NK Multi-stage submersible pumps

Similar documents
AISI 316L PERFORMANCE RANGE INSTALLATION AND USE

p u m p s Technology. Innovation. Commitment. S T A I N L E S S S T E E L S U B M E R S I B L E P U M P S E n h a n c e y o u r l i f e

FPS-VR Series Vertical Multistage Pumps

Data Sheet for Precision Potentiometer

TECHNICAL BROCHURE BPRIMELINE R1. Marlow Series Prime Line SELF-PRIMING CENTRIFUGAL PUMPS TECHNICAL DATA

Data Sheet for Precision Potentiometer

CAST IRON IMPELLER. VOLTAGE 50 Hz

Smallest Connector with Removable Contacts

Single, oversized roller compresses a low friction hose through a full 360-degree rotation

Pressure relief valve VRH 5 / VRH 30 / VRH 60 / VRH 120

Pressure relief valve VRH 5 / VRH 30 / VRH 60 / VRH 120

Available materials: Stainless steel AISI 304 (Application in wet areas). Stainless steel AISI 316 (Application in aggressive areas).

ENGINE DRIVEN PUMPS PRODUCTS

Automatic hose reel type ST Our topseller the hose reel type ST is a very robust and reliable version with automatic spring rewind.

Emergency Stop Devices

FIBER OPTIC CLOSURES

SIDERMAT combination Visible breaking and tripping fuse switches from 630 to 1800 A

AFA TS GmbH - Werner von Siemens Str.3 - D Grafenberg Copyright 2009 Tel.: +49(0) Fax: +49(0)

DJET. Pushbuttons. toggle switch 6,35 mm dia. recommended accessories: - mounting dimension. technical drawing. circuit drawing

FLFE..L FLF..L. - Zone 1, 2, 21, 22 - With LED tubes - Easy re-lamping - Designed to last over time. Ex e terminal board housing

Universal control- and safety isolatingresp. USTE. General Data. Advantages. Applications. Standards 2 " Certifications W

EC BRUSHLESS MOTOR APPLICATIONS

630 to 1800 A. Functions. Conformity to standards. General characteristics. Fuse combination switches SIDERMAT combination.

Spare parts list ( ) Spare parts list BR 40/10 C

International standard flanges acc.to SAE, ISO, DIN, GOST

OAsys OP0XX, Issue 01, February Outside Plant. Metallic joint closure NXOK 10 units. Features and Benefits

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:

Special Three-Phase Motors with HSK-C Tool Holder for Manual Quick Tool Change

E2 Motors and Motor Starting. #1 Fan Motors

Conservatory awning W8 Description

Accessories high-pressure cleaners:

Parts. Section 7. Using the Illustrated Parts List. Parts 7-1. The parts lists provided in this section are organized into the following columns:

Mouthwatering. display. Features Cold Deli 3 Square. Cold Deli 3

Supplementary protector S 200 MR for ring-tongue applications acc. to UL 1077

PTFE profile ring. PTFE glass MoS 2 compound. Elastomer profile ring

Entry class K 2.98 M plus

NEW Toyo DEH series.

Work area: Max. pressure: 5,800Pa Max. air volume: 32,500m³/h. Manufacturer. Model number/type. Production year. page

a Nexans company Catalogue 2009

Entry class K Order number:

OASIS DP SANIC RO. Reverse Osmosis Units with Made in Italy components. Keep your filters protected with silver based Antimicrobial Technology

RV 10 Rotary Evaporators

Non-pressurized vessels designed for the storage and transportation of liquid nitrogen

Air Handlers BCS3. Warranty Parts - 5 Year Limited. 1.5 to 5 Tons. Suitable for use with R-22 and R-410A refrigerants

TENDABOX BX3000. Cassette awning with folding arms BX3000. Description. Options:

NR, NR4 60 Hz. NR n=3450rpm NR 50/250. NR4 n=1750rpm. In-line Pumps

MR98 Series Backpressure Regulators, Relief and Differential Relief valves

COMPACT hydraulic steelworker

Table and Furniture Base Fittings Furniture Feets

NR, NR4. NR n 2900 rpm. NR4 n 1450 rpm. In-line Pumps. Construction. Applications. Operating conditions

XPO. Ultra low NOx indirect burner

CASM electric cylinders The modular electric cylinder system

Introduction 2. Other Applicable Documents 2. Scope of Delivery 3. Attaching the Snap-on Ferrite Suppressor 4

Accessories. Double-Sided secutex 50. Clip-On secutex 52. LSP-SP1 Protective Sleeving 54. slip Sleeving 56. Rigid Edge Protectors 58

DUPLEX STRAINERS 800-KECKLEY ( ) BULLETIN NO / FAX: 847/ WEB SITE:

TROLLEY-MOUNTED HOSE REELS

Eclipse Hermetic Gas Boosters Series HB

Installation Instructions

TH175. Pneumatic Wedge Grips 10, 20, 50, 100 and 300 kn TH Jaws for TH Examples for customized solutions**:

DUPLEX STRAINERS BULLETIN NO KECKLEY COMPANY 3400 Cleveland Street P.O. Box 67 Skokie, Illinois 60076

Liberty Process Equipment, Inc.

