x Tank Truck Flange 4 11/1 5 11/3 4 1/ 5 9/3 5 3/ 6 5/ 9 3/ 5 11/1 9" 10 9/1 11 1/ 13 1/ -- -- -- 10 5/ 7 9/1 15 1/ Dimensions (inches) (lbs) A B C $ 240TFXTF 340TFXTF 605 00 7 3 8 1/ 5 9/1 11 1/ OS - Carbon STL -- 440TFXTF -- -- -- -- 775 00 17 0 10 5/ 6 9/1 13 1/ Dixon Valve & Coupling Co 33

DOUBLE PLANE 'O' - Ring STYLE 50 Female NPT x Female NPT 50 Dimensions (inches) (lbs) A B C 1" 1½" 150FXF 15050FXF 250FXF 350FXF 450FXF $ 550 00 993 00 -- -- -- 660 00 1650 00 450 00 -- -- 765 00 1786 00 460 00 680 00 540 00 855 00 2990 00 554 00 -- 730 00 -- -- 750 00 -- -- 7 3 9 0 7 8 13 2 21 8 9 4 21 5 15 0 4 59/6 5 59/6 2 3/1 2 11/1 6 3/3 7 19/3 -- -- -- 7 11/1 6 1/ 7 17/3 6 11/1 10 1/ 8 1/ 3 15/3 3 1/ 2 7/ 4 13/1 3 7/ 8 29/3 7 11/1 9 29/3 9 1/1 12 61/6 10 29/3 -- -- -- 10 5/ 4 3/ 13 7/ 34 Dixon Valve & Coupling Co

DOUBLE PLANE 'O' - Ring STYLE 50 150# ASA Flange x 150# ASA Flange 50 1" 1½" 150FGXFG 1550FGFG 250FGXFG 350FGXFG 450FGXFG $ -- 546 00 1175 00 690 00 1750 00 785 00 1080 00 2575 00 969 00 -- -- 1170 00 (lbs) A Dimensions (inches) B C 4 59/6 3 3/1 9 19/6 5 59/6 3 11/1 10 19/6 -- -- -- 7 11/1 6 1/ 7 17/3 6 11/1 10 1/ 8 1/ 4 11/1 5 11/3 4 1/ 5 9/3 5 3/ 6 15/3 12 9/1 12 3/8' 12 17/3 13 29/3 15 5/ 16 3/3 -- -- -- 10 5/ 7 19/3 19 9/16 Dixon Valve & Coupling Co 35

DOUBLE PLANE 'O' - Ring STYLE 60 Female NPT x Female NPT 60 (lbs) Dimensions (inches) A 1" 1½" 160FXF 15060FXF 260FXF 360FXF 460FXF $ 530 00 943 00 -- -- -- 640 00 1470 00 397 00 -- -- 622 00 434 00 675 00 458 00 1009 00 1714 00 535 00 -- 615 00 -- -- 698 00 -- -- 7 0 7 7 6 9 14 3 19 4 8 6 18 6 13 4 4 13/3 4 29/3 -- 5 7/1 4 11/1 6 21/3 6 7/3 8 9/6 7 1/3 -- 9 1/ 36 Dixon Valve & Coupling Co

DOUBLE PLANE 'O' - Ring STYLE 60 150# ASA Flange x 150# ASA Flange 60 1" 1½" 160FGXFG 1560FGFG 260FGXFG 360FGXFG 460FGXFG $ -- 778 00 2145 00 3161 00 1121 00 -- -- 1398 00 (lbs) Dimensions (inches) A 6 7/6 6 39/6 -- 7 7/ 7 1/3 8 1/3 8 5/ 9 7/ 9 5/ -- 11 31/3 Dixon Valve & Coupling Co 37

TRIPLE PLANE 'O' - Ring STYLE 70 Female NPT x Female NPT 70 1" 1½" 170FXF 15070FXF 270FXF 370FXF 470FXF $ 640 00 1130 00 -- -- -- 658 00 1765 00 443 00 -- -- 800 00 1905 00 486 00 650 00 577 00 1299 00 3278 00 600 00 -- 844 00 -- -- 805 00 -- -- (lbs) 7 6 3 8 16 4 7 8 10 1 16 7 Dimensions (inches) A 4 59/6 5 59/6 B 2 3/1 2 11/1 -- -- 7 11/1 6 1/ 7 17/3 6 11/1 10 1/ 8 1/ 3 15/3 3 1/ 2 7/ 4 13/1 3 7/ -- -- 10 5/ 4 3/ 38 Dixon Valve & Coupling Co

TRIPLE PLANE 'O' - Ring STYLE 70 150# ASA Flange x 150# ASA Flange 70 1" 1½" 170FGXFG 1570FGFG 270FGXFG 370FGXFG 470FGXFG $ -- 499 00 985 00 580 00 1385 00 772 00 875 00 2245 00 925 00 -- -- 1130 00 (lbs) Dimensions (inches) A B 4 59/6 5 59/6 3 3/1 -- -- 7 11/1 6 1/ 7 17/3 6 11/1 10 1/ 8 1/ 4 11/1 5 11/3 4 1/ 5 9/3 5 3/ 6 15/3 -- -- 10 5/ 7 19/3 Dixon Valve & Coupling Co 39

style 'O' Ring - type swivels The O-Ring pressure seal ensures a leak-proof seal at either high or low pressure and smoother rotation at lower torques than multiple seal designs Spring-loaded Teflon pressure seals are available up through Carbon Steel and Stainless Steel O-Ring type swivels provide greater strength and corrosion resistance when needed for lower torque applications style 'V' Ring - type swivels The spring-loaded triple V-Ring sealing system ensures a leak proof seal at either high or low pressure and an extended seal life compared to the conventional single O-Ring design The - Carbon Steel swivels are manufactured from a special grade of Carbon Steel with flame hardened dual raceways for greater load bearing capacity and longer life The Stainless Steel swivels are manufactured in 316 grade Stainless Steel for superior corrosion resistance Technical information USE WITH HOSE The use of Swivel Joints to compensate for twist in hose (i e Style 20 or Style 60) should be carefully reviewed, since the hose must be sufficiently stiff to generate the torque needed to actuate the swivel before it kinks In many installations, the twist is caused by lateral movement that can be eliminated by the use of a swivel joint that addresses the lateral movement (i e Style 40 or Style 30) Where this is not possible, the use of Hose Swivels may be a solution Hose Swivels are generally Non-Ball Bearing Designs that require less torque to initiate rotation; however, Hose Swivels are not designed for load bearing service Some hoses are unable to generate even the low torque required for a Hose Swivel; many metal hoses fall into this group Other hoses are stiff enough to turn almost any swivel; many armored hoses fall into this group Valve & Coupling Company 800 High Street Chestertown, Maryland 21620 410-778-2002 Customer Service: 800-355-1991 Fax: 800-283-4966 2001 DVCC SPL1101-1P20M