RTA flexible conduits

ACCESSORIES 5:05 5:05 PRODUCT CATALOGUE 189

ANACONDA SEALTITE CONDUIT TYPE NMFG BLUE

Kajak Sediment Sampler Model Manual. KC Denmark. Research Equipment Limnology Oceanography Hydrobiology

Tube and Valve Brushes

1. INTRODUCTION GENERAL INFORMATION WORKING PRINCIPLE CUTTING SECTION SPECIFICATIONS INSTRUCTIONS FOR USE 5

Installation Instructions

TRUMPF TRUMATIC L 3050

BROEN UNIFLEX FITTINGS FOR WATER BROEN UNIFLEX TM FITTINGS FOR WATER

NH MULTIBLOC fuse-switchdisconnector. terminal version reference no.

The 15QQ series is a unique and versatile peristaltic pump range designed for accurate dispensing of liquids.

SKID STEER ATTACHMENT

General Purpose High Power PCB Relays

Installation Instructions

Installation Instructions

Molded High-Voltage Bushing Wells

POSEIDON 4. Part List US-English

Power Relay RCE. Ordering Information. A High-capacity, High-dielectric-strength Relay Compatible with Momentary Voltage Drops

ACCESSORIES AND SPARE PARTS 07 47

DEMV-MF2 DEP-MFP. Horizontal Lathes. Heavy Duty Machines

Mounting Type Contact form Quick-connect Screw terminals PCB terminals. E-bracket SPST-NO G7L-1A-T G7L-1A-B

XENON HELIDECK FLOODLIGHT INDUSTRY USER MANUAL

TERMINAL BLOCK MARKERS MG CPM

PN 3000 Series Fail Closed Pneumatic Actuators

10 A at 100 to 240 VAC. G3NE-220T-US (20 A at 75 to 264 VAC) 5 A at 100 to 240 VAC

LSC19 Lighting Cable Assemblies and Connectors

PCB Relay G8P. Ordering Information. Small, Low-Cost 30-A Power Relay for PCB Applications. Accessories (Order Separately)

VKAP 3.0 NEW. Circular duct fans. Ventilateurs pour gaines circulaires. Rohrventilatoren. Runde kanalventilatorer CIRCULAR DUCT FANS

UNODOS + / FLOCDOS +

SPECIFICATIONS. Awnings. Sec. : Awnings Date : Dec 2017 ISSUE: AW

Installation instruction

Type Contact form Plug-in/solder Plug-in/solder PCB terminals Upper-mounting terminals terminals with plug-in/solder

Specifications of KINEDIZER burners

Grounding Clamp. Pins and Ball-Socket Clamps for Temporary Grounding

ULTRA-LIGHTWEIGHT RUGGED GALAXY SERIES

Meat Slicer INSTRUCTION MANUAL CAUTION! ONE YEAR LIMITED WARRANTY

Valves valves

HD 5/11 P EASY! Save energy and time: EASY!Force high-pressure guns and EASY!Lock quick-release locks. Quality. Accessory storage.

Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Transcription:

NK Multi-stage submersible pumps PERFORMANCE RANGE Flow rate up to 120 l/min (7.2 m³/h) Head up to 10 m APPLICATION LIMITS Maximum liquid temperature +40 C Maximum sand content 0 g/m³ 20 m maximum immersion depth Continuous service S1 CONSTRUCTION AND SAFETY STANDARDS Complete with 20 m long power cable EN 6033-1 IEC 6033-1 CEI 61-10 EN 60034-1 IEC 60034-1 CEI 2-3 INSTALLATION AND USE As a result of their high efficiency and reliability they are suitable for use with clean water in domestic, civil and agricultural applications such as the distribution of water in combination with pressure sets, for the irrigation of gardens and allotments and for pressure boosting, etc. OPTIONALS AVAILABLE ON REQUEST Pumps fitted with power cables of other lengths Other voltages or 60 Hz frequency GUARANTEE 1 year subject to terms and conditions CERTIFICATIONS 196

CHARACTERISTIC CURVES AND PERFORMANCE DATA 0 Hz n= 2900 1/min 0 10 1 20 2 110 100 0 10 1 20 2 30 NK4/ US g.p.m. Imp g.p.m. feet 30 90 NK2/ 300 Head H (metres) 0 70 60 0 40 30 NK2/4 NK2/3 NK2/2 NK2/1 NK4/4 NK4/3 NK4/2 NK4/1 20 200 10 100 20 0 10 0 0 10 20 30 40 0 60 70 0 90 100 110 120 0 1 2 3 4 6 7 Flow rate Q l/min m³/h 0 VERSION WITHOUT FLOAT SWITCH POWER m³/h 0 0.6 1.2 1. 2.4 3.0 3.6 4.2 4..4 6.0 6.6 7.2 Q Single-phase Three-phase kw HP l/min 0 10 20 30 40 0 60 70 0 90 100 110 120 NKm 2/1 0.4 0.6 36 3 33 31 2. 26 23 19 1 NKm 2/2 0. 0.7 4 46 44 41. 39 3 30 2 19 NKm 2/3 NK 2/3 0.7 1 60 1 47 42 36 30 23 NKm 2/4 NK 2/4 1.1 1. 4 0 7 70 6 9 1 42. 34 NKm 2/ NK 2/ 1. 2 90 7 3 7 73 66 4 3 H metres NKm 4/1 0. 0.7 40 37 36 34. 32. 30 2 2 21. 1. 14. 10 NKm 4/2 NK 4/2 0.7 1 0 4 46 44 41 3 3 32 2 24 19 14 NKm 4/3 NK 4/3 1.1 1. 67 6 62. 60 6. 2 4 44 3 32 2 1 NKm 4/4 NK 4/4 1. 2 7 72 69 66 64 60 7 3 4 43 3 32 NKm 4/ NK 4/ 2.2 3 10 101 9 94 90 6 0 7 67 60 2 44 GE VERSION WITH FLOAT SWITCH POWER m³/h 0 0.6 1.2 1. 2.4 3.0 3.6 4.2 4..4 6.0 6.6 7.2 Q Single-phase kw HP l/min 0 10 20 30 40 0 60 70 0 90 100 110 120 NKm 2/1 - GE 0.4 0.6 36 3 33 31 2. 26 23 19 1 NKm 2/2 - GE 0. 0.7 4 46 44 41. 39 3 30 2 19 NKm 2/3 - GE 0.7 1 60 1 47 42 36 30 23 NKm 2/4 - GE 1.1 1. 4 0 7 70 6 9 1 42. 34 NKm 2/ - GE 1. 2 90 7 3 7 73 66 4 3 H metres NKm 4/1 - GE 0. 0.7 40 37 36 34. 32. 30 2 2 21. 1. 14. 10 NKm 4/2 - GE 0.7 1 0 4 46 44 41 3 3 32 2 24 19 14 NKm 4/3 - GE 1.1 1. 67 6 62. 60 6. 2 4 44 3 32 2 1 NKm 4/4 - GE 1. 2 7 72 69 66 64 60 7 3 4 43 3 32 NKm 4/ - GE 2.2 3 10 101 9 94 90 6 0 7 67 60 2 44 Q = Flow rate H = Total manometric head Tolerance of characteristic curves in compliance with EN ISO 9906 App. A. 197

NK (0.4 1.1 kw) POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 EXTERNAL SLEEVE Stainless steel AISI 304, complete with threaded delivery port in compliance with ISO 22/1 2 SUCTION FILTER Stainless steel AISI 304 3 MOTOR SLEEVE Stainless steel AISI 304 4 IMPELLERS AND DIFFUSERS Noryl GFN2V DIAPHRAGMS Stainless steel AISI 304, complete with anti-wear ring 6 MOTOR SHAFT Stainless steel EN 100-3 - 1.4104 7 TWO MECHANICAL SEALS SEPARATED BY AN OIL CHAMBER Seal Shaft Position Materials Model Diameter Stationary ring Rotational ring Elastomer MG1-16 Ø 16 mm Motor side Silicon carbide Graphite NBR MG1-1 SIC Ø 1 mm Pump side Silicon carbide Silicon carbide NBR BEARINGS 6303 2RS - C3 / 6203 ZZ - C3 9 CAPACITOR Pump Capacitance Single-phase (230 V or 240 V) (110 V) NKm 2/1 16 μf 00 VL 30 μf 20 VL NKm 2/2 NKm 4/1 16 μf 00 VL 30 μf 20 VL NKm 2/3 NKm 4/2 20 μf 00 VL NKm 2/4 NKm 4/3 2 μf 00 VL 10 ELECTRIC MOTOR NKm: single-phase 230 V - 0 Hz with thermal overload protector built-in to the winding. NK: three-phase 400 V - 0 Hz. Insulation: F class. Protection: IP 6. 11 POWER CABLE 20 metre long DRINCABLE for permanent immersion in drinking water 12 FLOAT SWITCH 11 3 6 7 1 9 10 12 4 2 19

DIMENSIONS AND WEIGHT DN PORT N DIMENSIONS mm kg Single-phase Three-phase DN STAGES Ø h 1~ 3~ NKm 2/1 3 49 13.9 NKm 2/2 4 19 14. NKm 2/3 73 16.3 NK 2/3 43 1.0 NKm 2/4 NK 2/4 1¼ 7 13 621 1.1 1.0 NKm 4/1 4 19 14.3 NKm 4/2 73 16.2 NK 4/2 43 1.1 NKm 4/3 NK 4/3 7 621 1.1 1.0 h Ø ABSORPTION VOLTAGE (single-phase) Single-phase 230 V 240 V 110 V NKm 2/1 4. A 4. A 9.0 A NKm 2/2.0 A.0 A 10.0 A NKm 2/3 6.0 A 6.0 A NKm 2/4 7. A 7. A NKm 4/1.0 A.0 A 10.0 A NKm 4/2 6.0 A 6.0 A NKm 4/3 7. A 7. A VOLTAGE (three-phase) Three-phase 230 V 400 V 240 V 41 V NK 2/3 4. A 2.6 A 4. A 2.6 A NK 2/4.2 A 3.0 A.2 A 3.0 A NK 4/2 4. A 2.6 A 4. A 2.6 A NK 4/3.2 A 3.0 A.2 A 3.0 A PALLETIZATION GROUPAGE CONTAINER n H kg n H kg Single-phase Three-phase pumps (mm) 1~ 3~ pumps (mm) 1~ 3~ NKm 2/1 30 101 434 60 190 2 NKm 2/2 NKm 4/1 NKm 2/3 NKm 4/2 NKm 2/4 NKm 4/3 30 101 42 60 190 7 2 69 42 40 1307 670 NK 2/3 NK 4/2 NK 2/4 NK 4/3 30 101 470 60 190 91 2 69 469 467 40 1307 740 737 199

NK (1. 2.2 kw) POS. COMPONENT CONSTRUCTION CHARACTERISTICS 1 EXTERNAL SLEEVE Stainless steel AISI 304, complete with threaded delivery port in compliance with ISO 22/1 2 SUCTION FILTER Stainless steel AISI 304 3 MOTOR SLEEVE Stainless steel AISI 304 4 IMPELLERS AND DIFFUSERS Noryl GFN2V DIAPHRAGMS Stainless steel AISI 304, complete with anti-wear ring 6 MOTOR SHAFT Stainless steel EN 100-3 - 1.4104 7 TWO MECHANICAL SEALS SEPARATED BY AN OIL CHAMBER Seal Shaft Position Materials Model Diameter Stationary ring Rotational ring Elastomer MG1-19 Ø 19 mm Motor side Silicon carbide Graphite NBR MG1-1 SIC Ø 1 mm Pump side Silicon carbide Silicon carbide NBR BEARINGS 6304 2RS - C3 / 6203 ZZ - C3 9 CAPACITOR Pump Capacitance Single-phase (230 V or 240 V) NKm 2/ NKm 4/4 3 μf 40 VL NKm 4/ 0 μf 40 VL 11 1 10 ELECTRIC MOTOR NKm: single-phase 230 V - 0 Hz. Windings up to 1. kw with built-in thermal overload protector. The NKm4/ 2.2 kw pump is equipped with an external manual reset overload protector housed in the control box. NK: three-phase 400 V - 0 Hz. Insulation: F class. Protection: IP 6. 11 POWER CABLE 6 3 10 20 metre long DRINCABLE with removable connector for permanent immersion in drinking water 7 12 12 CONTROL BOX (for single-phase versions) 13 FLOAT SWITCH 4 9 2 13 200

DIMENSIONS AND WEIGHT DN PORT N DIMENSIONS mm kg Single-phase Three-phase DN STAGES Ø h 1~ 3~ NKm 2/ NK 2/ 6 612 26.7 23. NKm 4/4 NK 4/4 1¼ 13 2 26.0 24.4 NKm 4/ NK 4/ 7 642 30. 2.0 h Ø ABSORPTION VOLTAGE (single-phase) Single-phase 230 V 240 V NKm 2/ 9.0 A 9.0 A NKm 4/4 9. A 9. A NKm 4/ 14.0 A 14.0 A VOLTAGE (three-phase) Three-phase 230 V 400 V 240 V 41 V NK 2/ 6.2 A 3.6 A 6.2 A 3.6 A NK 4/4 6.2 A 3.6 A 6.2 A 3.6 A NK 4/. A 4.9 A. A 4.9 A PALLETIZATION GROUPAGE CONTAINER n H kg n H kg Single-phase Three-phase pumps (mm) 1~ 3~ pumps (mm) 1~ 3~ NKm 2/ NK 2/ 20 1100 1 493 40 2060 10 969 NKm 4/4 NK 4/4 20 1100 37 0 40 2060 10 993 NKm 4/ NK 4/ 20 1100 627 76 40 2060 1237 1136 201